circuit breakers - Schneider Electricms.schneider-electric.be/Main/SF/instructions/7896901uk.pdf ·...
Transcript of circuit breakers - Schneider Electricms.schneider-electric.be/Main/SF/instructions/7896901uk.pdf ·...
instructions foruse
SF2 fixed
MV distributioncircuit breakerat your service
circuit breakers
Anglais
7896901EN revision : 01 1
foreword 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .symbols and conventions 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .as per iso 3864---2 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .contact the Schneider Electric service unit for diagnosis and advice 4distribution rules 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .safety rules 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
general description 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .fixed circuit breaker with GMh operating mechanism 5. . . . . . . . . . . .
handling and storage instructions 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .identification 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SF2 dimensions 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .unpacking and handling 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .handling 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .storage 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
installation instructions 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .phase identification 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .installing an SF2 circuit breaker 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .connection to the earth bar 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .upper MV electrical connections 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . .lower MV electrical connections 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LV electrical connections 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .remounting the cover plates 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .electrical diagram n˚730710 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .electrical diagram n˚730720 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .electrical diagram n˚732640 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .electrical diagram n˚731415 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
operating instructions 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .operating mechanism front plate 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .manual charging of the circuit breaker 25. . . . . . . . . . . . . . . . . . . . . . . . .remote operation 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .circuit breaker locking 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
preventive maintenance 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .foreword 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .summarising table 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .preventive maintenance and cleaning instructions 30. . . . . . . . . . . . . .checking arcing contact wear 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .lubricating the spring guides 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .operating mechanism unit 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .latching unit 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .gear motor 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
corrective maintenance 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .foreword 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .summarising table 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .replacing the keylocking (optional) 40. . . . . . . . . . . . . . . . . . . . . . . . . . . .replacing the closing springs 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .replacing a release 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .the different release positions in the operating mechanism 44. . . . . . .according to position I 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .according to position II 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .according to position III or IV 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .according to position V 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .replacing the motor of the gear motor 46. . . . . . . . . . . . . . . . . . . . . . . . .replacing a microswitch (SE) 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .replacing an end of charging contact 47. . . . . . . . . . . . . . . . . . . . . . . . . .replacing an antipumping relay 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .replacing an auxiliary contact unit 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . .SF6 gas recovery 51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 7896901EN revision : 01
problems, probable causes and their solutions 52. . . . . . . . . . . . . . . . .
INFORMATION--ADVICEWe draw your attention to this specific point.
DANGER
CAUTION
WARNING
as per iso 3864---2
as per iso 3864---2
as per iso 3864---2
DANGER: failure to follow thisinstruction will result in death or seriousinjury.
WARNING: failure to follow thisinstruction may result in death orserious injury.
CAUTION: failure to follow thisinstruction may result in injuries.This alert signal can also be used to indicatepractices that could damage the SM6 unit.
7896901EN revision : 01 3
symbols andconventions
Caution:you will find all the symbolsbelow throughout thedocument, indicatingthe hazard levelsdepending on thedifferent types of situation.
foreword
4 7896901EN revision : 01
contact the SchneiderElectric service unit fordiagnosis and advice
Call your sales representative whowill put you in contact withthe closestSCHNEIDER ELECTRICgroup service centre.You can log on to:www.schneider--electric.com
distribution rules The aim of this publicationis to enable the SF6 unitto be installed correctly.
This document is not a commercialdocument.It is a strictly technical documentdrawn up by Schneider Electric.
safety rulesCAUTION
All the operations described belowmust be performed in compliancewith applicable safety standards,under the responsibilityof a competent authority.
WARNING
The contractor must be certifiedand authorised to manipulateand perform work on the SF6unit.
CAUTION
Only undertake the work afterhaving read and understoodall the explanations given in thisdocument.If you have any difficulty complyingwith these rules, please contactSchneider Electric.
1250A
7896901EN revision : 01 5
fixed circuit breakerwith GMh operatingmechanism1250 A (IEC)1200 A (ANSI)
Note : The moving chassis shownin the diagram for the 1250 A SF2may be mounted on all the circuitbreakers presented in this manual.
A : SF6 pole unitsB : circuit ---breaker frameC : GMh operating mechanismD : operating mechanism front plateE : operating leverF : front coverA : pressure switchB : moving chassis
LV connections CJ : top wiring exitK : bottom wiring exit
MV connectionsL : upper pole terminals (1250 Aand 1200 A ANSI standard)
M : lower terminals (1250 A).N : deflector (200 kV, ANSIstandard)
general description
P P P P
F
D
K
NP
J
KB
Q Q Q Q
F
D
K
J
G K
B
E
E
2500 A (40.5kV) (CEI)2500 A (AINSI)
2500 A et 3150A (CEI)3000 A (AINSI)
J
Q
J
6 7896901EN revision : 01
2500 A (40,5 kV) (IEC)2000 A (ANSI)2500 A and 3150 A (IEC)3000 A (ANSI)
A : SF6 pole unitsB : circuit ---breaker frameC : GMh operating mechanismD : operating mechanism front plateE : operating leverF : front coverG : pressure switch
LV connections DJ : top wiring exitK : bottom wiring exit
MV connectionsN : deflector(200 kV, ANSI standard)E
P : upper terminals (2000 A)lateral terminals (2000 A)
Q : upper terminals(2500/3000/3150 A)lower terminals(2500/3000/3150 A)
R R R RT
J
EC
KB
G
UV
F
DK
J
7896901EN revision : 01 7
2500 A CHINE (IEC)
A : SF6 pole unitsB : circuit ---breaker frameC : GMh operating mechanismD : operating mechanism front plateE : operating leverF : front coverG : pressure switch
LV connectionsJ : top wiring exitK : bottom wiring exit
MV connectionsF : superior armGH : upstream connectionI : inferior armJ : dowstream connection
8 7896901EN revision : 01
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EA
C
B
F
11)
1)2)3)4)5)6)
9)
7)
8)
10)
7896901EN revision : 01 9
identification Check that :H the characteristics indicated onthe plates correspond to those onthe order form.
H the connection diagram isincluded with the circuit breaker.
identification plates
A : circuit ---breaker typeand characteristics
B : operating---mechanism andauxiliary characteristics
C : undervoltage---release optionD : keylocks optionE : earthing connection
contactor and auxiliariesrating plates1 : device type designation2 : rated voltage3 : rated lightning impulsewithstand voltage
4 : rated continous operatingcurrent
5 : rated breaking capacityfor CC 3s
6 : no--- load breaking capacity7 : rated operating sequence8 : class9 : SF6 mass10 : reference standard11 : characteristics informationplates
option labels
Red label indicating theundervoltage trip device option. Label indicating the keylocking
option.
handling and storage instructions
DC
A B
E
300
A B
C
D
E
300
A
D
C
300
EB
C
D
A B E
300
10 7896901EN revision : 01
SF2 dimensions1250 A (IEC)1200 A (ANSI)Note : the optional moving chassisshown in the diagram may bemounted on all the circuit breakerspresented in this manual.
2500 A CHINE (40,5 kV) (IEC)
2500 A (40,5 kV) (IEC)2000 A (ANSI)
2500 A and 3150 A (IEC)3000 A (ANSI)
7896901EN revision : 01 11
SF2 fixed betweenphases
dimensionswithout moving chassis
dimensionswith moving chassis
weight in Kg
IEC standard A B C D E SF2 Chassis
1250 A 300 910 747.5 825 1030 261 159 20
400 1110 747.5 825 1030 261 212 27
2500 A CHINE 457 1224 920,5 876 1081 261 242 30
2500 Aand3150 A
300 910 774.5 942 1147 261 174 20
400 1110 774.5 942 1147 261 227 27
ANSI standard
1200 A 457 1224 747.5 825 1030 261 242 30
2000 A 457 1224 735.5 903 1108 261 242 30
3000 A 400 1110 774.5 942 1147 261 227 27
unpacking andhandling
Unpack the circuit breaker on theinstallation site.H avoid knocking and do notapply forces that could damagethe unit when removing the sidesof the packing.
WARNING
The pole units are under pressure.At the bottom of box BH do not forget to remove theoperating---mechanism lever.
removing the bottomof the packingThe procedure is the same for allSF2 circuit breakers. EE
Connect a sling or hooks to thelifting rings E and take up slackwithout lifting the circuit breaker.
A A
B
H remove the four screws AH lift the circuit breaker andremove BLower the circuit breaker to the floor.
removing the transportationsupportfixed SF2 with moving chassis
E E
Take up slack without lifting thecircuit breaker.
C
D
H remove screws CH remove support DLift and lower the circuit breaker tothe floor.
12 7896901EN revision : 01
fixed SF2 without movingchassis
EE
Take up slack without lifting thecircuit breaker.
C
D
H remove screws C and the twostabilizing plates DH remove support DLift and lower the circuit breakerwhere it will be installed.
handlinglifting
E E
Lift the fixed circuit breaker(models with or without a movingchassis) using lifting rings E.
E
Following handlingRemove the lifting rings and thescrews Enote : Save the lifting rings and thescrews in case the circuit breakermust be subsequently lifted.
rolling
Roll on a smooth, flat floor. Handlethe circuit breaker from the front.
Never push or pull on thepressurized pole units.
WARNINGOnce the circuit breaker hasbeen unpacked, it must behandled as follows :
H by lifting for circuit breakerswithout a moving chassis (usingthe lifting rings E)H by lifting or rolling for SF2 circuitbreakers with a moving chassis.
7896901EN revision : 01 13
storageCircuit breakers are shipped in theOpen (OFF) position and with theoperating mechanism discharged.
Store the circuit breaker in itsoriginal packing, in a dry, wellventilated location, protected fromrain, sprayed water and chemicalagents.Cover the circuit breaker with atrap or a cover providing effectiveprotection against dust, paint, etc.
40˚C
70˚C
---
extended storage Following extended storage,carefully clean all the insulatingparts prior to start ---up.
Clean the outer surfaces with aclean, dry cloth.
14 7896901EN revision : 01
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 2 3
7896901EN revision : 01 15
phase identification
installing an SF2circuit breaker
A
B
C
D
Circuit breaker with the movingchassisFix the moving chassis to rail Aanchored to the floor, usingangle--- iron B and bolts C.Use enough washers D to avoiddeforming angle--- iron B whentightening.
E
E
Circuit breaker without themoving chassisUse cage---nuts E.
connectionto the earth bar
The bar is located in the bottomright corner of the pole---supportstructure.
installation instructions
16 7896901EN revision : 01
upper MV electricalconnections
Pole connectionTop view of pole and theconnection insert.H tightening torque: 75 Nm(no more and no less)H two M12 tapped holes (A)H bolt insertion :--- minimum = 18 mm--- maximum = 28 mm
∅ 59
A
15 15
SF2 1250 A (IEC)1200 A (ANSI)connection to terminals usingcopper barsMinimum recommendeddimensions for bars C is :2 x 63 x 5 mm (not supplied).
B
C
Use M12 bolts (B) to connect ...
B C
the bars and fish---plates Cto the terminal.
SF2 2 500 A CHINE (IEC)Raccordement sur plage en Upar barres CUMinimum recommendeddimensions for bars L is :2 x 63 x 10 mm (not supplied).
7830
1030
∅60
DE
F
H four ∅12 holes in terminalextension DUse M10 bolts (E) ...
10
D
E
F
...to connect bars F to terminalextension D.
SF2 2 000 A (ANSI)connection to terminal extensionusing copper barsMinimum recommendeddimensions for bars C is :2 x 63 x 10 mm (not supplied).
G
7830
10
H
30
30C
∅60
H two ∅14 mm holes in terminalextension GUse M12 bolts (H) ...
H
G∅60
C
...to connect bars C to terminalextension G.
7896901EN revision : 01 17
SF22 500 A and 3 150 A (IEC)3 000 A (ANSI)2 500 Aconnection to a U terminalextension using copper barsMinimum recommendeddimensions for bars L is :2 x 100 x 8 mm (not supplied).
K
L35100
32.5
3532.5
J
H eight ∅13 mm holes in terminalIextension JUse M12 bolts (K) ...
K
L50
8 8
J
...to connect bars L to terminalextension J.
3 150 A and 3 000 Aconnection to a U terminalextension using copper barsMinimum recommendeddimensions for bars L is :4 x 100 x 8 mm (not supplied).
JM
35
100
32.5
3532.5
L
H eight ∅13 mm holes in terminalextension JUse M12 bolts (M) ....
M
508 88 810 10
J
LL
...to connect bars L to terminalextension J.
lower MV electricalconnectionsnote : deflector A for ANSIstandard circuit breakers, rated1200 and 2000 A.
pole connectionTop view of pole and theconnection insert.H tightening torque: 75 Nm(no more and no less)H four M12 tapped holes (B)H bolt insertion :--- minimum = 18 mm.--- maximum = 28 mm.
A B
SF2 1 250 A (IEC)and 1200 A (ANSI)connection to right--angleterminal extension using copperbarsMinimum recommendeddimensions for bars E is :2 x 63 x 5 mm (not supplied).
E
C
2617 47
A
H two ∅ 14.2 mm holes interminal extension CUse M12 bolts (D)...
C
D
E
...to connect bars E to terminalextension C.
18 7896901EN revision : 01
SF2 2 500 A CHINE (IEC)connection to a U terminalextension using copper barsMinimum recommendeddimensions for bars N is :2 x 63 x 8 (not supplied).
7830
1030
∅60
FGH four ∅ 12 to terminal extensionF holes in terminal extensionUse M10 bolts (G) ...
10
F
GH
...to connect bars H to terminalextension F.
SF2 2 000 A ANSI standardconnection to a U terminalextension using copper barsMinimum recommendeddimensions for bars E is :2 x 63 x 5 mm (not supplied).
K
3018
E
A
H two ∅ 14 mm holes in terminalIextension J.
∅ 60J
K
E
Use M12 bolts (K) to connect barsE to terminal extension J.
SF2 2 500 A and 3 150 Aand 3 000 A ANSI standard2 500 Aconnection to a U terminalextension using copper barsMinimum recommendeddimensions for bars N is :2 x 100 x 8 mm (not supplied).
35100
32.5 49.532.5 35N
L
H eight ∅ 13 mm holes in terminalextension L
5010 10L
M
N
Use M12 bolts (M) to connect barsN to terminal extension L.
3 150 A and 3000 Aconnection to a U terminalextension using copper barsMinimum recommendeddimensions for bars N is :4 x 100 x 8 mm (not supplied). 3510
0
32.5 49.532.5 35N
P
H eight ∅ 13 to terminalextension LO
Use M12 bolts (P) to connect...
P
L
... bars N to terminal extension L.
A
A
A
A
A
A
A
A
B
B
B
7896901EN revision : 01 19
LV electricalconnections CAUTION
LV connections require removal of :H the front cover.H the operating mechanism frontplate.
removing the cover platesremoving the front cover
The charging lever must bewithdrawn before removing thefront cover.
Remove the eight screws M6 andcontact washers (A), then the frontcover.
removing the operatingmechanism front plate.
H To remove the front plateremove the four lock nuts M6 andcontact washers (B).
To remove the front plate removethe four lock nuts M6 and contactwashers (B).
remountingthe cover plates
Proceed in reverse order.
A
B
N
P
Q
C
C
20 7896901EN revision : 01
circuit---breakerLV wiring passagesWires exit via connector A or B for”customer ”connections.The LV exit may be installed on theleft side, at the top (A) or thebottom (B) of the SF2 circuitbreaker.The unused exit should be blockedwith a blanking plate C .
LV connectionsConnections must be made incompliance with the diagramsupplied with the circuit breaker.N : 5 rotating auxiliary contactsOP : 9 rotating auxiliary contactsQ : LV terminal block.
A
1
2F
B C
D
J
E
2
1H
G
7896901EN revision : 01 25
operating mechanismfront plateA operating---mechanismcharging lever.
B charging--- lever insertion point.C closing (ON) pushbutton.D opening (OFF) pushbutton.E operations counter.
F circuit ---breaker positionindicator :
1 (O) indication means circuitbreaker is open (OFF)
2 (I) indication means circuitbreaker is closed (ON)
G operating---mechanism positionindicator
H operating mechanism positionsymbols :
1 (spring compressed) operatingmechanism charged
2 (spring not compressed)operating mechanismdischarged.I
J keylocks to maintain the circuitbreaker in the open (OFF)position (option).
manual charging ofthe circuit breaker
Lever A must be inserted in slot B.To operate the circuit breaker, theoperating mechanism must becharged.
The energy stored in the springs issufficient for one closing and oneopening operation.Prior to a new cycle, the operatingmechanism must be recharged.
operating---mechanismcharging
circuit ---breakerindication
operating--mechanismindication
Position at beginning of cycle :--- circuit breaker open;--- operating mechanismdischarged. Pump the charging lever back and
forth until a click is heard..
circuit ---breakerindication
operating--mechanismindication
The circuit ---breaker positionindicator continues to show ”O’,meaning that the circuit breaker isopen (OFF).
The operating---mechanismposition indicator shows that themechanism is charged (springcompressed).
operating instructions
26 7896901EN revision : 01
circuit---breaker closingNoteClosing is impossible if a singleclosing--- lockout function is stillactivated.
CAUTION
If the circuit breaker is equippedwith an undervoltage release(option), the release...
...must be supplied with power inorder to close the circuit breaker(unless powered fromdownstream).
Press the closing (ON) pushbutton’I” to close the circuit breaker.The circuit ---breaker positionindicator F2 ...
H
F2
2
...turns to ”I”, indicating that thecircuit breaker is closed.The operating---mechanismposition indicator H2 shows thatthe mechanism is discharged.
circuit breaker opening
Press the opening (OFF)pushbutton ”O” to open the circuitbreaker.The circuit ---breaker positionindicator F1...
F
H
1
2
... turns to ”O” , indicating that thedevice is open.The operating---mechanismposition indicator H2 shows thatthe mechanism is discharged.
remote operation electrical charging of theoperating mechanismA gear motor assemblyautomatically recharges themechanism following circuitbreaker closure.
opening and closingOperation of the opening andclosing releases is remotelycontrolled.
7896901EN revision : 01 27
circuit breaker locking(option)NoteWhen the circuit breaker is fittedwith the locking option, it ispossible to inhibit circuit ---breakerclosing.
The circuit breaker may be lockedin the open position.To lock the circuit breaker :H press and hold the opening(OFF) pushbutton ”O”;H turn and remove the key.
28 7896901EN revision : 01
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7896901EN revision : 01 29
forewordsafety instructions
All the operations described belowmust be performed in accordancewith applicable safety standardsunder the supervision of acompetent authority.
To reach the various devices:H open the circuit ---breakerH cut the power supply to theauxiliary circuits and the main circuitH close then open the circuit breakerusing the push buttons in order todeactivate the operating mechanismH avoid impacts
general rules Our equipment is designed toguarantee optimum operationprovided that the servicingconditions described in thisdocument are respected.Servicing requires removal of theprotective panelling (front plate andoperating mechanism plate).Removal and refitting of the frontplate is described in the chapter“ Installation instructions ”.
The operating mechanism plate isremoved by withdrawing the 4marked screws.
cycle and servicingoperations
This device is designed to functionfor a period of 10 years or for10,000 operations in normaloperating conditions inaccordance with the IEC 694standard.
The following are recommended:--- an O/I operation at least oncea year--- a visual inspection at least onceevery 5 years to be determinedwith the Groupe Schneiderservice centres.
preventive maintenance
30 7896901EN revision : 01
summarising tabledescription maintenance supplies toolspole enclosure
dust the enclosure clothplug--- in arms clean using a degreasing agent unchlorinated solvent
degreasing agentcloth
degree of wear of the arcing contacts lamp, bellmeasure degree of wear
operating mechanismspring guide clean using a degreasing agent unchlorinated solvent
degreasing agentcloth
lubricate, oil 133 oils vacuoline oil IsoflexTopas L152 grease
brush, oiler
operating mechanism unit general cleaning clothlubricate, oil 133 oils vacuoline oil Isoflex
Topas L152 greasebrush, oiler
latching unit and linkages clean using a degreasing agent unchlorinated solventdegreasing agent
cloth
lubricate, oil 133 oils vacuoline oil IsoflexTopas L152 grease
brush, oiler
gear motor lubricate Isoflex Topas L152 grease brushpole mechanism
clean using a degreasing agent clothlubricate, oil 133 oils vacuoline oil Isoflex
Topas L152 greasebrush, oiler
preventive maintenanceand cleaninginstructions
The pressurised SF6 gasinside the pole retains all itsdielectric properties after breaking.Electrical durability is limited bycontact wear.This wear depends on device use.We draw your attention to the riskof cleaning processes. consistingof spraying solvents at highpressure.
The main drawbacks of suchprocesses are.H damage due to jet pressure andimpossibility of re--- lubricatinginaccessible fixing points.H risk of overheating due tosolvent presence on contact areas.H elimination of specialprotections.
CAUTION
Never use solvents and alcohol.
If the insulating parts are dusty, itis recommended that you removethe dust using a dry cloth.
7896901EN revision : 01 31
checking arcingcontact wearRemarque :procédure à effectuer commandesans ressort de fermeture.
removing the closingsprings CAUTION
As the operating mechanism has 2springs, mark them before removalfor identification purposes.
righthand springs
Very slightly charge the operatingmechanism using the operatinglever.
The springs are compressed.
32 7896901EN revision : 01
A
B
B
As soon as possible insert a screwor pin A 6 mm diameter and40 mm long into the hole shownabove.Release the lever.The spring will then exert pressureon pin A instead of on the top andbottom pins B.
D
C
E
To separate the guide from thesprings:--- remove clips C andwasher D.H separate the spring guide fromring E of the crank handle.
CAUTION
Do not scratch the teflonised ring.
lefthand springs
Continue charging the operatingmechanism using the operatinglever.
The springs are compressed.
7896901EN revision : 01 33
F
As soon as possible, insert ascrew or pin F 6 mm in diameterand 40 mm long in the hole shownabove.Release the lever.The spring will then exert pressureon pin F.
J
G
H
To separate the guide from thesprings:H remove clips G and washer H.IH separate the spring guide fromring J of the crank handle.
CAUTION
Do not scratch the teflonised ring.
checking
Serial connect the three phases ofthe device and insert a bell typeindicator in the circuit.
Charge the operating mechanismuntil the end of charging click.
Keep pressing on the lever whilepulling the righthand crank handletowards you until the ratchet wheellatches.
At the same time press the closingbutton and the charging lever inorder to release the latching unit.
34 7896901EN revision : 01
Very slowly close thecircuit ---breaker using the lever.
Stop charging as soon as thelamp comes on: the arcingcontacts of the three phasesare in contact.
CAUTION
keep the lever in this position withthe bell activated.If the position is exceeded, repeatthe operation.
Red Green
Red Green
good arcing contacts
worn arcing contacts
If the poles activate the bell whenthe finder is in the red area, all3 poles must be replaced.
fitting the right and lefthandclosing springs
CAUTION
these springs can be fittedat the same time
Disconnect the testerSlowly close the circuit---breaker untilyour hear the end of charging click.
Press the push button.The device should open.
7896901EN revision : 01 35
Place the rings on the pins of theright and lefthand crank handles.
CAUTION
Do not lubricate before mounting.Do not scratch the teflonised ring.Place the right and lefthand springguides on the pins, positioningthem correclty in the pin groove.
Place the righthand crank handlering in the opening of therighthand spring guide using thecharging lever.Continue charging by correctlypositioning the spring guide in thelefthand crank handle ring groove.
A
CAUTION
Do not lubricate the teflonised ringA.
B
C
D
C
2
1
Place washers D and clips C(to the right and left).Remove the screws or pins B.Finish charging.CheckingClose then open using the “ I ” and“O ” push buttons, in order todeactivate the operating mechanism.
36 7896901EN revision : 01
lubricatingthe spring guidesclosing spring
Charge the operating mechanismby moving up and down until itclicks in place.
The circuit---breaker position indicatorremains “O ” (device open).The operating mechanism indicatormoves to the “ activated ” position.
A
The springs are compressed.H lubricate the guidesH oil the phosphatised springs
CAUTION
Do not lubricate the teflonised ringA.
WARNING
A brush must be used tolubricate.Do not disassemble the spring toperform this operation.
opening springlocal manual closingof the circuit--breaker
CAUTION
if the circuit ---breaker is equippedwith an undervoltage release(optional), the latter must beenergised in order to closethe circuit ---breaker.
Press the push button in order toclose the circuit ---breaker.
The circuit ---breaker positionindicator moves to “ I ” (deviceclosed).The operating mechanismindicator moves to the“ deactivated ” position.
7896901EN revision : 01 37
The springs are compressed.H lubricate the guidesH oil the phosphatised springs
WARNING
A brush must be used tolubricate.Do not disassemble the spring toperform this operation.
local manual openingof the circuit--breaker
Press the push button in order toopen the circuit ---breaker.
The circuit---breaker position indicatormoves to “O ” (device open).The operating mechanismindicator indicates that it isdeactivated.
operating mechanismunit
Clean the entire subassemblyOil all the phosphatised partsCheck presence of the Baumanhoops.Lubricate the pins and hinges.
WARNING
A brush must be used tolubricate.Do not disassemble the operatingmechanism to perform thisoperation.
38 7896901EN revision : 01
latching unit Clean the entire subassembly thenoil the phosphatised partsLubricate the latching units andpins.
WARNING
A brush must be used tolubricate.Do not disassemble the latchingunit to perform this operation.
gear motor Clean the entire subassemblyOil the phosphatised partsLubricate the gears.
WARNING
A brush must be used tolubricate.Do not disassemble the gearmotor to perform this operation.
7896901EN revision : 01 39
foreword Corrective maintenance operationsare designed to replace faultysubassemblies.The operations listed in thesummarising table below can beperformed by the customer or byGroupe Schneider’s After---Salesrepresentatives.For any other maintenanceoperations, please contact yournearest Groupe Schneiderservice centre.
After each operation perform theelectrical tests in accordancewith applicable standards.
CAUTION
when replacing parts, all theaccessories listed below MUST beplaced by the new equipment:-- Nylstop-- Contact washer-- Hoop-- Circlips-- Clips-- Mechanical pin
summarising tabledescription performed by comments
replacing poles =S=
replacing the GMh operating mechanism =S=
replacing keylocking =S= or Customer
replacing the closing spring =S= or Customer
replacing the releases
single closing release =S= or Customer
shunt release or single overcurrent trip device =S= or Customer
undervoltage trip device without lifter =S= or Customer
undervoltage trip device with lifter =S=
shunt release or double overcurrent trip device =S= or Customer
replacing the MITOP =S=
replacing the motor of the gear motor =S= or Customer
replacing the gear motor =S= every 10,000 operations
replacing the microswitch (SE) =S= or Customer
replacing the microswitch (SQ) =S= or Customer
replacing the end of charging contact =S= or Customer
replacing the antipumping relay =S= or Customer
replacing the 5 or 9 auxiliary contact unit =S= or Customer
replacing the operation counter =S= every 10,000 operations
actions to perform in event of a pressure switch alarm =S=
corrective maintenance
40 7896901EN revision : 01
replacing thekeylocking (optional)removing the lock
A
Release the lockRemove screws A
fitting the lock
B
A
NB:the lock is retrieved on site.The identifying label is stuckto the plate.Adjustment:Screws A not locked in place.Continue depressing the pushbutton.Close the lock with the key extracted.Check a clearance B is presentand lock screws A.
replacingthe closing springsremoval
CAUTION
as the operating mechanism has 2springs, you must mark them beforeremoval for identification purposes.
righthand springs
Very slightly charge the operatingmechanism using the operating lever.
The springs are compressed.
7896901EN revision : 01 41
A
As soon as possible, insert a screwor pin A 6 mm diameter and 40 mmlong in the hole shown above.Release the lever.The springs then exert pressureon pin A.
D
C
E
To separate the guide fromthe springs:H remove clips C and washer D.H separate the spring guide fromring E of the crank handle.
CAUTION
do not scratch the teflonised ring.
lefthand springs
Continue charging the operatingmechanism using the operating lever.
The springs are compressed.
42 7896901EN revision : 01
F
As soon as possible, insert ascrew or pin F 6 mm in diameter and40 mm long in the holeshown above.Release the lever.The springs then exert pressureon pin F.
J
G
H
To separate the guide fromthe springs:H remove clips G and washer H.H separate the spring guide fromring J of the crank handle.
CAUTION
do not scratch the teflonised ring.
fitting the right andlefthand closing springs
CAUTION
these springs can be fittedat the same time
Disconnect the testerSlowly close the circuit ---breakeruntil the end of charging click.
Press the push button.The device should open.
7896901EN revision : 01 43
Place the rings on the pins of theright and lefthand crank handles.
CAUTION
Do not lubricate before mounting.Do not scratch the teflonised ring.Place the right and lefthand springguides on the pins, positioningthem correclty in the pin groove.
Place the righthand crank handle ringin the opening of the righthand springguide using the charging lever.Continue charging by correctlypositioning the spring guide in thelefthand crank handle ring groove.
A
CAUTION
do not lubricate the teflonised ringA.
B
D
C
2
1
Place washers D and clips C(to the right and left).Remove the screws or pins B.Finish charging.checkingClose then open using the “ I ” and“O ” buttons, in order to deactivatethe operating mechanism.
44 7896901EN revision : 01
replacing a releasethe different release positions in the operating mechanism
release undervoltage shuntrelease
overcurrent top view of assembly position
single closing-
I
Front
Back
undervoltage
- II
Front
Back
singleopening - -
III IVFront
Back
Front
Back
doubleopening - -
VFront
Back
according to position Isingle closingremoval
Mark and disconnect the wires.Remove the two M6 fixing screws.Remove the release.
fitting Proceed in reverse order fromremoval.Tightening torque: 13 Nm.Position the release with itscylindrical rod facing the latchingunit.Check that the coil rod does notflange the unit crank handle in thetripped position.It should ensure that closing latchA moves to eccentric catch B.
A B
7896901EN revision : 01 45
according to position IIundervoltageremoval
Mark and disconnect the wires.Remove the two M6 fixing screws.Remove the release.
fitting
0.5 to 1 mm
Position the release in the trippedposition.Position the crank handle in thelimit stop position.There should be a clearance of 0.5to 1 mm between the crankhandle and the release.
1 mm min.
Fit the two M6 fixing screws.Tightening torque: 13 Nm.Check that there is a clearance ofat least 1 mm between thenon---operating crank handle andthe release when the magneticcircuit is closed.
according to positionIII or IVshunt releaseor overcurrentremoval
NB: the coil is mounted to the leftor right of the operatingmechanism according to theprotection type.For lefthand mounting, insert four0.5 mm washers between theoperating mechanism frame andthe coil.Mark and disconnect the wires.Remove the two M6 fixing screws.Remove the release.
fitting Proceed in reverse order fromremoval.Tightening torque: 13 Nm.Position the release with itscylindrical rod facing the latchingunit.Check that the coil rod does notflange the unit crank handle in thetripped position.It should ensure that closing latchA moves to eccentric catch B.
AB
46 7896901EN revision : 01
according to position Vshunt release orovercurrent (two coils)removal
Mark and disconnect the wires.Remove the two M6 fixing screws.Remove the release.
fitting Proceed in reverse order fromremoval.Tightening torque: 13 Nm.Position the release with its cylindricalrod facing the latching unit.Check that the coil rod does notflange the unit crank handle in thetripped position.It should ensure that closing latchA moves to eccentric catch B.
A
B
replacing the motorof the gear motorremoval
Mark and disconnect the wires.Remove the two M6 fixing screws.Remove the motor.
fitting Proceed in reverse order fromremoval.
Tightening torque: 13 Nm.
7896901EN revision : 01 47
replacinga microswitch (SE)continuous trippingremoval
Remove the screws and thelatching lug.Mark and disconnect the wires.
Remove the two fixing nuts withoutremoving the screws.Remove the microswitch withoutremoving the insulating plate.
fitting Proceed in reverse order fromremoval.
Tightening torque: 0.7 Nm.
replacing an end ofcharging contactremovalNB: removal of the lefthandclosing spring simplifies thisoperation.
A
B
C
Remove clip A and spacer B inorder to withdraw pin C.A wrench can be passed throughthe window to remove screw E.
do not disassemble
The end of charging contacts areplaced on the lefthand side surfaceof the operating mechanism.Mark and disconnect the wires.
D
Remove the two screws in order torelease contact holder D.
E
Swivel the guide in order to bringnut E up in front of the window.Remove the fixing screw.
48 7896901EN revision : 01
D
Swivel the contact.Slide holder assembly D and...
D
.... contacts upwards in order torelease it from the guide andoperating mechanism.
Remove the faulty contact.Mount the new contact on the holder.
CAUTION
only mount one screw on therighthand contact.Tightening torque: 2.8 Nm.
fitting D
Slide the holder assembly D andcontacts to the bottom of the guide.
E
Swivel the guide in front of thewindow in order to fit the fixingscrew and nut E.Tightening torque: 2.8 Nm.
7896901EN revision : 01 49
D
Put back the contact holder Dwithout tightening the bolts.
A
B
C
Fit pin C, spacer B and clips A.
checking 0,1 mm mini
0,5 à 1 mmF
Ensure that there is at least 0.1 mmbetween the pin and the guide, thenlock the screws in place.Tightening torque: 6 Nm.Check that there is a clearance of0.5 to 1 mm between the contactfinger and part F.With the operating mechanism inthe deactivated position, checkthat the contacts are not flanged.Connect the wires.
replacing anantipumping relayremoval
C
D
A
B
Mark and disconnect the wires.Relay A is fixed onto the auxiliarycontacts by strap B.Remove fixing bolt C and retrieve itfor fitting.Remove relay A and insulatingplate D.
fitting Proceed in reverse order fromremoval.
Tightening torque: 2 Nm.
50 7896901EN revision : 01
replacing an auxiliarycontact unitremoval
1
2
Auxiliary contact unit1 --- 5 contacts2 --- 9 contactsMark and disconnect the wires.
A
AC
1
2
E
B
D
For a 5---contact unit: loosen boltsA and release crank handles Band C.For a 9---contact unit: loosen bolt Dand release crank handle E.
F
Identify contact location using holeF in order to put the new unit backinto the same position.
1
G
Remove bolts G which must beretrieved for fitting.Remove the unit to be replaced 1or 2.
fitting Proceed in reverse order fromremoval.
Bolt tightening torque:A and D : 10 Nm.G : 2 Nm.
7896901EN revision : 01 51
SF6 gas recoveryconformity rules
The SF6 must be removed beforeany dismantling operation can becarried out in compliance with theprocedures described inIEC---61634 and accordiing to thefollowing instructions.The gas must be treated incompliance with IEC---60480.
intervention method
Tool necessary for the operation
A
Unscrew the plug (A).
Plug dismounted. Vacuum/filling device connected.
Wait until the pressure guageshows 0 (15 min to empty thetank) before removing theconnection.
52 7896901EN revision : 01
problems, probablecauses and theirsolutions
The information listed belowensures minimum operatingdowntimes.
If the solutions proposed are noteffective, you should contact yournearest Groupe Schneiderservice centre.
symptoms faulty components probable causes andsolutions
Impossible to charge Electrical operating mechanism:motor
Insufficient voltage at motorterminals:H restore voltageH replace motor if necessary
End of charging contact H check contact stateH replace it if necessary
Wiring H check auxiliary circuitconnections
Circuit--breaker will not closethe indicator remains in the openposition
Undervoltage tripping The coil is not suppliedH supply the release or keep itartifically in the “ closed cirucit ”position (e.g. by using an elasticband).
Closing release The release is incorrectly connectedH check the circuitThe winding is cutH replace the release
Charging device The operating mechanism is notchargedH charge the operatingmechanism
The circuit--breaker closes andopens immediately, thenremains open although theclosing order is maintained.
All opening releases Fault on the main MV circuit orincorrect adjustment of theprotection circuitsH remove the faultH adjust the protection circuits
The circuit--breaker opens andcloses in turn.
Antipumping relay or directreleases
H replace the relayH readjust
The circuit--breaker does notopen manually or by remotecontrol
Operating mechanism orcircuit ---breaker
Hard spot on operatingmechanism or circuit ---breakerH finish charging the operatingmechanism with the manualcharging handle.Alert the Groupe Schneiderservice centre.
Opening release The release is incorrectly connectedH check the circuitThe winding is cutH replace the releaseH check the protection circuit.
group Schneider Electric servicecenters are there for:
engineering and technicalassistancestart-uptrainingpreventive and correctivemaintenanceadaptation workspare parts
Call your sales representativewho will put you in touch withyour nearest group SchneiderElectric service centers.
Conception, rédaction: Service DocumentationTechnique T&D
Edition du : 14/04/20087896901EN revision : 01
As standards, specifications and designs change from timeto time, please ask for confirmation of the information givenin this publication.
Schneider Electric Industries SAS
89, boulevard Franklin RooseveltF---92500 Rueil---Malmaison (France)Tel : +33 (0)1 41 29 85 00
http://www.schneider---electric.com