QS29 High Resolution Color Quad Processor User Manual · 4 Channels Color Quad User's Manual To...
Transcript of QS29 High Resolution Color Quad Processor User Manual · 4 Channels Color Quad User's Manual To...
High Resolution Color Quad Processor
User Manual
4 Channels Color Quad User's Manual
5 . Freeze ....................................................................................................................... 16
6 . Auto Dwell ................................................................................................................ 17
7 . Digital Zoom ............................................................................................................ 17
4 Channels Color Quad User's Manual
Chapter 1 Introduction
1. Summarization
Dear users, thank you for choosing our 4 Channel Color Quad. In this manual we will
introduce you the features. installation and operation instructions. Hope that you will find
it's really easy and comfortable to use the product.
Note: All the infomation included in this manual is subject to change with out
prenotice.
2. Main Functions and Features
Time and date display enable optional and display position adjustable
Video loss alarm
Support 2 channel, PIP display, etc. display modes
Freeze small picture l i t e display mode
Freeze mail picture in live display mode
Camera title settable
Auto Dwell
Set p i c t u r e quality for each channel respectively
Playback image 4 times digital zoom
Live display image 4 time digital z o o m
Motion de t ec t and time period settable
4 channels Color Quad User's Manual
Chapter 2 System Connection
1. Real panel view
Video input: 4 video input connectors, support 4 cameras or other standard
video signal input
VCR input connector: connect to VCR's output connector for playback
4 channels video output connector: connect to VCR's input connector for
recording
Output monitor: connect to a monitor to take surveillance and display
corresponding information
DC input: please use DC 12V/1.2A adaptor
2. System Connection Illustration
4 Channels Color Quad User's Manual
Chapter 3 Display Modes
1. Display Modes
FULL
CAM1
PIP I
2. Explanation
1) FULL: full screen display mode for live display images or playback
images
2) QUAD: 4 channels display mode for live display or playback images
3) PIP: picture in picture mode. The main picture and small pictures are
changeable
4) 2PIP: picture in picture mode, with 2 small pictures. The main picture and
small pictures are changeable
5) 2CH-1: 2 channels vertical display mode. The two channels can be set as
any two channels. Press '3' and '4' to change the sizes of the channels
6 ) 2CH-2: 2 channels parallel display mode. The two channels can be set as
any two channels. Press '1' and '2' to change the sizes of the channels
7 ) 2CH-3: 2 channels display in the center. The two channels can be set as
any two channels. 5
4 Channels Color Ouad User's Manual
5 ) In PIP state, press it to enter 2CH-1 mode. Press i t again, to enter 2CH-2
mode. Again press it to enter 2CH-3 mode. And once again to enter 3POP mode.
3. PLAY
In live display mode, press this key, PLAY indicator light turns on, the main monitor
displays 'PLAY' on the top, and the system begins to play back. Press one o f ' 1 ', '2', '3' and
'4' to view the full screen image of corresponding channel, and once again press one of the
four buttons to freeze corresponding channel.
4. QUAD [ FREEZE]
1) In live display but not 4CH display mode, press this button to enter 4CH
display mode
2) Freeze a small picture: in 4CH live display mode, press this button,
FREEZE indicator light turns on. At this time, press '1' ' '2', 3' and '4' to freeze
corresponding channel's image, the monitor displays flashing FREEZE characters
on the channels, and the corresponding channel buttons indicator light flashes. Press
corresponding button again to defreeze, or wait for the system to defreeze
automatically after the freeze period.
5. ENTER 1 [AUTO]
1) When in menu setup state, press this key to enter a submenu
2) When in live display state but not menu setup state, press this key to enter
the auto dwell mode (the indicator light turns at this time), and press it again to exit
auto dwell mode (the indicator light turns off).
3) In MOTION SET state, press this key to set motion detection area
1) In 4CH display mode, press one of the buttons to enter full screen display
mode. In case FREEZE indicator light on, press one of the buttons to freeze specific
channel. 7
4 Channels Color Ouad User's Manual
In the bottom right side, it displays the version of the quad, e.g. 0032004102100
If no operation with the quad in 3 minutes, the system will automatically return to the
former display mode.
1. SYSTEM SET
Select SYSTEM SET and press 'ENTER' to enter SYSTEM SET submenu. Press ' t '
and ' 1 ' to move upward and downward of the cursor, press '+' and '-' to change and save
the parameters.
4 Channels Color Quad User's Manual
TIME: system time/date. YYYY/MM/DD (year/month/day); HH/MM/SS
(hour/minute/second)
FORMAT: date format [ASIA, asian format; U.S.: USA format; EURO:
European format]
LIVE TIME DISP: timeldate displayed position on the monitor
[TOP/TOP-LEFT/TOP - RIGHTNON]
BORDER DISP: boarder displayed color [GRAY/WHITE/BLACK/OFF]
BACK COLOR: background color [BLUE/BLACK]
BUZZER: buzzer alarm [ON/OFF]
ALARM TIME: alarm hold time [003-255 seconds]
FREEZE TIME: picture freeze time [000-255 seconds, 000 means freeze
forever]
TV FORMAT: system format [PAL/NTSC], default value PAL
4 Channels Color Quad User's Manual
2. CAMERA SET
Select CAMERA SET and press 'ENTER' to enter CAMERA SET submenu. Press ' t '
and ' 4 ' to move upward and downward of the cursor, press '+' and '-' to change and save
the parameters.
CAM: camera number
PICTURE DISPLAY: switch on/off the camera [ON/OFF]
TITLE DISPLAY: select to display the camera name [YES/NO]
AUTO TIME: auto dwell interval time [0-99 seconds, 0 means this will be
bypassed in auto dwell state]
MIRROR: camera video signal mirror [ON/OFF]
PICTURE QUALITY: picture quality
MOTION SWITCH: motion detection option [ON/OFF]
MOTION SET: motion detection setup
DETECT TIME: detection time period setup
4 Channels Color Quad User's Manual
3. PICTURE QUALITY
a CAM: camera number [1-4]
@ BRIGHT: brightness [0-255]
@ CONTRA: contrast [0-255]
@ CHROMA: chroma [0-255]
@ SHARP: sharpness [0-255]
@ DEFAULT: restore default setup
The picture changes as soon as any parameter has been changed. Press 'EXIT' to return
to the upper menu.
4. MOTION SET
Select MOTION SET and press 'ENTER' to enter MOTION SET submenu. Press ' t '
and ' 4 ' to move upward and downward of the cursor, press '+' and '-' to change and save
the parameters.
4 Channels Color Quad User's Manual
CAMERA: camera number [CAMl-CAM4]
CELSENS: the minimum cell numbers to trigger alarm [0-3]
LVSENS: cell sensitivity [00-15], the smaller the number, the more sensitive the
cells
REFFLD: real time refresh [NO/YES]
SPEED: object moving speed
TMPSENS: moving time refresh
SPSENS: moving distance refresh
To set motion detection area, press 'ENTER' and black boarders appears around the cell
on top right side. Then use ' 3. ', ' t ', '+'and '-' to move cursor downward, upward, leftward
and rightward. Press 'ENTER' to select or delete a green cell. Green color means valid
motion detection area. Press 'MENU' to save and exit.
5. EVENT LOG
Select EVENT LIST in the main menu, and press 'ENTER' to enter EVENT LIST
submenu.
4 Channels Color Quad User's Manual
NO: event number, 001 -100
CAM: camera name
DATE: event date
TIME: event time
EVENT: event causes [LOSS: video loss alarm; MOTION: motion detection
alarm; P - ON: opening record]
PREVIOUS: previous page. Every page displays 10 events, and total maximum
10 pages. Press ENTER or ' t ' to turn to the previous page.
NEXT: next page. Every page displays 10 events, and total maximum 10 pages.
Press ENTER or ' 1 ' to turn to the previous page.
ERASE: erase all the records, and start from 001.
6. CONFIRM RESET
4 Channels Color Quad User's Manual
To restore the factory default settings, select YES, and press ENTER to confirm. Select
NO and press ENTER to exit.
Chapter 6 Function Operations
1. Video Loss Alarm
When the video signal lost, the buzzer will ring (optional), the monitor displays 'LOSS'
and the indicator light flashes. Press any key or after the video signal restoring, the buzzer
will stop.
2. Motion Detection Alarm
Once users have enabled motion detection, if there is motion in the images, buzzer 15
4 Channels Color Quad User's Manual
will ring (optional), corresponding channel will display 'MOTION' and indicator light
flashes. Press any key or after the alarm time, the buzzer will stop.
3. Confirm Alarm
There are two methods to confirm an alarm, manual and auto. When in menu setup
mode, playback states, users should have to wait for the system to confirm the alarm (the
warning message characters and indicator lights will always there except users make manual
confirmation). In any case, if no manual confirm, when the alarm period's passed, the
system will make auto confirmation.
( I ) Confirm buzzer alarm:
When buzzer rings, press any key, and the buzzer stops. If there happens more alarms
continuously in the buzzer alarm period, the buzzer won't ring for a longer time.
(2) Confirm alarm message characters:
When alarm occurs, press the corresponding channcl button (1,2,3 and 4) to erase the
alarm message. If there are continuous alarms, press corresponding channel button to erase
alarm message and stop the indicator light, but after a few time, message will appear again.
4. Playback
In real display state, and NOT in MENU setup, AUTO modes, press 'PLAY' key, the
PLAY indicator light turns on, monitor displays PLAY characters, and recorder machine
begins to playback. If no playback signal, the monitor displays 'NO PLAY VIDEO'. In
playback state, press 'PLAY' button to return to live display state, and PALY indicator light
turns off.
5. Freeze
When in 4CH live display mode, press 'QUAD' and FREEZE indicator light turns on. The
system now is in freeze state. Press ' l ' , '2', '3' and '4' to freeze corresponding channel, and
character string 'FREEZE' appears in the channel. Then press the number button again to
defreeze the channel. In PIP, 3POP and full screen mode, press the corresponding main
image's number button to freeze the main channel, and press again to defreeze. 16
4 Channels Color Ouad User's Manual
6. Auto Dwell
In live display state, prcss 'AUTO', AUTO indicator light on, and the system enter
auto dwcll mode with corresponding channel indicator light on. The auto dwell time interval
is adjustable in submcnu AUTO TIME in menu CAMERA SET. Press AUTO again to exit
auto dwcll modc.
7. Digital Zoom
In full scrcen live display mode or 4CH display mode, press 'AUTO' key for over 2
seconds, the indicator light tlashes, and the monitor displays 1 I4 of the zoomed image. Press
' 1 ', ' f ', '+'and '-' to see other part of the zoomed image. Press AUTO again, ZOOM
indicator light off and exit zoom state.