CATIA - Electrical Harness Flattening 2 (EHF)
Transcript of CATIA - Electrical Harness Flattening 2 (EHF)
-
8/12/2019 CATIA - Electrical Harness Flattening 2 (EHF)
1/4
Equipment & Systems Engineering
CATIA - Electrical Harness Flattening 2 (EHF)
CATIA V5R18
-
8/12/2019 CATIA - Electrical Harness Flattening 2 (EHF)
2/4
2Copyright 2002-2004 Dassault Systemes - All rights reserved
Equipment & Systems Engineering
CATIA - Electrical Harness Flattening
Achieve flattening of Electrical Harnesses for extensive draftingproduction (i.e. manufacturing documentation).
Product overview
CATIA - Electrical Harness Flattening 2 (EHF)
provides user with flattening of 3D Electrical
Harnesses created with CATIA - Electrical
Harness Installation 2 (EHI) to produce 2D
associative drawings for inspection and
documentation purpose. CATIA - Electrical
Harness Flattening 2 (EHF) extracts 3D
Electrical data and provides a flattened view
of the Electrical Harness. User is provided
with a set of tools to manipulate bundle
segments in term of position to reach theadequate solution.
CATIA - Electrical Harness Flattening 2 (EHF)
enables user to generated also 3D flattened
view of his harness. Therefore, he can decide
that a bundle segment that is very rigid must
keep its original bended shape. 3D
Mechanical constraints defined with CATIA -
Electrical Harness Installation 2 (EHI) are
preserved, so that bend radius and length of
bundle segment are still constrained. Theproduct is fully integrated with CATIA -
Electrical Harness Installation 2 (EHI).
Besides, the natural integration with
Interactive Drafting 1 (ID1) allows user to
define and manage the relevant set of
annotations and dimensions to create full
reports for documentation.
Product Highlights
Provides automatic and complete
flattening of a 3D electrical harnesses for
manufacturing documentation
Allows users to manipulate bundle
segments according to theirspecifications
Synchronizes the flattening harness model
from the 3D model for accurate associativity
and concurrent engineering
Provides Filtering Management to deal
with configurations of 3D harness to
several relevant harness drawings through
integration with CATIA Electrical Wire
(EWR)
Integration with CATIA - Electrical Harness
Installation 2 (EHI) and Interactive Drafting 1(ID1) and Generative Drafting for
documentation purpose
Product Key Customers Benefits
Provides automatic Flattening of a 3D
Electrical Harness... The user can get the
flattening of his entire 3D Electrical Harness
model from a simple click.
Allows user to manipulated bundle
segments... The user is provided with a set
-
8/12/2019 CATIA - Electrical Harness Flattening 2 (EHF)
3/4
3Copyright 2002-2004 Dassault Systemes - All ri ghts reserved
of intuitive tools to manipulate bundle
segment to reach the optimized position of
each branch.
Synchronizes the flattening harness model
from the 3D model for accurate
and concurrent engineering... User can
reconcile his flattened view with the 3D
model to allow concurrent engineering.
This improves design productivity and
avoid inconsistencies between the two
representations.
Provides Filtering Management to deal
with configurations of 3D Harness to
several relevant Harness drawings...
Electrical Wire Routing 2 (EWR) gives user
the ability to manage different
configurations of Flattened harness
drawings from a single 3D Flattened
Harness
Integration with Electrical Harness
Installation 2 (EHI) and Interactive Drafting
(ID1) and Generative Drafting for
documentation purpose...
Other images
-
8/12/2019 CATIA - Electrical Harness Flattening 2 (EHF)
4/4
ABOUT CATIA V5R18
CATIA is Dassault Systemes' PLM solution for digital product definition and simulation.
plm.3ds.com/CATIA
For more information about our products visit plm.3ds.com/contact
Copyright 2002-2004 Dassault Systemes - All rights reserved