Bluescope Aluminium Catalogue - Edition 1

Aluminium Guide Product Catalogue Edition 1 2

Locations Phone Number Locations Phone Number

Victoria New South WalesSunshine Ph: (03) 9916 0100 Granville Ph: (02) 9681 6811

South Australia QueenslandWingfield Ph: (08) 8260 4555 Trade Coast Ph: (07) 3853 9100

Western AustraliaBibra Lake Ph: (08) 9434 1688


Victoria New South WalesClayton South Ph: (03) 8543 3444 Granville Ph: (02) 9681 6811

South Australia QueenslandWingfield Ph: (08) 8260 4555 Eagle Farm Ph: (07) 3633 8333

Western AustraliaBibra Lake Ph: (08) 9434 1688


Victoria/Tasmania New South WalesBallarat Ph: (03) 5320 7855 Albury Ph: (02) 6057 1700

Portland Ph: (03) 5522 4255 Cardiff Ph: (02) 4904 6400

Tasmania QueenslandHobart Ph: (03) 6211 4330 Gladstone Ph: (07) 4979 6400

Launceston Ph: (03) 6324 1250 Mt Isa Ph: (07) 4747 2833

Northgate (Export) Ph: (07) 3622 9222

Townsville Ph: (07) 4755 3939

Site Locations

BlueScope Sheet Metal Supplies

BlueScope Plate Supplies

BlueScope Distribution

BlueScope Distribution Pty Ltd - ABN 88 096 380 068

For aluminium enquiries call 1800 811 296

BlueScope Distribution operates from regional sites around Australia to offer a diverse range of steel products to industries including resources, transportation, automotive, construction, infastructure and agriculture.

www.bluescopedistribution.com.au

BlueScope Sheet Metal Supplies offers a diverse range of sheet and coil steel products, comprised of galvanised, zinc coated, aluminium zinc coated, hot rolled, cold rolled, pre painted, aluminised, COLORBOND® steel and ZINCALUME® steel.

www.sheetmetalsupplies.com.au

BlueScope Plate Supplies offers a range of steel plate products and services to a vast cross section of industries ranging from resources, transport, manufacturing, agriculture and many more. Offering quality plate processing capabilities that range from simple processing to more complex and precise requirements.

www.bluescopeplatesupplies.com.au

A4_Aluminium cover version2 .indd 2 19/05/2016 3:23 PM


ContentsPRODUCT SERVICE ........................................................................................................... 7

SERVICE .............................................................................................................................. 7

GRADES AND USES ........................................................................................................... 8Alloy 6063 & 6060 ...........................................................................................................................................8

Welding ......................................................................................................................................................................................................... 8

Machining ..................................................................................................................................................................................................... 8

Common Applications ................................................................................................................................................................................... 8

Alloy 6061 .......................................................................................................................................................9

Welding ......................................................................................................................................................................................................... 9

Machining ..................................................................................................................................................................................................... 9

Common Applications ................................................................................................................................................................................... 9

Alloy 6005A ...................................................................................................................................................10

Welding ....................................................................................................................................................................................................... 10

Machining ................................................................................................................................................................................................... 10

Common Applications ................................................................................................................................................................................. 10

Alloy 6106 ..................................................................................................................................................... 11

Welding ........................................................................................................................................................................................................11

Machining ....................................................................................................................................................................................................11

Common Applications ..................................................................................................................................................................................11

Alloy 6082 ......................................................................................................................................................12

Welding ....................................................................................................................................................................................................... 12

Machining ................................................................................................................................................................................................... 12


Alloy 5005 ......................................................................................................................................................13

Welding ....................................................................................................................................................................................................... 13

Machining ................................................................................................................................................................................................... 13


Alloy 5052/5251 .............................................................................................................................................14

Welding ....................................................................................................................................................................................................... 14

Machining ................................................................................................................................................................................................... 14



Alloy 5083 ......................................................................................................................................................15

Welding ....................................................................................................................................................................................................... 15

Machining ................................................................................................................................................................................................... 15


FLAT BAR .......................................................................................................................... 16

STRUCTURAL FLAT BAR ................................................................................................ 18

ANGLE ............................................................................................................................... 19

STRUCTURAL ANGLE ...................................................................................................... 20

CHANNEL .......................................................................................................................... 21

STRUCTURAL CHANNEL ................................................................................................ 22

SOLID ROUND BAR .......................................................................................................... 23

STRUCTURAL SOLID ROUND BAR ................................................................................ 24

TEE BAR ............................................................................................................................ 25

STRUCTURAL TEE BAR .................................................................................................. 26

TUBE .................................................................................................................................. 27

STRUCTURAL TUBE ........................................................................................................ 30

SQUARE HOLLOW EXTRUSIONS ................................................................................... 31

STRUCTURAL SQUARE HOLLOW EXTRUSIONS ......................................................... 33

RECTANGULAR HOLLOW EXTRUSIONS ....................................................................... 34

STRUCTURAL RECTANGULAR HOLLOW EXTRUSIONS ............................................. 36

MARINE EXTRUSIONS ..................................................................................................... 37

TRANSPORT EXTRUSIONS ............................................................................................. 42

FENCING EXTRUSIONS ................................................................................................... 56

BALUSTRADE EXTRUSIONS .......................................................................................... 59

LOUVRE EXTRUSIONS .................................................................................................... 64

SIGNAGE EXTRUSIONS ................................................................................................... 69


COOLROOM EXTRUSIONS .............................................................................................. 73

SHEET 5005 H34 ............................................................................................................... 77

SHEET 5052 / 5251 H32 .................................................................................................... 79

SHEET 5052 / 5251 H38 .................................................................................................... 80

SHEET & PLATE 5083 DNV H116 ................................................................................... 81

TREADPLATE 5BAR ......................................................................................................... 83

PAINTED SHEET & COIL .................................................................................................. 84


Product ServiceOur BlueScope businesses (BlueScope Sheet Metal Supplies, BlueScope Plate Supplies and BlueScope Distribution) offer a comprehensive range of Aluminium products throughout Australia. We service a broad range of industries such as Transport, Marine, Automotive, General Engineering and Fabrication.

Aluminium is easy to fabricate, it is corrosion resistant and resilient and has an excellent strength to weight ratio.Our product range includes standard Aluminium products, geometric and customer exclusive extrusions, sheet and coil products, tread plate and plate in a range of alloys and tempers. Painted sheet and coil products are also available. Painted aluminium, backed up by BlueScope COLORBOND® steel painting technology, is the ultimate solution for challenging building environments. They are also used for other applications like wine tanks, air condition panels and caravan panels. In addition to the full range of COLORBOND® steel colours, we also offer custom colour matching for aluminium. Please visit www.colorbond.com to see the full range of colours.

All aluminium products are supplied in accordance with AS/NZS 1866:1997.

Extruded Aluminium Products

Rolled Aluminium Products

Aluminium has many advantages. It is lightweight and strong. It is formable, corrosion resistant, readily available and 95% recyclable.

Aluminium is used in many industries, some of which include:

Marine

Automotive and Transport

Building and Architectural

Engineering

A wide variety of pre-production processing capabilities are available to enhance our customer’s productivity and profitability even before the orders are delivered. Processing options available include:

Router cutting

Laser cutting

Marking

Sheet Guillotining

CNC Router Cutting to size and shape. Cutting is computer controlled and the components are nested on an integrated CAD/CAM programming system for maximum material utilisation.

ServiceOur BlueScope Businesses (BlueScope Plate Supplies, Bluescope Sheet Metal Supplies and BlueScope Distribution) offer a range of services and facilities to assist our customers to maximise their profitability and market position. We ensure that what you need is available when you need it - lessening the impact of storage and bank charges and unnecessary labour costs.

Delivery and cycle times can be customised to suit individual customer needs. By including us in your project management team you can maximise the benefits derived from coordinated processing and delivery schedules that suit your project.


Grades and UsesAlloy 6063 & 6060This alloy is commonly used for the production of flats, angles, channels, hollows both circular and square as well as other standard aluminium suits. Its properties also lend itself to producing intricate custom design sections. They have good mechanical properties and responds well to surface treatments that enhance the aesthetics of the surface. 6063/ 6060 has excellent corrosion resistance due to the very low percentage of magnesium in its chemical composition. It responds well to Anodising and further enhances its corrosion resistance.

COMPOSITION SPECIFICATION (%) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED

Alloy Si Fe Cu Mn Mg Cr Zn TiOther

Each Total

6063 0.2-0.6 0.35 0.1 0.1 0.45-0.9 0.1 0.1 0.1 0.05 0.15

6060 0.3-0.6 0.1-0.3 0.1 0.1 0.35-0.6 0.05 0.15 0.1 0.05 0.15

MECHANICAL PROPERTY SPECIFICATION (25°C) SINGLE VALUES ARE MAXIMA EXCEPT AS NOTED

Alloy and Temper

Thickness mm Tensile Strength (Mpa) Elongation (% min in

50mm)Over Up toUltimate Yield

Min Max Min Max

6063 - T5 12 150 110 8

12 25 145 105 6

6063 -T52 12 150 205 110 8

6063 - T6 25 205 170 8

25 150 185 160 10

6060 - T5 12 150 110 8

12 25 145 105 6

6063 -T52 12 150 205 110 8

WELDINGThese alloys responds very well to all common forms of welding but for structural welds it often recommended that GTAW and GMAW methods are used.

MACHININGAlloys 6063/6060 have average machinability and therefore other alloys are generally substituted where a high level of machining is required.

COMMON APPLICATIONSVarious Architectural profile such as balustrading and window frames. 6063 & 6060 are used in many different applications due to its versatility.


Alloy 6061 This alloy is a heat treatable medium to high strength alloy that has very good properties when it comes to corrosion and weldability. It is less likely to fatigue than some high strengths alloys such as 6082 and also has some formability in T6. This alloy is a good compromise between commercial architectural alloys and super high strength alloys.



Each Total

6061 0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15

6005A 0.5-0.9 0.35 0.3 0.5 0.4-0.7 0.3 0.2 0.1 0.05 0.15


Alloy and Temper



Min Max Min Max

6061 - T6 All Thicknesses 260 240 8

6005A- T5 All Thicknesses 260 240 8

WELDINGThis alloy has a good weldability rating across all common types of welding process which in turn make it great for fabrication application.

MACHININGAlloy 6061 has average machinability and therefore other alloys are generally substituted where a high level of machining is required.

COMMON APPLICATIONS6061 is commonly used in the transport market where high strength is required but also medium fatigue strength. You will find this alloy in truck frames, bull bars & marine structures.


Alloy 6005AThis alloy is considered a structural alloy but of the 3 common structural alloys 6005A has the best extrusion characteristics. It achieves a very good extruded surface finish and is able to be extruded into thin-walled intricate shapes.



Each Total

6061 0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15

6005A 0.5-0.9 0.35 0.3 0.5 0.4-0.7 0.3 0.2 0.1 0.05 0.15


Alloy and Temper



Min Max Min Max

6061 - T6 All Thicknesses 260 240 8

6005A- T5 All Thicknesses 260 240 8

WELDINGThis alloy has an excellent rating across all common types of welding process which in turn make it great for fabrication application.

MACHININGAlloy 6005A has average machinability and therefore other alloys are generally substituted where a high level of machining is required.

COMMON APPLICATIONSDue to its surface finish properties and ability to be extruded into intricate shapes this alloy is commonly used in structural architectural products and other products requiring strength but visually appealing surface finishes.


Alloy 6106 This alloy is a heat treatable medium to high strength alloy that has very good properties when it comes to surface finish, extrudability, corrosion and weldability. It is less likely to fatigue than some high strengths alloys such as 6082 and also has some formability in T6. This alloy is an all-rounder as its strength and formability can be adjust through different tempering, it is a good compromise between commercial architectural alloys and super high strength alloys.



Each Total

6106 0.3-0.6 0.35 0.25 0.05-0.2 0.4-0.8 0.2 0.1 0 0.05 0.1


Alloy and Temper



Min Max Min Max

6106-T6 10 235 210 8

10 25 205 170 8

25 150 185 160 10


MACHININGAlloy 6106 has good machinability and therefore it can be machined into basic products.

COMMON APPLICATIONS6106 is commonly used for structural applications where the product has some intricacy or requires some degree forming and welding all while maintaining a good surface finish. You will often see this alloy used in Ladders, Pylons, Marine and Automotive structures.


Alloy 6082Alloy 6082 is a high strength alloy with excellent corrosion resistance. This structural alloy is commonly used for machining when in plate form. This newer alloy is replacing 6061 in many applications. It has a very high level of manganese and this gives a great control over the grain structure which in turn creates a very strong alloy.

Its extrudability is limited though when compare to some other structural 6000 series alloys and it tends not to have a great surface finish compared to some 6000 series alloys.



Each Total

6082 0.7-1.3 0.5 0.1 0.4-1.0 0.6-1.2 0.25 0.2 0.1 0.05 0.15


Alloy and Temper



Min Max Min Max

6082-T5 6 270 230 8

6082-T6 20 295 255 7

20 150 310 270 7

150 200 280 240 5


MACHININGAlloy 6082 has good machinability and therefore it can be machined into basic products.

COMMON APPLICATIONS6082 is used predominantly in the marine and road transport market due to its very high strength. It is also seen in civil structures and is starting to become prevalent in many other structural applications. Common products include boats, truck bodies, automotive components, food production equipment and bridges and trusses.


Alloy 5005This rolled (sheet or coil) alloy is softest of the 5000 series alloys due to its comparatively low levels of magnesium. This does however make this alloy very suitable for forming and welding. It has excellent corrosion properties and due to its low levels of magnesium it doesn’t suffer from stress corrosion like Alloy 5083.



Each Total

5005 0.3 0.7 0.2 0.2 0.5-1.1 0.1 0.25 0 0.05 0.15


Alloy and Temper



Min Max Min Max

5005-H34 0.8 6 135 180 105 4-7

WELDINGThis alloy has an excellent weldability rating across all common types of welding process which in turn make it great for fabrication application.

MACHININGAlloy 5005 has poor machinability and therefore it often substituted when machining is required.

COMMON APPLICATIONS5005 is used for most general fabrication requirements where the product is to be constructed from sheet or coil. It is very versatile and is used in products such as signs, architectural flashings and transport products.


Alloy 5052/5251Rolled (sheet or coil) alloys 5052 and 5251 are stronger than 5005 and is used in applications that require more structural integrity or more impact resistance.it is still suitable for forming and welding. It is now common place in Australia and New Zealand to interchange 5052 and 5251 as the mechanical properties are almost identical. They have excellent corrosion properties and due to their low levels of magnesium they don’t suffer from stress corrosion like Alloy 5083.



Each Total

5052 0.25 0.4 0.1 0.1 2.2-2.8 0.15-0.35 0.1 0 0.05 0.15

5251 0.4 0.5 0.15 0.1-0.5 1.7-2.4 0.15 0.15 0.15 0.05 0.15


Alloy and Temper



Min Max Min Max

5052-H32 0.5 50 215 180 105 4-7

5052-H38 0.8 3.25 270 220 4

5251-H32 0.5 50 200 255 130 5-10

5251-H34 0.5 25 230 275 180 4-8

WELDINGThese alloys have an excellent weldability rating across all common types of welding process which in turn make it great for fabrication application.

MACHININGAlloys 5052 and 5251 have poor machinability and therefore it often substituted when machining is required.

COMMON APPLICATIONS5052 and 5251 are used for most general fabrication requirements where the product is to be constructed from sheet or coil. It is very versatile and is used in products such as signs, architectural flashings, marine and transport, furniture and food processing products.


Alloy 5083This alloy is a very high strength alloy and is heavily utilized in the aluminium ship building industry in plate form. This alloy is predominantly supplied pre-certified by a third party inspection company. It has excellent corrosion resistance but because it has magnesium content higher than 3.5% it can be susceptible to stress corrosion cracking.



Each Total

5083 0.4 0.4 0.1 0.4-1.0 4.0-4.9 0.05-0.25 0.25 0.15 0.05 0.15


Alloy and Temper



Min Max Min Max

5083-H116 3 30 305 215 10

5083-H321 5 40 305 385 215 295 10

40 75 280 385 200 295 10

WELDINGThese alloys have an excellent weldability rating across all common types of welding process which in turn make it great for fabrication application.

MACHININGAlloy 5083 has poor machinability and therefore it often substituted when machining is required.

COMMON APPLICATIONSApplications for this product generally restricted to structural products requiring high levels of structural integrity. These products include pressure vessels, ships, rail cars, truck bodies, other road transport vehicles and civil structural applications.


Flat Bar

Material No.Width (mm)

Thickness (mm)

Length (mm)

Mass per length (kg)

Alloy and temper

WA SA VIC NSW QLD

134643 10 3.0 4000 0.32 6060 T5

148106 20 1.6 4000 0.35 6060 T5

148106 20 3.0 4000 0.65 6060 T5

148106 20 6.0 4300 1.40 6063 T4

148106 25 3.0 4000 0.81 6060 T5

148106 25 5.0 4000 1.36 6060 T5

148106 25 6.0 4000 1.62 6060 T5

148106 25 10.0 4000 2.71 6060 T5

148106 32 3.0 4000 1.04 6060 T5

148106 32 6.0 4000 2.08 6060 T5

148106 40 3.0 4000 1.30 6060 T5

148106 40 4.0 4000 1.74 6060 T5

148106 40 6.0 4000 2.60 6060 T5

148106 40 10.0 4000 4.33 6060 T5

148106 50 3.0 4000 1.62 6060 T5

148106 50 4.0 4000 3.25 6060 T5

148106 50 5.0 4000 2.71 6060 T5

148106 50 6.0 4000 4.86 6060 T5

148106 50 8.0 4000 4.34 6060 T5

148106 50 10.0 4000 5.42 6060 T5

148106 50 12.0 4000 6.48 6060 T5

148106 50 12.0 5000 8.10 6060 T5

148106 60 6.0 4000 3.89 6060 T5

148106 60 6.0 4000 3.89 6060 T591

148106 60 10.0 4000 6.50 6060 T5

148106 80 3.0 4000 2.59 6060 T5

148106 80 3.0 5000 3.24 6060 T5

148106 80 6.0 4000 5.20 6060 T5

148106 80 10.0 4000 8.66 6060 T5

148106 80 12.0 4000 10.41 6060 T5

R W

T



Thickness (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

148106 100 3.0 4000 3.25 6060 T5

148106 100 6.0 4000 6.50 6060 T5

148106 100 10.0 4000 10.83 6060 T5

148106 100 12.0 4000 13.01 6060 T5

148106 160 6.0 4000 10.37 6060 T5

148106 160 10.0 4000 17.33 6060 T5

148106 160 12.0 4000 20.81 6060 T5

Flat Bar (continued)

R W

T



Thickness (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

158785 40 5.0 6000 3.33 6082 T6

134668 40 6.0 6000 3.90 6082 T6

211017 50 3.0 6000 2.44 6082 T6

196031 50 4.0 6000 3.25 6082 T6

209423 50 6.0 5900 4.79 6082 T6

141654 50 6.0 6000 4.87 6082 T6

173830 50 10.0 6000 8.13 6082 T6

158809 60 6.0 6000 5.83 6082 T6

199256 60 12.0 6000 11.71 6082 T6

141668 80 6.0 6000 7.80 6082 T6

158824 80 8.0 6000 10.40 6082 T6

199069 80 10.0 6000 12.99 6082 T6

142219 100 6.0 6000 10.00 6082 T6

158832 100 6.0 6000 10.00 6061 T6

168281 100 10.0 6000 16.25 6082 T6

212241 100 12.0 3000 9.76 6005A T5

205927 160 10.0 6000 26.20 6005A T5

148134 160 10.0 4000 17.47 6082 T6

Structural Flat BarR W

T


Angle

Material No.

Height (mm)

Width (mm)

Thickness (mm)

R2Length (mm)


Alloy and temper

WA SA VIC NSW QLD

134516 20 12 1.6 6000 0.79 6060 T5

134517 20 12 1.6 6500 0.86 6060 T5

147967 20 20 1.6 6000 0.99 6060 T5

134519 20 20 1.6 6500 1.07 6060 T5

134523 20 20 3.0 6500 1.95 6060 T5

141593 25 20 1.6 6500 1.24 6060 T5

134525 25 25 1.6 6500 1.35 6060 T5

125995 25 25 3.0 6500 2.47 6060 T5

154037 32 20 1.6 6500 1.40 6060 T5

170644 32 32 1.6 6500 1.65 6060 T5

134537 32 32 3.0 6500 3.22 6060 T5

134539 40 20 1.6 6500 1.55 6060 T5

154041 40 20 3.0 6500 3.01 6060 T5

134545 40 25 3.0 6500 3.26 6060 T5

134549 40 40 1.5 6500 2.07 6060 T5

134549 40 40 1.6 6500 2.20 6060 T5

134553 40 40 3.0 6500 4.06 6060 T5

134555 40 40 4.0 6500 5.47 6060 T5

134557 40 40 6.0 6500 7.79 6060 T5

134559 50 25 1.6 6500 2.07 6060 T5

134563 50 25 3.0 6500 3.80 6060 T5

158725 50 50 1.6 6500 2.76 6060 T5

209420 50 50 3.0 5900 4.64 6060 T5

132715 50 50 3.0 6500 5.11 6060 T5

134569 50 50 4.0 6500 6.77 6060 T5

134571 50 50 6.0 6500 9.90 6060 T5

141604 75 25 3.0 6500 5.13 6060 T5

134585 80 40 6.0 6000 11.12 6060 T4

148025 80 80 6.0 6000 15.02 6060 T5

T

T

B

A

R2 R3

R4R1


Structural Angle

Material No.

Height (mm)

Width (mm)

Thickness (mm)

R2Length (mm)


Alloy and temper

WA SA VIC NSW QLD

224953 50 50 4.0 2.5 6000 6.26 6005a T5

209421 50 50 6.0 5900 8.98 6082 T6

205317 50 50 6.0 6500 9.93 6082 T6

141600 50 50 6.0 4.0 6500 10.00 6082 T5

142213 60 60 6.0 4.0 6500 12.05 6082 T6

208455 76.2 50.8 6.4 5500 11.59 6061 T6

142214 80 50 6.0 4.0 6500 13.16 6082 T6

148027 80 80 6.0 4.0 6000 15.40 6061 T6

142215 80 80 6.0 4.0 6500 16.33 6082 T6

154059 80 80 10.0 6.0 6000 25.02 6005a T5

169817 80 80 10.0 6.0 6500 27.11 6005a T5

141612 80 80 10.0 6.0 6500 27.11 6082 T6

148029 100 50 6.0 4.0 6000 15.28 6061 T6

141614 100 50 6.0 4.0 6500 15.28 6082 T6

141616 100 80 10.0 6500 29.95 6082 T6

198199 125 80 8.0 6.0 6000 25.66 6082 T5

T

T

B

A

R2 R3

R4R1


Channel R3R4

R2

R1

C

A

B

T1

T2

Material No.

Height (mm)

Width (mm)

T1 (mm)

T2 (mm)

RadiusLength (mm)


Alloy and temper

WA SA VIC NSW QLD

227050 20 16 1.6 1.6 6000 1.27 6060 T5

154068 20 20 1.6 1.6 6500 1.60 6060 T5

148053 25 25 1.6 1.6 6000 1.91 6063 T5

134605 25 25 3.0 3.0 6500 3.65 6060 T5

147374 40 20 3.0 3.0 6500 3.91 6060 T5

134610 40 25 3.0 3.0 6500 4.43 6060 T5

153198 41.5 22.5 3.0 3.0 3 6500 4.25 6060 T5

134616 50 25 3.0 3.0 6500 4.95 6060 T5

230205 53 25 1.2 1.2 7250 2.36 6060 T5

177216 53 25 1.6 1.6 6000 2.59 6060 T5

147375 60 32 3.0 3.0 6500 6.39 6060 T5

147873 100 50 3.0 3.0 6500 10.21 6060 T5


Structural Channel

Material No.

Height (mm)

Width (mm)

T1 (mm)

T2 (mm)

RadiusLength (mm)


Alloy and temper

WA SA VIC NSW QLD

215003 76.2 38.1 6.4 7.9 7.62 5500 15.07 6061 T6

224948 80 40 4.0 6000 9.89 6082 T6

209422 80 40 6.0 6.0 4 5900 14.31 6061 T6

142216 80 40 6.0 6.0 4 6500 15.70 6082 T6

212431 88 130 6.0 6.0 6 5900 32.05 6351 T6

172354 100 50 3.0 3.0 6000 15.57 6005a T5

216106 100 50 9.0 6.0 6 6500 26.70 6082 T6

142217 100 50 9.0 9.0 6 6500 26.70 6082 T6

210846 100 180 6.0 6.0 6900 6351 T6

227029 101.6 63.5 6.0 6.0 6500 6351 T6

134628 101.6 50.8 7.9 6.3 9.14 5500 20.65 6061 T6

224949 101.6 50.8 7.9 6.4 9.14 6000 22.53 6082 T6

199981 127 50.8 4.0 4.0 6 6500 15.81 6082 T6

204426 127 63.5 9.5 6.4 6500 28.98 6082 T6

148080 127 63.5 9.0 6.4 10.67 6500 34.25 6005a T5

204806 152.4 63.5 6.4 7.9 10.65 9000 36.42 6082 T6

158440 152.4 63.5 7.9 6.3 10.67 7000 36.46 6082 T6

224950 152.4 63.5 7.9 6.4 10.67 6000 31.25 6082 T6

200442 152.4 76.2 9.5 9.5 6000 6005a T5

141637 180 80 11.0 11.0 6 6500 47.97 6082 T6

148089 200 90 10.0 8.0 12.5 5400 46.56 6005a T5

204843 200 90 10.0 8.0 12.5 8000 68.98 6082 T6

148090 200 90 10.0 8.0 12.5 6100 52.60 6082 T6

158761 200 90 10.0 8.0 12.5 7000 60.36 6106 T6

203882 250 110 12.0 12.0 7 4000 56.54 6106 T6

175179 250 110 12.0 12.0 7 2500 35.34 6106 T6

212769 254 115 12.5 12.4 18.5 2480 37.65 6005a T5

187153 381 152.4 12.7 12.7 15.9 2500 6005a T5

175178 381 152.4 12.7 12.7 15.9 2700 6106 T6

158770 381 152.4 12.7 12.7 15.9 3000 6106 T6

R3R4

R2

R1

C

A

B

T1

T2


Solid Round Bar

Material No.Diameter

(mm)Length (mm)


Alloy and temper

WA SA VIC NSW QLD

215055 8 6000 0.82 6060 T5

133017 10 4000 0.85 6060 T5

134915 12 4000 1.22 6060 T5

142227 12 6000 1.83 6060 T6

134919 16 4000 2.17 6060 T5

141752 16 6000 3.26 6060 T5

133018 20 4000 3.40 6060 T5

134930 25.4 4000 5.48 6060 T5

DIA


Structural Solid Round Bar

Material No.Diameter

(mm)Length (mm)


Alloy and temper

WA SA VIC NSW QLD

141753 20 6500 5.53 6082 T6

198962 50 4000 21.28 6061 T6

148269 50 4000 21.28 6061 T6

DIA


Tee Bar

Material No.

A (mm)

B (mm)

T1 (mm)

T2 (mm)

R (mm)

Length (mm)

Mass per length

(kg)

Alloy and

temperWA SA VIC NSW QLD

159010 25.4 38.1 1.6 1.6 4800 1.29 6060 T5

134983 40 40 3 3 6500 4.07 6060 T5

T1

B

A

T2

R


Structural Tee Bar

Material No.

A (mm)

B (mm)

T1 (mm)

T2 (mm)

R (mm)

Length (mm)

Mass per length

(kg)

Alloy and temper

WA SA VIC NSW QLD

201499 40 40 4 4 3 6500 5.43 6005A T5

159019 40 40 4 4 3 6500 5.43 6082 T6

200962 50 50 4 4 6100 6.35 6082 T6

142228 50 50 6 6 6500 9.93 6082 T6

223061 50 65 5 6500 9.66 6082 T5

T1

B

A

T2

R


Tube

Material No.

Diameter (mm)

Wall thick (mm)

Nominal ID (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

158251 16 1.20 13.60 6500 0.98 6060 T6

140832 16 1.60 12.80 6000 1.17 6060 T5

135127 16 1.60 12.80 6500 1.27 6060 T5

212296 19 1.20 16.60 6500 1.17 6060 T5

148767 19 3.20 12.60 6500 2.86 6060 T5

207184 19.05 1.65 15.75 6500 1.58 6060 T5

135142 20 1.60 16.80 6500 1.61 6060 T5

135152 25 1.20 22.60 6000 1.46 6060 T591

135155 25 1.60 21.80 6500 2.07 6060 T5

230599 25 3.00 19.00 5900 3.29 6060 T52

135161 25 3.00 19.00 6500 3.63 6060 T5

209424 25 3.00 19.00 5900 3.29 6060 T595

142236 32 1.60 28.80 6500 2.68 6060 T5

180751 32 3.00 26.00 6500 4.79 6060 T595

148780 32 3.00 26.00 6000 4.42 6060 T5

135186 32 3.00 26.00 6500 4.79 6060 T5

141932 38.1 3.20 31.70 6000 5.84 6063 T1

209426 38.1 3.20 31.70 5900 5.74 6060 T52

159433 38 4.50 29.00 5500 7.06 6060 T591

135190 40 1.60 36.80 6500 3.40 6060 T5

230607 40 3.00 34.00 5500 5.18 6060 T52

135196 40 3.00 34.00 6500 6.12 6060 T5

180753 40 3.00 34.00 5500 5.18 6060 T595

141936 44.5 3.20 38.10 6000 6.92 6063 T591

159442 44.5 3.20 38.10 5500 6.34 6063 T52

159444 48 3.00 42.00 5500 6.47 6060 T52

230608 48 3.00 42.00 5500 6.47 6060 T52

159448 48.4 4.50 39.40 5500 9.47 6060 T52

141941 48.4 4.70 39.00 6500 11.37 6063 T591

148802 50 3.00 44.00 6500 7.79 6060 T5

A

BT


Material No.

Diameter (mm)

Wall thick (mm)

Nominal ID (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

201785 50 3.00 44.00 6500 7.79 6060 T595

141945 50 3.00 44.00 6000 7.19 6063 T1

142238 50 3.00 44.00 6500 7.79 6063 T1

135211 50 4.00 42.00 6500 10.42 6060 T1

180755 50 4.00 42.00 5500 8.82 6060 T52

214834 50 4.00 42.00 6000 9.62 6060 T591

141950 50 4.00 42.00 6500 10.42 6060 T591

206051 60 2.00 56.00 6000 5.93 6063 T1

141960 60 2.00 56.00 6500 6.42 6063 T591

180756 60 3.00 54.00 6500 9.45 6060 T595

135221 60 3.00 54.00 6500 9.45 6063 T5

141964 60 5.00 50.00 6500 15.22 6063 T591

159457 60 6.00 48.00 6500 18.36 6060 T1

141968 63.5 3.20 57.10 6000 9.86 6063 T1

229977 63.5 3.95 55.60 6000 12.02 6060 T4

193050 63.5 4.75 54.00 6000 7.13 6063 T1

159466 76.2 2.60 71.00 6500 10.74 6060 T591

141977 76.2 3.20 69.80 6500 9.70 6063 T1

206268 76.2 4.70 66.80 6500 18.60 6060 T4

141980 76.2 4.70 66.80 6000 17.17 6063 T1

209427 76 6.00 64.00 5900 48.83 6060 T1

159462 76 6.00 64.00 6500 53.80 6060 T1

135247 80 3.00 74.00 6500 12.74 6060 T595

208773 88.9 6.35 76.20 6600 29.45 6060 T4

187064 100 3.00 94.00 6500 16.04 6060 T4

230613 100 3.00 94.00 6500 16.04 6060 T52

141989 100 3.00 94.00 6500 16.04 6060 T5

180757 100 3.00 94.00 6500 16.04 6060 T595

159473 100 6.00 88.00 6000 29.52 6060 T5

180758 203.2 3.00 197.20 4200 22.01 6060 T5

Tube (continued)

A

BT


Material No.

Diameter (mm)

Wall thick (mm)

Nominal ID (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

148879 203.2 3.00 197.20 6500 34.06 6060 T5

Tube (continued)

A

BT


Material No.

Diameter (mm)

Wall thick (mm)

Nominal ID (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

148793 48.4 4.47 39.46 6000 10.03 6061 T6 (SCAF)

141939 48.4 4.47 39.46 6100 10.20 6061 T6 (SCAF)

141953 50.0 4.00 42.00 6500 10.18 6106 T6

141955 50.0 5.00 40.00 6600 12.65 6106 T6

215053 50.0 6.00 38.00 6000 13.48 6082 T5

168839 50.0 6.00 38.00 6000 13.48 6106 T6

142239 63.5 6.30 50.90 6000 18.86 6082 T6

141982 76.2 6.35 63.50 6000 23.22 6082 T6

159468 76.2 6.35 63.50 6000 23.22 6082 T6

147390 88.9 6.35 76.20 5500 25.15 6082 T6

141933 101.6 6.35 88.90 6500 34.30 6082 T6

141955 114.3 6.40 101.50 6500 39.16 6082 T6

Structural Tube

A

BT


Material No.

A and B (mm)

T (mm)

R1 (mm)

R2 (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

202177 12 1.6 6500 1.22 6060 T5

159491 20 1.2 6000 1.49 6060 T5

154068 20 1.6 6500 2.07 6060 T5

205475 20 2.0 3.00 6500 2.88 6060 T5

170226 20 3.0 3.00 6500 3.46 6060 T5

142007 20 3.0 3.00 0.50 6500 3.46 6063 T5

135271 25 1.6 6500 2.69 6060 T5

142009 25 1.5 2.50 1.00 6500 2.41 6060 T5

174939 25 2.0 1.60 0.50 6000 2.96 6060 T5

135273 25 3.0 6500 4.65 6060 T5

209428 25 3.0 3.00 3.00 5900 4.22 6060 T5

142013 25 3.0 3.00 3.00 6000 4.29 6060 T5

148895 25 3.0 3.00 3.00 6500 4.63 6060 T5

142014 25 3.0 3.00 3.00 6500 4.63 6060 T591

135277 25.4 3.3 3.18 3.18 7000 5.46 6060 T5

140219 32 2.0 6500 4.23 6060 T5

135279 32 3.0 6500 6.11 6060 T5

142033 40 1.6 6500 4.33 6060 T5

142035 40 2.0 6500 5.36 6060 T5

173924 40 2.0 3.00 1.00 6500 5.23 6060 T5

209431 40 3.0 5900 7.10 6060 T5

135287 40 3.0 6500 7.80 6060 T5

171378 40 3.0 3.00 0.50 6500 7.69 6060 T5

188175 50 1.6 6.00 4.40 6500 5.21 6060 T5

135291 50 2.0 6500 6.79 6060 T5

175606 50 2.0 6.00 4.00 6500 6.46 6063 T6

135293 50 2.5 6500 8.34 6060 T5

148911 50 3.0 6000 9.17 6060 T5

154900 50 3.0 6500 9.93 6060 T5

135297 50.8 2.0 6.00 6500 6.57 6060 T5

Square Hollow Extrusions

A

T

R1

R2

B


Material No.

A and B (mm)

T (mm)

R1 (mm)

R2 (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

148912 50.8 3.2 4.75 1.55 6000 9.76 6060 T5

135299 50.8 3.2 4.75 1.55 6500 10.57 6060 T5

229863 65 2.5 6500 11.01 6060 T5

229865 90 2.2 3.00 6500 13.35 6060 T5

230822 100 3.0 5000 16.09 6060 T5

230692 100 3.0 6000 19.31 6060 T5

142273 100 3.2 6.35 6.35 6500 21.37 6060 T5

Square Hollow Extrusions (continued)

A

T

R1

R2

B


Material No.

A and B (mm)

T (mm)

R1 (mm)

R2 (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

212668 50 3.0 6.00 3.00 6500 9.53 6082 T6

201437 50 4.0 6.00 2.00 6500 12.48 6005 T5

206864 50 5.0 6.00 1.00 6500 15.32 6005 T5

224951 50.8 3.2 4.75 1.55 6000 9.62 6082 T6

142253 50.8 3.2 4.78 1.55 6000 9.52 6106 T6

158177 65 3.0 5.00 5.00 6500 13.09 6082 T6

213563 76 6.2 16.00 9.80 6500 28.07 6082 T6

230026 76.2 3.0 6.25 3.25 6000 13.89 6082 T5

198142 76.2 3.0 6.25 3.25 12000 27.77 6082 T5

147486 76.2 6.4 15.90 9.55 6500 23.22 6082 T6

214747 100 6.0 12.00 6.00 6000 61.56 6082 T6

171386 100 6 12.00 6.00 6500 66.69 6005a T5

214791 100 6 12.00 6.00 6500 66.69 6061 T6

191652 100 6 12.00 6.00 14000 82.08 6082 T6

Structural Square Hollow Extrusions A

T

R1

R2

B


Rectangular Hollow Extrusions

Material No.

A (mm)

B (mm)

T (mm)

R1 (mm)

R2 (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

175604 38 25 1.5 3.00 1.50 6100 2.95 6060 T5

170695 38 25 2.0 3.00 1.60 6500 4.06 6060 T5

209429 38 25 2.5 3.00 5900 4.54 6060 T5

212003 40 20 2.0 2.00 5400 3.23 6060 T5

135285 40 25 2.5 6500 5.29 6060 T5

229997 40 25 3.0 6500 6.24 6060 T5

193926 50 25 1.6 6500 4.05 6060 T5

209432 50 25 3.0 5900 6.76 6060 T5

210284 50 25 3.0 3.00 6500 7.13 6060 T5

135289 50 25 3.0 6500 7.29 6060 T5

187553 50.8 25.4 2.5 1.40 6500 6.24 6060 T5

142243 50 40 3.0 6500 9.07 6060 T5

135301 60 40 3.0 6500 9.93 6060 T5

206687 60 40 4.0 6500 12.97 6060 T5

229872 65 16 1.2 3.00 1.60 6500 3.24 6060 T5

199648 65 16 1.4 6000 3.54 6060 T5

168836 65 16 1.4 3.00 1.60 6000 3.54 6060 T5

182473 65 16 1.4 3.00 1.60 6500 3.84 6063 T5

135311 76.2 25.4 2.4 6000 7.64 6060 T5

142263 76.2 25.4 2.4 6500 8.28 6060 T5

135313 76.2 50.8 3.2 6500 13.78 6060 T5

222919 80 25 3.0 6500 10.33 6060 T5

135317 80 40 3.0 6500 12.01 6060 T5

133517 80 50 3.0 6500 13.10 6060 T5

135320 100 25 2.5 6500 10.53 6060 T5

209433 100 50 3.0 5900 13.76 6060 T5

135324 100 50 3.0 6500 15.16 6060 T5

223058 100 50 3.0 6500 15.16 6060 T591

181287 100 50 3.0 6.00 6500 14.76 6060 T5

A

B

T2

R2

R1

T1


Material No.

A (mm)

B (mm)

T (mm)

R1 (mm)

R2 (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

135331 150 50 3.0 6500 20.43 6060 T5

159509 152.4 76.2 6.4 1.60 0.25 6000 44.38 6060 T595

230821 200 50 3.0 4000 15.87 6060 T5

230820 200 50 3.0 5000 19.84 6060 T5

230819 200 50 3.0 6000 23.80 6060 T5

230711 200 50 3.0 7000 27.77 6060 T5

Rectangular Hollow Extrusions (continued)

A

B

T2

R2

R1

T1


Structural Rectangular Hollow Extrusions

Material No.

A (mm)

B (mm)

T (mm)

R1 (mm)

R2 (mm)

Length (mm)


Alloy and temper

WA SA VIC NSW QLD

203814 40 20 3 5000 4.38 6005a T5

195520 75 50 4 2.00 2.00 7500 18.61 6005a T5

142269 100 50 3 6.00 3.00 6500 15.54 6082 T6

216107 100 50 6 8.00 2.00 6500 28.26 6082 T6

142271 100 50 6 8.00 2.00 7500 33.32 6082 T6

224952 100 60 4 4.00 4.00 6000 19.77 6082 T6

172957 101.6 76.2 2.3 5.48 3.18 11800 24.73 6082 T6

201027 150 100 6 6.00 6.00 6500 50.31 6082 T5

147395 152 76 6 6.00 2.00 6500 49.21 6082 T6

223062 200 50 3 6.00 3.00 6500 25.79 6061 T5

A

B

T2

R2

R1

T1


Marine Extrusions

Material No.

Section (mm)

Dimensions (H x W) (mm)

Length (mm)

Mass per length

(kg)

Alloy and temper

WA SA VIC NSW QLD

147901 Windscreen mould 19.06 x 11.28 5000 1.370 6060 T1

147901 Windscreen mould 19.06 x 11.28 6500 1.780 6060 T1

216266 4.2mm Chine 22 x 31 6000 5.178 6063 T5

157828 3.2mm Keel 35 x 27.26 4400 5.500 6063 T5

212852 3.2mm Gunwhale 43 x 54 5000 7.200 6063 T5

230227 3.2mm Chine 35 x 22 4500 4.469 6063 T5

210283 50mm Half Round 30 x 50 6500 5.076 6005A T5

202366 50mm Coaming - Facia 16 x 50 6500 3.800 6063 T591

190776 76.2 mm Bulb Bar 19 x 76.2 6000 8.508 6082 T6

190777 98.7 mm Bulb Bar 19.05 x 98.7 6000 10.530 6082 T6

189653 50 mm Bulb Bar 14 x 50 6000 4.692 6082 T6

141731 39mm Half Round 24.5 x 39 6500 3.803 6005A T5

230230 5.2mm Keel 45 x 40 6200 14.421 6063 T5

230231 5.2mm Keel 45 x 40 7000 16.282 6063 T5

230229 4.25mm / 5.25mm Chine 48 x 22 6000 7.284 6063 T5

230221 4.25mm Gunwhale 43 x 54 6500 9.405 6063 T5

230236 50mm Coaming - Facia 16 x 50 6500 3.471 6063 T5

230232 90mm Flat Coaming - Facia 16 x 90 4600 4.613 6063 T5



141689 1 Slot Recessed Coaming - Facia 16 x 50 6500 5.584 6063 T591

141742 47mm Recessed Gunwhale 32 x 47 6500 5.408 6060 T591

141691 2 Slot Recessed Coaming - Facia 16 x 80 6500 7.092 6063 T591

153634 63mm Recessed Gunwhale 32 x 63 6500 9.419 6063 T591

205371 63.5mm Top Hat 31.75 x 63.5 4867 4.614 6060 T591

230461 Transom Double Channel RE 40 x 100 6500 11.147 6063 T5

See next page for images.

Refer to material no.

* Please check with your local BlueScope branch for section availability


230221 212852

230229 230227216266

230230 / 230231157828

Marine Extrusions (continued)


190776

190777

189653

230461

141731 210283



230232 / 230233

230236

230235

202366

147901




20537163.5MM TOP HAT

15363463MM RECESSED GUNWHALE

1416912 SLOT RECESSED COAMING - FACIA

14174247MM RECESSED GUNWHALE

1416891 SLOT RECESSED COAMING - FACIA


Transport Extrusions

Material No.

Section (mm)


Length (mm)


Alloy and temper

WA SA VIC NSW QLD

214703 Small bottom corner 192 x 200 11000 70.84 6005a T5

214704 Corner post 82 x 100 6500 51.78 6005a T5

212770 Small top rail 114 x 216 11000 82.98 6005a T5

227571 Splashguard 157 x 251 11000 50.82 6106 T6

169929 Tautliner Track 42 x 75 6000 12.39 6106 T6

134771 Tautliner Track 42 x 75 15.74 6106 T6

194218 Tautliner Track 42 x 75 8500 17.56 6106 T6

210147 Main Beam 232.6 x 152.4 11000 153.13 6005a T5

212582 One Piece Beam 150 x 384 9750 177.23 6005a T5

212583 One Piece Beam 150 x 384 11000 199.95 6005a T5

177671 Beam Base 41.5 x 100 11000 73.35 6005a T5

210150 Tarp Roller Tube 53 x 53 10400 17.75 6060 T5

215584 Tarp Roller Tube 53 x 53 11500 19.63 6060 T5

210149 101.6 Lip Channel 101.6 x 76.2 6000 29.09 6061 T6

204995 Axle Block 56 x 56 2000 7.07 6063 T5

210153 Tailgate 54.93 x 142.10 2240 9.86 6106 T6

214887 Rear Pillar 75 x 143 6000 52.90 6005a T5

170376 Coaming Top Tailgate 216 x 114 5000 37.62 6005a T5

154266 Inner Coaming 140 x 167 11000 79.00 6005a T5

199858 Inner Coaming 140 x 167 12800 91.93 6005a T5

148422 Rear Pillar 75 x 122 6500 49.67 6005a T5

227378 Bullbar Spotlight Bracket 36 x 88 6000 17.59 6060 T5

216027 I Beam 203 x 101.6 x 8 x 11 203 x 101.6 9600 98.52 6082 T6

216028 I Beam 220 x 100 x 5 x 10 220 x 100 78.12 6082 T6

230042 I Beam 270 x 100 x 6 x 10 270 x 100 9600 91.23 6082 T6

179224 Top Coaming 169 x 83 8500 46.71 6005a T5

154273 Top Coaming 169 x 83 60.28 6005a T5

199859 Top Coaming 169 x 83 12800 70.32 6005a T5





Material No.

Section (mm)


Length (mm)


Alloy and temper

WA SA VIC NSW QLD

212829 Large Top Coaming 232 x 140 11000 116.69 6005a T5

193796 Bottom Coaming 294 x 230 5000 52.24 6005a T5


179222 Bottom Coaming 294 x 230 91.03 6005a T5


207026 Ute - Dropside 250 x 40 1860 4.32 6063 T5

197905 Ute - Dropside 250 x 40 5.57 6063 T5

197906 Ute - Dropside 250 x 40 3000 6.97 6063 T5

208665 Ute - Front Coaming 70 x 92 3725 4.32 6063 T5

197911 Ute - Headboard 35 x 100 3000 5.39 6063 T5

197909 Ute - Large Floorplank 176 x 30 2000 3.47 6063 T5

198529 Ute - Large Floorplank 176 x 30 2500 4.34 6063 T5

208666 Ute - Rear Coaming 79 x 50 3725 4.91 6063 T5

197901 Ute - Rope Rail 115 x 30 6500 15.80 6063 T5

197902 Ute - Side Coaming 79 x 30 4920 5.99 6063 T5

Transport Extrusions (continued)





208666

197911

197902

208665

212770



210153

169929

177671



210147



210149

197901

214887



197909

207026

210150

204995




214703BOTTOM CORNER

214704TIPER BODY CORNER POST

227378BULLBAR SPOTLIGHT BRACKET

212582ONE PIECE BEAM

216027



170376COAMING TOP TAILGATE



212829LARGE TOP COAMING



148422

193796BOTTOM COAMING



154266INNER COAMING



179224TOP COAMING



227571SPLASHGUARD


Material No.

Section (mm)

Dimensions (mm)

RE (y/n)

PunchingHole size (mm)

Hole spacings

(mm)

Length (mm)

Mass per

length (kg)

Alloy and

TemperWA SA VIC NSW QLD

231486 Tube 16 x 1.2 1190 0.18 6060 T5

158251 Tube 16 x 1.2 6500 0.98 6060 T5

231487 Tube 16 x 1.6 1190 0.23 6060 T5

135127 Tube 16 x 1.6 6500 1.27 6060 T5

202178 Tube 19 x 1.6 6500 1.45 6060 T5

231489 Rectangular Box 38 x 25 x 1.5 Single 16.5 100 3000 1.42 6060 T5

231497 Rectangular Box 38 x 25 x 1.5 Double 16.5 100 3000 1.42 6060 T5











231508 Rectangular Box 38 x 25 x 1.5 6100 2.88 6060 T5



142033 Box 40 x 40 x 1.6 6500 4.34 6060 T5

135287 Box 40 x 40 x 3.0 6500 7.82 6060 T5

148908 Box 50 x 50 x 1.6 6500 5.45 6060 T5

154900 Box 50 x 50 x 3.0 6500 9.93 6060 T5

231510 Box 50 x 50 x 1.6 1800 1.69 6060 T5

231511 Box 50 x 50 x 1.6 2100 1.97 6060 T5

231512 Box 50 x 50 x 1.6 6500 6.10 6060 T5

Fencing Extrusions





Material No.

Section (mm)

Dimensions (mm)

RE (y/n)

PunchingHole size (mm)

Hole spacings

(mm)

Length (mm)

Mass per

length (kg)

Alloy and

TemperWA SA VIC NSW QLD

231515 Box 50 x 50 x 1.8 1800 1.68 6060 T5

231516 Box 50 x 50 x 1.8 2100 1.96 6060 T5

231513 Box 50 x 50 x 1.8 6500 6.07 6060 T5

229863 Box 65 x 65 x 2.5 6500 11.01 6060 T5

135324 Box 100 x 50 x 3.0 6500 15.22 6060 T5

231522 Slat Section 50 x 10 x 1.2 6500 2.42 6060 T5

229872 Slat Section 65 x 16 x 1.2 6500 3.31 6060 T5

182473 Slat Section 65 x 16 x 1.4 6500 3.76 6060 T5

231523 Slat Section 76 x 16 x 1.2 6500 3.77 6060 T5

231521 Slat Section 100 x 16 x 1.4 6500 5.81 6060 T5

Fencing Extrusions (continued)





231522Slat Section

231521Slat Section

231523Slat Section

Fencing Extrusions (continued)


Balustrade Extrusions

Material No.

Section (mm)


Length (mm)


Alloy and temper

WA SA VIC NSW QLD

181286 Infill Clip to suit SQ post 12.6 x 21.92 5600 0.97 6106 T6

181283 50mm SQ - 1 way glazing post 50 x 50 5600 10.47 6106 T6

181284 50mm SQ - 2 way glazing post 180deg 50 x 50 5600 12.24 6106 T6

193726 50mm SQ - 2 way glazing post 90deg 50 x 50 5600 9.29 6106 T6

183095 50mm RND - 3 way glazing post 50 x 50 5600 8.79 6005A T5

183059 50mm RND - 1 way glazing post 50 x 50 5600 8.75 6005A T5

208984 50mm RND - 2 way glazing post 45deg 50 x 50 5600 8.84 6106 T6

183060 50mm RND - 2 way glazing post 180deg 50 x 50 5600 9.76 6106 T6

183091 50mm RND - 2 way glazing post 90deg 50 x 50 5600 8.96 6005A T5

183094 Infill Clip to suit RND post 15.28 x 21.92 5600 1.23 6005A T5

210334 50mm SQ - 1 way slat post 50 x 70 6100 6.95 6005A T5

210335 50mm SQ - 2 way slat post - 180deg 50 x 90 6100 7.83 6005A T5

210336 50mm SQ - 2 way slat post - 90deg 70 x 70 6100 7.83 6005A T5

180901 38mm Oval Baluster 19.05 x 38 6500 3.16 6060 T6

231528 70 x 39.5 Flat bottom Oval Handrail 39.5 x 70 6500 5.40 6060 T5

231538 70 x 39.5 Flat bottom Oval Glazing 39.5 x 70 6500 6.97 6060 T5

231592 Infil clip to suit Oval Glazing 16.67 x 27.6 6500 1.64 6060 T5

231583 Ladies Waist Handrail 60 x 74 6500 7.87 6060 T5

231588 60mm Round Glazing Handrail 60 x 60 6500 7.88 6060 T5

231594 Infill clip to suite 60mm Round Glazing 19.8 x 18.8 6500 1.30 6060 T5

231596 Sliding Gate Rail 50.8 x 83.3 6500 12.32 6060 T5

231615 Gate Track 20 x 80 6500 8.24 6060 T5

231617 40 x 40 Screen Frame 40 x 40 6500 6.60 6060 T5





Balustrade Extrusions (continued)

181286

181283 181284 193726

231592

183094231594



231528

231538

231588

18309550MM RND - 3 WAY GLAZING POST



210334

210335

210336

231596

231615


231617

183059 183060 183091

208984

180901

231583



Louvre Extrusions

Material No.

Section (mm)


Length (mm)


Alloy and temper

WA SA VIC NSW QLD

231619 50mm Elliptical Blade 10 x 50 6500 2.38 6060 T5







231674 90mm Elliptical Blade Bracket 14 x 85 6500 7.93 6060 T5



231677 50mm Ventilation Blade 51 x 38.6 6500 2.54 6060 T5

231678 100mm Ventilation Blade 100 x 75 6500 5.69 6060 T5

231679 133mm Ventilation Blade 133 x 97 6500 7.33 6060 T5

231680 60 x 20 Suncreen Blade 10 x 60 6500 2.61 6060 T5

231681 80 x 20 Suncreeen Blade 10 x 80 6500 3.61 6060 T5





Louvre Extrusions (continued)

231619

231621

231620

231677

231680

231681



231678

231679



231622231623231624231625



231674

231675

231676


Signage Extrusions

Material No.

Section (mm)


Length (mm)


Alloy and temper

WA SA VIC NSW QLD

154216 25mm Backing Rail 25.5 x 28.5 6500 2.38 6060 T5

227323 25mm HVY Backing Rail 25.5 x 28.5 800 0.54 6060 T5




231683 Type 2A Backing Rail 40 x 44 6500 8.54 6060 T5

231684 133.3mm Sign Frame 16.2 x 133.3 6500 6.68 6060 T5

231685 150mm Sign Frame 20 x 150 6500 7.78 6060 T5

197301 168mm Sign Frame 26 x 168 6500 11.88 6060 T5

231686 180.4mm Sign Frame 17 x 180.4 6500 9.30 6060 T5

231687 200mm Sign Frame 21 x 200 6500 15.39 6060 T5

231700 Male Sign Bracket 30 x 107.22 6500 7.82 6060 T5

231701 Female Sign Bracket 30 x 104.82 6500 7.44 6060 T5

231702 200mm Sign Blade 12.7 x 200.03 6500 11.52 6060 T5

231703 200mm HVY Sign Blade 15.88 x 203.2 6500 16.61 6060 T5





Signage Extrusions (continued)

154216 231683227323

231684


197301231687 231685231686



231700 231701

231702 231703



Coolroom Extrusions

Material No.

Section (mm)


FinishLength (mm)


Alloy and temper

WA SA VIC NSW QLD

231704 35mm Coving 35 x 35 various 6500 1.51 6060 T5

231705 50mm Coving 50 x 50 various 6500 2.92 6060 T5

231706 55.8 x 30 Base Channel 30 x 55.8 various 6500 3.29 6060 T5

231707 81 x 38 Base Channel 38 x 81 various 6500 4.36 6060 T5



231710 157.36 x 37.95 Base Channel 37.95 x 157.36 various 6500 8.44 6060 T5

231711 53.2 x 25 Channel 25 x 53.2 various 6500 2.12 6060 T5

231712 76 x 38 Channel 38 x 76 various 6500 3.94 6060 T5

231713 106 x 40 Channel 40 x 106 various 6500 9.37 6060 T5

231714 168.3 x 25.4 Channel 25.4 x 168.3 various 6500 10.65 6060 T5

231715 70 x 40 Angle 40 x 70 various 6500 2.87 6060 T5

231716 150 x 25.4 Angle 25.4 x 150 various 6500 9.04 6060 T5

231717 58mm Door Jam 55 x 58 various 6500 4.64 6060 T5

231718 70mm Door Handle 70 x 87 various 6500 11.69 6060 T5

231719 50mm Door Track 50 x 90 various 6500 10.54 6060 T5

231720 Large Door Track 40 x 150 various 6500 19.16 6060 T5

231721 Sliding Door Base 50 x 90 various 6500 10.54 6060 T5





Coolroom Extrusions (continued)

231719

231718

231704 231705



231711

231706

231717

231721SLIDING DOOR BASE



231720

231716

231715


Material No.Thickness

(mm)Width (mm)

Length (mm)

Mass per sheet (kg)

WA SA VIC NSW QLD

105683 0.6 1200 2400 4.68

105683 0.8 1200 2400 6.22

126142 1.0 1200 2400 7.78

126141 1.0* 1200 2400 7.78

126150 1.2 1200 2400 9.33

131022 1.2* 1200 2400 9.33

142327 1.2 1200 3000 11.66

126156 1.6 1200 1800 9.33

110711 1.6 1200 2400 12.44

126153 1.6* 1200 2400 12.44

130788 1.6 1200 3000 15.55

126157 1.6 1500 2400 15.61

126158 1.6 1500 3000 19.51

142330 1.6 1500 3600 23.41

131354 2.0 1200 1800 11.66

110712 2.0 1200 2400 15.55

126163 2.0* 1200 2400 15.55

140528 2.0 1200 3600 23.33

126166 2.0 1500 2400 19.51

132621 2.0 1500 3000 24.39

133022 2.0 1500 3600 29.27

126172 2.5 1200 2400 19.29

126169 2.5* 1200 2400 19.29

126173 2.5 1500 2400 24.11

159615 2.5 1500 3000 30.14

110713 3.0 1200 2400 23.33

126184 3.0* 1200 2400 23.33

142345 3.0 1200 3000 29.27

128241 3.0 1200 3600 34.99

Sheet 5005 H34

* Denotes PVC



(mm)Width (mm)

Length (mm)

Mass per sheet (kg)

WA SA VIC NSW QLD

130716 3.0 1500 3000 36.45

126189 3.0 1500 2400 29.16

130716 3.0 1500 3000 36.45

159636 3.0* 1500 3000 36.45

142347 3.0 1500 3600 43.74

115035 4.0 1200 2400 31.10

140883 4.0 1500 3000 48.78

108808 5.0 1200 2400 38.88

204448 5.0 1500 3000 60.98

173646 5.0* 1200 2400 38.88

115036 6.0 1200 2400 46.66

215887 6.0 1500 3000 73.17

Sheet 5005 H34 (continued)

* Denotes PVC



(mm)Width (mm)

Length (mm)

Mass per sheet (kg)

WA SA VIC NSW QLD

126160 1.6 1200 2400 12.49

131674 2.0 1200 2400 15.55

142335 2.0 1200 6000 39.02

191248 2.0 1500 3600 29.27

126180 2.5 1200 2400 19.29

147240 2.5 1200 6000 48.78

187442 2.5 1500 3600 40.98

142337 2.5 1500 6000 68.29

205672 3.0 1020 4700 38.98

205673 3.0 1020 5100 42.30

132454 3.0 1200 2400 23.24

127751 3.0* 1200 2400 23.24

140532 3.0 1200 6000 58.54

149025 3.0 1500 3000 36.59

159652 3.0 1500 6000 73.18

194723 3.0 1525 6000 74.40

140536 4.0 1200 2400 31.22

200458 4.0 1200 6100 79.35

Sheet 5052 / 5251 H32

* Denotes PVC



(mm)Width (mm)

Length (mm)

Mass per sheet (kg)

WA SA VIC NSW QLD

194029 1.55 750 3000 9.45

194030 1.55 900 3600 13.61

194083 1.55 1200 2400 12.10

227644 1.55 (LIN80) 1200 2400 12.10

227645 1.55 (LIN80) 1200 3000 15.12

227646 1.55 (LIN80) 1200 3600 18.14

163243 1.60 1200 2400 12.49

173203 1.6 (LIN DS) 750 3000 9.45

227647 1.95 (LIN80) 750 3000 11.89

227648 1.95 (LIN80) 900 2100 9.99

227649 1.95 (LIN80) 1200 2400 15.22

Sheet 5052 / 5251 H38



(mm)Width (mm)

Length (mm)

Mass per sheet (kg)

WA SA VIC NSW QLD

142352 3.0 1200 2400 22.98

142353 3.0 1200 6100 59.51

142354 3.0 1525 6100 74.23

159652 3.0 2200 9000 160.97

162713 4.0 1200 2400 30.64

142363 4.0 1200 6100 77.89

172158 4.0 1525 6100 100.84

142368 4.0 1830 6100 121.01

170530 4.0 2200 9000 210.67

154980 5.0 1200 2400 38.30

142380 5.0 1200 6100 99.19

140546 5.0 1525 6100 126.05

154999 5.0 1830 6100 151.26

170551 5.0 2200 9000 263.34

199300 5.0 2200 10300 301.38

135342 6.0 1200 2400 45.97

142290 6.0 1200 6100 119.02

142291 6.0 1525 6100 151.26

142292 6.0 1830 6100 178.16

148939 6.0 1980 6100 196.39

200649 6.0 1980 11800 379.90

159514 6.0 2200 9000 316.01

142300 8.0 1200 2400 61.29

207452 8.0 1200 3000 76.61

142301 8.0 1830 6100 242.01

194304 8.0 1830 9000 357.06

148961 8.0 1980 6100 261.85

172268 8.0 2200 9000 421.34

142304 10.0 1200 2400 76.61

142305 10.0 1200 6000 218.89

Sheet & plate 5083 DNV H116



(mm)Width (mm)

Length (mm)

Mass per sheet (kg)

WA SA VIC NSW QLD

162870 10.0 1830 6100 302.52

142311 12.0 1200 2400 91.93

159538 12.0 1200 6100 238.05

142314 16.0 1200 2400 124.88

154944 16.0 1200 6100 317.40

142318 20.0 1200 2400 156.10

158210 20.0 1200 6100 396.75

142320 25.0 1200 2400 195.12

Sheet & plate 5083 DNV H116 (continued)



(mm)Width (mm)

Length (mm)

Mass per sheet (kg)

Alloy Temper WA SA VIC NSW QLD

149099 1.6* 1219 2438 13.82 3003 H22

135418 1.6 1200 2400 14.40 5052 O

135420 2.0 1200 2400 17.86 5052 O

135424 2.5 1200 2400 22.18 5052 O

149108 3.0* 1219 2438 26.15 3003 H22

135428 3.0 1200 2400 25.34 5052 O

142386 3.0 1200 3600 38.02 5052 O

149111 3.0 1200 6000 63.37 5052 O

155027 3.0 1525 3658 49.10 5052 O

215395 4.0 1200 2400 33.98 5052 O

135432 4.0 1200 6000 84.96 5052 O

149115 5.0* 1218 2438 43.94 3002 H22

135435 5.0 1200 2400 42.62 5052 O

142387 5.0 1200 3600 63.94 5052 O

135440 6.0 1200 2400 49.82 5052 O

142388 6.0 1200 3600 74.74 5052 O

Treadplate 5BAR

* Denotes propellor bright

5BAR Propellor Bright


Painted Sheet & CoilAluminium coils are painted at the paint line at Erskine Park in NSW. This is where COLORBOND® steel, the flagship product of BlueScope is also painted. Painted aluminium, backed up by BlueScope painting technology, is the ultimate solution for challenging building environments. Other applications include wine tanks, air condition panels and caravan panels.

THICKNESS RANGE *0.55mm to 1.6mm

WIDTH RANGE *940mm to 1260mm

* refer to BlueScope for sizes outside the range

PAINT TYPEPolyester / Fluorocarbon / Flurocarbon Pearlescent

PAINT COLOURFull Range of BlueScope Colours and Custom Colour Match

PROTECTIONCan Apply Polyethylene Film on Top Colour, if required

BRANDINGCan Print Brand on the Reverse Side of the Coil

MINIMUM ORDER QUANTITYOne Aluminium Coil ( ~ 4t). The coil can be painted in two colours, if required.

While every attempt has been made to ensure the correctness and currency of information shown in this aluminium catalogue, as of the publication date BlueScope Sheet Metal Supplies, BlueScope Plate Supplies and BlueScope Distribution accepts no responsibility for any errors in the catalogue nor any information that may have been omitted from the catalogue.

As new information becomes available, every attempt will be made to maintain the currency of the catalogue. If there are any further requirements for information on aluminium alloys, wrought products and final product applications that are not covered in the catalogue then readers are encouraged to contact their regional Distribution office for assistance.

The information in this catalogue is provided for your convenience only. You are responsible for selecting, presenting and checking that the designs you provide/specify or the product you select (including any applicable treatments and finishes) meet your needs and will be fit for the application in which you intend to use the end products. BlueScope Sheet Metal Supplies, BlueScope Plate Supplies and BlueScope Distribution accepts no responsibility for any damage or loss you or any other person suffers or any liability flowing from your use of or reliance on the information in this publication. To the maximum extent permitted by law, BlueScope Sheet Metal Supplies, BlueScope Plate Supplies and BlueScope Distribution cannot by law be excluded, limits its liability to re-providing the information contained in this catalogue or (at its option) replacing the relevant products.

DISCLAIMER

Bluescope Aluminium Catalogue - Edition 1

Documents

Transcript of Bluescope Aluminium Catalogue - Edition 1