Professional Lawn Care & Hire Machinery

BladeMachinery Limited

PROFESSIONAL MACHINES FOR A PROFESSIONAL FINISH

Aerator

2

BA-4 Air-Ject Aerator“Four In One”

Regular aeration encourages grass plant root systems to grow deeper and stronger, by increasing the supply ofoxygen, moisture and nutrients directly into the root zone, plus the ability to relive soil compaction, all therequirements needed for a healthy, beautiful lawn. Bannerman’s BA-4 Air-Ject Aerator is a commercial gradeself-propelled, walk behind machine that can be fitted with a total of three different tine configurations, Core,Fracture and Slitter plus an over seeding Spiker tine reel. Making the BA-4 a truly “Four in One” Aerator.

BA-4CT-H Core Tine

BA-4FT-HFracture Tine Aerator

Powered by a Honda GX120 engine fitted to a6:1 reduction gear reduction, gives the unit apowerful and reliable drive system

Bannerman’s BA-4 is a compact unit that allows easy and safe operation in confined areas, with less operatorfatigue. The tine reel assembly allows a smoother operation and more holes / slits per square metre. Ballastweights maintain maximum pressure for tine penetration and operator balance

Sample cores from a 1/2” closed tine

3

BA-4 Air-Ject

Limited access to some properties is a growing problem, making itdifficult to aerate in a cost effective way. Bannerman’s Easy AccessAerator has an overall width of 60cm making it one of the narrowestmachine available for lawn care companies.

BA-4M-CT - Easy Access Core Tine Aerator

Slitter Tine Reel Fitted with either3mm, 5mm or 8mm Slitter Blades

60 cm

Tines

Part No.

Material

Diameter/Thickness

Length

Number oftines per unit

Reachable depthof penetration

Aeration Pattern

Holes persquare meter

1/2” Core Tine

08063

HardenedSteel

1.25 cm1/2”

—

25

7.5 cm3”

10 x 27.5 cm4 “x 11”

36

3/4” Core Tine

08115

HardenedSteel

1.9 cm3/4”

25

7.5 cm3”

10 x 27.5 cm4” x 11”

36

Fracture Tine

08112

Drop ForgedSteel

1.25 cm1/2”

13.75 cm5.5”

20

12.5 cm5”

135 x 12.5 cm14 “ x 5”

18

Slitter Tine

08067

HardenedSurgical Steel

3 mm

13.75 cm 5.5”

25

12.5 cm5”

10 x 27.5 cm

36

Slitter Tine

08131

HardenedSurgical Steel

5 mm

13.75 cm 5.5”

25

12.5 cm5”

10 x 27.5 cm

36

—

4

Scarifier / De-Thatcher

Bannerman’s Kleen Green Scarifier / Thatch Remover is designed to provide an efficient vertical cuttingaction, to speedily remove dead plant material and other debris from the base of the grass plant a damagingcondition in grass lawns and fine turf areas. The removal of organic materials from the base of the grassplant allows water, oxygen and nutrients to circulate freely and be absorbed quickly into the root system

Fitted with 15 x 1.5 mm (1/16”) offset blades the B-LT-15-Hhas 30 cutting tips to reduce ridging and effectively prunethe grass, reducing lateral growth whilst encouraging verticalre-growth, removing thatch, controlling moss and preparingthe area for over seeding.

Built for the Professional Lawn Care Specialist,Bannerman’s Scarifier / De-Thatcher has beenused by many National UK Lawn TreatmentCompanies for the last ten years, the machinehas proved to be a good revenue earner,that gives years of trouble-free service.

Bannerman B-LT-14-H / 15-H / 27-H

Engine:Cutting Width:Wheels-Rear:

Wheels-Front:Weight:Drive Belt:Bearing:Blade:

Honda GC16045 cm /18”25.4 cm/10” Pneumatic with inner tube,heavy duty steel rims and grease nipple25 mm/1” bearingsSolid Roller58 kg3/8” Toothed Heavy Duty2 - piece eccentric lock bearing in cast flange(0.8 mm /1/32”) - (1.5 mm /1/16”) - (3.2 mm /1/8”)

Specifications:

Rotor blade shaft can be fitted with either:27 x 0.8 m/m Fine Blades15 x 1.5 m/m Standard Blades14 x 3.2 m/m Verti-Cut Blades

1/32” (0.8mm) 1/8” (3.3mm) 1/16” (1.5mm)

B-LT-15-H

Wheels fitted outboard as standard B-GT-15-H

5

B-LT-14-H / B-LT-15-H

B-GT-15-H Greens Thatcher is fitted with 15 x 0.8mm offsetblades to prevent tracking of the cutting tips and eliminatesridging, this is particularly important on bowling greenswhere a uniform smooth surface is essential, completewith a front roller fitted to replace the front wheels.

60 cm

Bannerman B-GT-15-H

Limited access into many properties is an increasing problem for many Lawn Care Professionals.

Bannerman have addressed this issue by adapting their Kleen GreenDe-Thatcher to give a maximum width of just 60 cm while retainingtheir standard blade operating width of 44 cm.

The B-GT-15-H has the same cutting width asthe standard model but with the added advantageof a front roller and inboard wheels, allowing themachine to be operated along the edge of thelawn,thus not having to finish the edgewith a rake, It also allows ease handling whereaccess space is at a premium but not reducingthe efficiency, the rear wheels can be returned totheir conventional out board position if required.

6

Top Dresser

B-MTD-SD Mini Top Dresser

Top Dressing with good organic matter after overseeding will ensure quicker germination of the grassseed, less loss of seed through birds feeding, this willcreate faster growth and thicker healthier grass plants

The Mini Topper is fitted with adjustable front and rearbrushes in between the hopper and drum, by opening orclosing the distance between the drum and the hopperwill control the flow rate of product to be applied.

A variety of top dressing products can spread usinga Bannerman Mini-Topper from composted gardenwaste (PAS100) through to fine silica sand. The hopperhas a capacity of 100 Lt .

Bannerman’s Mini-Topper is designed to apply top dressing quicklyand evenly on small to medium sized high wear turf grass areas andresidential lawns. Fitted with a wheel driven rubber coated spreadingdrum it has a spreading width of approximately 60 cm.

Virtually any area of natural grass can benefit from an application of goodrich organic top dressing at least once a year.

When larger areas require top dressing, the operation is made easy with the new Bannerman Powered TopDresser, with a hopper capacity of 178 litres the Bannerman Powered Top Dresser makes dressing theseareas more cost effective.

B-MTD-PT Power Top Dresser

Powered by a Honda GX120 engine coupled to 6:1 reduction gearbox.With a short turning circle allowing easy manoeuvrability, with the addedbenefit of the ability to lock the two front caster wheels allowingyou to traverse sloped areas.

Specifications:

Capacity:Weight:Height:Spread Width:Machine Width:

178 lt110 kg97 cm60 cm66 cm

Specifications:

Height:Width:Spreading Width:Weight:

60 cm89 cm60 cm30 kg

7

Rakes & Drag Mats

Bannerman Self Clearing Ski Rake

Self clearing Ski Rakes quickly and effortlessly collect scarification thatch into rows ready for bagging.Designed so that the rake head always stays on the ground, by drawing the rake towards you thethatch is collected, by pushing the rake away from you clears the thatch from the rake tines, thisaction also gives a secondary scarification to the lawn.Ski Rakes with their 2.5mm laser cut steel tines can also be used as a manual scarification wherethe use of powered machinery isn’t cost effective.

Two sizes are available:Large: 72cm with 40 laser cut & hardened steel tines 2.5mm thickStandard: 58cm with 32 laser cut & hardened steel tines 2.5mm thickHandle: 183cm (72”) wooden handle

Bannerman All Steel Drag MatsBannerman’s all steel Drag Mats, enable you to mat lawnand turf grass areas to break-up aeration cores, lightlylevel undulations and swirl in top dressing material.Fitted with a heavy duty draw chain and alloy handle,enables the user to hand draw or tow behind any smallturf vehicle, for ease of handling they can be “rolled-out”and “rolled-up” quickly.

Dimensions:0.90cm x 120cm (3’ x 4’)120cm x 180cm (4’ x 6’)

Blade Machinery LimitedPO Box 352CongletonCheshireCW12 9DDUK.

01260 278 79807530 951 009info@blademachinery.co.ukwww.blademachinery.co.uk

Phone:Mobile:E-mail:Web:

For more information or to book a demonstration please contact:

BladeMachinery Limited

Professional Lawn Care & Hire Machinery

Blade Machinery Ltd, Standard Terms & Condition are available upon request, all prices and specifications subject to change without prior notice. E&OE

Contact