Titles of Solid and Structural Mechanics Books

A

A Course on Damage Mechanics, Lemaitre, J., 1998

A Primer in Elasticity, Podio-Guidugli, P., 2000

Advanced Composite Materials, Pilato, L. A. and Michno, M. J., 1994

Advanced Engineering Dynamics, Harrison, H. R. and Nettleton, T., 1997

Advanced Mechanics of Materials, Bickford, W., 1998

Advanced Mechanics of Materials, Boresi, A. P. P. et al., 1992

Advanced Mechanics of Materials, Cook, R. and Young, W., 1999

Advanced Mechanics of Structures, Fertis, D. G., 1996

Advanced Strength and Applied Elasticity, Ugural, A. C. and Fenster, S. K., 1995

Advanced Strength and Applied Stress Analysis, Budynas, R., 1998

Advanced Structural Mechanics, Johnson, D., 2000

Advanced Technology for Design and Fabrication of Composite Materials and Structures, Sih, G. C. et al., eds., 1995

Advances in Damage Mechanics: Metals and Metal Matrix Composites, Voyiadjis, G. Z. and Kattan, P. I., 1999

Aircraft Structures for Engineering Students, Megson, T. H. G., 1999

An Introduction to Composite Materials, Hull, D. and Clyne, T. W., 1996

An Introduction to Fatigue in Metals and Composite, Carlson, R. W., 1995

An Introduction to Metal Matrix Composites, Clyne, T. W. and Withers, P. J., 1995

An Introduction to Modern Anisotropic Elasticity, Chernykh, K. F. and Kulman, N. K., 1998

Analysis and Behavior of Structures, Rossow, E. C., 1995

Analysis and Design of Elastic Beams: Computational Methods, Pilkey, W. D., 2002

Analysis and Optimum Design of Metal Structures, Farkas, J. and Jarmai, K., 1997

Analysis of Beams on Elastic Foundations, Jones, G., 1997

Analysis of Composite Structures, Decolon, C., 2001

Analysis of Crack in Solids, Khludnev, A. M. and Kovtunenko, V. A., 1999

Analysis of Structural Systems, Fleming, J. F., 1996

Analytical Fracture Mechanics, Unger, D. J., 2001

Anisotropic Elasticity, Ting, T. T. C., 1996

Applied Methods of Structural Reliability, Tichy, M., 1993

Applied Plasticity, Chakrabarty, J., 2000

Applied Strength of Materials, Mott, R. L., 1995

Applied Structural and Mechanical Vibrations: Theory, Methods, and Measuring Instrumentation, Gatti, P. L. and Ferrari, V., 1999

Applied Structural Mechanics, Fundamentals of Elasticity, Load Bearing Structures, Structural Optimization, Eschenauer, H. et al., 1997

Approximate Solution Methods in Engineering Mechanics, Boresi, A. P. and Hjelm, J. P., 2002

Asymptotic Methods in the Buckling Theory of Elastic Shells, Tovstik, P. E. and Smirnov, A. L., 2001

B

Behavior of Sandwich Structures of Isotropic and Composite Materials, Vinson, J., 1999

Biharmonic Problem of the Theory of Elasticity, Lurie, S. A. and Vasiliev, V. V., 1995

Blast and Ballistic Loading of Structures, Smith, P. D. et al., 1994

Brittle Failure of Rock Materials: Test Results & Constitutive Models, Andreev, G. E., 1995

Buckling and Postbuckling of Composite Plates, Turvey, G. J. and Marshall, I. H., eds., 1994

Buckling Experiments: Experimental Methods in Buckling of Thin-Walled Structures, Vol 1, Basic Concepts, Columns, Beams and Plates, Singer, J. and Arbocz, J., 1997

C

Cardiovascular Solid Mechanics, Humphrey, J. D. D., 2002

Classical and Computational Solid Mechanics, Fung, Y. C. and Tong, P., 2001

Complex Variable Methods in Plane Elasticity, Lu, J. K., 1995

Composite Materials: Engineering and Science, Matthews, F. L. and Rawlings, R. D., 1999

Composite Materials, Mechanical Behavior and Structural Analysis, Berthelot, J. M., 1999

Composite Materials: Processing, Fabrication and Applications, Vol 2, Schwartz, M. M., 1997

Composite Materials: Properties, Non-Destructive Testing and Repair, Vol 1, Schwartz, M. M., 1996

Composite Materials, Science and Engineering, Chawla, K. K., 1998

Composite Sheet Forming, Bhattacharyya, D., ed., 1997

Composite Steel and Concrete Structural Members, Oehlers, D. J. and Bradford, M. A., 1995

Composite Structures for Civil and Architectural Engineering, Kim, D. H., 1994

Compositional and Failure Analysis of Polymers: A Practical Approach, Scheirs, J., 2000

Computational and Experimental Fracture Mechanics, Nisitani, H., ed., 1994

Computational Contact Mechanics, Wriggers, P., 2002

Computational Dynamics, Shabana, A. A., 2001

Computational Fracture Mechanics in Concrete Technology, Carpinteri, A. and Aliabadi, M. H., eds., 1999

Computational Inelasticity, Simo, J. C. and Hughes, T. J. R., 1999

Computational Methods in Solid Mechanics, Curnier, A., 1994

Computer Analysis and Design of Earthquake Resistant Structures, Beskos, D. E. and Anagnostopoulos, S. A., eds., 1997

Computer Applications in Mechanics of Materials Using MATLAB, Turcotte, L. H. and Wilson, H. B., 1998

Concrete Beams With Openings: Analysis and Design, Mansur, M. A. and Tan, K. H., 1999

Concrete Construction Engineering Handbook, Nawy, E. G., ed., 1997

Concrete Folded Plate Roofs, Wilby, C. B., 1997

Concrete Structures: Stresses and Deformations, Ghali, A. and Favre, R., 1998

Concrete Structures in Earthquake Regions: Design and Analysis, Booth, E. D., ed., 1994

Constitutive Equations for Engineering Materials, Vol 1: Elasticity and Modeling, Chen, W. F. and Saleeb, A. F., 1994

Constitutive Equations for Engineering Materials, Vol 2: Plasticity and Modeling, Chen, W. F. et al., 1994

Contact, Adhesion and Rupture of Elastic Solids, Maugis, D., 2000

Contact Mechanics in Tribology, Goryacheva, I. G., 1998

Continuum Theory of Plasticity, Khan, A. S. and Huang, S., 1995

Cosserat Theories: Shells, Rods and Points, Rubin, M. B., 2000

Crack and Contact Problems for Viscoelastic Bodies, Graham, G. A. C. and Walton, J. R., eds., 1995

Cracks and Fracture, Broberg, K. B., 1999

Crashworthiness of Composite Thin-Walled Structural Components, Mamalis, A. G. et al., 1998

Creep and Damage in Materials and Structures, Altenbach, H. and Skrzypek, J. J., eds., 1999

Creep and Relaxation of Nonlinear Viscoelastic Materials, Findley, W. N. et al., 1990

Cyclic Fatigue in Ceramics, Kishimoto, H. et al., eds., 1995

Cyclic Plasticity and Low Cycle Fatigue Life of Metals, Polak, J., 1991

D

Damage Mechanics, Krajcinovic, D., 1996

Damage Mechanics of Composite Materials, Talreja, R. et al., 1994

Deformation and Fracture Mechanics of Engineering Materials, Hertzberg, R. W., 1995

Design Analysis of Beams, Circular Plates and Cylindrical Tanks on Elastic Foundations, Melerski, E. S., 2000

Design and Analysis of Shell Structures, Farshad, M., 1992

Design and Analysis With Advanced Composite Materials, Swanson, S. R., 1996

Design and Optimization of Laminated Composite Materials, Gurdal, Z. et al., 1999

Design for Lateral Forces, Ambrose, J. E. and Vergun, D., 1990

Design of Concrete Structures With Stress Fields, Muttoni, A. et al., 1997

Designer's Guide to the Dynamic Response of Structures, Jeary, A. P., 1998

Digital Photoelasticity, Ramesh, K., 2000

Dislocation Based Fracture Mechanics, Weertman, J., 1996

Dynamic Analysis and Failure Modes of Simple Structures, Schiff, D. B., 1990

Dynamic Behavior of Concrete Structures, Mo, Y. L., 1994

Dynamic Behavior of Materials, Meyers, M. A., 1994

Dynamic Fracture Mechanics, Freund, L. B., 1998

Dynamic Fracture Mechanics, Aliabadi, M. H., ed., 1995

Dynamic Fracture Mechanics: Displacement Discontinuity Method, Wen, P. H., 1996

Dynamic Models for Structural Plasticity, Stronge, W. J. and Yu, T., 1995

Dynamic Structural Design: Using the Inverse Method, Takewaki, I., 1999

Dynamics and Control of Distributed Systems, Tzou, H. S. and Bergman, L. A., eds., 1998

Dynamics and Control of Structures, Meirovitch, L., 1990

Dynamics for Engineers, Muvdi, B. B. et al., 1997

Dynamics of Civil Engineering Structures, Kratzig, W. B. and Niemann, H. J., eds., 1996

Dynamics of Fracture, Morozov, N. and Petrov, Y., 2000

Dynamics of Heterogeneous Materials, Nesterenko, V., 2001

Dynamics of Pavement Structures, Martincek, G., 1994

Dynamics of Plates, Rao, J. S., ed., 1998

Dynamics of Structures, Argyris, J. H. and Mlejnek, H. P., 1991

Dynamics of Structures: Theory and Applications to Earthquake Engineering, Chopra, A. K., 2000

Dynamics of Thin Walled Elastic Bodies, Kaplunov, J. D. et al., 1997

E

Elastic and Inelastic Stress Analysis , Shames, I. H. and Cozzarelli, F. A., 1997

Elasticity , Barber, J. R., 1992

Elasticity: Theory and Applications , Reismann, H. and Pawlik, P. S., 1991

Elasticity: Theory and Applications , Saada, A. S., 1993

Elasticity in Engineering Mechanics , Boresi, A. P. and Chong, K. P., 1999

Elastoplasticity Theory , Lubarda, V. A., 2001

Elementary Behaviour of Composite Steel and Concrete Structural Members , Oehlers, D. J. and Bradford, M. A., 1999

Elementary Mechanics of Plastic Flow in Metal Forming , Talbert, S. H. and Avitzur, B., 1996

Elements of Plasticity, Theory and Computation , Doltsinis, I., 2000

Elements of the Theory of Structures , Heyman, J., 1996

Energy Methods in Structural Mechanics , Guarracino, F. and Walker, A., 1999

Engineered Interfaces in Fiber Reinforced Composites , Kim, J. K. and Mai, Y. W., 1998

Engineering Analysis in Applied Mechanics , Brewer, J. W., 2002

Engineering Mechanics: Dynamics , Soutas-Little, R. and Inman, D., 1999

Engineering Mechanics: Statics , Soutas-Little, R. and Inman, D., 1999

Engineering Mechanics of Composite Materials , Daniel, I. M. and Ishai, O., 1995

Engineering Mechanics of Solids , Popov, E. P., 1999

Engineering Solid Mechanics: Fundamentals and Applications , Ragab, A. R. and Bayoumi, S. E. A., 1998

Engineering Vibrations , Inman, D. J., 2001

Experimental Solid Mechanics , Wilson, J., 1993

Explosive Loading of Engineering Structures , Bulson, P. S., 1997

F

Failure Analysis Case Studies II , Jones, D. R. H., ed., 2001

Failure of Materials in Mechanical Design , Collins, J. A., 1993

Fatigue Design: Life Expectancy of Machine Parts , Zahavi, E. J. et al., 1996

Fatigue of Materials , Suresh, S., 1998

Finite Elasticity and Viscoelasticity: A Course in the Nonlinear Mechanics of Solids , Drozdov, A. D., 1996

Flexural-Torsional Buckling of Structures , Trahair, N. S., 1994

Formulas for Dynamic Analysis , Huston, R. L. and Liu, C. Q., 2001

Formulas for Natural Frequency and Mode Shape , Blevins, R. D., 1995

Formulas for Stress, Strain, and Structural Matrices , Pilkey, W. D., 1994

Formulas for Structural Dynamics , Karnovsky, I. A., 2001

Fracture and Size Effect in Concrete and Other Quasibrittle Materials , Bazant, Z. P. and Planas, J., 1997

Fracture Mechanics , Miannay, D. P., 1998

Fracture Mechanics: An Introduction , Gdoutos, E. E. E., 1993

Fracture Mechanics: Fundamentals and Applications , Anderson, T., 1994

Fracture Mechanics and Structural Concrete , Karihaloo, B. L., 1995

Fracture Mechanics in Engineering Structures and Rock Mass , Orekhov, B. G. and Zertsalov, M. G., eds., 2001

Fracture Mechanics of Cementitious Materials , Mai, Y. W. and Cotterell, B., 1995

Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock and Other Quasi-Brittle Materials , Shah, S. P. et al., 1995

Fracture Mechanics of Metals, Composites, Welds, and Bolted Joints , Farahmand, B., 2000

Fracture Mechanics Testing Methods for Polymers Adhesives and Composites , Moore, D. R. et al., eds., 2001

Fracture of Brittle Solids , Lawn, B., 1993

Fracture Processes of Concrete: Assessment of Material Parameters for Fracture Models , Van Mier, J. G., 1996

Fracture Research in Retrospect , Rossmanith, H. P., ed., 1997

Fundamental Principles of Fiber Reinforced Composites , Ashbee, K. H. G., 1993

Fundamentals of Aircraft Structural Analysis , Curtis, H., 1997

Fundamentals of Engineering Elasticity , Borg, S. F., 1990

Fundamentals of Metal Forming , Wagoner, R. H. and Chenot, J. L., 1995

Fundamentals of Structural Analysis , Au, T. and Christiano, P. P., 1992

Fundamentals of Structural Analysis , French, S. E., 1998

Fundamentals of Structural Analysis , Leet, K. M. and Uang, C. M., 2001

Fundamentals of Structural Analysis , West, H. H., 1993

Fundamentals of Structural Analysis , West, H. H. and Geschwindner, L. F., 2001

Fundamentals of Structural Mechanics , Hjelmstad, K. D., 1996

Fundamentals of the Three-Dimensional Theory of Stability of Deformable Bodies , Guz, A. N., 1999

Fundamentals of Ultrasonic Nondestructive Evaluation: A Modeling Approach , Schmerr, L. W., 1998

G

Guide to Stability Design Criteria for Metal Structures , Galambos, T. V., ed., 1998

H

Handbook of Computational Solid Mechanics , Kleiber, M., ed., 1998

Handbook of Structural Engineering , Chen, W. F., ed., 1997

Handbook of Thin Plate Buckling and Postbuckling , Bloom, F. and Douglas, D. W., 2000

High Performance Computing in Structural Engineering , Adeli, H. and Soegiarso, R., 1998

High Performance Concretes and Applications , Shah, S. P. and Ahmad, S. H., 1994

High Sensitivity Moire: Experimental Analysis for Mechanics and Materials , Post, D. et al., 1997

High Velocity Impact Dynamics , Zukas, J. A., ed., 1990

Holographic Interferometry in Experimental Mechanics , Ostrovsky, Y. I. et al., 1991

I

Impact and Explosion: Analysis and Design , Bangash, M. Y. H., 1993

Impact Mechanics , Stronge, W. J., 2000

Impact on Composite Structures , Abrate, S., 1998

Inelastic Analysis of Structures , Jirasek, M. and Bazant, Z. P., 2001

Inelastic Behaviour of Structures Under Variable Loads , Mroz, Z. et al., eds., 1995

Inelastic Deformation of Metals , Stouffer, D. C. and Dame, L. T., 1996

Inelasticity and Micromechanics of Metal Matrix Composites , Voyiadjis, G. Z. and Ju, J. W., eds., 1994

Intermediate Mechanics of Materials , Barber, J. R., 2000

Introduction to Composite Materials Design , Barbero, E. J., 1998

Introduction to Contact Mechanics , Fischer-Cripps, A. C., 2000

Introduction to Dynamic Systems Modeling for Design , Smith, D. L., 1994

Introduction to Linear Elasticity , Gould, P. L., 1994, 1999

Introduction to Linear Shell Theory , Ciarlet, P. G., 1998

Introduction to Shell Structures , Melaragno, M., 1991

Introduction to Solid Mechanics , Shames, I. H. and Pitarresi, J. M., 2000

Introduction to Structural Analysis & Design , Rajan, S. D., 2001

Inverse and Crack Identification Problems in Engineering Mechanics , Stavroulakis, G. E., 2000

Inverse Problems in the Mechanics of Materials: An Introduction , Bui, H. D., 1994

L

Laminar Composites , Staab, G., 1999

Limit Analysis and Concrete Plasticity , Nielsen, M. P., 1998

Linear Elastic Fracture Mechanics for Engineers , Pook, L. P., 2000

Linearized Theory of Elasticity , Slaughter, W. S., 2001

M

Mastering Mechanics I, Using MATLAB: A Guide to Statics and Strength of Materials, Hull, D. W., 1999

Materials With Memory, Alber, H. D., 1998

Mathematical Analysis of Thin Plate Models, Destuynder, P. et al., eds., 1996

Mathematical Elasticity, Volume I: Three-Dimensional Elasticity, Ciarlet, P. G., 1988

Mathematical Elasticity, Volume II: Theory of Plates, Ciarlet, P. G., 1997

Mathematical Elasticity, Volume III: Theory of Shells, Ciarlet, P. G., 2000

Mathematical Modelling of Solids With Nonregular Boundaries, Movchan, A. B. and Movchan, N. V., 1995

Mathematical Models for Elastic Structures, Villaggio, P., 1998

Mathematical Models for Structural Reliability Analysis, Casciati, F. and Roberts, J. B., 1996

Mathematical Problems in Elasticity, Russo, R., ed., 1996

Mathematical Problems in Linear Viscoelasticity, Fabrizio, M. and Morro, A., 1992

Mathematical Problems in Elasticity and Homogenization, Oleinik, O. A. et al., 1992

Mathematical Programming Methods in Structural Plasticity, Smith, D. L., ed., 1990

Mathematical Theory of Elastic Structures, Feng, K. and Shi, Z. C., 1996

Matrix Analysis of Structural Dynamics: Applications and Earthquake Engineering, Cheng, F. Y., 2000

Matrix Analysis of Structures, Kassimali, A., 1999

Matrix Analysis of Structures, Sennett, R. E., 2000

Matrix Structural Analysis, Felton, L. P. and Nelson, R. B., 1997

Matrix Structural Analysis, Sack, R. L., 2000

Matrix Structural Analysis, With MASTAN2 McGuire, W. et al., 1999

Mechanical and Structural Vibration: Theory and Application, Ginsberg, J. H., 2001

Mechanical and Structural Vibrations, Fertis, D. G., 1995

Mechanical Behavior of Engineering Materials, 2 Volumes, Haddad, Y. M., 2000

Mechanical Behavior of Materials , Meyers, M. A. and Chawla, K. K., 1999

Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue , Dowling, N. E., 1999

Mechanical Behavior of Materials, Vol I: Elasticity and Plasticity , Francois, D. et al., 1998

Mechanical Behavior of Materials, Vol II: Viscoplasticity, Damage, Fracture and Contact Mechanics , Francois, D. et al., 1998

Mechanical Fastening, Joining, and Assembly , Speck, J. A., 1997

Mechanical Response of Polymers , Wineman, A. S. and Rajagopal, K. R., 2000

Mechanical Vibration: Analysis, Uncertainties, and Control , Benaroya, H., 1998

Mechanical Vibrations , Rao, S. S., 1995

Mechanical Vibrations: Theory and Applications to Structural Dynamics , Geradin, M. and Rixen, D., 1997

Mechanics and Analysis of Composite Materials , Vasiliev, V. V. and Morozov, E., 2001

Mechanics and Materials: Fundamentals and Linkages , Meyers, M. A. et al., eds., 1999

Mechanics in Material Space With Applications in Defect and Fracture Mechanics , Kienzler, R. and Herrmann, G., 2000

Mechanics of Aircraft Structures , Sun, C. T., 1998

Mechanics of Composite Materials , Aboudi, J., 1991

Mechanics of Composite Materials , Jones, R. M., 1998

Mechanics of Composite Materials , Reddy, J. N., ed., 1994

Mechanics of Composite Materials: With Disk , Kaw, A. K. and Kaw, A. K., 1997

Mechanics of Composite Structural Elements , Altenbach, H. et al., 2004

Mechanics of Composite Structures , Vasiliev, V. V., 1993

Mechanics of Curved Composites , Akbarov, S. D. and Guz, A. N., 2000

Mechanics of Deformable Solids; Linear, Nonlinear, Analytical and Computational Aspects , Doghri, I., 2000

Mechanics of Engineering Materials , Benham, P. P. et al., 1996

Mechanics of Fatigue , Bolotin, V. V., 1998

Mechanics of Fibrous Composites , Herakovich, C. T., 1997

Mechanics of Fracture Initiation and Propagation , Sih, G. C., 1991

Mechanics of Fretting Fatigue , Hills, D. A. and Nowell, D., 1994

Mechanics of Laminated Composite Plates Theory and Analysis , Reddy, J. N., 1996

Mechanics of Materials , Bedford, A. and Liechti, K. M., 2001

Mechanics of Materials , Beer, F. P. and Johnston E. R., 1992

Mechanics of Materials , Craig, R. R., 1996, 1999

Mechanics of Materials , Gere, J. M., 1984, 1987, 1991, 2000

Mechanics of Materials, Vol 1 and 2 , Hearn, E. J., 1997

Mechanics of Materials , Hibbeler, R. C., 2000

Mechanics of Materials , Riley, W. F. F. et al., 1998

Mechanics of Materials , Roylance, D., 1995

Mechanics of Materials , Vable, M., 2002

Mechanics of Materials and Interfaces: The Disturbed State Concept , Desai, C., 2000

Mechanics of Periodic Structures, Asymptotic Analysis of Heterogeneous Systems , Manevitch, L. I., 2001

Mechanics of Solid Materials , Lemaitre, J. and Chaboche, J. L., 1994

Mechanics of Solids , Fenner, R. T., 1991

Mechanics of Solids , Lardner, T. J. and Archer, R. R., 1994

Mechanics of Solids , Ross, C. T. F., 2000

Mechanics of Solids and Fluids , Ziegler, F., 1995

Mechanics of Solids and Structures , Rees, D. W. A., 1990

Mechanics of Structures: Variational and Computational Methods , Pilkey, W. D. and Wunderlich, W., 1993

Mechanics of Viscoelastic Solids , Drozdov, A. D., 1998

Mesomechanical Constitutive Modeling , Kafka, V., 2001

Mesoscopic Dynamics of Fracture , Kitagawa, H. et al., eds., 1998

Metal and Ceramic Based Composites , Mileiko, S. T., 1997

Metal Failures: Mechanisms, Analysis, Prevention , McEvily, A. J., 2001

Metal Fatigue in Engineering , Stephens, R. I. et al., 2000

Metal Forming Analysis , Wagoner, R. H. and Chenot, J. L., 2001

Micromechanics: Overall Properties of Heterogeneous Materials , Nemat-Nasser, S. and Hori, M., 1999

Modal Analysis , Fu, Z. F. and He, J., 2001

Modal Testing: Theory, Practice and Application , Ewins, D. J., 1999

Modelling and Analysis of Reinforced Concrete Structures for Dynamic Loading , Meyer, C., ed., 1998

Modelling and Control in Solid Mechanics , Khludnev, A. M. and Sokolowski, J., 1997

Modelling of Material Damage and Failure of Structures , Skrzypek, J. J. and Ganczarski, A., 1999

Modern Structural Analysis: The Matrix Method Approach , Armenakas, A. E., 1990

Multibody Dynamics With Unilateral Contacts , Pfeiffer, F. and Glocker, C., 1996

Multiscale Deformation and Fracture in Materials and Structures , Chuang, T. J. and Rudnicki, J. W., eds., 2000

N

New Developments in Contact Problems , Wriggers, P. and Panatiotopoulos, P., eds., 1999

Non-Classical Problems in the Theory of Elastic Stability , Elishakoff, I. et al., 2001

Non-Destructive Testing , Halmshaw, 1991

Non-Linear Calculations of Composite Sections and Semi-Continuous Joints , Huber, G., 2000

Non-Linear Elastic Deformations , Ogden, R. W., 1997

Non-Linear Static and Cyclic Analysis of Steel Frames With Semi-Rigid Connections , Chan, S. L. and Chui, P. T., eds., 1999

Nondestructive Evaluation: A Tool in Design, Manufacturing, and Service , Bray, D. E. and Stanley, R. K., 1996

Nonlinear Analysis of Structures , Sathyamoorthy, M., 1997

Nonlinear Analysis of Thin-Walled Structures , Doyle, J. F., 2001

Nonlinear and Stochastic Dynamics of Compliant Offshore Structures , Han, S. M. and Benaroya, H., 2002

Nonlinear Computational Structural Mechanics, New Approaches and Non-Incremental Methods of Calculation , Ladeveze, P., 1999

Nonlinear Crack Models for Nonmetallic Materials , Carpinteri, A., ed., 1999

Nonlinear Dynamics and Stochastic Mechanics , Kliemann, W. and Namachchivaya, S., 1995

Nonlinear Elasticity: Theory and Applications , Fu, Y. B. and Ogden, R. W., eds., 2001

Nonlinear Fracture Mechanics for Engineers , Saxena, A., 1998

Nonlinear Mechanics , Fertis, D. G., 1998

Nonlinear Problems of Elasticity , Antman, S. S., 1995

Nonlinear Solid Mechanics, A Continuum Approach for Engineering , Holzapfel, G. A., 2000

Nonlinear Stability of Structures , Kounadis, A. N. and Kratzig, W. B., eds., 1995

Nonlinear Theory of Elasticity , Lurie, A. I., 1990

Nonlinear Theory of Shallow Shells , Vorovich, I. I. and Lebedev, L. P., eds., 1999

Nonlinear Theory of Shells Through Variational Principles , Valid, R., 1995

Numerical Analysis of Reinforced Concrete Structures , Avram, C., 1993

Numerical Fracture Mechanics , Aliabadi, M. H. and Rooke, D. P., 1991

Numerical Methods for Experimental Mechanics , Berghaus, D., 2001

Numerical Methods in Structural Mechanics , Bittnar, Z. and Sejnoha, J., 1996

O

On Wave Propagation in Elastic Solids With Cracks , Zhang, C. and Gross, D., 1997

Optical Methods in Experimental Solid Mechanics , Laermann, K. H., ed., 2000

P

Peterson's Stress Concentration Factors , Pilkey, W. D., 1997

Photomechanics , Rastogi, P. K., 1999

Plastic Bending: Theory and Applications , Yu, T. X. and Zhang, L. C., 1996

Plastic Limit Analysis of Plates, Shells and Disks , Save, M. A. et al., 1997

Plasticity, Mathematical Theory and Numerical Analysis , Han, W. and Reddy, B. D., 1999

Plasticity, Theory and Engineering Applications , Kaliszky, S., 1989

Plasticity and Creep Theory, Examples, and Problems , Skrzypek, J. and Hetnarski, R., 1993

Plasticity for Engineers, Theory and Applications , Calladine, C. R., 2000

Plasticity Theory , Lubliner, J., 1998

Plates, Laminates and Shells. Asymptotic Analysis and Homogenization , Lewinski, T. and Telega, J. J., 2000

Poroelastic Structures , Cederbaum, G. et al., 2000

Post-Tensioned Concrete Floors , Williams, M. and Khan, S., 1995

Practical Analysis for Semi-Rigid Frame Design , Chen, W. F., ed., 2000

Practical Fracture Mechanics in Design , Blake, A., 1996

Principles of Composite Material Mechanics , Gibson, R. F., 1993

Principles of Solid Mechanics , Richards, R., 2000

Principles of Vibration , Tongue, B. H., 1996

Probabilistic Structural Dynamics: Advanced Theory and Applications , Lin, Y. K. K. and Cai, G. Q., 1994

Problems of Nonlinear Deformation , Grigolyuk, E. I. and Shalashilin, V. I., 1991

Programming the Dynamic Analysis of Structures , Bhatt, P., 2002

Progress in Computational Analysis of Inelastic Structures , Stein, E., Ed., 1993

R

Random Vibration and Spectral Analysis , Preumont, A., 1994

Random Vibration of Mechanical and Structural Systems , Soong, T. T. and Grigoriu, M., 1992

Reinforced Concrete Slabs , Park, R. and Gamble, W. L., 1999

Roark's Formulas for Stress and Strain , Young, W. C., 1989 (6th Ed.)

Rolling Contact Phenomena , Jacobson, B. and Kalker, J. J., eds., 2000

S

Shear Deformable Beams and Plates , Wang, C. M. et al., 2000

Simplified Mechanics and Strength of Materials , Parker, H. and Ambrose, J. E., 1992

Simulation-Based Reliability Assessment for Structural Engineers , Marek, P. et al., 1995

Smart Structures , Srinivasan, A. V. and McFarland, D. M., 2000

Solid Mechanics, An Introduction , Ward, J. P., 1992

Solid Mechanics in Engineering , Parnes, R., 2001

Solution of Crack Problems, The Distributed Dislocation Technique , Hills, D. A. et al., 1996

Solving Large-Scale Problems in Mechanics , Papadrakakis, M., ed., 1993

Solving Solid Mechanics Problems With MATLAB5 , Boulahbal, D. and Leask, R. L., 1999

Some Engineering Applications in Random Vibrations and Random Structures , Maymon, G., 1998

Stability and Nonlinear Solid Mechanics , Nguyen, Q. S., 2000

Stability Design of Steel Frames , Chen, W. F. and Lui, E. M., 1991

Stability Design of Semi-Rigid Frames , Chen, W. F. et al., 1995

Stability in Viscoelasticity , Drozdov, A. D. and Kolmanovskii, V. B., 1994

Stability of Elastic Structures , Alfutov, N. A., 2000

Stability of Stochastic Elastic and Viscoelastic Systems , Potapov, V. D., 1999

Stability Problems in Fracture Mechanics , Bolotin, V. V., 1996

Static and Dynamic Analysis of Structures , Doyle, J. F., 1991

Statically Indeterminate Structures , Rumman, W. S., 1991

Statics and Mechanics of Materials , Riley, W. F. et al., 1995

Stiffness and Damping in Mechanical Design , Rivin, E. I., 1999

Stochastic Analysis of Structural and Mechanical Vibrations , Lutes, L. D. and Sarkani, S., 1997

Stochastic Processes and Random Vibrations: Theory and Practice , Solnes, J., 1997

Strain and Stress Analysis by Holographic and Speckle Interferometry , Shchepinov, V. P. et al., 1996

Strain Measurements and Stress Analysis , Khan, A. S. and Wang, X., 2001

Strength and Fracture of Engineering Solids , Felbeck, D. K. and Atkins, A. G., 1996

Strength and Fracture of Glass and Ceramics , Mencik, J., 1992

Strength and Related Properties of Concrete: A Quantitative Approach , Popovics, S., 1998

Strength of Materials , Seed, G. M., 2001

Strength of Materials and Structures , Ross, C. T. and Chiver, L. A., 1999

Stress Analysis of Fiber-Reinforced Composite Materials , Hyer, M. W. and White, S. R., 1997

Stress Intensity Factors and Weight Functions , Fett, T. and Munz, D., 1997

Stresses in Plates and Shells , Ugural, A., 1998

Strip Method Design Handbook , Hillerborg, A., 1996

Structural Analysis , Heyman, J., 1998

Structural Analysis , Hibbeler, R. C., 1998

Structural Analysis , Kassimali, A., 1999

Structural Analysis , McCormac, J. C., 1997

Structural Analysis: A Unified Classical and Matrix Approach , Ghali, A. et al., 1998

Structural Analysis and Design , Harrison, H. B., 1990

Structural Analysis of Composite Beam Systems , Skudra, A. M. et al., 1991

Structural and Residual Stress Analysis by Nondestructive Methods , Hauk, V., ed., 1997

Structural and Stress Analysis , Megson, T. H. G., 1995

Structural Dynamics: Models, Methods, Examples , Meskouris, K., 2000

Structural Dynamics: Theory and Applications , Tedesco, J. W. et al., 1999

Structural Dynamics: Theory and Computation , Paz, M., 1997

Structural Dynamics for Structural Engineers , Hart, G. C. and Wong, K., 2000

Structural Dynamics in Aeronautical Engineering , Bismarck-Nas, M. N., 1999

Structural Dynamics in Practice: A Guide for Professional Engineers , Bolton, A., 1994

Structural Impact , Jones, N., 1997

Structural Life Assessment Methods , Liu, A. F., 1998

Structural Mechanics , Bakhoum, M., 1992

Structural Mechanics , Durka, M. et al., 1997

Structural Mechanics: A Unified Approach , Carpinteri, A., 2000

Structural Mechanics: Graph and Matrix Methods , Kaveh, A., 1995

Structural Mechanics of Buried Pipes , Watkins, R. K. and Anderson, L. R., 1999

Structural Modeling and Analysis , Dym, C. L., 1997

Structural Plasticity: Theory, Problems and CAE Software , Chen, W. F. and Zhang, H., 1990

Structural Reliability, Analysis and Prediction , Melchers, R. E., 1999

Structural Reliability Methods , Ditlevsen, O. and Madsen, H. O., 1996

Structural Stability Design, Steel and Composite Structures , Fukumoto, Y., 1997

Structural Vibration Analysis and Damping , Beards, C. F., 1996

Superplastic Flow: Phenomenology and Mechanics , Padmanabhan, K. A. et al., 2001

Superplasticity in Metals and Ceramics , Nieh, T. G. et al., 1997

T

Tall Building Structures: Analysis and Design , Smith, B. S. and Coull, A., 1991

Techniques of Isodyne Stress Analysis , Pindera, J. T., 2000

The Behavior of Shells Composed of Isotropic and Composite Materials , Vinson, J. R., 1992

The Mathematical Theory of Plasticity , Hill, R., 1999

The Nonlinear Theory of Elastic Shells , Libai, A. and Simmonds, J. G., 1998

Theoretical and Experimental Modal Analysis , Maia, N. M. M. and Silva, J. M. M., 1997

Theory and Analysis of Elastic Plates , Reddy, J. N. N., 1999

Theory and Design of Plate and Shell Structures , Jawad, M., 1994

Theory of Elastic Stability: Analysis and Sensitivity , Godoy, L. A. A., 2000

Theory of Elasticity , Kosevich, A. M. et al., 1995

Theory of Elasticity for Scientists and Engineers , Atanackovic, T. and Guran, A., 2000

Theory of Stability of Continuous Elastic Structures , Como, M. and Grimaldi, A., 1995

Theory of Vibrations With Applications , Thomson, W. T. and Dahleh, M. D., 1998

Thermomechanical Fatigue and Fracture , Aliabadi, M. H., ed., 2001

Thin Plates and Shells: Theory, Analysis and Applications , Ventsel, E. and Krauthammer, T., 2001

Thin-Walled Cellular Structures - Methods for Their Analysis , Ignatiev, V. A., 1999

Thin-Walled Structures With Structural Imperfections , Godoy, L. A., 1996

Three-Dimensional Contact Problems , Alexandrov, V. M. and Pozharskii, D. A., 2001

Topics in the Mathematical Modelling of Composite Materials , Cherkaev, A. and Kohn, R., eds., 1997

U

Ultimate Limit-State Design of Concrete Structures: A New Approach , Kotsovos, M. D. and Pavlovic, M. N., 1999

Unified Constitutive Laws of Plastic Deformation , Krausz, A. S. and Krausz, K., eds., 1996

Unified Plasticity for Engineering Applications , Bodner, S. R., 2001

V

Variational and Potential Methods in the Theory of Bending of Plates With Transverse Shear Deformation , Chudinovich, I. K. and Constanda, C., 2000

Vibration Analysis of Plates by the Superposition Method , Gorman, D. J., 1999

Vibration for Engineers , Dimarogonas, A., 1996

Vibration of Mechanical and Structural Systems: With Microcomputer Applications , James, M. L. L. et al., 1994

Vibration of Mindlin Plates, Programming the p-Version Ritz Method , Liew, K. M. et al., 1998

Vibration of Solids and Structures Under Moving Loads , Fryba, L., 1999

Vibration Testing: Theory and Practice , McConnell. K. G., 1995

Vibrations, Dynamics and Structural Systems , Mukhopadhyay, M., 2000

Vibrations of Elastic Plates , Yu, Y. Y., 1996

Vibrations of Elasto-Plastic Bodies , Palmov, V., 1998

Vibrations of Shells and Rods , Le, K. C., 1999

Vibrations of Strongly Nonlinear Systems , Babitsky, V. I. and Krupenin, V. L., 2001

Vibrations of Structures and Machines , Genta, G., 1999

Viscoelastic Solids , Lakes, R. S., 1998

W

Wind Loads on Structures , Dyrbye, C. and Hansen, S. O., 1997