CONCEALED TYPE LAVATORY CARRIER...Escutcheons provide manufacturers’ specified distance from wall...

Fixture Carriers

45

CONCEALED TYPE LAVATORY CARRIER

1. Tandem keepers in slots on the arm permit positioning of levelingscrews on the job to suit punchings of any lavatory specified.

2. Screws in keepers can then easily be moved up or down to levelthe lavatory.

3. The securing lock device is positioned on the arm and tightensagainst the fixture to hold it rigidly in place.

4. The sleeve can be adjusted to suit various wall thicknesses.

5. The final setting of the arm out from the wall can be madefrom the face of the finished wall after the wall is built.

6. The set screws are easily accessible for quicker adjustment.7. Arm with the locking device, tandem keepers, and adjustable

sleeve, is completely assembled at the factory.8. Hardware is plated to prevent corrosion.

Detail of parts of concealed arm carrier in or behind finished wall.

Detail of parts of concealed arm carrier.

Detail of securing method for concealed arm carrier.

Detail of leveling arrangement for concealed arm carrier.

For roughing dimensions for specific fixtures, please refer to the Josam website, www.josam.com.

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

46 Fixture C

arriers

The drawings on this page show the relationship between mating parts of carriers covered in this section.

Parts & Details Lavatory, Sink & Urinal Carriers


Fixture Carriers 47

(-66) OPTION, SPLIT HEADER FOR STAINLESS STEEL ARMSIn many cases arms are supplied by the manufacturers of stainless steel fixtures. The mounting hole spacing in the back of the arm (Y Dim.) varies widely by sink and manufacturer. The -66 split header is adjustable to allow for the mounting of this type of sink and arm combination.

(-75) OPTION, 2” ESCUTCHEONS (-76) OPTION, 4” ESCUTCHEONS

Escutcheons provide manufacturers’ specified distance from wall to back of a slab type lavatory to prevent water from deteriorating finished wall when concealed arms are used. Furnished in polished chrome.

(-77) OPTION, 6” ESCUTCHEONS also available.


48 Fixture C

arriers

2"

3 3/8"

2" C"

A"

F"

1/2" MIN 4" MAX

3 1/8"

1 1/2"

DATE OF LAST CHANGE:

USE OF SUPERSEDED OR VOID DATA.

SERIES

JOSAM COMPANYMICHIGAN CITY, INDIANA

NOTESDIMENSIONS ARE SUBJECT TO MANUFACTURERS

TOLERANCES AND CHANGE WITHOUT NOTICE.WE CAN ASSUME NO RESPONSIBILITY FOR

SPECIFICATION:JOSAM 17100 SERIES FLOOR-MOUNTED, SINGLE

WELDED FEET.

REFERENCE DRAWING A-08201-K

FLOOR-MOUNTLAVATORY CARRIER WITH CONCEALED ARMS, LEVELING

LAVATORY CARRIER

17100AND SECURING SCREWS, STRUCTURAL UPRIGHTS, AND CONCEALED ARM

-BB BACK-TO-BACK CARRIER (SEPARATE SUBMITTAL FOR THIS OPTION AVAILABLE)

-10 EXTENSION SLEEVES LONGER THAN STANDARD (SPECIFY WALL THICKNESS)

-60 VALVE PLATE FOR ATTACHING TO UPRIGHT

-67 CONCEALED ARM CARRIER FOR WHEELCHAIR LAVATORY

-75 2" CHROME PLATED ESCUTCHEONS



06/18/08

STANDARD ADJUSTABLESLEEVE 6-1/2"

C"

FINISHED WALLESCUTCHEON

4 1/2"

A _____________

BE SECURED TO FLOOR WITH 1/2"

C _____________

BOLTS AND ANCHORS BY OTHERS

AVAILABLE.

FINISHED FLOOR

2" ESCUTCHEON-75 OPTION SHOWN:

F _____________

BASED ON "A" DIM SHOWNRIM HEIGHT________

JOSAM RECOMMENDS THAT ALL FEET

FINISHED WALL

MANUFACTURER_______________

NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

: VARIABLE DIMENSION. DEPENDS ON FIXTURE.

REUSABLE ALIGNMENT TOOL

3"

8"

29"

ALIGNMENT TOOL POSITIONED FOR UPRIGHT SPACING AT TIE ROD

ALIGNMENT TOOLPOSITIONED FOR UPRIGHT SPACING AT FLOOR

EXAMPLE VIEW*CARRIER NOT INCLUDED

FIXTURE CARRIER

17000

REUSABLE ALIGNMENT TOOLJOSAM 17000 SERIES RE-USABLE ALIGNMENT TOOL FOR FLOOR MOUNTED FIXTURE CARRIERS WITH UPRIGHTS.

04/21/08


NOTESDATE OF LAST CHANGE:DIMENSIONS ARE SUBJECT TO MANUFACTURERS



SERIES

SPECIFICATION:


Fixture Carriers

49

A

2 3/4"

1 1/2"

F

2"

2"

2 3/4"

2"

C (13" MIN-22.5" MAX)

1 1/2"

5"

5"



SERIES

NOTES

DIMENSIONS ARE SUBJECT TO MANUFACTURERSTOLERANCES AND CHANGE WITHOUT NOTICE.

WE CAN ASSUME NO RESPONSIBILITY FOR

SPECIFICATION:

NUMBER

_______________

FINISHED WALL

17120

LAVATORY CARRIER

_______________SIZE

_______________

FINISHED FLOOR

CONCEALED ARMWALL-MOUNT

SECURING SCREWS, AND ADJUSTABLE WALL PLATE.

02/21/14

CARRIER WITH CONCEALED ARMS, LEVELING AND JOSAM 17120 SERIES WALL-MOUNTED, SINGLE LAVATORY

NAME_______________

DIMENSIONS

A _____________

C _____________

DENOTES VARIABLE. DIMENSION

F _____________

RIM HEIGHT ________

-75 OPTION

BASED ON "A" DIM SHOWN

ADJUSTABLE SLEEVE IS 4" LONG

CHROME PLATEDESCUTCHEON

DEPENDS ON FIXTURE. STANDARD

* SEPARATE SUBMITTAL FOR THIS OPTION AVAILABLE

MANUFACTURER

-BP* WITH BACK PLATES

-MMB* WITH MOVABLE MOUNTING BRACKETS

-10*EXTENSION SLEEVES LONGER THAN

STANDARD (SPECIFY WALL THICKNESS)




FINISHED WALL

1 1/2"5" MIN12" MAX

F"

1 1/2"

A"

F"

C"

2"

WALL

TO FLOOR WITH 1/2" BOLTS AND ANCHORS BY OTHERSJOSAM RECOMMENDS THAT ALL FEET BE SECURED

FINISHEDFLOOR

FINISHED

FINISHEDWALL

3 1/2"

3"

2" ESCUTCHEON-75 OPTION SHOWN:

WALLFINISHED

ESCUTCHEON

BACK-TO-BACK LAVATORY CARRIER WITH CONCEALEDARMS, LEVELING AND SECURING SCREWS, STRUCTURAL

LAVATORY CARRIERFLOOR-MOUNT

CONCEALED ARMUPRIGHTS AND WELDED FEET.

17100-BB

JOSAM 17100-BB SERIES FLOOR-MOUNTED,

REFERENCEDRAWINGA-08202-K

X -BB BACK TO BACK CARRIER

-10EXTENSION SLEEVES

LONGER THAN STANDARD (SPECIFY WALL THICKNESS)


-67 CONCEALED ARM CARRIER FOR WHEEL CHAIR LAVATORY





NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

A _____________

C _____________

F _____________

RIM HEIGHT __________


: VARIABLE DIMENSION. DEPENDS ON FIXTURE.REUSABLE ALIGNMENT TOOL AVAILABLE.

STANDARD ADJUSTABLE SLEEVE 6-1/2"

06/18/08DATE OF LAST CHANGE:


SERIES




SPECIFICATION:


50 Fixture C

arriers

C1 1/2"

F

2"

1" MIN

1 1/2"

F

1" MIN

6" MAX

A


NOTESDATE OF LAST CHANGE:


SERIES



SPECIFICATION:

ESCUTCHEON

STANDARD ADJUSTABLE SLEEVE 8-1/2"-75 OPTION

CARRIER WITH CONCEALED ARMS, LEVELING AND SECURING CONCEALED ARMJOSAM 17120-BP SERIES WALL-MOUNTED, SINGLE LAVATORY

DEPENDS ON FIXTURE. DENOTES VARIABLE DIMENSION

WALL-MOUNTSCREWS, ADJUSTABLE WALL PLATE AND BACK PLATE.

CHROME PLATED

LAVATORY CARRIER

17120-BP

X -BP WITH BACK PLATES


-75 2" CHROME PLATED ESCUTCHEONS-76 4" CHROME PLATED ESCUTCHEONS-77 6" CHROME PLATED ESCUTCHEONS


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

A _____________

C _____________

F _____________

RIM HEIGHT_________BASED ON "A" DIM. SHOWN

06/18/08

FINISHED WALL

FINISHED WALL

FINISHED FLOOR

5"

A

1 1/2"

F

6" MAX

2"

6" MAX

C1 1/2"

17120-10

LAVATORY CARRIER

-75 OPTION

CONCEALED ARM

FINISHED WALL

WALL-MOUNT

ESCUTCHEON

FINISHED FLOOR

CHROME PLATED

DENOTES VARIABLE DIMENSION DEPENDS ON FIXTURE. STANDARD ADJUSTABLE SLEEVE IS 8-1/2" LONG

-BP WITH BACK PLATES

X -10 EXTENSION SLEEVES LONGER THAN STANDARD (SPECIFY WALL THICKNESS)



NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

A _____________

C _____________

F _____________

RIM HEIGHT ________BASED ON DIM. "A" SHOWN

JOSAM 17120-10 SERIES WALL-MOUNTED, SINGLE LAVATORY CARRIER WITH CONCEALED ARMS, LEVELING AND SECURING SCREWS, AND ADJUSTABLE WALL PLATE.

06/18/08 JOSAM COMPANYMICHIGAN CITY, INDIANA



SERIES



SPECIFICATION:

5"

5"

FINISHEDWALL


Fixture Carriers

51

16 5/8"

2"

2"

ADJUSTABLE1 1/2"

06/03/08

ADJUSTABLE WALL PLATE

LAVATORY CARRIER

CONCEALED ARMWALL-MOUNT

17120-203-H

JOSAM 17120 SERIES WALL-MOUNTED, SINGLE LAVATORY CARRIER WITH CONCEALED ARMS, LEVELING AND SECURING SCREWS, AND

REF. NO.: M1456

FINISHED WALL

MAX.14 1/2"

5"


SERIES




SPECIFICATION:

(4) SECURING HOLESFOR 1/2" BOLTS7/8"

3 3/4"

1 1/4"

1 1/4"

2"

F

F

1 1/2"

1 1/4" MIN2 1/2" MAX

A

C1 1/2"

PLATE FURNISHEDBY OTHERS 11/16"

C

1 1/2"

DEPENDS ON FIXTURE

WALL PLATE BY OTHERS.

WALL-MOUNTCARRIER WITH CONCEALED ARMS, LEVELING AND SECURING SCREWS, AND MOVABLE MOUNTING BRACKETS FOR SECURING TO

STANDARD ADJUSTABLE SLEEVE IS 6 1/2"

CHROME PLATED

LAVATORY CARRIER

CONCEALED ARMJOSAM 17120-MMB SERIES WALL-MOUNTED, SINGLE LAVATORY

DENOTES VARIABL DIMENSION

17120-MMB

-75 OPTION

ESCUTCHEONX -MMB WITH MOVABLE MOUNTING BRACKETS



06/18/08


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

A _____________

C _____________

F _____________

RIM HEIGHT_________BASED ON "A" DIM. SHOWN



SERIES




SPECIFICATION:

FINISHED FLOOR

FINISHED WALL

5"

FINISHED WALL


52 Fixture C

arriers

4 1/2" MAX

1 1/2"

1" MIN

A

C

2"

"X"

FINISHEDWALL

FINISHEDFLOOR

3"

2 1/2"

3 1/8"


SERIES




SPECIFICATION: LAVATORY CARRIER

17380

FLOOR-MOUNT EXPOSED ARMJOSAM 17380 SERIES FLOOR-MOUNTED, SINGLE LAVATORY CARRIERWITH EXPOSED ACID-RESISTING WHITE COATED ARMS, LEVELING ANDSECURING SCREWS, STRUCTURAL UPRIGHTS, WELDED FEET ANDCHROME PLATED TRIM.

4/23/15

MANUFACTURER

NUMBER

SIZE

NAME

DIMENSIONS

A

C

RIM HEIGHTBASED ON "A" DIM SHOWN

REUSABLE ALIGNMENT TOOL AVAILABLE

-BB BACK-TO-BACK CARRIER

-HD HEAVY-DUTY

-VP VANDAL-PROOF TRIM

-10 STUDS FOR WALLS OVER 4-1/2" (SPEC. WALL THICKNESS)


-66 SPLIT HEADER FOR STAINLESS STEEL ARMS

RECOMMENDALL FEET BESECURED TOFLOOR WITH1/2" BOLTS ANDANCHORS BYOTHERS.

MODEL "X"-201 12 1/2"-203 15 1/2"

-507P 12 1/2"

FINISHEDWALL

4 1/2"

: VARIABLE DIMENSION.DEPENDS ON FIXTURE.STANDARD ADJUSTABLESLEEVE IS 4".

2"

C

F

2"1 3/8" MAX

1/2" MIN

F1 1/2"

A

1 3/8" MAX1/2" MIN

4"

LAVATORY CARRIER

17125

WALL-MOUNT CONCEALED ARMJOSAM 17125 SERIES WALL-MOUNTED, SINGLE LAVATORY CARRIERWITH CONCEALED ARMS, LEVELING & SECURING SCREWS AND STEELPLATE FOR ATTACHING TO STUDS.

4/23/15

MANUFACTURER

NUMBER

SIZE

NAME

DIMENSIONS

A

C

F

RIM HEIGHTBASED ON "A" DIM SHOWN

: VARIABLE DIMENSION.DEPENDS ON FIXTURE.STANDARD ADJUSTABLESLEEVE IS 4".

-10 EXTENSION SLEEVES LONGER THAN STANDARD (SPECIFY WALL THICKNESS)-75 2" CHROME PLATED ESCUTCHEONS

CHROME PLATED ESCUTCHEONS (-75)



SERIES




SPECIFICATION:

FINISHEDWALL

FINISHEDFLOOR

4"


Fixture Carriers

53

A

4-1/2 MAX1 MIN

1 1/2"

2"

"X"

C



SERIES




SPECIFICATION:

WALLFINISHED

FINISHEDFLOOR

3"

3 1/2"

BE SECURED TO FLOOR

-60

CARRIER WITH EXPOSED ACID-RESISTING WHITE COATED ARMS,

ANCHORS BY OTHERS.

FLOOR-MOUNT EXPOSED ARM

VALVE PLATE FOR ATTACHING TO UPRIGHT

FIXTURE


DEPENDS ON

WELDED FEET AND CHROME PLATED TRIM.

SPLIT HEADER FOR STAINLESS STEEL ARMS

WITH 1/2" BOLTS AND

17380-HD

RIM HEIGHT

VARIABLE -

JOSAM 17380-HD SERIES FLOOR-MOUNTED, SINGLE HEAVY-DUY SINK

____________

RECOMMEND ALL FEET

-66

BASED

-10

ON 'A' DIM SHOWN

STUDS FOR WALLS OVER 4-1/2" (SPEC. WALL THICKNESS)

SINK CARRIERLEVELING AND SECURING SCREWS, STRUCTURAL UPRIGHTS,

MANUFACTURER

_______________

NUMBER

_______________

SIZE

_______________

NAME

_______________

A ____________

C ____________

X -HD HEAVY-DUTY-BB BACK-TO-BACK CARRIER-VP VANDAL-PROOF TRIM

09/15/09

- 201 X = 16"- 203 X = 20"

FINISHED WALL

2"

C

A

5 MIN

1 1/2"

12 MAX

F

3 1/4"

17380-BB

NAME

LAVATORY CARRIERJOSAM 17380-BB SERIES FLOOR-MOUNTED, BACK-TO-BACK


LAVATORY CARRIER WITH EXPOSED ACID-RESISTING WHITE COATEDARMS, LEVELING AND SECURING SCREWS, STRUCTURAL UPRIGHTS,

ON 'A' DIM SHOWN

FLOOR-MOUNT EXPOSED ARM

WITH 1/2" BOLTS ANDBE SECURED TO FLOOR

WHEN REQUIRED

F ____________

RECOMMEND ALL FEET

ANCHORS BY OTHERS.

FIXTURE DEPENDS ON

OFFSET ARMS FURNISHED

VARIABLE -

A ____________

7/16/09

_______________

WELDED FEET AND CHROME PLATED TRIM.

C ____________

BASEDRIM HEIGHT

MANUFACTURER

_______________

NUMBER

_______________

SIZE

_______________

X -BB BACK-TO-BACK CARRIER-VP VANDAL-PROOF TRIM-10 STUDS FOR WALLS OVER 12" (SPECIFY WALL THICKNESS)-60 VALVE PLATE FOR ATTACHING TO UPRIGHT



SERIES




SPECIFICATION:

FINISHEDWALL

WALLFINISHED

FINISHEDFLOOR

3 1/2"

3"


54 Fixture C

arriers

1 1/2"

C

A

4 1/2

1 1/2"

3 1/4"

C _____________

BASED ON "A" DIM. SHOWN RIM HEIGHT_________


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

A _____________

FINISHEDWALL

WALLFINISHED

FINISHEDFLOOR

5"



SERIES




SPECIFICATION:

PLATED TRIM.

WALL-MOUNT EXPOSED ARM

DEPENDS ON FIXTURE.

LAVATORY CARRIERAND SECURING SCREWS, ADJUSTABLE WALL PLATE AND CHROME

* SEPERATE SUBMITTAL FOR THIS OPTION AVAILABLE

17390

WITH EXPOSED ACID-RESISTING WHITE COATED ARMS, LEVELINGJOSAM 17390 SERIES WALL-MOUNTED, SINGLE LAVATORY CARRIER

WHEN REQUIRED.OFFSET ARM FURNISHED

DENOTES VARIABLE DIMENSION

-BP WITH BACK PLATES*-VP VANDAL-PROOF TRIM-10 STUDS FOR WALLS OVER 4-1/2" (SPEC. WALL THICKNESS)

2/23/10

C

2"

13 MAX

1 1/2"

6 MIN

A


RECOMMEND ALL FEET

WITH 1/2" BOLTS ANDBE SECURED TO FLOOR

ANCHORS BY OTHERS.

VARIABLE - DEPENDS ON FIXTURE

SINK CARRIER

17380-BB-HD

FLOOR-MOUNT EXPOSED ARMJOSAM 17380-BB-HD SERIES FLOOR-MOUNTED, BACK-TO-BACKHEAVY-DUTY SINK CARRIER WITH EXPOSED ACID-RESISTING WHITE COATED ARMS, LEVELING AND SECURING SCREWS, STRUCTURAL UPRIGHTS, WELDED FEET AND CHROME PLATED TRIM.

8/17/09

MANUFACTURER

_______________

NUMBER

_______________

SIZE

_______________

NAME

_______________

A ____________

C ____________

F ____________

RIM HEIGHT 'F' BASEDON 'A' DIM SHOWN

-10 STUDS FOR WALLS OVER 13" (SPECIFY WALL THICKNESS)-60 VALVE PLATE FOR ATTACHING TO UPRIGHT-66 SPLIT HEADER FOR STAINLESS STEEL ARMS

X -BB BACK-TO-BACK CARRIERX -HD HEAVY-DUTY

-VP VANDAL-PROOF TRIM



SERIES




SPECIFICATION:

FINISHEDWALLWALL

FINISHED

FINISHEDFLOOR

3"

4 1/2"


Fixture Carriers

55

A

3 1/4"

C

1 1/4"

1 1/4"1 1/2" MIN1 7/8" MAX

1 1/2"

FINISHEDWALL

PLATE FURNISHEDBY OTHERS 11/16"



SERIES




SPECIFICATION:

PLATE BY OTHERS AND CHROME PLATED TRIM.

3/05/10

BASED ON "A" DIM. SHOWN

DIMENSIONS

LAVATORY CARRIER

17405

DEPENDS ON FIXTURE.

OFFSET ARM FURNISHED

A _____________

SECURING SCREWS, MOUNTING RODS FOR SECURING TO WALL

PLATE BY OTHERS.

FINISHED FLOOR

DIMENSION BASED ON 1/4"

FINISHED WALL

C _____________

JOSAM 17405 SERIES WALL-MOUNTED, SINGLE LAVATORY CARRIER

RIM HEIGHT_________

WALL-MOUNT EXPOSED ARMWITH EXPOSED ACID-RESISTING WHITE COATED ARMS, LEVELING AND

WHEN REQUIRED.


NUMBER_______________

SIZE_______________

NAME_______________


-VP VANDAL-PROOF TRIM-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)

1 1/4" MIN

4 1/2"

A

1 1/2"

3 1/4"

C1 1/2"

5"

SERIES






SPECIFICATION:

WITH EXPOSED ACID-RESISTING WHITE COATED ARMS, LEVELING

_______________

3/04/10

AND SECURING SCREWS, ADJUSTABLE WALL PLATE, BACK PLATES

17390-BP

BASED ON "A" DIM. SHOWN


WALL-MOUNT EXPOSED ARM

DEPENDS ON FIXTURE.

FINISHED WALL

C _____________

AND CHROME PLATED TRIM.

A _____________

DIMENSIONS

LAVATORY CARRIER

RIM HEIGHT_________

*SEPARATE SUBMITTAL FOR THIS OPTION AVAILABLE

JOSAM 17390 SERIES WALL-MOUNTED, SINGLE LAVATORY CARRIER

FINISHED FLOOR


NUMBER_______________

SIZE_______________

NAME

X -BP WITH BACK PLATES*-VP VANDAL-PROOF TRIM-10 STUDS FOR WALLS OVER 4-1/2" (SPEC. WALL THICKNESS)

OFFSET ARM FURNISHEDWHEN REQUIRED.

FINISHED WALL


56 Fixture C

arriers

4 MAX1 MIN

4 MAX1 MIN C

SERIES






SPECIFICATION: LAVATORY CARRIER

17550-BB

FLOOR-MOUNT HANGER PLATE

FINISHED FLOOR

X -BB BACK-TO-BACK CARRIER-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)-60 VALVE PLATE FOR ATTACHING TO UPRIGHT


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

B _____________

C _____________

RIM HEIGHT________BASED ON "B" DIM SHOWN

JOSAM 17550-BB SERIES FLOOR-MOUNTED, BACK-TO-BACK LAVATORYCARRIER WITH HANGER PLATES, ADJUSTABLE SUPPORTING RODS,STRUCTURAL UPRIGHTS AND WELDED FEET.

3/27/12

RECOMMEND ALL FEET BE SECURED TO FLOOR WITH 1/2" BOLTS AND ANCHORS BY OTHERS.

VARIABLE - DEPENDS ON FIXTUREEXCEPT WHEN STANDARD PLATE ISFURNISHED C = 18-1/4"

WALLFINISHEDFINISHED

WALL

2 1/2

3"

HANGERSFURNISHEDWITHFIXTURE

4 1/2

B

4 MAX1 MIN C

FINISHEDFLOOR

FINISHEDWALL

*SEPARATE SUBMITTAL FOR THIS OPTION AVAILABLE

2 1/2"

3"

HANGERFURNISHED

WITH FIXTURE

4 1/2"

B

BACK-TO-BACK CARRIER*

LAVATORY CARRIER

17550


-CL CORNER LAVATORY CARRIER*

UPRIGHTS AND WELDED FEET.

8/11/2009


WITH HANGER PLATE, ADJUSTABLE SUPPORTING RODS, STRUCTURALJOSAM 17550 SERIES FLOOR-MOUNTED, SINGLE LAVATORY CARRIER

-UR URINAL CARRIER*-WC WATER COOLER CARRIER*

_______________

NAME_______________

DIMENSIONS


B _____________


C _____________

FURNISHED C = 18-1/4"


EXCEPT WHEN STANDARD PLATE IS


NUMBER_______________

SIZE

-BB -WCBL WATER COOLER BI-LEVEL CARRIER*

-10 STUDS FOR WALLS OVER 4"(SPECIFY WALL THICKNESS)


SERIES






SPECIFICATION:


Fixture Carriers

57

C


SERIES




SPECIFICATION:

HANGERFURNISHEDWITHFIXTURE

B

4 1/2"

2 1/2"

3"

4" MAX1" MIN

STRUCTURAL UPRIGHTS AND WELDED FEET.

FINISHED

WATER COOLER CARRIER

17550-WC


B _____________

RECOMMEND ALL FEET BE SECURED TO FLOOR

C _____________

WITH 1/2" BOLTS AND ANCHORS BY OTHERS.

FINISHED

FURNISHED C = 18-1/4"EXCEPT WHEN STANDARD PLATE IS


FLOOR

DIMENSIONS

3/18/10

CARRIER WITH HANGER PLATE, ADJUSTABLE SUPPORTING RODS,

WALL

RIM HEIGHT________BASED ON "A" DIM SHOWN

JOSAM 17550-WC SERIES FLOOR-MOUNTED, SINGLE WATER COOLER


NUMBER_______________

SIZE_______________

NAME_______________

X -WC WATER COOLER CARRIER-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)

C

C _____________

17550-UR

JOSAM 17550-UR SERIES FLOOR-MOUNTED, SINGLE URINAL CARRIER


DIMENSIONS



3/17/10

WALL

WITH HANGER PLATE, ADJUSTABLE SUPPORTING RODS, STRUCTURAL

URINAL CARRIER




B _____________




RIM HEIGHT________

FINISHED

FINISHED FLOOR


NUMBER_______________

SIZE_______________

NAME_______________

X -UR URINAL CARRIER-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)



SERIES




SPECIFICATION:

FOR USE WITHBACK SUPPLY

FIXTURE

PLATE PUNCHED HANGERFURNISHEDWITH FIXTURE

B

4 1/2"

2 1/2"

3"

4" MAX1" MIN


58 Fixture C

arriers

1" MIN4" MAX

B

C

C

FINISHEDWALL

WITH FIXTUREHANGERS FURNISHED

FINISHEDFLOOR

3"

2 3/8"

4 1/2"

CARRIER FOR SUPPORTING CORNER TYPE LAVATORIES WITH HANGER PLATE, ADJUSTABLE SUPPORTING RODS, STRUCTURAL

LAVATORY CARRIER

17550-CL

RECOMMEND ALL FEET BE SECURED TO FLOORWITH 1/2" BOLTS AND ANCHORS BY OTHERS.


B _____________


DIMENSIONS

JOSAM 17550-CL SERIES FLOOR-MOUNTED, SINGLE LAVATORY


C _____________

_______________NAME

3/26/10


NUMBER_______________

SIZE_______________

X -CL CORNER LAVATORY CARRIER-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)-60 VALVE PLATE FOR ATTACHING TO UPRIGHT




SERIES




SPECIFICATION:

C'C1" MIN3 3/8" 4" MAX

3 5/8"



RODS, STRUCTURAL UPRIGHTS AND WELDED FEET.


FLOOR



17550-WCBL

JOSAM 17550-WCBL SERIES FLOOR-MOUNTED BI-LEVEL WATER COOLER CARRIER WITH HANGER PLATES, ADJUSTABLE SUPPORTING

FINISHED

UTILIZE A SINGLE ALIGNMENT TOOL TO ALIGN A PAIR OFUPRIGHTS. IF YOU WISH TO BRACE ALL THREE UPRIGHTSSIMULTANEOUSLY, TWO TOOLS ARE NECESSARY.

VARIABLE - DEPENDS ON FIXTUREEXCEPT WHEN STANDARD PLATE ISFURNISHED C' = 18-1/4"

3/19/10


NUMBER_______________

SIZE_______________

NAME_______________

B _____________

C _____________

C'_____________

E _____________

RIM HEIGHT________ BASED ON "B" DIM SHOWN

RIM HEIGHT'________ BASED ON "E" DIM SHOWN

X -WCBL BI-LEVEL WATER COOLER CARRIER-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)

MICHIGAN CITY, INDIANA



SERIES

JOSAM COMPANYDIMENSIONS ARE SUBJECT TO MANUFACTURERSTOLERANCES AND CHANGE WITHOUT NOTICE.


SPECIFICATION:

EB

4 1/2"

FINISHEDWALL

3"


Fixture Carriers

59

C4 MAX1 MIN

4 MAX1 MIN


SERIES




SPECIFICATION:

HANGERSFURNISHEDWITHFIXTURE

4 1/2

H

B J

LAVATORY CARRIER

17560-BB

FLOOR-MOUNT HANGER PLATEJOSAM 17560-BB SERIES FLOOR-MOUNTED, BACK-TO-BACK LAVATORYCARRIER WITH HANGER PLATES, ADJUSTABLE SUPPORTING RODS,STRUCTURAL UPRIGHTS, WELDED FEET, AND CHROME PLATED TRIM.

4/23/15


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

B _____________

C _____________

H _____________

J _____________




REUSABLE ALIGNMENT TOOL AVAILABLE.

X -BB BACK-TO-BACK CARRIER-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)-60 VALVE PLATE FOR ATTACHING TO UPRIGHT

FINISHED FLOOR

FINISHEDWALL

FINISHEDWALL

2 1/2

3"

C4 MAX1 MIN

HANGER FURNISHED

WITH FIXTURE

4 1/2"

J

B

H

FLOORFINISHED

FINISHED WALL

2 1/2"

3"

SEPARATE SUBMITTAL FOR THIS OPTION AVAILABLE

SERIES





SPECIFICATION:

FLOOR-MOUNT BEARING PLATE

LAVATORY CARRIER

17560

NAME

C _____________

B _____________


STRUCTURAL UPRIGHTS, WELDED FEET AND CHROME PLATED TRIM.

URINAL CARRIER

-WC

-UR


_______________


DIMENSIONS

VARIABLE - DEPENDS ON FIXTUREEXCEPT WHEN STANDARD PLATE IS


J _____________

H _____________


JOSAM 17560 SERIES FLOOR-MOUNTED, SINGLE LAVATORY CARRIERWITH HANGER & BEARING PLATE, ADJUSTABLE SUPPORTING RODS,


NUMBER_______________

SIZE_______________

-BB BACK-TO-BACK CARRIER -WCBL WATER COOLER BI-LEVEL CARRIER*

-10STUDS FOR WALLS OVER 4"(SPECIFY WALL THICKNESS)


2/28/2014


60 Fixture C

arriers

C4 MAX1 MIN

WITH FIXTUREFURNISHED

HANGER

BEARINGSTUDSNOTATTACHEDTO FIXTURE

B

H

4 1/2"

J

SERIES






SPECIFICATION:

FLOOR-MOUNT BEARING PLATEWATER COOLER CARRIER

17560-WC

B _____________

C _____________


TRIM.

11/10/2011


RODS, STRUCTURAL UPRIGHTS, WELDED FEET AND CHROME PLATED CARRIER WITH HANGER & BEARING PLATE, ADJUSTABLE SUPPORTING JOSAM 17560-WC SERIES FLOOR-MOUNTED, SINGLE WATER COOLER




J _____________

RIM HEIGHT________BASED ON "A" DIM SHOWN

H _____________


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

X -WC WATER COOLER CARRIER

-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)

FLOORFINISHED

FINISHED WALL

2 1/2"

3"

C

4 MAX1 MIN

C _____________

URINAL CARRIER

17560-UR

J _____________

RIM HEIGHT________



WITH HANGER & BEARING PLATE, ADJUSTABLE SUPPORTING RODS,

REUSABLE ALIGNMENT TOOL AVAILABLE VARIABLE - DEPENDS ON FIXTURE

JOSAM 17560-UR SERIES FLOOR-MOUNTED, SINGLE URINAL CARRIER


STRUCTURAL UPRIGHTS, WELDED FEET AND CHROME PLATED TRIM.


FLOOR-MOUNT BEARING PLATE

E _____________

H _____________


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

B _____________

X -UR URINAL CARRIER

-10HARDWARE FOR WALLS OVER 4",

SPECIFY WALL THICKNESS

3/25/2014

HANGER FURNISHED

WITH FIXTURE

BEARINGSTUDSNOTATTACHEDTO FIXTURE

H

4 1/2"

B

E

J

SERIES





SPECIFICATION:

FLOORFINISHED

FINISHED WALL

2 1/2"

3"


Fixture Carriers

61

B

FINISHED WALL

1/4

7 MAX


SERIES




SPECIFICATION:

WITH FIXTURE

SEPARATE SUBMITTAL FOR THIS OPTION AVAILABLE

HANGER(S) FURNISHED

FINISHED FLOOR

4

21 1/2

LAVATORY CARRIER

17590

WALL-MOUNT HANGER PLATEJOSAM 17590 SERIES WALL-MOUNTED, SINGLE LAVATORY CARRIERWITH HANGER PLATE AND ADJUSTABLE SUPPORTING RODS.

5/04/15


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

B _____________



-DP DOUBLE PLATE CARRIER-UR URINAL CARRIER-10 STUDS FOR WALLS OVER 7" (SPECIFY WALL THICKNESS)

C'

C

4" MAX.1" MIN.

4 1/2"

42 1/4"

F

B

D

E

SERIES





SPECIFICATION:

17560-WCBLFEET, AND CHROME-PLATED TRIM.ADJUSTABLE SUPPORT RODS, STRUCTURAL UPRIGHTS, WELDED COOLER CARRIER WITH HANGER AND BEARING PLATES, JOSAM 17560-WCBL SERIES FLOOR-MOUNTED BI-LEVEL WATER

∆ ______________

F ____________

MANUFACTURER _____________

NUMBER _____________

SIZE _____________

NAME _____________

RIM HEIGHT BASED ON'B' AND 'E' SHOWN

B ____________

C ____________

C' ____________

D ____________

E ____________

X -WCBL BI-LEVEL WATER COOLER CARRIER

-10 STUDS FOR WALLS OVER 4" (SPECIFY)

05/15/14

FINISHEDWALL

FINISHEDFLOOR

3 1/2"

3 5/8"

3"

RECOMMEND ALL FEET BE SECURED TO FLOORWITH 1/2" BOLTS AND ANCHORS BY OTHERS

USE SINGLE ALIGNMENT TOOL FOR PAIR OF UPRIGHTSFOR ALIGNING ALL 3 UPRIGHTS, 2 TOOLS ARE NECESSARY


62 Fixture C

arriers

B

FINISHED WALL

1/4

7 MAX


SERIES




SPECIFICATION:

WITH FIXTUREHANGER(S) FURNISHED

FINISHED FLOOR

4

21 1/2

URINAL CARRIER

17590-UR

WALL-MOUNT HANGER PLATEJOSAM 17590-UR SERIES WALL-MOUNTED, SINGLE URINAL CARRIERWITH HANGER PLATE AND ADJUSTABLE SUPPORTING RODS.

5/04/15


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

B _____________



X -UR URINAL CARRIER-10 STUDS FOR WALLS OVER 7" (SPECIFY WALL THICKNESS)

B

FINISHED WALL

4 (STANDARD)

1/4

1/2 MIN



SERIES




SPECIFICATION:


FINISHED FLOOR

4

21 1/2

LAVATORY CARRIER

17590-DP

WALL-MOUNT HANGER PLATEJOSAM 17590-DP SERIES WALL-MOUNTED, SINGLE LAVATORY CARRIER WITH HANGER PLATES AND ADJUSTABLE SUPPORTING RODS.

5/04/15


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

B _____________



X -DP DOUBLE PLATE CARRIER-10 STUDS FOR WALLS OVER 7" (SPECIFY WALL THICKNESS)


Fixture Carriers

63

C

1 MIN4 MAX

3 1/2"

1 1/2"

C-4

C+4OR B

4 1/2"

SINK CARRIER

17720

FLOOR-MOUNT HEAVY-DUTYJOSAM 17720 SERIES FLOOR-MOUNTED, SINGLE, HEAVY-DUTY SINKCARRIER WITH HANGER PLATE, ADJUSTABLE SUPPORTING RODS,ACID-RESISTING WHITE COATED ARMS, LEVELING AND SECURINGSCREWS, STRUCTURAL UPRIGHTS, WELDED FEET AND CHROMEPLATED TRIM.

4/23/15

FINISHEDFLOOR


RECOMMEND ALL FEET BE SECUREDTO FLOOR WITH 1/2" BOLTS ANDANCHOR BY OTHERS.

-VP VANDAL-PROOF TRIM-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)-66 SPLIT HEADER FOR STAINLESS STEEL ARMS (SEPERATE SUBMITTAL AVAILABLE



SERIES




SPECIFICATION:

FINISHEDWALL


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

A _____________

B _____________

C _____________

RIM HEIGHT________BASED ON "A&B" DIM SHOWN

A

3"

B


SERIES




SPECIFICATION: URINAL CARRIER

17590-UR-DP

WALL-MOUNT HANGER PLATEJOSAM 17590-DP SERIES WALL-MOUNTED, SINGLE URINAL CARRIER WITH HANGER PLATES AND ADJUSTABLE SUPPORTING RODS.

5/04/15


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

B _____________



X -DP DOUBLE PLATE CARRIERX -UR URINAL CARRIER

-10 STUDS FOR WALLS OVER 7" (SPECIFY WALL THICKNESS)

FINISHED WALL

4 (STANDARD)

1/4

1/2 MIN


FINISHED FLOOR

4

21 1/2


64 Fixture C

arriers

C

B

E

42 1/4"

6 1/8" MAX1 1/2" MIN

3 3/8"


SERIES




SPECIFICATION:

FINISHEDFLOOR

E_____________

D_____________

BASED ON "B" DIM SHOWN RIM HEIGHT________

SIZE_______________

NAME_______________

B _____________

C _____________


NUMBER_______________

REVERSE THESE TWO PLATESFOR BLOWOUTFIXTURES WITHTHREE BOLTMOUNT

D

19"

4 1/2"

SINK CARRIER

17730

FLOOR-MOUNT HEAVY-DUTYJOSAM 17730 SERIES FLOOR-MOUNTED, SINGLE, HEAVY-DUTY SINKCARRIER WITH SUPPORT PLATES, ADJUSTABLE COUPLING WITH 4"PIPING CONNECTION, MOUNTING STUDS, STRUCTURAL UPRIGHTS,WELDED FEET AND CHROME PLATED TRIM.

4/23/15

NOTES

DIMENSIONS MARKED1.VARY DEPENDING ON MOUNTED FIXTURE.RECOMMEND FEET BE 2.SECURED TO FLOOR WITH 1/2" BOLTS & ANCHORS BY OTHERS.

-VP VANDAL-PROOF TRIM-11 CAST IRON ADJUSTABLE EXTENSION (SPECIFY 6", 9" OR 12" ON ORDER)-60 VALVE PLATE FOR ATTACHING TO UPRIGHT

FINISHEDWALL

5/8"-11 THREADEDOR 1/2" THRU HOLE

4" THREADEDOUTLET

CONNECTION

3"

1" MIN4" MAX C

3 1/2"

4 1/8"

FINISHEDWALL


NUMBER_______________

SIZE_______________

NAME_______________

DIMENSIONS

B _____________

C _____________

H _____________



SERIES




SPECIFICATION: SINK CARRIER

17720-66

FLOOR-MOUNT HEAVY-DUTYJOSAM 17720-66 SERIES FLOOR-MOUNTED, SINGLE, HEAVY-DUTY SINKCARRIER WITH HANGER PLATE, ADJUSTABLE SUPPORTING RODS,BEARING STUDS, STRUCTURAL UPRIGHTS, WELDED FEET AND CHROME PLATED TRIM.

4/23/15

FINISHEDFLOOR


RECOMMEND ALL FEET BE SECUREDTO FLOOR WITH 1/2" BOLTS ANDANCHOR BY OTHERS.

-VP VANDAL-PROOF TRIM-10 STUDS FOR WALLS OVER 4" (SPECIFY WALL THICKNESS)

X -66 SPLIT HEADER FOR STAINLESS STEEL ARMS (SEPERATE SUBMITTAL AVAILABLE

B

4 1/2"

C+4

C-4OR

H

3"


Fixture Carriers

65

5 3/8" MAX7/8" MIN

3 3/8"

B

15 3/4"

42 1/4"

C=

E *

5/8"-11 THREADEDOR 1/2" THRU HOLE

CONNECTIONOUTLET

FINISHEDWALL

4" THREADED

CUT EXTENSION AS NEEDED

3"

SINK CARRIER

17735

FLOOR-MOUNT HEAVY-DUTYJOSAM 17735 SERIES FLOOR-MOUNTED, SINGLE, HEAVY-DUTY SINKCARRIER WITH SUPPORT PLATES, ADJUSTABLE COUPLING WITH 4" X 2" WASTE FITTING, MOUNTING STUDS, STRUCTURAL UPRIGHTS,WELDED FEET AND CHROME PLATED TRIM.

4/23/15

NOTES

DIMENSIONS MARKED1.VARY DEPENDINGON MOUNTED FIXTURE.RECOMMEND FEET BE 2.SECURED TO FLOOR WITH 1/2" BOLTS & ANCHORS BY OTHERS.

-4 VANDAL-PROOF TRIM-10 STUDS FOR WALLS OVER 5-3/8" (SPEC. WALL THICKNESS)-45 THREADED HIGH LEFT-HAND AUXILIARY VENT-46 THREADED HIGH RIGHT-HAND AUXILIARY VENT

NOTE: OTHER FITTINGS AVAILABLE UPON REQUEST. CONTACT YOUR JOSAM REPRESENTATIVE

* G FOR BLOWOUT CONFIGURATION


SERIES




SPECIFICATION:

FINISHEDFLOOR

D_____________

C _____________

B _____________

NAME

_______________

BASED ON "B" DIM SHOWN RIM HEIGHT________

E/G___________

_______________


NUMBER_______________

SIZEREVERSE THESE TWO PLATESFOR BLOWOUTFIXTURES WITHTHREE BOLTMOUNT

4 1/2"

19"

D

-46 (OPTION)-45 (OPTION)

4" 7 5/8"


CONCEALED TYPE LAVATORY CARRIER...Escutcheons provide manufacturers’ specified distance from wall...

Documents

Transcript of CONCEALED TYPE LAVATORY CARRIER...Escutcheons provide manufacturers’ specified distance from wall...