CMB Cone Brochure...The CMB RS225 Rockstar is a modern state-of-the-art, all roller bearing cone...
Transcript of CMB Cone Brochure...The CMB RS225 Rockstar is a modern state-of-the-art, all roller bearing cone...
CMB RS225 Rockstar Cone CrusherDesigned, Developed and Manufactured by CMB International
The CMB RS225 Rockstar is a modern state-of-the-art, all roller bearing cone crusher. Thecrusher features hydraulic adjustment whichenables the operator to rapidly change thedischarge setting, if necessary during crushing.
The machines hydraulics also incorporate tramp metalrelease, automatic reset and an unblocking feature whichwill clear the crushing chamber quickly.
Re-metalling is carried out with the crushing head in situ.The short shaft configuration, which requires no topbearing, enables all major components to be removedfrom above and demands minimal headroom forinstallation and maintenance.
The proven all roller bearing design provides for lowerpower consumption, long life, easy spares availabilityand the need for a more compact lubrication system.
Product features:
• High outputs of good product shape
• Unattended operation
• Fast and simple adjustment
• Minimal maintenance
• Large unobstructed feed opening
• Takes unscreened feed
INTRODUCTION
A A
RS225 ROCKSTAR CONE CRUSHER - FEATURES RS225 ROCKSTAR CONE CRUSHER - TECHNICAL SPECIFICATION
CMB Wedgeun-jam facility.
Big vertical lift allowslarge uncrushableobjects to passfreely.
Rotary seal ringprotected by conehead skirt.
Transducer built intohydraulic rams.
Larger distance between upperframe skirt and cone head skirtto reduce material build-up.
Improved dynamicbalance.
Thick Manganese for long life.Specially curved profile allowsfor unscreened feed, producinggood shaped product.
Large unobstructed feed opening (no large mantlenut to restrict opening). Takes up to 280mm feed.
One piece upper frame, nobolts or nuts to tighten onre-metal.
Automatic hydraulically tensionedwedge (no studs to tighten).
Stainless steel hydraulic jacks withheat-treated piston.
Heavy duty cast countershaft shieldand frame arm shield.
Large diameter alloy steelmain shaft for extra strength.
Pin type cage taper bearings withspecially heat-treated inner race(to restrict impact damage).
AB
E F
D
C
Dimensions (mm) RS225
A 2,380
B 1,420
C Min: 1,941
Max: 2,238
D 299
E 2,380
F 1,413
RS225
Kw 225 - 250
Flywheel RPM 720
Weight 21,000kg
Cubic contentsExport boxed 32m3
RS225 ROCKSTAR CONE CRUSHER - TECHNICAL SPECIFICATION
10
0
20
30
40
50
60
70
80
90
100
1.70
Capacity based on crushing clean dry stone with a bulk density of 1.6 tonnes per cubic metre.
1.18 2.36 3.35 5.00 6.30 10.00 14.00 20.00 28.00 40.00 50.00 63.00 75.00 100.00 150.00 200.00 250.00
Percentage Passing
Screen Mesh Size (mm)
CMB RS225 Typical Product Analysis
22mm
25mm
28mm
32mm
FEED
Cone Model Max Feed Size Min C.SS
RS225 280mm 22mm22mm 25mm 28mm 32mm
210 - 230 225 - 280 240 - 280 250 - 330
Closed Side Settings (mm) & Approx. Capacities (T.P.H.)
CMB International Limited
Little Alton Farm The Altons Ravenstone Leicestershire LE67 2AA U.K.
Tel: ++44 (0) 1530 563600 Fax: ++44 (0) 1530 563900 Email: [email protected]
Web: www.cmb.uk.com
Company Registered in England and Wales No. 3753430
All reasonable steps have been taken to ensure the accuracy of this brochure. Due tocontinuous development however, CMB International reserve the right to amend the
specification without notice. 07/12