Cobra Xrs933o
-
Upload
sandu-palantin -
Category
Documents
-
view
222 -
download
0
Transcript of Cobra Xrs933o
-
8/8/2019 Cobra Xrs933o
1/15
XRS9330
12 BAND
HIGH-PERFORMANCE
DIGITAL RADAR/LASERDETECTOR WITH XTREME RANGESUPERHETERODYNE TECHNOLOGY
Nothing Comes Close to a Cobra Engl
Operating Instructio
PrintedinPartNo.480-
Ver
Nothing Comes Close to a Cobra English
For more information or toorder any of our products,
please visit our website:
www.cobra.com
CB Radios
microTALK Radios
Radar/Laser Detectors
Safety Alert Traffic Warning Systems
Handheld GPS Receivers
Mobile GPS Navigation Systems
HighGearAccessories
CobraMarineTMVHF Marine Radios
CobraMarineTM Power Inverters
Accessories
The Cobra line of quality products includes:
-
8/8/2019 Cobra Xrs933o
2/15
Display and Product Featuresn r r i n r
i nrr n
i
n r n
Introduction
Nothing Comes Close to a Cobr
Xtreme RangeSuperheterodyne TechnologyWith super-fast sweep circuitry,XRS provides extra detection rangeand the best possible advance warningto even the fastest radar guns
Detection and Separate Alerts For:Radar signals (X, K, Ka and Ku bands,with signal strength indicated),laser signals, Safety Alert signals,Strobe Alert signals, VG-2 signals,Spectre 1 signals
LaserEyeFor 360 detection of laser andstrobe signals
Instant-On Ready
Detects radar guns with instant-on(very fast) speed monitoring capabilities
Tone AlertsWith adjustable volume
UltraBright Data DisplayEasy-to-read with adjustable brightness
City or HighwayModes to reduce false alerts
Safety AlertTraffic warning system distinguishesimportant safety alerts from otherK band signals
Strobe AlertEmergency vehicle warning system
Manual Mute or Auto MuteA mute function of audio alerts
IntelliMuteA mute function whichautomatically reduces false
alerts by sensing engine RPMsMountingMounts easily on windshieldor dashboard
Product Features
Congratulations! Youve made a smart choice by purchasing a highperformance radar/laser detector from Cobra. Just look at some of thesophisticated features and capabilities your new unit includes:
Display
This booklet describes the simple steps for mounting and setting up your detector.It also provides helpful information about how radar and laser guns are used andhow you can interpret the alerts you receive.
Controls, Indicatorsand Connections
n r r i n ri n
rr n
i
n r n
Introduction
A2 English
Controls, Indicators and Connections
12V DCPower Jack
On-Off/ Volume Control
Allows you to adjust thevolume of the tone alerts.
Audio Jack
City Button
For City or Highwaymodes to reducefalse alerts.
LaserEye
For 360 detection oflaser and strobe signals.
Windshield BracketRelease Button
Speaker
* Press and hold for two secondsto access these functions.
WindshieldBracket Mount
n r r i n ri n
rr n
i
i n I n
n r y I n
WARNING
Modifications or parts substitutions not approved
by Cobra Electronics Corporation may violate
FCC Rules and void your authority to operate
this equipment.
IntelliMuteIndicator
Radar, VG-2,Spectre 1,Safety and
Strobe Indicators
XKKaV S c
X K Ka VS c
XKKaV S cXK Ka V S L i
n r n
NOTE: In This ManualWhen steady,the display willbe shown:
When blinking,the display willbe shown:
X & K will lightsimultaneouslywhen indicatingKu detection:
SignalStrength,
Laser andCity/Highway
Mode Indicators
Signal Strength1 (weakest) to 5 (strongest)
Dim Button
Allows you to adjust the UltraBrightData Display brightness for easy
reading. (Also turns VG-2 andSpectre 1 alerts on and off.*)
IntelliMute Button
Engine RPM sensing mute functionwhich reduces false alerts. Buttonturns IntelliMute on and off. (Alsoenters IntelliMute setting mode.*)
Mute Button
For manual mute orauto mute of audio alerts.(Also turns Voice Alerton and off.*)
-
8/8/2019 Cobra Xrs933o
3/15
Nothing Comes Close to a Cobra 1
Contentsn r r i n r
i nrr n
i
n r n
Introduction
n r r i n ri n
rr n
i
in n
n r n
Introduction
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1Customer Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1Controls, Indicators and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Your Detector
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Highway/City Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6UltraBright Data Display Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Muting an Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Auto Mute Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8IntelliMute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9VG-2 and Spectre 1 Alert Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . 12K Band and Ku Band Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Signals Detected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Audio Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Visual Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Instant-On Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Responding to Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Understanding Radar and Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Warranty
L imi te d 1 -Ye ar Wa rra nty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1
Customer Assistance
Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Trademark Acknowledgement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Order Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
n r r i n ri n
rr n
i
in n
n r n
r
i n
rr n
r i n ri n
rr n
-
8/8/2019 Cobra Xrs933o
4/15
Nothing Comes Close to a Cobr
Installationn r r i n r
i nrr n
i
n r n
Your DetectorInstallation
n r r i n ri n
rr n
i
n r n
Your Detector
English2
Installation
Where to Mount Your UnitYou will get optimum performance from your detector if you Mount it at apoint approximately in the center of the vehicle, as low as possible on thefront windshield without obstructing the units view of the road either tothe front or rear. Make sure unit is level with the road. You can also mount itdirectly on the dashboard.
The units lens must not be blocked and the LaserEye should have a clear viewout the back window to allow 360 detection.
Radar and laser signals pass through glass but not through other materialsand objects. Objects that can block or weaken incoming signals include:
s Windshield wiper blades
s Mirrored sun screens
s Dark tinting at the top of the windshield
s Heated windshields currently available on some vehicles(Instaclear for Ford, Electriclear for GM.) Consult your dealerto see if you have this option.
1. Attach the rubbercups to the bracket.
2. Make sure the rubber cups and your windshield are clean.
3. Push the bracket firmlyonto the windshield.
4. Attach the detector tothe bracket. Check theangle of the unit.
5. To adjust the angle ifnecessary, gently push orpull on the bracket to bendit. DO NOT use the detectorto bend the bracket.
6. Plug the power cordinto the detector.
7. Plug the cigarette lighteradapter on the powercord into your vehiclescigarette lighter.
8. You can temporarily remove the detector whenever youwish by pressing the bracket release button and s lidingit off the bracket.
Windshield Mounting
The LaserEye Should Have a Clear View
Windshi el d Mount ing Dashboard Mount ing
-
8/8/2019 Cobra Xrs933o
5/15
To Turn On the Unit and Adjust the Audio VolumeRotate the On-Off/Volume controlclockwise (awayfrom you).
Tone Visual Display
Three beeps h appears in the displayindicating that the poweris on.
Getting Started
Getting Startedn r r i n r
i nrr n
i
n r n
Your Detector
Nothing Comes Close to a Cobr
Installationn r r i n r
i nrr n
i
n r n
Your Detector
English4
1. Place the detector on the dashboard to find a locationwhere the unit has a clear, level view of the road.The angle can NOT be a djusted after mounting.
2. Remove the paper backingfrom one side of the hook-and-loop fastener.
3. Attach the pad to thedashboard at your chosenlocation and remove the
other paper backing.
4. Attach the detector to thehook-and-loop fastener.You can remove andreattach the unit asoften as you like.
6. Plug the power cordinto the detector.
7. Plug the cigarette lighteradapter on the powercord into your vehicles
cigarette lighter.
Dashboard Mounting
Power On
XK Ka V S h
On-Off/ Volume ControlRotate clockwise(away from you)
NOTEIn some vehicles, power is supplied to the cigarette lighteeven while the ignition is off. If this is the case with yourvehicle, you should turn offor unplug your detector whenparking for lengthy periods.
n r r i n ri n
rr n
i
i n I n
n r y I n
tr
rat
ust
rss
sta
arra
ty
t
a
s
ary
s
aut
ar
staat
ust
rss
sta
-
8/8/2019 Cobra Xrs933o
6/15
Settingsn r r i n r
i nrr n
i
n r n
Your Detector
Nothing Comes Close to a Cobr
UltraBright Data Display BrightnessYou can choose from three settings for Brightness of the display.You can cycle through the settings by repeatedly pushing the Dim button.The factory setting is Bright.
Settingsn r r i n r
i nrr n
i
n r n
Your Detector
English
Settings
When changing the Settings on your detector, please keep in mind:
s Buttons can have multiple functions.
s All settings will be stored in memory when the power isturned off and recalled when the power is turned back on.
Highway/City ModeSetting your detector to City mode delays all X band audio alerts untilthe signal strength reaches Level 3. (A single beep will sound when thesignal is first detected.) This will reduce false alerts while you are drivingin, or near, urban areas where there are many sources for conflictingX band signals such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicateswhat you will see and hear as you complete each step. The factory settingis Highway mode.
6
Dim ButtonPress and release
Bright
Dark
Dim
Press andrelease Dimbutton
City ButtonPress and
release
City Mode
XK Ka V S c
Highway Mode
XK Ka V S h
To Change From Highway Mode to City Mode
Press and releasethe City button.
Tone Visual Display
One beep c appears in the display
To Change From City Mode Back to Highway Mode
Press and releasethe City button again.
Tone Visual Display
Two beeps h appears in the display
To Change the Brightness to Dim
Press and releasethe Dim buttononce.
Tone Visual Display
One beep Display dims
To Change the Brightness to Dark
Press and releasethe Dim buttonagain.
Tone Visual Display
One beep Display remains dim(no visual alerts will be seen)
To Change the Brightness to Bright
Press and releasethe Dim button athird time.
Tone Visual Display
Two beeps Display returns
to full brightness
-
8/8/2019 Cobra Xrs933o
7/15
Settingsn r r i n r
i nrr n
i
n r n
Your Detector
Nothing Comes Close to a Cobr
Settingsn r r i n r
i nrr n
i
n r n
Your Detector
English
Muting an AlertYour detector allows you to quickly turn off an audio Alert by momentarilypressing the Mute button. If you press the Mute button a second timeduring the Alert, the audio Alert will be turned back on.
Auto Mute ModeAuto Mute will automatically reduce the audio volume of all alertsafter four seconds for as long as the signal is detected. The factorysetting for Auto Mute is on.
8
IntelliMuteIntelliMute is a unique new feature that allows you to avoid alerts youdont need to hear because you are stopped or moving slowly. By sensingthe revs (RPMs) of your engine, IntelliMute knows when you are at lowspeed and automatically mutes alerts (except for strobe signals fromemergency vehicles).
Before IntelliMute will work, you must set an activation point for your enginerevs (see page 11). Whenever the revs are below that point, IntelliMute willbegin muting. The activation point will be stored in memory and recalledeach time the power is turned on. The factory setting is IntelliMute off.
NOTEIntelliMute may not work with some vehicles because it cannot sense
the engines revs. In such cases, you can reduce unwanted audio alertsby using Auto Mute and City mode when appropriate.
n r r i n r
i n
rr n
i
i n I n
n r y I n
IntelliMute On
XK Ka V S c
Mute ButtonPress and release
ToTurn Auto Mute Off
Press and releasethe Mute buttonwhile no alertis occurring.
Tone Visual Display
One beep None
To Turn Auto Mute On
Press and releasethe Mute buttonagain while no
alert is occurring.
Tone Visual Display
Two beeps None
To Turn IntelliMute On
Press and releasethe IntelliMutebutton.
Tone Visual Display
Two beeps Dot appears next to the largecharacter on the right
To Turn IntelliMute Off
Press and releasethe IntelliMutebutton again.
Tone Visual Display
One beep None
IntelliMute ButtonPress and release
-
8/8/2019 Cobra Xrs933o
8/15
r i n r
i n
rr n
i i n rnin
n l l i nr
i n
Settingsn r r i n r
i nrr n
i
n r n
Your Detector
Nothing Comes Close to a Cobr
Settingsn r r i n r
i nrr n
i
n r n
Your Detector
English
What to Remember While Using IntelliMute
IntelliMute works with both City and Auto Mute modes.
Whenever your engine revs are below the activation point,the dot next to the large character on the right side of the displaywill remain lit. Above the activation point, the dot will blink twiceevery two seconds.
If, for any reason, the unit stops sensing your engines revs,IntelliMute will indicate an error and automatically turn off.
The rev point you set will be stored in the units memory whenpower is turned off and recalled each time the power is turned on.
NOTEThe rev point must be reset if you use your detector in a different vehicle.
NOTEWhen initially choosing your IntelliMute activation point, a settingof approximately 300 to 600 RPMs above idle is recommended.You can reset the activation point at any time to fit your individualpreferences and driving style.
Setting the IntelliMute Activation Point
Your detector must be installed in your vehicle.
CAUTION
Do not attempt to set the rev point while driving.Your vehicle should be parked and idling.
IntelliMute must be turned on before setting the activation point.You will hear a series of beeps as you follow the steps on page 11.
10
IntelliMute ButtonPress and hold for
two seconds
Below Activation Point
X K Ka V S c
Above Activation Point
X K K a V S c
To Set the IntelliMute Activation Point
Press and holdthe IntelliMutebutton for twoseconds.
Tone Visual Display
Two beeps None
Rev your engine tothe level you wishto set (recommendslightly above idle)
and hold revs steadyfor two seconds.
None Three bars willflash in succession
At the desiredrev level, pressand release theIntelliMutebutton.
Three beeps All three bars flashthree times
Tone Visual Display
Four beeps E appears
XK Ka V S E
1 2 3
1 2 3
I n tr o p e ra t io n C u st o e rAssistance
arranty
Notice
ainIcons
econdary Icons
C a ut i on a r ni n g
InstallationCusto erAssistance
I n tr o p e ra t io n
Notice
ainIcons
econdaryIcons
Installation
I n tr o p e ra t io n C u st o e rAssistance
arranty
Notice
ainIcons
econdary Icons
C a ut i on a r ni n g
InstallationCusto erAssistance
I n tr o p e ra t io n
Notice
ainIcons
econdary Icons
Installation
n r r i n r
i n
rr n
i
nI n
n r y I n
n r r i n ri n
rr n
i
nI n
n r y I n
NOTEIf the unit is unable to sense usable pulses within threeseconds or if you do not set a rev point within 20 secondsof beginning these steps , IntelliMute will indicate an errorand automatically turn off.
n r r i n ri n
rr n
i
i n I n
n r y I n
-
8/8/2019 Cobra Xrs933o
9/15
Dim ButtonPress and holdfor two seconds
Detectionn r r i n r
i nrr n
i
n r n
Your Detector
Nothing Comes Close to a Cobr
Detection
Signals DetectedThe tables on the following pages show you the types of Signals yourdetector will detect, as well as the visual alerts it provides for each of them.
Audio AlertsA distinctly different Alert tone is used for each type of signal detected(including separate tones for each laser signal). For X, K, Ka and Ku bandradar signals, the tones will repeat faster as you approach the signalsource. The repeat rate of the tones gives you useful information aboutthe signal detected. (See responding to alerts on page 16.)
Visual DisplayAn indication of the type of signal detected will appear in the UltraBrightdata Display. During X, K, Ka and Ku alerts, a number will also appear,indicating the strength of the signal detected. (1 = weakest, 5 = strongest)
During laser alerts the letter L will appear, instead of the signal strength indicatio
During VG-2 or Spectre 1 alerts, the letter V will appear. It will be steadyduring VG-2 and blink during Spectre 1.
During Safety Alert and Strobe Alert the letter S will appear. It will besteady during a Safety Alert and will blink during a Strobe Alert.
Settingsn r r i n r
i nrr n
i
n r n
Your Detector
English
VG-2 and Spectre 1 Alert Audio SettingsThe detector is undetectable by police VG-2 and Spectre 1 radar detectordetectors and will alert you when such a device is in use near your vehicle.During the alert, the unit continues to detect other signals. You can choosewhether or not you want your unit to show VG-2 and Spectre 1 alerts.The factory setting is VG-2 and Spectre 1 alert off.
K Band and Ku Band Detection
12
On/Off Indicator
XK K aV S c
X Signal Detected
X KKa V S 2 X K Ka V S 3 X K KaV S 5 X K Ka V S 4
Laser Signal Detected
XK Ka V S L
VG-2 Alert Signal Detected
XK K aV S c
KSignal Detected Ka S ignal Detected Ku S ignal Detecte
Safety Alert Signal Detected
XK Ka V S c
Strobe Alert Signal Detected
XK Ka V S c
Spectre 1 Alert Signal Detected
XK K aV S c
To Turn VG-2 and Spectre 1 Alerts On
While no signal isbeing detected,press and holdthe Dim buttonfor two secondsagain.
Tone Visual Display
Two beeps V will blink twicein the display
ToTurn K Band On and Off
While no signal isbeing detected,press and hold boththe Dim and Citybuttons for twoseconds.
Tone Visual Display
K On = Two beeps K will blink twicein the display
K Off = One beep K will blink oncein the display
To Turn Ku Band On and Off
While no signalis being detected,press and holdthe City buttonfor two secondsagain.
Tone Visual Display
Ku On = Two beeps X and K will blink twicein the display
Ku Off = One beep X and K will blink oncein the display
-
8/8/2019 Cobra Xrs933o
10/15
Detectionn r r i n r
i nrr n
i
n r n
Your Detector
Nothing Comes Close to a Cobr
Detectionn r r i n r
i nrr n
i
n r n
Your Detector
English14
Radar Signals and Visual Displays
Type of Signal Visual Display
X Band Radar X and Signal Strength
K Band Radar K and Signal Strength
Ka Band Radar Ka and Signal Strength
Ku Band Radar X K and Signal Strength
Laser Signal Detected
XK Ka V S L
Laser Signals and Visual DisplaysType of Signal Visual Display
LTI 20-20* L is Steady
LTI Ultra-Lyte* L is Steady
Kustom Signals ProLaser* L is Steady
Kustom Signals ProLaser III* L is Steady
* Your detector provides 360 detection of these signals.
Safety Alert Signals and Visual Displays
Type of Signal Visual Display
Emergency Vehicles S is SteadyRoad Hazards S is Steady
Trains S is Steady
Strobe Alert Signal Detected
XK Ka V S c
Strobe Alert Signals and Visual Displays
Type of Signal Visual Display
3M Opticom or Tomar* S Blinks
* Your detector provides 360 detection of this signal.
Safety Alert Signal Detected
XK Ka V S c
VG-2 and Spectre 1 Alert Signals and Visual Displays
Type of Signal Visual Display
Interceptor VG-2 V is Steady
Spectre 1 V Blinks
VG-2 Alert Signal Detected
XK K aV S c
Spectre 1 Alert Signal Detected
XK K aV S c
NOTEBeep rate changes with different laser alerts.
n r r i n r
i n
rr n
i
i n I n
n r y I n
NOTEThere are different tones for each Safety Alert.
n r r i n ri n
rr n
i
i n I n
n r y I n
NOTEThere are different tones for each alert.
n r r i n r
i n
rr n
i
i n I n
n r y I n
X Signal Detected
X KKa V S 2 X K Ka V S 3 X K KaV S 5 X K Ka V S 4
KSignal Detected Ka S ignal Detected Ku S ignal Detected
-
8/8/2019 Cobra Xrs933o
11/15
Description InterpretationRecommendedResponse
Tone repeats slowly atfirst, then speeds uprapidly.
Probabl y pol ice r adar FULL ALERT
Tone sounds onetime only.
Probably a false alarm,but possibly pulsed radar,VG-2, or Spectre 1 nearby
Exercise caution
Tone instantly beginsrepeating rapidly.
Radar, VG-2, or Spectre 1nearby has been activatedsuddenly
FULL ALERT
Tone repeats slowly as youapproach a hill or bridge,then speeds up sharply asyou reach it.
Probably policeradar beyond thehill or bridge
FULL ALERT
Tone repeats slowlyfor a short period.
Probably a false alarm Exercise caut ion
Any type of laser alert . Laser alerts arenever false alarms
FULL ALERT
Any Safety Alertor Strobe Alert.
You are nearing anemergency vehicle,
railroad crossing,or road hazard(construction,accident, etc.)
Exercise caution
Understanding Radar and Lasern r r i n r
i nrr n
i
n r n
Your Detector
Nothing Comes Close to a Cobr
Understanding Radar and Laser
Radar Speed Monitoring SystemsFour band frequencies have been approved by the Federal CommunicationsCommission (FCC) for use by speed monitoring radar equipment:
X band 10.525 GHzK band 24.150 GHzKa band 33.400 36.00 GHzKu band 13.435 GHz
Your detector detects signals in all four radar bands.
VG-2 and Spectre 1VG-2 and Spectre 1 are detector detectors that work by detecting low-levesignals emitted by most radar detectors. Your detector does not emit signalsthat can be detected by VG-2 or Spectre 1, but does detect VG-2 and Spectresignals and will alert you when a device is in use near you r vehicle, if youso choose.
Safety Alert Traffic Warning SystemFCC-approved Safety Alert transmitters emit microwave radar signals thatindicate the presence of a safety-related concern. Depending on the frequencof the signal emitted, it can indicate a speeding emergency vehicle or train,or a stationary road hazard.
Because these microwave signals are within the K band frequency, mostconventional radar detectors will detect Safety Alert signals as standardK band radar. Your detector, however, is designed to differentiate betweenstandard K band and Safety Alert signals, and give separate alerts for each.
Safety Alert technology is relatively new. Safety Alert transmitters canbe found in limited numbers in all 50 states, but the number is growing.Depending on your location, you may not receive these alerts regularlyand may often encounter emergency vehicles, trains and road hazards
without being alerted. As the number of transmitters increases,these alerts will become more common.
When you receive such an alert, please watch for emergency vehicles aheadof you, on cross streets and behind you. If you see an emergency vehicleapproaching, please pull over to the right side of the road and allow it to pas
Detectionn r r i n r
i nrr n
i
n r n
Your Detector
English
Instant-On DetectionYour detector is designed to detect Instant-On speed monitoring signals,which can suddenly appear at full strength.
NOTEYou should take appropriate actionimmediately whenever an instant-on alert is given.
Responding to Alerts
16
n r r i n ri n
rr n
i
n r y I n
-
8/8/2019 Cobra Xrs933o
12/15
Maintenancen r r i n r
i nrr n
i
n r n
Your Detector
Nothing Comes Close to a Cobr
Understanding Radar and Lasern r r i n r
i nrr n
i
n r n
Your Detector
English
Strobe AlertSpecial strobes mounted on the light bars of authorized emergencyvehicles (fire trucks, police cars, ambulances) automatically change trafficsignals as the vehicle approaches an intersection. These strobes and thespecial strobe detectors located on the traffic signals, introduced fairlyrecently by 3M and Tomar, are already in use in more than 1000 citiesnationwide. Cobras exclusive Strobe Alert detector will detect thesespecial strobes and give an emergency vehicle alert.
When you receive such an alert, please watch for an approachingemergency vehicle and pull over to allow it to pass. To inquire aboutcoverage in your area, contact your local fire and police departments.
LIDAR (Laser)The correct name for the technology that most people refer to aslaser is actually LIDAR, which stands for Light Detection and Ranging.
LIDAR operates much like radar. Its signal spreads out like a radarsignal, though not as widely. Unlike radar, LIDAR must have a clearline of sight to its target vehicle throughout the entire measurementinterval. Obstructions such as sign posts, utility poles, tree b ranches,etc., will prevent valid speed measurement.
Some common questions about LIDAR include:
s Does weather have any affect on LIDAR?Yes. Rain, snow, smoke, fog, or airborne dust particles will reduce theeffective range of LIDAR and can, if dense enough, prevent its operation.
s Can LIDAR operate through glass?Yes. Newer LIDAR guns can obtain readings through most types of glass.However,the laser pulse also can be received through glass to triggeran alarm by your detector.
s Can LIDAR operate while in motion?No. Because LIDAR operates by line of sight, the person using it cannot
drive the vehicle, aim and operate the gun all at the same time.s Is LIDAR legal to use?
Yes. It is legal in all 50 states.
18
Maintenance
Maintenance of Your Radar DetectorYour detector is designed and built to give you years oftrouble-free performance without the need for service.No routine Maintenance is required.
If your unit does not appear to be operating properly,please follow these troubleshooting steps:
s Make sure the power cord is properly connected.
s Make sure the socket of your vehicles cigarette lighteris clean and free of corrosion.
s Make sure the power cords cigarette lighter adapteris firmly seated in your cigarette lighter.
s Check the power cord fuse. (Unscrew the ribbed end capof the cigarette lighter adapter and examine the fuse.If required, replace it with a 2-amp fuse only.)
-
8/8/2019 Cobra Xrs933o
13/15
Warrantyn r r i n r
i n
rr n
i
n r n
Warranty
Nothing Comes Close to a Cobr
Specifications
English
Specifications
Band and Frequencies
Band Frequencies
X Band 10.525 0.050 GHz
K Band 24.125 0.125 GHz
Safety Alert 24.070 0.010 GHzTraffic Warning 24.110 0.010 GHzSystem
24.190 0.010 GHz
24.230 0.010 GHz
Ka Band 34.700 1.300 GHz
Ku Band 13.435 0.035 GHz
Laser 910 50 nm
Strobe 700 300 nm
Unit Dimensions and Weight
Dimensions* (H x W x D) Weight*
113" x 234" x 413" 4.83 oz.
(34 mm x 70 mm x 110 mm) (137 g)
* Dimensions and weight measurements are approximate.
This radar detector is covered by one or more of the following U.S. patents: 5,497,148; 5,594,432;5,612,685; 6,078,279; 6,094,148. Additional patents may be listed inside the product or pending.
20
Limited 1-Year Warranty
For Products Purchased in the U.S.A.
Cobra Electronics Corporation warrants that its Cobra 12 Band Radar/LaserDetectors, and the component parts thereof, will be free of defects inworkmanship and materials for period of one year from the date of firstconsumer purchase. This warranty may be enforced by the first consumerpurchaser, provided that the product is utilized within the U.S.A.
Cobra will, without charge, repair or replace, at its option, defective 12 BandRadar/Laser Detectors, products or component parts upon delivery to theCobra Factory Service Department, accompanied by proof of the date of firsconsumer purchase, such as a duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship the product forwarranty service, but the return charges will be at Cobras expense, if theproduct is repaired or replaced under warranty.
This warranty gives you specific rights, and you may also have other rightswhich vary from state to state.
Exclusions: This limited warranty does not apply:
1. To any product damaged by accident.
2. In the event of misuse or abuse of the product or as a resultof unauthorized alterations or repairs.
3. If the serial number has been altered, defaced or removed.
4. If the owner of the product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness foa particular purpose are limited in duration to the length of this warranty.
Cobra shall not be liable for any incidental, consequential or other damages;including, without limitation, damages resulting from loss of use or cost ofinstallation.
Some states do not allow limitations on how long an implied warranty lastsand/or do not allow the exclusion or limitation of incidental or consequentialdamages, so the above limitations may not apply to you.
n r r i n ri n
rr n
i
n r n
Your Detector
-
8/8/2019 Cobra Xrs933o
14/15
Trademark Acknowledgementn r r i n r
i nrr n
i
n r n
CustomerAssistance
Nothing Comes Close to a Cobr
Product Servicen r r i n r
i nrr n
i
n
CustomerAssistance
English
Product Service
For any questions about o perating or installing this new Cobra product, or ifparts are missingPLEASE CALL COBRA FIRSTdo not returnthis product to the store! See customer assistance on page A1.
If this product should require factory service, please call Cobra first at773-889-3087 BEFORE sending the product. This will ensure the fastestturnaround time on any repair.
If Cobra asks that the product be sent to its factory, the following must befurnished to have the product serviced and returned:
1. Send the complete unit, including power cord. (It is not necessaryto include the mounting bracket.)
2. For warranty repair, enclose some form of proof-of-purchase,
such as a photocopy or carbon copy of a sales receipt. If yousend the original receipt, it cannot be returned.
3. Enclose a typed or clearly written description of the problemyou are having with your unit, plus the name and address whereyou want the unit returned.
4. Pack the unit securely to prevent damage during transit. If possible,use the original packing materials.
5. Ship prepaid and insured using a traceable carrier such as United ParcelService (UPS), Federal Express, or Priority mail with delivery confirmation.Ship to: Cobra Factory Service, Cobra Electronics Corporation, 6500 WestCortland Street, Chicago, IL 60707 U.S.A.
6. Please allow three to four weeks before contacting us about the statusof your service. Call 773-889-3087 for assistance. If your unit is underwarranty, it will either be repaired or replaced upon receipt, dependingon the model. If your unit is out of warranty, you will receive a letterinforming you of the repair or replacement charge.
22
Trademark Acknowledgement
Cobra, 6 Band, 9 Band, DigiView, EasySet, Extra Sensory Detection,IntelliShield, LaserEye, Nothing Comes Close to a Cobra, Safety Alert
Traffic Warning System, Strobe Alert, VG-2 Alert, Xtreme RangeSuperheterodyne and the snake design are registered trademarksof Cobra Electronics Corporation, USA.
Cobra Electronics Corporation, 12 Band, IntelliMute, Revolution SerieRoadReady, SmartPower, Spectre Alert, UltraBright, and Voice Alertare trademarks of Cobra Electronics Corporation, USA.
Opticom is a trademark of 3M Corporation. Instaclear for Ford is aregistered trademark of Ford Motor Company, Inc. Electriclear for GMis a registered trademark of General Motors Corporation. 20-20 andUltra-Lyte are trademarks of Laser Technology, Inc. ProLaser and
ProLaser III are trademarks of Kustom Signals, Inc. Bee III andPop are a trademarks of MPH Industries. Spectre is a trademarkof Stalcar. Interceptor VG-2 is a trademark of TechniSonic Industries LTD.Tomar is a registered trademark of TOMAR Electronics, Inc.
-
8/8/2019 Cobra Xrs933o
15/15
Optional Accessories
English
Optional Accessories
You can find quality Cobra products and accessories at your local Cobradealer, or in the U.S.A., you can order directly from Cobra. See orderinginfo on page 25.
24
Windshield Mounting Bracket
Includes suction cups
Item # 545-139-N-001
Straight 12V DC Power Cord
Includes plug and fuse
Item # 420-030-N-001
Coiled 12V DC Power Cord
Includes plug and fuseItem # 420-026-N-001
Dual Port Power Adapter
Includes adjustable plug(up to 90) and fuse
Item # CLP-2B
n r r i n ri n
rr n
i
n
CustomerAssistance