Cisco IP Phone

Onslow County SchoolsVoIP Training

Description of Phones Cisco 7911

Display

Scroll

Menu

Volume

Soft keys

Hold

Description of Phones Cisco 7942/7962

Scroll

Display

FeaturesVolume

Soft keys

Line Buttons

Description of Phones• Display:

− The Display area is where you will see your extension.• Line Buttons: (for 7942, and 7962)

− Use these buttons to select which line on the phone to use. Every user has anywhere from 1 to 6 lines.

• Soft Keys:− These keys change their function according to what you are

doing on the phone. Their function is identified in the LCD Display directly above the key.

• Scroll:− Use this button to scroll between various menus, fields and

screens.• Features:

− Use these buttons to access various menus and/or voicemail.

School Extension List• Each school has a two digit prefix for their 5

digit extension. Replace the xx with the two digit prefix for the school to get their 5 digit extension.

• Example: OCBOE’s two digit prefix is 20 IT Helpdesk is xx5555 digit extension is 20555

School 2 Digit Prefix List• Location

Prefix• OCBOE 20• BFES 23• BCES 24• CEES 26• DES 27• HCES 30• JCES 32• MES 35• NWES 38• PWES 41• QCES 42• RPS 43• RES 44•

• LocationPrefix

• SRES 46• SDES 47• SWES 48• SSES 52• SBES 53• TECC 56• DMS 28

• HCMS 31• JCMS 33• NBMS 36• NPMS 39• SWMS 49• SBMS 54

• LocationPrefix

• TMS 57• DHS 29• JHS 34• NHS 37• RHS 45• SWHS 50• SBHS 55• WOHS 58• Bus Garage 21• OCLC 40• CFES 25• MVES 22• STES 51

3 Digit Suffix• Front Desk xx000• Principal xx001• Asst. Principal(s) xx002 –

xx004• Data Manager xx005• Media Center xx006• Secretary xx007• Cafeteria xx008• Nurse xx009• Guidance Dept Head xx010• Guidance Dept xx011 –

xx014

• Social Worker xx015• Bus Coordinator xx016• Classrooms xx(Room

Number)• If a school has phones in

classrooms then the phone number for the phone will be xx plus the 3 digit room number.

• Example: room 100 = xx100

Using the PhoneDialing Numbers• To dial 5 digit Extensions just dial the 5 digit number.

• To make calls Outside the District, you must first dial the number 9 and then the rest of the phone number.

• To make Long Distance Calls you must first dial 9 1 and then the rest of the phone number.

• To make International Calls first dial 9 0 1 1 and then the rest of the phone number.

• IMPORTANT: If you accidentally dial 911 stay on the line and tell them you dialed it on accident!

• Long distance and international calling is not available unless approved by a department head.

Using the Phone7911• The 7911 phone has almost all of the features

that the 7942 and 7962 phones have. The difference is you have to press the menu button and use the scroll button to select: settings, messages, directories, etc.• Example: in order to go to the settings, press the

Menu button then scroll to settings and press the select soft key.

Ring VolumeTo change the ring volume, follow these steps:

Press the Volume button on the phone to the desired ring volume.This will change the ring volume for all future calls.

Features• Directories• There are four Directories on the phone.

− Missed Calls− Received Calls− Placed Calls− Corporate Directory

• The Missed, Received, and Placed Calls directories can be cleared, however the Corporate Directory can never be cleared by a staff member.

Features• Corporate Directory• The Corporate Directory lists all staff

members in the District and their 5 Digit Extension.

• To use the directory to find a personal phone number, follow these steps:− Press the Directories button on the phone.− Using the scroll button select the

Corporate Directory.− Using the number pad and the

corresponding letters on the numbers, enter either a partial or full first name, or last name of the person you are looking for in the system.

− Then press the Search Soft Key button on the phone.

Features• Corporate Directory

− Your results will then be displayed and you can use the Scroll button to scroll through the names.

− Once you have highlighted the name of the person you wish to call, you can pick up the handset of the phone.

− The phone will automatically dial the number for you.

Features• Corporate Directory

−If you want to find every number at a school enter in the 2 digit extension in the number: field and press search.

Features• Conversation Volume• To change the volume of the conversation you are

having while on the phone, follow these steps:−Press the volume button on the phone to the

desired volume level.−To save the volume level for all future calls,

press the Save Soft Key button after you have reached the desired volume level.

Call Transfer• To Transfer a call while on the

phone, follow these steps:−Press the (Transfer) Soft Key.−Using the number pad on the phone,

enter the 5 digit extension of the person to whom the call should be transferred.

−Press the (Transfer) Soft Key again.• If you do not press the transfer key the

second time, the phone call will not reach the intended person, instead you will be connected to the person whose extension you dialed.

Conference Calls• To make a Conference Call please follow these

steps:− Call the first party involved in the conference call.− While on the line with the first party, press the More

Soft Key button on the phone.− Then press the CONFRN Soft Key button on the phone.− You will then hear dial tone.− Dial the phone number of the second party involved in

the conference call.− Once the second party is connected, press the CONFRN

Soft Key button.− All three lines will now be connected and able to talk

together.

Voice Mail

• Not all staff members have access to voicemail.

• If a person doesn’t have voicemail, and they aren’t available to answer the phone, the call will be sent to the receptionist for him/her to take a message.

Voice Mail• To access voicemail then press the messages button on your phone.−If it is the first time you are

accessing your voice mail account, your password will be “612345”.

−Follow all prompts and don’t hang up until it says you’re finished. If you hang up early it will not save your settings.

• Call Park allows you to place a call on hold, so it can be retrieved from another phone.

− While in an active phone call: Press the “more” soft key, then the “Park” soft key.

− The call will be placed on hold, and you will be prompted with “Call park At ###”.

− The ### will be a number.• To Retrieve the call enter

the number that showed up for “call park At ###” and press dial from any Cisco phone.

Call Park

MCID (Malicious Caller ID)• MCID – pressing the “MCID”

soft key will flag the call as “malicious” and make information about the call be readily available.

• Press the “MCID” soft key while on the phone.

• NOTE: Still follow all previous steps regarding threatening phone calls, including calling the police immediately after the phone call ends.

QRT (Quality Reporting Tool)

• QRT – the QRT or Quality Report Tool collects streaming data about the phone call.

• Pressing this button during statically, or “Robot” sounding phone calls can help locate the source of the interference.

• To use, press “more” 2 times and then the “QRT” soft key.

• Follow this with an email to the IT department with your phone number, time of call and that you pressed the QRT key.

Troubleshooting • If you are having any problems

with your phone check these things before opening a work order.−Make sure the cable plugged

into “SW” goes to the wall network jack not a PC.

−Computers are plugged into the “PC” Port.

−Press ( settings **#** ) this will reset your phone.

−If the screen isn’t powered on check the power cable.