CE Certification - Owen Compliance Services, Inc. · Type of explosive: Electronic detonator...
Transcript of CE Certification - Owen Compliance Services, Inc. · Type of explosive: Electronic detonator...
COUNCIL DIRECTIVE 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses;
Version 1, February 2001
For the latest information please visit our web site
www.dynawell.de
CE Certification
Boosters
Detonating Cord
Detonators
Inside this issue:
Main Office: P.O. Box 1261 53822 Troisdorf Germany Tel: +49 2241 89 1594 Fax: +49 2241 89 1288 Email: [email protected]
HNS Det cord 1.4S 2425
PETN Det cord 1.1D 2427
FD Detonators 1.4B 2419
FD Detonators 1.4S 2434
T&P Detonators 1.1B 2436
T&P Detonators 1.4B 2420
T&P Detonators 1.4S 2435
Electronic Igniter Setting Tool
2494
HNS Percussion Ini-tiator 1.4B
2488
HNS Percussion Ini-tiator 1.4S
2520
BUNDESANSTALT FÜR MATERIALFORSCHUNG UND -PRÜFUNG(BAM)
EC Type Testing CertificateNo. 0589 EXP. 1563/99
Description of explosive(trade name): Instantaneous detonator DYNAWELL
1015E HMX
Type of explosive: Electronic detonator
Name (company) andaddress of manufacturer: Dynamit Nobel GmbH
Explosives and System EngineeringKaiserstrasse 153840 Troisdorf
As the agency named in article 6 par. 2 of council directive 93/15/EEC dated April 5,1993, for the harmonisation of regulations regarding the circulation and control ofexplosives for civilian use (Official Journal of the European Communities No. L 121,page 20), and
as the agency responsible for issuing EC type testing certificates for explosivesaccording to par. 12a, section 4 of the First Executive Order to the ExplosiveSubstances Act (1. SprengV), inserted on the basis of Article 2 of the Amendment tothe Explosive Substances Act and other regulations (SprengÄndG 1997) dated 23JUNE 1998 (BGBl. I, p. 1530),
the Bundesanstalt für Materialforschung und -prüfung (BAM) certifies that
the above-mentioned explosive (type specimen) conforms to the basic safetyrequirements in accordance with Appendix I of directive 93/15/EEC and therequirements for the composition and characteristics of explosives in accordance withAppendix 1a to the 1. SprengV.
The conformity of the manufactured products with the type specimen shall beensured by module D in accordance with Article 6, par. 1 of directive 93/15/EEC, par.12b, section 1 and Appendix 8 to the 1. SprengV.
Bundesanstalt für Materialforschung Page 2und -prüfung (BAM) of Type Testing Certificate
No. 0589.EXP.1563/99
The test results are contained in the confidential test report
No. P 1563/99.
These test results are evaluated in the confidential evaluation report
No. B 1563/99.
The data required for the identification of the above-mentioned explosive arecontained in Appendix 1 of this certificate.
The appropriate instructions to the above-mentioned explosive are contained inAppendix 2 of this certificate. This Appendix must be attached when forwarding thiscertificate.
The Bundesanstalt für Materialforschung und -prüfung must be made cognizant ofany changes in the composition and characteristics of the explosive.
This EC type testing certificate is valid in all member states of the European Union foran unlimited period.
Advice on legal relief:
This certificate can be objected to within a month of notification. The protest must besubmitted in writing or for the records to the Bundesanstalt für Materialforschung und-prüfung (BAM), Unter den Eichen 87, 12205 Berlin
Berlin, dated 14 MAR 2001
President ofBundesanstalt für Materialforschung und -prüfung
by order
(Official seal) (Dr. Eckhardt)
This EC Type Testing Certificate consists of 2 pages and 2 Appendices witha total of 2 pages.Certificates of Approval without an official seal are not valid.
BAM Unter den Eichen 87 D-12205 Berlin Tel. (030) 8104-0
BUNDESANSTALT FÜR MATERIALFORSCHUNG UND -PRÜFUNG(BAM)
Appendix 1to EC Type Testing Certificate
No. 0589. EXP. 1563/99
Description of explosive(trade name): Instantaneous detonator DYNAWELL 1015E HMX
Type of explosive: Electronic detonator
Jacket material: Copper
Weight of secondary charge: approx. 1300 mg of HMX
Weight of primary charge: approx. 250 mg of lead acid andapprox. 700 mg of HMX
The composition is stated in Appendix 1 of confidential test report No. P 1563/99.
BUNDESANSTALT FÜR MATERIALFORSCHUNG UND -PRÜFUNG(BAM)
Appendix 2to EC Type Testing Certificate
No. 0589. EXP. 1563/99
Description of explosive(trade name): Instantaneous detonator DYNAWELL 1015E HMX
Type of explosive: Electronic detonator
General safety instructions:
1. Use
Usability underground: only for deep drilling
Explosion proofness andcoal dust safety: no
Application temperature andmax. permissible hydrostaticpressure: max. 150 °C and 1000 bar for 1 hour
2. Storage: 2 years at temperatures ranging from 0 °Cto +40 °C
3. Destruction: Destroy detonator by blasting at an appropriate place (e. g.blasting ground, blasting chamber or bunker) in accordancewith local regulations.
BUNDESANSTALT FÜR MATERIALFORSCHUNG UND -PRÜFUNG(BAM)
EC Type Testing CertificateNo. 0589 EXP. 1562/99
Description of explosive(trade name): Instantaneous detonator DYNAWELL
0026FDE
Type of explosive: Electronic detonator
Name (company) andaddress of manufacturer: Dynamit Nobel GmbH
Explosives and System EngineeringKaiserstrasse 153840 Troisdorf
As the agency named in article 6 par. 2 of council directive 93/15/EEC dated April 5,1993, for the harmonisation of regulations regarding the circulation and control ofexplosives for civilian use (Official Journal of the European Communities No. L 121,page 20), and
as the agency responsible for issuing EC type testing certificates for explosivesaccording to par. 12a, section 4 of the First Executive Order to the ExplosiveSubstances Act (1. SprengV), inserted on the basis of Article 2 of the Amendment tothe Explosive Substances Act and other regulations (SprengÄndG 1997) dated 23JUNE 1998 (BGBl. I, p. 1530),
the Bundesanstalt für Materialforschung und -prüfung (BAM) certifies that
the above-mentioned explosive (type specimen) conforms to the basic safetyrequirements in accordance with Appendix I of directive 93/15/EEC and therequirements for the composition and characteristics of explosives in accordance withAppendix 1a to the 1. SprengV.
The conformity of the manufactured products with the type specimen shall beensured by module D in accordance with Article 6, par. 1 of directive 93/15/EEC, par.12b, section 1 and Appendix 8 to the 1. SprengV.
Bundesanstalt für Materialforschung Page 2und -prüfung (BAM) of Type Testing Certificate
No. 0589.EXP.1562/99
The test results are contained in the confidential test report
No. P 1562/99.
These test results are evaluated in the confidential evaluation report
No. B 1562/99.
The data required for the identification of the above-mentioned explosive arecontained in Appendix 1 of this certificate.
The appropriate instructions to the above-mentioned explosive are contained inAppendix 2 of this certificate. This Appendix must be attached when forwarding thiscertificate.
The Bundesanstalt für Materialforschung und -prüfung must be made cognizant ofany changes in the composition and characteristics of the explosive.
This EC type testing certificate is valid in all member states of the European Union foran unlimited period.
Advice on legal relief:
This certificate can be objected to within a month of notification. The protest must besubmitted in writing or for the records to the Bundesanstalt für Materialforschung und-prüfung (BAM), Unter den Eichen 87, 12205 Berlin
Berlin, dated 14 MAR 2001
President ofBundesanstalt für Materialforschung und -prüfung
by order
(Official seal) (Dr. Eckhardt)
This EC Type Testing Certificate consists of 2 pages and 2 Appendices witha total of 2 pages.Certificates of Approval without an official seal are not valid.
BAM Unter den Eichen 87 D-12205 Berlin Tel. (030) 8104-0
BUNDESANSTALT FÜR MATERIALFORSCHUNG UND -PRÜFUNG(BAM)
Appendix 1to EC Type Testing Certificate
No. 0589. EXP. 1562/99
Description of explosive(trade name): Instantaneous detonator DYNAWELL
0026FDE
Type of explosive: Electronic detonator
Jacket material: Aluminium
Weight of secondary charge: approx. 600 mg of HNS
The composition is stated in Appendix 1 of confidential test report No. P 1562/99.
BUNDESANSTALT FÜR MATERIALFORSCHUNG UND -PRÜFUNG(BAM)
Appendix 2to EC Type Testing Certificate
No. 0589. EXP. 1562/99
Description of explosive(trade name): Instantaneous detonator DYNAWELL
0026FDE
Type of explosive: Electronic detonator
General safety instructions:
1. Use
Usability underground: only for deep drilling
Explosion proofness andcoal dust safety: no
Application temperature: max. 260 °C for 1 hour
Max. permissible hydrostaticpressure: 0.3 Mpa
2. Storage: 2 years at temperatures ranging from 0 °Cto +40 °C
3. Destruction: Destroy detonator by blasting at an appropriate place (e. g.blasting ground, blasting chamber or bunker) in accordancewith local regulations.
BUNDESANSTALT FÜR MATERIALFORSCHUNG UND -PRÜFUNG(BAM)
EC Type Testing CertificateNo. 0589 EXP. 1561/99
Description of explosive(trade name): Instantaneous detonator DYNAWELL
0015FDE
Type of explosive: Electronic detonator
Name (company) andaddress of manufacturer: Dynamit Nobel GmbH
Explosives and System EngineeringKaiserstrasse 153840 Troisdorf
As the agency named in article 6 par. 2 of council directive 93/15/EEC dated April 5,1993, for the harmonisation of regulations regarding the circulation and control ofexplosives for civilian use (Official Journal of the European Communities No. L 121,page 20), and
as the agency responsible for issuing EC type testing certificates for explosivesaccording to par. 12a, section 4 of the First Executive Order to the ExplosiveSubstances Act (1. SprengV), inserted on the basis of Article 2 of the Amendment tothe Explosive Substances Act and other regulations (SprengÄndG 1997) dated 23JUNE 1998 (BGBl. I, p. 1530),
the Bundesanstalt für Materialforschung und -prüfung (BAM) certifies that
the above-mentioned explosive (type specimen) conforms to the basic safetyrequirements in accordance with Appendix I of directive 93/15/EEC and therequirements for the composition and characteristics of explosives in accordance withAppendix 1a to the 1. SprengV.
The conformity of the manufactured products with the type specimen shall beensured by module D in accordance with Article 6, par. 1 of directive 93/15/EEC, par.12b, section 1 and Appendix 8 to the 1. SprengV.
Bundesanstalt für Materialforschung Page 2und -prüfung (BAM) of Type Testing Certificate
No. 0589.EXP.1561/99
The test results are contained in the confidential test report
No. P 1561/99.
These test results are evaluated in the confidential evaluation report
No. B 1561/99.
The data required for the identification of the above-mentioned explosive arecontained in Appendix 1 of this certificate.
The appropriate instructions to the above-mentioned explosive are contained inAppendix 2 of this certificate. This Appendix must be attached when forwarding thiscertificate.
The Bundesanstalt für Materialforschung und -prüfung must be made cognizant ofany changes in the composition and characteristics of the explosive.
This EC type testing certificate is valid in all member states of the European Union foran unlimited period.
Advice on legal relief:
This certificate can be objected to within a month of notification. The protest must besubmitted in writing or for the records to the Bundesanstalt für Materialforschung und-prüfung (BAM), Unter den Eichen 87, 12205 Berlin
Berlin, dated 14 MAR 2001
President ofBundesanstalt für Materialforschung und -prüfung
by order
(Official seal) (Dr. Eckhardt)
This EC Type Testing Certificate consists of 2 pages and 2 Appendices witha total of 2 pages.Certificates of Approval without an official seal are not valid.
BAM Unter den Eichen 87 D-12205 Berlin Tel. (030) 8104-0
BUNDESANSTALT FÜR MATERIALFORSCHUNG UND -PRÜFUNG(BAM)
Appendix 1to EC Type Testing Certificate
No. 0589. EXP. 1561/99
Description of explosive(trade name): Instantaneous detonator DYNAWELL
0015FDE
Type of explosive: Electronic detonator
Jacket material: Aluminium
Weight of secondary charge: approx. 600 mg of RDX
The composition is stated in Appendix 1 of confidential test report No. P 1561/99.
BUNDESANSTALT FÜR MATERIALFORSCHUNG UND -PRÜFUNG(BAM)
Appendix 2to EC Type Testing Certificate
No. 0589. EXP. 1561/99
Description of explosive(trade name): Instantaneous detonator DYNAWELL
0015FDE
Type of explosive: Electronic detonator
General safety instructions:
1. Use
Usability underground: only for deep drilling
Explosion proofness andcoal dust safety: no
Application temperature: max. 150 °C for 1 hour
Max. permissible hydrostaticpressure: 0.3 Mpa
2. Storage: 2 years at temperatures ranging from 0 °Cto +40 °C
3. Destruction: Destroy detonator by blasting at an appropriate place (e. g.blasting ground, blasting chamber or bunker) in accordancewith local regulations.