7/27/2019 Castle Geometri

1/6

Step 1: Print out the pieces of the Castle pop-up on a heavy paper, like cardstock or construction paper.

7/27/2019 Castle Geometri

2/6

Step 2: Print out the card for the Castle on the same heavy paper.

7/27/2019 Castle Geometri

3/6

Castle

Step 3:Using a ruler as a guide, take the

rounded end of a paper clip (orballpoint pen that has run out of

ink) and press along the dotted linesof the pop-up pieces and card.

Step 4:Carefully cut out the pop-up pieces

and Castle card following the solid,black lines.

Step 5:Using the tip of your scissor, poke

through the drawbridge area and cutit out from the main Castle pop-up

piece.

Step 6:Take your Castle card, fold it in

half and then open it. Set it aside.

Step 7:Take the main Castle pop-up piece

and fold the top left tab back awayfrom you. Crease with your thumb

or finger.

Step 8:Now place it back to its original

position.

Step 9:Repeat the step with the same tab

Step 10:Release it back to its original

Step 11:Now take your card and apply a

7/27/2019 Castle Geometri

4/6

this time on the second dotted line,folding it back away from you.

position. Apply the same steps withthe top right tab on the other side.

small amount of glue to the top twogrey squares marked "glue here" on

the left and right sides only.

Step 21:

Place it back to its original position.

Step 22:

Now take the next tab and fold itup, crease with your finger.

Step 23:

Place it back to its original position.

Step 24:Take the tab with the drawbridge;

follow the same steps folding up at

the base of the tab upwards. Creasewith your finger.

Step 25:Now fold the preceding dotted line

up and crease with your finger.

Step 26:Place it back to its original position.

Step 27a:Now fold the last preceding dotted

Step 27b:Place it back to its original position.

Step 28:Place a small amount of glue on the

7/27/2019 Castle Geometri

5/6

line up and crease with your finger Now repeat the same steps on thelast three tabs on the other side.

grey areas marked "glue here." Andalign the bottom tabs of your main

pop-up piece with the matching

grey areas. Press firmly and be surelet the glue dry.

Castle

Step 29:

Place fingers under the Castle piece and raise the piece forward. Step 30a:

Then fold the Castle card in half and press firmly. Open the card and lay it flat. Step 30b:

Take the middle-sized piece and glue it to the center of the main Castle. Press firmly and let dry.

Step 31a:

7/27/2019 Castle Geometri

6/6

Take your remaining Castle pieces. Apply a small amount of glue to the side tabs of the main

Castle piece. Step 31b:

Place the small Castle tower pieces on top, press firmly and let the glue dry. Step 32:

Place fingers under the Castle piece and raise the piece forward. Then fold the card in half and

press firmly. Open the card.

Your Castle pop-up is now finished! Long live the King and Queen!