Cardio Bike

download

of 24

  • date post

    16-Apr-2015
  • Category

    Documents

  • view

    40
  • download

    3

Embed Size (px)

Transcript of Cardio Bike

Index 1. COMPONENTS 2. GENERAL INFORMATION 3. MEDEL CARDIO XT BIKE FUNCTIONS 4. TIME MODE (TIME) 5. SPEED MODE (AVG) 6. MAX SPEED MODE (MAX) 7. DISTANCE MODE (DST) AND WILL SIZE MODE 8. ODOMETER MODE (ODO) 9. ATM MODE (ATM) 10. HTM MODE (HTM) AND HEART RATE PROFILE 11. CALORIE MODE (KCAL) 12. RESET THE UNIT 13. HOW TO REPLACE BATTERIES 14. WARRANTY 39 40 42 43 46 34 36 38 26 27 28 31 32 33

EN

25

EN

1. COMPONENTS1. 2. 3. 4. 5. 6. Main unit Heart rate belt Mounting bracket Speedometer sensor Wheel magnet Cable ties

3

1

2 5 426

6

2. GENERAL INFORMATIONThank you for choosing the MEDEL CARDIO XT BIKE as your personal trainer. In order to be able to make the best use of this device, please read the instruction manual carefully. Do not discard keep the manual for future reference Important: please NOTE: that the Heart Rate Monitor is NOT a medical device and is not to be used as such.

EN

27

EN

3. MEDEL CARDIO XT BIKE FUNCTIONS

2 1 3

4

5 6

7

8 9 10 11 12

13 15 14 16

1. 2. 3. 4. 28

Real Time 12/24 Hr Speed with Comparison Mode Current Speed will be displayed in every second. Comparison with average speed will be taken. It will show UP or DOWN icon when it is riding. Average Speed Mode (AVG). Show the average speed. AVS is generally defi-

ned as, AVG = Total Effective Distance / Total Effective Ride Time. 5. Maximum Speed Mode (MAX). Show the maximum speed of the trip. 6. Trip Meter Mode (DST). Show the trip distance of riding. Unit is in Km or Mile. 7. Odometer Mode (ODO). Odometer is the accumulative distance of the unit after power up or reset. Unit is in Km or mile. 8. Auto Ride Timer Mode (ATM). Display the time that connected to bike sensor. 9. Wheel Size Mode. 1 programmable wheel size (wheel circumference in mm). 10. Scan Function Mode. The DST, ATM, ODO, AVG, MAX will be displayed for 2 seconds cyclin. 11. Heart Rate Mode. Show the current heart rate. HR measurement is in beats per minute ranged from 30 to 240. The heart rate icon will shown on the screen when the heart rate sensor is connected, the outer frame will flash at 2Hz. If No heart rate signal input, after 90 seconds, the current value of heart rate will display 29

EN

EN 12. 13. 14. 15. 30

with wireless receiver OFF (the average and maximum heart rate value is unaffected). To start the heart rate measuring, press [START] to activate HTM mode, the receiver will turn ON again. Average Heart Rate Mode. Show the average heart rate of the time from stopwatch AVG HR = Total number of heart beats (impulses) / time of stopwatch. 3 target zones setting. Flash the heart rate icon (inside and outside) when the heart rate is greater than the defined heart rate settings. Flash the heart rate icon (inside and outside) when the heart rate is smaller than the defined heart rate settings. Flash the heart rate icon (outside only) when the heart rate is in the range of the defined heart rate settings. Calorie Mode - Calculate the calorie consumption depend on following situation: Heart rate receiving and bike riding. Heart rate receiving and Bike is stop. Energy Save Function. If No any signal connected or key pressed, after 5 minutes, the product will go to sleep mode. Only the time will display on the LCD.

Input Speed signal or press any key can wake up product. It will wake up on current mode. The LCD will be OFF (no any display) when time reach 12:00:00am or 00:00:00 except the product is riding or the product go to sleep mode after 12:00:00am or 00:00:00. 16. Bike Mount.

EN

4. TIME MODE (TIME)1. 2. 3. 4. 5. 6. 7. When the system is Power Up, it will display the Time mode, The Time logo will display. The current time will show on the second line of the display. Show the real time clock. It supports 12 or 24 hour mode. Press [START] to wake up heart rate receiver when it turned off. Press [MODE] go to next mode AVG Speed Mode. The first line of the display is showing current speed. The third line of the display is showing current heart rate and heart rate profile.

SET TIME MODE When the system is Power Up, it will display the31

EN

Time mode. Press and hold [SET] with 2 seconds to edit the Time mode. Press [MODE] to change to the Time mode, if the current mode is not Time mode. Press [START] to switch 12Hr or 24Hr display mode. Press [MODE] to confirm and jump to set time (HH:MM:SS). Press [START] to advance the value of digit. Press [MODE] to confirm and jump to next digit to continue editing. After completed editing, press [SET] to jump back to Clock mode.

5. SPEED MODE (AVG)1. 2. 3. 4.32

When the system is Power Up, it will display the Time mode. Press [MODE] to change to AVG mode. The current speed will show on the first line of the display. The average speed will show on the second line

5. 6. 7. 8.

of the display. The heart rate and heart rate profile will show on the third line of display. Press [MODE] go to next mode MAX Speed Mode. Press and Hold [START] for 2 second to reset data to zero. Press [START] to wake up heart rate receiver when it turned off.

EN

NOTE When the end user is riding, the ride icon will be shown. Up icon will be indicated when the current speed is larger than the average speed. Down icon will be indicated when the current speed is smaller the average speed.

6. MAX SPEED MODE (MAX)1. In AVG Speed Mode press [MODE] to this mode, the MAX logo will display.33

EN

2.

The maximum speed will show on the second line of the display.

NOTE: Press and Hold [START] to initial ride value. Press [START] to wake up heart rate receiver when it turned off. Press [MODE] go to next mode DST Mode. The first line of the display is showing current speed. The third line of the display is showing current heart rate and heart rate profile.

7. DISTANCE MODE (DST) AND WILL SIZE MODE1. 2. In MAX Speed Mode press [MODE] to this mode, the DST logo will display. The distance will show on the second line of the display.

34

NOTE: Press and Hold [SET] to Set Wheel Size Mode. Press and Hold [START] to initial ride value. Press [START] to wake up heart rate receiver when it turned off. Press [MODE] go to next mode ODO Mode. The first line of the display is showing current speed. The third line of the display is showing current heart rate and heart rate profile. SET WHEEL SIZE MODE 1. When the system is Power Up, it will display the Time mode. 2. Press [MODE] to change to the DST mode. 3. Press and hold [SET] with 2 seconds to edit the Wheel Size (default wheel size is 2085, Maximum is 3999). 4. Press [START] to advance the value of digit. 5. Press [MODE] to confirm and jump to next digit to continue editing; 6. After completed editing, press [SET] to jump35

EN

EN

back to DST mode.

8. ODOMETER MODE (ODO)1. 2.36

In Distance Mode press [MODE] to this mode, the ODO logo will display. The ODO value will show on the second line of the display.

NOTE: Press and Hold [SET] to Set Odometer Mode Press and Hold [START] to change speed and distance unit (KM or Mile) Press [START] to wake up heart rate receiver when it turned off. Press [MODE] go to next mode ATM Mode. The first line of the display is showing current speed. The third line of the display is showing current heart rate and heart rate profile. SET ODOMETER MODE 1. When the system is Power Up, it will display the Time mode. 2. Press [MODE] to change to Odometer (ODO) mode. 3. Press and hold [SET] with 2 seconds to edit the odometer (default is 00000, Maximum is 99999). 4. Press [START] to advance the value you desired.37

EN

EN

5. 6. 7.

Press [MODE] to confirm and jump to next digit to continue editing. After you have completed, press [SET] to jump back to odometer mode. Press and hold [START] in Odometer mode can switch the speed/distance unit KM or Mile.

9. ATM MODE (ATM)1. 2. 3. In Odometer Mode press [MODE] to this mode, the ATM logo will display. The ride time value will show on the second line of the display. This value is show the time which connected to bike sensor.

NOTE: Press and Hold [START] to initial ride value. Press [START] to wake up heart rate receiver when it turned off. Press [MODE] go to next mode HTM Mode. The first line of the display is showing current speed.The third line of the display is showing current heart rate and heart rate profile.38

10.HTM MODE (HTM) AND HEART RATE PROFILE1. 2. In ATM Mode press [MODE] to this mode, the HTM logo will display. The HTM value will show on the second line of the display. The timer will be counting when the heart rate is detected. The average heart rate and heart rate profile will show on the third of the display (AVG icon will shown under the heart rate icon).

EN

3.

NOTE: Press and Hold [START] to initial heart rate value. Press [START] to wake up heart rate receiver when it turned off. Press [MODE] go to next mode Calorie Mode. The first line of the display is showing current speed. SET HEART RATE PROFILE 1. When the system is Power Up, it will display the Time mode.39

EN

2. 3. 4.

5. 6. 7. 8.

Press [MODE] to change to HTM mode, you can either choose as your target zone. Press [SET] to select profile of heart rate to edit. Press and hold [SET] with 2 second to edit the heart rate limit (default Upper is 180 and Lower is 60, Maximum Upper and Lower is 299) that in selected target zone. Press [START] to advance the value of upper and lower limits you desired. Press [MODE] to confirm and jump to next digit to continue editing. After you have completed, press [SET] to jump back to Heart Rate mode. During