CENTRAL ILLINOIS MANUFACTURING COMPANYnationalpetroleum.net/Cim-Tek-Catalog-04.20.09.pdfCim-Cart...
Transcript of CENTRAL ILLINOIS MANUFACTURING COMPANYnationalpetroleum.net/Cim-Tek-Catalog-04.20.09.pdfCim-Cart...
CENTRAL ILLINOIS MANUFACTURING COMPANY
50 YEARS PREVENT CAP
FUEL OILS
BIODIESEL
BIO-TEK®KKDEPENDABLE
HYDROSORBQUALITYBBIOFUELS
FILTERS
E
FILTERS
SO
ETHANOL HIGH-FLOW
TABLE OF CONTENTS
200 Series200 Particulate ................................................................................................................................................................................................................................ 1.1250 Particulate ................................................................................................................................................................................................................................ 1.3260 Particulate ................................................................................................................................................................................................................................ 1.5260 Hydrosorb ................................................................................................................................................................................................................................. 1.7
300 Series300 Particulate ................................................................................................................................................................................................................................ 2.1300 Hydrosorb ................................................................................................................................................................................................................................. 2.3
400 Series400 Particulate ................................................................................................................................................................................................................................ 3.1400 Hydrosorb ................................................................................................................................................................................................................................. 3.3450 Particulate ................................................................................................................................................................................................................................ 3.5450 Hydrosorb ................................................................................................................................................................................................................................. 3.7475 Particulate ................................................................................................................................................................................................................................ 3.9475 Hydrosorb ................................................................................................................................................................................................................................. 3.11
800 Series800 Particulate ................................................................................................................................................................................................................................ 4.1800 Hydrosorb ................................................................................................................................................................................................................................. 4.3
CenturionsCenturion I ....................................................................................................................................................................................................................................... 5.1Centurion II ...................................................................................................................................................................................................................................... 5.3Centurion III ..................................................................................................................................................................................................................................... 5.5Centurion IV ..................................................................................................................................................................................................................................... 5.7
VikingsViking 1 & 1F ................................................................................................................................................................................................................................... 6.1Viking 2 & 2F ................................................................................................................................................................................................................................... 6.3Viking 3F .......................................................................................................................................................................................................................................... 6.5Viking 4F .......................................................................................................................................................................................................................................... 6.7Viking Bag Filters ............................................................................................................................................................................................................................ 6.9
AdaptorsAdaptors 3/4” NPT inlet/outlet ....................................................................................................................................................................................................... 7.1Adaptors 1” NPT inlet/outlet ........................................................................................................................................................................................................... 7.2Adaptors 1 1/2” NPT inlet/outlet .................................................................................................................................................................................................... 7.2Adaptors 2” NPT inlet/outlet ........................................................................................................................................................................................................... 7.2Cap Off ............................................................................................................................................................................................................................................. 7.3
Bio-Tek®Bio-Tek® 260 Microglass ............................................................................................................................................................................................................... 8.1Bio-Tek® 260 Hydroglass ............................................................................................................................................................................................................... 8.3Bio-Tek® 300 Microglass/Hydroglass ........................................................................................................................................................................................... 8.5Bio-Tek® 400 Microglass/Hydroglass ........................................................................................................................................................................................... 8.7Bio-Tek® Alcohol Monitors ............................................................................................................................................................................................................ 8.9Bio-Tek® 800 Microglass ............................................................................................................................................................................................................... 8.11Bio-Tek® 800 Hydroglass ...............................................................................................................................................................................................................8.13Bio-Tek® High Bio Content ............................................................................................................................................................................................................. 8.15
Cim-CartCim-Cart IV ...................................................................................................................................................................................................................................... 9.1
HYDROBURN® Fuel Additives, Pre-Vent Cap & Tank Sampler KitPre-Vent ...........................................................................................................................................................................................................................................10.1Tank Sampler Kit ............................................................................................................................................................................................................................. 10.3 Hydroburn® Gasoline & Diesel ....................................................................................................................................................................................................... 10.4 Hydroburn PSR™ ............................................................................................................................................................................................................................ 10.5
Particulate filtration
For use with diesel, gasoline, ethanol or methanol blends up to 10%, and ultra-low sulfur diesel (ULSD)
Use with low-volume commercial power pumps
For use on above-ground storage tanks, above-ground gravity flow dispensing, transfer tanks, and day-use tanks
••••
Application
MODELS: 200E & 200AE
200 200 PARTICULATE
200E w/50003 Adaptor
1.1
Protects equipment
Cleaner change-out with draincock design
Removes common contaminants such as dirt, dust, and rust
Ease of installation with Pre-Lubed Gaskets
18 gpm (68.1 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
Resin-impregnated cellulose media
10 micron and 30 micron available
Equipped with draincock
Pre-Lubed Gaskets standard
Design Features
Benefits••••
••••••
For Particulate Removal With Draincock
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY
70002
70004 200AE-10
70045 200AE-30
Part No. Model No. Description
200E-10
Spin-On Filter with Draincock for Particulate Removal. 10 Micron Resin-Impregnated Cellulose Media. (1"–12 UNF Thread)
Spin-On Filter with Draincock for Particulate Removal. 30 Micron Resin-Impregnate Cellulose Media. (1"–12 UNF Thread)
Ordering Information
200 Particulate Series Dimensional Information
70046 200E-30
Adaptors 50181
50003
50002
50004
50005
50006
Aluminum
Cast-Iron
Cast-Iron
Cast-Iron
Aluminum
Aluminum
Cast-Iron
Single Adaptor 3/4" NPT 1"–12 UNF 200E
Single Adaptor 3/4" NPT 1"–12 UNF 200E
Single Adaptor 1" NPT 1"–12 UNF 200E Single Adaptor
Single Adaptor
Double Adaptor
Single Adaptor
50015
50001 Cast-Iron
1" NPT 1 3/8"–12 UNF 200AE
1 1/2" NPT 1"–12 UNF 200E
1 1/2" NPT 1"–12 UNF 200E
1 1/2" NPT 1"–12 UNF 200E
N/A 1"–12 UNF 200E
Part No. Material Description Fuel Ports Nose Use With
Spin-On Filter with Draincock for Particulate Removal. 10 Micron Resin-Impregnated Cellulose Media. (1 3/8"–12 UNF Thread)
Spin-On Filter with Draincock for Particulate Removal. 30 Micron Resin-Impregnated Cellulose Media. (1 3/8"–12 UNF Thread)
200C Cap Off for 1"–12 UNF Nose Adaptor
Top View w/Plate
3.75"8.00"
Thread Type: 1"–12 UNF or 1 3/8"–12 UNF
Section View 50003 Adaptor200 w/50003 Adaptor
Out
In
Nose
Replacement Gasket
90025 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
NOTE: See adaptor page for additional details.
1.2
250 250 PARTICULATE
For Particulate Removal W/Out Draincock
250E w/50003 Adaptor
Particulate filtration
For use with diesel, gasoline, ethanol or methanol blends up to 10%, and ultra-low sulfur diesel (ULSD)
Use with low-volume commercial power pumps
For use on above-ground storage tanks, above-ground gravity flow dispensing, transfer tanks, and day-use tanks
••••
Application
MODELS: 250E & 250AE
Protects equipment
Removes common contaminants such as dirt, dust, and rust
Ease of installation with Pre-Lubed Gaskets
18 gpm (68.1 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
Resin-impregnated cellulose media
2 micron, 10 micron, and 30 micron available
Pre-Lubed Gaskets standard
Design Features
Benefits•••
•••••
1.3
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
70819
70088 250E-30
70821 250AE-02
70005 250AE-10
70089 250AE-30
250E-02Spin-On Filter without Draincock for Particulate Removal. 2 Micron Cellulose/Microglass Blended Media. (1"–12 UNF)
Spin-On Filter without Draincock for Particulate Removal. 10 Micron Resin-Impregnated Cellulose Media. (1"–12 UNF)
Ordering Information
250 Particulate Series Dimensional Information
70003 250E-10
Spin-On Filter without Draincock for Particulate Removal. 30 Micron Resin-Impregnated Cellulose Media. (1"–12 UNF)
Spin-On Filter without Draincock for Particulate Removal. 2 Micron Cellulose/Microglass Blended Media. (1 3/8"–12 UNF)
Spin-On Filter without Draincock for Particulate Removal. 10 Micron Resin-Impregnated Cellulose Media. (1 3/8"–12 UNF)
Spin-On Filter without Draincock for Particulate Removal. 30 Micron Resin-Impregnated Cellulose Media. (1 3/8"–12 UNF)
Part No. Model No. Description
Top View w/Plate
3.75"7.25"
Thread Type: 1"– 12 UNF or 1 3/8"–12 UNF
50181
50003
50002
50004
50005
50006
Aluminum
Cast-Iron
Cast-Iron
Cast-Iron
Aluminum
Aluminum
Cast-Iron
Single Adaptor 3/4" NPT 1"–12 UNF 250E
Single Adaptor 3/4" NPT 1"–12 UNF 250E
Single Adaptor 1" NPT 1"–12 UNF 250E Single Adaptor
Single Adaptor
Double Adaptor
Single Adaptor
50015
1" NPT 1 3/8"–12 UNF 250AE
1 1/2" NPT 1"–12 UNF 250E
1 1/2" NPT 1"–12 UNF 250E
1 1/2" NPT 1"–12 UNF 250E
Part No. Material Description Fuel Ports Nose Use With
Section View 50003 Adaptor250 w/50003 Adaptor
Out
In
Nose
Adaptors
Replacement Gasket
90025 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 1.4
NOTE: See adaptor page for additional details.
260 260 PARTICULATE For Particulate Removal
Particulate removal
For use with diesel, gasoline, ethanol or methanol blends up to 10%, and ultra-low sulfur diesel
For use with low-volume commercial power pumps, and commercial fueling dispensers
For use on above-ground storage tanks, above-ground gravity flow dispensing, transfer tanks, and day-use tanks
••••
Application
MODEL: 260
Design Features
Benefits
18 gpm (68.1 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
Resin-impegnated cellulose media
10 micron and 30 micron available
Larger shell and longer element
Pre-Lubed Gaskets standard
••••••
Removes common contaminants such as dirt, dust, and rust
Longer element life
Higher dirt-holding capacity
Ease of installation with Pre-Lubed Gaskets
••••
260 w/50003 Adaptor
1.5
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Ordering Information
260 Particulate Series Dimensional Information
70094
Part No. Model No. Description
260-10
Spin-On Filter for Particulate Removal. 10 Micron Resin-Impregnated Cellulose Media. (1"–12 UNF Thread)
Spin-On Filter for Particulate Removal. 30 Micron Resin-Impregnated Cellulose Media. (1"–12 UNF Thread)
®
70095 260-30
Section View 50003 Adaptor
260 w/50003 Adaptor
Out
In
Nose Top View w/Plate
3.75"
Thread Type:1"–12 UNF
8.65"
Replacement Gasket
90025 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
Adaptors
NOTE: Filters are not to be used with aviation applications.
50181
50003
50002
50005
50006
Aluminum
Cast-Iron
Cast-Iron
Aluminum
Aluminum
Cast-Iron
Single Adaptor 3/4" NPT 1"–12 UNF All Above
Single Adaptor 3/4" NPT 1"–12 UNF All Above
Single Adaptor 1" NPT 1"–12 UNF All Above Single Adaptor
Double Adaptor
Single Adaptor
50015
1 1/2" NPT 1"–12 UNF All Above
1 1/2" NPT 1"–12 UNF All Above
1 1/2" NPT 1"–12 UNF All Above
Part No. Material Description Fuel Ports Nose Use With
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY
NOTE: See adaptor page for additional details.
1.6
Water detection and particulate removal which reduces flowsubstantially to indicate water contamination
For use with diesel, gasoline, and ultra-low sulfur diesel (ULSD)
For use with low-volume commercial power pumps, and commercial fueling dispensers
For use on above-ground storage tanks, above-ground gravity flow dispensing, transfer tanks, and day-use tanks
••••
Application
260 260 HYDROSORB
®
For Water Detection & Particulate Removal
MODELS: 260HS & 260AHS
18 gpm (68.1 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
Water detection and particulatecontamination removal media in a single unit
10 micron and 30 micron available
Pre-Lubed Gaskets standard
Design Features
260HS w/50003 Adaptor
Benefits
•••••
Monitors water content of storage tank by restricting flowwhen water is detected and provides signal for tank maintenance
Removes particulate contaminants such as dirt, dust, and rust
Ease of installation with Pre-Lubed Gaskets
•••
1.7
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
70062
70061 260AHS-10
70066 260AHS-30
Part No. Model No. Description
260HS-10
Spin-On Filter for Water Detection and Particulate Removal with 10 Micron Hydrosorb® Media. (1"–12 UNF Thread)
Spin-On Filter for Water Detection and Particulate Removal with 30 Micron Hydrosorb® Media. (1"–12 UNF Thread)
Ordering Information
260 Hydrosorb® Series Dimensional Information
70067 260HS-30
Adaptors
Spin-On Filter for Water Detection and Particulate Removal with 10 Micron Hydrosorb® Media. (1 3/8"–12 UNF Thread)
Spin-On Filter for Water Detection and Particulate Removal with 30 Micron Hydrosorb® Media. (1 3/8"–12 UNF Thread)
Section View 50003 Adaptor
260HS w/50003 Adaptor
Out
In
Nose
Top View w/Plate
3.75"
8.65"
Thread Type: 1"–12 UNF or 1 3/8"–12 UNF
50181
50003
50002
50004
50005
50006
Aluminum
Cast-Iron
Cast-Iron
Cast-Iron
Aluminum
Aluminum
Cast-Iron
Single Adaptor 3/4" NPT 1"–12 UNF 260HS
Single Adaptor 3/4" NPT 1"–12 UNF 260HS
Single Adaptor 1" NPT 1"–12 UNF 260HS Single Adaptor
Single Adaptor
Double Adaptor
Single Adaptor
50015
1" NPT 1 3/8"–12 UNF 260AHS
1 1/2" NPT 1"–12 UNF 260HS
1 1/2" NPT 1"–12 UNF 260HS
1 1/2" NPT 1"–12 UNF 260HS
Part No. Material Description Fuel Ports Nose Use With
NOTE: See adaptor page for additional details.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 1.8
Replacement Gasket
90025 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: 1. Filters are not to be used with aviation applications. 2. 260AHS is not for use with Dresser® Service Station dispensers.
300 300 PARTICULATE For Particulate Removal
Particulate contaminant removal
Compatible with gasoline, diesel, ethanol and methanol blends up to 10%, and ultra-low sulfur diesel (ULSD)
Designed for gasoline or diesel service station pumps, commercial fueling dispensers, most Dresser, and Tokheim® Service Station dispensers
•••
Application
Benefits
MODEL: 300 & 300MG
Design Features
300 w/50003 Adaptor
Removes particulate contaminants such as dirt, dust, and rust
Variety of media for different operating conditions
Recognized by the Underwriters Laboratory (UL®) for use with service station pumps and dispensers
Cellulose/Microglass media offers higher efficiencies and longer filter life
Ease of installation with Pre-Lubed Gaskets
•••••
•••••
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
2 micron, 10 micron, and 30 micron available
Microglass media offers high dirt-holding capacity
Pre-Lubed Gaskets standard
®
2.1
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
300 Particulate Series Dimensional Information
AdaptorsPart No. Material Description Fuel Ports Nose Use With
Replacement Gasket
90025 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
300 w/50003 Adaptor
5.50"
Section View 50003 Adaptor
Out
In
Nose
Top View w/Plate
3.75"
Thread Type:1"–12 UNF
NOTE: Filters are not to be used with aviation applications.
NOTE: See adaptor page for additional details.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 2.2
Ordering Information
70806
70012
70026
70077 300 Wire Mesh
Part No. Model No. Description
300-02
300-10
300-30
300MG-10
Spin-On Filter for Particulate Removal with 2 Micron Cellulose/Microglass Resin-Impregnated Media Blend. (1"–12 UNF Thread)
Spin-On Filter for Particulate Removal with 10 Micron Cellulose Resin-Impregnated Media. (1"–12 UNF Thread)
Spin-On Filter for Particulate Removal with 30 Micron Cellulose Resin-Impregnated Media. (1"–12 UNF Thread)
Spin-On Filter for Particulate Removal with 10 Micron High Performance Microglass Media. (1"–12 UNF Thread) Spin-On Filter for Particulate Removal with 144 Micron Stainless Steel Wire Mesh for Cold Weather Application. (1"–12 UNF Thread)
70010
50181
50003
50002 Cast-Iron Single Adaptor 1" NPT 1"–12 UNF All Above
50005 Aluminum
50006 Aluminum
50015 Cast-Iron
Aluminum
Cast-Iron
Single Adaptor
Single Adaptor 3/4” NPT 1"–12 UNF All Above
Single Adaptor 1 1/2" NPT 1"–12 UNF All Above
Double Adaptor 1 1/2" NPT 1"–12 UNF All Above
Single Adaptor 1 1/2" NPT 1"–12 UNF All Above
Part No. Material Description Fuel Ports Nose Use With
3/4” NPT 1"–12 UNF All Above
300HS w/50003 Adaptor
Water detection and particulate removal which reduces flowsubstantially to indicate water contamination
Compatible with gasoline, diesel, and ultra-low sulfur diesel (ULSD)
Designed for gasoline or diesel service station pumps, commercial fueling dispensers, most Dresser, and Tokheim® Service Station dispensers
•••
Application
Benefits
Design Features
Monitors water content of storage tank Added protection to gasoline dispenser meter chambers
Recognized by the Underwriters Laboratory (UL®) for use with service station pumps and dispensers Ease of installation with Pre-Lubed Gaskets
••••
300 300 HYDROSORB®
For Water Detection & Particulate Removal
•••••
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
10 micron and 30 micron Hydrosorb®
available
Designed to detect free water, emulsified water, and filters particulates
Pre-Lubed Gaskets standard
MODELS: 300HS
2.3
®
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
300 Hydrosorb® Series Dimensional Information
AdaptorsPart No. Material Description Fuel Ports Nose Use With
Replacement Gasket
90025 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
300HS w/50003 Adaptor
5.50"
Section View 50003 Adaptor
Out
In
Nose
Top View w/Plate
3.75"
Thread Type:1"–12 UNF
NOTE: Filters are not to be used with aviation applications.
NOTE: See adaptor page for additional details.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 2.4
Ordering Information
70059
Part No. Model No. Description
300HS-10
300HS-30
Spin-On Filter for Water Detection and Particulate Removal with 10 Micron Hydrosorb® Media. (1"–12 UNF Thread)
Spin-On Filter for Water Detection and Particulate Removal with 30 Micron Hydrosorb® Media. (1"–12 UNF Thread)
70064
50181
50003
50002 Cast-Iron Single Adaptor 1" NPT 1"–12 UNF All Above
50005 Aluminum
50006 Aluminum
50015 Cast-Iron
Aluminum
Cast-Iron
Single Adaptor
Single Adaptor 3/4” NPT 1"–12 UNF All Above
Single Adaptor 1 1/2" NPT 1"–12 UNF All Above
Double Adaptor 1 1/2" NPT 1"–12 UNF All Above
Single Adaptor 1 1/2" NPT 1"–12 UNF All Above
Part No. Material Description Fuel Ports Nose Use With
3/4” NPT 1"–12 UNF All Above
400 400 PARTICULATE For Particulate Removal
400 w/50032 Adaptor
Particulate contaminant removal
Compatible with gasoline, diesel, ethanol and methanol blends up to 10%, and ultra-low sulfur diesel (ULSD)
Designed for gasoline or diesel service station pumps, commercial fueling dispensers, and most Gilbarco® Service Station dispensers
•••
Application
Benefits
MODEL: 400 & 400MG
Design Features
Removes particulate contaminants such as dirt, dust, and rust
Recognized by the Underwriters Laboratory (UL®) for use with service station pumps and dispensers
Microglass media offers higher efficiencies and longer filter life
Ease of installation with Pre-Lubed Gaskets
••••
•••••
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
2 micron, 10 micron, and 30 micron available
Variety of media for different operating conditions
Pre-Lubed Gaskets standard
3.1
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Part No. Model No. Description
Spin-On Filter for Particulate Removal. 2 Micron Cellulose/Microglass Resin-Impregnated Media Blend. (1 1/2"–16 UNF Thread)
Spin-On Filter for Particulate Removal. 10 Micron Cellulose Resin-Impregnated Media. (1 1/2"–16 UNF Thread)
Spin-On Filter for Particulate Removal. 30 Micron Cellulose Resin-Impregnated Media. (1 1/2"–16 UNF Thread)
Spin-On Filter for Particulate Removal. 10 Micron High Performance Microglass Media. (1 1/2"–16 UNF Thread)
Ordering Information
400 Particulate Series Dimensional Information
AdaptorPart No. Material Description Fuel Ports Nose Use With
70808 400-02
70015 400-10
70016 400-30
70031 400MG-10
70081 400 Wire Mesh
Replacement GasketPart No. Description
50032 Aluminum Single Adaptor 1" NPT 1 1/2"–16 UNF All Above
90036 Buna-N Pre-Lubed Gasket Used On All Above
NOTE: Filters are not to be used with aviation applications.
Spin-On Filter for Particulate Removal. 144 Micron Stainless Steel Wire Mesh forCold Weather Application. (1 1/2"–16 UNF Thread)
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 3.2
NOTE: See adaptor page for additional details.
400 w/50032 Adaptor
Top View w/Plate
3.75"5.50"
Thread Type:1 1/2"–16 UNF
Section View w/50032 Adaptor
In
Out
Nose
400 400 HYDROSORB®
For Water Detection & Particulate Removal
400HS w/50032 Adaptor
Water detection and particulate removal which reduces flowsubstantially to indicate water contamination
Compatible with gasoline, diesel, and ultra-low sulfur diesel (ULSD)
Designed for gasoline or diesel service station pumps, commercial fueling dispensers, and most Gilbarco® Service Station dispensers
•••
Application
Benefits Monitors water content of storage tank Added protection to gasoline dispenser meter chambers
Recognized by the Underwriters Laboratory (UL®) for use with service station pumps and dispensersEase of installation with Pre-Lubed Gaskets
••••
•••••
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
10 micron and 30 micron Hydrosorb®
available
Designed to detect free water, emulsified water, and filter particulates
Pre-Lubed Gaskets standard
MODELS: 400HS
Design Features
3.3
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
400 Hydrosorb® Series Dimensional Information
Replacement Gasket
90036 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
AdaptorPart No. Material Description Fuel Ports Nose Use With
50032 Aluminum Single Adaptor 1" NPT 1 1/2"–16 UNF All Above
NOTE: Filters are not to be used with aviation applications.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 3.4
400HS w/50032 Adaptor
Top View w/Plate
3.75"5.50"
Thread Type:1 1/2"–16 UNF
Section View 50032 Adaptor
In
Out
Nose
Ordering Information
70060
Part No. Model No. Description
400HS-10
400HS-30
Spin-On Filter for Water Detection and Particulate Removal with 10 Micron Hydrosorb® Media. (1 1/2"–16 UNF Thread)
Spin-On Filter for Water Detection and Particulate Removal with 30 Micron Hydrosorb® Media. (1 1/2"–16 UNF Thread)
70065
NOTE: See adaptor page for additional details.
High-capacity particulate removal
Compatible with gasoline, diesel, ethanol and methanol blends up to 10%, and ultra-low sulfur diesel (ULSD)
Designed for gasoline or diesel service station pumps, commercial fueling dispensers, and most Gilbarco® Service Station dispensers
•••
Application
450 450 PARTICULATE
Design Features
Benefits
450 w/50032 Adaptor
•••••
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
2 micron, 10 micron, and 30 micron
available
Variety of media for different operating conditions
Pre-Lubed Gaskets standard
MODEL: 450 & 450MG
Assures delivery of fuel quality for high-capacity fill rates
Microglass media offers higher efficiencies and longer life
Recognized by the Underwriters Laboratory (UL®) for use with service station pumps and dispensers
Added protection to gasoline dispenser meter chambers
Decreased filter change-outs
Ease of installation Pre-Lubed Gaskets
••••••
For Particulate Removal
3.5
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
450 Particulate Series Dimensional Information
450 w/50032 AdaptorTop View w/Plate
3.75"
Thread Type:
1 1/2"–16 UNF
Section View 50032 Adaptor
In
Out
Nose
Part No. Model No. Description
450-02
Ordering Information
70810
70034
70032
70027
450-10
450MG-10
450-30
Spin-On Filter for Particulate Removal. 2 Micron Cellulose/Microglass Resin-Impregnated Media Blend. (1 1/2"–16 UNF Thread)
Spin-On Filter for Particulate Removal. 10 Micron Cellulose Resin-Impregnated Media. (1 1/2"–16 UNF Thread)
Spin-On Filter for Particulate Removal. 10 Micron High Performance Microglass Media. (1 1/2"–16 UNF Thread)
Spin-On Filter for Particulate Removal. 30 Micron Cellulose Resin-Impregnated Media. (1 1/2"–16 UNF Thread)
8"
Replacement Gasket
90036 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
AdaptorPart No. Material Description Fuel Ports Nose Use With
50032 Aluminum Single Adaptor 1" NPT 1 1/2"–16 UNF All Above
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 3.6
NOTE: See adaptor page for additional details.
Water detection and particulate removal which reduces flowsubstantially to indicate water contamination
Compatible with gasoline, diesel, and ultra-low sulfur diesel(ULSD)
Commonly used with Gilbarco® Service Station dispensers
•••
Application
450 450 HYDROSORB®
Design Features
Benefits
450HS w/50032 Adaptor
•••••
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
10 micron and 30 micron available
Designed to detect free water, emulsified water, and filter particulates
Pre-Lubed Gaskets standard
MODEL: 450HS
Monitors storage tank water condition
Provides added protection to gasoline dispenser meter chambers
Recognized by the Underwriters Laboratory (UL®) for use with service station pumps and dispensers
Decreased filter change-outs
Ease of installation Pre-Lubed Gaskets
•••••
For Water Detection & Particulate Removal
3.7
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Ordering Information
450 Hydrosorb® Series Dimensional Information
70075
Part No. Model No. Description
450HS-10
450HS-30
Spin-On Filter for Water Detection and Particulate Removal with 10 Micron Hydrosorb® Media. (1 1/2"–16 UNF Thread)
Spin-On Filter for Water Detection and Particulate Removal with 30 Micron Hydrosorb® Media. (1 1/2"–16 UNF Thread)
70076
450HS w/50032 AdaptorTop View w/Plate
3.75"
Thread Type:1 1/2"–16 UNF
Section View 50032 Adaptor
In
Out
Nose
Replacement Gasket
90036 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
AdaptorPart No. Material Description Fuel Ports Nose Use With
50032 Aluminum Single Adaptor 1" NPT 1 1/2"–16 UNF All Above
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 3.8
NOTE: See adaptor page for additional details.
8"
Extended life particulate removal filter
Compatible with gasoline, diesel, ethanol and methanol blends up to 10%, and ultra-low sulfur diesel (ULSD)
Commonly used with Gilbarco® Service Station dispensers
•••
Application
475 475 PARTICULATE
Design Features
475XL w/50032 Adaptor
BenefitsIncreased flow capacity and extended life
Removes common contaminants at high flow rates
Recognized by the Underwriters Laboratory (UL®) for use with service station pumps and dispensers
Decreased filter change-outs
Ease of installation with Pre-Lubed Gaskets
•••••
••••
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
10 micron and 30 micron available
Pre-Lubed Gaskets standard
MODEL: 475XL
For Particulate Removal
3.9
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
475 Particulate Series Dimensional Information
475 w/50032 AdaptorTop View w/Plate
3.75"
Thread Type:
1 1/2"–16 UNF
Section View 50032 Adaptor
In
Out
Nose
Part No. Model No. Description
475XL-10
Ordering Information
70097
70092
475XL-30
Spin-On Filter for Particulate Removal. 10 Micron Cellulose Resin-Impregnated Media. (1 1/2"–16 UNF Thread)
Spin-On Filter for Particulate Removal. 30 Micron Cellulose Resin-Impregnated Media. (1 1/2"–16 UNF Thread)
Replacement Gasket
90036 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
AdaptorPart No. Material Description Fuel Ports Nose Use With
50032 Aluminum Single Adaptor 1" NPT 1 1/2"–16 UNF All Above
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 3.10
NOTE: See adaptor page for additional details.
10.50"
475 Hydrosorb® Series Dimensional Information
475XLHS w/50032 AdaptorTop View w/Plate
3.75"
Thread Type:
1 1/2"–16 UNF
Section View 50032 Adaptor
In
Out
Nose
Part No. Model No. Description
475XLHS-10
Ordering Information
70098
70043
475XLHS-30
10.50"
Replacement Gasket
90036 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
AdaptorPart No. Material Description Fuel Ports Nose Use With
50032 Aluminum Single Adaptor 1" NPT 1 1/2"–16 UNF All Above
Spin-On Filter for Water Detection and Particulate Removal. 10 Micron Hydrosorb® Media with Extra Length Housing. (1 1/2"–16 UNF Thread)
Spin-On Filter for Water Detection and Particulate Removal. 30 Micron Hydrosorb® Media with Extra Length Housing. (1 1/2"–16 UNF Thread)
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 3.12
NOTE: See adaptor page for additional details.
800HS w/Dual Adaptor
800 800 HYDROSORB®
•••
Water detection and particulate removal which reduces flowsubstantially to indicate water contamination
Extended life filter for high-volume dispensing
Compatible with gasoline, diesel, and ultra-low sulfur diesel (ULSD)
•••
Application
•••••
40 gpm (151 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
10 micron and 30 micron Hydrosorb® available
Designed to detect free water, emulsified water, and remove particulates
Pre-Lubed Gaskets standard
Benefits
Design Features
MODEL: 800HS
Monitors storage tank water condition
Decreased filter change-outs
Ease of installation Pre-Lubed Gaskets
For Water Detection & Particulate Removal
4.3
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Ordering Information
800HS Hydrosorb® Series Dimensional Information
Replacement GasketPart No. Description
Adaptors
50109
50026 805GP
50163
50011 820
50027 810GP
50028 820GP
805 Single Aluminum Adaptor
810
1” NPT 1 1/2"–16 UNF All Above
Single Aluminum Adaptor 1 1/2” NPT 1 1/2"–16 UNF All Above
Double Aluminum Adaptor 2" NPT 1 1/2"–16 UNF All Above
Part No. Model No. Description Fuel Ports Nose Use With
1” NPT 1 1/2"–16 UNF All Above
Single Aluminum Adaptorw/Gauge Ports–1/8" NPT Double Aluminum Adaptor w/Gauge Ports–1/8" NPT
Single Aluminum Adaptorw/Gauge Ports–1/8" NPT
2" NPT 1 1/2"–16 UNF All Above
1 1/2" NPT 1 1/2"–16 UNF All Above
NOTE: See adaptor page for additional details.
Part No. Model No. Description
70063
70068
800HS-30
800HS-10
1 1/2"–16 UNF
Thread Type:
5.06"
90041 Buna-N Pre-Lubed Gasket Used On All Above
NOTE: Filters are not to be used with aviation applications.
Spin-On Filter for Water Detection and Particulate Removal with 10 Micron Hydrosorb® Media. (1 1/2"–16 UNF Thread)
Spin-On Filter for Water Detection and Particulate Removal with 30 Micron Hydrosorb® Media. (1 1/2"–16 UNF Thread)
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 4.4
Top View w/Plate
11.00"
800HS w/Double Aluminum Adaptor
11.00"
800HS w/Aluminum Adaptor
Centurion I w/Adaptor
Designed for high–volume service station applications, commercial fueling centers, marine fueling centers, agriculturalfueling, and truck stop fueling centers
Filter housings and replaceable elements are compatible with gasoline, diesel, methanol and ethanol blends up to 10%, biodiesel up to B20, and ultra-low sulfur diesel (ULSD)
Filter housings may be used in hydraulic oil applications
Demonstrated extended equipment life Assures delivery of quality fuel
Cleaner change-out with draincock design
Eco-friendly reusable housing
••••
•••
Application
CENTURION ICENTURION I
Design Features
Benefits
HIGH–VOLUMESingle Housing Assembly
30 gpm (113 lpm) maximum flow
Standard 1" NPT inlet/outlet flow area
Elements are available in 10 and 30 micron paper for particulate removal
Elements are available in 10 and 30 micron Hydrosorb® media for waterdetection and particulate removal
Elements are available in 2 micron Cellulose/Microglass blend for longer life of particulate removal
Equipped with a draincock for easy drainage of captured contaminants
••••••
MODEL: CENTURION I
5.1
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Centurion I Dimensional Information
Ordering Information
Centurion I Elements
Part No. Model Description
Single Adaptor40001
Part No. Model No. Description
E0230065
30002
30004
30033
30036
E10
E30
EHS-10
EHS-30
30195 E-10M Element for Particulate Removal. 10 Micron High Performance Micgroglass Media.
Element for Particulate Removal. High–Performance 2 Micron Microglass/Cellulose Media Blend.
Element for Particulate Removal. 10 Micron Cellulose Media.
Element for Particulate Removal. 30 Micron Cellulose Media.
Element for Water Detection and Particulate Removal. 10 Micron Hydrosorb® Media.
Element for Water Detection and Particulate Removal. 30 Micron Hydrosorb® Media.
Centurion I w/Adaptor Filter Element Section View of Element
14 1/2"
5 1/4"4 1/2"
9 1/16"
NOTE: 1. Element includes gaskets, washer, and filter element. 2. Filters are not to be used with aviation applications.
Housing Kit Consisting of Adaptor, Housing, Washer, Acorn Nut, and Draincock. Element Not Included. (1"NPT Inlet/Outlet)
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 5.2
Material: Aluminum adaptor Used on: Centurion I Inlet/Outlet ports: 1" NPT
Description Dimensions Adaptor Part No.
90004
Centurion II w/Adaptor
Designed for high–volume service station applications, commercial fueling centers, marine fueling centers, agriculturalfueling, and truck stop fueling centers
Filter housings and replaceable elements are compatible with gasoline, diesel and ultra-low sulfur diesel (ULSD), but may NOT be used with methanol, methanol blended fuels, or oils when coalescing element used
Filter housings may not be used in hydraulic oil applications
Staged filtration applications
Demonstrated extended equipment life Assures delivery of quality fuel
Cleaner change–out with draincock design
•••
••
••
Application
CENTURION IICENTURION II
Design Features
Benefits
HIGH–VOLUMEDouble Housing Assembly
30 gpm (113 lpm) maximum flow
Standard 1" NPT inlet/outlet flow area
Elements are available in 10 and 30 micron paper for particulate removal
Elements are available in 10 and 30 micron Hydrosorb® media for water detection and particulate removal
Elements are available in 2 micron Cellulose/Microglass blend for longer life
Equipped with a draincock
••••••
MODELS: CENTURION II
5.3
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Centurion II Dimensional Information
Ordering Information
Centurion II Elements
Part No. Model Description
Double Adaptor40008
Part No. Model No. Description
E0230065
30002
30004
30033
30036
30005
E10
E30
EHS-10
EHS-30
Stage I * Centurion II Coalescing Element
Centurion II w/Adaptor Filter Element Section View of Element
14 1/2"
10 1/2"
4 1/2"
9 1/16"
NOTE: 1. * It is recommended that the Centurion II Coalesing Element be used in Stage I followed by a standard Centurion element in Stage II. 2. Element includes gasket, washer, and filter element. 3. Filters are not to be used with aviation applications. 4. Centurion II requires two elements.
Element for Particulate Removal. High–Performance 2 Micron Microglass/Cellulose Media Blend.
Element for Particulate Removal. 10 Micron Cellulose Media.
Element for Particulate Removal. 30 Micron Cellulose Media.
Element for Water Detection and Particulate Removal. 10 Micron Hydrosorb® Media.
Element for Water Detection and Particulate Removal. 30 Micron Hydrosorb® Media.
Housing Kit Consisting of Adaptor, Housing, Washer, Acorn Nut, and Draincock. Element Not Included. (1"NPT Inlet/Outlet)
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 5.4
Material: Aluminum adaptor Used on: Centurion II Inlet/Outlet ports: 1" NPT
Description Dimensions Adaptor Part No.
90013
Designed for high-volume service station applications, commercial fueling centers, marine fueling centers, agriculturalfueling, and truck stop fueling centers
Filter housings and replaceable elements are compatible with gasoline, diesel, methanol and ethanol blends up to 10%, biodiesel up to B20, and ultra-low sulfur diesel (ULSD)
Filter housings may be used in hydraulic oil applications
Parallel flow applications
Demonstrated extended equipment life Assures delivery of quality fuel
Cleaner change-out with draincock designEco-friendly resuable housing
60 gpm (227 lpm) maximum flow
Standard 1 1/2" NPT inlet/outlet flow
Elements are available in 10 and 30 micron paper for particulate removal
Elements are available in 10 and 30 micron Hydrosorb® media for water detection and particulate removal
Elements are available in 2 micron Cellulose/Microglass blend for longer life
Equipped with a draincock
CENTURION III
Centurion III w/Adaptor
CENTURION IIICENTURION III
HIGH–VOLUMEDual Housing Parallel Flow
5.5
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Centurion III Dimensional Information
Ordering Information
Centurion III Elements
Part No. Model Description
DualAdaptor40013
Part No. Model No. Description
E0230065
30002
30004
30033
30036
E10
E30
EHS-10
EHS-30
Filter ElementSection View of Element
4 1/2"
9 1/16"
Centurion III w/Adaptor
14 1/2"
10 1/2"
NOTE: 1. Element includes gaskets, washer, and filter element. 2. Filters are not to be used with aviation applications. 3. Centurion III requires two elements.
Element for Particulate Removal. High Performance 2 Micron Microglass/Cellulose Media Blend.
Element for Particulate Removal. 10 Micron Cellulose Media.
Element for Particulate Removal. 30 Micron Cellulose Media.
Element for Water Detection and Particulate Removal. 10 Micron Hydrosorb® Media.
Element for Water Detection and Particulate Removal. 30 Micron Hydrosorb® Media.
Housing Kit Consisting of Adaptor, Housing, Washer, Acorn Nut, and Draincock. Element Not Included. (1 1/2" NPT Inlet/Outlet)
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 5.6
Material: Aluminum adaptor Used on: Centurion III Inlet/Outlet ports: 1 1/2" NPT
Description Dimensions Adaptor Part No.
90014
30195 E-10M Element for Particulate Removal. 10 Micron High Performance Micgroglass Media.
Designed for high–volume service station applications, commercial fueling centers, marine fueling centers, agriculturalfueling, and truck stop fueling centers
Filter housings and replaceable elements are compatible with gasoline, diesel, methanol and ethanol blends up to 10%, biodiesel up to B20, and ultra-low sulfur diesel (ULSD)
Filter housings may be used in hydraulic oil applications
Triple parallel flow applications
90 gpm flow capacityDemonstrated extended equipment life
Numerous element optionsAssures delivery of quality fuels
90 gpm (340 lpm) maximum flow
Standard 2" NPT inlet/outlet flow
Elements are available in 10 and 30 micron paper for particulate removal
Elements are available in 10 and 30 micron Hydrosorb® media for water detection and particulate removal
Elements are available in 2 micron Cellulose/Microglass blend for longer life
Equipped with a draincock for easy drainage of captured contaminants
CENTURION IV
CENTURION IVCENTURION IVHIGH–VOLUMEThree Element Parallel Flow
Centurion IV w/Adaptor
5.7
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Centurion IV Dimensional Information
Ordering Information
Centurion IV Elements
Part No. Model Description
Triple Adaptor40020
Part No. Model No. Description
E0230065
30002
30004
30033
30036
E10
E30
EHS-10
EHS-30
Filter Element Section View of Element
4 1/2"
9 1/16"
Centurion IV w/Adaptor
14 1/2"
10 1/2"
NOTE: 1. Element includes gaskets, washer, and filter element. 2. Consult Cim-Tek® Filtration for oil, methanol, and ethanol compatability. 3. Filters are not to be used with aviation applications. 4. Centurion IV requires three elements.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 5.8
Element for Particulate Removal. High Performance 2 Micron Microglass/Cellulose Media Blend.
Element for Particulate Removal. 10 Micron Cellulose Media.
Element for Particulate Removal. 30 Micron Cellulose Media.
Element for Water Detection and Particulate Removal. 10 Micron Hydrosorb® Media.
Element for Water Detection and Particulate Removal. 30 Micron Hydrosorb® Media.
Housing Kit Consisting of Adaptor, Housing, Washer, Acorn Nut, and Draincock. Element Not Included. (2" NPT Inlet/Outlet)
Material: Aluminum adaptor Used on: Centurion IV Inlet/Outlet ports: 1" NPT
Description Dimensions Adaptor Part No.
90015
30195 E-10M Element for Particulate Removal. 10 Micron High Performance Micgroglass Media.
•••
Application
VIKING 1VIKING 1
Design Features
Benefits
FILTER HOUSING
Capable of filtering gasoline, ethanol blends up to E15, biodiesel blends up to B100, diesel fuel, ultra-low sulfur diesel (ULSD), andfuel oils
Industrial fluids such as lubrication oils, hydraulic oils, synthetic oils, transformer oils, many solvents, and thinners may be filtered
Bulk fueling racks and bulk fluid transfer
Removes common contaminants such as dirt, dust, and rust
Increased filtering capacity
Easy opening and access with swing down lid
Full ASME Certification available
••••
120 gpm (450 lpm) maximum flow
150 psi rating
Standard 2" NPT inlet/outlet flow,flanged available
Epoxy coated on inside and outside
3 bolt swing down lid
Inlet to Outlet dimensions 12" (2" NPT)
Inlet to Outlet dimensions 13 1/2"(Flanged model)
12"x12" bottom plate
Carbon Steel housing
1/4" ports for the optional pressure gauge kit
Requires 1 – 6"x18" element
•••••••••••
MODEL: VIKING 1 & 1F
6.1
Viking 1F Flanged
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 6.2
Ordering Information
Viking 1 Dimensional Information
Viking 1 Housing
Top View of Lid
6"
18"
E-1300-02
E-1300-10
E-1300-30
E-1300MG-03
E-1300MG-05
E-1300MG-10
E-1300HS-10
E-1300HS-30
Viking 1 Elements
Part No. Model Description Use With
30066
30008
30009
30204
30203
30202
30034
30037
Element for Particulate Removal. 2 Micron Cellulose/Microglass Media Blend.
Element for Particulate Removal. 10 Micron Cellulose Media.
Element for Particulate Removal. 30 Micron Cellulose Media.
Element for Particulate Removal. 3 Micron High Performance Microglass Media.
Element for Particulate Removal. 5 Micron High Performance Microglass Media.
Element for Particulate Removal. 10 Micron High Performance Microglass Media.
Element for Water Detection and Particulate Removal. 10 Micron Hydrosorb® Media.
Element for Water Detection and Particulate Removal. 30 Micron Hydrosorb® Media.
All Above
All Above
All Above
All Above
All Above
All Above
All Above
All Above
Replacement Gaskets
90560 Standard Main Buna Gasket Seal Used On All Above
90599 Optional Main Viton Gasket Seal On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
NOTE: Viking 1 & 1F require one element.
32 1/2"28 1/2"
3 3/8"7 1/2"
12"
Inlet Outlet
12"
9 1/2"
40186
40187
Viking 1
Viking 1FFlanged
Part No. Model Description (Elements Not Included.) Flow PSI NPT
Epoxy Coated Inside/Out Carbon Steel Filter Housing. 120 gpm 2" NPT
Epoxy Coated Inside/Out Carbon Steel Filter Housing. 120 gpm –
150 psi
150 psi
Capable of filtering gasoline, ethanol blends up to E15, biodiesel blends up to B100, diesel fuel, ultra-low sulfur diesel (ULSD), andfuel oils
Industrial fluids such as lubrication oils, hydraulic oils, synthetic oils, transformer oils, many solvents, and thinners may be filtered
Bulk fueling racks and bulk fluid transfer
VIKING 2VIKING 2
FILTER HOUSING
Viking 2F Flanged
MODEL: VIKING 2 & 2F
Design Features
BenefitsRemoves common contaminants such as dirt, dust, and rustIncreased filtering capacity
Easy opening and access with swing down lid
Full ASME Certification available
••••
150 gpm (567.8 lpm) maximum flow
150 psi rating
Standard 2" NPT inlet/outlet flow,flanged available
Epoxy coated on inside and outside
3 bolt swing down lid
Inlet to Outlet dimensions 12" (2" NPT)
Inlet to Outlet dimensions 13 1/2" (Flanged model)
12"x12" bottom plate
Carbon Steel housing
1/4" ports for the optional pressure gauge kit
Requires 2 – 6"x18" elements
•••••••••••
6.3
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Viking 2 Dimensional Information
Top View of Lid
Filter Element
6"
18"
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY
Ordering Information
E-1300-02
E-1300-10
E-1300-30
E-1300MG-03
E-1300MG-05
E-1300MG-10
E-1300HS-10
E-1300HS-30
Viking 2 Elements
Part No. Model Description Use With
30066
30008
30009
30204
30203
30202
30034
30037
Element for Particulate Removal. 2 Micron Cellulose/Microglass Media Blend.
Element for Particulate Removal. 10 Micron Cellulose Media.
Element for Particulate Removal. 30 Micron Cellulose Media.
Element for Particulate Removal. 3 Micron High Performance Microglass Media.
Element for Particulate Removal. 5 Micron High Performance Microglass Media.
Element for Particulate Removal. 10 Micron High Performance Microglass Media.
Element for Water Detection and Particulate Removal. 10 Micron Hydrosorb® Media.
Element for Water Detection and Particulate Removal. 30 Micron Hydrosorb® Media.
All Above
All Above
All Above
All Above
All Above
All Above
All Above
All Above
Replacement Gaskets
90560 Standard Main Buna Gasket Seal Used On All Above
90599 Optional Main Viton Gasket Seal Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
NOTE: Viking 2 & 2F require two elements.
Viking 2 Housing12"
7 1/2"Inlet Outlet
3 3/8"
46 1/2"
50 1/2"
9 1/2"
12"
40188
40189
Viking 2
Viking 2FFlanged
Part No. Model Description (Elements Not Included.) Flow PSI NPT
Epoxy Coated Inside/Out Carbon Steel Filter Housing. 150 gpm 2" NPT
Epoxy Coated Inside/Out Carbon Steel Filter Housing. 150 gpm –
150 psi
150 psi
6.4
VIKINGVIKING 3 3F
FILTER HOUSING
Viking 3F Flanged
Application
Design Features300 gpm (1135.6 lpm) maximum flow
150 psi rating
Standard 3" flanged inlet/outlet flow
Epoxy coated on inside and out
8 bolt swing away lid
Inlet to Outlet dimensions 24"
Carbon Steel housing
1/4" ports for the optional pressure gauge kit
Requires 4 – 6"x18" elements
•••••••••
MODEL: VIKING 3F
Removes common contaminants such as dirt, dust, and rustIncreased filtering capacity
Convenient housing drain
Wide variety of filtering applicationsEasy opening access and extra secure seal with 8 bolt swing lid
Full ASME Certification available
••••••
Benefits
6.5
•••
Capable of filtering gasoline, ethanol blends up to E15, biodiesel blends up to B100, diesel fuel, ultra-low sulfur diesel (ULSD), andfuel oils
Industrial fluids such as lubrication oils, hydraulic oils, synthetic oils, transformer oils, many solvents, and thinners may be filtered
Bulk fueling racks and bulk fluid transfer
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 6.6
Replacement Gaskets
90561 Standard Main Buna Gasket Seal Used On Viking 3F
90600 Optional Main Viton Gasket Seal Used On Viking 3F
Part No. Description
Viking 3F Housing
Ordering Information
Viking 3F Dimensional Information
Top View of Lid
NOTE: Viking 3F requires four elements.
NOTE: Filters are not to be used with aviation applications.
Filter Element
6"
18"
E-1300-02
E-1300-10
E-1300-30
E-1300MG-03
E-1300MG-05
E-1300MG-10
E-1300HS-10
E-1300HS-30
Viking 3F Elements
Part No. Model Description
30066
30008
30009
30204
30203
30202
30034
30037
Element for Particulate Removal. 2 Micron Cellulose/Microglass Media Blend.
Element for Particulate Removal. 10 Micron Cellulose Media.
Element for Particulate Removal. 30 Micron Cellulose Media.
Element for Particulate Removal. 3 Micron High Performance Microglass Media.
Element for Particulate Removal. 5 Micron High Performance Microglass Media.
Element for Particulate Removal. 10 Micron High Performance Microglass Media.
Element for Water Detection and Particulate Removal. 10 Micron Hydrosorb® Media.
Element for Water Detection and Particulate Removal. 30 Micron Hydrosorb® Media.
Inlet
40 1/2"
17"
59 1/4"
Outlet
6"
12"
12"
24"
40190
Viking 3FFlanged Only
Part No. Model Description (Elements Not Included.) Flow PSI NPT
Epoxy Coated Inside/Out Carbon Steel Filter Housing. 300 gpm –
150 psi
500 gpm (1892.7 lpm) maximum flow
150 psi rating
Standard 4" flanged inlet/outlet flow
Epoxy coated on inside and outside
8 bolt swing away lid
Inlet to Outlet dimensions 28"
Carbon Steel housing
1/4" port for the optional pressure gauge kit
Requires 8 – 6"x 18" elements
Removes common contaminants such as dirt, dust, and rust
Increased filtering capacity
Convenient housing drain
Wide variety of filtering applications
Easy opening and extra secure seal with 8 bolt swing lid
Full ASME Certification available
VIKING 4VIKING 4F
Benefits
FILTER HOUSING
Viking 4F Flanged
MODEL: VIKING 4F
6.7
•••
Capable of filtering gasoline, ethanol blends up to E15, biodiesel blends up to B100, diesel fuel, ultra-low sulfur diesel (ULSD), andfuel oils
Industrial fluids such as lubrication oils, hydraulic oils, synthetic oils, transformer oils, many solvents, and thinners may be filtered
Bulk fueling racks and bulk fluid transfer
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Ordering Information
Viking 4F Dimensional Information
Viking 4F Housing
6"
18"
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 6.8
Replacement Gaskets
90561 Standard Main Buna Gasket Seal Used On Viking 4F
90600 Optional Main Viton Gasket Seal Used On Viking 4F
Part No. Description
NOTE: Viking 4F requires eight elements.
NOTE: Filters are not to be used with aviation applications.
E-1300-02
E-1300-10
E-1300-30
E-1300MG-03
E-1300MG-05
E-1300MG-10
E-1300HS-10
E-1300HS-30
Viking 4F Elements
Part No. Model Description
30066
30008
30009
30204
30203
30202
30034
30037
Element for Particulate Removal. 2 Micron Cellulose/Microglass Media Blend.
Element for Particulate Removal. 10 Micron Cellulose Media.
Element for Particulate Removal. 30 Micron Cellulose Media.
Element for Particulate Removal. 3 Micron High Performance Microglass Media.
Element for Particulate Removal. 5 Micron High Performance Microglass Media.
Element for Particulate Removal. 10 Micron High Performance Microglass Media.
Element for Water Detection and Particulate Removal. 10 Micron Hydrosorb® Media.
Element for Water Detection and Particulate Removal. 30 Micron Hydrosorb® Media.
40191
Viking 4FFlanged Only
Part No. Model Description (Elements Not Included.) Flow PSI NPT
Epoxy Coated Inside/Out Carbon Steel Filter Housing. 500 gpm –
150 psi
Top View of Lid
Filter Element
78 3/8"
59 1/2"
18"
12"
17 1/2"
12"
Outlet
Inlet
6"
28"
VIKINGVIKING
Benefits
BAG FILTER HOUSINGS
Viking B1
MODEL: VIKING B1,B2, & B3
•••
Capable of filtering gasoline, ethanol blends up to E85, biodiesel blends up to B100, diesel fuel, ultra-low sulfur diesel, and fuel oils
Industrial fluids such as lubrication oils, hydraulic oils, synthetic oils, transformer oils, many solvents, and thinners may be filtered
Ideal for suction applications
6.9
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
6.10
Housings for Bag Filters
Bag Filters
Viking B2 Housing
29 1/2"32 3/8"
23 3/8"
8 5/8"
Inlet
Outlet
7"
NOTE: 1. Bag filters are not to be used with aviation applications.
Part No. Model Description
Viking B1 Description Viking B2 Description Viking B3 Description Part No. Part No. Part No.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY
Viking Bag Series Dimensional Information
41 1/2"44 1/2"
35"
8 5/8"
Inlet
Outlet
7"
Viking B3 Housing
40192
40193
40194
90591
90592
90593
90594
90595
90596
90575
90576
90577
90578
90579
90580
90583
90584
90585
90586
90587
90588
Viking B1 (1.5" NPT)
Viking B2 (2" NPT)
Viking B3 (2" NPT)
5 Micron Polyester Media
10 Micron Polyester Media
25 Micron Polyester Media
75 Micron Nylon Mesh
150 Micron Nylon Mesh
300 Micron Nylon Mesh
5 Micron Polyester Media
10 Micron Polyester Media
25 Micron Polyester Media
75 Micron Nylon Mesh
150 Micron Nylon Mesh
300 Micron Nylon Mesh
5 Micron Polyester Media
10 Micron Polyester Media
25 Micron Polyester Media
75 Micron Nylon Mesh
150 Micron Nylon Mesh
300 Micron Nylon Mesh
Carbon Steel Filter Housing Designed for Flow up to 40 gpm (Bag & Stand Not Included)
Carbon Steel Filter Housing Designed for Flow up to 80 gpm (Bag Not Included)
Carbon Steel Filter Housing Designed for Flow up to 120 gpm (Bag Not Included)
B1 Bag Stand
NOTE: 1. B2 & B3 housings come equipped with stand.
Model Description Part No.
90565 Viking B1 Stand Carbon Steel Stand for Viking B1 Housing
Viking B1 Housing
17 1/4"4 1/2"
24 1/2"21 1/4"
4"
Inlet
Outlet
6 3/4"
11 3/8"Viking B2 & B3
Viking B1
Top View of Lid
Material: Cast–iron adaptor
Used on: 200E, 250E, 260, & 300 series Inlet/Outlet ports: 3/4" NPT Nose outside thread: 1"–12 UNF
Material: Aluminum adaptor
Used on: 200E, 250E, 260, & 300 series Inlet/Outlet ports: 3/4" NPT Nose outside thread: 1"–12 UNF
Material: Cast–iron adaptor
Used on: 200E, 250E, 260, & 300 series Inlet/Outlet ports: 1" NPT Nose outside thread: 1"–12 UNF
Material: Cast–iron adaptor
Used on: 200AE & 250AE series Inlet/Outlet ports: 1" NPT Nose outside thread: 1 3/8"–12 UNF
Material: Aluminum adaptor–gauge portsUsed on: 800 series Inlet/Outlet ports: 1" NPT Nose outside thread: 1 1/2"–16 UNF
Material: Aluminum adaptor Used on: 400, 450, & 475 series Inlet/Outlet ports: 1" NPT Nose outside thread: 1 1/2"–16 UNF
Part No.
50003
50181
50002
50004
50026
50032
Adaptor Description Dimensions
Part No. Adaptor Description Dimensions
3/4" NPT Inlet/Outlet Ports
1" NPT Inlet/Outlet Ports
7.1
ADAPTORS PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Part No.
50109
Part No.
50015
50005
50027
50163
50006
Part No.
50011
50028
Material: Aluminum adaptor Used on: 800 series Inlet/Outlet ports: 1" NPT Nose outside thread: 1 1/2"–16 UNF
Material: Cast–iron adaptor Used on: 200E, 250E, 260, & 300 series Inlet/Outlet ports: 1 1/2" NPT Nose outside thread: 1"–12 UNF
Material: Aluminum adaptor Used on: 200E, 250E, 260, & 300 series Inlet/Outlet ports: 1 1/2" NPTNose outside thread: 1"–12 UNF
Material: Aluminum adaptor–gauge ports Used on: 800 series Inlet/Outlet ports: 1 1/2" NPT Nose outside thread: 1 1/2"–16 UNF
Material: Aluminum adaptor Used on: 800 series Inlet/Outlet ports: 1 1/2" NPT Nose outside thread: 1 1/2"–16 UNF
Material: Aluminum dual adaptor Used on: 200E, 250E, 260, & 300 series Inlet/Outlet ports: 1 1/2" NPT Nose outside thread: 1"–12 UNF
Adaptor Description Dimensions
Adaptor Description Dimensions 1 1/2" NPT Inlet/Outlet Ports
7.2
Adaptor Description Dimensions 2" NPT Inlet/Outlet Ports
Material: Aluminum dual adaptor Used on: 800 series Inlet/Outlet ports: 2" NPT Nose outside thread: 1 1/2"–16 UNF
Material: Aluminum dual adaptor–gauge ports Used on: 800 series Inlet/Outlet ports: 2" NPT Nose outside thread: 1 1/2"–16 UNF
Part No.
50017N
50016N
50032N
50018N
50163N
50011N
Part No.
50001 Material: Cast–iron adaptor Used on: 200E, 250E, 260 & 300 series Nose outside thread: 1"–12 UNF
Adaptor Description Dimensions
Material: Nickel–plated adaptor Used on: Part #70025 Inlet/Outlet ports: 3/4" NPT Nose outside thread: 1"–12 UNF
Material: Nickel–plated adaptor Used on: Part #70025 Inlet/Outlet ports: 1" NPT Nose outside thread: 1"–12 UNF
Material: Nickel–plated adaptor Used on: Model #70039 Inlet/Outlet ports: 1" NPT Nose outside thread: 1 1/2"–16 UNF
Material: Nickel–plated dual adaptor Used on: Part #70025 Inlet/Outlet ports: 1 1/2" NPT Nose outside thread: 1"–12 UNF
Material: Nickel–plated adaptor Used on: Part #70041 Inlet/Outlet ports: 1 1/2" NPT Nose outside thread: 1 1/2"–16 UNF
Material: Nickel–plated dual adaptor Used on: Part #70041 Inlet/Outlet ports: 2" NPT Nose outside thread: 1 1/2"–16 UNF
Adaptor Description Dimensions Adaptors for High Bio–Content
Adaptor Cap for 1"–12 UNF Thread
7.3
NOTE: BIO-TEK FILTERS ARE COMPATIBLE WITH B100 AND ULTRA-LOW SULFUR DIESEL AS INDICATED. BIO-TEK FILTERS HAVE BEEN TESTED USING B100 MEETING BQ9000 QUALITY STANDARDS.
BIO-TEK®
RENEWABLE FUEL FILTER TECHNOLOGY
260 260 MICROGLASSFor Particulate Removal
260BMG w/50003 Adaptor260BMG w/50003 Adaptor
Application
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
2 micron and 10 micron Microglass media compatible with bio-fuels
Longer cannister and longer element
Pre-Lubed Gasket standard
High performance media compatible with aggressive solventnature of renewable fuels
Higher dirt-holding capacity results in longer element life
Extends the life of engine fuel filters and injectors
Ease of installation with our Pre-Lubed Gasket
Ethanol-blended gasoline up to E15, biodiesel blends up to B100, and ultra-low sulfur diesel (ULSD)
For use on above ground storage tanks, above ground gravity flow dispensing, transfer tanks, and day-use tanks
For use with low-volume commercial power pumps, commercial fueling dispensers, and most agricultural pumps
Specifically designed for renewable fuel filtration
Design Features
Benefits
•••••
••••
••••
MODEL: 260BMG & 260ABMG
8.1
BIO-TEK®
RENEWABLE FUEL FILTER TECHNOLOGY
Ordering Information
260 Bio-Tek® Microglass Series Dimensional Information
70230
70221
70225
Part No. Model No. Description
260BMG-02
260BMG-10
260ABMG-02
260ABMG-10
Spin-On Particulate Removal Filter for Ethanol Blends up to E15 & Biodiesel up to B100. 2 Micron High Performance Microglass Media. (1"–12 UNF Thread)
Spin-On Particulate Removal Filter for Ethanol Blends up to E15 & Biodiesel up to B100. 10 Micron High Performance Microglass Media. (1"–12 UNF Thread)
Spin-On Particulate Removal Filter for Ethanol Blends up to E15 & Biodiesel up to B100. 2 Micron High Performance Microglass Media. (1 3/8"–12 UNF Thread)
Spin-On Particulate Removal Filter for Ethanol Blends up to E15 & Biodiesel up to B100. 10 Micron High Performance Microglass Media. (1 3/8"–12 UNF Thread)
70234
Section View 50003 Adaptor
260 w/50003 Adaptor
Out
In
Nose Top View w/Plate
3.75"
Thread Type: 1"–12 UNF or 1 3/8"–12 UNF
Replacement Gasket
90025 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
NOTE: See adaptor page for additional details.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 8.2
8.65"
Adaptors
50003
50002
50004
50181
50005
50006
50015 Cast-Iron Single Adaptor
Cast-Iron
Cast-Iron
Cast-Iron
Aluminum
Aluminum
Aluminum
Single Adaptor 3/4" NPT 1"–12 UNF 260BMG
Single Adaptor 1" NPT 1"–12 UNF 260BMG
Single Adaptor 1" NPT 1 3/8"–12 UNF 260ABMG Single Adaptor
Single Adaptor
Double Adaptor
1 1/2" NPT 1"–12 UNF 260BMG
1 1/2" NPT 1"–12 UNF 260BMG
1 1/2" NPT 1"–12 UNF 260BMG
1 1/2" NPT 1"–12 UNF 260BMG
Part No. Material Description Fuel Ports Nose Use With
Application
260 260 HYDROGLASSFor Water Detection & Particulate Removal
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
2 micron Progressive Density® Hydroglass media detects water and filters particulates
10 micron high performance Hydroglass media detects water and filters particulates
Pre-Lubed Gasket standard
High performance media compatible with aggressive solvent nature of renewable fuels
Monitors water content of storage tank by restricting flow when water is detected and provides signal for tank maintenance
Higher dirt-holding capacity results in longer element life
Ease of installation with our Pre-Lubed Gasket
260BHG w/50003 Adaptor260BHG w/50003 Adaptor
Water detection and particulate removal for gasoline, biodiesel up to B100, and ultra-low sulfur diesel
For use on above ground storage tanks, above ground gravity flow dispensing, transfer tanks, and day-use tanks
For use with low-volume commercial power pumps, commercial fueling dispensers, and agricultural pumps
Specifically designed for renewable fuel filtration
Design Features
Benefits
8.3
•••••
••••
••••
MODEL: 260BHG & 260ABHG
BIO-TEK®
RENEWABLE FUEL FILTER TECHNOLOGY
Ordering Information
260 Bio-Tek® Hydroglass Series Dimensional Information
70232
70223
70227
Part No. Model No. Description
260BHG-02
260BHG-10
260ABHG-02
260ABHG-10
Spin-On Water Detection & Particulate Removal Filter for Gasoline, BiodieselBlends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 2 Micron Progressive Density® Hydroglass Media. (1"–12 UNF Thread)
Spin-On Water Detection & Particulate Removal Filter for Gasoline, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 10 Micron High Performance Hydroglass Media. (1"–12 UNF Thread)
Spin-On Water Detection & Particulate Removal Filter for Gasoline, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 2 Micron Progressive Density® Hydroglass Media. (1 3/8"–12 UNF Thread)
Spin-On Water Detection & Particulate Removal Filter for Gasoline, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 10 Micron High Performance Hydroglass Media. (1 3/8"–12 UNF Thread)
70236
Section View 50003 Adaptor
260 w/50003 Adaptor
Out
In
Nose Top View w/Plate
3.75"
Thread Type: 1"– 12 UNF or 1 3/8"–12 UNF
Replacement Gasket
90025 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
NOTE: See adaptor page for additional details.
8.65"
Adaptors
50003
50002
50004
50181
50005
50006
Cast-Iron
Cast-Iron
Cast-Iron
Aluminum
Aluminum
Aluminum
Single Adaptor 3/4" NPT 1"–12 UNF 260BHG
Single Adaptor 1" NPT 1"–12 UNF 260BHG
Single Adaptor 1" NPT 1 3/8"–12 UNF 260ABHG Single Adaptor
Single Adaptor
Double Adaptor
1 1/2" NPT 1"–12 UNF 260BHG
1 1/2" NPT 1"–12 UNF 260BHG
1 1/2" NPT 1"–12 UNF 260BHG
Part No. Material Description Fuel Ports Nose Use With
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 8.4
•••
Application
300 300 MICROGLASSFor Particulate Removal
Ethanol-blended gasoline up to E15, biodiesel up to B100, and ultra-low sulfur diesel (ULSD)
Designed for gasoline or diesel service station pumps, commercial fueling dipsensers, most Dresser,® and Tokheim® Service Station dispensers
Specifically designed for renewable fuel filtration
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) bar maximum working pressure
2 micron and 10 micron Microglass media compatible with bio-fuels
Pre-Lubed Gasket standard
High performance media compatible with aggressive solvent nature of renewable fuels
Removes contaminants such as dirt, dust, and rust
Recognized by Underwriters Laboratories (UL®) for use in service station pumps and dispensers
High contaminant holding capacity results in longer filter life
Ease of installation with our Pre-Lubed Gasket
300MB w/50003 Adaptor300MB w/50003 Adaptor
MODEL: 300BMG
Design Features
Benefits
••••
•••••
8.5
BIO-TEK®
RENEWABLE FUEL FILTER TECHNOLOGY
70057
70058
70235
Part No. Model No. Description
300BMG-02
300BMG-10
300BHG-10
Spin-On Particulate Removal Filter for Gasoline Ethanol Blends up to E15, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 2 Micron High Performance Microglass Media. (1"–12 UNF Thread)
Spin-On Particulate Removal Filter for Gasoline Ethanol Blends up to E15, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 10 Micron High Performance Microglass Media. (1"–12 UNF Thread)
Spin-On Particulate Removal Filter for Gasoline, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 10 Micron High Performance Hydroglass Media. (1 1/2" UNF Thread)
Ordering Information
300 Bio-Tek® Microglass Series Dimensional Information
Adaptors
Replacement Gasket
90025 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
50003
50181
50002 Cast-Iron
50005 Aluminum
50006 Aluminum
50015 Cast-Iron
Cast-Iron
Aluminum
Single Adaptor
Single Adaptor 3/4” NPT 1" –12 UNF All Above
Single Adaptor 1" NPT 1" –12 UNF All Above
Single Adaptor 1 1/2" NPT 1" –12 UNF All Above
Double Adaptor 1 1/2" NPT 1" –12 UNF All Above
Single Adaptor 1 1/2" NPT 1" –12 UNF All Above
Part No. Material Description Fuel Ports Nose Use With
3/4” NPT 1" –12 UNF All Above
300BMG w/50003 Adaptor
5.50"
Section View 50003 Adaptor
In
Out
Nose
Top View w/Plate
3.75"
Thread Type:1"–12 UNF
NOTE: Filters are not to be used with aviation applications.
NOTE: See adaptor page for additional details.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 8.6
400BMG w/50032 Adaptor400BMG w/50032 Adaptor
400 400 MICROGLASSFor Particulate Removal
•••
ApplicationEthanol-blended gasoline up to E15, biodiesel up to B100, & ultra-low sulfur diesel (ULSD)
Designed for gasoline or diesel service station pumps, commercial fueling dipsensers, and most Gilbarco® Service Station dispensers
Specially designed for renewable fuel filtration
25 gpm (94.6 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
2 micron and 10 micron Microglass media compatible with bio-fuels
Pre-Lubed Gasket standard
MODEL: 400BMG
Design Features••••
High performance media compatible with aggressive solvent nature of renewable fuels
High dirt-holding capacity results in longer life
Recognized by Underwriters Laboratories (UL®) for use in service station pumps and dispensers
Removes particulate contaminants such as dirt, dust, and rust
Ease of installation with Pre-Lubed Gaskets
•••••
Benefits
8.7
BIO-TEK®
RENEWABLE FUEL FILTER TECHNOLOGY
70105
70104
70008
Part No. Model No. Description
400BMG-02
400BMG-10
400BHG-10
Spin-On Particulate Removal Filter for Gasoline Ethanol–Blends Up To E15, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 2 Micron High Performance Microglass Media. (1 1/2"–16 UNF Thread)
Spin-On Particulate Removal Filter for Gasoline Ethanol–Blends Up To E15, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 10 Micron High Performance Microglass Media. (1 1/2"–16 UNF Thread)
Spin-On Particulate Removal Filter for Gasoline, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 10 Micron High Performance Hydroglass Media. (1 1/2"–16 UNF Thread)
Ordering Information
400 Bio-Tek® Microglass Series Dimensional Information
Replacement Gasket
90036 Buna-N Pre-Lubed Gasket Used On All Above
Part No. Description
NOTE: Filters are not to be used with aviation applications.
5.50"
Top View w/Plate
3.75"
Thread Type:1 1/2"–16 UNF
Section View 50032 Adaptor
In
Out
Nose
400BMG w/50032 Adaptor
Adaptor
50032 Aluminum Single Adaptor 1" NPT 1 1/2"–16 UNF
Part No. Material Description Fuel Ports Nose
NOTE: See adaptor page for additional details.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 8.8
201 NORTH CHAMPAIGN STREET • BEMENT, ILLINOIS 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY
Bio-Tek® Monitor Filters Dimensional Information
260 Series 300 Series 260 Series 300 Series 400 Series 400 Series 450 Series 450 Series 475 Series 475 Series
NOTE: See adaptor page for additional details.
5 1/2"
1"–12 UNF-2B
5 1/2"
ø3 11/16"
5 1/2"
1 1/2"–16 UNF
ø3 3/4"
ø3 3/4"ø3 3/4"
1 1/2"–16 UNF 2B1 1/2"–16 UNF 2B
10 1/2"
8"
1"–12 UNF-2B
ø3 11/16"
8 5/8"
1"–12 UNF-2B
NOTE: Filters are not to be used with aviation applications.
70116 1"–12 UNF
70122 1"–12 UNF
70018 300MB-30 1"–12 UNF
70114 1 1/2"–16 UNF
70120 1 1/2"–16 UNF
70106 1 1/2"–16 UNF
70023 1 1/2"–16 UNF
70117 1"–12 UNF
70111 1 1/2"–16 UNF
25 Gpm / 94.6 Lpm
25 Gpm / 94.6 Lpm
25 Gpm / 94.6 Lpm
25 Gpm / 94.6 Lpm
25 Gpm / 94.6 Lpm
25 Gpm / 94.6 Lpm
25 Gpm / 94.6 Lpm
25 Gpm / 94.6 Lpm
25 Gpm / 94.6 Lpm
5 Micron Phase Separation Monitor & Particulate Filter
10 Micron Phase Separation Monitor & Particulate Filter
30 Micron Phase Separation Monitor & Particulate Filter
5 Micron Phase Separation Monitor & Particulate Filter
10 Micron Phase Separation Monitor & Particulate Filter
30 Micron Phase Separation Monitor & Particulate Filter
Bio-Tek® Alcohol Monitor Filter (Detects Phase Separation in Ethanol Blends up to E15) Part No. Model No. Description Pressure Flow Thread Size
50003 3/4" NPT 1"–12 UNF 260, 300 Series
50181 1"–12 UNF 260, 300 Series
50002 1" NPT 1"–12 UNF 260, 300 Series
50005 1 1/2" NPT 1"–12 UNF 260, 300 Series
50006 1 1/2" NPT 1"–12 UNF 260, 300 Series
50015 1 1/2" NPT 1"–12 UNF 260, 300 Series
Single Adaptor
Single Adaptor
Single Adaptor
Single Adaptor
Double Adaptor
Single Adaptor
Bio-Tek® Alcohol Monitor Filter Adaptors Part No. Material Description Fuel Ports Nose Use With
50032 Aluminum Single Adaptor 1" NPT 1 1/2"–16 UNF 400, 450, 475 Series
90025 Buna-N Pre-Lubed Gasket Used On 260 and 300 series
90036 Buna-N Pre-Lubed Gasket Used On 400 series
Bio-Tek® Alcohol Monitor Replacement Gaskets Part No. Description
10 Micron High Capacity Phase Separation Monitor & Particulate Filter
10 Micron High Capacity Phase Separation Monitor & Particulate Filter
10 Micron Extended Life Phase Separation Monitor & Particulate Filter
300 Series 260 Series 400 Series 450 Series 475 Series
8.10
800BMG w/Dual Adaptor
800 800 MICROGLASSFor Particulate Removal
MODEL: 800BMG
High performance media compatible with aggressive solventnature of bio-fuels
Removes common particulate contaminants at high-flow rates Extended length provides higher dirt-holding capacity
Ease of installation with Pre-Lubed Gaskets
••••
Particulate removal for ethanol-blended gasoline up to E15biodiesel blends up to B100, and ultra-low sulfur diesel (ULSD)
Extended life filter for high-volume renewable fuel dispensing
For use at high-capacity commercial fueling centers
Specifically designed for bio-fuel filtration
••••
Application
••••
40 gpm (151 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
2 micron and 10 micron media compatible with bio-fuels
Pre-Lubed Gaskets standard
Design Features
Benefits
8.11
BIO-TEK®
RENEWABLE FUEL FILTER TECHNOLOGY
Ordering Information
Adaptors
800 Bio-Tek® Microglass Series Dimensional Information
50109
50026 805GP
50163
50011 820
50027 810GP
50028 820GP
805 Single Aluminum Adaptor
810
1” NPT 1 1/2"–16 UNF All Above
Single Aluminum Adaptor 1 1/2” NPT 1 1/2"–16 UNF All Above
Double Aluminum Adaptor 2" NPT 1 1/2"–16 UNF All Above
Part No. Model No. Description Fuel Ports Nose Use With
1” NPT 1 1/2"–16 UNF All Above
Replacement GasketPart No. Description
Single Aluminum Adaptorw/Gauge Ports–1/8" NPT Double Aluminum Adaptor w/Gauge Ports–1/8" NPT
Single Aluminum Adaptorw/Gauge Ports–1/8" NPT
2" NPT 1 1/2"–16 UNF All Above
1 1/2" NPT 1 1/2"–16 UNF All Above
Part No. Model No. Description
70036 800BMG-02
70028 800BMG-10
High-Volume Commercial Particulate Removal Spin-On Filter for Ethanol Blends upto E15, Biodiesel up to B100 and Ultra-Low Sulfur Diesel. 2 Micron High Performance Microglass Media. (1 1/2"–16 UNF Thread)
High-Volume Commercial Particulate Removal Spin-On Filter for Ethanol Blends upto E15, Biodiesel up to B100 and Ultra-Low Sulfur Diesel. 10 Micron High Performance Microglass Media. (1 1/2"–16 UNF Thread)
11.00"
800BMG w/Aluminum Adaptor
Top View w/Plate
1 1/2"–16 UNF
Thread Type:
5.06"
11.00"
800BMG w/Double Aluminum Adaptor
90041 Buna-N Pre-Lubed Gasket Used On All Above
NOTE: Filters are not to be used with aviation applications.
NOTE: See adaptor page for additional details.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 8.12
® Hydroglass media800BHG w/Dual Adaptor
800BHG
800 800 HYDROGLASSFor Water Detection & Particulate Removal
BIO-TEK®
RENEWABLE FUEL FILTER TECHNOLOGY
Ordering Information
800 Bio-Tek® Hydroglass Series Dimensional Information
Replacement GasketPart No. Description
Part No. Model No. Description
70037 800BHG-02
70024 800BHG-10
High-Volume Commercial Particulate Removal Spin-On Filter for Gasoline, Biodiesel up to B100, and Ultra-Low Sulfur Diesel. 2 Micron Progressive Density®
Hydroglass Media. (1 1/2"–16 UNF Thread)
High-Volume Commercial Particulate Removal Spin-On Filter for Gasoline, Biodiesel up to B100, and Ultra-Low Sulfur Diesel. 10 Micron High PerformanceHydroglass Media. (1 1/2"–16 UNF Thread)
11.00"
800BHG w/Aluminum Adaptor
Top View w/Plate
1 1/2"–16 UNF
Thread Type:
5.06"
11.00"
800BHG w/Double Aluminum Adaptor
90041 Buna-N Pre-Lubed Gasket Used On All Above
NOTE: Filters are not to be used with aviation applications.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 8.14
Adaptors
50109
50026 805GP
50163
50011 820
50027 810GP
50028 820GP
805 Single Aluminum Adaptor
810
1” NPT 1 1/2"–16 UNF All Above
Single Aluminum Adaptor 1 1/2” NPT 1 1/2"–16 UNF All Above
Double Aluminum Adaptor 2" NPT 1 1/2"–16 UNF All Above
Part No. Model No. Description Fuel Ports Nose Use With
1” NPT 1 1/2"–16 UNF All Above
Single Aluminum Adaptorw/Gauge Ports–1/8" NPT Double Aluminum Adaptor w/Gauge Ports–1/8" NPT
Single Aluminum Adaptorw/Gauge Ports–1/8" NPT
2" NPT 1 1/2"–16 UNF All Above
1 1/2" NPT 1 1/2"–16 UNF All Above
NOTE: See adaptor page for additional details.
HIGHHIGH Bio–Blends E85, M100 & B100BIO-CONTENTBIO-CONTENT
•••
ApplicationFor use with ethanol blends up to E85, methanol blends up to M100, biodiesel blends up to B100, and ultra-low sulfur diesel (ULSD)
High and low-volume commercial fueling, marine fueling centers, truck stop fueling centers, and agricultural fueling centers
For use with high concentration bio-fuels
25 gpm (94.6 lpm) to 40 gpm (151 lpm) maximum flow
50 psi (3.4 bar) maximum working pressure
Specially designed Microglass media to filter high bio-contentfuels
Epoxy coated housings
Specially plated components
Viton® gasket standard
High performance media compatible with aggressive solventnature of bio-fuels
Removes common particulate contaminants at high-flow rates
Extended length provides higher dirt-holding capacity
Removes contaminants such as dirt, dust, and rust
MODELS: 300BHA, 400BHA, & 800BHA
Design Features
Benefits
••••••
••••
BHA Filters w/AdaptorsBHA Filters w/Adaptors
8.15
BIO-TEK®
RENEWABLE FUEL FILTER TECHNOLOGY
70025
70993
70039
70991
70041
Part No. Model No. Description
300BHA-01
300BHA-05
400BHA-01
400BHA-05
800BHA-01
Spin-On Particulate Removal Filter for High Bio-Content Fuels of Ethanol Blends up to E85, Methanol Blends up to M100, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 1 Micron High Performance Microglass Media. (1"–12 UNF Thread)
Spin-On Particulate Removal Filter for High Bio-Content Fuels of Ethanol Blends up to E85, Methanol Blends up to M100, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 5 Micron High Performance Microglass Media. (1"–12 UNF Thread)
Spin-On Particulate Removal Filter for High Bio-Content Fuels of Ethanol Blends up to E85, Methanol Blends up to M100, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 1 Micron High Performance Microglass Media. (1 1/2"–16 UNF Thread)
Spin-On Particulate Removal Filter for High Bio-Content Fuels of Ethanol Blends up to E85, Methanol Blends up to M100, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 5 Micron High Performance Microglass Media. (1 1/2"–16 UNF Thread)
Spin-On Particulate Removal Filter for High Bio-Content Fuels of Ethanol Blends up to E85, Methanol Blends up to M100, Biodiesel Blends up to B100, and Ultra-Low Sulfur Diesel (ULSD). 1 Micron High Performance Microglass Media. (1 1/2"–16 UNF Thread)
Bio-Tek® High Bio–Content Series Ordering Information
Replacement Gaskets
90037 Viton® Gasket Used On 300BHA Series
90115 Viton® Gasket Used On 400BHA Series
90039 Viton® Gasket Used On 800BHA Series
Part No. Description
NOTE: Filters are not to be used with aviation applications.
300BHA Adaptors
50017N
50016N Nickel-Plated Single Adaptor 1" NPT 1"–12 UNF 300BHA
50018N Nickel-Plated Double Adaptor 1 1/2" NPT 1"–12 UNF 300BHA
50163N Nickel-Plated Single Adaptor 1 1/2" NPT 1 1/2"–16 UNF 800BHA
50011N Nickel-Plated Double Adaptor 2" NPT 1 1/2"–16 UNF 800BHA
Nickel-Plated Single Adaptor
Part No. Material Description Fuel Ports Nose Use With
3/4” NPT 1"–12 UNF 300BHA
400BHA Adaptor
800BHA Adaptors
50032N
Nickel-Plated Single Adaptor
Part No. Material Description Fuel Ports Nose Use With
Part No. Material Description Fuel Ports Nose Use With
1” NPT 1 1/2"–16 UNF 400BHA
NOTE: See adaptor page for additional details.
NOTE: See adaptor page for additional details.
NOTE: See adaptor page for additional details.
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 8.16
Portable, contaminant removal system designed for cleaning the bottoms of gasoline and diesel fuel underground storage tanks
Utilizes a snake-type hose that will travel the bottom of the tank Removes tank bottom contaminants such as water, water- alcohol mixes, microbiological growths, hydrocarbon emulsion, and others without taking the product out of the tank
Suited for bio-fuel tank conversion
••••
CIM-CART IV CIM-CART IV CONTAMINANT REMOVAL
MODEL: CIM-CART IV
A self-contained pump and reel are mounted on a rigid base for durability Guide tube made of stainless steel on the upper section and polypropylene on the lower half extends from 8' to 16' The 50' snake-type hose is constructed of reinforced polyurethane tubing The 8' discharge hose is polyurethane A double diaphragm air-operated suction pump with Viton® seals used for fluid transfer A ground strap bonds the tank to the unit and the unit to a waste container
Requires 2 HP air compressor (not included)
Design Features •••••••
Benefits
Application
A mesh strainer protects the pump from large contaminantsRemoves water and contaminants from tank bottomDecreases filter change-outs due to cleaner fuel in tank
Clean service station tanks without shutdown of facility
••••
9.1
NEWNEW
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
23"
Cim-Cart IV Dimensional Information
WATERPARTICULATESPARTICULATES
FUEL
30"
Front View of Cim-Cart IVSide View of Cim-Cart IV Guide Tube
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY
(186"Extended)
Part No. Model Description
Cim-Cart IV40055
Ordering Information
Portable, Tank Contaminant Removal System with Snake-Type Hose, Reel, and Guide Tube.
53 1/2"120"
WATER
FUEL
9.2
•••
PRE–VENTVapor Control Cap
Helps maintain fuel quality by reducing condensation and evaporation loss
Designed to divert rain and condensation away from the fill hole
Limits the release of vapors that escape into the atmosphere protecting the environment
MODELS: PRE–VENT I & II
Application
Design Features
Benefits
For use on small above ground farm, commercial gasoline and distillate tanks
Fuel transfer and small oil storage tanks
Industrial oil transfer tanks
Allows up to 30 gpm fluid removal
Pressure cap valve opens at 2 1/2 lbs to reduce pressure, while the vacuum release opens at 1 1/2 ounces when the tank cools
Designed for 2" NPT tank opening
Pre-Vent II Fill Caps offer a lockable design for security
Special coating to reduce rust
"The Pre–Vent was introduced to the market in 1956 after two years of research and development. Today's emphasis on conservation and the environment has increased the demand for our first product." – A. Richard Ayers
•••
••
•••
Pre–Vent I
10.1
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
Part No. Description
Cast-Iron Base with Plated Cap.
Cast-Iron Base with Plated Cap Featuring Security Anti-Theft Arm.
Ordering Information
Pre–Vent I & II Dimensional Information
60001
60002
Replacement Parts
60003 Steel Replacement Cap All Above
50012 Cast-Iron Pre-Vent Adaptor All Above
Part No. Material Description Use With
Top View of Cap
2.5"
4.0"5 1/2"
Pre–Vent I w/Cap
201 N. CHAMPAIGN STREET • BEMENT, IL 61813 • TOLL FREE PHONE: 888-898-7187 • TOLL FREE FAX: 888-515-2611 PHONE: 217-678-2511 • FAX: 217-678-2611 • [email protected] • WWW.CIM-TEK.COM
CENTRAL ILLINOIS MANUFACTURING COMPANY 10.2
Pre–Vent II w/Anti–Theft Arm & Cap
For use with gasoline engines & equipment, diesel engines, underground & above ground storage tanks (USTs & ASTs)
Type G (Gasoline) – Compatible with gasoline & ethanol blendsup to E10
Type D (Diesel) – Compatible with diesel, ULSD, biodiesel up toB100, fuel oil & marine
•••
Application
••••
FUEL TREATMENT
TYPES: Hydroburn Gasoline & Diesel
10.4
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS
HYDROBURN®
Part No. Type Description Treats Ctn. Wt.
NOTE: Do not use Hydroburn with aviation fuels. Keep out of reach of children. Harmful or fatal if swallowed. Avoid contactwith eyes or prolonged contact with skin. If swallowed call physician immediately. Avoid spillage on painted surfaces.
60061 Gasoline Fuel Treatment, 8 Oz. Bottles, 12 per carton 20 Gal. 7.5#
60062 Gasoline Fuel Treatment, 32 Oz. Bottles, 12 per carton 80 Gal. 25#
60063 Gasoline Fuel Treatment, 5 Gallon Pail 1,600 Gal. 42#
60064 Gasoline Fuel Treatment, 55 Gallon Drum 16,000 Gal. 456#
60065 Diesel Fuel Treatment, 8 Oz. Bottles, 12 per carton 60 Gal. 7.5#
60066 Diesel Fuel Treatment, 32 Oz. Bottles, 12 per carton 250 Gal. 25#
60067 Diesel Fuel Treatment, 5 Gallon Pail 5,000 Gal. 42#
60068 Diesel Fuel Treatment, 55 Gallon Drum 55,000 Gal. 456#
Eliminates water and water-related problems when applied correctly
Prevents phase separation in ethanol-blended fuel
Improves fuel quality & promotes morecomplete combustion
Guaranteed to be compatible with all Cim-Tek filters 5 Gallon Pail &
55 Gallon Drum
* Hydroburn Diesel additive complies with the federal low sulfur content requirements for use in motor vehicle and nonroad engines.
Application
Benefits
Design Features
Reverses phase separation in ethanol-blended fuel (Patent Pending)
Restores phase-separated fuel to previous ethanol amount &octane rating
Reduces the downtime of the dispenser pumps with the quick application and agitation process
Eliminates hazardous waste streams
Guaranteed to be compatible with all Cim-Tek filters
•••••
•••
Available in 55 gallon drums
Hydroburn PSR 55 gallon drum treats 5,000 gallons of phase-separated fuel
Designed specifically to treat ethanol blends
TYPE: Hydroburn PSR™
10.5
®
FUEL TREATMENT
HYDROBURNPSR™
Fuel Treatment for Ethanol-Blended Gasoline Only Part No. Type Description Ctn. Wt.
NOTE: Do not use Hydroburn PSR with aviation fuels. Keep out of reach of children. Harmful or fatal if swallowed. Avoid contact with eyes or prolonged contact with skin. If swallowed call physician immediately. Avoid spillage on painted surfaces.
60069 Ethanol-Blend (E10) Hydroburn PSR Fuel Treatment, 55 Gallon Drum 410#
For use with underground & above ground storage tanks (USTs & ASTs)
Compatible with ethanol-blended gasoline only
••
PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS