Catalogo ICP 11 2011 - Group Tech Valves... · 2012. 10. 3. · ATEX Certified . ITEM DESCRIPTION...

2

IndexFig. 140 Three Pieces Ball Valves Full Bore Threaded acc.: DIN 259/2999 (GAS) 4Fig. 141 Three Pieces Ball Valves Full Bore Threaded acc.: ASME B.1.20.1 (NPT) Fig. 142 Three Pieces Ball Valves Full Bore Socket Weld acc.: ASME B.16.11 & DIN 3239 part 2

Fig. 143 Three Pieces Ball Valves Full Bore Bu� Weld acc.: ASME B.16.11 & DIN 3239 part 2

Fig. 140 IMF Three Pieces Ball Valves Full Bore Threaded acc.: DIN 259/2999 (GAS) 5Fig. 141 IMF Three Pieces Ball Valves Full Bore Threaded acc.: ASME B.1.20.1 (NPT) Fig. 142 IMF Three Pieces Ball Valves Full Bore Socket Weld acc.: ASME B.16.11 & DIN 3239 part 2 6Fig. 143 IMF Three Pieces Ball Valves Full Bore Bu� Weld according: ASME B.16.11 & DIN 3239 part 2 Fig. TRP-900 Three Pieces Ball Valves Full Bore Class 900 7Fig. 150 2 Pieces Flanged End Ball Valves Full Bore PN 16 8FIG. 154 2 Pieces Flanged End Ball Valves Full Bore PN 40 9FIG. 156 2 Pieces Flanged End Ball Valves Full Bore PN 16 FIG. 254 2 Pieces Flanged End Ball Valves Full Bore PN 40 10-11 FIG. 256 2 Pieces Flanged End Ball Valves Full Bore PN 16 FIG. 254L 2 Pieces Flanged End Ball Valves Full Bore Long Pa� ern PN 40 12-13FIG. 256L 2 Pieces Flanged End Ball Valves Full Bore Long Pa� ern PN 16

FIG. 315 / 415 2 Pieces Flanged End Ball Valves Class 150 Full Bore 14-15FIG. 330 / 430 2 Pieces Flanged End Ball Valves Class 300 Full Bore

Fig. 160 One Piece Ball Valves Reduce Bore Threaded according: DIN 259/2999 (GAS) 16Fig. 176 Wafer Type Flange End Ball Valve Full Bore 17Fig. 2000 Brass Ball Valves 2 Ways Full Bore Threaded according: DIN 259/2999 (GAS) 18Fig- 2001 Two Pieces Ball Valves Full Bore Threaded according: DIN 259/2999 (GAS) 19Fig. 2001 IMF Two Pieces Ball Valves Full Bore Threaded according: DIN 259/2999 (GAS) 20Fig. 2000 3 Ways “L” Port Brass Ball Valves Full Bore Threaded according: DIN 259/2999 (GAS) 21Fig. 2000 3 Ways “T” Port Brass Ball Valves Full Bore Threaded according: DIN 259/2999 (GAS) 22Fig. VR 316 Disk Check Valve Wafer Type PN 40 23Fig. G150 RF / G300 RF Forged Globe Valves Class 150/300 Welded Flanges 24Fig. G800 Forged Globe Valves Class 800 Connec� ons (NPT) (SW) 25Fig. C150 RF / C300 RF Forged Gate Valves Class 150/300 Welded Flanges 26Fig. C800 Forged Gate Valves Class 800 Connec� ons (NPT) (SW) 27Fig. R150 RF / R300 RF Forged Check Valves Class 150/300 Welded Flanges 28Fig. R800 Forged Check Valves Class 800 Connec� ons (NPT) (SW) 29Fig. BGV116 / BGV210 / BGV225 / BGV340 Bellows Sealed Type Globe Valves Flanged End 30Fig. GV116 / GV340 Globe Valves Flanged End 31Fig. CH116 / CH340 Check Valves Flanged End 32Fig. S116 / S315 / S340 / S415 / S416 Flanged “Y” Type Strainer 33Fig. FS310/316/315 - FS410/416/415 Flanged Y-Type Fabricated Strainers 34Temporary Basket Strainers - Temporary Conical Strainers 35Fig. SP316 Centrifugal Separators 36Fig. BSQ Quick Opening Basket Strainers 37Fig. BS Basket Strainers Bolted Cover 38

Accessories 39

Para más información técnica consulten nuestra web www.icp-valves.com

To obtain full technical informa� on visit our website www.icp-valves.com

3

ICP VALVES S.A. fue fundada para cubrir las necesidades de un sector del mercado que demandaba una válvula de bajo cos-te con unos estándares de calidad controlados.

Disponemos de unos recursos técnicos y humanos altamente cuali� cados que nos permiten ofrecer las soluciones adecua-das para cada aplicación según las necesidades de cada cliente, controlando todo el proceso de diseño y producción de los ar-� culos que ICP comercializa de acuerdo con los procedimientos de asegura miento de la calidad ISO 9000.

Además, somos especialistas en realizar diseños y/o suminis-tros especiales según las especi� caciones de nuestros clientes y servicios de mantenimiento y reparación de todo � po de ele-mentos de control de � uidos.

Desde nuestros inicios nos propusimos como obje� vo � nal la total sa� sfacción de nuestros clientes. Con el esfuerzo y la pro-fesionalidad del equipo de ICP, proveedores y distribuidores lo estamos consiguiendo.

ICP VALVES S.A. was born to � ll a gap in the market which was calling for a low cost valve with a controlled quality.

We count upon highly quali� ed human and technical resour-ces which allow us to o� er the suitable solu� ons for every applica� on according to every customer’s needs, controlling the design and produc� on process for all products marketed by ICP, following the ISO 9000 quality assurance procedure.

Furthermore, we are specialist in designing specialty products according to customer speci� ca� ons and supplying mainte-nance or repair services for all kind of � ow control elements.

Since our beginning, the total sa� sfac� on of our clients was established as our � nal goal. And we are achieving it with the e� ort and support of our ICP team, our suppliers and our dis-tributors.

One Valve for Every Need

Más de 7.000 m² de almacen de producto acabado. More than 7.000 sq. mt. of � nish product warehouse.

Más de 250.000 unid. de producto acabado en stock.More than 250.000 units of � nished products in our warehouse.

Más de 5.000 m² de planta de montaje, pruebas e I+D.More than 5.000 sq. mt. of workshop.

ITEM DESCRIPTION MATERIAL1 Body ASTM A351 CF8M

2 Body connector ASTM A351 CF8M

3 Ball ASTM A351 CF8M

4 Stem AISI 316

5 Seat ring PTFE

6 Wrench AISI 304

7 Wrench Nut AISI 304

8 Wrench Washer AISI 304

9 Gland AISI 304

10 Gland packing PTFE

11 Stem thrust seal PTFE

12 Bolt AISI 304

13 Nut AISI 304

14 Washer AISI 304

15 Seat Gasket PTFE

16 Lock Device AISI 304

Threaded according:DIN 259/2999 (GAS)

Three Pieces Ball Valves 1000 WOG (69 bar) Size ¼” – 4” (DN 10 -100) Stainless Steel

FIG. 140 FULL BORE

PRESSURE & TEMPERATURE RATING

PART

S A

ND

MAT

ERIA

LS

PTFE SEATS

1/4” - 1”

1 1/4” - 1 1/2”

2”- 4”




4 Stem AISI 316

5 Seat ring PTFE

6 Wrench AISI 304



9 Gland AISI 304



12 Bolt AISI 304

13 Nut AISI 304

14 Washer AISI 304

15 Seat Gasket PTFE


SIZE R.G. NPTØ DSW

Ø DBW

Ø d L M HWeight

in Kg

Torque In NmAt di� eren� al

Pressure 69 bar

Kv Values in m³ /h

¼” (DN 10) ¼” ¼” 19 17,6 11,6 59 105 50 0,31 5,6 5,2

�" (DN 12) �" �" 22,5 22,5 12,7 59 105 50 0,35 5,6 6,0

½" (DN 15) ½" ½" 27 22,5 15 68,5 105 55 0,41 9 8,7

¾” (DN 20) ¾” ¾” 33 30,7 20 84 125 60 0,7 11,3 21,6

1” (DN 25) 1” 1” 40 34,5 25 89 158 72 1,2 14,7 30,3

1¼” (DN 32) 1¼” 1¼” 48,8 43,5 32 112 158 78 2 19,2 39,8

1½” (DN 40) 1½” 1½” 55 49,5 38 121 195 91 2,5 24,9 69,3

2” (DN 50) 2” 2” 67,2 61,5 53 146 195 105 3,7 45,2 95,2

2½” (DN 65) 2½” 2½” 86,4 76 65 165 245 127 7,4 73,2 268,4

3” (DN 80) 3” 3” 103 92 80 183 245 137 12,8 128,8 311,7

4” (DN 100) 4” 4” 130,7 115 100 232 320 172 23 165,4 710,0

Three Pieces Ball Valves Full Bore 1000 WOG (69 bar)

Fig. 140 Threaded according: DIN 259/2999 (GAS)Fig. 141 Threaded according: ASME B.1.20.1 (NPT)Fig. 142 Socket Weld according: ASME B.16.11 & DIN 3239 part 2 Fig. 143 Butt Weld according: ASME B.16.11 & DIN 3239 part 2

Size ¼” – 4” (DN 10 -100) Stainless Steel

ATEX Certified

Fig. 140 / 141 / 142 / 143

DIM

ENSI

ON

S


PART

S A

ND

MAT

ERIA

LS

4



FIG. 140 FULL BORE

PART

S A

ND

MAT

ERIA

LS

PTFE SEATS

1/4” - 1”

1 1/4” - 1 1/2”

2”- 4”




4 Stem AISI 316

5 Seat ring PTFE

6 Stem packing PTFE + 15% G.F.

7 Gland AISI 304

8 Thrust washer PTFE

9 Belleville AISI 304

10 Handle nut AISI 304

11 Stop plate AISI 304

12 Bolt AISI 304

13 Bolt Washer AISI 304

14 Bolt nut AISI 304

15 Handle AISI 304

16 Handel nut AISI 304


18 O-Ring FKM

2”

SIZER . G .

&

NPTØd L M H h1 h2 E n1x F1 øD1 n2x F2 øD2

Weightin Kg


Pressure 69 bar

Kv Values in m³ /h

¼” (DN 10) ¼” 11,5 63,5 112 73 37 8,5 9 4 x 6 36 4 x 7 50 0,59 4,9 5,2

�" (DN 12) �" 12,5 63,5 112 73 37 8,5 9 4 x 6 36 4 x 7 50 0,58 4,9 6,0

½" (DN 15) ½" 15 63,5 112 73 37 8,5 9 4 x 6 36 4 x 7 50 0,57 4,9 8,7

¾” (DN 20) ¾” 20 72,5 112 80,8 45 8,5 9 4 x 6 36 4 x 7 50 0,71 6,5 21,6

1” (DN 25) 1” 25 81 136 90,5 53,5 11,4 9 4 x 6 36 4 x 7 50 1,03 13,7 30,3

1¼” (DN 32) 1¼” 32 94,5 185 98,7 59 11,4 9 4 x 6 36 4 x 7 50 1,56 21,6 39,8

1½” (DN 40) 1½” 38 108 197,9 115,3 74,8 14 14 4 x 7 50 4 x 9 70 2,5 29,5 69,3

2” (DN 50) 2” 50 121,5 197,9 124 83,5 13,7 14 4 x 7 50 4 x 9 70 3,44 47 95,2

2½” (DN 65) 2½” 65 157,5 264 155 108,8 18 17 4 x 9 70 4 x 11 102 6,4 58,3 268,4

3” (DN 80) 3” 80 190 264 208,5 118,3 18 17 4 x 9 70 4 x 11 102 11,2 86,8 311,7

4” (DN 100) 4” 100 225 325 216,7 153,8 18 17 4 x 9 70 4 x 11 102 22 122,6 710,0

Fig. 140 IMF / 141 IMF

DIM

ENSI

ON

S


FIG. 140 GAS FIG. 141 NPT

PART

S A

ND

MAT

ERIA

LS

T

4

1

”

PTFE SEATS

1/4” - 1”

1 1/4” - 1 1/2”

2”- 4”

5


ISO Mounting FlangeFig. 140 IMF Threaded according: DIN 259/2999 (GAS)Fig. 141 IMF Threaded according: ASME B.1.20.1 (NPT)


ATEX Certified




4 Stem AISI 316

5 Seat ring PTFE

6 Wrench AISI 304



9 Gland AISI 304



12 Bolt AISI 304

13 Nut AISI 304

14 Washer AISI 304

15 Seat Gasket PTFE




FIG. 140 FULL BORE

PART

S A

ND

MAT

ERIA

LS




4 Stem AISI 316

5 Seat ring PTFE

6 Wrench AISI 304



9 Gland AISI 304



12 Bolt AISI 304

13 Nut AISI 304

14 Washer AISI 304

15 Seat Gasket PTFE


Fig. 142 IMF / 143 IMF


PART

S A

ND

MAT

ERIA

LS

PTFE SEATS

1/4” - 1”

1 1/4” - 1 1/2”

2”- 4”

6


ISO Mounting FlangeFig. 142 IMF Socket Weld according: ASME B.16.11 & DIN 3239 part 2Fig. 143 IMF Butt Weld according: ASME B.16.11 & DIN 3239 part 2


ATEX Certified

SIZE ØdØ DØ S

BWØ D

L1 L M H h1 h2 En 1 x

F1øD1 n2x F2 øD2

Weightin Kg


Pressure 69 bar

Kv Values in m³ /h

¼” (DN 10) 11,5 14,2 14,5 10 63,5 112 73 37 8,5 9 4 x 6 36 4 x 7 50 0,59 4,9 5,2

�" (DN 12) 12,5 17,5 17,1 10 63,5 112 73 37 8,5 9 4 x 6 36 4 x 7 50 0,58 4,9 6,0

½" (DN 15) 15 21,8 21,3 10 63,5 112 73 37 8,5 9 4 x 6 36 4 x 7 50 0,57 4,9 8,7

¾” (DN 20) 20 27,4 26,7 13 72,5 112 80,8 45 8,5 9 4 x 6 36 4 x 7 50 0,71 6,5 21,6

1” (DN 25) 25 34,1 33,4 13 81 136 90,5 53,5 11,4 9 4 x 6 36 4 x 7 50 1,03 13,7 30,3

1¼” (DN 32) 32 42,7 42,2 13 94,5 185 98,7 59 11,4 9 4 x 6 36 4 x 7 50 1,56 21,6 39,8

1½” (DN 40) 38 49 48,3 13 108 197,9 115,3 74,8 14 14 4 x 7 50 4 x 9 70 2,5 29,5 69,3

2” (DN 50) 50 61 60,3 16 121,5 197,9 124 83,5 13,7 14 4 x 7 50 4 x 9 70 3,44 47 95,2

2½” (DN 65) 65 77 73 16 157,5 264 155 108,8 18 17 4 x 9 70 4 x 11 102 6,4 58,3 268,4

3” (DN 80) 80 90,2 88,9 16 190 264 208,5 118,3 18 17 4 x 9 70 4 x 11 102 11,2 86,8 311,7

4” (DN 100) 100 115,3 114,3 22 225 325 216,7 153,8 18 17 4 x 9 70 4 x 11 102 22 122,6 710,0

FIG. 142 SW FIG. 143 BW

PTFE SEATS

1/4” - 1”

1 1/4” - 1 1/2”

2”- 4”

3 Piece Ball Valves Full Bore Class 900 #

Valves Design: ASME B 16.34

Carbon Steel & Stainless Steel Connections: BSP, NPT or SW END

Fire Safe Certified acc. ISO 10497-2004Fugitive Emision Certified acc. ISO 15848-1 2006

ATEX Certified

Fig. TRP-900

7

ITEM DESCRIPTIONMATERIAL

CARBON STEEL STAINLESS STEEL

1 Body A 216 WCB A 351 CF8M

2 End Connector A 216 WCB A 351 CF8M

3 Ball A 351 CF8M

4 Stem A 476 TP316

5 Seat ring PTFE+CG

6 Wrench Z.P. Carbon Steel

7 Gland nut Z.P. Carbon St. AISI 316

8 Disk Spring Carbon Steel E.N.P. Carbon St.

10 Gland AISI 316

11 Gland packing Graphite

12 Stem trhust seal 25%Graphite

13 Body connector seal PTFE

13.1 Body connector seal Graphite

14 Stop pin Stainless Steel

15 Nut ASTM A 194 2H ASTM A 194 Gr.8

19 An� sta� c device Stainless Steel

28 Stud ASTM A 193 B7 ASTM A 193 B8

46 Locking washer Stainless Steel

DN A B C Ø D E Ø F G H I Nº x J Ø K

1/4” 68 59 43 9,5 170 36 8,7 10,7 7 4xM5 10

3/8" 68 59 43 9,5 170 36 8,7 10,7 7 4xM5 10

½" 72 59 45 15 110 36 8,7 10,7 7 4xM5 10

3/4" 94 68 59 20 175 42 15,7 17,7 9,5 4xM5 12

1" 106 72 62 25 175 42 15,7 17,7 9,5 4xM5 12

1½" 125,5 59 89 40 197 50 25,2 27,2 9,5 4xM6 16

2" 128 111 89 50 278 50 16,5 18 12 4xM6 18

DIM

ENSI

ON

S


PART

S A

ND

MAT

ERIA

LS

Pressure-TemperatureA 216 WCB

PTFE + C.G. SEATS

Pressure-TemperatureA 351 CF8M

PTFE + C.G. SEATS

ITEM DESCRIPTION MATERIAL1 Body EN-GJL-250

2 Body connector EN-GJL-250

3 Ball DN 15 to 25: AISI 303 DN 32 to 200: AISI 304

4 Stem AISI 304

5 Seat ring PTFE

6 Wrench Carbon steel



15 Bolt DIN 933 5.6

16 Bolt DIN 933 5.6

17 Washer Zinc plated carbon steel

72 "0" Ring FKM

471 Washer DIN 471Carbon St.

912 Bolt DIN 912 8.8

934 Nut DIN 934 8

DN ØP L L1 ØQ ØR n x ØS ØT X Y h M H VWeight

in Kg


Pressure 16 bar

Kv Values in m³ /h

15 (½”) 13 115 49 45 65 4x14 95 2 12 48,5 170 92 2,12 2,12 6 37,4

20 (¾”) 17 120 55,5 58 75 4x14 105 2 14 53 170 95,5 2,72 2,72 6 74,8

25 (1”) 24 125 51,5 68 85 4x14 115 2 14 59,5 170 102,2 3,62 3,62 11 105

32 (1¼”) 31 130 53 78 100 4x18 140 2 14 72 170 114,7 5,32 5,32 12 176

40 (1½”) 38 140 61 88 110 4x18 150 3 13 77 302,5 119 6,9 6,9 26 223

50 (2”) 50 150 62 102 125 4x18 165 3 15 85 302,5 127 9 9 41 416

65 (2½”) 65 170 81,5 122 145 4x18 (**) 185 3 15 98 224 141 11,68 11,68 41 660

80 (3”) 80 180 79 138 160 8x18 200 3 17 108,5 335 151,5 14,68 14,68 71 1200

100 (4”) 100 190 94 158 180 8x18 220 3 17 134 350 176,5 20,23 20,23 119 1980

125 (5”) 125 325 120,5 188 210 8x18 250 3 19 165 350 208 33,73 33,73 190 3600

150 (6”) 150 350 155 212 240 8x22 285 3 19 190 500 254,5 49,77 49,77 220 5040

200 (8”) 200 400 190 268 295 12x22 340 3 21 229 500 293,5 81,77 81,77 450 10890

2 Pieces Flanged End Ball Valves Full Bore PN 16

Valves Design: DIN 3357

Cast Iron

ATEX Certified

Fig. 150

DIM

ENSI

ON

S

PART

S A

ND

MAT

ERIA

LS

8


Depending on FKM Resistance to the Fluid

ITEM DESCRIPTION MATERIAL1 Body 1.4408

2 Cap 1.4408

3 Ball 1.4408

4 Stem AISI 316

5 Gasket PTFE

6 Seat RPTFE


8 Packing PTFE

8.1 Stem Packing (DN-125 TO DN-200) PTFE

9 Gland AISI 304

9.1 Gland (DN-125 TO DN-200) 14.308

10 Stem washer AISI 304

10,1 Snap ring (DN-125 TO DN-200) AISI 304

11 Stem nut AISI 304

12 Handle AISI 304

13 Bolt AISI 304

14 Handle sleeve Plas� c

15 Locking device AISI 304

16 An� esta� c device STAINLESS STEEL

17 Gland Bolt (DN-125 TO DN-200) ASTM 193 Gr.B8

18 Stopper (DN-125 TO DN-200) AISI 304

DN ØP L ØQ ØR n x ØS ØT X Y H MWeight

in Kg


Pressure 40 bar

Kv Values in m³ /h

15 15 115 45 65 4 x 14 95 2 14 72 123 2,38 7 22,3

20 20 120 58 75 4 x 14 105 2 16 76 123 3 7 42,8

25 25 125 68 85 4 x 14 115 2 16 92 182 3,7 11 80,5

32 32 130 78 100 4 x 18 140 2 16 95 152 5,6 17,6 102,8

40 40 140 88 110 4 x 18 150 3 15 125 246 9,24 38,5 222,8

50 50 150 102 125 4 x 18 165 3 17 132 246 9,42 55 411,3

DN ØP L ØQ ØR n x ØS ØT X Y H MWeight

in Kg


Pressure 16 bar

Kv Values in m³ /h

65 65 170 122 145 4 x 18 185 2 16 135 301 12,8 66 642,7

80 80 180 138 160 8 x 18 200 2 18 153 301 16,4 71,5 1114

100 98 190 158 180 8 x 18 220 2 18 194 285 23,7 77 1970

125 125 325 188 210 8 x 18 250 3 19 260 750 43,5 143 3856

150 150 350 212 240 8 x 22 285 3 19 280 750 54,8 176 4627

200 200 400 268 295 12 x 22 340 3 21 340 1000 93 495 8568

2 Pieces Flanged End Ball Valves Full Bore

FIG. 154 PN 40 (From DN 15 to DN 50)

FIG. 156 PN 16 (From DN 65 to DN 200)Valves Design: DIN 3357

Stainless Steel

ATEX Certified

FIG

. 154

PN

40

FIG

. 156

PN

16

DIM

ENSI

ON

S

PART

S A

ND

MAT

ERIA

LS

Fig. 154 / 156

9

2 Piece Flanged End Ball Valves PN 16 - PN 40Full Bore

Valves Dessign: EN 1983 ISO 17292Carbon Steel and Stainless Steel

Fire Safe Certified acc. ISO 10497 : 2004Fugitive Emision Certified acc. ISO 15848-1: 2006

ATEX Certified

10

Fig. 256 / 254

Item Descrip� onMaterial

AIT IIT

1 Body 1.0619 1.4408

2 Body connector 1.0619 1.4408

3 Ball A 351 Gr. CF8M (DN-15 ~ 25 A 479 Tp.316)

4 Seat ring TFM - 1600

5 Stem A 479 Tp.316

6 Stem thrust seal 25% G.F. PTFE

7 "O" Ring FKM


9 Gland AISI 303

10 Disk spring AISI 303

11 Locking washer AISI 304

12 Gland nut AISI 303

12.1 Nut AISI 303

13 An� fric� on washer 25% G.F. PTFE

14 Wrench Nodular Iron

15 Stud A 193 Gr. B7M A 193 Gr. B8M

16 Nut A 194 Gr. 2HM A 194 Gr. 8M

17 Spiralwound AISI 316L + PTFE + Graphite

18 Bolt A2

19 Iden� � ca� on plate Stainless St.

PART

S A

ND

MAT

ERIA

LS

DIMENSIONS PN 40

DN ØP L L1 ØQ ØR n x ØS ØT X Y h N H MWeight

in Kg15 15 115 53 45 65 4 x 14 95 2 14 41 31 68 170 2,4

20 20 120 52 58 75 4 x 14 105 2 16 43 33 70 170 3,2

25 25 125 52 68 85 4 x 14 115 2 16 58,5 39 86 170 4,1

32 32 130 54 78 100 4 x 18 140 2 16 63,5 43 89,5 170 5,8

40 40 140 55 88 110 4 x 18 150 2 16 86,5 48 122,5 200 8,1

50 50 150 61 102 125 4 x 18 165 2 18 91,5 63 127,5 200 10,6

65 65 170 72 122 145 8 x 18 185 2 20 104 78 140 350 14,8

80 78 180 73 138 160 8 x 18 200 2 22 118,5 87 190 450 20,6

100 100 190 83 158 190 8 x 22 235 2 22 144 108 192,5 466 29,2

125 125 325 120 188 220 8 x 26 270 2 24 184 134 240 775 53,6

150 151 350 135 212 250 8 x 26 300 2 26 203 152 259 775 74,7

T

11

DIMENSIONS PN 16


in Kg65 65 170 72 122 145 4 x 18 185 2 16 104 78 140 350 13,3

80 78 180 73 138 160 8 x 18 200 2 18 118,5 87 190 450 19,1

100 100 190 83 158 180 8 x 18 220 2 18 144 108 192,5 466 25,6

125 125 325 120 188 210 8 x 18 250 2 20 184 134 240 775 47,6

150 151 350 135 212 240 8 x 22 285 2 20 203 152 259 775 63,5

200 203 400 200 268 295 12 x 22 340 2 21 250 202 319 845 115,3

PN 40

DNTorque In NmAt di� eren� al

Pressure 40 bar

Kv Values in m³ /h

DN 15 8 20

DN 20 12 40

DN 25 14 75

DN 32 22 130

DN 40 27 170

DN 50 50 270

DN 65 74 550

DN 80 118 1000

DN 100 136 1650

DN 125 204 3000

DN 150 408 4200

PN 16


Pressure 16 bar

Kv Values in m³ /h

DN 65 51 550

DN 80 77 1000

DN 100 116 1650

DN 125 159 3000

DN 150 215 4200

DN 200 493 9000

DN ISO 5211 B C ØD n x F I J15 F 05 18 11 50 4 x M6 M10 7

20 F 05 18 11 50 4 x M6 M10 7

25 F 05 22 21 50 4 x M6 M12 8

32 F 05 22 21 50 4 x M6 M12 8

40 F 07 33 32 70 4 x M8 M18 12

50 F 07 33 32 70 4 x M8 M18 12

65 F 07 34 33 70 4 x M8 M22 15

80 F 10 34 33 102 4 x M10 M22 15

100 F 10 45 43,5 102 4 x M10 M28 19

125 F 12 56 54,5 125 4 x M12 M3 6 24

150 F 12 56 54,5 125 4 x M12 M36 24

200 F 14 69 67 140 4 x M16 M48 32

ACTU

ATO

R CO

NN

ECTI

ON


The Glare

2 Piece Flanged End Ball Valves PN 16 - PN 40Full Bore Long Pattern

Valves Dessign: EN 1983 ISO 17292Carbon Steel and Stainless Steel


ATEX Certified

12

Fig. 256L / 254L


AIT IIT

1 Body 1.0619 1.4408

2 Body connector 1.0619 1.4408



5 Stem A 479 Tp.316


7 "O" Ring FKM


9 Gland AISI 303

10 Disk spring AISI 303



12.1 Nut AISI 303




16 Nut A 194 Gr. 2HM A 194 Gr. 8M


18 Bolt A2


PART

S A

ND

MAT

ERIA

LS

DIMENSIONS PN 40


in Kg15 15 130 53 45 65 4 x 14 95 2 14 41 31 68 170 2,6

25 25 160 52 68 85 4 x 14 115 2 16 58,5 39 86 170 4,3

32 32 180 54 78 100 4 x 18 140 2 16 63,5 43 89,5 170 6

40 40 200 55 88 110 4 x 18 150 2 16 86,5 48 122,5 200 8,6

50 50 230 61 102 125 4 x 18 165 2 18 91,5 63 127,5 200 11,5

13

DIMENSIONS PN 16


in Kg65 65 290 72 122 145 4 x 18 185 2 16 104 78 140 350 15,2

80 78 310 73 138 160 8 x 18 200 2 18 118,5 87 190 450 21,2

100 100 350 83 158 180 8 x 18 220 2 18 144 108 192,5 466 29,2

PN 40


Pressure 40 bar

Kv Values in m³ /h

DN 15 8 20

DN 25 14 75

DN 32 22 130

DN 40 27 170

DN 50 50 270

PN 16


Pressure 16 bar

Kv Values in m³ /h

DN 65 51 550

DN 80 77 1000

DN 100 116 1650

DN ISO 5211 B C ØD n x F I J15 F 05 18 11 50 4 x M6 M10 7

25 F 05 22 21 50 4 x M6 M12 8

32 F 05 22 21 50 4 x M6 M12 8

40 F 07 33 32 70 4 x M8 M18 12

50 F 07 33 32 70 4 x M8 M18 12

65 F 07 34 33 70 4 x M8 M22 15

80 F 10 34 33 102 4 x M10 M22 15

100 F 10 45 43,5 102 4 x M10 M28 19

100 F 10 45 43,5 102 4 x M10 M28 19

ACTU

ATO

R CO

NN

ECTI

ON


2 Piece Flanged End Ball Valves PN 20/50 (Class 150/300) Full Bore

Valves Dessign: ASME B16.34

Carbon Steel and Stainless Steel


ATEX Certified

14

Fig. 315 / 330 / 415 / 430


AIT IIT

1 Body A 216 Gr. WCB (C � 0,25) A 351 Gr. CF8M

2 Body connector A 216 Gr. WCB (C � 0,25) A 351 Gr. CF8M



5 Stem A 479 Tp.316


7 "O" Ring FKM


9 Gland AISI 303

10 Disk spring E.N.P. Carbon St.



12.1 Nut AISI 303




16 Nut A 194 Gr. 2HM A 194 Gr. 8M


18 Bolt A2


PART

S A

ND

MAT

ERIA

LS

DIMENSIONS CLASS 150


in Kg15 (½”) 15 108 47 35 60,45 4 x 15,74 88,9 1,6 9,6 41 31 68 170 1,7

20 (¾") 20 117 50 43 69,8 4 x 15,74 98,5 1,6 9,6 43 33 70 170 2,2

25 (1") 25 127 52 51 79,24 4 x 15,74 108 1,6 9,6 58,5 39 86 170 2,9

40 (1½”) 40 165 65 73 98,55 4 x 15,74 127 1,6 12,7 86,5 48 122,5 200 6

50 (2”) 50 178 61 92 120,65 4 x 19 152 1,6 14,2 91,5 63 127,5 200 8,5

65 (2½”) 65 190 75 105 139,7 4 x 19 178 1,6 16 104 78 140 350 13,3

80 (3”) 78 203 78,5 127 152,4 4 x 19 191 1,6 17,4 118,5 87 190 450 18,5

100 (4”) 100 229 90 157 190,5 8 x 19 229 1,6 22,3 144 108 192,5 466 29,3

150 (6”) 151 394 174 216 241,3 8 x 22,2 279,5 1,6 23,9 203 152 259 775 64,5

200 (8”) 203 457 209 270 298,45 8 x 22,2 343 1,6 26,9 250 202 319 845 123,2

For A216 Gr. WCB only. For other materials consult ASME B16.34

PN 20 (Class 150)

PN 50 (Class 300)

T

15

DIMENSIONS CLASS 300

CLASS 150


Pressure 20 bar

Kv Values in m³ /h

15 (½”) 6 20

20 (¾") 8 40

25 (1") 12 75

40 (1½”) 22 170

50 (2”) 36 270

65 (2½”) 50 550

80 (3”) 79 1000

100 (4”) 130 1650

150 (6”) 220 4200

200 (8”) 630 9000

CLASS 300


Pressure 50 bar

Kv Values in m³ /h

15 (1/2") 10 20

20 (3/4”) 13 40

25 (1”) 17 75

40 (1 1/2”) 30 170

50 (2”) 49 270

80 (3”) 135 1000

100 (4”) 170 1650

150 (6”) 308 4200

200 (8”) 780 9000

DN ISO 5211 B C ØD n x F I J15 (½”) F 05 18 11 50 4 x M6 M10 7

20 (¾") F 05 18 11 50 4 x M6 M10 7

25 (1") F 05 22 21 50 4 x M6 M12 8

40 (1½”) F 07 33 32 70 4 x M8 M18 12

50 (2”) F 07 33 32 70 4 x M8 M18 12

65 (2½”) F 07 34 33 70 4 x M8 M22 15

80 (3”) F 10 34 33 102 4 x M10 M22 15

100 (4”) F 10 45 43,5 102 4 x M10 M28 19

150 (6”) F 12 56 54,5 125 4 x M12 M36 24

200 (8”) F 14 69 67 140 4 x M16 M48 32

ACTU

ATO

R CO

NN

ECTI

ON



in Kg15 (½”) 15 140 60 35 66,55 4 x 15,74 95 1,6 12,7 41 31 68 170 2,4

20 (¾") 20 152 65 43 82,55 4 x 19 117,5 1,6 14,2 43 33 70 170 3,5

25 (1") 25 165 70 51 88,9 4 x 19 124 1,6 16 58,5 39 86 170 4,6

40 (1½”) 40 190 80 73 114,3 4 x 22,2 155,5 1,6 19 86,5 48 122,5 200 9,2

50 (2”) 50 216 83 92 127 8 x 19 165 1,6 20,8 91,5 63 127,5 200 11,5

65 (2½”) 78 283 118 127 168,1 8 x 22,2 210 1,6 26,9 118,5 87 190 450 25

80 (3”) 100 305 133 157 200,15 8 x 22,2 254 1,6 30,2 144 108 192,5 466 39,5

100 (4”) 151 403 160 216 169,75 12 x 22,2 318 1,6 35 203 152 259 775 88,1

150 (6”) 203 502 239 270 330,2 12 x 25,43 381 1,6 39,6 250 202 319 845 160,5

200 (8”) 203 457 209 270 298,45 8 x 22,2 343 1,6 26,9 250 202 319 845 123,2


2 Insert AISI 316


4 Stem AISI 316

5 Seat ring PTFE + 15% G.F.

6 Wrench AISI 304

10 Gland AISI 304

11 Gland packing PTFE + 15% G.F.



17 Thrust Washer AISI 304

SIZE R.G. Ø d L M HWeight

in KgKv Values in m³ /h

¼” (DN 10) ¼” 5 38,3 61 28,8 0,07 3,24

�" (DN 12) �" 7,2 43,5 86 33,5 0,12 3,41

½" (DN 15) ½" 9 55,9 110 63,3 0,20 3,81

¾” (DN 20) ¾” 12,5 58,3 110 62 0,29 7,67

1” (DN 25) 1” 15 69,8 121 6,7 0,43 13,65

1¼” (DN 32) 1¼” 20 77,1 146 82,6 0,71 20,47

1½” (DN 40) 1½” 25 82,7 146 82,6 0,84 31,56

2” (DN 50) 2” 32 96,9 152 87,4 1,35 58,1

ONE Piece Ball Valves Reduced Bore 1000 WOG (69 bar)

Threaded according: DIN 259/2999 (GAS)


ATEX Certified

Fig. 160

DIM

ENSI

ON

S


PART

S A

ND

MAT

ERIA

LS

16

PART

S A

ND

MAT

ERIA

LS


2 Seal PTFE

3 Retainer 1.4408

4 Seat PTFE

5 Ball 1.4408

6 Stem AISI 316

7 Thrust Washer PTFE

8 Stem washer PTFE

9 Stop pin AISI 304

10 Gland ring AISI 304

11 Belleville disc AISI 301

12 Handle nut AISI 304

13 Handle AISI 304

14 Stem nut AISI 304

15 Handle sleeve Plas� c

19 An� sta� c device Stainless Steel

DN øP L øQ øR øS øT X Y h H M Weight

in Kg


Pressure 16 bar

Kv Values in m³ /h

15 16 35 45 65 M12 90 2 14 32 57 116 0,95 4 10

20 20 38 58 75 M12 100 2 16 35 64 116 1,5 7,4 25

25 25 44 65 85 M12 110 2 16 40 68 165 1,93 8 35

32 32 54 78 100 M16 130 2 16 49 85 165 3,2 10,8 46

40 38 62 88 110 M16 150 3 16 52 89 193 4,8 15,7 80

50 50 80 102 125 M16 150 3 18 62 98 193 5,52 20 110

65 64 101 122 145 M16 178 3 18 80 129 235 9,28 23 310

80 76 118 138 160 M16 190 3 20 88 138 235 12,6 33 350

100 96 150 158 180 M16 220 3 20 105 164 329 19 61,3 720

Wafer Type Flanged End Ball Valve Full Bore PN 16

Valves Design: DIN 3357

Size DN 15 – DN 100 Stainless Steel

ATEX Certified

Fig. 176

DIM

ENSI

ON

S


P Bar

Temp ºC

PN 16

PN16

17

ITEM DESCRIPTION MATERIAL1 Body Connector NICKEL PLATED BRASS 58

2 Body NICKEL PLATED BRASS 58

3 Ball Cr-Ni PLATED BRASS 58

4 Stem PLATED BRASS 58

5 Seat ring PTFE

6 Wrench Fe 50 DACROMET

7 Gland Nut NICKEL PLATED BRASS 58

8 Seal Ring PTFE

37 Seal Cover NBR


in Kg


Pressure

Kv Values in m³ /h

¼” (DN 10) ¼” 9,8 51,5 85 43 0,12 2 (40 bar) 5,2

�" (DN 12) �" 9,8 51,5 85 43 0,13 2,7 (40 bar) 5,6

½" (DN 15) ½" 14 62 95 46,3 0,2 5,4 (40 bar) 15,6

¾” (DN 20) ¾” 19 70 95 50 0,36 8 (40 bar) 25,1

1” (DN 25) 1” 24 84 110 58 0,53 10 (40 bar) 44,2

1¼” (DN 32) 1¼” 31 98 110 70 0,87 14 (25 bar) 66,7

1½” (DN 40) 1½” 38 106 140 78 1,1 20 (25 bar) 133,3

2” (DN 50) 2” 49 126 160 94 1,8 33 (25 bar) 173,2

2½” (DN 65) 2½” 64 149 210 122 4 47,4 (16 bar) 334,2

3” (DN 80) 3” 74 173,4 210 130 5,5 80 (16 bar) 519,5

Brass Ball Valves 2 Ways Full Bore


Size ¼” – 3” (DN 10 -80) OPTIONS:

� NPT Threaded Acc. Asme B1.20-1

� Butterfly Handle

� Degreased

ATEX Certified

Fig. 2000

DIM

ENSI

ON

S


PART

S A

ND

MAT

ERIA

LS

18




4 Stem AISI 316

5 Seat ring PTFE

6 Wrench AISI 304


10 Gland AISI 304




17 Washer AISI 304

66 Loocking device AISI 304


in Kg


Pressure 69 bar

Kv Values in m³ /h

¼” (DN 10) ¼” 11,2 50 100 50 0,23 4 5,7

�" (DN 12) �" 12,5 50 100 50 0,22 4,1 6,8

½" (DN 15) ½" 15 58 100 52 0,26 5,5 9,7

¾” (DN 20) ¾” 20 65 115 57 0,47 7,5 18,2

1” (DN 25) 1” 25 80 150 75 0,65 10,6 30,3

1¼” (DN 32) 1¼” 32 92 150 80 1,15 13,8 49,4

1½” (DN 40) 1½” 40 105 180 95 1,65 18,4 69,3

2” (DN 50) 2” 50 125 180 102 2,75 25,5 128,1

2½” (DN 65) 2½” 65 155 245 120 4,9 49 229,4

3” (DN 80) 3” 80 187 245 130 7,7 76,5 359,3

Two Pieces Ball Valves Full Bore1000 WOG (69 bar)


Size ¼” – 3” (DN 10 - 80) Stainless Steel

ATEX Certified

Fig. 2001

DIM

ENSI

ON

S


PART

S A

ND

MAT

ERIA

LS

1/4” - 1”

1 1/4” - 1 1/2”

2”- 3”

19

20

Two Pieces Ball Valves Full Bore 1000 WOG (69 bar)

ISO Mounting Flange


Size ¼” – 3” (DN 10 - 80) Stainless Steel

ATEX Certified

DIM

ENSI

ON

S

PART

S A

ND

MAT

ERIA

LS

Fig. 2001 IMF




4 Stem AISI 316

5 Seat ring PTFE

6 Gasket PTFE

7 Stem Packing PTFE


9 Gland Bushing AISI 304

10 Belleville washer AISI 304

11 Thrust washer PTFE + 15% G.F.

12 O-Ring FKM

13 Stop Plate AISI 304


15 Handle AISI 304


SIZE R.G. Ød L M H h1 h2 E n1x F1 øD1 n2x F2 øD2Weight

in Kg


Pressure 69 bar

Kv Values in m³ /h

¼” (DN 10) ¼” 11,5 65,3 112 73 37 8,5 9 4 x 7 50 4 x 6 36 0,46 4,4 5,7

�" (DN 12) �" 12,5 65,3 112 73 37 8,5 9 4 x 7 50 4 x 6 36 0,46 4,4 6,8

½" (DN 15) ½" 15 65,3 112 73 37 8,5 9 4 x 7 50 4 x 6 36 0,44 4,4 9,7

¾” (DN 20) ¾” 20 77,3 112 81,8 45 8,5 9 4 x 7 50 4 x 6 36 0,81 5,9 18,2

1” (DN 25) 1” 25 88,7 136 90,5 53,5 11,4 9 4 x 7 50 4 x 6 36 0,91 7,8 30,3

1¼” (DN 32) 1¼” 32 102,4 185 98 59 11,4 9 4 x 7 50 4 x 6 36 1,56 13,7 49,4

1½” (DN 40) 1½” 38 109 197,9 115 74,8 14 14 4 x 9 70 4 x 7 50 2,3 17,7 69,3

2” (DN 50) 2” 50 125,3 197,9 124 83,5 13,7 14 4 x 9 70 4 x 7 50 3,2 19,6 128,1

2½” (DN 65) 2½” 65 157,5 264 155 108,8 18 17 4 x 9 70 4 x 11 102 6,4 58,3 268,4

1/4” - 1”

1 1/4”- 1 1/2”

2”

ITEM DESCRIPTION MATERIAL1 Body NICKEL PLATED BRASS 58

2 Body connector NICKEL PLATED BRASS 58



5 Seat ring PTFE

6 Wrench ALUMINIUM

7 Wrench Nut NICKEL PLATED BRASS 58

10 Gland NICKEL PLATED BRASS 58




SIZE R.G. Ø d L J M HWeight

in Kg


Pressure 69 bar

Kv Values in m³ /h

¼” (DN 10) ¼” 10 44 23 95 40,5 0,155 2 5,2

�" (DN 12) �" 10 49 26 95 40,5 0,19 2,7 5,6

½" (DN 15) ½" 14 62 33 95 43 0,3 5,4 15,6

¾” (DN 20) ¾” 19 70 38 115 53 0,48 8 25,1

1” (DN 25) 1” 24 84 45 115 57 0,84 10 44,2

1¼” (DN 32) 1¼” 30 98 55 155 72,5 1,29 14 66,7

1½” (DN 40) 1½” 38 106 60 155 78,5 1,92 20 133,3

2” (DN 50) 2” 47 126 70 175 94 2,98 33 173,2

2½” (DN 65) 2½” 62 152 90 215 112 6,9 47,4 334,2

Brass Ball Valves Full Bore 3 Ways “L” Port


Size ¼” – 2 ½” (DN 10 - 65)

Options 4 Seats

ATEX Certified

Fig. 2000 3 Ways “L” PortD

IMEN

SIO

NS


PART

S A

ND

MAT

ERIA

LS

21

Parts and materials

Dimensions

Pressure Inlet

Port combina� onsPort combina� ons

Fig. 2000 3 Ways “T” Port

ITEM DESCRIPTION MATERIAL1 Body NICKEL PLATED BRASS 58

2 Body connector NICKEL PLATED BRASS 58



5 Seat ring PTFE

6 Wrench ALUMINIUM

7 Wrench Nut NICKEL PLATED BRASS 58

10 Gland NICKEL PLATED BRASS 58




SIZE R.G. Ø d L J M HWeight

in Kg


Pressure 69 bar

Kv Values in m³ /h

¼” (DN 10) ¼” 10 44 23 95 40,5 0,155 2 5,2

�" (DN 12) �" 10 49 26 95 40,5 0,19 2,7 5,6

½" (DN 15) ½" 14 62 33 95 43 0,3 5,4 15,6

¾” (DN 20) ¾” 19 70 38 115 53 0,48 8 25,1

1” (DN 25) 1” 24 84 45 115 57 0,84 10 44,2

1¼” (DN 32) 1¼” 30 98 55 155 72,5 1,29 14 66,7

1½” (DN 40) 1½” 38 106 60 155 78,5 1,92 20 133,3

2” (DN 50) 2” 47 126 70 175 94 2,98 33 173,2

2½” (DN 65) 2½” 62 152 90 215 112 6,9 47,4 334,2

Brass Ball Valves Full Bore 3 Ways “T” Port


Size ¼” – 2 ½” (DN 10 - 65)

Options 4 Seats

ATEX Certified

DIM

ENSI

ON

S


PART

S A

ND

MAT

ERIA

LS

Parts and materials

Dimensions

Pressure Inlet

Port combina� onsPort combina� ons

22

s


2 Disc 1.4408

3 Cap 1.4408

4 Spring AISI 316

5 Screw AISI 316

6 Insert 1.4408

DN ØA ØB C DWeight

in KgASSEM.BETWEEN

FL. ANSI-150Kv Values in m³ /h

15 (½") 53 15 16 45 0,1 NO 8

20 (¾”) 63 20 19 55 0,16 OK 21

25 (1") 73 25 22 65 0,28 OK 32

32 (1¼") 84 32 28 78 0,52 -- 45

40 (1½” ) 94 38 31,5 89 0,7 NO 67

50 (2") 107 50 40 98 1,1 OK 109

65 (2½") 126 62 46 118 1,58 OK 162

80 (3") 144 76,5 50 134 1,76 OK 223

100 (4") 162 96 60 154 3,3 OK 373

125 (5") 190 105 90 --- 10 -- 2692

150 (6") 218 130 106 --- 13 OK 3931

200 (8") 273 170 140 --- 24 OK 6581

VALVE SIZEDirec� on of the � uid

VALVE SIZE

Direc� on of the � uid

� �

DN 15 (½” ) 25 21 23 DN 65 (1½” ) 31 21 25

DN 20 (¾”) 25 21 23 DN 80 (3") 32 21 26

DN 25 (1") 25 21 23 DN 100 (4") 33 21 27

DN 32 (1¼") 27 21 24 DN 125 (5") 35 23 11

DN 40 (1½”) 29 21 25 DN 150 (6") 39 25 12

DN 50 (2") 29 21 25 DN 200 (8”) 41 27 13

Disk Check Valve Wafer Type PN 40

Face to Face Dimensions:

EN 558-1 Series 49

Size DN 15 - 150 (1/2” - 6”) Stainless Steel

Fig. VR 316

PART

S A

ND

MAT

ERIA

LS

23

DN 15 to DN 50

DN 15 to DN 50

DN 65 to DN 100

DN 65 to DN 100

DN 125 & DN 150

DN 125 & DN 200

Ope

niin

g Pr

essu

re in

m b

ar


DIM

ENSI

ON

S

Fig. G150RF / G300RF

24


Carbon Steel Stainless Steel

1 Body A 105 A 182 F316L

2 Disc AISI 420 + STL A 182 F316L

3 Stem AISI 410 A 182 F316L

4 Gasket AISI 304 + Graphite AISI 316 + Graphite

5 Bonnet A 105 A 182 F316L

6 Bolt A 193 B7 A 193 B8M

7 Packing Flexible Graphite + Carbon Fibre

8 Pin AISI 420 AISI 304

9 Packing Gland AISI 420 AISI 316L

10 Eye Bolt A 193 B8 A 193 B8M

11 Gland Flange A 105 A 182 F316L

12 Hex Nut A 194 8 A 194 8M

13 Yoke Nut AISI 410

14 Handwheel A 197

15 Hex Nut 1035 Zinc Plated

16 Nameplate Aluminium

17 Seat A 105 + STL A 182 F316L + STL

SIZE L D T W HWeight


½" (DN 15) 152 95 14,5 100 158 4,8 22,3

¾" (DN 20) 178 118 16 100 163 6,2 42,8

1" (DN 25) 203 124 17,5 125 193 9,3 80,5

1¼" (DN 32) 216 133 19,5 160 250 14 642,7

1½" (DN 40) 229 156 21 160 250 16 1114

2" (DN 50) 267 165 22,5 180 291 24 1970



½" (DN 15) 108 89 11,5 100 158 3,3 22,3

¾" (DN 20) 117 98 13 100 163 4 42,8

1" (DN 25) 127 108 14,5 125 193 6 80,5

1¼" (DN 32) 140 118 16 160 250 7 642,7

1½" (DN 40) 165 127 17,5 160 250 10,5 1114

2" (DN 50) 203 152 19,5 180 291 17 1970

Forged Globe Valves Class 150/300BS 5352, ASME B16.34

Welded Flanges

Connections According To: ANSI B16.5

Size 1/2” – 2” (DN 15 - 50)

Carbon Steel And Stainless Steel

DIM

ENSI

ON

S CL

ASS

300

DIM

ENSI

ON

S CL

ASS

150

PART

S A

ND

MAT

ERIA

LS


25



1 Body A 105 A 182 F316L

2 Disc AISI 420 + STL A 182 F316L



5 Bonnet A 105 A 182 F316L

6 Bolt A 193 B7 A 193 B8M






12 Hex Nut A 194 8 A 194 8M


Handwheel A 197



17 Seat A 105 + STL A 182 F316L + STL

SIZE L NPT Ø W HWeight


½" (DN 15) 79 ½" 100 158 2,2 22,3

¾" (DN 20) 92 ¾" 100 163 2,4 42,8

1" (DN 25) 110 1" 125 193 4,2 80,5

1¼" (DN 32) 152 1¼" 160 250 6 642,7

1½" (DN 40) 152 1½" 160 250 8 1114

2" (DN 50) 172 2" 180 291 12,8 1970

Forged Globe Valves Class 800BS 5352, ASME B16.34

Connections According To: ANSI B1-20.1 (NPT)ANSI B16 .11 (SW)

Size ¼” – 2” (DN 15 - 50)


Fig. G800

DIM

ENSI

ON

S


PART

S A

ND

MAT

ERIA

LS

A 105

A 182 F316L

MATERIAL



1 Body A 105 A 182 F316L

2 Seat A 182 F6A + STL A 182 F316L + STL

3 Gate A 182 F6A + STL A 182 F316L



6 Bonnet A 105 A 182 F316L

7 Bolt A 193 B7 A 193 B8M






13 Hex Nut A 194 8 A 194 8M

14 Washer AISI 410


16 Handwheel A 197



PRESSURE & TEMPERA-TURE RATING

PART

S A

ND

MAT

ERIA

LS

Forged Gate Valves Class 150 / 300API, MSS SP & ASME B16.34

Welded Flanges


Size 1/2” – 2” (DN 15 - 50)


26

Fig. C150 RF / C300 RF



½" (DN 15) 108 89 11,5 100 166 3,3 15

¾" (DN 20) 117 98 13 100 163 4 15

1" (DN 25) 127 108 14,5 125 193 6 29

1¼" (DN 32) 140 118 16 160 230 7 80

1½" (DN 40) 165 127 17,5 160 246 10 80

2" (DN 50) 178 152 19,5 180 263 16 135



½" (DN 15) 140 95 14,5 100 166 4,8 15

¾" (DN 20) 152 118 16 100 163 6,2 15

1" (DN 25) 165 124 17,5 125 193 9,3 29

1¼" (DN 32) 178 133 19,5 160 230 14 80

1½" (DN 40) 190 156 21 160 246 15,5 80

2" (DN 50) 216 165 22,5 180 263 23 135

DIM

ENSI

ON

S CL

ASS

150

DIM

ENSI

ON

S CL

ASS

300

Fig. C800



1 Body A 105 A 182 F316L

2 Seat A 182 F6A + STL A 182 F316L + STL

3 Gate A 182 F6A + STL A 182 F316L



6 Bonnet A 105 A 182 F316L

7 Bolt A 193 B7






13 Hex Nut A 194 8

14 Washer AISI 410


16 Handwheel A 197



SIZE L NPT Ø W HWeight


½" (DN 15) 79 ½" 100 151 2,2 15

¾" (DN 20) 92 ¾" 100 158 2,4 15

1" (DN 25) 110 1" 125 185 4,2 29

1¼" (DN 32) 120 1¼" 160 239 6 80

1½" (DN 40) 120 1½" 160 243 7 80

2" (DN 50) 140 2" 180 279 11 135

Forged Gate Valves Class 800

API 602, MSS SP 118 & ASME B16.34Connections According To:

ANSI B1-20.1 (NPT)ANSI B16 .11 (SW)

Size 1/2” – 2” (DN 15 - 50)


DIM

ENSI

ON

S


PART

S A

ND

MAT

ERIA

LS

A 105

A 182 F316L

MATERIAL

27



1 Body A 105 A 182 F316L

2 Piston disc A 276 420 A 182 F316L

3 Spring 17-4 PH


5 Bonnet A 105 A 182 F316L

6 Bolt A 193 B7 A 193 B8M

7 Ribet A 182 F304 A 182 F316L


9 Seat A 105 + STL A 182 F316L + STL

SIZE L D T HWeight


½" (DN 15) 152 95 14,5 61 4,2 22,3

¾" (DN 20) 178 118 16 61 5,6 42,8

1" (DN 25) 203 124 17,5 78 8,3 80,5

1¼" (DN 32) 216 133 19,5 84 13,1 642,7

1½" (DN 40) 229 156 21 103 14,2 1114

2" (DN 50) 267 165 22,5 118 21,4 1970

SIZE L D T HWeight


½" (DN 15) 108 89 11,5 61 2,7 22,3

¾" (DN 20) 117 98 13 61 3,4 42,8

1" (DN 25) 127 108 14,5 78 5 80,5

1¼" (DN 32) 140 118 16 84 6,1 642,7

1½" (DN 40) 165 127 17,5 103 8,7 1114

2" (DN 50) 203 152 19,5 118 14,4 1970


Forged Check Valves Class 150 / 300BS5352, MSS SP 118 & ASME B16.34

Welded Flanges


Size 1/2” – 2” (DN 15 - 50)


Fig. R150 RF / R300 RF

DIM

ENSI

ON

S CL

ASS

150

DIM

ENSI

ON

S CL

ASS

300

PART

S A

ND

MAT

ERIA

LS

28



FIG. 140 FULL BORE

29

Fig. R800



1 Body A 105 A 182 F316L

2 Piston disc A 276 420 A 182 F316L

3 Spring 17-4 PH


5 Bonnet A 105 A 182 F316L

6 Bolt A 193 B7 A 193 B8M

7 Ribet A 182 F304


9 Seat A 105 + STL A 182 F316L + STL

SIZE L NPT HWeight


½" (DN 15) 79 ½" 51 1,6 22,3

¾" (DN 20) 92 ¾" 55 1,8 42,8

1" (DN 25) 110 1" 68 3,2 80,5

1¼" (DN 32) 152 1¼" 97 5,1 642,7

1½" (DN 40) 152 1½" 97 6,2 1114

2" (DN 50) 172 2" 103 10,2 1970


A 105

A 182 F316L

MATERIAL

Forged Check Valves Class 800API 602

BS5352, MSS SP 118 & ASME B16.34

Connections According To: ANSI B1-20.1 (NPT)ANSI B16 .11 (SW)

Size 1/2” – 2” (DN 15 - 50)


DIM

ENSI

ON

S

PART

S A

ND

MAT

ERIA

LS

DN A C Ø B Kvc15 130 190 140 3,8

20 150 195 140 7

25 160 220 140 10

32 180 219 140 19

40 200 254 180 35

50 230 265 180 43

65 290 328 200 60

80 310 341 200 110

100 350 376 250 146

125 400 488 330 210

150 480 531 330 300

200 600 663 400 670

Bellows Sealed Type Flanged End Globe ValvesPN 16 - PN 25 & PN 40

Size DN 15 - 200

Cast Iron, Nodular Cast Iron & Carbon Steel

30

DIM

ENSI

ON

S


BGV116 BGV216 BGV225 BGV340

1 Body EN-GJL250 EN-GJS400-18 1.0619

2 Bonnet EN-GJL250 EN-GJS400-18 1.0619

3 Spindle x 12 CrNi S 18.8

4 Disc X 20 Cr 13

5 Seat X 22 CrNi 17

7 Handwheel EN-GJS 400

9 Gland Nut EN-10087

10 Gasket Graphite

11 Packing Graphite

15 Bolts 5.6 8,8

16 Handwheel nut EN-10087

18 Hood X 12 CrNi S 18 8

19 Bellow 1.4571

20 Threader Bushing EN-10087

25 An� Turn Device EN-10025

Weightin Kg

BGV116 BGV216 BGV225 BGV340

3,2 3,2 3,7

4,4 4,4 4,8

4,8 4,8 6,8

6,1 6,3 7,8

11 11 13

13 13 15,5

21 21,3 21,3 23

26,4 26,4 27 28

40 40 41 43

53,5 53,5 54,5 68

81 84 85 100

154 157 162 202

PART

S A

ND

MAT

ERIA

LS

Fig. BGV116 / BGV216 / BGV225 & BGV340


Fig. GV116 / GV340

31

Item Descrip� on Material

1 Body EN-GJL250 (Fig.GV116) // 1.0619 (Fig.GV340)

2 Bonnet EN-GJL250 (Fig.GV116) // 1.0619 (Fig.GV340)

3 Spindle X 12 CrNi S 18 8

4 Disc X 20 Cr 13

5 Seat X 22 CrNi 17

6 Gland EN-10025

6.1 Gland Retainer EN-10087

7 Handwheel EN-GJS 400

10 Gasket Graphite

11 Packing Graphite

12 Gland Bolts 5.6

15 Bolts Fig. GV 116: 5,6 // Fig,340: 8,8

16 Handwheel nut EN-10087

20 Threader Bushing EN-10087

25 An� Turn Device EN-10025

SIZE A C ØB Kvs

Weightin Kg

B116 B34015 130 190 140 4 3 3,5

20 150 195 140 7 3,9 4,3

25 160 220 140 11 4,3 6,3

32 180 219 140 19 5,6 7,3

40 200 254 180 30 10,5 12,5

50 230 265 180 46 12,5 15

65 290 328 200 70 20,5 22,5

80 310 341 200 115 26 27,5

100 350 376 250 150 39 42

125 400 488 330 220 52,5 67

150 480 531 330 310 80 99

200 600 663 400 675 152

Flanged end globe valves pn 16 - pn 40Valve Design: DIN 3840

Size DN 15 - DN 200 PN16 & PN40

Cast Iron & Carbon Steel

DIM

ENSI

ON

S


PART

S A

ND

MAT

ERIA

LS

ITEM DESCRIPTION MATERIAL1 Body EN-GJL250 (Fig.C116) // 1.0619 (Fig.C340)

2 Cap EN-GJL250 (Fig.C116) // 1.0619 (Fig.C340)

3 Disc X 20 Cr 13

4 Seat X 22 CrNi 17

5 Spring X 12 Cr Ni 17.7

6 Bolts Fig.C116: 5,6 // 1Fig.C340: 8,8

8 Gland Retainer Graphite

DN A C Kvs

15 130 65 3,5

20 150 70 6,5

25 160 80 10,5

32 180 85 17

40 200 120 26

50 230 130 42

65 290 160 69

80 310 165 109

100 350 185 171

125 400 210 260

150 480 250 374

200 600 275 662

Flanged End Check Valves

PN 16 & PN40

Size DN 15 - 200

Cast Iron & Carbon Steel

FIG. 140 FULL BORE

PART

S A

ND

MAT

ERIA

LS

Weight in Kg

C116 C340

2,9 3,9

3,9 4,9

3,9 6,4

5,9 7,6

10,9 12,9

12,9 15,4

21,4 23,4

26,9 28,4

39,9 42,9

54,1 68,1

80,9 99,9

149,8 200,9

Fig . CHV116 & CHV340


32

DN A C DS116 S315 S340 S415 S416

Ø B WEIGHT Ø B WEIGHT Ø B WEIGHT Ø B WEIGHT Ø B WEIGHT15 130 74 105 95 2,0 89 1,8 95 2,5 89 1,8 95 2,0

20 150 86 122 105 2,8 98,5 2,6 105 3,4 98,5 2,6 105 2,8

25 160 93 136 115 3,5 108 3,2 115 4,2 108 3,2 115 3,5

32 180 115 161 140 5,6 117 5,3 140 8,0 117 5,3 140 5,6

40 200 128 177 150 7,0 127 6,5 150 9,5 127 6,5 150 7,0

50 230 147 210 165 9,7 152 9,0 165 12,5 152 9,0 165 9,7

65 290 181 252 185 14,5 178 14,0 185 17,0 178 14,0 185 14,5

80 310 196,5 268 200 19,2 190,5 18,5 200 23,0 190,5 18,5 200 19,2

100 350 219 303 220 27,0 229 26,0 235 33,5 229 26,0 220 27,0

125 400 261 371 250 46,0 254 45,0 270 62,0 254 45,0 250 46,0

150 480 348 512 285 74,5 279 73,5 300 85,0 279 73,5 285 74,5

200 600 416 625 340 125,0 343 122,0 375 151,0 343 122,0 340 125,0

FIG MATERIAL PN / CLASSS116 Cast Iron PN 16

S315 Carbon Steel Class 150

S340 Carbon Steel PN 40

S415 Stainless Steel Class 150

S416 Stainless Steel PN 16

Flanged “Y” Type Strainer

PN 16 - PN 40

Size DN 15 - 200

Cast Iron, Carbon Steel and Stainless Steel

Available in Class 150 / 300 / 600

33

DIM

ENSI

ON

S


Cast Iron Carbon Steel Stainless Steel

1 Body EN-GJL-250 1.0619 1.4408

2 Cap EN-GJL-250 1.0619 1.4408

3 Strainer Screen AISI-304 AISI-316

4 Body Bolt 8.8 8.8 A2

5 Cap Gasket Synthe� c Fiber PTFE

6 Drain Plug * 1.0401 1.4401

7 Drain Plug Gasket Synthe� c Fiber

PART

S A

ND

MAT

ERIA

LS

Fig. S116/S315/S340/S415/S416


* DRAIN PLUG M 14

ITEM DESCRIPTION CARBON STEEL STAINLESS STEEL1 Body 1.0570 (ST 52.3) 1.4401 (AISI 316)

2 Cap 1.0421 (ST.52) 1.4401 (AISI 316)

3 Strainer screen 1.4301 (AISI 304)

4 Bolt 8.8 A2

5 Nut 8 A2

6 Cap Gasket Syntethic Fiber PTFE

7 Drain plug 1.0401 (C15) 1.4401 (AISI 316)

8 Drain plug gasket Synthe� c � ber PTFE

DIM

ENSI

ON

S

Flanged Y-Type Fabricated Strainers

PN 10, PN 16 & PN 20 ( Class 150) DN 250 – 600 ( 10”- 24” )

Carbon Steel & Stainless Steel

Fig. FS310/316/315/ FS410/416/415

34

PART

S A

ND

MAT

ERIA

LS

SIZE A

ØB

C D

WEIGHT IN Kg

PN 10 PN 16PN 20

(Class 150)PN 10 PN 16

PN 20(Class 150)

250 (10") 730 395 405 406.4 530 920 130 190 192

300 (12") 850 445 460 482.5 630 1020 190 240 243

350 (14") 980 505 520 533.4 770 1200 250 340 342

400 (16") 1100 565 580 596.9 830 1350 330 400 403

450 (18") 1200 615 640 635 920 1500 450 490 492

500 (20") 1250 670 715 698.5 1000 1650 520 550 553

600 (24") 1450 780 840 812.8 1250 1800 670 700 702


ITEM DESCRIPTION CARBON STEEL CAST IRON STAINLESS STEEL1 BODY 1.0619 GG-25 1.4408

2 COVER 1.0619 GG-25 1.4408

3 SCREEN AISI-316 AISI-304 AISI-316

4 GASKET FIBER FIBER PTFE

“Y” TYPE STRAINERS

“Y” Type Strainers Screw ends

connection acc BSP

Screen Perforations 1 mm DN-50

Quality Certificates Acc. EN 10204 2.2

PARTS AND MATERIALS

DIMENSIONS

SIZE A 15 ( 1/2") 85

20 (3/4") 100

25 (1") 120

32 (1 1/4") 135

40 (1 1/2”) 160

50 (2”) 190

35

2 4 3 1

A

Temporary Basket Strainers Temporary Conical Strainers

FLANGED DIMENSIONS: EN 1092 & ASME B16.5

Standard Perforated Plate Ø 3 mm

Carbon Stainless & Stainless Steel

TEMPORARY STRAINERS

TEMPORARY BASKET STRAINERS

CARBON STEELTTCS315 TTCS330 TTCS360

TEMPORARY CONICAL STRAINERS

CARBON STEELTCS315 TCS330 TCS360

TEMPORARY BASKET STRAINERS

CARBON STEELTTCS310 TTCS316 TTCS325 TTCS340 TTCS363

TEMPORARY CONICAL STRAINERS

CARBON STEELTCS310 TCS316 TCS325 TCS340 TCS636

STAINLESS STEELTBCS415 TBCS430 TBCS460

STAINLESS STEELTCS415 TCS430 TCS460

STAINLESS STEELTBCS410 TBCS416 TBCS425 TBCS440 TBCS463

STAINLESS STEELTCS410 TCS416 TCS425 TCS440 TCS463

ANSI 150 / ANSI 300 / ANSI 600

ANSI 150 / ANSI 300 / ANSI 600

PN 10 / PN 16 / PN 25 / PN 40 / PN 63

PN 10 / PN 16 / PN 25 / PN 40 / PN 63

36

ITEM DESCRIPTION MATERIAL1 Body A106 Gr. B / A516 Gr.70

2 Heads A234 WPB / A516 Gr. 70

3 Inlet / Outlet � anges A105 / S235JR

4 Sockets ASTM A105

5 Internals A106 Gr. B / A516 Gr. 70

6 Insert 1.4408

PN 16 FLANGES SCREWED ENDS

SIZE A B C D E FV O L

dm³WEIGHT

in KgG

WEIGHT in Kg

15 (½") 230 114 260 176 84 ½" 2 7,5 160 6,20

20 (¾") 230 114 260 171 89 ½" 2,5 8 154 6,10

25 (1") 230 114 300 211 89 ½" 3 8,5 154 6,22

32 (1 ¼") 260 140 395 279 116 ½" 5 12 180 8,62

40 (½") 260 140 435 335 100 ½" 5,7 13,8 176 10,08

50 (2") 310 168 505 366 139 ½" 10,5 19,5 220 14,44

65 (2 ½") 380 219 550 388 162 ¾" 18,5 32 290 25,88

80 (3") 400 219 620 456 164 ¾" 25 37,7 300 30,30

100 (4") 485 273 715 504 211 ¾" 35,4 57 381 47,76

125 (5") 555 324 845 595 250 1" 50 81,5 445 68,90

150 (6") 585 356 1072 626 446 1" 75 157 475 141,50

200 (8") 700 457 1210 879 331 1" 95 242 576 220,00

SIZE DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200

RATING PN16 PN16 PN16 PN16 PN16 PN16 PN16 PN16 PN16 PN16 PN16 PN16

CATEGORY SEP SEP SEP SEP SEP SEP SEP SEP SEP 1 1 1

RATING PN40 PN40 PN40 PN40 PN40 PN40 PN40 PN40 PN40 PN40 PN40 PN25

CATEGORY SEP SEP SEP SEP SEP 1 1 1 1 1 1 1

Centrifugal Separators

Size DN 15 - DN 200 (1/2” - 8”) PN 16

Carbon Steel

Fig. SP 316

PART

S A

ND

MAT

ERIA

LS

Aplica� ons Limits / CE Marking

DIM

ENSI

ON

S

37

DN A B C Drain Vent Rel. Areas

50 300 340 490 1" ----- 1:5.49

65 350 370 550 1" ----- 1:4.33

80 375 409 625 1" ----- 1:3.73

100 440 457 685 1" ----- 1:3.31

125 525 580 730 1 1/2" ½" 1:2.61

150 600 670 910 1 1/2" ½" 1:2.83

200 800 810 1080 1 1/2" ½" 1:2.75

250 900 870 1250 2" 3/4" 1:2.67

300 950 930 1360 2" 3/4" 1:2.63

350 1050 1150 1600 2" 1" 1:2.60

400 1150 1180 1680 2" 1" 1:2.28

DIM

ENSI

ON

S

Quick Opening Basket Strainers Basket Strainers Bolted Cover

Fig. BSQ310/BSQ316/BSQ315/BSQ410/BSQ416/BSQ415 FIG. BS310/BS316/BS315/BS410/BS416/BS41

DN 50 - DN 200 PN 10 / PN 16 & Class 150

Carbon Steel & Stainless Steel

Fig. BSQ / BS

DN A B C Drain Vent Rel. Areas

50 3 00 340 545 1" ----- 1:5.49

65 350 370 600 1" ----- 1:4.33

80 375 409 671 1" ----- 1:3.73

100 440 457 715 1" ----- 1:3.31

125 525 580 785 1 1/2" ½" 1:2.61

150 600 670 915 1 1/2" ½" 1:2.83

200 800 810 1065 1 1/2" ½" 1:2.75

250 900 870 1225 2" 3/4" 1:2.67

300 950 930 1335 2" 3/4" 1:2.63

350 1050 1150 1575 2" 1" 1:2.60

400 1150 1180 1650 2" 1" 1:2.28

DIM

ENSI

ON

S

38

ACCESSORIES

PNEUMATIC ACTUATORDouble Acting (ADA)Spring Return (ASR)

MULTIVOLTAGE ELECTRIC ACTUATORS

LIMITS SWITCHES BOX

DECLUTCHABLE GEAR BOX

SOLENOIDE VALVE

Other Accessories On Request

39

C/Cantabria, 2Polígono Industrial Les Salines08830 Sant Boi de Llobregat

Barcelona (Spain)

Phone: + 34 93 654 86 54 Fax: + 34 93 654 86 55

e-mail: [email protected]

Authorized Dealer:

All modi� ca� ons rights are reserved

05/2011

Catalogo ICP 11 2011 - Group Tech Valves... · 2012. 10. 3. · ATEX Certified . ITEM DESCRIPTION...

Documents

Transcript of Catalogo ICP 11 2011 - Group Tech Valves... · 2012. 10. 3. · ATEX Certified . ITEM DESCRIPTION...