CLIPS & CONNECTORS - Studco Systems CLIPS & CONNECTORS Phone: 800.675.8023 sales@ CLIPS & CONNECTORS

download CLIPS & CONNECTORS - Studco Systems CLIPS & CONNECTORS Phone: 800.675.8023 sales@ CLIPS & CONNECTORS

of 12

  • date post

    27-Jul-2020
  • Category

    Documents

  • view

    0
  • download

    0

Embed Size (px)

Transcript of CLIPS & CONNECTORS - Studco Systems CLIPS & CONNECTORS Phone: 800.675.8023 sales@ CLIPS & CONNECTORS

  • C L IP

    S &

    C O

    N N

    E C

    T O

    R S

    30 Phone: 800.675.8023 sales@studcosystems.com

  • 31

    800.675.8023

    C L IP

    S &

    C O

    N N

    E C

    T O

    R S

    Phone: 800.675.8023 sales@studcosystems.com 31

    ® CLIPS & CONNECTORS

    Metal Furring Channel Clips are used to connect furring channels to the cold rolled channel in a drywall ceiling application. The furring channel is installed at right angles to the CRC to create a grid system so the drywall can be screwed to the furring channels.

    A237 SOUND ISOLATION CLIP Studco Part # Description

    A237 Furring Channel Sound Isolation Clip

    MFFC METAL FURRING CHANNEL CLIP Studco Part # Description

    MFFC Furring Channel Sound Isolation Clip

    MBF - BETAFIX DIRECT ADJUSTABLE FURRING CHANNEL CLIP

    Studco Part # Clip Height Metal Thickness Clip Width x length Height of rubber*

    MBF 1" .069" / 14 gauge 1-1/8" x 4-7/8" -

    Adjustable Furring Channel clips with 4 positions at 3/16” increments to adjust Furring Channel, Eliminating packers.

    Resilmount A237 can be used in wall and ceiling applications with Studco 7/8” & 1-1/2” furring channel.

    The M74 bracket is a straight bracket that is used to accommodate to M21 5mm wire rod at the ceiling connection. The 90 Degree M47 bracket is used to accommodate to M21 5mm wire rod at the ceiling connection.

    This innovative design let you adjust your suspended ceiling during the installation process. This suspension hanger has been UL Tested and approved to carry up to 500 LBS. / Clip* *Clip must be used with M21 5mm Wire

    M534 Studco Part # Description

    M534 Furring Channel Sound Isolation Clip

    M74 / M47 Studco Part # Description

    M74 5mm Galvanized Straight Rod Bracket

    M47 5mm Right Angle Galvanized Rod Bracket

    M74

    M47

    2 3/8”

    3 1/16”

    11/16”

  • 32

    www.studcosystems.com

    C L IP

    S &

    C O

    N N

    E C

    T O

    R S

    Phone: 800.675.8023 sales@studcosystems.com

    CLIPS & CONNECTORS - JOIST HANGER

    CLIPS & CONNECTORS - WEB STIFFENER

    Studco Building Systems Web Stiffeners are designed to strengthen the webs of Joists to prevent web crippling. They come in various lengths from 5-3/4” to 15-3/4” to suit the Joist width for easy installation by the contractor. They are produced out of prime galvanized 50ksi 54 mil steel. Web Stiffeners are used on the inside or back side of the joist in point load or extra load conditions, under walls or where point loads are requested to satisfy engineering needs.

    Studco Building Systems Bridle Joist Hangers are made from heavy duty 97mil (12ga) 50 KSI galvanized steel. They come in a range of Standard sizes from 6” to 16” in singles and doubles. Custom sizes are available upon request. All standard size bridle hangers are in stock ready for fast delivery. They are an easy to use joist hanger designed to attach Light Gauge Metal Joists to concrete block, lumber topped plates and steel beams. The connection of light gauge joists is made simple and easy for the installer to construct floor and roof conditions for the construction industry.

    BRIDLE JOIST HANGER Studco Part # Description H W B

    JH2.06-697 6” Single 6” 2-1/16” 2” JH4.18-697 6” Double 6” 4-1/8” 2” JH1.62-897 8” 1-5/8”flg 8” 1-11/16” 2” JH2.06-897 8” Single 8” 2-1/16” 2” JH4.18-897 8” Double 8” 4-1/8” 2” JH1.62-1097 10” 1-5/8” flg 10” 1-11/16” 2” JH2.06-1097 10” Single 10” 2-1/16” 2” JH4.18-1097 10” Double 10” 4-1/8” 2” JH2.06-1297 12” Single 12” 2-1/16” 2” JH4.18-1297 12” Double 12” 4-1/8” 2” JH2.06-1497 14” Single 14” 2-1/16” 2” JH4.18-1497 14” Double 14” 4-1/8” 2” JH2.06-1697 16” Single 16” 2-1/16” 2”

    WEB STIFFENER Studco Part # Mil Joist Size (w) Length

    WS-4X534 54 6” 5-3/4” WS-4X734 54 8” 7-3/4” WS-4X934 54 10” 9-3/4” WS-4X1134 54 12” 11-3/4” WS-4X1334 54 14” 13-3/4” WS-4X1534 54 16” 15-3/4”

    This rod is 5mm is used in applications where suspension from the ceiling above is needed. This soft Galvanized rod has been UL tested as an assembly with the M534 spring hanger. Cannot be substituted with 3/16” rod.

    M21 Studco Part # Description

    M21 5mm Galvanised Wire Rod

    CLIPS & CONNECTORS

  • 33

    800.675.8023

    C L IP

    S &

    C O

    N N

    E C

    T O

    R S

    Phone: 800.675.8023 sales@studcosystems.com

    BYPASS FRAMING SIDE-CLIP CONNECTORS

    At Studco, we are dedicated to providing our customers with the best products, however, we cannot manufacture all of them ourselves. We partnered with Simpson Strong-Tie to provide our customers with the best clips and connectors on the market for steel-studs. This is what we are offering:

    The SCB/MSCB side-clip connectors are high performance connectors for bypass framing applications designed to reduce design time and overall installed cost. Various anchorage methods have been tested, and the resulting allowable loads eliminate the need to design connector anchorage. The SCB/MSCB can accommodate applications that typically require two parts with a single connector, reducing material and labor cost. These connectors are manufactured in five different lengths to accommodate a variety of stand-off conditions and steel-stud sizes.

    The IDCB45.5 drift-clip connector is used to secure bypass stud framing to the edge of a slab. The connector will accommodate 1" of lateral drift in each direction and 1" of upward and downward vertical deflection. Tested load values are provided for anchorage to a steel edge angle using #12 x 1 1/4" Strong-Drive XL Large-Head Metal screws.

    Features: • Provides a full 1" of both upward and downward movement • The precision-manufactured shouldered screws provided with the SCB/MSCB connector

    are designed to prevent overdriving and to ensure the clip functions properly • Strategically placed stiffeners, embossments and anchor holes maximize connector performance • Simpson Strong-Tie® “No-Equal” stamps mark the center of the slots to help ensure correct

    shouldered-screw placement. Material: SCB – 54 mil (16 ga.); MSCB – 68 mil (14 ga.) Finish: Galvanized (G90)

    Features: • Horizontal embossments and corner gussets optimize performance in the F2 load direction. • Precision-manufactured shouldered screws provided with the IDCB connector are designed

    to prevent overdriving and to ensure the clip functions properly • Simpson Strong-Tie® “No-Equal” stamps mark the center of the slots to help ensure correct

    shouldered-screw placement. Material: 97 mil (12ga.) Finish: Galvanized (G90)

    SCB/MSCB SLIDE-CLIP CONNECTORS Studco Part # Thickness mil (ga.) L (in.) A (in.) B (in.)

    SCB43.5 54 (16) 3-1/2 1-1/2 4

    SCB45.5 54 (16) 5-1/2 1-1/2 4

    SCB47.5 54 (16) 7-1/2 1-1/2 4

    SCB49.5 54 (16) 9-1/2 1-1/2 4

    SCB411.5 54 (16) 11-1/2 1-1/2 4

    IDCB DRIFT-CLIP CONNECTORS Studco Part # Thickness mil (ga.) L (in.) A (in.) B (in.)

    IDCB45.5 97 (12) 5-1/2 3-1/2 4

    SCB43.5 SCB45.5 SCB47.5 SCB49.5 SCB411.5

    IDCB45.5

    L

    B B B

    B B

    B

    A A A A A

    A

    L L L L

    L

  • 34

    www.studcosystems.com

    C L IP

    S &

    C O

    N N

    E C

    T O

    R S

    Phone: 800.675.8023 sales@studcosystems.com

    BYPASS FRAMING SIDE-CLIP CONNECTORS

    Ideal for high-seismic areas, Simpson Strong- Tie SC connectors are the optimal solution for slide-clip bypass framing. SC clips are often welded to the structure in high-seismic zones, but they also feature anchorage holes so that concrete screws or powder-actuated fasteners can be used to attach the clip to the structure. In addition to anchorage versatility, the SC clips include "No-Equal" stamps at the center of the slots to ensure proper shouldered screw placement. Embossments in the bendline provide increased strength and stiffness in the F1 and F2 load directions, but are positioned towards the center of the clip so that 1 1/2" long welds can be applied at the top and bottom of the clip. SC connectors are manufactured using heavy-duty 10- and 12-gauge steel to provide exceptional resistance to in-plane seismic load.

    Features: • The clips come in lengths of 3 1/2", 6" and 8" for use with 3 5/8"," and 8" studs respectively • The maximum stand-off distance is 1" for 3 5/8" studs and 1 1/2" for 6"and 8" studs • Provides a full 3/4" of both upward and downward deflection • Prepunched large-diameter anchor holes accommodate 1/4" -diameter concrete screws like

    the Simpson Strong-Tie Titen HD • Prepunched small-diameter anchor holes accommodate powderactuated fasteners like the

    0.157"-diameter Simpson Strong-Tie PDPAT or the #12 self-drilling Simpson Strong-Tie Strong-Drive XL Large-Head Metal screw

    • Precision-manufactured shouldered screws, provided with SC connectors, are designed to prevent overdriving and to ensure the clip functions properly

    Material: SC32/62 – 97 mil (12 ga.); SC82 – 118 mil (10 ga.) Finish: Galvanized (G90)

    SIMPSON STRONG-TIE SC CONNECTORS Studco Part # Thickness mil (ga.) L (in.) A (in.) B (in.)

    SC32 97 3-1/2 7/8 1-1/4

    SC62 97 6 1-1/8 1-1/2

    SC82 118 8 1-5/8