Company Profile CFO: Seinosuke Mizuno President: Mr. Akiara Mizuno Established: May, 1973 Location:...
-
Upload
branden-foyle -
Category
Documents
-
view
215 -
download
0
Transcript of Company Profile CFO: Seinosuke Mizuno President: Mr. Akiara Mizuno Established: May, 1973 Location:...
Company Profile CFO: Seinosuke Mizuno President: Mr. Akiara Mizuno Established: May, 1973 Location: Tokyo (Head-Quarter)
Nagoya Wire Products
Addcoat wire Indent wire Alcoat
Film Products JB8 / JB7 / JBB02 JBright (HT-C) JFlex (JFC-B)
90% of passenger vehicles use Nippon-Ply Addcoat wires in Japan
Productivity is increased. Since Addcoat wire has an effect of shrinkage inhibitors for resin, the annealing process after the production can be skipped. The parts can be shipped immediately.
Most effective shrinkage inhibitor for extrusions. In the extrusion process, it helps prevent the molded
parts from being distorted due to the effect of anti-shrinkage of plastic resin.
Addcoat Wires Products Line-up
Wire Size: 0.25mm & 0.40mm Application: PVC (AD-R-S)
Olefin (AD-O)
Synthetic Rubber 《 EPDM 》 (SP AD-EN) Wire type
・ AD ・・ Brass Wire
・ SPAD ・・ Brass Plated Steel Wire
Enables to cut the molded parts precisely during the extrusion.
Prevent the molded parts from shrinking or expanding.
Linear Stabilizer Design Flexibility Cost Reduction Pre-coated for adhesion to olefin,
vinyl, and rubber (EPDM) extrusion. Since the coefficient of linear
thermal expansion of molded parts is closed to the metal materials, the size of parts can be adjusted for the elasticity of body size
Patented
Indent Steel Flat Wire with Zincification
Indent wire prevents the molded resin parts from shrinking due to the anchor effect of indent.
Apply to a variety of resins. Since the coefficient of linear
thermal expansion of molded parts is almost the same as the one of the steel, the size of parts can be adjusted for the body size elasticity.
Environmentally Friendly
Coated both sides of Rigid Aluminum with adhisive
・ PVC Type ( A150W/A72W) ・ Olefin Type ( A150W-O) Shrinkage inhibitor for molded parts Improve the ease of assembling molded
parts It is possible to cut the molded parts
precisely during the extrusion. To prevent the extrusion molded parts
from winding It is possible to produce uniformly molded parts
Since the coefficient of linear thermal expansion of molded parts is closed to the metal material, the size of parts can be adjusted for the body size elasticity.
New Development
Indentwire 47WZ
0.47mm indentwire
AD-F-55WZ
0.55mm flat wire with adhesive
F-55WZ
0.55mm flat wire with zinc coating
SP-AD-70-O
0.70mm Diameter / steel wire w/ adhesive
*All samples are available
J-Bright Films
Market Share in Japan is more than 90 % Meets the quality requirement from parts suppliers in Japan. Over 15 years experience in Japanese market
Less Steel / Reduce the weight of molded parts Pass Chemical Resistance requirements in Japan Pass Xeon Arc(5000kj) and 2 years outside exposure tests in AZ and FL Since the high resistance stretching PET is used for the top layer, the
continuous extrusion feeding is possible. Since the transparent PET is used for the top later, the film can maintain the
high gloss appearance. PVC/ Olefin Type Film is available. ( Other resin type will be negotiable ) High Gloss/Matte Finish /Hairline Type is available. Free from the certain Environmental hazardous substances
J-Bright Films- Development History
JBright (HT-C) Film Many Japanese Parts Suppliers have already used this product The demand from overseas customers are increased.
JB7 Improve JBright (HT-C) in terms of flexibility and elasticity Chrome/Matte/Hariline/Black types are developed.
Coat Type JB7 Improve the weatherability and MAR resistance by coat layer Replacement of stainless Introduce new film types; matte finish and satin type
JB8 /JB8B02 JB8 is used by vacuum forming JB8B02 ---- Gloss 90
Target Applications:
Products Applications
HTC-A 150S-R Bumper Molding, Side Molding, Belt Molding, Window Upper Molding
HTC-A 150S-S Bumper Molding, Side Molding, Belt Molding, Window Upper Molding
HT-A-R Bumper Molding, Side Molding
HT-B02 Sash Molding, Belt Molding
FE-C150T-OBumper Molding, Side Molding, Flush Mount Molding, Door Edge Molding
JBMC150-R Roof Molding, Tire Cover Molding, Belt Molding
J-Bright Series / Applications
JBright Series
Used for LEXUS Model Non-Metallic Solution superior corrosion
resistance Environmentally Friendly Back Layer Resin
・ PVC/PP ( Other resin is also negotiable. )
Gloss Type ( HT-C) Black Type ( HT-B)
JFlex (JFC-B) Series
Hot press can be used Vacuum forming and injection
molding Superior transparency of the
surface layer providing high-quality brightness,
design properties, weather resistance and chemical resistance
The backing resin is colored black so that one layer has the function of both coloring and backing, providing a highly-lustrous black sheen.
PVC and PP types are available
JB7/8 Series (Chrome/Black)
BMW / 2011 Mini Countryman / Belt molding
• Superior scratch resistance• Superior weather resistance• Superior brightness• Superior corrosion resistance• Replaceable stainless steel/plating • Two types: PVC and PP• Superior design properties
Film Products Features( JB7/8 - HTC/JFLEX)
Gloss Value JB7/8 (Gloss Type) 459 ~ 461 HT-C (High Gloss Type) 449 ~ 456 JFlex (Black) 90 ~ 91
High Gloss Weatherability Anti-Corrosion Environment – JBright does NOT contain Lead,
Hexavalent Chromium, Mercury, or Cadmium
Nippon Ply Official Distributorin North AmericaSankyo America, Inc. --- Inventory Stock Point in North America
Address: 6101 West 80th Street, Indianapolis, IN 46278
Phone:317-824-0003
Fax: 317-824-0882
Contact: Yoshiaki Kurihara
Sales Rep in Michigan Jeff Saint
Ph: (269) 209-1516
Fax: (269) 841-4076