Capral Aluminium INDUSTRIAL SOLUTIONS NATIONAL CATALOGUE · Capral Aluminium INDUSTRIAL SOLUTIONS...

1800 254 254www.capral.com.au/industrialsolutions

Capral Aluminium INDUSTRIAL SOLUTIONSNATIONAL CATALOGUE

Aluminium Product Catalogue

1

CO

NT

EN

TS

Contents

Introduction 2

Capral Aluminium Industrial Solutions 3

Delivering Aluminium Solutions 4

Fabrication Solutions 5

National Branch Network 6

Aluminium Product 8 Technical Support 8Care and Maintenance 9Rules to Avoid Corrosion 10Bending Information 11

Using this Catalogue 12

Extrusions 13Extrusion Alloy Table 14Recommended Bending Radii Table 15Flat Bar 16Solid Square Bar 19Angle 20Round Tube 23Solid Round Bar 27Channel 28Rectangular Box 30Square Box 33T–Bar 36I–Beam 37Miscellaneous Sections 38

Sheet & Plate 39 Sheet Alloy Table 40Recommended Bending Radii Table 41Sheet & Plate - 5005 42Sheet PVC Coated - 5005 43Marine Sheet - 5052 44Sheet - 5251 44Sheet - 5052 Sign Sheet 45Plate - 5083 46Plate - 5052 47Plate - 5454 Mill Bright 47Treadplate 48Propellor Plate 49Mesh 49Coil 50

Building Materials 51Louvres & Screening 52Slatted Screen System 53Fencing & Balustrading Extrusions 54

Transport 56

Marine 61Extrusions 62Round Tube 65Solid Round Bar 66Solid Square Bar 66Rectangular Box 67Square Box 67T–Bar 68I–Beam 69Channel 70Angle 71Flat Bar 72Marine Sheet - 5052 74Plate - 5053 76

Signage 77

Cold Storage 79

Important Safety Information 82Safety at our Sites 82Customer Pickups and Exclusion Zones 83Load Restraint 84

Notes 86

Disclaimer 88


2

INT

RO

DU

CT

ION

Introduction

Thank you for choosing Capral Aluminium Industrial Solutions.

Inside this catalogue you’ll nd:• Our comprehensive range of stocked aluminium materials• Key product measurements and technical information• Information on the Capral Aluminium Industrial Solutions business• Contact details for our national branch network• Important safety information.

The technical information contained in this publication is provided as a service for general guidance only and in no way replaces the services of professional consultants in relation to the use of Aluminium products.

Terms and Conditions of Sale

All sales with Capral Aluminium Industrial Solutions are subject to the Capral Aluminium standard terms and conditions of sale.

For a full copy of Capral Aluminium ’s terms and conditions please visit http://www.capral.com.au/Terms-of-Trade.

Customer Feedback

Capral Aluminium Industrial Solutions appreciates your business and welcomes your feedback. We are always looking for better ways to help improve our business and work with you to achieve the best outcomes.

Email us direct on: [email protected] to speak to your nearest branch directly by calling 1800 254 254.


3

CA

PR

AL

AL

UM

INIU

M

Capral Aluminium Industrial Solutions

Capral Aluminium Industrial Solutions is one of Australia’s leading providers of Aluminium product and associated services. We work with key customers across a range of industries to deliver the best outcomes using our expansive product range and services capability.

Our dedicated personnel bring experience and technical capability that enables us to work closely and partner with your industry. By sourcing both domestically and internationally, Capral Aluminium Industrial Solutions is experienced in supplying the most suitable materials for the job. We have long standing relationships with some of the world’s leading aluminium mills and stock a comprehensive range of aluminium plate, sheet, mesh, treadplate as well as standard geometric and customer exclusive extrusions.

As a specialist supplier to the Marine, Transport, Building, Resources and Signage industries (to name just a few), Capral Aluminium Industrial Solutions is dedicated to Delivering Aluminium Solutions to our customers.


4

DE

LIV

ER

ING

SO

LU

TIO

NS

Delivering Aluminium Solutions

Capral Aluminium Industrial Solutions prides itself on being able to deliver much more to our customers than just the supply of materials. We are able to offer you an abundance of solutions that alleviate your risk, cost and stress. We bene t from all the technical and commercial backing only a big business like Capral Aluminium can provide.

We can offer:• Customer speci c ranges and development, as well as stock holding• Consignment Stock Offers• Supply Chain Management and Expertise (Onshore and Offshore)• Expedited Delivery Scheduling• Project Support • Credit and Finance Management• Technical Support• Componentry and Sub-Assemblies• Fabrication Solutions

These are just some of the solutions that take the work out of our customers hands, allowing them to concentrate on what they do best.

To further discuss the ways in the which Capral Aluminium Industrial Solutions can deliver solutions to your business please contact your nearest branch or learn more at www.capral.com.au/IndustrialSolutions


5

Fabrication Solutions

Capral Aluminium Industrial Solutions is a trusted provider of a wide range of fabrication solutions.

Our CNC routers enable Capral Aluminium to cut intricate shapes from aluminium plate. This enables more ef cient assembly processes through increased accuracy of nished goods, reducing scrap and minimising customers warehouse space.

In addition to routing Capral Aluminium can manage a number of fabrication services for customers, including:

• CNC Routing• Cutting• Precision Cutting • Drilling and Tapping• Punching / Slotting• Knurling• Chamfering

• Polishing• Coil Recti cation• Rumbling• Bending• Welding• Anodising• Powder Coating

To further discuss the ways in the which Capral Aluminium Industrial Solutions can deliver solutions to your business, please contact your nearest branch or learn more at www.capral.com.au/IndustrialSolutions

FAB

RIC

AT

ION

SO

LU

TIO

NS


6

Sydney1/25 Wonderland Drive, Eastern Creek NSW Ph: (02) 8882 6666Email: [email protected]

Brisbane 5/268 Evans Road, Salisbury QLD Ph: (07) 3722 6300Email: [email protected]

Sunshine Coast 17 Kerryl Street, Kunda Park QLD Ph: (07) 5445 1522Email: [email protected]

Melbourne12B Kitchen Road, Dandenong VIC Ph: (03) 9212 2617Email: [email protected]

Adelaide 70 Grand Junction Road,Kilburn SA Ph: (08) 8304 7525Email: [email protected]

Perth 6 Wellard Street, Bibra Lake WA Ph: (08) 6499 1200Email: [email protected]

BR

AN

CH

NE

TW

OR

K

NATIONAL 1800 254 254

National Branch Network

Capral Aluminium Industrial Solutions is connected through our Australia wide distribution network of 6 branches, in addition to this we are also connected to the greater Capral Aluminium Metro and Regional Distribution network. Our philosophy is that wherever a customer is they should feel that Capral Aluminium is operating right next door.


7

BR

AN

CH

NE

TW

OR

K

Delivery

We provide next day delivery on stocked items in the majority of metro locations and aim to deliver product according to customer speci cations. For speci c delivery information and timing please contact your local branch.

Pick-Up’s

Need Aluminium in a hurry? Take advantage of our same day pick up service.Please observe Capral Aluminium’s load restraint and safety policies - detailed from page 72.

BRANCH PICK-UP TIMES

Sydney Monday – Friday | 8.00am – 3.00pm

Brisbane Monday – Friday | 10.00am - 1.30pm

Sunshine Coast Monday – Friday | 8.00am – 3.00pm

Melbourne Monday – Friday | 8.00am – 3.00pm

Adelaide Monday – Friday | 8.00am – 3.00pm

PerthMonday to Friday

6.30am – 8.30am & 1.30pm – 3.30pm

VISA/MASTERCARD/EFTPOS are all accepted as payment methods. All cheques must be processed before goods will be released for sale. No cash is accepted or kept on premises.

For speci c information on customer pick-up’s please contact your local branch or learn more about your local at www.capral.com.au/IndustrialSolutions


8

Technical Support

At Capral Aluminium Industrial Solutions, we recognise how important it is for your partner to be able to offer both technical support and expertise. Our experience allows us to offer both pre and post sales technical support, which makes us the supplier of choice for many of Australia’s largest manufacturers.

Our experienced staff participate in rigorous training and in eld experience. They are backed by in house metallurgists and the full functional support only a large company like Capral Aluminium is able to offer.

So if you have a technical question, or would like to explore what could be a more suitable solution for your requirements, contact your nearest branch or learn more at www.capral.com.au/IndustrialSolutions

AL

UM

INIU

M P

RO

DU

CT


9

Care and Maintenance of Aluminium

Aluminium is one of the easiest materials to keep in good condition. It has a high natural resistance to corrosive conditions normally encountered during shipment and storage and a little care will maintain its original appearance for a long time. The principal things to guard are conditions that might cause surface abrasions or water stains. Aluminium alloys require little or no maintenance to retain their original mechanical properties. However, without regular cleaning surfaces can become stained, particularly when under prolonged exposure on industrial sites. Rubbing down with ne wire wool and methylated spirits may clean mill- nished aluminium. Proprietary cleaners are available for mill- nished surfaces.

Capral Aluminium make every effort to pack aluminium so that “rub marks” do not occur during shipment and so that it remains dry. All incoming shipments should be inspected promptly.

Condensation is perhaps the most troublesome cause of water stains. Under severe conditions; condensation may also cause surface deterioration, which may only become apparent if the material is subsequently etched and anodised. It may be prevented by avoiding conditions where the temperature of the metal drops below the dew point of the surrounding air, or, conversely, conditions where the moisture of the air increases enough to carry the dew point above the metal temperature. It is thus important to ensure that a sudden fall in temperature or increase in humidity does not occur in the places of storage. Aluminium packed in original boxes should never be left in the open, because the greater variation in temperature and humidity outdoors increases the possibility of condensation.

In storing, it is desirable to avoid contact between it and other metals since this sometimes results in scratches or other marks. The use of wood-faced shelving racks and bins is recommended. It is also good practice to keep aluminium away from caustics, nitrates, phosphates and some acids.

AL

UM

INIU

M P

RO

DU

CT

Information is obtained from the Australian Aluminium Council (AAC)


10

Rules to Avoid Corrosion

Since the corrosion behaviour of alloyed aluminium is in uenced by the physical conditions of the environment, contact with dissimilar metals and by the presence of crevices, the design of equipment made with aluminium can have an appreciable in uence on the nature and rate of corrosion.

• Seal all joints and bolt holes• Eliminate corners and crevices, which are dif cult to clean• Butt weld where possible• Avoid dissimilar metal contact whenever possible

Timber

Dry timber has no reaction to aluminium but timber that is unseasoned or in damp conditions should be coated with an aluminium or bituminous paint. In very aggressive environments (immersion) a non-absorbent insulating gasket should be inserted between timber and aluminium contact surfaces. Timber that has been treated may require special consideration and advice should be sought from the supplier.

Insulation

Foam, felt, re retardant may cause corrosion of aluminium if they become wet when in contact with it. Apart from the possibility of attack from leached-out chemicals, corrosion may result from a reduction in oxygen caused by wet insulation. The aluminium may be protected by a barrier.

Concrete

No protection under perfectly dry conditions. In practice however this is rarely achieved, all aluminium surfaces in direct contact with concrete should be coated with bituminous paint. Steelreinforcing used in concrete should never be allowed to come into contact with the aluminium.

Chemicals

A direct chemical attack of aluminium only occurs to any great extent in strong acid or alkaline conditions. In some cases the temperature may signi cantly alter the rate of chemical reaction or be a major factor in initiating chemical attack

AL

UM

INIU

M P

RO

DU

CT

Information is obtained from the Australian Aluminium Council (AAC)


11

Bending Information

There are several types of forming machines suitable for bending aluminium sections. The choice depends upon the class of section, whether solid, open or hollow; the range of support tooling available; the alloy and temper. Tubing is by far the most commonly bent form of aluminium.

Bending may be carried out by four main methods:

The three roll bender has a central moveable roller, which is gradually depressed until the desired radius is obtained.

The three point bender has a similar method of operation, the load being either applied gradually or impacted.

The roll and point methods of bending are usually applied to robust sections. In both wrap and mandrel benders, it is possible to provide formers and other support tools which minimise the amount of buckling and enable tighter radii to be obtained.

The stretch former puts the section into tension and then, moving laterally, wraps it around a former. This method reduces the likelihood of compression failure.

Drawn tube should be speci ed where tight tolerances are required and where a higher level of mechanical property is necessary than is available in an extruded product. Drawn tube bends more consistently than extruded tube, again, due to the range in the mechanical properties.

Section bending is a specialist procedure and generally the soft tempers should be used, particularly for complex shapes.

AL

UM

INIU

M P

RO

DU

CT

Parts of the above information have been extracted from Aluminium Standards Data and Design – Wrought Products, published by the Australian Aluminium Council 2004


12

Using this Catalogue

Throughout the catalogue we have marked where a product size is typically stocked at a location.

Please note if you require a product in your state or territory that is not marked as stocked with an “X” by your local branch, this product may be made available via a stock transfer or mill order. Please contact your nearest branch for further details. Additional charges may apply.

By no means does the product range shown in this catalogue indicate the full range of materials available from Capral Aluminium Industrial Solutions. Please contact your nearest Aluminium branch if you can’t nd a material your after.

Extrusion Drawings are included as a guide only, detailed drawings and measurements are available on request.

Abbreviations

Note - An “X” in each state denotes where a product size is typically carried in stock at that local branch.

State Branch

NSW Sydney (Eastern Creek)

QLD Brisbane (Salisbury)

SC Sunshine Coast (Kunda Pk)

VIC Melbourne (Dandenong)

SA Adelaide (Kilburn)

WA Perth ( Bibra Lake)

MF Mill Finish

PVC PVC Coated

DNV Det Norske Veritas

MB Mill Bright

AC Anodised Clear

BLK Black

PW Pearl White

SM Surfmist Powdercoat

US

ING

TH

E C

ATA

LO

GU

E

For full branch details see page 8

13

EX

TR

US

ION

S


Extrusions


14

Extrusion Alloy Table

Alloy Typical

ApplicationHeat

TreatableCorrosion

ResistanceMachining Anodising Forming Welding

1200Commercially pure. Used where formability, not strength is required

No A D,C B A,C A

1350 Electrical conductors No A E,D B A,B A

2011Commercial machining alloy. Screw machine products

Yes D A,A D C,D D

6060Most commonly used extrusion alloy. Architectural and general purpose

Yes A,C C,C A A,C A

6063 Pipe railing, furniture, architectural extrusions Yes A D,C A B,C A

6463Trims requiring decorative nishing. Extruded architectural and trim sections

Yes A D,C A B,C A

6106General purpose, light structural applications

Yes A C,C A A,C A

6101 Electrical conductors Yes A,B C,D A C,B A

6005AStructural, transport and marine, for better surface nish and complexity

Yes B C,C B B,C A

6061Structural alloy with good corrosion resistance

Yes B D,C B A,C A

6082Heavy duty structures where good corrosion resistance is needed. Transport, marine etc.

Yes A,B C,B B A,C A

6351Heavy duty structures where good corrosion resistance is needed

Yes A C,C B C,C B

Alloys used by Capral Aluminium Industrial Solutions are highlightedRelative ratings are in decreasing order of merit = ABCDEWhere applicable, ratings for both annealed and hardest temper are given e.g : A,C

Table adapted from Aluminium Standards Data and Design – Wrought Products, Table 3.1, published by the Australian Aluminium Council 2004 and should be used as a guide only

EX

TR

US

ION

S



15

Recommended Bending Radii for Round Tube


Note : It is recommended that test bends are carried out before nal selection is made

Where D = outside diameter of tube (mm) t = wall thickness of tube (mm) r = inside radius of bend (mm)

Tube Size Radii for various Alloys & Tempers (mm)

Outside Diameter

(mm)

Wall Thickness

(mm)

1200-01350-0

6106-06060-06063-06061-0

6106-T46061-T46063-T46082-T4

6060-T56063-T5&T66101-T5&T6

6106-T6

6005A-T66061-T66082-T6

6060-T816063-T81

101 12 15 16 18 20 18

1.6 10 13 14 13 18 16

121 16 16 18 22 25 28

1.6 12 15 17 20 23 26

161 19 22 30 32 35 38

1.6 17 20 23 26 32 32

201 25 28 38 40 50 60

1.6 22 25 32 32 40 40

251.2 38 45 50 56 62 701.6 35 45 45 50 56 653 30 12 40 45 52 50

281.2 45 54 60 68 84 981.6 42 50 54 58 64 753 34 40 42 45 50 50

321.2 54 62 80 80 100 1102 42 48 58 60 80 803 38 42 46 52 60 70

401.6 64 72 90 95 120 1402 56 64 80 80 100 1103 48 54 60 70 80 85

50

1.6 90 112 125 140 175 2202 84 98 110 126 150 1903 70 80 95 110 125 1504 68 70 80 90 120 140

60

2 100 120 150 170 220 2603 100 105 120 130 180 2204 85 90 100 120 150 1906 70 80 90 100 130 150

80

2 165 190 220 240 340 4003 140 170 185 200 250 3204 135 150 160 180 220 2806 120 130 140 160 200 250

EX

TR

US

ION

S



Note: Not all products are available at all Capral Aluminium Branches. Check with your local Aluminium branch for product availability. Capral Aluminium reserve the right to change speci cations without notice.16

Flat Bar

Flat Bar Flat Bar

Material Code

Alloy Temper FinishWidth(mm)

Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

123134 6060 T5 MF 10 3 4000 0.32 X X X X123135 6060 T5 MF 12 3 4000 0.39 X126161 6060 T5 MF 16 3 4000 0.52 X X123136 6060 T5 MF 20 1.6 4000 0.34 X

100080 6060 T5 MF 20 3 4000 0.65 X X X X X X126163 6060 T5 MF 20 6 4000 1.30 X X X137380 6060 T5 MF 20 10 4000 2.16 X X X123137 6060 T5 MF 20 12 4000 2.60 X X110459 6060 T5 MF 25 3 4000 0.81 X X X X X X126145 6060 T591 MF 25 4 4000 1.08 X134737 6060 T5 MF 25 4 4000 1.08 X X145085 6060 T5 MF 25 4 6000 1.63 X110460 6060 T5 MF 25 6 4000 1.62 X X X X X X110458 6060 T5 MF 25 10 4000 2.71 X X X X123138 6060 T5 MF 25 12 4000 3.25 X110461 6060 T5 MF 32 3 4000 1.04 X X X X X X110462 6060 T5 MF 32 6 4000 2.08 X X X X X126187 6060 T5 MF 32 10 4000 3.46 X X X100081 6060 T5 MF 40 3 4000 1.30 X X X X X X126188 6060 T5 MF 40 4 4000 1.73 X X126190 6060 T5 MF 40 5 6000 3.24 X110464 6060 T5 MF 40 6 4000 2.60 X X X X X X110463 6060 T5 MF 40 10 4000 4.33 X X X X X X137381 6060 T5 MF 40 12 4000 5.20 X X X X221486 6060 T5 MF 40 16 4000 6.94 X X110465 6060 T5 MF 50 3 4000 1.62 X X X X X126193 6060 T5 MF 50 3 6500 2.64 X110466 6060 T5 MF 50 6 4000 3.25 X X X X X126196 6060 T5 MF 50 6 6000 4.86 X123140 6060 T595 MF 50 10 4000 5.15 X100082 6060 T5 MF 50 10 4000 5.42 X X X X X126197 6060 T5 MF 50 12 4000 6.48 X X X X X123139 6060 T5 MF 50 20 4000 10.84 X137382 6060 T5 MF 60 3 4000 1.95 X X X

Flat Bar Bulb Flat Bar

EX

TR

US

ION

S


Note: Not all products are available at all Capral Aluminium Branches. Check with your local Aluminium branch for product availability. Capral Aluminium reserve the right to change speci cations without notice. 17

Flat Bar - Continued

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

126199 6060 T5 MF 60 6 4000 3.89 X X X X126200 6060 T5 MF 60 10 4000 6.48 X X X148560 6060 T5 MF 60 12 4000 7.80 X126239 6005 T5 MF 60 12 6000 11.66 X126201 6060 T5 MF 80 3 4000 2.59 X X X X X X104563 6060 T5 MF 80 6 4000 5.20 X X X X X X126226 6061 T6 MF 80 6 6000 7.80 X123141 6060 T5 MF 80 10 4000 8.66 X X X X X X

286700 6060 T595 MF 80 10 4100 8.86 X110467 6060 T5 MF 80 12 4000 10.40 X X126205 6060 T5 MF 80 16 4000 13.82 X X X X123142 6060 T5 MF 100 3 4000 3.25 X X X X X126206 6060 T5 MF 100 3 5500 4.46 X126207 6060 T5 MF 100 4 4000 4.32 X X110456 6060 T5 MF 100 6 4000 6.50 X X X X X X286361 6060 T5 MF 100 6 6100 9.92 X285647 6060 T595 MF 100 10 4000 10.83 X110455 6060 T5 MF 100 10 4000 10.83 X X X X X X126210 6060 T5 MF 100 12 4000 12.96 X X X126264 6106 T6 MF 100 12 4000 13.00 X123144 6082 T6 MF 100 12 6000 19.44 X294617 6082 T5 MF 100 25 4000 27.10 X202039 6060 T5 MF 120 10 4000 13.01 X X222542 6060 T5 MF 150 6 4010 9.78 X126215 6060 T5 MF 160 6 4000 10.37 X X X X X123145 6060 T5 MF 160 10 4000 17.33 X X X X X126257 6082 T6 MF 160 12 6000 31.10 X222541 6060 T5 MF 200 6 4010 12.99 X

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

228673 6060 T5 MF 25.4 3.2 4000 0.82 X X X126156 6060 T5 MF 38 4.5 5500 2.49 X266180 6060 T5 MF 40 6 6000 3.90 X144599 6005A T5 MF 50 10 6500 8.43 X126152 6060 T591 MF 50.8 4.75 6000 3.89 X289144 6060 T5 MF 100 6 4000 6.40 X250055 6063 T5 MF 144 2.5 6000 5.84 X

171811 6082 T5 MF 160 12 3100 15.98 X

Flat Bar Radius Edge

EX

TR

US

ION

S



Structural Flat Bar

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

126232 6082 T5 MF - DNV 40 5 5850 3.16 X

303022 6082 T5 MF - DNV 40 5 6000 3.24 X

126233 6082 T5 MF - DNV 40 6 5850 3.80 X X X

172085 6082 T5 MF - DNV 40 10 5850 6.34 X

172086 6082 T5 MF - DNV 50 3 5850 2.38 X

126140 6005A T5 MF 50 4 6000 3.25 X

275370 6082 T5 MF 50 4 6000 3.25 X

303023 6082 T5 MF - DNV 50 5 6000 4.17 X

126235 6082 T5 MF - DNV 50 6 5850 4.75 X X X

126142 6005A T5 MF 50 6 6000 4.88 X X

178791 6082 T5 MF 50 6 6000 4.87 X

303024 6082 T5 MF - DNV 50 6 6000 4.87 X

126237 6082 T5 MF - DNV 50 8 5850 6.32 X

126238 6082 T5 MF - DNV 60 6 5850 5.69 X X

201599 6082 T5 MF - DNV 60 6 6000 5.83 X

275372 6005A T5 MF 80 4 6000 5.20 X

126240 6082 T5 MF - DNV 80 6 5850 7.58 X X

275371 6082 T5 MF 80 6 6000 7.80 X

303035 6082 T5 MF - DNV 80 6 6000 7.80 X

126241 6082 T5 MF - DNV 80 8 5850 10.11 X X

275535 6082 T5 MF 80 8 6000 10.40 X

201598 6082 T5 MF - DNV 80 8 6000 10.37 X

126242 6082 T5 MF - DNV 80 10 5850 12.64 X

277010 6082 T5 MF 100 6 6000 9.76 X

126243 6082 T5 MF - DNV 100 6 6000 9.75 X X

275373 6082 T5 MF 100 8 6000 13.01 X

201765 6082 T6 MF - DNV 100 8 6000 12.95 X

123143 6082 T5 MF - DNV 100 10 5850 15.80 X

303021 6082 T5 MF - DNV 100 10 6000 16.20 X

126244 6082 T5 MF - DNV 127 9.53 4000 13.08 X

126245 6082 T5 MF - DNV 127 12.7 4000 17.50 X

218416 6005A T5 MF 150 10 2500 10.13 X

137096 6005A T5 MF 150 10 2850 11.55 X X X

126246 6082 T5 MF - DNV 160 10 4000 17.33 X

126247 6082 T5 MF - DNV 160 12 4000 20.80 X X

126258 6082 T6 MF - DNV 200 8 5850 25.26 X

EX

TR

US

ION

S



Bulb Flat Bar

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

188503 6082 T5 MF - DNV 50 4.5 6000 4.57 X

126253 6082 T5 MF - DNV 50 6 5850 5.18 X X

126250 6082 T5 MF - DNV 75 5.5 5850 8.32 X X

172083 6082 T5 MF - DNV 75 5.5 6000 8.53 X

126254 6082 T5 MF - DNV 80 6 5850 7.96 X

126251 6082 T5 MF - DNV 100 6 5850 10.11 X

172084 6082 T5 MF - DNV 100 6 6000 10.37 X

234689 6082 T5 MF - DNV 150 6 6000 16.66 X

EX

TR

US

ION

S

Solid Square Bar

Material Code


Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

205895 6060 T5 MF 6 4000 0.39 X

131689 6060 T5 MF 10 4000 1.08 X

127284 6060 T5 MF 12 4000 1.56 X X

131690 6060 T5 MF 16 4000 2.77 X

127287 6063 T5 MF 20 4000 4.33 X

127288 6060 T5 MF 25 4000 6.77 X

127289 6060 T5 MF 40 4000 17.02 X

172227 6082 T6 MF - DNV 50 4000 27.10 X



EX

TR

US

ION

S

Angle

Material Code

Alloy Temper FinishHeight(mm)

Width(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

123016 6060 T5 MF 12 12 1.6 6500 0.63 X X X

137199 6060 T5 MF 16 16 1.6 6500 0.85 X X X

123019 6060 T5 MF 20 20 1.6 6000 0.99 X

123017 6060 T5 MF 20 12 1.6 6500 0.85 X X X X

100067 6060 T5 MF 20 20 1.6 6500 1.07 X X X X X

100068 6060 T5 MF 20 20 3 6000 1.80 X

123018 6060 T5 MF 20 20 3 6500 1.95 X X X X

124913 6060 T5 MF 25 12 1.5 6500 0.93 X

100069 6060 T5 MF 25 12 1.6 6500 0.98 X

124915 6060 T5 MF 25 12 3 6500 1.79 X X

124917 6060 T5 MF 25 20 1.6 6500 1.21 X X X

124918 6060 T5 MF 25 20 3 6000 2.04 X X

138563 6060 T5 MF 25 20 3 6500 2.21 X

100070 6060 T5 MF 25 25 1.6 6500 1.35 X X X X X X

124919 6060 T5 MF 25 25 3 5500 2.10 X

110444 6060 T5 MF 25 25 3 6000 2.29 X X X

104562 6060 T5 MF 25 25 3 6500 2.47 X X X X

123121 6060 T5 MF 25 25 6 6500 4.63 X X

100071 6060 T5 MF 32 20 1.6 6500 1.40 X X X X

124923 6060 T5 MF 32 25 3 6500 2.84 X

123122 6060 T5 MF 32 32 1.6 6500 1.76 X

135914 6060 T5 MF 32 32 3 6000 2.98 X

100072 6060 T5 MF 32 32 3 6500 3.22 X X X X X

124926 6060 T5 MF 35 35 2 6000 2.21 X

124931 6060 T5 MF 40 20 1.6 6500 1.63 X X X

137203 6060 T5 MF 40 20 3 6500 3.00 X X

124932 6060 T5 MF 40 25 1.6 6500 1.78 X X X X

124933 6060 T5 MF 40 25 3 6000 3.01 X

124934 6060 T5 MF 40 25 3 6500 3.26 X X X X

124935 6060 T5 MF 40 40 1.5 6500 2.07 X

263035 6060 T5 SM 40 40 1.5 6500 2.07 X



Angle - Continued

EX

TR

US

ION

S

Material Code


Width(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

100073 6060 T5 MF 40 40 1.6 6500 2.20 X X X X X

100074 6060 T5 MF 40 40 3 6000 3.74 X

135587 6060 T5 MF 40 40 3 6500 4.06 X X X X X

137204 6060 T5 MF 40 40 4 6000 4.94 X X

110445 6060 T5 MF 40 40 4 6500 5.33 X X

153158 6060 T5 MF 40 40 6 6000 7.19 X

100075 6060 T5 MF 40 40 6 6500 7.79 X X X X X

124940 6060 T5 MF 50 25 1.6 6500 2.06 X X X X

123124 6060 T5 MF 50 25 3 6000 3.50 X

110446 6060 T5 MF 50 25 3 6500 3.80 X X X X X

124941 6060 T5 MF 50 50 1.5 6500 2.60 X

123126 6060 T5 MF 50 50 1.6 6500 2.76 X X X X

124942 6060 T5 MF 50 50 3 6000 4.72 X X

100076 6060 T5 MF 50 50 3 6500 5.11 X X X X X

155846 6060 T5 MF 50 50 4 5850 6.07 X

110447 6060 T5 MF 50 50 6 6500 9.90 X X X X X

264441 6060 T5 MF 60 60 3 6500 6.18 X

223502 6063 T5 MF 60 60 6 6500 12.05 X X

250591 6060 T5 MF 63 63 4.5 5000 7.41 X

137205 6060 T5 MF 70 25 1.6 6500 2.61 X

124945 6060 T5 MF 70 40 1.5 6500 3.04 X

294754 6060 T5 SM 70 40 1.5 6500 3.04 X

131594 6060 T5 MF 70 40 1.6 6500 3.04 X

294011 6060 T5 MF 75 25 3 6500 5.12 X

272716 6063 T5 MF 75 75 3 6500 7.77 X

110448 6060 T5 MF 76 55 5 6500 10.97 X X X

224118 6060 T5 MF 80 20 3 6500 5.12 X X X

266179 6060 T5 MF 80 40 6 6000 11.12 X

221489 6060 T5 MF 80 40 6 6500 12.05 X X X

136313 6060 T5 MF 80 80 6 6500 16.28 X X

268318 6005 T5 MF 80 80 10 6000 24.43 X X

124980 6106 T6 MF 90 70 6 6000 14.96 X

124949 6060 T5 MF 100 50 3 6500 7.77 X X X

228439 6063 T5 MF 100 100 8 6500 27.05 X X

124954 6060 T5 MF 125 50 3 6500 9.06 X X



Structural Angle

EX

TR

US

ION

S

Material Code


Width(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

124966 6082 T5 MF - DNV 40 40 4 5850 4.80 X

124967 6082 T5 MF - DNV 40 40 4 6000 4.93 X

124968 6082 T5 MF - DNV 40 40 6 6000 7.25 X X

124969 6082 T5 MF - DNV 50 50 4 5850 6.08 X

286010 6082 T5 MF - DNV 50 50 4 6000 6.24 X

110652 6351 T5 MF - DNV 50 50 4 6500 6.90 X

122309 6082 T5 MF - DNV 50 50 6 5850 8.91 X X

124970 6082 T5 MF - DNV 50 50 6 6000 9.14 X

294701 6005 T5 MF 50.8 50.8 6.35 6500 10.80 X

124971 6082 T5 MF - DNV 63 63 6.35 5500 11.56 X X

124973 6082 T5 MF - DNV 76 76 6.35 6000 15.27 X X X

294618 6082 T5 MF 76 76 9.53 5500 20.48 X

124960 6061 T6 MF 76 76 9.53 6000 22.24 X X

124965 6082 T5 MF - DNV 76 76 9.53 6000 22.24 X

124972 6082 T5 MF - DNV 76.2 50.8 6.3 6000 12.62 X X

266781 6061 T6 MF 76.2 50.8 6.35 5500 11.57 X

266780 6061 T6 MF 76.2 76.2 6.35 5500 13.97 X

124961 6061 T6 MF 80 80 6 6000 15.02 X X X

124974 6082 T5 MF - DNV 100 50 6 6000 14.09 X X X X X

220336 6082 T5 MF 100 80 10 6500 29.95 X

274555 6005A T5 MF 100 100 6 6000 18.92 X X

124975 6082 T5 MF - DNV 101 101 9.53 5500 27.39 X X X

266782 6005 T6 MF 101.6 50.8 6.35 5500 13.95 X

294820 6082 T5 MF - DNV 125 50 6 6000 16.46 X

124976 6082 T5 MF - DNV 125 80 8 6000 25.66 X

220165 6082 T5 MF 150 80 10 6500 38.75 X



Round Tube

EX

TR

US

ION

S

Material Code

Alloy Temper FinishDiameter

(mm)Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126754 6060 T5 MF 9.52 1.27 5000 0.45 X110488 6060 T5 MF 12 1.6 6000 0.85 X X175124 6060 T5 MF 12 1.6 6500 0.92 X X110489 6063 T5 MF 15.88 1.22 2450 0.37 X X239654 6063 T6 MF 15.88 1.22 6500 0.99 X294767 6060 T5 MF 15.88 1.6 1190 0.23 X294766 6060 T5 MF 15.88 1.6 6500 1.27 X206593 6063 T6 MF 16 1.2 6100 0.93 X X126761 6060 T5 MF 16 1.2 6500 0.97 X292574 6063 T5 MF 16 1.22 6000 0.92 X126763 6060 T5 MF 16 1.6 5500 1.07 X190292 6063 T5 MF 16 1.6 6100 1.20 X X110493 6060 T5 MF 16 1.6 6500 1.27 X X X X294764 6060 T5 MF 19 1.2 1190 0.22 X123175 6060 T5 MF 19 1.2 6100 1.10 X X X X

302320 6060 T52 MF 19 1.2 6500 1.183 X294660 6060 T591 MF 19 1.6 7300 1.73 X126707 6060 T5 MF 19 3.2 6000 2.58 X X279665 6060 T595 MF 19.04 2.4 6300 2.13 X264263 6063 T5 MF 20 1.6 4750 1.19 X264262 6063 T5 MF 20 1.6 5470 1.37 X123177 6060 T5 MF 20 1.6 6000 1.49 X264261 6063 T5 MF 20 1.6 6300 1.58 X110495 6060 T5 MF 20 1.6 6500 1.61 X X X X X186834 6060 T5 MF 20 3 6500 2.82 X X X300283 6060 T52 MF 25 1.6 6000 1.91 X110496 6060 T5 MF 25 1.6 6500 2.07 X X X X X126718 6060 T591 MF 25 2 6000 2.34 X126779 6060 T5 MF 25 3 5500 3.08 X104574 6060 T595 MF 25 3 6000 3.35 X X X126782 6060 T52 MF 25 3 6000 3.35 X155664 6060 T595 MF 25 3 6500 3.63 X184999 6060 T5 MF 25 3 6500 3.63 X



Round Tube - Continued

EX

TR

US

ION

S

Material Code


(mm)Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

137591 6060 T5 MF 25.4 1.22 6000 1.50 X126783 6060 T5 MF 32 1.6 5500 2.27 X155665 6060 T5 MF 32 1.6 6500 2.68 X X X X279664 6060 T595 MF 32 2 6500 3.31 X126708 6060 T5 MF 32 3 5850 4.31 X100107 6060 T591 MF 32 3 6000 4.42 X303034 6060 T52 MF 32 3 6000 4.42 X104575 6060 T591 MF 32 3 6500 4.79 X X X172192 6060 T5 MF 32 3 6500 4.80 X X X110498 6060 T591 MF 38 3.25 6500 6.25 X X X126709 6060 T5 MF 38 4.5 5500 7.04 X X126790 6060 T5 MF 38.09 2.03 6000 3.74 X259070 6060 T591 MF 38.1 3.25 5000 4.83 X X100108 6060 T591 MF 38.1 3.25 6000 5.79 X303026 6060 T52 MF 38.1 3.25 6000 5.79 X126791 6060 T5 MF 40 1.6 5500 2.88 X126792 6060 T5 MF 40 1.6 6000 3.14 X X242320 6060 T5 MF 40 1.6 6500 3.40 X X X161182 6060 T5 MF 40 3 5850 5.51 X126723 6060 T591 MF 40 3 6500 6.12 X X X X145991 6060 T5 MF 40 3 6500 6.11 X281022 6063 T5 MF 41.6 3.7 6500 7.76 X110499 6060 T591 MF 44 3.25 6000 6.82 X X126712 6060 T5 MF 44.45 3.25 5500 6.25 X292575 6060 T5 MF 44.5 3.2 6500 7.29 X126797 6060 T5 MF 46 3.5 6000 7.57 X126748 6060 T5 AC 46.99 1.09 6000 2.55 X126680 6060 T1 MF 48 4 6500 9.71 X126713 6060 T5 MF 48 4.47 5500 9.16 X301754 6060 T52 MF 48.3 3.25 5500 6.83 X126831 6061 T6 MF 48.4 4.47 6000 10.03 X X X167799 6060 T5 MF 50 1.6 6500 4.28 X X110502 6060 T591 MF 50 2 6500 5.30 X X126681 6060 T1 MF 50 3 6000 7.19 X X126716 6060 T5 MF 50 3 6000 7.19 X123182 6060 T5 MF 50 3 6000 7.19 X X123181 6060 T1 MF 50 3 6500 7.77 X

104576 6060 T591 MF 50 3 6500 7.79 X X X155666 6060 T5 MF 50 3 6500 7.79 X126717 6060 T5 MF 50 4 5850 9.13 X X144633 6106 T6 MF 50 4 6000 9.40 X123183 6060 T1 MF 50 4 6500 10.15 X110664 6060 T591 MF 50 4 6500 10.15 X126741 6060 T5 AC 50.8 1.63 6000 4.08 X110503 6060 T591 MF 60 2 6500 6.39 X X137595 6060 T5 MF 60 2 6500 6.39 X



Round Tube - Continued

Round Tube - Fluted

EX

TR

US

ION

S

Material Code


(mm)Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126683 6060 T1 MF 60 3 6000 8.72 X110505 6060 T591 MF 60 3 6500 9.45 X X221266 6060 T5 MF 60 3 6500 9.45 X X126728 6060 T591 MF 60 5 6500 15.17 X X126684 6060 T1 MF 60 6 6500 17.93 X X239686 6060 T1 MF 63.5 3.95 7000 14.02 X126685 6060 T1 MF 63.5 4.75 6000 14.23 X206614 6005 T5 MF 63.5 6.35 6500 20.07 X X239687 6060 T1 MF 73.03 5.16 7000 20.88 X126690 6060 T1 MF 75.5 4 6500 16.82 X X126805 6060 T5 MF 76 1.6 6000 6.06 X126691 6060 T1 MF 76 6 6500 23.24 X X

279666 6060 T5 MF 76.19 2.03 6500 8.30 X126806 6060 T5 MF 76.2 2.65 5500 9.09 X256594 6063 T4 MF 76.2 3.2 6400 12.73 X188642 6060 T1 MF 76.2 4.7 6500 18.50 X100110 6060 T1 MF 76.2 4.75 6000 17.32 X126731 6060 T591 MF 76.2 4.75 6500 18.77 X206611 6005 T5 MF 76.2 6.35 6000 22.57 X126807 6060 T5 MF 80 3 6000 11.76 X126808 6060 T5 MF 80 3 6500 12.74 X X X X226715 6060 T5 MF 100 2 6500 10.49 X X126809 6060 T5 MF 100 3 6500 16.04 X X X X126693 6060 T1 MF 100 4 6500 21.17 X126694 6060 T1 MF 100 6 6500 31.10 X126811 6060 T5 MF 101.6 1.8 6000 9.14 X

126902 6106 T6 MF 101.6 3.25 6000 16.31 X126812 6060 T5 MF 127 1.6 6000 10.21 X126903 6106 T6 MF 127 3.2 6000 20.17 X126904 6106 T6 MF 127 4.3 6100 27.31 X284981 6106 T6 MF 152.4 4.7 6000 35.69 X126843 6063 T5 MF 203.2 3 6100 31.07 X X

Material Code


(mm)Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126720 6060 T591 MF 30.5 1.6 6500 2.99 X

147332 6063 T591 MF 32 3 6500 4.40 X X



EX

TR

US

ION

S

Structural Round Tube

Material Code


(mm)Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

206590 6106 T6 MF 16 1.2 1195 0.18 X266744 6005A T5 MF 38 4.5 6500 8.34 X286653 6005A T5 MF 38.00 4.50 6600 8.47 X218320 6061 T6 MF 39.3 4.47 6500 10.83 X126897 6106 T6 MF 46 3.5 6000 7.57 X126866 6082 T5 MF - DNV 48.4 4.47 5850 9.75 X187774 6005A T5 MF 48.4 4.47 6000 10.03 X275366 6082 T5 MF 50 3 6000 7.19 X126868 6082 T5 MF - DNV 50 4 5850 9.13 X X190290 6005A T5 MF 50.00 4.00 6600 10.34 X137598 6106 T6 MF 50 5 6000 11.50 X X126869 6082 T5 MF - DNV 50 6 6000 13.43 X X190289 6005A T5 MF 50 6 6600 14.89 X303027 6082 T5 MF - DNV 50 6.35 6000 18.34 X126871 6082 T5 MF - DNV 63.5 6.35 5850 17.88 X X X126837 6061 T6 MF 63.5 6.35 6000 18.52 X X X126872 6082 T5 MF - DNV 63.5 12 6000 18.34 X172213 6082 T5 MF - DNV 73 5.16 5850 17.38 X126873 6082 T5 MF - DNV 76.2 6.35 6000 22.57 X X285664 6082 T6 MF - DNV 76.2 6.35 6000 22.57 X126874 6082 T5 MF - DNV 80 3 6000 11.76 X126875 6082 T5 MF - DNV 80 6 5850 22.08 X126885 6082 T6 MF - DNV 88.9 5.35 6000 22.66 X126876 6082 T5 MF - DNV 88.9 6.30 6000 26.48 X X126862 6082 T5 MF - DNV 100 6 5850 28.09 X126877 6082 T5 MF - DNV 100 10 6000 45.80 X X172216 6082 T6 MF - DNV 101 3.25 6000 16.31 X126878 6082 T5 MF - DNV 101.6 6.35 6000 30.78 X X X285665 6082 T6 MF - DNV 101.6 6.35 6000 30.78 X126879 6082 T5 MF - DNV 114.3 6.35 6000 34.88 X X126880 6082 T5 MF - DNV 127 19.05 4000 69.75 X X126905 6106 T6 MF 152 2.03 6000 15.49 X126886 6082 T6 MF - DNV 152.4 6 4000 98.18 X X184982 6082 T6 MF - DNV 160 6 6000 76.39 X126887 6082 T6 MF - DNV 160 10 5850 74.42 X X184984 6082 T6 MF - DNV 162 6 6000 47.63 X303032 6082 T6 MF - DNV 177.8 12.7 6000 64.03 X302976 6082 T5 MF - DNV 200 10 4000 76.54 X172217 6082 T6 MF - DNV 203 3 6000 30.56 X X126881 6082 T5 MF - DNV 205.6 12.7 4000 83.12 X172218 6082 T6 MF - DNV 219 8.2 5850 85.77 X172219 6082 T6 MF - DNV 219 12.7 6000 136.26 X256301 6082 T6 MF - DNV 254 12 6000 147.73 X



Solid Round Bar

EX

TR

US

ION

S

Material Code


(mm)Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

192430 6063 T5 MF 8 6500 0.88 X

123155 6060 T5 MF 10 4000 0.85 X X X X X X

110470 6060 T5 MF 12 4000 1.22 X X X X X X

126592 6082 T5 MF 16 4000 2.18 X

104565 6060 T5 MF 16 4000 2.18 X X X X X

110471 6060 T5 MF 20 4000 3.40 X X X X X X

137102 6060 T5 MF 25 4000 5.48 X X X X

100090 6060 T5 MF 25.4 4000 1.37 X X X

126582 6005A T5 MF 33 6000 13.85 X X

126593 6082 T5 MF 39.6 4000 3.33 X X

123157 6061 T5 MF 50 4000 21.20 X X

157744 6005A T5 MF 50 4000 5.30 X X

126585 6061 T6 MF 50 4000 21.20 X

123158 6082 T5 MF 65 3000 8.96 X

126587 6005A T5 MF 75 3000 11.93 X

126588 6005A T5 MF 80 4000 54.28 X X

126594 6082 T5 MF - DNV 90 3000 51.53 X

126598 6082 T6 MF - DNV 100 3000 63.62 X

126599 6082 T6 MF - DNV 127 3000 102.61 X

126597 6082 T6 MF - DNV 152.4 2000 97.05 X

205036 6082 T6 MF 228.6 3000 307.26 X

257713 5083 H111 MF 355.6 3000 477.95 X



Channel

Channel Structural Channel

EX

TR

US

ION

S

1

T2

Material Code

Alloy Temper FinishBase(mm)

Height(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126061 6060 T5 MF 10 10 1.6 4800 0.56 X

174970 6060 T5 MF 10 10 1.6 6500 0.75 X

275374 6063 T5 MF 10 10 1.6 6500 0.75 X

224985 6060 T5 MF 12 10 1.6 6500 0.86 X

123128 6060 T5 MF 12 12 1.6 6500 0.91 X

123129 6060 T5 MF 16 16 1.6 6500 1.25 X X X

221484 6060 T5 MF 16 16 3 6500 2.21 X

126063 6060 T5 MF 20 16 1.6 6000 1.27 X X X

126064 6060 T5 MF 20 20 1.6 6500 1.60 X X X

126065 6060 T5 MF 20 20 3 6500 2.85 X X X

126069 6060 T5 MF 25 25 1.6 6500 2.02 X

110451 6060 T5 MF 25 25 3 6000 3.35 X X

126070 6060 T5 MF 25 25 3 6500 3.65 X X X X

137358 6060 T5 MF 25 40 3 6500 5.21 X

126073 6060 T5 MF 32 25 3 6500 4.01 X X X

110789 6060 T5 MF 40 20 3 6500 3.91 X X X

126076 6060 T5 MF 40 25 3 6000 4.08 X

126077 6060 T5 MF 40 25 3 6500 4.43 X X X X

126078 6060 T5 MF 40 40 3 6500 6.00 X X X

126079 6060 T5 MF 44 25 3.2 6500 4.98 X

126081 6060 T5 MF 50 25 3 6500 4.95 X X X X X X

194646 6060 T5 MF 50 50 3 6500 7.58 X X

126084 6060 T5 MF 60 32 3 6500 6.23 X X

295526 6005 T5 MF 76 38 6.35 7500 20.55 X

123130 6060 T5 MF 80 25 3 6000 6.02 X

266029 6060 T5 MF 80 25 3 6500 6.55 X

126088 6060 T5 MF 80 40 4 6500 10.71 X X X

126089 6060 T5 MF 80 40 6 6000 14.50 X

203970 6060 T5 MF 100 25 3 6500 7.61 X

126091 6060 T5 MF 100 50 3 6500 10.21 X X X



Channel - Continued

Structural Channel

Material Code

Alloy /Temper

FinishBase(mm)

Height(mm)

Thick (mm) Length(mm)

Kg/Length

Stocked

T1 T2

NS

W

QL

D

SC

VIC SA

WA

126051 6005A T5 MF 57 32 4.5 4.5 6100 8.49 X

126103 6082 T5 MF 76 38 4 4 7400 11.46 X

206410 6005 T5 MF 76 38 7.92 6.35 6500 17.81 X

126104 6082 T5 MF - DNV 76 38.1 7.9 7.9 5500 15.07 X X X X

126105 6082 T5 MF - DNV 80 40 4 4 6000 9.89 X

123131 6082 T5 MF - DNV 80 40 6 6 6000 14.50 X X X X

110453 6061 T6 MF 80 40 6 8 6000 16.83 X X

126107 6082 T5 MF - DNV 100 50 5 5 4950 12.85 X X

303453 6082 T5 MF - DNV 100 50 5 5 6000 15.57 X

110450 6082 T5 MF 100 50 5 5 7500 19.46 X X X

220166 6082 T6 MF 100 50 6 9 7000 26.70 X X

266783 6005A T5 MF 101.6 50.8 6.3 7.9 5500 20.58 X X

123133 6082 T5 MF - DNV 102 51 7.9 6.3 6000 22.50 X X

204624 6005A T5 MF 102 51 7.9 6.3 7500 28.13 X X

126108 6082 T5 MF 102 51 7.9 6.3 7500 28.13 X X

239755 6082 T6 MF - DNV 127 50.8 4 4 6000 14.65 X X

294619 6005A T5 MF 127 64 9.53 6.35 5500 28.98 X

126111 6082 T5 MF - DNV 152 64 7.9 6.4 6000 31.22 X X X

126112 6082 T5 MF 152 64 7.9 6.3 8840 46.00 X X X

266784 6061 T6 MF 152.4 64 6.8 6.8 5500 28.55 X

144597 6082 T5 MF 178 76 11.1 6.3 5200 38.66 X X

262898 6082 T6 MF - DNV 200 90 10 8 7000 60.76 X

126056 6005A T5 MF 250 110 12 12 3000 42.25 X

EX

TR

US

ION

S

Material Code

Alloy Temper FinishBase(mm)

Height(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

267498 6082 T5 MF 101.6 50.8 6.3 6000 22.50 X

275250 6082 T5 MF 127 63.5 9.35 6500 34.13 X

268382 6005 T5 MF 127 63.5 9.53 6000 31.61 X

222299 6060 T5 MF 127 63.5 9.53 6000 31.50 X

126116 6106 T6 MF 127 64 9.5 6000 31.60 X X

172076 6106 T6 MF 150 75 6 5000 23.75 X

277692 6005 T5 MF 152 64 6.4 6000 31.22 X

126101 6063 T6 MF 180 80 6 2290 16.84 X

172075 6061 T6 MF 250 110 12 2450 34.50 X



EX

TR

US

ION

S

Rectangular Box - Square Edge

Material Code


Width(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

144623 6063 T5 MF 38 16 1.6 6500 2.87 X145988 6060 T5 MF 38.1 17.5 3.18 6500 5.49 X123159 6060 T5 MF 38.1 25.4 2.54 6500 5.46 X X126613 6060 T5 MF 40 25 2.5 6500 5.29 X X X

266840 6063 T6 MF 40 25 2.5 7000 5.70 X261333 6063 T5 MF 50 10 1.6 6500 3.21 X212258 6060 T5 MF 50 25 1.6 6000 3.74 X126615 6060 T5 MF 50 25 1.6 6500 4.05 X X X126616 6060 T5 MF 50 25 2.5 6500 6.14 X100091 6060 T5 MF 50 25 3 6000 6.73 X X104566 6060 T5 MF 50 25 3 6500 7.29 X X X X110475 6060 T5 MF 50 40 3 6500 8.87 X126618 6060 T5 MF 60 40 3 6000 9.16 X123160 6060 T5 MF 60 40 3 6500 9.93 X X X X X265578 6060 T5 MF 75 50 3 6000 11.57 X104567 6060 T5 MF 75 50 3 6500 12.53 X X X X123161 6060 T5 MF 76 25 2.36 6500 8.05 X X X X

297660 6063 T5 MF 76.2 25.4 1.6 6500 5.54 X250152 6060 T5 MF 76.2 38.1 3.2 6500 11.33 X126621 6060 T5 MF 80 25 3 6500 10.45 X X110478 6060 T5 MF 80 40 3 6500 12.05 X X X X X X242703 6060 T5 MF 80 40 3 7000 12.97 X126623 6060 T5 MF 80 50 3 6500 13.10 X X X X126624 6060 T5 MF 100 25 2.5 6000 9.72 X126625 6060 T5 MF 100 25 2.5 6500 10.53 X X X X X126627 6060 T5 MF 100 50 1.6 6500 8.24 X294677 6106 T6 MF 100 50 1.6 6500 8.28 X216817 6063 T5 MF 100 50 2 6500 10.29 X126626 6060 T5 MF 100 50 3 6100 14.23 X X110472 6060 T5 MF 100 50 3 6500 15.16 X X X X X281960 6063 T5 MF 125 25 3 6500 15.22 X187062 6005A T5 MF 125 50 3 6500 17.85 X110663 6060 T5 MF 150 50 3 6500 20.42 X X X X X X126629 6060 T5 MF 152 38 3.2 6500 20.59 X100092 6060 T5 MF 200 50 3 6500 25.69 X X X X X238398 6106 T6 MF 250 50 3 6000 28.57 X294679 6063 T5 MF 250 50 3 6500 31.07 X



Rectangular Box - Radius Edge

EX

TR

US

ION

S

Material Code


Width(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

225516 6063 T5 MF 38 16 1.2 6500 2.09 X

260383 6063 T5 MF 38 16 1.4 6500 2.43 X X X

110474 6060 T5 MF 38 25 1.5 6100 2.88 X X

144618 6060 T5 MF 38 25 1.5 6500 3.06 X X X

269478 6063 T5 MF 38 25 1.5 7300 3.45 X

131156 6060 T5 MF 38 25 1.6 6500 3.35 X

267738 6063 T6 MF 38 25 1.6 7500 3.54 X

222610 6060 T5 MF 38 25 2 6500 4.17 X

267199 6063 T6 MF 38 25 2 7200 4.49 X

225515 6063 T5 MF 38 25 3.2 6000 5.83 X X

280162 6060 T5 MF 38.1 25.4 1.6 7300 3.78 X

166658 6005A T5 MF 40 20 2 7000 4.19 X

126640 6060 T5 MF 40 25 3 6500 6.09 X X

267235 6063 T5 MF 50 25 1.6 6500 3.93 X X

186831 6063 T5 MF 50 25 2 6500 4.88 X X

126605 6060 T52 MF 50 25 3 4800 5.27 X

126604 6060 T5 MF 50 25 3 6000 6.58 X X X

299369 6060 T5 MF 50 25 3 6500 7.29 X

214733 6063 T5 MF 50 32 1.8 6000 4.48 X

280272 6005A T5 MF 50 40 5 8000 17.34 X

144624 6063 T5 MF 60 40 2.1 6500 6.96 X X

110477 6060 T5 MF 65 16 1.2 6500 3.24 X

157979 6060 T5 MF 65 16 1.4 6500 3.76 X X X X

226613 6063 T5 MF 70 30 2 6500 6.64 X

184505 6063 T5 MF 70 30 3 6500 9.91 X X

216816 6063 T5 MF 75 50 3 6500 12.17 X X

209136 6063 T5 MF 80 40 3 6500 11.92 X

184502 6063 T5 MF 80 50 3 6500 12.70 X

225514 6063 T5 MF 100 16 1.4 6500 5.81 X X

160381 6060 T5 MF 100 50 3 6500 14.81 X X X

264419 6005A T5 MF 100 50 6 6500 28.26 X

144620 6060 T5 MF 100 50 6 6500 28.16 X

275256 6063 T5 MF 101.6 76.2 2.3 6500 13.74 X X

238802 6351 T5 MF 125 50 6 2485 12.58 X

256696 6063 T5 MF 150 50 3 6500 20.10 X X X

273710 6351 T5 MF 160 106 6 6000 49.00 X



Structural Rectangular Box - Radius Edge

EX

TR

US

ION

S

Material Code


Width(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126650 6082 T5 MF - DNV 50 25 3 5850 6.56 X

303030 6082 T5 MF - DNV 50 25 3 6000 6.73 X

126651 6082 T5 MF - DNV 50 40 3 6500 8.87 X

126654 6082 T5 MF - DNV 100 50 3 5850 13.64 X

303020 6082 T5 MF - DNV 100 50 3 6000 13.99 X

212257 6082 T5 MF 100 50 6 2480 10.74 X

144625 6082 T5 MF 100 50 6 5500 23.83 X X

144626 6082 T5 MF - DNV 100 50 6 6500 28.16 X

126655 6082 T5 MF - DNV 101 63 4 6500 22.01 X

239472 6082 T5 MF 101.6 76.2 2.3 11800 24.93 X

220163 6082 T5 MF 101.6 76.2 2.3 12000 25.36 X

223244 6082 T6 MF 152 76 6 6500 45.18 X X

256025 6082 T5 MF 152 76 6 12000 83.40 X

126653 6082 T5 MF - DNV 152 76 6.4 5850 43.35 X X

134786 6082 T5 MF - DNV 200 50 3 5850 23.13 X X



Square Box - Square Edge

EX

TR

US

ION

S

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

127300 6060 T5 MF 20 1.2 5500 1.34 X

127301 6060 T5 MF 20 1.6 6500 2.06 X

127302 6060 T5 MF 20 3 6000 3.31 X

127303 6060 T5 MF 20 3 6500 3.58 X X

100103 6060 T5 MF 25 1.6 6000 2.43 X

127305 6060 T5 MF 25 1.6 6500 2.63 X X X

104570 6060 T5 MF 25 3 6500 4.65 X X X X

144637 6060 T5 MF 25.4 1.2 6000 1.89 X X

104571 6060 T5 MF 32 2 6500 4.23 X X

110481 6060 T5 MF 32 3 6500 6.12 X X X X X

127310 6060 T5 MF 40 1.6 6500 4.33 X X X X X

110482 6060 T5 MF 40 2 6500 5.36 X X

145997 6060 T5 MF 40 2.5 6500 6.60 X

127312 6060 T5 MF 40 3 6100 7.33 X

110483 6060 T5 MF 40 3 6500 7.80 X X X X

272469 6060 T5 MF 45 2.5 6500 7.46 X

137887 6060 T5 MF 50 1.6 6500 5.43 X

127356 6063 T6 MF 50 1.6 6500 5.45 X

127313 6060 T5 MF 50 2.5 6500 8.34 X X X X X

104572 6060 T5 MF 50 3 6500 9.93 X X X X

137889 6060 T5 MF 65 2.5 6500 11.01 X

265259 6063 T5 MF 75 3 6500 15.22 X

127318 6060 T5 MF 100 3 6500 20.42 X X X



Square Box - Radius Edge

EX

TR

US

ION

S

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

223503 6063 T5 MF 16 1.8 6500 1.72 X X

110306 6060 T5 MF 19.05 1.57 6500 1.90 X

127322 6060 T5 MF 20 1.6 6500 2.06 X

110307 6060 T591 MF 20 3 6500 3.59 X X

127326 6060 T5 MF 20 3 7500 3.97 X

110308 6060 T5 MF 25 1.5 6500 2.48 X X

127327 6060 T5 MF 25 2 6500 3.23 X X

127294 6060 T52 MF 25 3 6100 4.22 X

110480 6060 T591 MF 25 3 6500 4.63 X X

123169 6060 T5 MF 25 3 7000 4.99 X

127335 6060 T5 MF 25 3 7500 5.35 X

281434 6060 T5 MF 25.4 3.25 6100 4.76 X

280163 6060 T5 MF 30 1.6 7300 3.05 X

281961 6060 T5 MF 32 3 6500 6.03 X X

186830 6060 T5 MF 40 2 6500 5.23 X X

278039 6060 T5 MF 40 3 6500 7.64 X

160600 6063 T5 MF 40 3 6500 7.80 X X X

292576 6060 T5 MF 50 1.6 6000 4.78 X

127360 6063 T6 MF 50 1.6 6600 5.29 X X

127370 6106 T6 MF 50 1.6 7200 5.77 X

144642 6060 T6 MF 50 2 6500 6.46 X X

127337 6060 T5 MF 50 2.03 6100 6.42 X

186832 6063 T5 MF 50 3 6500 9.53 X X

185950 6063 T6 MF 50 5 6500 15.33 X X X

110485 6060 T5 MF 50.8 2 6500 6.62 X X

110486 6060 T5 MF 50.8 3.2 6500 10.48 X X X X

127342 6060 T5 MF 65 3 6500 13.10 X X X X

206615 6005 T5 MF 76 6.2 6500 28.02 X

186829 6060 T5 MF 76.2 3 6500 15.04 X

127344 6060 T5 MF 80 2.5 6500 13.64 X X

275300 6063 T5 MF 80 3 6500 15.99 X

207978 6063 T5 MF 100 3.2 6000 19.72 X



Structural Square Box - Radius Edge

EX

TR

US

ION

S

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

175165 6005A T5 MF 20 2.8 7000 3.56 X

263100 6005A T5 MF 32 2.5 6000 4.88 X

291904 6005A T5 MF 40 4 6500 10.04 X

127364 6082 T5 MF - DNV 50.8 3.2 5850 9.43 X

303031 6082 T5 MF 50.8 3.2 6000 9.67 X

264438 6106 T6 MF 62 5 6800 20.45 X

275786 6082 T6 MF - DNV 76 3 6200 14.35 X

144635 6005A T5 MF 76 6.35 6500 28.81 X X X

127367 6082 T5 MF - DNV 80 6 6000 29.08 X X

275302 6082 T5 MF 80 6 6000 29.08 X

222806 6082 T5 MF 100 6 6000 35.18 X X

144636 6005A T5 MF 100 6 6500 39.12 X X X

222650 6005A T5 MF 100 6 9000 52.77 X

244020 6106 T6 MF 100 6 10500 61.56 X

127365 6082 T5 MF - DNV 102 6.35 5850 36.57 X X X

288240 6005A T5 MF 106 6 7500 43.97 X

172229 6082 T5 MF - DNV 178 9 5000 81.68 X



T–Bar

EX

TR

US

ION

S

Material Code


Height(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

172230 6060 T5 MF 19 19 1.6 6000 1.00 X

275304 6060 T5 MF 20 20 1.6 6500 1.09 X

127372 6060 T5 MF 25 25 1.6 5500 1.15 X

157884 6060 T5 MF 25 25 1.6 6500 1.36 X X X

127376 6060 T5 MF 38 38 3.18 5500 3.45 X

296938 6060 T5 MF 40 20 1.5 6500 1.53 X

296939 6060 T5 SM 40 20 1.5 6500 1.53 X

124006 6060 T5 MF 40 40 1.6 5500 1.86 X

275303 6060 T5 MF 40 40 1.6 6500 2.21 X

166974 6060 T5 MF 40 40 1.6 6500 2.20 X

296940 6060 T5 SM 40 40 1.6 6500 2.20 X

127381 6060 T5 MF 40 40 3 6500 4.06 X X

127396 6082 T5 MF - DNV 40 40 4 5850 4.91 X X X X X X

127389 6082 T6 MF - DNV 50 35 2 6000 2.75 X

127398 6082 T6 MF - DNV 50 35 3 6000 4.05 X

127390 6082 T6 MF - DNV 50 50 4 5850 6.17 X

172233 6082 T6 MF - DNV 50 50 4 6000 6.33 X

127392 6082 T5 MF - DNV 50 50 6 5850 9.19 X X

127397 6082 T5 MF - DNV 54 31.7 4 6000 5.42 X

127393 6082 T5 MF - DNV 60 50 4 6000 8.47 X

172236 6082 T6 MF - DNV 60 50 4 6000 8.47 X

172234 6082 T6 MF - DNV 60 50 4 10800 15.24 X

172242 6082 T6 MF - DNV 70 50 4 6000 10.61 X

172240 6082 T6 MF - DNV 70 50 4 10800 19.11 X

172246 6082 T6 MF - DNV 100 45 5 6000 13.40 X

200913 6082 T6 MF - DNV 100 45 5 10800 24.12 X

172251 6082 T6 MF - DNV 128 35 5 6000 14.35 X

172254 6082 T6 MF - DNV 128 35 5 9600 22.95 X

172255 6082 T6 MF - DNV 139 80 5 6000 21.67 X



T–Bar - Continued

EX

TR

US

ION

S

Material Code


Height(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

127404 6082 T6 MF - DNV 156 50 6 6000 19.53 X

172263 6082 T6 MF - DNV 156 50 6 9600 31.29 X

172256 6082 T6 MF - DNV 163 80 5 6000 23.60 X

127406 6082 T6 MF - DNV 208 80 6 6000 30.06 X

172269 6082 T6 MF - DNV 308 100 5 6000 37.68 X

172277 6082 T6 MF - DNV 370 120 6 9600 87.76 X

262814 6082 T6 MF - DNV 402 120 6 6000 30.83 X

262820 6082 T6 MF - DNV 402 120 6 10800 110.99 X

I–Beam

Material Code


Height(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126296 6082 T6 MF - DNV 100 75 4.8 6500 25.05 X X

193786 6082 T6 MF - DNV 101 76 5 6000 23.75 X

126295 6082 T6 MF - DNV 130 80 4.8 6500 27.52 X X

172092 6082 T6 MF - DNV 176 80 5 6000 34.01 X

172095 6082 T6 MF - DNV 176 80 5 9600 54.42 X

172096 6082 T6 MF - DNV 216 80 5 6000 38.20 X X

172098 6082 T6 MF - DNV 216 80 5 9600 61.11 X

172099 6082 T6 MF - DNV 220 100 5 6000 48.82 X

172104 6082 T6 MF - DNV 270 100 6 6000 57.05 X X

172108 6082 T6 MF - DNV 316 150 6 6000 68.54 X

172106 6082 T6 MF - DNV 270 100 6 8400 79.87 X

172107 6082 T6 MF - DNV 270 100 6 9600 91.28 X



Miscellaneous Sections

EX

TR

US

ION

S

Material Code

Alloy Temper Finish DescriptionLength(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126367 6060 T5 MF J Mould 4000 0.63 X

126331 6060 T1 MF Table Edge 4000 1.24 X

126333 6060 T1 MF Table Edge 4000 - X

126366 6060 T5 MF Crescent mould 4000 - X

126339 6060 T5 AC Bench Seat 6000 - X

126340 6060 T5 AC Bech Seat 6000 16.62 X

297316 6060 T5 MF Z Section 6000 - X

126397 6106 T6 MF P4000 Uni Strut 6000 - X

280375 6063 T5 MF Stair Tread 6050 17.20 X X

253658 6060 T5 MF Rope Annex Track 6500 1.40 X

135412 - - - Seat end caps - - X

284191 - - - Stair Tread end caps - - X X


39

SH

EE

T &

PL

AT

E

Sheet & Plate



40

Sheet Alloy Table

Alloy Typical applicationHeat

TreatableCorrosion

ResistanceMachining Anodising Forming Welding

5005

Appliances and utensils, general sheet metal work and high-strength foil

No A E, D B A, C A

5052Sheet metal work, appliances, marine applications

No A D, C B A, C A

5251

Sheet metal work, appliances, small boats, hydraulic tube, high-strength foil

No A C, B D A, C A

5252High-strength automobile trim

No A C, B A B, C A

5083

Un red welded pressure vessels,marine, aircraft, cryogenics, TV towers, drilling rigs, transportation equipment, missile components. Should not be used at temperatures above 65°C

No A D, D A, C B, C A

5086 As for 5083 No A D, D A, C A, B A

Alloys used by Capral Aluminium Industrial Solutions are highlightedRelative rating are in decreasing order of merit = ABCDEWhere applicable, ratings for both annealed and hardest temper are given eg : A, CRating indicated suitability of alloy for decorative quality anodising. All Aluminium alloys can be anodised for increased corrosion and wear resistance.


SH

EE

T &

PL

AT

ES

HE

ET

& P

LA

TE


41

Recommended Bending Radii for Sheet & Plate

Note: The radii listed are the minimum recommended for bending sheets and plates without fracturing in a standard press brake with air bend dies. Other types of bending operations may require larger radii or permit smaller radii. The minimum permissible radii will also vary with the design and condition of tooling.

Heat-treatable alloys can be formed over appreciably smaller radii immediately after solution heat treatment. The H112 temper (applicable to non-heat-treatable alloys) is supplied in the as-fabricated condition without special property control, but usually can be formed over radii applicable to the H14 (or H34) temper or smaller. Applicable to 5005 H1X and H3X tempers.


Alloy Temper

radii for various thicknesses expressed in terms of thickness (t)

t = 0.4mm

t = 0.8mm

t = 1.6mm

t = 3.0mm

t = 4.0mm

t = 6.0mm

t = 10.0mm

t = 12.0mm

11001200

-0 0.0t 0.0t 0.0t 0.0t 0.0t 0.5t 1.0t 1.5t-H12 0.0t 0.0t 0.0t 0.5t 1.0t 1.0t 1.5t 2.0t-H14 0.0t 0.0t 0.0t 1.0t 1.0t 1.5t 2.0t 2.5t-H16 0.0t 0.5t 1.0t 1.5t-H18 1.0t 1.0t 2.0t 3.0t

300330055005


50525251


5454

-0 0.0t 0.0t 0.0t 1.0t 1.0t 1.0t 1.5t 1.5t-H32 0.0t 0.5t 1.0t 1.5t 1.5t 2.0t 2.5t 3.5t-H34 0.5t 1.0t 1.5t 2.5t 2.5t 3.0t 3.5t 4.0t-H112 2.0t 2.5t 3.0t

5083

-0 1.0t 1.0t 1.0t 1.5t 1.5t-H116 2.3t 3.0t 3.0t 3.8t 4.5t-H311 1.5t 1.5t 1.5t 2.0t 2.5t-H321 2.0t 2.0t 2.0t 2.5t 3.0t-H323 2.0t 2.5t 3.0t-H343 3.0t 3.5t 4.0t

6061-0 0.0t 0.0t 0.5t 1.0t 1.0t 1.0t 1.5t 2.0t-T4 0.0t 0.5t 1.0t 1.5t 2.5t 3.0t 3.5t 4.0t-T6 1.0t 1.0t 1.5t 2.5t 3.0t 4.0t 4.5t 5.0t

SH

EE

T &

PL

AT

E

Recommended Minimum Inside Bending Radii for 90 degree Cold Forming of Sheet & Plate (Bending transverse to rolling direction )



Sheet & Plate - 5005

Material Code

Alloy Temper FinishThick(mm)

Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

100093 5005 H34 MF 0.6 1200 2400 4.67 X X X X126992 5005 H34 MF 0.7 1200 2400 5.44 X127073 5005 H34 MF 0.7 1200 2400 5.44 X100094 5005 H34 MF 0.8 1200 2400 6.22 X X X X X126996 5005 H34 MF 0.9 1200 2400 7.00 X126997 5005 H34 MF 0.9 1200 3000 8.75 X100095 5005 H34 MF 1 900 1800 4.37 X100096 5005 H34 MF 1 1200 2400 7.78 X X X X100097 5005 H34 MF 1.2 1200 2400 9.33 X X X X127006 5005 H34 MF 1.2 1200 3000 11.66 X X X X100098 5005 H34 MF 1.6 900 1800 6.87 X127012 5005 H34 MF 1.6 1200 1800 9.33 X

100099 5005 H34 MF 1.6 1200 2400 12.44 X X X X X127014 5005 H34 MF 1.6 1200 3000 15.55 X X X127015 5005 H34 MF 1.6 1500 3000 19.44 X127016 5005 H34 MF 1.6 1500 3600 23.33 X175637 5005 H34 MF 2 1200 1800 11.71 X100100 5005 H34 MF 2 1200 2400 15.55 X X X X X127020 5005 H34 MF 2 1200 3000 19.44 X X X127021 5005 H34 MF 2 1200 3600 23.33 X X X X178776 5005 H34 MF 2 1500 2400 19.44 X127022 5005 H34 MF 2 1500 3000 24.30 X X127024 5005 H34 MF 2.5 900 1800 10.94 X X X X110019 5005 H34 MF 2.5 1200 2400 19.44 X X X X X221492 5005 H34 MF 2.5 1200 3000 24.30 X X127029 5005 H34 MF 2.5 1500 2400 24.30 X X275305 5005 H34 MF 2.5 1500 3000 30.26 X X X127032 5005 H34 MF 3 900 1800 13.12 X110302 5005 H34 MF 3 1200 1800 17.50 X X X100101 5005 H34 MF 3 1200 2400 23.33 X X X X X X127033 5005 H34 MF 3 1200 3000 29.16 X X X X127034 5005 H34 MF 3 1200 3600 34.99 X X X X127038 5005 H34 MF 3 1500 3000 36.45 X X X X X127039 5005 H34 MF 3 1500 3600 43.74 X X X X

SH

EE

T &

PL

AT

E



Sheet & Plate – 5005 - Continued

Sheet - 5005 PVC Coated

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

127087 5005 H34 MF - PVC 1 1200 2400 7.78 X127040 5005 H34 MF - PVC 1.2 1200 2400 9.33 X X X X127088 5005 H34 MF - PVC 1.2 1200 3000 11.66 X172430 5005 H34 MF - PVC 1.2 1200 3600 14.00 X127048 5005 H34 MF - PVC 1.2 1500 3000 14.58 X127158 5005 H34 MF - PVC 1.5 1200 2143 10.42 X127042 5005 H34 MF - PVC 1.5 1200 2400 11.66 X127044 5005 H34 MF - PVC 1.5 1200 3000 14.58 X127045 5005 H34 MF - PVC 1.5 1200 3600 17.50 X209100 5005 H34 MF - PVC 1.5 1200 3650 17.74 X123162 5005 H34 MF - PVC 1.6 1200 2400 12.44 X X X127047 5005 H34 MF - PVC 1.6 1200 3600 18.66 X127051 5005 H34 MF - PVC 2 1200 1830 11.86 X127052 5005 H34 MF - PVC 2 1200 2400 15.55 X X X X X123164 5005 H34 MF - PVC 2 1200 3000 19.51 X127053 5005 H34 MF - PVC 2 1200 3600 23.33 X268609 5005 H34 MF - PVC 2.5 1200 2400 19.51 X127054 5005 H34 MF - PVC 2.5 1200 2400 19.29 X X X127055 5005 H34 MF - PVC 2.5 1200 3000 24.30 X127056 5005 H34 MF - PVC 2.5 1200 3600 29.16 X260312 5005 H34 MF - PVC 2.5 1500 2400 24.39 X273962 5005 H34 MF - PVC 2.5 1500 3600 36.59 X221933 5005 H34 MF - PVC 3 900 1800 13.12 X215344 5005 H34 MF - PVC 3 1200 2400 23.33 X123824 5005 H34 MF - PVC 3 1200 2400 23.33 X X X X X127059 5005 H34 MF - PVC 3 1200 3000 29.16 X X127060 5005 H34 MF - PVC 3 1200 3600 34.99 X X286080 5005 H34 MF - PVC 3 1500 2400 29.27 X203242 5005 H34 MF - PVC 3 1500 3000 36.59 X214735 5005 H34 MF - PVC 3 1500 3000 36.45 X268611 5005 H34 MF - PVC 3 1500 3600 43.90 X127061 5005 H34 MF - PVC 3 1500 3600 43.74 X X

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

126401 5005 H34 MF 4 1200 2400 31.10 X X X X X X138865 5005 H34 MF 4 1200 3000 38.88 X126400 5005 H34 MF 5 1200 2400 38.88 X X X X X X103937 5005 H34 MF 6 1200 2400 46.66 X X X X X X126400 5005 H34 MF 5 1200 2400 38.88 X X X X X X103937 5005 H34 MF 6 1200 2400 46.66 X X X X X X

SH

EE

T &

PL

AT

E



Sheet - 5052 Marine Sheet

Sheet - 5251

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

127113 5052 H32 MF 1 1200 2400 7.75 X172224 5052 H32 MF 1 1260 5000 16.95 X127115 5052 H32 MF 1.2 1200 2400 9.30 X

169647 5052 H32 MF 1.6 1200 2400 12.40 X X X127143 5052 H32 MF 1.6 1200 6000 30.99 X219138 5052 H32 MF 2 1200 1800 11.66 X123165 5052 H32 MF 2 1200 2400 15.55 X X X X X X127103 5052 H32 MF 2 1200 6000 38.74 X X127178 5052 H32 MF 2.5 1200 2400 19.37 X X X X X212504 5052 H32 MF - PVC 2.5 1200 2400 19.51 X127179 5052 H32 MF 2.5 1200 6000 48.42 X178621 5052 H32 MF 2.5 1500 2400 24.30 X123166 5052 H32 MF 2.5 1500 3000 30.26 X

256695 5052 H32 MF 2.6 1200 2400 15.55 X225486 5052 H32 MF 3 1200 1800 17.43 X104569 5052 H32 MF 3 1200 2400 23.24 X X X X X X127130 5052 H32 MF 3 1200 6000 58.10 X X137141 5052 H32 MF 3 1500 2400 29.27 X212251 5052 H32 MF 3 1500 3000 36.32 X127146 5052 H32 MF 3 1500 3600 43.58 X127132 5052 H32 MF 3 1500 6000 72.63 X127135 5052 H32 MF 4 1200 2400 31.38 X X127246 5052 H32 MF 4 1200 6100 79.75 X

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

297394 5251 H34 MF 3 1500 3000 36.45 X

SH

EE

T &

PL

AT

E



Sheet - 5052 Sign Sheet

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

223997 5052 H38 MF 1.55 750 3000 9.38 X

223998 5052 H38 MF 1.55 900 1800 6.76 X

221319 5052 H38 MF 1.55 1200 2400 12.01 X

231492 5052 H38 MF-ETCH 1.55 1200 2400 12.01 X

231468 5052 H38 MF 1.55 1200 2700 13.51 X

231493 5052 H38 MF-ETCH 1.55 1200 2700 13.51 X

221318 5052 H38 MF 1.55 1200 3000 15.01 X

231494 5052 H38 MF-ETCH 1.55 1200 3000 15.01 X

223999 5052 H38 MF 1.55 900 3600 13.51 X

221320 5052 H38 MF 1.55 1200 3600 18.01 X

231495 5052 H38 MF-ETCH 1.55 1200 3600 18.01 X

127248 5052 H38 MF 1.6 750 3000 9.68 X

127250 5052 H38 MF 1.6 900 1800 6.97 X

127251 5052 H38 MF 1.6 900 2400 9.30 X

127252 5052 H38 MF 1.6 1200 2400 12.40 X

231469 5052 H38 MF 1.95 600 3600 11.33 X

231497 5052 H38 MF-ETCH 1.95 600 3600 11.33 X

221321 5052 H38 MF 1.95 750 3000 11.80 X

231496 5052 H38 MF-ETCH 1.95 750 3000 11.80 X

231520 5052 H38 MF 1.95 900 1800 8.50 X

231498 5052 H38 MF-ETCH 1.95 900 1800 8.50 X

221322 5052 H38 MF 1.95 900 2100 9.91 X

231499 5052 H38 MF-ETCH 1.95 900 2100 9.91 X

221323 5052 H38 MF 1.95 1200 2400 15.11 X

266738 5052 H38 MF-ETCH 1.95 1200 2400 15.11 X

SH

EE

T &

PL

AT

E



Plate - 5083

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

123146 5083 H116 MF - DNV 3 1200 2400 22.98 X X X X

126470 5083 H116 MF - DNV 3 1200 6100 58.41 X X X

126472 5083 H116 MF - DNV 3 1525 6100 74.23 X X X X X

159467 5083 H116 MF - DNV 3 1830 9000 118.29 X

134782 5083 H116 MF - DNV 3 2200 9000 158.00 X X

110468 5083 H116 MF - DNV 4 1200 2400 31.10 X X X X X X

126473 5083 H116 MF - DNV 4 1200 6100 77.88 X X X X

126476 5083 H116 MF - DNV 4 1525 6100 98.98 X X X

126477 5083 H116 MF - DNV 4 1830 6100 118.77 X X

123147 5083 H116 MF - DNV 4 1830 9000 175.24 X

126478 5083 H116 MF - DNV 4 2200 9000 210.67 X X X X

104564 5083 H116 MF - DNV 5 1200 2400 38.30 X X X X X X

110469 5083 H116 MF - DNV 5 1200 6100 97.37 X X X

123149 5083 H116 MF - DNV 5 1525 6100 123.72 X X X

126482 5083 H116 MF - DNV 5 1830 6100 148.47 X X X

126483 5083 H116 MF - DNV 5 1830 9000 219.05 X X

172454 5083 H116 MF 5 1830 11000 267.73 X

123150 5083 H116 MF - DNV 5 2200 9000 263.34 X X X X X

266389 5083 H116 MF - DNV 5 2200 11000 321.86 X

126439 5083 H116 MF - DNV 6 1200 2400 45.96 X X X X X X

123151 5083 H116 MF - DNV 6 1200 6100 116.82 X X X

123152 5083 H116 MF - DNV 6 1525 6100 148.47 X X X

126490 5083 H116 MF - DNV 6 1830 6100 178.16 X X X X

126491 5083 H116 MF - DNV 6 1830 9000 262.86 X

126443 5083 H116 MF 6 1830 11000 321.27 X

262250 5083 H116 MF - DNV 6 1980 11000 347.61 X

219829 5083 H116 MF 6 2100 6000 201.10 X

126496 5083 H116 MF - DNV 6 2200 9000 316.01 X X X X X

126498 5083 H116 MF - DNV 8 1200 6100 155.77 X X X

126502 5083 H116 MF - DNV 8 1830 9000 350.48 X

SH

EE

T &

PL

AT

E



Plate - 5083 - Continued

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

123153 5083 H116 MF - DNV 8 1200 2400 61.29 X X X X X X

126501 5083 H116 MF - DNV 8 1830 6100 237.55 X X

126503 5083 H116 MF - DNV 8 2200 9000 421.34 X X X X X

126450 5083 H116 MF 10 1200 2400 76.61 X

223439 5083 H116 MF 10 1220 2500 81.13 X X

126460 5083 H116 MF - DNV 10 1200 2400 76.61 X X X X

126504 5083 H116 MF - DNV 10 1200 6100 194.71 X X X

287414 5083 H116 MF - DNV 10 1830 6100 226.41 X

155440 5083 H116 MF - DNV 10 2200 9000 526.68 X X

126506 5083 H116 MF - DNV 12 1200 6100 233.65 X X

172143 5083 H116 MF - DNV 12 2200 9000 632.02 X

123154 5083 H116 MF - DNV 12 1200 2400 91.93 X X X X X

126507 5083 H116 MF - DNV 16 1200 6100 311.54 X X

155648 5083 H116 MF - DNV 16 2200 9000 842.69 X

126508 5083 H116 MF - DNV 20 1200 6100 389.42 X X

202032 5083 H116 MF - DNV 20 2000 9000 957.60 X

126415 5083 H116 MF - DNV 25 1200 6100 486.78 X X

172146 5083 H116 MF - DNV 32 1200 6100 623.08 X

172147 5083 H116 MF - DNV 40 1200 6100 778.85 X

172148 5083 H116 MF - DNV 50 1200 6100 973.56 X

208707 5083 H112 MF - DNV 65 1200 6100 1265.63 X

172150 5083 H112 MF - DNV 76 1200 6100 1483.70 X

172130 5083 H111 MF - DNV 100 1200 6100 1947.12 X

Plate - 5052

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

126563 5052 O MF 4 1220 2440 32.03 X

172160 5052 H32 MF 4 1220 2450 31.63 X

Plate - 5454 Mill Bright

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

266390 5454 H34 MB - PVC 5 1830 11000 267.73 X

SH

EE

T &

PL

AT

E



Treadplate

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

296901 5052 O MF 1.4 1200 2400 - X

300868 5052 O PC-BLK 1.4 1200 2400 - X

103935 5052 O MF 1.6 1200 2400 13.73 X X X X X X

100086 5052 H114 MF 2 1200 2400 16.82 X X X X X X

100087 5052 H114 MF 2.5 1200 2400 20.68 X X X X X X

126269 3003 H22 MF 2.54 1525 2430 28.53 X

100088 5052 H114 MF 3 1200 2400 25.23 X X X X X X

100089 5052 O MF 3 1200 6000 63.07 X X

194599 5052 H114 MF 3 1500 3000 39.42 X X

126284 5052 O MF 3 1500 6000 78.84 X X

126286 5052 O MF 4 1200 2400 32.95 X X X X X

126271 5052 O MF 4 1200 6000 82.37 X X

126272 5052 O MF 4 1500 6000 102.96 X

104041 5052 O MF 5 1200 2400 40.67 X X X X X X

131310 5052 O MF 5 1200 3660 62.02 X

126273 5052 O MF 5 1200 6000 101.66 X X

126274 5052 F MF 5 1500 6000 133.20 X

103936 5052 O MF 6 1200 2400 48.38 X X X X X X

273625 5052 O MF 6 1500 3000 75.60 X X X

SH

EE

T &

PL

AT

E

Note: Hires image missing



Mesh

Material Code

DescriptionThick(mm)

Width(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

209519 Security Mesh 7mm 7 750 2050 X126321 Security Mesh 7mm 7 1250 2000 X183674 Security Mesh 7mm 7 1250 2050 X126322 Security Mesh 7mm 7 1250 2460 X X185953 Security Mesh 7mm 7 1250 2470 X238300 Walkway Mesh 13mm 13 600 5860 X238299 Walkway Mesh 22mm 22 600 5860 X137429 DVA Mesh - 900 2200 X238301 Mesh - - 5830 X

238302 Mesh - - 5830 X298862 Mesh - - 6000 X

Propellor Plate

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

158740 3003 H22 MF 1.6 1200 2400 13.82 X X X X X148540 3003 H22 MF 1.6 1219 2438 14.26 X190291 3003 H24 MF 2 1200 2400 17.24 X126270 3003 H22 MF 3 1200 2400 25.23 X X X148541 3003 H22 MF 3 1219 2438 26.74 X X148542 3003 H22 MF 5 1219 2438 44.57 X

SH

EE

T &

PL

AT

E

Note: Hires image missing



Coil

Material Code


Width(mm)

Stocked

NS

W

QL

D

SC

VIC SA

WA

125062 5005 H34 MF 0.6 1200 X

125063 5005 H34 MF 0.7 1200 X

125084 5005 H34 MF 0.7 1200 X

125064 5005 H34 MF 0.8 1200 X

125020 3003 H16 MF 0.8 2515 X

125065 5005 H34 MF 0.9 1200 X

125071 5005 H34 MF 1 1200 X

125073 5005 H34 MF 1.2 1200 X

238998 5005 H34 MF - PVC 1.2 1200 X

125074 5005 H34 MF - PVC 1.5 1200 X

223171 5005 H34 TAQ - PVC 1.5 1200 X

125123 5052 H32 MF 1.6 1200 X

125077 5005 H34 MF 1.6 1200 X

204739 5005 H34 MF - PVC 1.6 1200 X

259589 5052 H32 MF 2 692 X

125126 5052 H32 MF 2 1200 X X

125082 5005 H34 MF - PVC 2 1200 X

244590 5005 H34 TAQ - PVC 2 1200 X

125135 5052 H32 MF 3 1200 X X

125081 5005 H34 MF 3 1200 X

244727 5005 H34 TAQ - PVC 3 1200 X

SH

EE

T &

PL

AT

E


51

Building Materials

Capral Aluminium Industrial Solutions is in partnership with a diverse range of customers across the Building and Construction industries.

In addition to our comprehensive range of standard geometric extrusions and at products, we supply a wide range of extrusions designed for the speci c production and installation of Aluminium fencing, balustrades, roof cladding, louvres and screening. Our capability extends to all matter of commercial facades and architectural work.

Talk to Capral Aluminium Industrial Solutions today about the solutions we offer your industry or learn more at www.capral.com.au/IndustrialSolutions

BU

ILD

ING

MA

TE

RIA

LS



Louvres & Screening

LO

UV

RE

S &

SC

RE

EN

S

Material Code

DescriptionSection Image

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

288893 Interlocking Box 150 X 45mm 6500 15.77 X

290071 Interlocking Box Infill 150 X 45mm 6500 3.78 X

268966 Louvre Blade (Wide Eliptical) 75mm 6700 6.92 X

268047 Louvre Bracket (Suits 150 & 175mm Blade) 4000 15.51 X

282729 Louvre Blade (Curved) 85mm 6500 4.17 X

225513 Louvre Blade (Screw Flute) 100mm 6500 5.69 X X

266838 Louvre Blade (Waterproof) 130mm 6500 5.90 X X

281908 Louvre Blade 90 X 15mm 6500 5.23 X

216818 Louvre Blade 120 X 20mm 6500 8.35 X X








256430 Louvre Blade 60 X 20mm 6500 2.61 X X X

184262 Louvre Blade 88mm 6500 5.35 X X

189288 Louvre Blade 50mm 6000 2.21 X X

292579 Louvre Blade 50mm 6500 2.38 X



Slatted Screen System

Capral Aluminium’s slating system, requires NO WELDING, offering the end user simpli ed fabrication and installation exibility for fencing and privacy screen applications

SL

AT

TE

D S

CR

EE

N

• Use any of our 50mm posts to create a screen

• Hinge to create a matching gate• Use standard 50mm caps to create

a great nish• Channel can be used to secure into

new or existing rendered walls

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

265280 Fence Post 1 Way 50mm 5500 6.26 X X X


267904 Fence Post Corner 5500 7.06 X X

267955 Rectangular Tube 65 X 16 X 1.27 6500 3.77 X X X

126064 Channel 20 x 20 x 1.6 6500 1.60 X X X

260383 Rectangual Box 28 x 16 x 1.4 6500 2.43 X X X

157979 Rectangual Box 65 x 16 x 1.4 6500 3.76 X X X X

225514 Rectangual Box 100 x 16 x 1.4 6500 5.81 X X

223503 Square Box 16 x 1.75 6500 1.72 X X



Fencing & Balustrading Extrusions

BA

LU

ST

RA

DE

S

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

294804 Baluster 15.88mm 6500 1.89 X

294799 Balustrade Post 400mm 6000 8.35 X

294796 Bottom Rail 46.5mm 6500 2.87 X

294795 Capping Rail (Colonial) 6500 5.27 X

294792 Capping Rail (Eliptical) 77mm 6500 4.02 X

294794 Capping Rail (Round) 60mm 6500 4.65 X

294793 Capping Rail (Small) 57mm 6500 3.28 X

198326 Cutout Balustrade Box 40x40 6500 5.36 X

285657 Cutout Balustrade Box 40x40 6500 6.60 X



267904 Fence Post Corner 5500 7.06 X X

186465 Gate Track 20mm 6000 7.60 X X

294802 Glazing Adaptor (Wrap Around) 6000 2.40 X

124998 Glazing Balustrade Infill Round 60mm 6500 1.30 X

294801 Glazing Bead 6000 0.88 X

294798 Glazing Channel (Deep) 46.5mm 6500 3.88 X

225512 Glazing Channel 28 X 28 6500 3.70 X X

184181 Glazing Handrail 1 Way 70 X 35 6500 12.64 X

182699 Glazing Handrail 2 Way 70 X 35 6500 13.64 X



BA

LU

ST

RA

DE

S

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

125001 Glazing Handrail Round 60mm 6500 7.90 X

294800 Infill Section 43mm 3000 0.52 X

194878 Infill to Suit Cap / Wedge Round 4000 0.88 X X

294803 Midrail 46.5mm 6500 3.85 X

209137Oval Handrail Glazed 70 x 30

(184188 infill)6500 6.70 X X

124997 Oval Handrail 70 x 40mm 6500 5.40 X X

214731 Oval Hollow 70 x 30 6500 5.08 X X

280374 Oval Sleeve (Suits 70 X 30mm Handrail) 4000 3.43 X

267955 Rectangular Tube 65 X 16 X 1.27 6500 3.77 X X X

272437 Rectangular Tube 65 X 16 X 1.27 6000 3.47 X

294760 Square Balustrade 1 Way Post 50mm 6500 12.06 X

184189 Square Balustrade 1 Way Post 50mm 6600 11.65 X X

265282 Square Balustrade 1 Way Post 50mm 6600 12.25 X

184191 Square Balustrade 2 Way 90° Post 50mm 6600 10.94 X


294749 Square Balustrade Post 90° 6500 12.86 X


184190 Square Balustrade 2 Way Post 50mm 6600 13.66 X X

294748 Square Balustrade Post 180° 6500 13.78 X

202038 Square Balustrade 45° Post 50mm 6600 12.35 X X X

184188 Square Balustrade Infill 50mm 6000 1.04 X X X

200121 Wedge Post / 1 Way Cap 50mm 6500 10.15 X X X

194877 Wedge Post / 180 Deg Cap 50mm 6500 11.33 X X X

196107 Wedge Post / Corner Cap 50mm 6500 10.40 X X

294797 Welded Channel 46.5mm 6500 3.26 X


56

Transport

Capral Aluminium Industrial Solutions is in partnership with a diverse range of customers across the Transport industry.

In addition to our comprehensive range of standard geometric extrusions and at products. We supply a wide range of extrusions ideal for utilisation across the manufacture of Tankers, Tippers, Trucks, Buses, Bullbars, Ute Trays, Recreational and Specialised Vehicles.

Talk to Capral Aluminium Industrial Solutions today about the solutions we offer the Transport industry or learn more at www.capral.com.au/IndustrialSolutions

TR

AN

SP

OR

T



Transport Extrusions

TR

AN

SP

OR

T

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

250591 Angle 63 x 63 x 4.5 5000 7.41 X

124980 Angle 90 x 70 x 6 6000 14.96 X

257553 Beam Base 8400 56.01 X

257554 Beam Base 11000 73.35 X X

280857 Beam Base 11000 80.91 X

215866 Bottom Coaming 294 x 230 11000 114.93 X

127571 Bull Bar Channel 254 x 115 x 12.5 2450 37.20 X

127514 Bull Bar Channel 381 x 152.4 x 12.7 2500 48.93 X X

284121 Bull Bar Channel 381 x 152.4 x 12.7 x 9.5 2700 52.84 X

144647 Bull Bar Channel 126.5 x 60.5 5500 15.87 X

127619 Bull Bar Channel 175 x 100 x 7 6000 36.97 X

110449 Bull Bar Channel 127 x 63 x 6 6800 33.12 X

127570 Bull Bar I Beam 140 x 89 x 8 5500 35.93 X X

127644 Coaming with lip (4 Tonne) 4420 7.14 X

127647 Coaming with lip (4 Tonne) 5500 8.88 X

209253 Tray side coaming 5500 6.83 X

127422 Tray Floor Plank 150mm 1836 2.92 X

266439 Tray Floor Plank 150mm 1890 2.94 X

127599 Floor Plank 150mm 1987 3.19 X

127555 Heavy Floor Plank 152mm 2460 7.60 X

127600 Floor Plank 150mm 2500 4.01 X X

127559 Tray Front Plank 141mm 3685 5.73 X

269088 Floor Plank (4 Tonne) 3900 6.23 X

285530 Floor Plank 4580 8.33 X X

127598 Floor Plank 150mm 6500 2.93 X

175273 Front Floor Plank 90mm 3840 4.10 X



TR

AN

SP

OR

T

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

284855 Light track 6600 17.21 X

284852 Light track 8400 21.90 X

294759 Lipped Channel 97.79 X 76.2 6000 23.91 X

280866 Tipper Return Lip Channel 6500 31.51 X

127634 4" Runner 5055 12.24 X

127635 4" Runner 6500 15.74 X

294789 Main Runner 8400 149.00 X

294788 Main Runner 11000 195.12 X

193953 Main Tipper Runner 8400 116.93 X

280856 Main Runner (Large) 11000 153.12 X

277446 Main Tube Beam Web 11000 199.96 X X X

284974 Mud Guard 4000 18.55 X

175274 Raised Rear Coaming 3840 5.06 X

285527 Rear Coaming (6 Tonne) 5000 9.63 X X

127433 Rear Corner Tipper Post 2500 22.04 X

127434 Rear Corner Tipper Post 2900 25.57 X

294758 Rear Post 140 X 70 4200 25.07 X

127550 Rear Starter Plank 19mm 2470 3.72 X

127667 Road Channel 200 X 90 2445 21.58 X

127655 Rope Rail Bracket 4150 10.29 X

127453 Rope Rail Bracket 25mm 6500 16.14 X X

294784 Rope Rail Bracket 79.73 X 54 6500 17.29 X

294786 Rub Rail 76.2 6500 7.46 X

294787 Rub Rail 101.6 6500 7.54 X

294790 Double Rub Rail 6500 4.49 X



TR

AN

SP

OR

T

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

127650 Side Coaming (4 Tonne) 4880 7.84 X

221684 Side Coaming (4 Tonne) 7770 12.48 X

285528 Side Coaming (6 Tonne) 7500 12.08 X X

127602 Side Coaming 30mm 4920 6.11 X

127549 Side Coaming 73mm 8840 22.58 X

260242 Side Coaming Rail 5700 8.24 X

127512 Spotlight Mounting Bracket 4000 11.73 X

285529 Starter Plank (6 Tonne) 5000 8.69 X X

294780 Tailgate AON Plate 210 x 50 5200 29.98 X

294781 Tailgate Frame 92 x 50 5500 15.30 X

294785 Tailgate Frame 160 x 30 5500 29.65 X

155452 Tipper Back Channel with Lip 2285 44.19 X

127719 Tipper Beam Side 400 x 100 11000 91.36 X

281980 Tipper Body Corner Post 6200 48.33 X

127701 Large Bottom Tipper Corner 8400 72.55 X

127425 Tipper Bottom Corner 11000 114.94 X

150039 Tipper Bottom Corner 11000 71.94 X

156939 Tipper Grain door extrusion 6000 6.71 X

280846 Tipper Large Top Rail 11000 117.10 X

127674 Tipper Small Top Rail 6000 45.26 X

280864 Tipper Tailgate Top Rail 2210 15.31 X

127561 Tipper Rear Coaming 2400 16.85 X

127603 Drop Side 1850 3.91 X

127604 Drop Side 2400 5.07 X



Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

294782 Top Coaming 142 x 82 11700 54.91 X

294783 Top Coaming 169 x 83 11700 61.69 X

144657 Top Coaming Rail 8400 85.30 X

127568 Top Coaming Rail 11000 111.71 X

127609 Headboard Channel 5530 3.39 X

127612 Headboard Outer Corner 3000 5.44 X X

127548 Corrugated Head Board 229mm 7500 16.49 X

127610 Tray Headboard Channel 3840 3.43 X

301100 Tray Head Board 225mm 6000 13.48 X

TR

AN

SP

OR

T



Marine

Capral Aluminium Industrial Solutions is in partnership with a diverse range of customers across the Marine industry.

In addition to our comprehensive range of standard geometric extrusions and at products. We supply a wide range of extrusions ideal for applications across the manufacture of ships, boats, large barges and pontoons - whether the customer is operating a production line or building small one-off craft.

Talk to Capral Aluminium Industrial Solutions today about the solutions we offer the Marine industry or learn more at www.capral.com.au/IndustrialSolutions

MA

RIN

E

61



Marine Extrusions

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

127498 Boat Chine 2mm 5600 3.84 X

127458 Boat Chine 3.2mm 5600 5.56 X

280146 Boat Chine 4mm 6000 7.28 X

127530 Boat Chine 4mm 6500 5.43 X X

127541 Boat Keel 3mm 5500 12.82 X

158623 Boat Keel Large 3.2mm 5340 4.48 X





226148 Box Rib 6000 6.60 X

175261 Decking Section 250mm 6025 12.70 X










MA

RIN

E



MA

RIN

E

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126374 Double Sided Rope Track 6000 - X

175271 Fender Section 9600 120.90 X

175256 Fender Section 9600 96.11 X

275534 Gunwhale 3.2mm 6500 9.39 X

144648 Gunwhale 3.2mm 5200 7.49 X

127444 Gunwhale 3.2mm 6500 9.37 X

158723 Gunwhale 4mm 4000 3.89 X

158625 Gunwhale 4mm 6500 6.32 X

275769 Gunwhale 4.25mm 6500 9.41 X

144651 Gunwhale Large 6000 8.51 X

126375 Half Round 39 X 24.5 mm 6000 3.19 X

144652 Half Round 39mm 6000 3.21 X X

126376 Half Round 50 X 30 mm 6000 4.66 X X

295464 Louvre Blade 6100 3.12 X

295465 Louvre Spacer 6000 11.18 X

299277 Ribbed Facia 50mm 6500 3.47 X

127496 Ribbed Facia 80mm 6500 5.68 X X

127531 Ribbed Facia 90mm 6500 7.09 X X

275273 Smooth Facia 50mm 6500 3.84 X

190287 Smooth Facia 90mm 4600 4.69 X

158627 Smooth Facia 90mm 6000 6.05 X X

127536 Smooth Ribbed Facia 50mm 6500 3.80 X X

Marine Extrusions - Continued



Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

110454 Rope Rail Suits 6mm 6000 1.38 X X

273837 Rope Rail Suits 10mm 6000 1.81 X

126370 Single Annex / Sail Track 6000 .14 X

144653 Small Angled Aluminium Gunwhale 6000 5.02 X X

172306 Spray Rail 6500 24.49 X

127437 Sun Visor Frame 5000 1.33 X X X

165792 Tie down Bracket (20 per box) 50 0.16 X

165791 Tie down Bracket (50 per box) 12 0.04 X

158626 Top Hat 4867 4.76 X

177613 Towing Cleat (20 per box) 12 0.13 X

275275 Transom Box - Radius 6500 11.15 X

Marine Extrusions - Continued

MA

RIN

E



Marine Round Tube

Material Code


(mm)Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126866 6082 T5 MF - DNV 48.4 4.47 5850 9.75 X

126868 6082 T5 MF - DNV 50 4 5850 9.13 X X

126869 6082 T5 MF - DNV 50 6 6000 13.43 X X

303027 6082 T5 MF - DNV 50 6.35 6000 18.34 X

126871 6082 T5 MF - DNV 63.5 6.35 5850 17.88 X X X

126872 6082 T5 MF - DNV 63.5 12 6000 18.34 X

172213 6082 T5 MF - DNV 73 5.16 5850 17.38 X

126873 6082 T5 MF - DNV 76.2 6.35 6000 22.57 X X

285664 6082 T6 MF - DNV 76.2 6.35 6000 22.57 X

126874 6082 T5 MF - DNV 80 3 6000 11.76 X

126875 6082 T5 MF - DNV 80 6 5850 22.08 X

126885 6082 T6 MF - DNV 88.9 5.35 6000 22.66 X

126876 6082 T5 MF - DNV 88.9 6.30 6000 26.48 X X

126862 6082 T5 MF - DNV 100 6 5850 28.09 X

126877 6082 T5 MF - DNV 100 10 6000 45.80 X X

172216 6082 T6 MF - DNV 101 3.25 6000 16.31 X

126878 6082 T5 MF - DNV 101.6 6.35 6000 30.78 X X X

285665 6082 T6 MF - DNV 101.6 6.35 6000 30.78 X

126879 6082 T5 MF - DNV 114.3 6.35 6000 34.88 X X

126880 6082 T5 MF - DNV 127 19.05 4000 69.75 X X

126886 6082 T6 MF - DNV 152.4 6 4000 98.18 X X

184982 6082 T6 MF - DNV 160 6 6000 76.39 X

126887 6082 T6 MF - DNV 160 10 5850 74.42 X X

184984 6082 T6 MF - DNV 162 6 6000 47.63 X

303032 6082 T6 MF - DNV 177.8 12.7 6000 64.03 X

302976 6082 T5 MF - DNV 200 10 4000 76.54 X

172217 6082 T6 MF - DNV 203 3 6000 30.56 X X

126881 6082 T5 MF - DNV 205.6 12.7 4000 83.12 X

172218 6082 T6 MF - DNV 219 8.2 5850 85.77 X

172219 6082 T6 MF - DNV 219 12.7 6000 136.26 X

256301 6082 T6 MF - DNV 254 12 6000 147.73 X

MA

RIN

E



Marine Solid Round Bar

Material Code


(mm)Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

126594 6082 T5 MF - DNV 90 3000 51.53 X

126598 6082 T6 MF - DNV 100 3000 63.62 X

126599 6082 T6 MF - DNV 127 3000 102.61 X

126597 6082 T6 MF - DNV 152.4 2000 97.05 X

Marine Solid Square Bar

Material Code


Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

172227 6082 T6 MF - DNV 50 4000 27.10 X

MA

RIN

E



Marine Rectangular Box - Radius Edge

Material Code


Width(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126650 6082 T5 MF - DNV 50 25 3 5850 6.56 X303030 6082 T5 MF - DNV 50 25 3 6000 6.73 X126651 6082 T5 MF - DNV 50 40 3 6500 8.87 X126654 6082 T5 MF - DNV 100 50 3 5850 13.64 X303020 6082 T5 MF - DNV 100 50 3 6000 13.99 X144626 6082 T5 MF - DNV 100 50 6 6500 28.16 X126655 6082 T5 MF - DNV 101 63 4 6500 22.01 X126653 6082 T5 MF - DNV 152 76 6.4 5850 43.35 X X134786 6082 T5 MF - DNV 200 50 3 5850 23.13 X X

Marine Square Box - Radius Edge

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

127364 6082 T5 MF - DNV 50.8 3.2 5850 9.43 X275786 6082 T6 MF - DNV 76 3 6200 14.35 X127367 6082 T5 MF - DNV 80 6 6000 29.08 X X127365 6082 T5 MF - DNV 102 6.35 5850 36.57 X X X172229 6082 T5 MF - DNV 178 9 5000 81.68 X

MA

RIN

EM

AR

INE



Marine T–Bar

Material Code


Height(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

127396 6082 T5 MF - DNV 40 40 4 5850 4.91 X X X X X X

127389 6082 T6 MF - DNV 50 35 2 6000 2.75 X

127398 6082 T6 MF - DNV 50 35 3 6000 4.05 X

127390 6082 T6 MF - DNV 50 50 4 5850 6.17 X

172233 6082 T6 MF - DNV 50 50 4 6000 6.33 X

127392 6082 T5 MF - DNV 50 50 6 5850 9.19 X X

127397 6082 T5 MF - DNV 54 31.7 4 6000 5.42 X

127393 6082 T5 MF - DNV 60 50 4 6000 8.47 X

172236 6082 T6 MF - DNV 60 50 4 6000 8.47 X

172234 6082 T6 MF - DNV 60 50 4 10800 15.24 X

172242 6082 T6 MF - DNV 70 50 4 6000 10.61 X

172240 6082 T6 MF - DNV 70 50 4 10800 19.11 X

172246 6082 T6 MF - DNV 100 45 5 6000 13.40 X

200913 6082 T6 MF - DNV 100 45 5 10800 24.12 X

172251 6082 T6 MF - DNV 128 35 5 6000 14.35 X

172254 6082 T6 MF - DNV 128 35 5 9600 22.95 X

172255 6082 T6 MF - DNV 139 80 5 6000 21.67 X

127404 6082 T6 MF - DNV 156 50 6 6000 19.53 X

172263 6082 T6 MF - DNV 156 50 6 9600 31.29 X

172256 6082 T6 MF - DNV 163 80 5 6000 23.60 X

127406 6082 T6 MF - DNV 208 80 6 6000 30.06 X

172269 6082 T6 MF - DNV 308 100 5 6000 37.68 X

172277 6082 T6 MF - DNV 370 120 6 9600 87.76 X

262814 6082 T6 MF - DNV 402 120 6 6000 30.83 X

262820 6082 T6 MF - DNV 402 120 6 10800 110.99 X

MA

RIN

E



Marine I–Beam

Material Code


Height(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

126296 6082 T6 MF - DNV 100 75 4.8 6500 25.05 X X

193786 6082 T6 MF - DNV 101 76 5 6000 23.75 X

126295 6082 T6 MF - DNV 130 80 4.8 6500 27.52 X X

172092 6082 T6 MF - DNV 176 80 5 6000 34.01 X

172095 6082 T6 MF - DNV 176 80 5 9600 54.42 X

172096 6082 T6 MF - DNV 216 80 5 6000 38.20 X X

172098 6082 T6 MF - DNV 216 80 5 9600 61.11 X

172099 6082 T6 MF - DNV 220 100 5 6000 48.82 X

172104 6082 T6 MF - DNV 270 100 6 6000 57.05 X X

172108 6082 T6 MF - DNV 316 150 6 6000 68.54 X

MA

RIN

E



Marine Channel

Channel 1

T2

Material Code

Alloy /Temper

FinishBase(mm)

Height(mm)

Thick (mm) Length(mm)

Kg/Length

Stocked

T1 T2

NS

W

QL

D

SC

VIC SA

WA

126104 6082 T5 MF - DNV 76 38.1 7.9 7.9 5500 15.07 X X X X

126105 6082 T5 MF - DNV 80 40 4 4 6000 9.89 X

123131 6082 T5 MF - DNV 80 40 6 6 6000 14.50 X X X X

126107 6082 T5 MF - DNV 100 50 5 5 4950 12.85 X X

303453 6082 T5 MF - DNV 100 50 5 5 6000 15.57 X

123133 6082 T5 MF - DNV 102 51 7.9 6.3 6000 22.50 X X

239755 6082 T6 MF - DNV 127 50.8 4 4 6000 14.65 X X

126111 6082 T5 MF - DNV 152 64 7.9 6.4 6000 31.22 X X X

262898 6082 T6 MF - DNV 200 90 10 8 7000 60.76 X

MA

RIN

E



MA

RIN

E

Material Code


Width(mm)

Thick(mm)

Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

124966 6082 T5 MF - DNV 40 40 4 5850 4.80 X

124967 6082 T5 MF - DNV 40 40 4 6000 4.93 X

124968 6082 T5 MF - DNV 40 40 6 6000 7.25 X X

124969 6082 T5 MF - DNV 50 50 4 5850 6.08 X

286010 6082 T5 MF - DNV 50 50 4 6000 6.24 X

110652 6351 T5 MF - DNV 50 50 4 6500 6.90 X

122309 6082 T5 MF - DNV 50 50 6 5850 8.91 X X

124970 6082 T5 MF - DNV 50 50 6 6000 9.14 X

124971 6082 T5 MF - DNV 63 63 6.35 5500 11.56 X X

124965 6082 T5 MF - DNV 76 76 9.53 6000 22.24 X

124972 6082 T5 MF - DNV 76.2 50.8 6.3 6000 12.62 X X

124974 6082 T5 MF - DNV 100 50 6 6000 14.09 X X X X X

124975 6082 T5 MF - DNV 101 101 9.53 5500 27.39 X X X

294820 6082 T5 MF - DNV 125 50 6 6000 16.46 X

124976 6082 T5 MF - DNV 125 80 8 6000 25.66 X

Marine Angle



Marine Flat Bar

Flat Bar Flat Bar

Flat Bar Bulb Flat Bar

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

126232 6082 T5 MF - DNV 40 5 5850 3.16 X

303022 6082 T5 MF - DNV 40 5 6000 3.24 X

126233 6082 T5 MF - DNV 40 6 5850 3.80 X X X

172085 6082 T5 MF - DNV 40 10 5850 6.34 X

172086 6082 T5 MF - DNV 50 3 5850 2.38 X

303023 6082 T5 MF - DNV 50 5 6000 4.17 X

126235 6082 T5 MF - DNV 50 6 5850 4.75 X X X

303024 6082 T5 MF - DNV 50 6 6000 4.87 X

126237 6082 T5 MF - DNV 50 8 5850 6.32 X

126238 6082 T5 MF - DNV 60 6 5850 5.69 X X

201599 6082 T5 MF - DNV 60 6 6000 5.83 X

126240 6082 T5 MF - DNV 80 6 5850 7.58 X X

303035 6082 T5 MF - DNV 80 6 6000 7.80 X

126241 6082 T5 MF - DNV 80 8 5850 10.11 X X

201598 6082 T5 MF - DNV 80 8 6000 10.37 X

126242 6082 T5 MF - DNV 80 10 5850 12.64 X

126243 6082 T5 MF - DNV 100 6 6000 9.75 X X

201765 6082 T6 MF - DNV 100 8 6000 12.95 X

123143 6082 T5 MF - DNV 100 10 5850 15.80 X

303021 6082 T5 MF - DNV 100 10 6000 16.20 X

126244 6082 T5 MF - DNV 127 9.53 4000 13.08 X

126245 6082 T5 MF - DNV 127 12.7 4000 17.50 X

126246 6082 T5 MF - DNV 160 10 4000 17.33 X

126247 6082 T5 MF - DNV 160 12 4000 20.80 X X

126258 6082 T6 MF - DNV 200 8 5850 25.26 X

MA

RIN

E



Marine Bulb Flat Bar

Material Code


Thick(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

188503 6082 T5 MF - DNV 50 4.5 6000 4.57 X

126253 6082 T5 MF - DNV 50 6 5850 5.18 X X

126250 6082 T5 MF - DNV 75 5.5 5850 8.32 X X

172083 6082 T5 MF - DNV 75 5.5 6000 8.53 X

126254 6082 T5 MF - DNV 80 6 5850 7.96 X

126251 6082 T5 MF - DNV 100 6 5850 10.11 X

172084 6082 T5 MF - DNV 100 6 6000 10.37 X

234689 6082 T5 MF - DNV 150 6 6000 16.66 X

MA

RIN

E



Marine Sheet - 5052

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

127113 5052 H32 MF 1 1200 2400 7.75 X

172224 5052 H32 MF 1 1260 5000 16.95 X

127115 5052 H32 MF 1.2 1200 2400 9.30 X

169647 5052 H32 MF 1.6 1200 2400 12.40 X X X

127143 5052 H32 MF 1.6 1200 6000 30.99 X

219138 5052 H32 MF 2 1200 1800 11.66 X

123165 5052 H32 MF 2 1200 2400 15.55 X X X X X X

127103 5052 H32 MF 2 1200 6000 38.74 X X

127178 5052 H32 MF 2.5 1200 2400 19.37 X X X X X

212504 5052 H32 MF - PVC 2.5 1200 2400 19.51 X

127179 5052 H32 MF 2.5 1200 6000 48.42 X

178621 5052 H32 MF 2.5 1500 2400 24.30 X

123166 5052 H32 MF 2.5 1500 3000 30.26 X

256695 5052 H32 MF 2.6 1200 2400 15.55 X

225486 5052 H32 MF 3 1200 1800 17.43 X

104569 5052 H32 MF 3 1200 2400 23.24 X X X X X X

127130 5052 H32 MF 3 1200 6000 58.10 X X

137141 5052 H32 MF 3 1500 2400 29.27 X

212251 5052 H32 MF 3 1500 3000 36.32 X

127146 5052 H32 MF 3 1500 3600 43.58 X

127132 5052 H32 MF 3 1500 6000 72.63 X

127135 5052 H32 MF 4 1200 2400 31.38 X X

127246 5052 H32 MF 4 1200 6100 79.75 X

MA

RIN

E



Marine Plate - 5083

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

123146 5083 H116 MF - DNV 3 1200 2400 22.98 X X X X

126470 5083 H116 MF - DNV 3 1200 6100 58.41 X X X

126472 5083 H116 MF - DNV 3 1525 6100 74.23 X X X X X

159467 5083 H116 MF - DNV 3 1830 9000 118.29 X

134782 5083 H116 MF - DNV 3 2200 9000 158.00 X X

110468 5083 H116 MF - DNV 4 1200 2400 31.10 X X X X X X

126473 5083 H116 MF - DNV 4 1200 6100 77.88 X X X X

126476 5083 H116 MF - DNV 4 1525 6100 98.98 X X X

126477 5083 H116 MF - DNV 4 1830 6100 118.77 X X

123147 5083 H116 MF - DNV 4 1830 9000 175.24 X

126478 5083 H116 MF - DNV 4 2200 9000 210.67 X X X X

104564 5083 H116 MF - DNV 5 1200 2400 38.30 X X X X X X

110469 5083 H116 MF - DNV 5 1200 6100 97.37 X X X

123149 5083 H116 MF - DNV 5 1525 6100 123.72 X X X

126482 5083 H116 MF - DNV 5 1830 6100 148.47 X X X

126483 5083 H116 MF - DNV 5 1830 9000 219.05 X X

123150 5083 H116 MF - DNV 5 2200 9000 263.34 X X X X X

266389 5083 H116 MF - DNV 5 2200 11000 321.86 X

126439 5083 H116 MF - DNV 6 1200 2400 45.96 X X X X X X

123151 5083 H116 MF - DNV 6 1200 6100 116.82 X X X

123152 5083 H116 MF - DNV 6 1525 6100 148.47 X X X

126490 5083 H116 MF - DNV 6 1830 6100 178.16 X X X X

126491 5083 H116 MF - DNV 6 1830 9000 262.86 X

126443 5083 H116 MF 6 1830 11000 321.27 X

262250 5083 H116 MF - DNV 6 1980 11000 347.61 X

126496 5083 H116 MF - DNV 6 2200 9000 316.01 X X X X X

126498 5083 H116 MF - DNV 8 1200 6100 155.77 X X X

126502 5083 H116 MF - DNV 8 1830 9000 350.48 X

123153 5083 H116 MF - DNV 8 1200 2400 61.29 X X X X X X

126501 5083 H116 MF - DNV 8 1830 6100 237.55 X X

MA

RIN

E



Marine Plate - 5083 - Continued

Material Code


Width(mm)

Length(mm)

Kg/LengthStocked

NS

W

QL

D

SC

VIC SA

WA

126503 5083 H116 MF - DNV 8 2200 9000 421.34 X X X X X

126460 5083 H116 MF - DNV 10 1200 2400 76.61 X X X X

126504 5083 H116 MF - DNV 10 1200 6100 194.71 X X X

287414 5083 H116 MF - DNV 10 1830 6100 226.41 X

155440 5083 H116 MF - DNV 10 2200 9000 526.68 X X

126506 5083 H116 MF - DNV 12 1200 6100 233.65 X X

172143 5083 H116 MF - DNV 12 2200 9000 632.02 X

123154 5083 H116 MF - DNV 12 1200 2400 91.93 X X X X X

126507 5083 H116 MF - DNV 16 1200 6100 311.54 X X

155648 5083 H116 MF - DNV 16 2200 9000 842.69 X

126508 5083 H116 MF - DNV 20 1200 6100 389.42 X X

202032 5083 H116 MF - DNV 20 2000 9000 957.60 X

126415 5083 H116 MF - DNV 25 1200 6100 486.78 X X

172146 5083 H116 MF - DNV 32 1200 6100 623.08 X

172147 5083 H116 MF - DNV 40 1200 6100 778.85 X

172148 5083 H116 MF - DNV 50 1200 6100 973.56 X

208707 5083 H112 MF - DNV 65 1200 6100 1265.63 X

172150 5083 H112 MF - DNV 76 1200 6100 1483.70 X

172130 5083 H111 MF - DNV 100 1200 6100 1947.12 X

MA

RIN

E


77

Signage

Capral Aluminium Industrial Solutions is a leading supplier of sheet and extrusions to the diverse sign manufacturing market.

From the simplest at sign to the most complex neon box sign Capral Aluminium Industrial Solutions can supply the required materials to bring your clients imagination to life.

Talk to Capral Aluminium Industrial Solutions today about the solutions we offer

the Signage industry or learn more at www.capral.com.au/IndustrialSolutions

SIG

NA

GE

77



Sign Extrusions

SIG

NA

GE

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

127542 Backing Rail 6000 7.89 X

127543 Type 2A Backing Rail 6000 8.20 X

234597 Type 2A Backing Rail 7000 9.57 X

127545 Backing Rail 25mm 6000 3.81 X

127546 Backing Rail 25mm 6500 4.13 X X

234598 Backing Rail 25mm 7000 4.45 X

127486 Barrier Board 2800 5.11 X

127479 Dumbbell 6” 6000 8.30 X

127481 Dumbbell 8” 6000 10.61 X

127477 Dumbbell 8” (Heavy) 6500 16.53 X

127459 Dumbbell I Beam 6" 6000 10.06 X

127474 Female Post Bracket 6000 7.22 X

127472 Male Post Bracket 6000 6.70 X

277989 Signbox 150mm 6500 7.78 X

127467 Signbox 200mm 6500 14.74 X

281946 Stiffener A - Small Rail 6500 4.53 X

281947 Stiffener A - Small Rail Joiner 6500 7.06 X

281948 Stiffener B - Large Rail 6500 8.03 X

281949 Stiffener B -Large Rail Joiner 6500 10.52 X

291907 Street Sign Blade 150mm 6500 6.96 X

289559 Street Sign Blade 210mm 6500 11.52 X

110663 Flood Gauge Marker 150 X 50 6500 20.42 X X

126629 Flood Gauge Marker 152 X 38 6500 20.59 X

100092 Flood Gauge Marker 200 X 50 6500 25.69 X X



Cold Storage

Capral Aluminium Industrial Solutions is in partnership with a diverse range of customers across the cold storage industry.

Our speci c Coolroom extrusion range is available in Both Mill nish and Surfmist powdercoat. With lightweight sections to maximise your savings, our large variety of products and stock holding enable us to react quickly to your needs and deliver a full aluminium solution.

Talk to Capral Aluminium Industrial Solutions today about the solutions we offer Cool Room Manufacturers or learn more at www.capral.com.au/IndustrialSolutions

CO

LD

ST

OR

AG

E

79



Coolroom Extrusions

CO

LD

ST

OR

AG

E

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

124935 Angle 40 x 40 x 1.5 6500 2.07 X

263035 Angle 40 x 40 x 1.5 6500 2.07 X

124945 Angle 70 x 40x 1.5 6500 3.04 X

294754 Angle 70 x 40x 1.5 6500 3.04 X

294705 Arrowhead Coving 6500 2.00 X

294730 Arrowhead Coving 6500 2.00 X

294714 Base Channel 103 x 36 6500 4.91 X

294738 Base Channel 103 x 36 6500 4.91 X

294711 Base Channel 55.8 x 30 6500 3.28 X

294736 Base Channel 55.8 x 30 6500 3.28 X

294712 Base Channel 78 x 38 6500 4.21 X

294737 Base Channel 78 x 38 6500 4.21 X

126130 Corner Mould 35mm 6500 0.37 X

294709 Coving 50 mm 6500 2.81 X

294734 Coving 50 mm 6500 2.81 X

294710 Coving 75mm 6500 4.98 X

294735 Coving 75mm 6500 4.98 X

126128 Coolroom Channel 50mm 6000 0.41 X

294716 Channel 117 x 25 6500 6.14 X

294740 Channel 117 x 25 6500 6.14 X

294717 Channel 168 x 25 6500 10.54 X

294741 Channel 168 x 25 6500 10.54 X

289079 Channel 78 x 25mm - Mill Finish 6000 3.05 X

289080 Channel 78 x 25mm - Pearl White 6000 3.05 X

294707 Channel 53.4 x 25 x 1.2 6500 2.31 X

294732 Channel 53.4 x 25 x 1.2 6500 2.31 X

294715 Channel 92 x 25 6500 4.95 X

294739 Channel 92 x 25 6500 4.95 X

294718 Door Track 6500 10.50 X

294742 Door Track 6500 10.50 X



CO

LD

ST

OR

AG

E

Material Code


Length(mm)

Kg/Length

Stocked

NS

W

QL

D

SC

VIC SA

WA

289083 Door Jamb 35mm - Mill Finish 5100 2.57 X

289084 Door Jamb 35mm - Pearl White 5100 2.57 X

294706 Flanged Channel 6500 2.46 X

294731 Flanged Channel 6500 2.46 X

296934 Heavy Duty Door Track 139 6500 17.50 X




289081 Internal Angle 40mm - Mill Finish 6000 1.92 X

289082 Internal Angle 40mm - Pearl White 6000 1.92 X

289085 J Mould 50mm - Mill Finish 5100 2.43 X

289086 J Mould 50mm - Pearl white 5100 2.43 X

294704 Joiner 6500 1.27 X

294719 Joiner 6500 1.27 X

294708 Radius Coving 35 mm 6500 1.74 X

294733 Radius Coving 35 mm 6500 1.74 X

296938 T - Bar 40 x 20 x 1.5 6500 1.53 X

296939 T - Bar 40 x 20 x 1.5 6500 1.53 X

166974 T - Bar 40 x 40 x 1.6 6500 2.30 X

296940 T - Bar 40 x 40 x 1.6 6500 2.30 X


82

Important Safety Information

Capral Aluminium believes a strong focus on safety in all work places is essential. We take our obligation to provide a safe workplace very seriously. Our supportive, rigorously enforced safety culture ensures there is a minimum risk for our people and therefore minimum disruption to your business.

“The most important reason for making your workplace safe, is not at work at all.”

The most treasured moments of our lives happen outside of work, which is why it is so important to go home safely. An incident at work affects more than just the injured person. Capral Aluminium encourages you to take a moment before commencing any task to consider your safety and the safety of others.

Safety at our Sites

Capral Aluminium does not compromise on safety and we believe that all injuries, occupational illnesses and incidents are preventable. Achieving zero incidents is possible in all Capral Aluminium businesses by maintaining a strong focus on the health and safety of all employees, contractors and customers.

Capral Aluminium’s “Goal Zero” target aims to ensure employees can go home in the same condition that they came to work. Capral Aluminium has implemented stringent safety policies and procedures that enable us to strive for our safety goal.

We appreciate your compliance with our safety policies when you visit our sites.

SA

FE

TY


83

Customer Pickups and Exclusion Zones

Safety is a core value of Capral Aluminium Industrial Solutions, because of this we have taken measures to ensure your safety while on our premises and transporting your material home. We ask that anyone collecting from one of our premises report to the main or despatch of ces. Please help us by staying in the “Green” areas only and take direction from our staff as to where and when to park your vehicle for loading. Under no circumstances are you allowed in the Red Exclusion Zones during loading.

The following PPE is the minimum requirement needed when entering site buildings and yards. Site Requirements:

Safety vest or clothing consistingof high visibility colour andre ective strips must be wornwhen on site

Gloves are to be worn whenhandling products and packaging

Safety helmets are requiredwhile inside any building, exceptof ces and amenities

Long trousers and sleeved shirtmust be worn in loading bays

Fully enclosed footwear isrequired on all sites

Eye protection must be wornwhen within building anddesignated areas

MobileExclusionzone

Barrier set up at eachend of loading zone

High visability barriersto be set at all 4 pointsof exclusion zone

All areas markedin RED are

Exclusion Zones

2 metre minimum width,painted red Exclusion Zoneboth sides and rear

SA

FE

TY

Keep out of exclusion zones during loading

Stay in the Green to be seen


84

Load Restraint

We can arrange for the material to be delivered to you, for the relevant delivery fee. If however you wish to collect your product we will use the following guidelines to ensure your vehicle is suitable to carry the material.

Driver’s vision must not be obstructed. Overhangs that are dangerous are not acceptable, even if they are within the limits below. A minimum 300mm square bright red ag is required on any overhangs that cannot be easily seen. This is mandatory for overhangs beyond 1200mm past the end of a vehicle (i.e. for trucks)

SA

FE

TY

Capral Aluminium Industrial Solutions reserve the right to refuse any vehicle that falls outside of these guidelines.

max 2500150max

150max

StructuralRoofing/Cladding Drivers vision must

not be obstructed

~700*

60% of W W (wheel base)

Drivers vision mustnot be obstructedBright Flag

~1000*

60% of W W (wheel base)

1200

Drivers vision mustnot be obstructed

Seee notes ontruck below

~1000*

60% of W W (wheel base) 1200

If inclined, preferred method.10% of length recommended.

Bright Flag

*

W (wheel base)The Lesser of3600 or 60% of W

*Maximum 1200mm for vehicles less than 4.5 tonne or 9.5 metres (provided the rear overhang is less than 3700mm or 60% W)

max vehicle length 12.5 metres

1200

LL

or 3700The Lesser of

The rear overhang of a trailer must be less than thefront load carrying area or 3.7m (whichever is less).

No front or excessive rearoverhang is allowed


85

Load Restraint

All loads must be restrained to prevent movement during transporting of material. In particular the load must be restrained to be able to resist speci c forces in different directions of movement. Refer to the “Load Restraint Guide”, National Transport Commission (www.ntc.gov.au).

The following minimum load restraint requirements have been designed to meet the above conditions for unitised at loads. Round loads must be belly wrapped and may require extra lashing.

Recommended minimum 1 lashing per 1.5 metres along load for long or lightweight sheet.

Capral Aluminium will not load more than 50kg on roof racks or 80kg on Ute trade racks unless provided with written veri cation that the vehicle is capable of higher load.

SA

FE

TY

For more details on Load restrictions, restraints and on site safety please talk to our staff

These guidelines are provided to you by Capral Aluminium for guidance only, and compliance with applicable laws and standards remains your responsibility. Whilst Capral Aluminium has taken considerable care to develop transport safety guidelines that are effective and comply with all requirements, Capral Aluminium makes no warranty as to the applicability of these methods in all circumstances. It remains your responsibility at all times to ensure that the methods you use are adequate for the particular situation and where appropriate you should take further precautions. The contents of these guidelines are con dential to and the property of Capral Aluminium and you may only use these guidelines with permission from Capral Aluminium.

Lashing Angle to Horizontal

25mm handtightened webbing

25mm ratchet webbing

35mm ratchet webbing

10mm syntheticrope with single hitch

60 to 90° 52 kg per strap 173 kg 433 kg 87 kg




Minimum 2 lashingsper stack

Lashing Angle

LashingAngle


86

Notes

NO

TE

S


87

Notes

DIS

CL

AIM

ER


88

Disclaimer

This publication has been prepared by Capral Aluminium Industrial Solutions, an operating business group of Capral Aluminium Pty Limited ABN 78 004 213 692.

Capral Aluminium provides the information contained in this catalogue as a guide only for your information. Please note that any speci cations or technical data referred to in this publication are subject to change and/or variation or improvement without notice and no warranty as to their suitability for any use is made.

Users of this publication, to ensure accuracy and adequacy for their purposes, are requested to check the information provided in this publication to satisfy themselves as to its appropriateness and not to rely on the information without rst doing so. Unless required by law, Capral Aluminium cannot accept any responsibility for any loss, damage or consequence resulting from the use of this publication. Photographs and pictures shown are representative only of typical applications and products.

This brochure is not an offer to trade and shall not form any part of the trading terms in any transaction.

©Copyright 2013. Capral Aluminium ABN 78 004 213 692. Capral Aluminium Industrial Solutions is a Registered Trademark of Capral Aluminium Limited ABN 78 004 213 692.

Printed December 2013.

DIS

CL

AIM

ER


89

www.capral.com.au/IndustrialSolutions

1800 ALI ALI (254 254)

Sydney1/25 Wonderland Drive Eastern Creek NSW 2766 Ph: (02) 8882 6666Email : [email protected]

Brisbane 5/268 Evans Road Salisbury QLD 4107Ph: (07) 3722 6300Email: [email protected]

Sunshine Coast 17 Kerryl Street Kunda Park QLD 4556 Ph: (07) 5445 1522Email: [email protected]

Melbourne12B Kitchen Road Dandenong VIC 3175Ph: (03) 9212 2617Email: [email protected]

Adelaide 70 Grand Junction RoadKilburn SA 5084 Ph: (08) 8162 7500Email: [email protected]

Perth 6 Wellard Street Bibra Lake WA 6163Ph: (08) 6499 1200Email: [email protected]

Capral Aluminium INDUSTRIAL SOLUTIONS NATIONAL CATALOGUE · Capral Aluminium INDUSTRIAL SOLUTIONS...

Documents

Transcript of Capral Aluminium INDUSTRIAL SOLUTIONS NATIONAL CATALOGUE · Capral Aluminium INDUSTRIAL SOLUTIONS...