CERTIFICATE OF APPROVAL No CF 5531

This certificate is the property of Exova (UK) Limited trading as Warrington Certification Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

Signed and sealed for and on behalf of Exova (UK) Limited trading as Warrington Certification

Paul Duggan Certification Manager

CERTIFICATE OF APPROVAL No CF 5531

This is to certify that, in accordance with

TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of

1

of 32

D. P. GARG & CO. PVT. LTD

B-210 B,Phase – 2 Gautam Budh Nagar Noida-201305 (U.P) India +91 120 2460085/86/97

Have been assessed against the requirements of the Technical Schedule(s)

denoted below and are approved for use subject to the conditions appended hereto:

_____________________________________________________________________________________________________

CERTIFIED PRODUCT TECHNICAL SCHEDULE Range of Tubular Latches, and Mortice Locks and Latches

TS23 The Contribution of Locks and Latches to The Performance of Fire Resisting Doorsets

Issued: 2nd May 2017 Revised: 17th September 2018 Next audit test due: 01/05/2018 Frequency: Annually Valid to: 1st May 2022

This certificate is the property of Exova (UK) Limited trading as Warrington Certification

Reg. Office: Exova (UK) Limited, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Co. Reg. No. SC070429

CERTIFICATE No CF 5531 D. P. GARG & CO. PVT. LTD

of 32 Signed R/001

Issued: 2nd May 2017 Revised: 17th September 2018 Valid to: 1st May 2022

D. P. Garg - Tubular Latches and Mortice Locks and Latches 1. The tubular latches, and mortice locks and latches covered by this certificate are all steel

cased. The approval applies to the products identified in Annex A, B and C.

The range consists of tubular latches and mortice locks, lever locks and cylinder locks. All are manufactured with mild steel bodies with mild steel or stainless steel forends and strikeplates. The range is available with latchbolts of cast zinc or brass, and deadbolts of cast zinc, brass and mild steel. The followers are of either cast zinc or brass. The mortice locks and latches have a forends that vary from 20 mm to 26.5 mm wide, and 58 mm to 235 mm high which are available square or radiused. The cases are all 15 mm wide.

2. This approval relates to their use with the following door assemblies:-

Tubular latches in Annex A - Latched and unlatched, intumescent sealed door assemblies consisting of timber faced and edged leaves with timber, cellulosic or mineral cores in timber frames having a fire resistance up to 60 minutes (Code ITT). Mortice locks and latches in Annex B - Latched and unlatched, intumescent sealed door assemblies consisting of timber faced and edged leaves with timber, cellulosic or mineral cores in timber frames having a fire resistance up to 60 minutes (Code ITT). Mortice locks and latches in Annex C only - Latched and unlatched, intumescent sealed door assemblies consisting of timber faced and edged leaves with timber, cellulosic or mineral cores in timber frames having a fire resistance up to 120 minutes (Code ITT).

Mortice locks and latches in Annex C only - Latched and unlatched, door assemblies consisting of uninsulated or insulated metal door assemblies in metal frames with or without intumescent seals having a fire resistance up to 240 minutes (Code IMM/MM).

3. This certificate is designed specifically to demonstrate compliance of the product or system with Approved Document B (England and Wales); the Technical Handbooks (Scotland); Technical Booklet E (N. Ireland). If compliance is required with other regulatory or guidance documents there may be additional considerations or conflicts to be taken into account.

4. This approval relates to the use of the above locks/latches in contributing to the fire

resistance performance of timber based doorsets and metallic based doorsets, as defined in BS EN 1634-1 or BS 476: Part 22: 1987.




of 32 Signed R/001


D. P. Garg - Tubular Latches and Mortice Locks and Latches

5. The locks are approved on the basis of: i) Initial type testing to EN 1634-1 and EN 12209 ii) An appraisal against TS23 iii) Certification of quality management system to ISO 9001. iv) Inspection and surveillance of factory production control v) On-going audit testing in accordance with TS23 requirements

6. The mortice locks and/or latches should only be used with door assemblies of proven fire

resistance (as defined in BS EN 1634-1 or BS 476: Part 22: 1987), the critical aspects of the doorset construction are considered to be the material of the door frame, the leaf to frame clearance gaps and the lipping material. Attention should be paid to these details and these should not be amended from that previously fire tested. The following minimum specification shall be followed: Timber-based assemblies (Code ITT30 and ITT60): i) Door frame density - 450 kg/m³ (30 minutes), 640 kg/m3 (60 minutes) ii) Door leaves shall have a minimum thickness of 44 mm for 30 minute applications

and 54 mm for 60 minute applications. iii) Lipping density - 640 kg/m3.

Steel-based assemblies (Code MM/IMM) i) Door leaves shall have a minimum thickness of 44 mm for up to 240 minute

applications. ii) No additional intumescent protection is required.

7. When fitted to insulated ITT 30 or ITT60 timber or mineral composite door assemblies,

the required intumescent protection shall be as follows: i) The required protection for 30 minute ITT applications will be 1 mm of mono

ammonium phosphate or graphite intumescent sheet material, around the lock case and behind the forend and strike plate.

ii) The required protection for 60 minute ITT applications will be 2 mm of mono ammonium phosphate or graphite intumescent sheet material, around the lock case and behind the forend and strike plate and base of any backbox.

iii) Additionally for 60 minute applications, the perimeter intumescent fire seal within the frame/door edge shall by-pass the strike plate or forend by a minimum of 7.5 mm wide on each side (with the exception of the latchbolt lip where present).

Note: Failure to install this protection will invalidate this certificate




of 32 Signed R/001



8. Timber/mineral-based assemblies (Code ITT 90 and ITT120) D. P. Garg locks and latches in Annex C shall only be fitted in 90 and 120 minute doorsets which have previously been tested with locks/latches of a similar size and specification, subject to the following requirements:

i. The required intumescent protection shall be as tested by the chosen door manufacturer. In all cases this shall be a minimum of a 2 mm thick mono ammonium phosphate or graphite intumescent sheet material incorporated around the lock case and a bedding of the same type and thickness of mono ammonium phosphate or graphite material behind the forend and strike plate/keep, however, this protection shall be increased as required based on the chosen doorset manufacturers test data.

ii. Additionally the perimeter intumescent within the frame/door edge shall by-pass the strike plate or forend by a minimum of 7.5 mm wide on each side (with the exception of the latchbolt lead where present). Where the perimeter intumescent fire seal on the original test for the chosen doorset by-passes the locks/strikeplate by more than 7.5 mm, this shall be maintained on the doorset incorporating the D.P. Garg chosen products.

iii. Where chosen doorsets are approved in latched configurations only, the chosen doorset shall have been tested with a minimum latchbolt of 11.5 mm and a maximum latch bolt throw of 13 mm.

iv. Where cylinders are required the chosen doorset shall have been successfully tested with single or double cylinders as required.

v. The chosen doorset shall have been successfully tested with a lock/latch of the following minimum size:

Component/dimension minimum Size (mm)

Basic lockcase Forend width 22 Forend Height 235 Forend thickness 2.5 Case height 170 Case width 74 Case thickness 15 Strike plate Strike plate width 24 (exc. Lip) Strike plate height 212 Strike plate thickness 1.2 Strike plate lip height 49




of 32 Signed R/001


D. P. Garg - Tubular Latches and Mortice Locks and Latches 8. Timber/mineral-based assemblies (Code ITT 90 and ITT120) – Continued

vi. The D. P. Garg locks and latches are available in arrange of latchbolt and deadbolt materials, the following restrictions shall therefore apply:

Tested bolt material on Proposed Doorset

Permitted D. P. Garg Bolt Material

Zinc Zinc, Brass or Steel Brass Brass or Steel Steel Steel

9. The mortice locks and/or latches and their associated strikeplates and keeps may only be

fitted in the manner described in this certificate and subject to any limitations on the inclusion of locks/latches specified for the door leaf. This approval is applicable only to the specified locks used with door assemblies of proven fire resistance (as defined in BS EN 1634-1) and when using appropriate intumescent protection.

10. Lock assemblies not incorporating a latching mechanism shall only be fitted to proven

unlatched door assemblies. 11. The locks/latches should not be fitted higher than 1100 mm from the spindle to the

finished floor level of the surrounding floors.

12. Timber doorsets shall be installed in accordance with BS 8214. 13. The approval relates to on-going production. Product and/or its immediate packaging is

identified with the manufacturer’s name, the product name or number, the CERTIFIRE name or name and mark, together with the CERTIFIRE certificate number and application where appropriate.

14. The products identified within this certificate/assessment report are marketed under the

brand names of GARG, GARGS, TUFF, ELITE, SICHERN, BASIC, BASICS, ESSENTIAL, JUPITER, MARS, EXCEL, FIRESTOP, UNIFIX, SHIELD, I-CE, CENTURION, ASEC VITAL, TUFFITE, ASEC, EUROSTAR, XL and ECLIPSE. In all case the products are identical with only branding and packaging changing.




of 32 Signed R/001


D. P. Garg - Tubular Latches and Mortice Locks and Latches 14a. The following table shows the acceptable doorset types and fire resistance periods for

tubular latches in Annex A:

Approved Door Type Class IMM MM ITT ITM ITC FD20 FD30 FD60 * FD90 FD120 FD240 E 20 EI 20 E 30 EI 30 E 60 * EI 60 * E 90 EI 90 E 120 EI 120 E 240 EI 240

Key: - approved

- Not approved

* - see specific restrictions in Annex A




of 32 Signed R/001


D. P. Garg – Tubular Latches and Mortice Locks and Latches 14b. The following table shows the acceptable doorset types and fire resistance periods for

mortice locks and latches in Annex B:

Approved Door Type Class IMM MM ITT ITM ITC FD20 FD30 FD60 FD90 FD120 FD240 E 20 EI 20 E 30 EI 30 E 60 EI 60 E 90 EI 90 E 120 EI 120 E 240 EI 240

Key: - approved

- Not approved




of 32 Signed R/001


D. P. Garg – Tubular Latches and Mortice Locks and Latches 14c. The following table shows the acceptable doorset types and fire resistance periods for

mortice locks and latches in Annex C:

Approved Door Type Class IMM MM ITT ITM ITC FD20 FD30 FD60 FD90 FD120 FD240 E 20 EI 20 E 30 EI 30 E 60 EI 60 E 90 EI 90 E 120 EI 120 E 240 EI 240

Key: - approved

- Not approved




of 32 Signed R/001


D. P. Garg - Tubular Latches and Mortice Locks and Latches 15. Doors are classified as the following types:

Type MM - 20 minute to 240 minute doorsets that consist of metallic leaves in metallic frames that do not contain intumescent materials in the frame to leaf gap.

Type IMM - 20 minute to 240 minute doorsets that consist of metallic leaves in metallic frames that contain intumescent materials in the frame to leaf gap. Type ITT - 20 minute to 120 minute doorsets containing intumescent seals and consisting of non-metallic faced and edged leaves hung in timber frames

Type ITM - 20 minute to 120 minute doorsets containing intumescent seals and consisting of non-metallic faced and edged leaves hung in metal frames.

Type ITC - 20 minute to 120 minute doorsets containing intumescent seals and consisting of non-metallic faced and edged leaves hung in proprietary composite frames, of which the principal material is other than timber or metal but which may include any other materials.

16. Approved lock/latch models and classifications.

• Tubular Latch – Drawing DL01 & DL02:

NPD M 4 1 0 F - B 0 1 0

• Tubular Latch – Drawing DL03 & DL04:

1 M 4 1 0 F - B 0 1 0

• 3 lever mortice sashlock – Drawing DL05:

1 M 4 1 0 F 2 K D 1 A

• 3 lever mortice latch – Drawing DL05:

1 M 4 1 0 F 2 K 0 1 0

• 3 lever deadlock – Drawing DL05:

1 M 4 1 0 F 2 K D 0 A




of 32 Signed R/001


D. P. Garg - Tubular Latches and Mortice Locks and Latches 16. Approved lock/latch models and classifications – Continued.

• 3 lever bathroom lock – Drawing DL06:

1 M 4 1 0 F - B G 1 0

• 5 lever mortice sashlock – Drawing DL07:

2 M 4 1 0 F 3 K D 1 A

• 5 lever mortice latch – Drawing DL07:

2 M 4 1 0 F - B 0 1 0

• 5 lever deadlock – Drawing DL08:

2 M 4 1 0 F 3 K D 0 A

• Cylinder mortice sashlock – Drawing DL09:

2 M 4 1 0 F 2 B A 1 0

• Cylinder mortice latch – Drawing DL09:

2 M 4 1 0 F 2 B 0 1 0

• Cylinder deadlock – Drawing DL09:

2 M 4 1 0 F 2 B A 0 0


2 M 4 1 0 F 2 B A 0 0


2 M 4 1 0 F 2 B C 0 0




of 32 Signed R/001




2 M 4 1 0 F 2 B C 1 0


2 M 4 1 0 F - B C 1 0


2 M 4 1 0 F 2 B C 0 0

• Bathroom lock – Drawing DL015:

2 M 4 1 0 F 0 B G 1 0

• Bathroom lock – Drawing DL015a:

2 M 4 1 0 F 0 B G 1 0


2 M 4 1 0 F 2 B C 1 0


2 M 4 1 0 F - B C 1 0


2 M 4 1 0 F 2 B C 0 0


2 M 4 1 0 F 2 B C 1 0




of 32 Signed R/001




2 M 4 1 0 F 2 B C 0 0


2 M 4 1 0 F 2 B C 1 0


2 M 4 1 0 F 2 B C 0 0


2 M 4 1 0 F 2 B C 1 0


2 M 4 1 0 F 2 B C 0 0

• 3 lever mortice deadlock – Drawing DL21:

1 M 4 1 0 F 2 K D 0 A Further Information

Further information regarding the details contained in this certificate may be obtained from D. P. Garg & Co. Pvt. Ltd (Tel: +91 120 2460085/86/97). Further information regarding CERTIFIRE certification and other approved products can be obtained from CERTIFIRE (Tel: 01925 646777).




of 32 Signed R/001



ANNEX A – TUBULAR LATCHES SUITABLE FOR USE ON TIMBER/MINERAL-BASED DOORSETS FOR UP TO 60 MINUTES

CODE PRODUCT LATCH BOLT

DEAD BOLT

FACE PLATE BODY FOLLOWER

DRAWING No.

LAL0071* Tubular Latch Zinc N/A MS MS Zinc DL01 LAL0072* Tubular Latch Zinc N/A MS MS Zinc DL01 LAL0073* Tubular Latch Zinc N/A MS MS Zinc DL01 LAL0074* Tubular Latch Zinc N/A MS MS Zinc DL01 LAL0081* Tubular Latch Bolt Thru Zinc N/A MS MS Zinc DL02 LAL0082* Tubular Latch Bolt Thru Zinc N/A MS MS Zinc DL02 LAL0083* Tubular Latch Bolt Thru Zinc N/A MS MS Zinc DL02 LAL0084* Tubular Latch Bolt Thru Zinc N/A MS MS Zinc DL02 LAL0076* Tubular Latch Rc Zinc N/A MS MS Zinc DL01 LAL0077* Tubular Latch Rc Zinc N/A MS MS Zinc DL01 LAL0078* Tubular Latch Rc Zinc N/A MS MS Zinc DL01 LAL0079* Tubular Latch Rc Zinc N/A MS MS Zinc DL01 LAL0086* Tubular Latch Bolt Thru Rc Zinc N/A MS MS Zinc DL02 LAL0087* Tubular Latch Bolt Thru Rc Zinc N/A MS MS Zinc DL02 LAL0088* Tubular Latch Bolt Thru Rc Zinc N/A MS MS Zinc DL02 LAL0089* Tubular Latch Bolt Thru Rc Zinc N/A MS MS Zinc DL02 LAL0131 Arch Tubular Latch Brass N/A MS MS Zinc DL03 LAL0132 Arch Tubular Latch Brass N/A MS MS Zinc DL03 LAL0133 Arch Tubular Latch Brass N/A MS MS Zinc DL04 LAL0134 Arch Tubular Latch Brass N/A MS MS Zinc DL04 LAL0137 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL03 LAL0138 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL04 LAL0139 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL04 LAL0141 Arch Tubular Latch R/C Brass N/A MS MS Zinc DL03 LAL0142 Arch Tubular Latch R/C Brass N/A MS MS Zinc DL03 LAL0143 Arch Tubular Latch R/C Brass N/A MS MS Zinc DL04 LAL0144 Arch Tubular Latch R/C Brass N/A MS MS Zinc DL04 LAL0147 Arch Tubular Latch Bolt Thru R/C Brass N/A MS MS Zinc DL03 LAL0148 Arch Tubular Latch Bolt Thru R/C Brass N/A MS MS Zinc DL04 LAL0149 Arch Tubular Latch Bolt Thru R/C Brass N/A MS MS Zinc DL04 LAL0231 Arch Tubular Latch Brass N/A MS MS Zinc DL03 LAL0232 Arch Tubular Latch Brass N/A MS MS Zinc DL03 LAL0233 Arch Tubular Latch Brass N/A MS MS Zinc DL04 LAL0234 Arch Tubular Latch Brass N/A MS MS Zinc DL04 LAL0237 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL03 LAL0238 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL04 LAL0239 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL04 LAL0151 Arch Tubular Latch Brass N/A MS MS Zinc DL03 LAL0152 Arch Tubular Latch Brass N/A MS MS Zinc DL03 LAL0153 Arch Tubular Latch Brass N/A MS MS Zinc DL04 LAL0154 Arch Tubular Latch Brass N/A MS MS Zinc DL04 LAL0157 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL03

* Note: Limited to 30 minutes approval only




of 32 Signed R/001



ANNEX A – TUBULAR LATCHES SUITABLE FOR USE ON TIMBER/MINERAL-BASED DOORSETS FOR UP TO 60 MINUTES


DEAD BOLT

FACE PLATE BODY FOLLOWER

DRAWING No.

LAL0158 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL04 LAL0159 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL04 LAL0161 Arch Tubular Latch R/C Brass N/A MS MS Zinc DL03 LAL0162 Arch Tubular Latch R/C Brass N/A MS MS Zinc DL03 LAL0163 Arch Tubular Latch R/C Brass N/A MS MS Zinc DL04 LAL0164 Arch Tubular Latch R/C Brass N/A MS MS Zinc DL04 LAL0167 Arch Tubular Latch Bolt Thru R/C Brass N/A MS MS Zinc DL03 LAL0168 Arch Tubular Latch Bolt Thru R/C Brass N/A MS MS Zinc DL04 LAL0169 Arch Tubular Latch Bolt Thru R/C Brass N/A MS MS Zinc DL04 LAL0241 Arch Tubular Latch Brass N/A MS MS Zinc DL03 LAL0242 Arch Tubular Latch Brass N/A MS MS Zinc DL03 LAL0243 Arch Tubular Latch Brass N/A MS MS Zinc DL04 LAL0244 Arch Tubular Latch Brass N/A MS MS Zinc DL04 LAL0247 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL03 LAL0248 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL04 LAL0249 Arch Tubular Latch Bolt Thru Brass N/A MS MS Zinc DL04




of 32 Signed R/001



ANNEX B – MORTICE LOCK AND LATCHES SUITABLE FOR USE ON TIMBER/MINERAL-BASED DOORSETS FOR UP TO 60 MINUTES


DEAD BOLT

FACE PLATE BODY FOLLOWER DRAWING

No. LAL1440 3 Lvr Mortice Sash Lock T-3 Zinc Zinc MS MS Zinc DL05 LAL1441 3 Lvr Mortice Sash Lock T-3 Zinc Zinc MS MS Zinc DL05 LAL1442 3 Lvr Mortice Sash Lock T-3 Zinc Zinc MS MS Zinc DL05 LAL1444 3 Lvr Mortice Sash Lock T-3 R/C Zinc Zinc MS MS Zinc DL05 LAL1445 3 Lvr Mortice Sash Lock T-3 R/C Zinc Zinc MS MS Zinc DL05 LAL1446 3 Lvr Mortice Sash Lock T-3 R/C Zinc Zinc MS MS Zinc DL05 LAL1449 3 Lvr Mortice Sash Lock T-3 Zinc Zinc MS MS Zinc DL05 LAL1450 3 Lvr Mortice Sash Lock T-3 Zinc Zinc MS MS Zinc DL05 LAL1451 3 Lvr Mortice Sash Lock T-3 Zinc Zinc MS MS Zinc DL05 LAL1453 3 Lvr Mortice Sash Lock T-3 R/C Zinc Zinc MS MS Zinc DL05 LAL1454 3 Lvr Mortice Sash Lock T-3 R/C Zinc Zinc MS MS Zinc DL05 LAL1455 3 Lvr Mortice Sash Lock T-3 R/C Zinc Zinc MS MS Zinc DL05 LAL1465 3 Lvr Mortice Latch Only T-3 Zinc N/A MS MS Zinc DL05 LAL1466 3 Lvr Mortice Latch Only T-3 Zinc N/A MS MS Zinc DL05 LAL1467 3 Lvr Mortice Latch Only T-3 Zinc N/A MS MS Zinc DL05 LAL1468 3 Lvr Mortice Latch Only T-3 R/C Zinc N/A MS MS Zinc DL05 LAL1470 3 Lvr Mortice Latch Only T-3 R/C Zinc N/A MS MS Zinc DL05 LAL1471 3 Lvr Mortice Latch Only T-3 R/C Zinc N/A MS MS Zinc DL05 LAL1473 3 Lvr Mortice Latch Only T-3 Zinc N/A MS MS Zinc DL05 LAL1474 3 Lvr Mortice Latch Only T-3 Zinc N/A MS MS Zinc DL05 LAL1475 3 Lvr Mortice Latch Only T-3 Zinc N/A MS MS Zinc DL05 LAL1476 3 Lvr Mortice Latch Only T-3 R/C Zinc N/A MS MS Zinc DL05 LAL1477 3 Lvr Mortice Latch Only T-3 R/C Zinc N/A MS MS Zinc DL05 LAL1478 3 Lvr Mortice Latch Only T-3 R/C Zinc N/A MS MS Zinc DL05 LAL1486 3 Lvr Mortice Dead Bolt T-3 N/A Zinc MS MS N/A DL05 LAL1487 3 Lvr Mortice Dead Bolt T-3 N/A Zinc MS MS N/A DL05 LAL1488 3 Lvr Mortice Dead Bolt T-3 N/A Zinc MS MS N/A DL05 LAL1489 3 Lvr Mortice Dead Bolt T-3 R/C N/A Zinc MS MS N/A DL05 LAL1490 3 Lvr Mortice Dead Bolt T-3 R/C N/A Zinc MS MS N/A DL05 LAL1491 3 Lvr Mortice Dead Bolt T-3 R/C N/A Zinc MS MS N/A DL05 LAL1492 3 Lvr Mortice Dead Bolt T-3 N/A Zinc MS MS N/A DL05 LAL1493 3 Lvr Mortice Dead Bolt T-3 N/A Zinc MS MS N/A DL05 LAL1494 3 Lvr Mortice Dead Bolt T-3 N/A Zinc MS MS N/A DL05 LAL1495 3 Lvr Mortice Dead Bolt T-3 R/C N/A Zinc MS MS N/A DL05 LAL1496 3 Lvr Mortice Dead Bolt T-3 R/C N/A Zinc MS MS N/A DL05 LAL1497 3 Lvr Mortice Dead Bolt T-3 R/C N/A Zinc MS MS N/A DL05 LAL1416 3 Lvr Bathroom Lock T-3 Zinc Zinc MS MS Zinc DL06 LAL1417 3 Lvr Bathroom Lock T-3 Zinc Zinc MS MS Zinc DL06 LAL1419 3 Lvr Bathroom Lock T-3 R/C Zinc Zinc MS MS Zinc DL06 LAL1420 3 Lvr Bathroom Lock T-3 R/C Zinc Zinc MS MS Zinc DL06 LAL1422 3 Lvr Bathroom Lock T-3 Zinc Zinc MS MS Zinc DL06 LAL1423 3 Lvr Bathroom Lock T-3 Zinc Zinc MS MS Zinc DL06 LAL1425 3 Lvr Bathroom Lock T-3 R/C Zinc Zinc MS MS Zinc DL06 LAL1426 3 Lvr Bathroom Lock T-3 R/C Zinc Zinc MS MS Zinc DL06




of 32 Signed R/001





DEAD BOLT


No. LAL1508 5 Lvr Mortice Sash Lock Brass Brass MS MS Brass DL07 LAL1509 5 Lvr Mortice Sash Lock Brass Brass MS MS Brass DL07 LAL1510 5 Lvr Mortice Sash Lock R/C Brass Brass MS MS Brass DL07 LAL1511 5 Lvr Mortice Sash Lock R/C Brass Brass MS MS Brass DL07 LAL1512 5 Lvr Mortice Sash Lock Brass Brass MS MS Brass DL07 LAL1513 5 Lvr Mortice Sash Lock Brass Brass MS MS Brass DL07 LAL1514 5 Lvr Mortice Sash Lock R/C Brass Brass MS MS Brass DL07 LAL1515 5 Lvr Mortice Sash Lock R/C Brass Brass MS MS Brass DL07 LAL1524 5 Lvr Mortice Latch Only Brass Brass MS MS Brass DL07 LAL1525 5 Lvr Mortice Latch Only Brass Brass MS MS Brass DL07 LAL1526 5 Lvr Mortice Latch Only R/C Brass Brass MS MS Brass DL07 LAL1527 5 Lvr Mortice Latch Only R/C Brass Brass MS MS Brass DL07 LAL1528 5 Lvr Mortice Latch Only Brass Brass MS MS Brass DL07 LAL1529 5 Lvr Mortice Latch Only Brass Brass MS MS Brass DL07 LAL1530 5 Lvr Mortice Latch Only R/C Brass Brass MS MS Brass DL07 LAL1531 5 Lvr Mortice Latch Only R/C Brass Brass MS MS Brass DL07 LAL1540 5 Lvr Mortice Dead Lock N/A Brass MS MS N/A DL08 LAL1541 5 Lvr Mortice Dead Lock N/A Brass MS MS N/A DL08 LAL1542 5 Lvr Mortice Dead Lock R/C N/A Brass MS MS N/A DL08 LAL1543 5 Lvr Mortice Dead Lock R/C N/A Brass MS MS N/A DL08 LAL1544 5 Lvr Mortice Dead Lock N/A Brass MS MS N/A DL08 LAL1545 5 Lvr Mortice Dead Lock N/A Brass MS MS N/A DL08 LAL1546 5 Lvr Mortice Dead Lock R/C N/A Brass MS MS N/A DL08 LAL1547 5 Lvr Mortice Dead Lock R/C N/A Brass MS MS N/A DL08 LAL5005 Euro Cylinder Sash Lock Body Arch. Brass Brass MS MS Brass DL09 LAL5006 Euro Cylinder Sash Lock Body Arch. Brass Brass MS MS Brass DL09

LAL5007 Euro Cylinder Sash Lock Body Arch. R/C Brass Brass MS MS Brass DL09


LAL5009 Euro Cylinder Sash Lock Body Arch. Brass Brass MS MS Brass DL09 LAL5010 Euro Cylinder Sash Lock Body Arch. Brass Brass MS MS Brass DL09



LAL5017 Euro Cylinder Sash Lock Body -Latch Arch. Brass N/A MS MS Brass DL09


LAL5019 Euro Cylinder Sash Lock Body -Latch Arch. R/C Brass N/A MS MS Brass DL09






of 32 Signed R/001





DEAD BOLT


No.




LAL5029 Euro Cylinder Sash Dead Bolt Arch. N/A Brass MS MS N/A DL09 LAL5030 Euro Cylinder Sash Dead Bolt Arch. N/A Brass MS MS N/A DL09 LAL5031 Euro Cylinder Sash Dead Bolt Arch.R/C N/A Brass MS MS N/A DL09 LAL5032 Euro Cylinder Sash Dead Bolt Arch.R/C N/A Brass MS MS N/A DL09 LAL5033 Euro Cylinder Sash Dead Bolt Arch. N/A Brass MS MS N/A DL09 LAL5034 Euro Cylinder Sash Dead Bolt Arch. N/A Brass MS MS N/A DL09

LAL5035 Euro Cylinder Sash Dead Bolt Arch. R/C N/A Brass MS MS N/A DL09

LAL5036 Euro Cylinder Sash Dead Bolt Arch. R/C N/A Brass MS MS N/A DL09

LAL5055 Oval Cylinder Sash Lock Body Arch. Brass Brass MS MS Brass DL09 LAL5056 Oval Cylinder Sash Lock Body Arch. Brass Brass MS MS Brass DL09

LAL5057 Oval Cylinder Sash Lock Body Arch. R/C Brass Brass MS MS Brass DL09


LAL5059 Oval Cylinder Sash Lock Body Arch. Brass Brass MS MS Brass DL09 LAL5060 Oval Cylinder Sash Lock Body Arch. Brass Brass MS MS Brass DL09



LAL5067 Oval Cylinder Sash Lock Body -Latch Arch. Brass N/A MS MS Brass DL09


LAL5069 Oval Cylinder Sash Lock Body -Latch Arch. R/C Brass N/A MS MS Brass DL09






LAL5079 Oval Cylinder Sash Dead Bolt Arch. N/A Brass MS MS N/A DL09 LAL5080 Oval Cylinder Sash Dead Bolt Arch. N/A Brass MS MS N/A DL09 LAL5081 Oval Cylinder Sash Dead Bolt Arch.R/C N/A Brass MS MS N/A DL09 LAL5082 Oval Cylinder Sash Dead Bolt Arch.R/C N/A Brass MS MS N/A DL09 LAL5083 Oval Cylinder Sash Dead Bolt Arch. N/A Brass MS MS N/A DL09




of 32 Signed R/001





DEAD BOLT


No. LAL5084 Oval Cylinder Sash Dead Bolt Arch. N/A Brass MS MS N/A DL09

LAL5085 Oval Cylinder Sash Dead Bolt Arch. R/C N/A Brass MS MS N/A DL09

LAL5086 Oval Cylinder Sash Dead Bolt Arch. R/C N/A Brass MS MS N/A DL09

LAL5105 Euro Cylinder Dead Lock N/A Brass MS MS N/A DL10 LAL5106 Euro Cylinder Dead Lock N/A Brass MS MS N/A DL10 LAL5107 Euro Cylinder Dead Lock R/C N/A Brass MS MS N/A DL10 LAL5108 Euro Cylinder Dead Lock R/C N/A Brass MS MS N/A DL10 LAL5109 Euro Cylinder Dead Lock N/A Brass MS MS N/A DL10 LAL5110 Euro Cylinder Dead Lock N/A Brass MS MS N/A DL10 LAL5111 Euro Cylinder Dead Lock R/C N/A Brass MS MS N/A DL10 LAL5112 Euro Cylinder Dead Lock R/C N/A Brass MS MS N/A DL10 LAL5117 Oval Cylinder Dead Lock N/A Brass MS MS N/A DL10 LAL5118 Oval Cylinder Dead Lock N/A Brass MS MS N/A DL10 LAL5119 Oval Cylinder Dead Lock R/C N/A Brass MS MS N/A DL10 LAL5120 Oval Cylinder Dead Lock R/C N/A Brass MS MS N/A DL10 LAL5121 Oval Cylinder Dead Lock N/A Brass MS MS N/A DL10 LAL5122 Oval Cylinder Dead Lock N/A Brass MS MS N/A DL10 LAL5123 Oval Cylinder Dead Lock R/C N/A Brass MS MS N/A DL10 LAL5124 Oval Cylinder Dead Lock R/C N/A Brass MS MS N/A DL10 LAL5153 Euro Profile Dead Lock N/A Brass MS MS N/A DL11 LAL5154 Euro Profile Dead Lock R/C N/A Brass MS MS N/A DL11 LAL5155 Euro Profile Dead Lock N/A Brass MS MS N/A DL11 LAL5156 Euro Profile Dead Lock R/C N/A Brass MS MS N/A DL11 LAL5159 Euro Profile Dead Lock 4 Bullet N/A MS MS MS N/A DL11 LAL5160 Euro Profile Dead Lock 4 Bullet R/C N/A MS MS MS N/A DL11 LAL5161 Euro Profile Dead Lock 4 Bullet N/A MS MS MS N/A DL11 LAL5162 Euro Profile Dead Lock 4 Bullet R/C N/A MS MS MS N/A DL11 LAL5165 Euro Profile Dead Lock Tripin N/A Brass MS MS N/A DL11 LAL5166 Euro Profile Dead Lock Tripin R/C N/A Brass MS MS N/A DL11 LAL5167 Euro Profile Dead Lock Tripin N/A Brass MS MS N/A DL11 LAL5168 Euro Profile Dead Lock Tripin R/C N/A Brass MS MS N/A DL11

LAL5171 Euro Profile Dead Lock 2 Bullet 1 Bolt N/A MS + Brass MS MS N/A DL11

LAL5172 Euro Profile Dead Lock 2 Bullet 1 Bolt R/C N/A MS +

Brass MS MS N/A DL11

LAL5173 Euro Profile Dead Lock 2 Bullet 1 Bolt N/A MS + Brass MS MS N/A DL11

LAL5174 Euro Profile Dead Lock 2 Bullet 1 Bolt R/C N/A MS +


LAL5178 Oval Profile Dead Lock N/A Brass MS MS N/A DL11 LAL5179 Oval Profile Dead Lock R/C N/A Brass MS MS N/A DL11 LAL5180 Oval Profile Dead Lock N/A Brass MS MS N/A DL11 LAL5181 Oval Profile Dead Lock R/C N/A Brass MS MS N/A DL11 LAL5184 Oval Profile Dead Lock 4 Bullet N/A MS MS MS N/A DL11




of 32 Signed R/001





DEAD BOLT


No. LAL5185 Oval Profile Dead Lock 4 Bullet R/C N/A MS MS MS N/A DL11 LAL5186 Oval Profile Dead Lock 4 Bullet N/A MS MS MS N/A DL11 LAL5187 Oval Profile Dead Lock 4 Bullet R/C N/A MS MS MS N/A DL11 LAL5190 Oval Profile Dead Lock Tripin N/A Brass MS MS N/A DL11 LAL5191 Oval Profile Dead Lock Tripin R/C N/A Brass MS MS N/A DL11 LAL5192 Oval Profile Dead Lock Tripin N/A Brass MS MS N/A DL11 LAL5193 Oval Profile Dead Lock Tripin R/C N/A Brass MS MS N/A DL11

LAL5195 Oval Profile Dead Lock 2 Bullet 1 Bolt N/A MS + Brass MS MS N/A DL11

LAL5196 Oval Profile Dead Lock 2 Bullet 1 Bolt R/C N/A MS +


LAL5197 Oval Profile Dead Lock 2 Bullet 1 Bolt N/A MS + Brass MS MS N/A DL11

LAL5198 Oval Profile Dead Lock 2 Bullet 1 Bolt R/C N/A MS +


LAL3203 Euro Profile Lock Body Brass Brass Ss MS Brass DL16 LAL3204 Euro Profile Lock Body R/C Brass Brass Ss MS Brass DL16 LAL3205 Euro Profile Lock Body Brass Brass Ss MS Brass DL16 LAL3206 Euro Profile Lock Body R/C Brass Brass Ss MS Brass DL16

LAL3209 Euro Profile Lock Body Single Brass Bolt Brass Brass Ss MS Brass DL16

LAL3210 Euro Profile Lock Body Single Brass Bolt R/C Brass Brass Ss MS Brass DL16

LAL3211 Euro Profile Lock Body Single Brass Bolt Brass Brass Ss MS Brass DL16

LAL3212 Euro Profile Lock Body Single Brass Bolt R/C Brass Brass Ss MS Brass DL16

LAL3215 Euro Profile Lock Body Single Zinc Bolt Brass Zinc Ss MS Brass DL16

LAL3216 Euro Profile Lock Body Single Zinc Bolt R/C Brass Zinc Ss MS Brass DL16

LAL3217 Euro Profile Lock Body Single Zinc Bolt Brass Zinc Ss MS Brass DL16

LAL3218 Euro Profile Lock Body Single Zinc Bolt R/C Brass Zinc Ss MS Brass DL16

LAL3221 Euro Profile Lock Body 3 Bullet Brass MS Ss MS Brass DL16 LAL3222 Euro Profile Lock Body 3 Bullet R/C Brass MS Ss MS Brass DL16 LAL3223 Euro Profile Lock Body 3 Bullet Brass MS Ss MS Brass DL16 LAL3224 Euro Profile Lock Body 3 Bullet R/C Brass MS Ss MS Brass DL16

LAL3227 Euro Profile Lock Body Brass Live Bolt & Follower, Zinc Dead Bolt Brass Zinc Ss MS Brass DL16

LAL3228 Euro Profile Lock Body Brass Live Bolt & Follower, Zinc Dead Bolt R/C Brass Zinc Ss MS Brass DL16

LAL3229 Euro Profile Lock Body Brass Live Bolt & Follower, Zinc Dead Bolt Brass Zinc Ss MS Brass DL16

LAL3230 Euro Profile Lock Body Brass Live Bolt & Follower, Zinc Dead Bolt R/C Brass Zinc Ss MS Brass DL16

LAL3233 Euro Profile Latch Body Brass N/A Ss MS Brass DL16 LAL3234 Euro Profile Latch Body R/C Brass N/A Ss MS Brass DL16




of 32 Signed R/001





DEAD BOLT


No. LAL3235 Euro Profile Latch Body Brass N/A Ss MS Brass DL16 LAL3236 Euro Profile Latch Body R/C Brass N/A Ss MS Brass DL16 LAL3239 Euro Profile Dead Bolt N/A Brass Ss MS N/A DL16 LAL3240 Euro Profile Dead Bolt R/C N/A Brass Ss MS N/A DL16 LAL3241 Euro Profile Dead Bolt N/A Brass Ss MS N/A DL16 LAL3242 Euro Profile Dead Bolt R/C N/A Brass Ss MS N/A DL16

LAL3245 Euro Profile Lock Body Night Latch Function Brass Brass Ss MS Brass DL16

LAL3246 Euro Profile Lock Body Night Latch Function R/C Brass Brass Ss MS Brass DL16

LAL3247 Euro Profile Lock Body Night Latch Function Brass Brass Ss MS Brass DL16

LAL3248 Euro Profile Lock Body Night Latch Function R/C Brass Brass Ss MS Brass DL16

LAL1430 3 Lvr Mortice Dead Lock T-3 N/A Zinc MS MS N/A DL21 LAL1431 3 Lvr Mortice Dead Lock T-3 N/A Zinc MS MS N/A DL21 LAL1432 3 Lvr Mortice Dead Lock T-3 R/C N/A Zinc MS MS N/A DL21 LAL1433 3 Lvr Mortice Dead Lock T-3 R/C N/A Zinc MS MS N/A DL21 LAL1434 3 Lvr Mortice Dead Lock T-3 N/A Zinc MS MS N/A DL21 LAL1435 3 Lvr Mortice Dead Lock T-3 N/A Zinc MS MS N/A DL21 LAL1436 3 Lvr Mortice Dead Lock T-3 R/C N/A Zinc MS MS N/A DL21 LAL1437 3 Lvr Mortice Dead Lock T-3 R/C N/A Zinc MS MS N/A DL21




of 32 Signed R/001



ANNEX C - MORTICE LOCKS AND LTACHES SUITABLE FOR USE ON TIMBER/MINERAL-BASED DOORSETS AND INSULATED STEEL-BASED DOORSET FOR UP TO 120 MINUTES


DEAD BOLT


No. LAL4003 Euro Profile Sash Lock Body Brass Zinc SS MS Brass DL12 LAL4004 Euro Profile Sash Lock Body R/C Brass Zinc SS MS Brass DL12 LAL4005 Euro Profile Sash Lock Body Brass Zinc SS MS Brass DL12 LAL4006 Euro Profile Sash Lock Body R/C Brass Zinc SS MS Brass DL12 LAL4009 Euro Profile Latch Body Brass N/A SS MS Brass DL12 LAL4010 Euro Profile Latch Body R/C Brass N/A SS MS Brass DL12 LAL4011 Euro Profile Latch Body Brass N/A SS MS Brass DL12 LAL4012 Euro Profile Latch Body R/C Brass N/A SS MS Brass DL12 LAL4015 Euro Profile Dead Bolt Only N/A Zinc SS MS N/A DL12 LAL4016 Euro Profile Dead Bolt Only R/C N/A Zinc SS MS N/A DL12 LAL4017 Euro Profile Dead Bolt Only N/A Zinc SS MS N/A DL12 LAL4018 Euro Profile Dead Bolt Only R/C N/A Zinc SS MS N/A DL12 LAL4027 Euro Profile Sash Lock Body Brass Zinc SS MS Brass DL12 LAL4028 Euro Profile Sash Lock Body R/C Brass Zinc SS MS Brass DL12 LAL4029 Euro Profile Sash Lock Body Brass Zinc SS MS Brass DL12 LAL4030 Euro Profile Sash Lock Body R/C Brass Zinc SS MS Brass DL12 LAL4033 Euro Profile Latch Body Brass N/A SS MS Brass DL12 LAL4034 Euro Profile Latch Body R/C Brass N/A SS MS Brass DL12 LAL4035 Euro Profile Latch Body Brass N/A SS MS Brass DL12 LAL4036 Euro Profile Latch Body R/C Brass N/A SS MS Brass DL12 LAL4039 Euro Profile Dead Bolt Only N/A Zinc SS MS N/A DL12 LAL4040 Euro Profile Dead Bolt Only R/C N/A Zinc SS MS N/A DL12 LAL4041 Euro Profile Dead Bolt Only N/A Zinc SS MS N/A DL12 LAL4042 Euro Profile Dead Bolt Only R/C N/A Zinc SS MS N/A DL12 LAL4051 Euro Profile Sash Lock Body Brass Zinc SS MS Brass DL12 LAL4052 Euro Profile Sash Lock Body R/C Brass Zinc SS MS Brass DL12 LAL4053 Euro Profile Sash Lock Body Brass Zinc SS MS Brass DL12 LAL4054 Euro Profile Sash Lock Body R/C Brass Zinc SS MS Brass DL12 LAL4057 Euro Profile Latch Body Brass N/A SS MS Brass DL12 LAL4058 Euro Profile Latch Body R/C Brass N/A SS MS Brass DL12 LAL4059 Euro Profile Latch Body Brass N/A SS MS Brass DL12 LAL4060 Euro Profile Latch Body R/C Brass N/A SS MS Brass DL12 LAL4063 Euro Profile Dead Bolt Only N/A Zinc SS MS N/A DL12 LAL4064 Euro Profile Dead Bolt Only R/C N/A Zinc SS MS N/A DL12 LAL4065 Euro Profile Dead Bolt Only N/A Zinc SS MS N/A DL12 LAL4066 Euro Profile Dead Bolt Only R/C N/A Zinc SS MS N/A DL12 LAL4123 Bathroom Lock Body Double Turn Brass Zinc SS MS Brass DL15 LAL4124 Bathroom Lock Body Double Turn R/C Brass Zinc SS MS Brass DL15 LAL4125 Bathroom Lock Body Double Turn Brass Zinc SS MS Brass DL15 LAL4126 Bathroom Lock Body Double Turn R/C Brass Zinc SS MS Brass DL15 LAL4129 Bathroom Lock Body Double Turn Brass Zinc SS MS Brass DL15 LAL4130 Bathroom Lock Body Double Turn R/C Brass Zinc SS MS Brass DL15 LAL4131 Bathroom Lock Body Double Turn Brass Zinc SS MS Brass DL15




of 32 Signed R/001



ANNEX C CONTINUED - MORTICE LOCKS AND LTACHES SUITABLE FOR USE ON TIMBER/MINERAL-BASED DOORSETS AND INSULATED STEEL-BASED DOORSET FOR UP TO 120 MINUTES


DEAD BOLT


No. LAL4132 Bathroom Lock Body Double Turn R/C Brass Zinc SS MS Brass DL15 LAL4135 Bathroom Lock Body Double Turn Brass Zinc SS MS Brass DL15 LAL4136 Bathroom Lock Body Double Turn R/C Brass Zinc SS MS Brass DL15 LAL4137 Bathroom Lock Body Double Turn Brass Zinc SS MS Brass DL15 LAL4138 Bathroom Lock Body Double Turn R/C Brass Zinc SS MS Brass DL15 LAL4109 Bathroom Lock Body Single Turn Brass Zinc SS MS Brass DL15a LAL4110 Bathroom Lock Body Single Turn R/C Brass Zinc SS MS Brass DL15a LAL4111 Bathroom Lock Body Single Turn Brass Zinc SS MS Brass DL15a LAL4112 Bathroom Lock Body Single Turn R/C Brass Zinc SS MS Brass DL15a LAL4115 Bathroom Lock Body Single Turn Brass Zinc SS MS Brass DL15a LAL4116 Bathroom Lock Body Single Turn R/C Brass Zinc SS MS Brass DL15a LAL4117 Bathroom Lock Body Single Turn Brass Zinc SS MS Brass DL15a LAL4118 Bathroom Lock Body Single Turn R/C Brass Zinc SS MS Brass DL15a LAL3004 Europrofile Sash Lock Body All Brass Brass Brass SS MS Brass DL17 LAL3005 Europrofile Sash Lock Body All Brass Brass Brass SS MS Brass DL17 LAL3006 Europrofile Sash Lock Body All Brass Brass Brass SS MS Brass DL17 LAL3007 Europrofile Sash Lock Body All Brass Brass Brass SS MS Brass DL17 LAL3008 Europrofile Sash Lock Body All Brass Brass Brass SS MS Brass DL17 LAL3009 Europrofile Sash Lock Body All Brass Brass Brass SS MS Brass DL17 LAL3010 Europrofile Sash Lock Body All Brass Brass Brass SS MS Brass DL17 LAL3011 Europrofile Sash Lock Body All Brass Brass Brass SS MS Brass DL17

LAL3016 Europrofile Sash Lock Body All Brass- Latch Only Brass N/A SS MS Brass DL17








LAL3028 Europrofile Sash Lock Body All Brass-Dead Bolt Only N/A Brass SS MS N/A DL17







of 32 Signed R/001





DEAD BOLT


No.





LAL3040 Europrofile Sash Lock Body All Brass R/C Brass Brass SS MS Brass DL17


LAL3042

Europrofile Sash Lock Body All Brass R/C Brass Brass SS MS Brass DL17






LAL3052 Europrofile Sash Lock Body All Brass- Latch Only R/C Brass N/A SS MS Brass DL17








LAL3064 Europrofile Sash Lock Body All Brass-Dead Bolt Only R/C N/A Brass SS MS N/A DL17






of 32 Signed R/001





DEAD BOLT


No.






LAL3076 Europrofile Sash Lock Body All Brass, Zinc Deadbolt Brass Zinc SS MS Brass DL17


LAL3078

Europrofile Sash Lock Body All Brass, Zinc Deadbolt Brass Zinc SS MS Brass DL17






LAL3088 Europrofile Sash Lock Body All Brass-Zinc Dead Bolt, Dead Bolt Only N/A Zinc SS MS N/A DL17








LAL3100 Europrofile Sash Lock Body All Brass, Zinc Deadbolt R/C Brass Zinc SS MS Brass DL17




of 32 Signed R/001





DEAD BOLT


No.








LAL3112 Europrofile Sash Lock Body All Brass-Zinc Dead Bolt, Dead Bolt Only R/C N/A Zinc SS MS N/A DL17

LAL3113

Europrofile Sash Lock Body All Brass-Zinc Dead Bolt, Dead Bolt Only R/C N/A Zinc SS MS N/A DL17







LAL3124 Europrofile Sash Lock Body All Zinc Zinc Zinc SS MS Zinc DL17










of 32 Signed R/001





DEAD BOLT


No.


LAL3136 Europrofile Sash Lock Body All Zinc- Latch Only Zinc N/A SS MS Zinc DL17








LAL3148

Europrofile Sash Lock Body All Zinc-Dead Bolt Only N/A Zinc SS MS N/A DL17

LAL3149 Europrofile Sash Lock Body All Zinc-Dead Bolt Only N/A Zinc SS MS N/A DL17







LAL3160 Europrofile Sash Lock Body All Zinc R/C Zinc Zinc SS MS Zinc DL17








of 32 Signed R/001





DEAD BOLT


No.




LAL3172 Europrofile Sash Lock Body All Zinc- Latch Only R/C Zinc N/A SS MS Zinc DL17







LAL3181

Europrofile Sash Lock Body All Zinc- Latch Only R/C Zinc N/A SS MS Zinc DL17

LAL3186 Europrofile Sash Lock Body All Zinc-Dead Bolt Only R/C N/A Zinc SS MS N/A DL17








LAL3504 Europrofile Sash Lock Body All Brass, 4 Steel Bullet Db Brass MS SS MS Brass DL18






of 32 Signed R/001





DEAD BOLT


No.






LAL3516 Europrofile Sash Lock Body All Brass-4 Steel Bullet Db, Dead Bolt Only N/A MS SS MS N/A DL18






LAL3522

Europrofile Sash Lock Body All Brass-4 Steel Bullet Db, Dead Bolt Only N/A MS SS MS N/A DL18


LAL3528 Europrofile Sash Lock Body All Brass, 4 Steel Bullet Db R/C Brass MS SS MS Brass DL18








LAL3540 Europrofile Sash Lock Body All Brass-4 Steel Bullet Db, Dead Bolt Only R/C N/A MS SS MS N/A DL18




of 32 Signed R/001





DEAD BOLT


No.








LAL3552 Europrofile Sash Lock Body All Brass, Tripin Brass Brass SS MS Brass DL19






LAL3558

Europrofile Sash Lock Body All Brass, Tripin Brass Brass SS MS Brass DL19


LAL3564 Europrofile Sash Lock Body All Brass, Tripin Dead Bolt Only N/A Brass SS MS N/A DL19











of 32 Signed R/001





DEAD BOLT


No.

LAL3576 Europrofile Sash Lock Body All Brass, Tripin R/C Brass Brass SS MS Brass DL19








LAL3588 Europrofile Sash Lock Body All Brass, Tripin Dead Bolt Only R/C N/A Brass SS MS N/A DL19






LAL3594

Europrofile Sash Lock Body All Brass, Tripin Dead Bolt Only R/C N/A Brass SS MS N/A DL19


LAL3600 Europrofile Sash Lock Body All Brass, 1 Bolt 2 Bullet Brass MS &

Brass SS MS Brass DL20
















of 32 Signed R/001





DEAD BOLT


No.



LAL3612 Europrofile Sash Lock Body All Brass, 1 Bolt 2 Bullet, Deadbolt Only N/A MS &

Brass SS MS N/A DL20















LAL3624 Europrofile Sash Lock Body All Brass, 1 Bolt 2 Bullet R/C Brass MS &










LAL3629

Europrofile Sash Lock Body All Brass, 1 Bolt 2 Bullet R/C Brass MS &






LAL3636 Europrofile Sash Lock Body All Brass, 1 Bolt 2 Bullet, Deadbolt Only R/C N/A MS &













of 32 Signed R/001





DEAD BOLT


No.







CERTIFICATE OF APPROVAL No CF 5531

Documents

Transcript of CERTIFICATE OF APPROVAL No CF 5531