CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 -...

9
Scotch Valley Roof CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010

Transcript of CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 -...

Page 1: CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010.

Scotch Valley Roof

CARP12 text book / or workbook P 95With additional notes for explanation

M. S. Martin

July 2005 - Reviewed June 2010

Page 2: CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010.
Page 3: CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010.

1. Locate Height of Minor Span Ridge

Cut a minor roof rafter and place it against the major roof rafter to locate this point.

Page 4: CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010.

Length of Ridge

Page 5: CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010.

2. Position the Ridge and Common Rafters to Minor Roof

Include a blocking piece to take end of ridge

Page 6: CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010.

3. Measure length of Lay Board

Use a block to locate positions.

Page 7: CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010.

4. Measure Creeper Rafters to cut in.

Page 8: CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010.

Scotch Valley Complete

Check Rafters as you install them.

Page 9: CARP12 text book / or workbook P 95 With additional notes for explanation M. S. Martin July 2005 - Reviewed June 2010.

Required Bevels

Plumb bevel C/R

Level Bevel C/R(base of creeper & Top of ridge)

Edge Bevel Creeper(Bottom edge of creeper & top of lay-board)

Edge Bevel Purlin(Bottom of Lay-board)