COLOR QUAD PROCESSOR

Model: SGQ4150

Please be sure to read carefully and follow all the safety information.

Keep the manual in a safe place for future reference.

www.strategicvista.com

Instruction Manual

INTRODUCTIONCongratulations on your purchase of the Color Quad Processor from Lorex.

The Color Quad Processor turns any monitor into a Quad monitor with security features. Connect up to four cameras to the Quad Splitter and view all four locations simultaneously in Real-Time (30 fps). The Quad Processor is an ideal security solution for small to medium sized commercial enterprises as it allows you to use an existing monitor as a 4 Channel Observation System.

Connect the Quad Processor to a Time Lapse VCR or DVR to capture footage and enable alarm recording. You can also connect PIR motion sensors to the Quad Processor in order to have Motion Detection capability, or you can utilize the system’s built-in Pixel-Based Motion Detection function.

To learn more about this system or to find out more about other products available, please visit our website at www.strategicvista.com

FEATURESColor Quad Processor Features

• Turns a slave monitor into a Quad system

• View up to 4 camera locations simultaneously in real-time (30 fps)

• Built-in video motion detection function

• Four Alarm Inputs for connection of external PIR sensors

• Viewing modes: Quad*Full-Screen*Auto Sequencing

• Picture in Picture, Zoom and Freeze options

• Video Loss alarm

• Built-in Key Lock protection

• On Screen Display: date*time*camera

• Event Log lists instances of video loss & alarms

• Individual camera adjustment of brightness / contrast / hue

• User selectable dwell time (1-30 sec)

• User selectable alarm duration (1-60 sec)

1

All the safety and operating instructions should be read before the appliance is operated. The improper operation may cause irreparable damage to the appliance.

• Please lift and place this equipment gently.

• Do not expose this equipment under to direct sunlight.

• Do not use this equipment near water or in contact with water.

• Do not spill liquid of any kind on the equipment.

• Do not unplug the power connector before turn the power off correctly.

• This equipment should be operated using only the power source from standard package.

• Unauthorized repair or parts substitutions may result in fire, electric shock or other hazards.

• Do not switch the Power On & Off within short period (within 3 seconds).

• Do not attempt to service this equipment by yourself. Refer all servicing to qualified service personnel.

• This unit should be operated only from the type of power source indicated on the manufacturer’s label.

• This installation should conform to all local codes.

SAFETY WARNING

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIED SERVICEPERSONNEL.

!

Explanation of two Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alertthe user to the presence of uninsulated "dangerous voltage" within the product's enclosure thatmay be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance-(servicing) instructions in the literature accompanyingthe appliance.!

2

TABLE OF CONTENTS PAGE

3

1. SYSTEM INCLUDES -----------------------------------------------------------------------------

2. FRONT PANEL CONTROLS -------------------------------------------------------------------

3. LED INDICATORS -------------------------------------------------------------------------------

4. MENU CONTROLS ------------------------------------------------------------------------------

5. MAIN MENU ----------------------------------------------------------------------------------------

6. MENU OPTIONS ----------------------------------------------------------------------------------

7. RS232 REMOTE PROTOCOL -----------------------------------------------------------------

8. BACK PANEL ---------------------------------------------------------------------------------------

9. TROUBLESHOOTING ---------------------------------------------------------------------------

10. TECHNICAL SPECIFICATIONS --------------------------------------------------------------

11. OPTIONAL ACCESSORIES -------------------------------------------------------------------

12. APPENDIX #1 – TYPICAL CONFIGURATION --------------------------------------------

13. APPENDIX #2 – CONNECTION TO A PIR MOTION SENSOR ----------------------

14. APPENDIX #3 – CONNECTION TO A LOREX TIME LAPSE VCRFOR ALARM RECORDING ----------------------------------------------

15. APPENDIX #4 – PIN CONFIGURATIONS FOR CONNECTION TO PC ------------

4

4

5

6

6

6

9

10

11

11

12

13

14

15

16

SYSTEM INCLUDES

Color Quad SplitterOwner’s Manual

12V DC Power Supply

CHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE COMPLETE SYSTEM, INCLUDING THE COMPONENTS SHOWN ABOVE.

4

FRONT PANEL CONTROLS

FUNC / EXITThis button serves 2 functions:1) Enables you to access Freeze and Menu modes. For example, to enter the Menu, press FUNC followed by MENU;2) Exits from Freeze and Menu modes.

/ ( ▲ ) Pressing this button goes to Full-Screen display of Camera 1. It also serves as the Up arrow key in Menu mode.

/ ( ▼ ) Pressing this button goes to Full-Screen display of Camera 2. It also serves as the Down arrow key in Menu mode.

/ ( ◄ ) Pressing this button goes to Full-Screen display of Camera 3. It also serves as the Left arrow key in Menu mode.

/ ( ► )Pressing this button goes to Full-Screen display of Camera 4. It also serves as the Right arrow key in Menu mode.

1.

2.

3.

4.

5.

9 Pin Alarm Connector

FUNC MENU AUTOFREEZE

VCR PLAY MENU

1 2 53 4 6 7 8

5

QUAD / PIP/POP / ( + ) This button serves 2 functions:1) Pressing this button once goes to Quad mode;2) Pressing this button from Quad mode goes to POP mode, and pressing it again goes to PIP mode. PIP/POP

options are programmable via the menu. Refer to pg. 8 for more detail;3) Pressing this button in Menu mode will increase the values of selected settings.

AUTO / FREEZE / ( - )This button serves 3 functions:1) Pressing this button initiates automatic sequencing between four all camera locations, in the following order:

CH1 CH2 CH3 CH4 QUAD CH1 ……..Note: Sequencing will automatically bypass a channel with a video loss if programmed accordingly. Refer to pg. ?? for more detail;

2) Pressing this button after pressing the Function button initiates Freeze mode. The letters FREZ followed by 1234 will appear at the top of the screen in Quad mode. Press a channel button, and that corresponding channel’s screen will freeze with the Channel number changing to an “F” in the on-screen display. You can then continue tofreeze and unfreeze individual channels by pressing their respective buttons;

3) Pressing this button in Menu mode will decrease the values of selected settings.

VCR PLAY / MENU / ENTERThis button performs the following functions:1) Press this button in order to enter VCR mode for viewing Playback from your VCR or DVR;2) Pressing this button after pressing the Function button brings up the Menu;3) In Menu mode, pressing this button selects a submenu option to be entered.

6.

7.

8.

1) After the Function button has been pressed, this red indicator illuminates.

2-5) When in Full Screen viewing, the LED that is ON is the channel being viewed (CH1 / CH2 / CH3 / CH4).

6) This LED illuminates when in Quad or PIP/POP viewing mode.

7) This LED illuminates when in Auto Sequencing or Freeze mode.

8) This LED illuminates when in VCR mode or when entering Menu mode.

LED INDICATORS

FUNC MENU AUTOFREEZE

VCR PLAY MENU

1 2 53 4 6 7 8

Above each button is a red LED indicator, which shows the system’s status, and reflects the last button that was pressed. Below is a summary of what each red LED indicator signifies:

6

MENU CONTROLSPressing the FUNCTION button followed by the MENU button brings up the Menu screen.Outlined below are the buttons used for navigation when using the Menu.

▲and ▼: ◄ and ►:+ and - : ENTER:EXIT:

MAIN MENUUpon entering the Menu, you will see the Main Menu screen shown to the right, containing8 submenus and a Reset Default option. Below is a description of each item:

System

Camera Set

Display

Auto Sequence

Alarm Set

PIP Set

Motion Set

Event List

Reset Default

Scroll up and down through menu options;Scroll sideways within a menu option;Increase or reduce a value of a menu option when editing itEnters a selected submenu;Exits a menu

(SETUP MENU)SYSTEMCAMERA SETDISPLAYAUTO SEQUENCEALARM SETPIP SETMOTION SETEVENT LIST

RESET DEFAULT

Changes the Date, Time and other system settings.

Changes the Titles of each camera and adjusts Picture settings.

Selects On-Screen Display options.

Selects Dwell Times and other settings related to Auto Sequencing.

Selects settings for External motion sensors as well as the Buzzer.

Selects the cameras and positioning to appear in PIP mode.

Selects Pixel-based Motion Detection settings.

Displays a list of Events including Alarms and Video Loss.

Pressing ENTER on this option Resets all system settings back to the factory Default settings (with the exceptions of Time and Date).

MENU OPTIONSSYSTEM

Date – Sets the correct date on the Quad Processor.

Time – Sets the correct time on the Quad Processor.

Date Form – Changes the format of the date display from USA (M-D-Y) to EURO (D-M-Y) or ASIA (Y-M-D).

(SYSTEM)Date 03-08-21

(YY-MM-DD)Time 22:45:27

(HH:MM:SS)Date Form ASIAKey lock ONRemote Control ONRemote Baud Rate 1200

Key Lock – Turning Key Lock to ON will “Lock” the buttons (excluding Menu activation), preventing other people from using the system.

Remote Control – Turning Remote Control ON enables you to control the Quad Processor from your PC via a RS232-C interface. Please refer to Appendix #4 for PIN configuration, and to pg. 9 for more information on Remote Protocol.

Remote Baud Rate – Set the speed of the remote computer’s Baud Rate - which is the rate of datatransmission. Available Baud Rates are: 1200, 2400, 4800, 9600.

CAMERA SET

Title – Changes the title of each camera location to a name of your choice (up to 8 characters).

Brit / Cont / Hue – Adjusts the Brightness / Contrast / Hue of eachcamera (from a level of 00 to 99).

DISPLAY

OSD Display – Turns the On-Screen Display ON/OFF.

Date – Selecting OFF removes the Date from the On-Screen Display.

Time – Selecting OFF removes the Time from the On-Screen Display.

Title – Selecting OFF removes the camera Titles from the On-Screen Display.

OSD Color – Changes the text color in the On-Screen Display.

Quad – Changes the width of the Quad Line.

Quad Line – Changes the color of the Quad Line.

Screen Display – Selecting OFF eliminates video on a channel.

AUTO SEQUENCE

Dwell – Sets the Dwell Time (the amount of time that each screen will appear beforeswitching) in Auto Sequencing mode (from 1-30 sec).

Loss CH Skip – Setting Loss Channel Skip to OFF makes Sequencing skip over channelswith a Video Loss in Auto Sequencing mode.

Sequence Number – Allows you to select the order in which Channel screens will appearin Auto Sequencing mode.

(CAMERA SET)

CAMERA TITLE BRIT CONT HUECH1 CAMERA01 61 48 81CH2 CAMERA02 61 48 81CH3 CAMERA03 61 48 81CH4 CAMERA04 61 48 81

(DISPLAY)

OSD Display ON DATE ONTIME ONTITLE ONOSD COLOR Green

QUAD 4 QUAD LINE white

Screen DisplayChannel 1 ONChannel 2 ONChannel 3 ONChannel 4 ON

(AUTO SEQUENCE)

CH1 DWELL 02SCH2 DWELL 02SCH3 DWELL 02SCH4 DWELL 02SQUAD DWELL 02S

LOSS CH SKIP ON

7

SKIPSKIPSKIPQUAD

NUM8 NUM7 NUM6 NUM5

CH4CH3CH2CH1

NUM4 NUM3NUM2 NUM1

ALARM SET

CH1-CH4 – Selects the type of Alarm Input for External motion sensors, specifying whether they are Normally Open (NO) or Normally Closed (NC). If no motion sensors are being connected, you can turn the Alarm setting to OFF.

Buzzer Duration – Selects the amount of time that a Buzzer will sound in the event ofan Alarm (1-60 sec).

Alarm Duration – Selects the amount of time that an Alarm will last after Motion Detectionis triggered (1-60 sec). Once the Alarm has expired, another Alarm can be triggered.

Buzzer Enable – Turning Buzzer Enable to OFF disables the Buzzer from sounding during an Alarm or a Video Loss.

Video Loss Buzzer – Turning Video Loss Buzzer to OFF disables the Buzzer from sounding during a Video Loss.Note: If Buzzer Enable is set to OFF, then no Buzzer will occur under any circumstance, regardless of whether Video Loss Buzzer is set to ON.

PIP SET

Full Channel – Selects which camera will appear as the Main screen in PIP mode.

PIP Channel – Selects which camera will appear as the Sub screen in PIP mode.

PIP Position – Selects the positioning of the Sub screen in PIP mode. The options are previewed on screen as you edit this setting.

MOTION SET

Sens – Sets the Sensitivity of the Pixel-based Motion Detection feature from 01 to 99.

DetNum – Sets the number of targets in which Motion must occur in order to trigger an Alarm (from 1-30 target areas).Note: DetNum cannot be less than the number of targets set in the AREA.

Refr – Sets the Reference image to which the current screen is compared (from 01-99). For example, the value 64 would compare the current image to the 64th

previous screen image

Area – Press the ENTER button on this option to set the Pixel-based Motion Detection Area for each channel.Green targets represent the Motion Detection Area, and Purple targets represent motion currently taking place. To modify the Motion Detection Area, use the following controls:

+: turns all targets in the selected row ON/OFF-: turns the selected target ON/OFF▲▼◄ ►: navigates between targetsENTER: turns all targets on the screen ON/OFF.

8

((ALARM SET)ALARM SET)

CAM1 N/OCAM1 N/O

CAM2 N/CCAM2 N/C

CAM3 OFFCAM3 OFF

CAM4 N/CCAM4 N/C

Buzzer Duration 03 SECBuzzer Duration 03 SEC

Alarm Duration 03 SECAlarm Duration 03 SEC

Buzzer EnableBuzzer Enable ONON

Video Loss Buzzer ONVideo Loss Buzzer ON

(PIP SET)FULL CHANNEL CH1 PIP CHANNEL CH2

PIP POSITION D\R

(MOTION SET)

CAMERA SENS DetNUM REFR DET CAM1 70 03 64 ON AREACAM2 70 03 64 OFF AREACAM3 70 03 64 OFF AREACAM4 70 03 64 ON AREA

9

EVENT LIST

An “Event” occurs during 1 of 3 incidents: Video Loss, External Alarm trigger, or Pixel-based Motion Detection.

This submenu displays a list of Events in order of their occurrence. Up to 16 Events are shown on a page. You can use the ◄ and ►to navigate between pages, or press the “-” to clear the Event record.

The following letters represent types of Events on the Event List:

A – External AlarmM – Pixel-based Motion Detection AlarmL – Video Loss

(EVENT LIST)

EVENT LIST-1

NO CH A/L YY-MM-DD HH:MM:SS 1 XX A XX-XX-XX XX-XX-XX2 XX M XX-XX-XX XX-XX-XX3 XX L XX-XX-XX XX-XX-XX. . . .. . . .

16 XX X XX-XX-XX XX-XX-XX

RS232 REMOTE PROTOCOLThe RS232 / Alarm input allows you to control the Quad Processor system from your PC. In order to achieve this, you will require an RS232 COM Port communication program installed on your PC. There are many of these software programs available on the internet, some of which are free.

The remote connection on the Quad Processor uses 8 data bits, 1 start bit, and 1 stop bit. Below is an example of the data stream with the control codes shown.

The PC keyboard simulates the Quad Processor’s keypad. For example, pressing “7f” will make the Quad Processor go to VCR mode. Note that the letters are case sensitive. Below is a list of corresponding keys, and their codes:

For further instructions on connecting the Quad Processor to your PC’s RS232 port, please refer to Appendix #4.

ASCII Function ASCII Functionbf AUTO fd FULL1df QUAD fb FULL2fe FUNC f7 FULL37f VCR ef FULL4

ACT – OxFF OxCO ID FUNCTION STOP – Ox7F

10

BACK PANEL

POWER INPUTConnects to the DC 12V Power Adapter.

VIDEO IN (Channels 1-4)Four BNC Video camera inputs, for Channels 1-4. Connect four cameras to these inputs.

VCR INReceives video from a VCR or DVR.

MONITOR OUTTransmits video to a slave monitor (a TV or a security monitor).

QUAD OUTTransmits video to a VCR or DVR.

RS232 / ALARM INPUT / EXTERNAL I/OConnects to an Alarm Block, which accommodates PIR Motion Sensor connection and enables Alarms.Alternatively, this output can serve as a Remote Protocol for control via a PC.

1.

2.

3.

4.

5.

6.

1VIDEO INPUT

2 3

500 mADC 12V

OUTQUADVCR4

IN OUTMONITOR ALARM

1 2 53 4 6

• Connect the video cable on Channel 1 before PowerON. The system will automatically detect electrical settings as PAL or NTSC.

Bad picture quality after Power ON

• You have entered VCR mode. To access the Menu, you need to press FUNC followed by MENU.

• Ensure that your VCR or DVR is connected as per thediagram provided in Appendix #1 and is receivingpower.

Blue screen appears after pressing the MENU button

• Check the power source cord connections• Check that there is power at the outlet

No Power

• If you are using a TV as a slave monitor, you may needto set the channel as AUX (or sometimes referred to as “TV / Video”).

• Please check if the wiring between the monitor and the Quad Processor is correct.

• Make sure that the camera is receiving power

Unable to view cameras

REMEDYPROBLEM

TROUBLESHOOTING

11

TECHNICAL SPECIFICATIONS

Because our products are subject to continuous improvement SVC reserves the right to modify product designs and specifications without notice and without incurring any obligations. E & O.E

Video input port 4 BNC camera inputs, 1 VCR input

Video output port 1 Quad output for VCR, 1 monitor output

Alarm input 4

Alarm output 1

Alarm duration 1 – 99 sec.

Camera Title 10 characters

Time / Date set Built-in real time clock

Dwell Time 1 – 30 sec.

RS-232 port Yes

Load impedance 75 Ohms

Operating environment 10~80%RH, 0oC~50oC

Power source DC 12V ± 10%, 500mA

Power consumption 6W maximum

Dimension (mm) 240(W) x 45 (H) x 150 (D)

Weight 1,300g

OPTIONAL ACCESSORIESThe following accessories are available to add to your existing system.

DIGITAL VIDEO RECORDER TIME LAPSE VCR

Record images digitally to a hard-disk drive. Record up to 1850 hours (30 hours real time). Use the Quick Search feature to find specific recordings.

Used to record key events. Select From a 40 hour real time or 960 Hour time lapse VCR

TO ORDER THESE ACCESSORY ITEMS OR FOR A COMPLETE LINE OF ACCESSORIESwww.strategicvista.com

SPECIALTY CAMERAS

Rotates camera up to 270°

NIGHTVISION

Weatherproof Night vision accessory. Allows you to see in the dark up to 35-40 distance (for use with B/W cameras)

Protects observation camera From the sun

Select from a wide assortment Of specialty cameras (dome, Weatherproof, bullet, Waterproof, etc.) to suit Individual needs

AUTO PAN

12

SUNSHADE HOUSING

Note: If using a TV as a slave monitor, it may have to be set in AUX mode (sometimes referred to as TV/Video)

THE COLOR QUAD PROCESSOR HAS BNC JACKS TO CONNECT TO OTHER VIDEOSOURCES. BNC COUPLERS AND VIDEO CABLES ARE NOT INCLUDED.

13

APPENDIX #1 – TYPICAL CONFIGURATION

1VIDEO INPUT

2 3

500 mADC 12V

OUTQUADVCR4

IN OUTMONITOR ALARM

APPENDIX #2 – ALARM BLOCK CONNECTIONto PIR MOTION SENSOR

14

PIR Motion Sensors

9 PIN Alarm Connector

Wires from the PIR Motion Sensors must be soldered to the contacts of the 9 Pin Alarm Connector.

Each PIR Sensor connects via 2 wires: 1 to a specific Channel and the other to the Ground input.For descriptions of each contact on the 9 Pin Connector of the Quad Processor, please refer to Appendix #4.

2

37

8

APPENDIX #3 – CONNECTION to a LOREX TIME LAPSE VCR FOR ALARM RECORDING

15

OUTQUADVCR

IN OUTMONITOR ALARM

Wires being run from the Time Lapse VCR’s or DVR’s alarm terminal must be soldered to the appropriate contacts of the 9 Pin Alarm Connector.

In addition to connecting up to 4 PIR Motion Sensors, connect the 9 Pin Alarm Connector to a security recorder such as the Lorex Time Lapse VCR shown below for Alarm Recording upon motion detection.

For descriptions of each contact on the 9 Pin Connector of the Quad Processor, please refer to Appendix #4.

4 5

APPENDIX #4 – PIN CONFIGURATIONS FOR CONNECTION TO A COMPUTER

16

25 PIN COM PORT

9 PIN COM PORT