Coliere RACI

8/11/2019 Coliere RACI

1/24

SPACERS FOR PIPELINES

CASED CROSSINGS

12


2/242 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]

RACI was founded in 1952, pipeline division for spacers is the result of 30 years of experience.According to our philosophy, the keys to the continuous success of our products are: our capacityto respond to any specific customer or market request, our keen attention to details and thebalanced interaction between quality and service.

This philosophy implies that a lot of attention has always been paid to the research carried outby RACI R&D dept. This big consideration for advanced research has been rewarded by both theincomparable performance of our spacers and by the excellent world wide reputation of RACI.


3/24Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 3

Introduction

must ensureelectrical insulationbetween the carrierpipe and the

casing pipe.

Raci spacers havebeen applied in the

main worldwidecrossings

must guarantee aneasy insertion of thecarrier into thecasing pipe

preventing damageof carrier pipecoating.

must permit to betightly fastenedonto carrier pipesin order to avoid

horizontalmovements duringinsertion.

must be madeof material whichdoes not conductelectricity and which

ensures permanentresistance tochemical corrosion.

must be resistant tomechanical andthermal shocks andstresses, particularly

those that occurduring both theinstallation and theinserting operation.

In many countries pipelines crossing or running parallel to highwaysand railways shall be protected by casing. Spacers are used in order to separate thecarrier pipeline from the casing. Raci casing Spacers isolate water, sewer and gaspipelines from casing simply and effectively. Insulators are required to separate casingand carrier pipes according to the following requirements:

spacers



Spacers aremanufacturedentirely out ofhigh densitypolyethylene (HDPE).No metal boltsor attachments arerequired.

The modular systemwhich permits tocompose insulatorrings allows spacersto be used on awide pipe diameterrange thereforereducing inventorycosts.

Spacers arequickly and easilyassembled bymanually fittingelements one intothe other.

The tooth insertionmethod allowson site adjustmentsto fit a wide rangeof pipe diameters.

A low fric tioncoefficientguarantees an easyinsertion into thecasing.

Spacers aredesigned and testedto maintaincontinuous and

long term supportfor the carrier pipeand its contents.

Spacers provide aconstant projectionaround the entirecircumference of

the carrier pipe.

Spacersprovide long termprotection fromcorrosion.

Spacers can beinstalled onsteel-coated pipes,concrete pipes,

ductile iron pipesor plastic pipes.

Special applications

For applications with a continuous temperature above 60 C Nylon spacers are available.Customized versions can also be manufactured with other types of polymers accordingto mechanical and thermal requirements.

Raci spacer elements are the result of a deep structural analysis and of computer-assisteddesign and manufacturing which represent the best compromise between mechanical

resistance and material used. No metallic parts are involved for their assembly.Each element represents a flexible section with a toothed male strap at one endand an appropriate toothed female slot on the other end.This design allows on site adjustments for variances within the O.D. range and permitsto cover all types of pipes within the global range which goes from 30 to 3414 mm.

The advantages of RACI spacers

Spacers are divided into six models which address a wide range of pipe sizes.All of the elements are designed according to different applications.They must in fact ensure different static and dynamic characteristics in orderto guarantee the safest job on site.Each grouping offers varying support heights which allow spacers to clear bell joints,flanges, couplings or simply to offer a better centring.

The available height range goes from 15 to 130 mm.


5/24

Selection guidelinesBasic dimensions

Exact carrier pipe Outside Diameter(O.D.) including the coating film

Exact casing pipeInternal Diameter (I.D.)

Exact bell, flangeor coupling O.Db (bell)

O.D. I.D. O. D. I .D.O.DbBELL

Spacers for pipelines / Cased crossingswww.raci.it - [email protected] 5

HPDE characteristics

In order to choose the right element you only need the O.D. carrier pipe.

Yield strength * > 22 N/mm2 UNI EN ISO 527-2

Tensile strength* > 16 N/mm2 UNI EN ISO 527-2Elongation at break * > 400% UNI EN ISO 527-2

Hardness shore D 64 ASTM D 2240

minimum working temperature -20 C

minimum stocking temperature -20 C

Dielectric strength > 37 kV/mm ASTM D 149/64

UVL stabilization good

* on test specimen with extruded material

TABLE Aphysical

characteristicsof High Density

Polyethylene


6/24

A

B

6 Spacers for pipelines / Cased crossingswww.raci.it - [email protected]

TABLE B3elements A/B

TABLE B1elements S/T

TABLE B2elements C/D/I

S

T

D

C

I

55

60

68

85

90

98

118

125

140

158

178

200215

239

245

64

70

77

98

106

116

132

140

158

180

200

240242

272

281

2,17

2,36

2,68

3,35

3,54

3,86

4,65

4,92

5,51

6,22

7,01

7,878,46

9,41

9,65

2,52

2,76

3,03

3,86

4,17

4,57

5,20

5,51

6,22

7,09

7,87

9,459,53

10,71

11,06

-

1

2

-

1

3

-

1

4

2

5

-6

6

7

2

1

-

3

2

-

4

3

-

3

-

7-

1

-

2,0

2,0

2,0

2,0

2,0

2,0

2,0

2,0

1,5

1,5

1,5

1,51,5

1,5

1,5

2,0

2,0

2,0

2,0

1,5

1,5

1,5

1,5

1,5

1,5

1,5

1,51,5

1,0

1,0

6,5

6,5

6,5

6,5

6,5

6,5

6,5

6,5

5,0

5,0

5,0

5,05,0

5,0

5,0

6,5

6,5

6,5

6,5

5,0

5,0

5,0

5,0

5,0

5,0

5,0

5,05,0

3,5

3,5

MIN(mm)

MAX(mm)

MIN(in)

MIN(in) A B GAS

(m)

WATER GAS

(ft)

WATER

RECOMMENDEDSPACING BETWEEN

INSULATORS

CARRIER PIPE O.DELEMENTSTO MAKE

ONE INSULATOR

30

38

59

69

76

88

103108

115

121

133

141

147

153

35

43

68

75

84

102

107114

120

132

140

146

152

168

1,18

1,50

2,32

2,72

2,99

3,46

4,064,25

4,53

4,76

5,24

5,55

5,79

6,02

1,38

1,69

2,68

2,95

3,31

4,02

4,214,49

4,72

5,20

5,51

5,75

5,98

6,61

1

-

2

1

-

3

21

-

4

3

2

1

-

-

1

-

1

2

-

12

3

-

1

2

3

4

2,0

2,0

2,0

2,0

2,0

2,0

2,02,0

2,0

1,5

1,5

1,5

1,5

1,5

2,0

2,0

2,0

2,0

2,0

2,0

1,51,5

1,5

1,5

1,5

1,5

1,5

1,5

6,5

6,5

6,5

6,5

6,5

6,5

6,56,5

6,5

5,0

5,0

5,0

5,0

5,0

6,5

6,5

6,5

6,5

6,5

6,5

5,05,0

5,0

5,0

5,0

5,0

5,0

5,0

MIN(mm)

MAX(mm)

MIN(in)

MIN(in) S T GAS

(m)

WATER GAS

(ft)

WATER


INSULATORSCARRIER PIPE O.D

ELEMENTSTO MAKE

ONE INSULATOR

42

58

81

100

134

171

52

80

99

133

170

200

1,65

2,28

3,19

3,94

5,28

6,73

2,05

3,15

3,90

5,24

6,69

7,87

-

1

-

1

1

-

1

-

-

1

-

-

1,5

1,5

1,5

1,5

1,0

1,0

1,5

1,5

1,0

1,0

1,0

1,0

5,0

5,0

5,0

5,0

3,0

3,0

5,0

5,0

3,0

3,0

3,0

3,0

MIN(mm)

MAX(mm)

MIN(in)

MIN(in) C

-

-

1

-

1

2

D IGAS

(m)

WATER GAS

(ft)

WATER



ELEMENTSTO MAKE

ONE INSULATOR

Table of elements

Elements needed to make one insulator ring


7/24

TABLE B4elements F/G

TABLE B5

elements M/N and P/Q

221269

321

367

421

466

531

631

731

831

910

1031

1160

1361

1601

18002111

2431

2861

268320

366

420

465

530

630

730

830

910

1030

1159

1360

1600

1799

21102430

2860

3414

8,710,59

12,64

14,45

16,57

18,35

20,91

24,84

28,78

32,71

35,83

40,59

45,67

53,58

63,03

70,8783,11

95,71

112,64

10,5512,6

14,41

16,54

18,31

20,87

24,8

28,74

32,68

35,83

40,55

45,63

53,54

62,99

70,83

83,0795,67

112,6

134,41

23

3

4

4

5

6

7

8

9

10

11

13

15

17

2023

27

32

1-

1

-

1

-

-

-

-

-

-

-

-

-

-

--

-

-

2,52,5

2,5

2,5

2,5

2,5

2,0

2,0

2,0

2,0

2,0

2,0

2,0

2,0

2,0

2,01,5

1,5

1,5

2,52,5

2,5

2,0

2,0

2,0

2,0

2,0

1,8

1,8

1,5

1,5

1,2

1,2

1,0

0,80,6

0,5

0,4

8,08,0

8,0

8,0

8,0

8,0

7,0

7,0

7,0

7,0

7,0

7,0

7,0

7,0

7,0

7,05,0

5,0

5,0

8,08,0

8,0

7,0

7,0

7,0

7,0

7,0

6,0

6,0

5,0

5,0

4,0

4,0

3,5

2,62,0

1,6

1,3

MIN(mm)

MAX(mm)

MIN(in)

MIN(in)

E HGAS

(m)

WATER GAS

(ft)

WATER

TABLE B6elements E/H

G

F

N

M

H

E

(*) N.A. NOT APPLICABLE FOR P AND Q TYPE




ELEMENTSTO MAKE

ONE INSULATOR

143

169

202

228

253

287

312

338

396

422

506

591675

760

850

168

201

227

252

286

311

337

395

421

505

590

674759

915

1015

5,63

6,65

7,95

8,98

9,96

11,3

12,28

13,31

15,59

16,61

19,92

23,2726,57

29,92

33,46

6,61

7,91

8,94

9,92

11,26

12,24

13,27

15,55

16,57

19,88

23,23

26,5429,88

36,02

39,96

1

2

1

2

3

2

3

4

4

5

6

78

9 (*)

10(*)

1

-

2

1

-

2

1

-

1

-

-

--

- (*)

- (*)

2,5

2,5

2,5

2,5

2,5

2,0

2,0

2,0

2,0

2,0

2,0

2,01,5

1,5

1,5

2,5

2,5

2,5

2,0

2,0

2,0

2,0

2,0

2,0

2,0

1,5

1,51,5

1,0

1,0

8,0

8,0

8,0

8,0

8,0

7,0

7,0

7,0

7,0

7,0

7,0

7,05,0

5,0

5,0

8,0

8,0

8,0

7,0

7,0

7,0

7,0

7,0

7,0

7,0

5,0

5,05,0

3,5

3,5

MIN(mm)

MAX(mm)

MIN(in)

MIN(in)

M / P N / QGAS

(m)

WATER GAS

(ft)

WATER

RECOMMENDED

SPACING BETWEENINSULATORSCARRIER PIPE O.D

ELEMENTS

TO MAKEONE INSULATOR

92

116153

189

225

261

296

314

377

447

115

152188

224

260

295

313

376

446

528

3,62

4,576,02

7,44

8,86

10,28

11,65

12,36

14,84

17,60

4,53

5,987,40

8,82

10,24

11,61

12,32

14,80

17,56

20,79

1

22

3

3

4

4

5

6

7

1

-1

-

1

-

1

-

-

-

2,5

2,52,5

2,5

2,0

2,0

2,0

2,0

2,0

2,0

2,5

2,52,0

2,0

2,0

2,0

2,0

1,5

1,5

1,5

8,0

8,08,0

8,0

7,0

7,0

7,0

7,0

7,0

7,0

8,0

8,07,0

7,0

7,0

7,0

7,0

5,0

5,0

5,0

MIN(mm)

MAX(mm)

MIN(in)

MIN(in) F G GAS

(m)

WATER GAS

(ft)

WATER



ELEMENTSTO MAKE

ONE INSULATOR


8/24

The spacing of the rings must ensure that the carrier pipe is fully supported throughoutits length, this calculation is related to the carrying capacity of the elements and it isresumed in the tables of range. To ensure against the effects of differential loading atthe entrance and exit points of the casing, two rings are to be provided at the beginningand at the end of the crossing segment, regardless the sizes of the pipe.Where mechanically joined pipes, flanges, couplings or bells are involved, rings must beinstalled within 0,3 m on each side of the bell.

Rings spacing

Simplified choices

Length of crossing and linearweight of filled carrier pipe

up to 3 S/T C/D/I -from 3 to 5 A/B S/T C/D/I

from 5 to 12 F/G A/B M/N

from 12 to 24 M/N E/H F/G

over 24 E/H M/N -

CARRIER PIPE DN (inches) ALTERNATIVE SOLUTIONSTABLE C

suggested choices

for all carrier pipeO.D. values

RECOMMENDED SOLUTION

The exact number of elements N2 comes from the following formula:

The total number of elements for each crossingNtot

is:

How to calculate the number of rings

N2 =LI

+ 3L crossing

length

I spacing as pertables pg. 6-7

N2 Requiredrings

Ntot = N1 x N2 N1elements to make one insulatoras per tables pg. 6-7




How to choose the height of the elements

The basic calculation in order to define maximum spacer height is the following:

double spacerat each end bell casing

( carrier pipe OD ) + ( 2x height of element ) + ( clearance 12 to 15 mm ) < ( casing ID )

In case of carrier pipes made of ductile iron or pipes with flanged junctions, the heightof each element must be above the mechanical joint (bell or flange) too.

( carrier pipe OD ) + ( 2x height of element ) > ( bell O.D. + clearance 20 mm )

Exact carrier pipeO.D. includingthe coating film

Exact casingpipe I.D.

Exact bell,flange or couplingO.D. (bell)

The spacers elements are also available in different heights except for the C-D-I-S-Tmodel, in order to either clear the mechanical joints or simply to obtain a better centring

between carrier and casing pipes.

Usefullength

(mm)

(in)

Width(mm)

(in)

Height(mm)

(in)

Carryingcapacity

Carryingcapacity

94 - 110 119 - 135 113 - 128 95 - 110 180 - 250 240 - 310 130 - 160

3,7 - 4,33 4,68 - 5,32 4,45 - 5,04 3,74 - 4,33 7,08 - 9,84 9,45 - 12,2 5,12 - 6,30

85 100 63

3,35 3,94 2,48

20 19 - 36 - 50 15

0,79 0,75 - 1,42 - 1,97 0,59

ELEMENTS S T A B C D ITABLE D

technical datas

(Kg)

(lbs)

(Kg)(lbs)

execution HDPE (23 C)

execution NYLON or POLYPROPILENE(100 C)

110 180 100

242 397 220,46

20 32 1844 71 40

Usefullength

(mm)

(in)

Width(mm)

(in)

Height

(mm)

(in)

Carrying

capacity

Carryingcapacity

197 - 237 91 - 129 265 - 320 185 - 240 280 - 335 130 - 185 265 - 320 185 - 240

7,76 - 9,33 3,58 - 5,08 10,43 - 12,60 7,28 - 9,45 11,02 - 13,19 5,12 - 7,28 10,43 - 12,60 7,28 - 9,45

130 180 225 180

5,12 7,09 8,86 7,09

25 - 41 18 - 25 - 36 - 41 25 - 41 - 60 - 75110 - 12060 - 75 50 - 75 - 90 90 - 110 - 130

0,98 - 1,61 0,71 - 0,98 - 1,42 - 1,61 0,98 - 1,61 - 2,36 - 2,954,33 - 4,722,36 - 2,95 1,97 - 2,95 - 3,54 3,54 - 4,33 - 5,12

ELEMENTS F G M N E H P Q

(Kg)

(lbs)

(Kg)

(lbs)

execution HDPE (23 C)

execution NYLON or POLYPROPILENE(100 C)

500 1000 2750 1000

1102 2204 6061 2204

80 180 500 180

176 397 1102 397


10/24

Tape for plastic pipesIn case of plastic carrier pipe (PVC, PE and similar), it is suggested to tape the contact

area between the ring insulator and the carrier pipe, this precaution will avoid anyhorizontal sliding of the rings on the carrier pipe during the inserting operations.The following table resume the required quantity of tape for each insulating ringreferred to the different size of pipes.

Please note that the above quantities concerning tape consumption are calculated considering:up to DN 6 rolls height 50 mm - for DN > 6 rolls height 100 mm

Heavy-duty applicationsIn case of very long crossings >150 m or for very heavy carrier pipes it is also possible

to increase the frequency of the insulating rings, or consider the adoption of reinforcedelements. These elements are designed with an increased wear thickness.However, in case of heavy duty applications, a more careful analysis and calculation isnecessary, taking into account the particular conditions on site.For these cases we recommend to ask for Raci technical support.

TABLE Erequired quantity of selfamalgamating tape (m)

1 m = 39,37 in2

4

68

10

12

16

20

24

30

32

36

40

42

48

CARRIER PIPEDN

ELEMENTS

C/D/I - S/T - A/B

requiredquantity (m)

requiredquantity (in)





F/G M/N - P/Q - E/H

1 m 1 m 1 m1,5 m

200 m

400 m Example


0,45

0,75

1,20,75

-

-

-

-

-

-

-

-

-

-

-

1,77

2,95

4,722,95

-

-

-

-

-

-

-

-

-

-

-

1,65

2,4

1,51,8

2,1

2,7

3,3

-

-

-

-

-

-

-

-

6,5

9,45

5,917,09

8,27

10,63

12,99

-

-

-

-

-

-

-

-

-

-

3,452,7

3,3

4,05

5,25

6,6

7,8

9,75

10,35

11,7

12,9

13,5

15,45

-

-

13,5810,63

12,99

15,94

20,67

25,98

30,71

38,39

40,75

46,06

50,79

53,15

60,83


11/24

RACI quality control


All Raci tests are carried out in our internal laboratory according to the UNI EN 527standard. For each production batch, we test 10 specimens which verify complianceto our standards. (see TABLE A).

When the mechanical characteristics are satisfied, we guarantee the productionof the specific batch by marking every elements with the corresponding batch

number. This allows to trace the story of each element.During the production phase, all pieces are tested according

to their projects drawing.Before packaging, visual inspection ensures that the overallquality reaches our standards.RACI quality dept. also provide sample-surveys by installing

a few elements on a pipe and checking them throughan ageing test which is carried out in the climatic chamber.

This test will last for 15 days. The temperature excursion rangewill be from -20 C to +80 C. After this test, samples will be

checked against creep or any other damage.



13

Instruction for assembly

Insert the male button-strap into the slot of the next pieces until you have assembled the required numberof elements to circle the pipe in order to create a belt of elements. Look at the table of elements (pg. 6-7).

1 2

OK

Wrap the spacer belt around the pipe and close theends by hand, inserting the male butt-strap into theslot to make a complete ring.

Start to fasten the ring around the pipe,using the clamp tight each element up to the endof third tooth.

3 4

OK

2



4

For the final clamping around the pipe tight gradually, in order to obtain as much as possible an omogeneousnumber of engaged teeth.

5

OK

6

OK

Do not use extension lever to increase the torque, you could break some components of the clamp.The clamp has been studied in order to guarantee the appropriate fastening only by using the original lever.

7

NO

5

S/T

C/D/I

F/G

M/N

E/H h 25-90

E/H h 130

* clamp type 5

can be used also for elemnts F/G

3

3

1

5*

2

4

ELEMENTS CLAMPS

EEE5

EEE5

EEE1

EEE7B

EEE4

EEE6

CODETABLE F

clamp types



Casing end seal

Casing end seal Espansit type Z

Epansit end seal type Z is entirely made of synthetic rubber (EPDM) and is the mostfunctional, simple and cheap solution for sealing the clearances between the casingand the carrier pipe at the end of the pipe.

End seal type Z have a tolerance of 10% on their O.D. values (both casingand carrier pipe). If this tolerance is not enough for the application

we recommend to choose a higher size, therefore increasing the pipe O.D.with wrappings of self-amalgamating P.I.B. tape.This type also guarantees good sealing for applications with eccentriccarrier pipe.

It is easily fixed onto the pipes by means of stainless steel straps.It is only suitable for NEW installations.

stainless steel straps ESPANSIT

end seal

carrier pipedouble spacerat each endcasing

Once the carrier pipe has been completely introduced inside the casing,two end seals are necessary.The different types of end seals which belong to our range guarantee a safe,clean and cost-effective solution for both new and pre-existing installation.Casing end seals are easy and fast to install.The material used is highly resistant to ageing and it offers excellent mechanicalstrength. There are four types of end seal:

Espansit end seal,

wave type Z

Conic end seal,

Espansit frustumtype C

Ekf type end seal Heat shrinkable

end seal



This kind of casing is available in almost every size, and the conical design

compensates for a possible eccentric position of the pipes.The end seals are made of CR-SBR black rubber.The Espansit type C is also available in the OPEN version.The end seal consists of a rubber sheet which can be folded around

the pipelines and then pasted on to the edges.

Casing end seal EKF type

Its easily adaptable shape allows the seal EKF type to be cut accordingto the carrier pipe diameter. This makes it suitable for a huge combinationof carrier and casing pipes. The casing frustum cone shaped end sealEKF type is made of a 3-4 mm thick high quality EPDM rubber.On the outer seal surface different sizes are marked to simplifythe cutting operation. The seal must be fixed to both pipeswith clamping straps which are applicable to all diametersand are included in the kit. Two casing pipe seats areprovided for each end seal EKF size. This solutionreduces the need to keep many different sizes on stock.

Heat shrinkable CSK end seal typeThe two fundamental data of heat shrinkable sleeves are their diameter before shrinkingand the smallest diameter they can reach after shrinking.The outside diameter of both the casing O.D. and of the carrier pipe O.D. must beincluded in the shrinking range of the heat shrinkable sleeve.Complete sealing is guaranteed in this way.The CSK end seal is made of an open band which has to be wrapped around the pipewith its own closing patch.

plastic support heatshrinkable sleeve

carrier pipedouble spacer

at each endcasing

Casing end seal Espansit type C



C

D

I

S

T

A

A

A

B

B

B

F

F

F

F

G

G

G

M

M

MM

M

M

N

N

N

N

N

E

E

E

E

EE

E

E

H

H

H

H

H

H

H

P

P

QQ

120

100

150

100

80

140

110

80

160

130

90

150

100

70

60

50

60

40

100

60

5540

30

25

100

70

50

35

30

50

26

26

18

1412

10

8

60

58

40

30

26

22

18

24

20

3026

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

40 x 30 x 35

40 x 30 x 35

40 x 30 x 35

60 x 40 x 50

60 x 40 x 50

60 x 40 x 5060 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 5060 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 50

60 x 40 x 5060 x 40 x 50

5

6

5

4

4

7

7

6

6

5

5

24

19

16

17

10

7

5

29

22

2318

17

17

22

18

15

12

12

30

20

22

17

1616

15

12

23

24

18

15

14

12

11

16

15

1312

4

5

4

3

3

6

6

5

5

4

4

22

17

14

15

9

6

4

27

20

2116

15

15

20

16

13

11

10

28

18

20

15

1414

13

10

21

22

16

13

12

10

9

14

13

1110

ELEMENTS TYPE SPACERS FOR CARTONCARTON DIMENSIONS

(cm)

15

15

15

20

20

19

36

50

19

36

50

25

41

60

75

25

41

60

18

36

4150

75

90

18

36

50

75

90

25

41

41

60

7590

110

130

25

41

60

75

90

110

130

110

120

110120

HEIGHT (mm)

CDC

CDD1

CDI1

CDS1

CDT

CDA19

CDA36

CDA50

CDB19

CDB36

CDB50

CDF25

CDF41

CDF60

CDF75

CDG25

CDG41

CDG60

CDM18

CDM36

CDM41CDM50

CDM75

CDM90

CDN18

CDN36

CDN50

CDN75

CDN90

CDE25

CDE41

CDE41R

CDE60

CDE75CDE90

CDE110

CDE130

CDH25

CDH41

CDH60

CDH75

CDH90

CDH110

CDH130

CDP110

CDP120

CDQ110CDQ120

CODE

How to order

In order to simplify stock management we only accept orders for complete boxes

GROSS NET

SPACERS

WEIGHT FOR CARTON (kg)



SIZE (inches)DIMENSIONS (mm)

A x B x H CODE TYPE

2X4

2X6

2X6

21/2X6

21/2X6

3X6

3X6

3X7

3X8

3X8

3X10

3X12

31/2X8

4X6

4X8

4X10

4X12

41/2X8

41/2X10

5X8

5X95X10

6X10

6X10

6X12

6X12

6X14

6X16

8X10

8X12

8X14

60x114x75

64x160x78

65x170x78

80x160x75

80x170x78

95x159x75

92x170x75

100x195x75

90x220x75

97x225x78

90x275x80

90x346x80

108x219x75

118x162x75

120x220x75

112x275x80

110x346x80

138x219x75

130x290x80

152x220x75

155x235x75145x275x78

159x273x75

173x273x75

159x324x80

175x330x75

168x365x80

160x406x80

225x280x75

200x324x75

230x355x75

EZ020X4

EZ020X6R

EZ020X6

EZ021X6R

EZ021X6

EZ030X6R

EZ030X6

EZ030X7

EZ030X8R

EZ030X8

EZ030X10

EZ030X12

EZ031X8

EZ040X6

EZ040X8

EZ040X10

EZ040X12

EZ041X8

EZ041X10

EZ050X8

EZ050X9EZ050X10

EZ060X10R

EZ060X10

EZ060X12R

EZ060X12

EZ060X14

EZ060X16

EZ080X10

EZ080X12

EZ080X14

1

1

1

1

1

1

1

2

1

1

2

3

2

1

1

2

3

1

2

1

12

1

1

2

1

2

3

1

1

1

SIZE (inches)DIMENSIONS (mm)

A x B x H CODE TYPE

8X16

8X18

9X12

10X12

10X14

10X14

10X16

10X16

10X20

10X22

12X16

12X18

12X20

12X22

14X18

14X20

16X20

16X22

16X24

20X24

20X2622X26

24X30

24X32

26X30

26X32

30X36

32X38

32X40

34X40

36X42

225x410x80

225x457x80

224x325x75

260x330x75

250x356x75

280x360x75

280x410x75

280x410x75

273x508x80

275x556x90

335x410x75

325x457x90

324x508x80

348x579x80

360x457x75

360x508x80

406x508x90

410x558x90

400x609x90

508x610x75

508x660x75558x660x90

615x760x90

600x812x90

668x760x75

660x813x157

765x915x150

813x965x157

825x1018x160

863x1015x160

914x1066x160

EZ080X16

EZ080X18

EZ090X12

EZ10X12

EZ10X14R

EZ10X14

EZ10X16

EZ10X16-2

EZ10X20

EZ10X22

EZ12X16

EZ12X18

EZ12X20

EZ12X22

EZ14X18

EZ14X20

EZ16X20

EZ16X22

EZ16X24

EZ20X24

EZ20X26EZ22X26

EZ24X30

EZ24X32

EZ26X30

EZ26X32

EZ30X36

EZ32X38

EZ32X40

EZ34X40

EZ36X42

2

2

1

1

1

1

1

2

3

3

1

1

2

2

1

1

1

1

2

1

21

1

2

1

1

1

1

1

1

1

A

B

H

A

B

H

A

H

B

Stainless steel straps included

TYPE 1 TYPE 2 TYPE 3

ESPANSIT END SEAL Type Z



SIZE(inches)

DIMENSIONS(mm)

CODE FORCLOSED TYPE

CODE FOROPENED TYPE

1x1,5

1x2

1x2,5

1x3

1x4

1x5

1x6

1x8

1,5x2

1,5x2,5

1,5x3

1,5x4

1,5x5

1,5x6

1,5x8

2x2,5

2x3

2x4

2x5

2x6

2x82x10

2x12

2x14

2x16

2,5x3

2,5x4

2,5x5

2,5x6

2,5x8

2,5x10

2,5x12

2,5x14

2,5x163x4

3x5

3x6

3x8

3x10

3x12

3x14

3x16

3x18

3x20

3x22

3x24

3x264x5

4x6

4x8

32x53x220

32x66x220

32x84x240

32x98x250

32x126x270

32x154x290

32x185x310

32x241x350

46x66x210

46x84x230

46x98x240

46x126x260

46x154x280

46x185x300

46x241x340

57x84x220

57x98x230

57x126x250

57x154x270

57x185x290

57x241x33057x300x370

57x356x410

57x391x430

57x447x470

72x98x220

72x126x240

72x154x260

72x185x280

72x241x320

72x300x360

72x356x400

72x391x420

72x447x46084x126x230

84x154x250

84x185x270

84x241x310

84x300x350

84x356x390

84x391x420

84x447x450

84x503x490

84x559x530

84x615x570

84x671x610

84x726x650109x154x230

109x185x250

109x241x290

E010X011CC

E010X020CC

E010X021CC

E010X3CC

E010X4CC

E010X5CC

E010X6CC

E010X8CC

E011X020CC

E011X021CC

E011X3CC

E011X4CC

E011X5CC

E011X6CC

E011X8CC

E020X021CC

E020X3CC

E020X4CC

E020X5CC

E020X6CC

E020X8CCE020X10CC

E020X12CC

E020X14CC

E020X16CC

E021X3CC

E021X4CC

E021X5CC

E021X6CC

E021X8CC

E021X10CC

E021X12CC

E021X14CC

E021X16CCE030X4CC

E030X5CC

E030X6CC

E030X8CC

E030X10CC

E030X12CC

E030X14CC

E030X16CC

E030X18CC

E030X20CC

E030X22CC

E030X24CC

E030X26CCE040X5CC

E040X6CC

E040X8CC

E010X011CO

E010X020CO

E010X021CO

E010X3CO

E010X4CO

E010X5CO

E010X6CO

E010X8CO

E011X020CO

E011X021CO

E011X3CO

E011X4CO

E011X5CO

E011X6CO

E011X8CO

E020X021CO

E020X3CO

E020X4CO

E020X5CO

E020X6CO

E020X8COE020X10CO

E020X12CO

E020X14CO

E020X16CO

E021X3CO

E021X4CO

E021X5CO

E021X6CO

E021X8CO

E021X10CO

E021X12CO

E021X14CO

E021X16COE030X4CO

E030X5CO

E030X6CO

E030X8CO

E030X10CO

E030X12CO

E030X14CO

E030X16CO

E030X18CO

E030X20CO

E030X22CO

E030X24CO

E030X26COE040X5CO

E040X6CO

E040X8CO

SIZE(inches)

DIMENSIONS(mm)

CODE FORCLOSED TYPE

CODE FOROPENED TYPE

4x10

4x12

4x14

4x16

4x18

4x20

4x22

4x24

4x26

5x6

5x8

5x10

5x12

5x14

5x16

5x18

5x20

5x22

5x24

5x26

6x86x10

6x12

6x14

6x16

6x18

6x20

6x22

6x24

6x26

6x28

8x10

8x12

8x148x16

8x18

8x20

8x22

8x24

8x26

8x28

8x30

8x32

10x12

10x14

10x16

10x1810x20

10x22

10x24

109x300x330

109x356x370

109x391x400

109x447x440

109x503x480

109x559x520

109x615x550

109x671x600

109x726x630

133x185x240

133x241x280

133x300x320

133x356x360

133x391x380

133x447x420

133x503x460

133x559x500

133x615x540

133x671x580

133x726x620

160x241x260160x300x300

160x356x340

160x391x360

160x447x400

160x503x440

160x559x480

160x615x520

160x671x560

160x726x600

160x782x640

208x300x270

208x356x300

208x391x330208x447x370

208x503x410

208x559x450

208x615x490

208x671x520

208x726x560

208x782x600

208x838x640

208x894x680

259x356x270

259x391x290

259x447x330

259x503x370259x559x410

259x615x450

259x671x490

E040X10CC

E040X12CC

E040X14CC

E040X16CC

E040X18CC

E040X20CC

E040X22CC

E040X24CC

E040X26CC

E050X6CC

E050X8CC

E050X10CC

E050X12CC

E050X14CC

E050X16CC

E050X18CC

E050X20CC

E050X22CC

E050X24CC

E050X26CC

E060X8CCE060X10CC

E060X12CC

E060X14CC

E060X16CC

E060X18CC

E060X20CC

E060X22CC

E050X24CC

E060X26CC

E060X28CC

E080X10CC

E080X12CC

E080X14CCE080X16CC

E080X18CC

E080X20CC

E080X22CC

E080X24CC

E080X26CC

E080X28CC

E080X30CC

E080X32CC

E10X12CC

E10X14CC

E10X16CC

E10X18CCE10X20CC

E10X22CC

E10X24CC

E040X10CO

E040X12CO

E040X14CO

E040X16CO

E040X18CO

E040X20CO

E040X22CO

E040X24CO

E040X26CO

E050X6CO

E050X8CO

E050X10CO

E050X12CO

E050X14CO

E050X16CO

E050X18CO

E050X20CO

E050X22CO

E050X24CO

E050X26CO

E060X8COE060X10CO

E060X12CO

E060X14CO

E060X16CO

E060X18CO

E060X20CO

E060X22CO

E050X24CO

E060X26CO

E060X28CO

E080X10CO

E080X12CO

E080X14COE080X16CO

E080X18CO

E080X20CO

E080X22CO

E080X24CO

E080X26CO

E080X28CO

E080X30CO

E080X32CO

E10X12CO

E10X14CO

E10X16CO

E10X18COE10X20CO

E10X22CO

E10X24CO

ESPANSIT FRUSTUM END SEAL Type C

CO = open version CC = close version Stainless steel straps included



SIZE(inches)

DIMENSIONS(mm)

CODE FORCLOSED TYPE

CODE FOROPENED TYPE

10x26

10x28

10x30

10x32

10x34

10x36

12x14

12x16

12x18

12x20

12x22

12x24

12x26

12x28

12x30

12x32

12x34

12x36

12x38

12x40

14x1614x18

14x20

14x22

14x24

14x26

14x28

14x30

14x32

14x34

14x36

14x38

14x40

16x1816x20

16x22

16x24

16x26

16x28

16x32

16x30

16x34

16x36

16x38

16x40

18x20

18x2218x24

18x26

18x28

259x726x530

259x782x570

259x838x610

259x894x640

259x950x680

259x1005x720

308x391x260

308x447x280

308x503x340

308x559x380

308x615x420

308x671x450

308x726x490

308x782x530

308x838x570

308x894x610

308x950x650

308x1005x690

308x1062x730

308x1118x770

338x447x280338x503x320

338x559x360

338x615x390

338x671x430

338x726x470

338x782x510

338x838x550

338x894x590

338x950x630

338x1005x670

338x1062x710

338x1118x750

386x503x280386x559x320

386x615x360

386x671x400

386x726x440

386x782x480

386x894x560

386x838x520

386x952x600

386x1005x630

386x1062x670

386x1118x710

434x559x290

434x615x330434x671x370

434x726x400

434x782x440

E10X26CC

E10X28CC

E10X30CC

E10X32CC

E10X34CC

E10X36CC

E12X14CC

E12X16CC

E12X18CC

E12X20CC

E12X22CC

E12X24CC

E12X26CC

E12X28CC

E12X30CC

E12X32CC

E12X34CC

E12X36CC

E12X38CC

E12X40CC

E14X16CCE14X18CC

E14X20CC

E14X22CC

E14X24CC

E14X26CC

E14X28CC

E14X30CC

E14X32CC

E14X34CC

E14X36CC

E14X38CC

E14X40CC

E16X18CCE16X20CC

E16X22CC

E16X24CC

E16X26CC

E16X28CC

E16X32CC

E16X30CC

E16X34CC

E16X36CC

E16X38CC

E16X40CC

E18X20CC

E18X22CCE18X24CC

E18X26CC

E18X28CC

E10X26CO

E10X28CO

E10X30CO

E10X32CO

E10X34CO

E10X36CO

E12X14CO

E12X16CO

E12X18CO

E12X20CO

E12X22CO

E12X24CO

E12X26CO

E12X28CO

E12X30CO

E12X32CO

E12X34CO

E12X36CO

E12X38CO

E12X40CO

E14X16COE14X18CO

E14X20CO

E14X22CO

E14X24CO

E14X26CO

E14X28CO

E14X30CO

E14X32CO

E14X34CO

E14X36CO

E14X38CO

E14X40CO

E16X18COE16X20CO

E16X22CO

E16X24CO

E16X26CO

E16X28CO

E16X32CO

E16X30CO

E16X34CO

E16X36CO

E16X38CO

E16X40CO

E18X20CO

E18X22COE18X24CO

E18X26CO

E18X28CO

SIZE(inches)

DIMENSIONS(mm)

CODE FORCLOSED TYPE

CODE FOROPENED TYPE

18x30

18x32

18x34

18x36

18x38

18x40

20x22

20x24

20x26

20x28

20x30

20x32

20x34

20x36

20x38

20x40

22x24

22x26

22x28

22x30

22x3222x34

22x36

22x38

22x40

22x42

22x44

24x26

24x28

24x30

24x32

24x34

24x36

24x3824x40

24x42

24x44

26x28

26x30

26x32

26x34

26x36

26x38

26x40

26x42

26x44

28x3028x32

28x34

28x36

434x838x480

434x894x520

434x950x560

434x1005x600

434x1062x640

434x1118x680

483x615x290

483x671x330

483x726x370

483x782x410

483x838x450

483x894x490

483x950x530

483x1005x570

483x1062x610

483x1118x650

531x671x300

531x726x340

531x782x380

531x838x420

531x894x450531x950x490

531x1005x530

531x1062x570

531x1118x610

531x1174x650

531x1230x690

580x726x300

580x782x340

580x838x380

580x894x420

580x950x460

580x1005x500

580x1062x540580x1118x580

580x1174x620

580x1230x660

627x782x310

627x838x350

627x894x390

627x950x430

627x1005x470

627x1062x500

627x1118x540

627x1174x580

627x1230x620

675x838x310675x894x350

675x950x390

675x1005x430

E18X30CC

E18X32CC

E18X34CC

E18X36CC

E18X38CC

E18X40CC

E20X22CC

E20X24CC

E20X26CC

E20X28CC

E20X30CC

E20X32CC

E20X34CC

E20X36CC

E20X38CC

E20X40CC

E22X24CC

E22X26CC

E22X28CC

E22X30CC

E22X32CCE22X34CC

E22X36CC

E22X38CC

E22X40CC

E22X42CC

E22X44CC

E24X26CC

E24X28CC

E24X30CC

E24X32CC

E24X34CC

E24X36CC

E24X38CCE24X40CC

E24X42CC

E24X44CC

E26X28CC

E26X30CC

E26X32CC

E26X34CC

E26X36CC

E26X38CC

E26X40CC

E26X42CC

E26X44CC

E28X30CCE28X32CC

E28X34CC

E28X36CC

E18X30CO

E18X32CO

E18X34CO

E18X36CO

E18X38CO

E18X40CO

E20X22CO

E20X24CO

E20X26CO

E20X28CO

E20X30CO

E20X32CO

E20X34CO

E20X36CO

E20X38CO

E20X40CO

E22X24CO

E22X26CO

E22X28CO

E22X30CO

E22X32COE22X34CO

E22X36CO

E22X38CO

E22X40CO

E22X42CO

E22X44CO

E24X26CO

E24X28CO

E24X30CO

E24X32CO

E24X34CO

E24X36CO

E24X38COE24X40CO

E24X42CO

E24X44CO

E26X28CO

E26X30CO

E26X32CO

E26X34CO

E26X36CO

E26X38CO

E26X40CO

E26X42CO

E26X44CO

E28X30COE28X32CO

E28X34CO

E28X36CO





SIZE(inches)

DIMENSIONS(mm)

CODE FORCLOSED TYPE

CODE FOROPENED TYPE

28x38

28x40

28x42

28x44

28x46

28x48

30x32

30x34

30x36

30x38

30x40

30x42

30x44

30x46

30x48

30x52

30x56

32x34

32x36

32x38

32x4032x42

32x44

32x46

32x48

32x52

32x56

34x36

34x38

34x40

34x42

34x44

34x46

34x4834x52

34x56

36x38

36x40

36x42

36x44

36x46

36x48

36x52

36x56

36x60

38x40

38x4238x44

38x46

675x1062x470

675x1118x510

675x1174x550

675x1230x590

675x1285x630

675x1342x670

724x894x320

724x950x360

724x1005x400

724x1062x440

724x1118x480

724x1174x520

724x1230x550

724x1285x590

724x1342x630

724x1453x710

724x1562x790

772x950x330

772x1005x360

772x1062x400

772x1118x440772x1174x480

772x1230x520

772x1285x560

772x1342x600

772x1453x680

772x1562x750

821x1005x330

821x1062x370

821x1118x410

821x1174x450

821x1230x490

821x1285x530

821x1342x570821x1453x640

821x1562x720

868x1062x340

868x1118x380

868x1174x410

868x1230x450

868x1285x490

868x1342x530

868x1453x610

868x1562x690

868x1676x770

917x1118x340

917x1174x380917x1230x420

917x1285x460

E28X38CC

E28X40CC

E28X42CC

E28X44CC

E28X46CC

E28X48CC

E30X32CC

E30X34CC

E30X36CC

E30X38CC

E30X40CC

E30X42CC

E30X44CC

E30X46CC

E30X48CC

E30X52CC

E30X56CC

E32X34CC

E32X36CC

E32X38CC

E32X40CCE32X42CC

E32X44CC

E32X46CC

E32X48CC

E32X52CC

E32X56CC

E34X36CC

E34X38CC

E34X40CC

E34X42CC

E34X44CC

E34X46CC

E34X48CCE34X52CC

E34X56CC

E36X38CC

E36X40CC

E36X42CC

E36X44CC

E36X46CC

E36X48CC

E36X52CC

E36X56CC

E36X60CC

E38X40CC

E38X42CCE38X44CC

E38X46CC

E28X38CO

E28X40CO

E28X42CO

E28X44CO

E28X46CO

E28X48CO

E30X32CO

E30X34CO

E30X36CO

E30X38CO

E30X40CO

E30X42CO

E30X44CO

E30X46CO

E30X48CO

E30X52CO

E30X56CO

E32X34CO

E32X36CO

E32X38CO

E32X40COE32X42CO

E32X44CO

E32X46CO

E32X48CO

E32X52CO

E32X56CO

E34X36CO

E34X38CO

E34X40CO

E34X42CO

E34X44CO

E34X46CO

E34X48COE34X52CO

E34X56CO

E36X38CO

E36X40CO

E36X42CO

E36X44CO

E36X46CO

E36X48CO

E36X52CO

E36X56CO

E36X60CO

E38X40CO

E38X42COE38X44CO

E38X46CO

SIZE(inches)

DIMENSIONS(mm)

CODE FORCLOSED TYPE

CODE FOROPENED TYPE

38x48

38x52

38x56

38x60

40x42

40x44

40x46

40x48

40x52

40x56

40x60

40x64

42x44

42x46

42x48

42x52

42x56

42x60

42x64

44x46

44x4844x52

44x56

44x60

44x64

46x48

46x52

46x56

46x60

46x64

46x68

46x72

46x76

46x8048x52

48x56

48x60

48x64

48x68

48x72

48x76

48x80

52x56

52x60

52x64

52x68

52x7252x76

52x80

917x1342x500

917x1453x580

917x1562x650

917x1676x730

965x1174x350

965x1230x390

965x1285x420

965x1342x460

965x1453x540

965x1562x620

965x1676x700

965x1782x770

1014x1230x350

1014x1285x390

1014x1342x430

1014x1453x510

1014x1562x580

1014x1676x660

1014x1782x740

1062x1285x360

1062x1342x4001062x1453x470

1062x1562x550

1062x1676x630

1062x1785x700

1110x1342x360

1110x1453x440

1110x1562x520

1110x1676x600

1110x1782x670

1110x1900x750

1110x2002x830

1110x2123x910

1110x2222x9801159x1453x410

1159x1562x480

1159x1676x560

1159x1782x640

1159x1900x720

1159x2002x790

1159x2123x880

1159x2222x940

1255x1562x420

1255x1676x500

1255x1782x570

1255x1900x650

1255x2002x7201255x2123x810

1255x2222x880

E38X48CC

E38X52CC

E38X56CC

E38X60CC

E40X42CC

E40X44CC

E40X46CC

E40X48CC

E40X52CC

E40X56CC

E40X60CC

E40X64CC

E42X44CC

E42X46CC

E42X48CC

E42X52CC

E42X56CC

E42X60CC

E42X64CC

E44X46CC

E44X48CCE44X52CC

E44X56CC

E44X60CC

E44X64CC

E46X48CC

E46X52CC

E46X56CC

E46X60CC

E46X64CC

E46X68CC

E46X72CC

E46X76CC

E46X80CCE48X52CC

E48X56CC

E48X60CC

E48X64CC

E48X68CC

E48X72CC

E48X76CC

E48X80CC

E52X56CC

E52X60CC

E52X64CC

E52X68CC

E52X72CCE52X76CC

E52X80CC

E38X48CO

E38X52CO

E38X56CO

E38X60CO

E40X42CO

E40X44CO

E40X46CO

E40X48CO

E40X52CO

E40X56CO

E40X60CO

E40X64CO

E42X44CO

E42X46CO

E42X48CO

E42X52CO

E42X56CO

E42X60CO

E42X64CO

E44X46CO

E44X48COE44X52CO

E44X56CO

E44X60CO

E44X64CO

E46X48CO

E46X52CO

E46X56CO

E46X60CO

E46X64CO

E46X68CO

E46X72CO

E46X76CO

E46X80COE48X52CO

E48X56CO

E48X60CO

E48X64CO

E48X68CO

E48X72CO

E48X76CO

E48X80CO

E52X56CO

E52X60CO

E52X64CO

E52X68CO

E52X72COE52X76CO

E52X80CO





0-4/5

0-6/8

2-10/12

3-14/16

6-20/24

0-100/125

0-150/200

50-250/300

80-350/400

150-500/600

10x110/135

10x165/215

60x270/320

90x350/402

150x508/610

DIMENSION (mm)C x B / A

EKF000X05

EKF000X08

EKF020X12

EKF021X16

EKF060X24

CODE

END SEAL Type EKF

3x5

4x6

5x8

6x10

8x12

10x16

10x18

12x20

12x22

14x24

14x26

16x28

16x30

18x32

20x36

24x40

26x42

30x48

SIZE (inches)

650

650

650

650

650

650

650

650

650

650

650

650

650

900

900

900

900

900

HEIGHT (mm)

TCCSK65K05

TCCSK65K06

TCCSK65K08

TCCSK65K10

TCCSK65K12

TCCSK65K16

TCCSK65K18

TCCSK65K20

TCCSK65K22

TCCSK65K24

TCCSK65K26

TCCSK65K28

TCCSK65K30

TCCSK90K32

TCCSK90K36

TCCSK90K40

TCCSK90K42

TCCSK90K48

CODE

HEATSHRINKABLE END SEAL Type CSK

Customized versions are available on request

(inches) (mm)SIZE

Stainless steel straps included



One of the mayor crossingrealized with raci spacers:

Carrier 3200 mm SteelCasing 4000 mm Steel

Cooling water pipelineCarrier pipe 1800 mmCasing pipe 2000 mm

E elements CDE41RCrossing length: 380 m



WarrantyAll products are warranted against failure caused by manufacturing defects for aperiod of one year. Any product found to be so defective and returned within oneyear from date of shipment will be replaced without charge. The above warranty ismade in lieu of, and we disclaim, any and all other warranties, expressed orimplied, including the warranties of merchantability and fitness for a particularpurpose, and buyer agrees to accept the products without any such warranties.We hereby disclaim any obligation or liability for consequential damages, labor

costs or any other claims or liabilities of any kind whatsoever.

iso 9001 certif. n 0364/2


24/24

S12

-Eng.2

005.R

EV2

Coliere RACI

Documents

Transcript of Coliere RACI