C.A.M.E.L. Loading software
-
Upload
argonautika-mds -
Category
Documents
-
view
218 -
download
3
description
Transcript of C.A.M.E.L. Loading software
C.A.M.E.L. © v1.5.00 - 1997-2013
Computerized Advanced Marine Engineering Loading
“C.A.M.E.L .” Loading computer was development
in 1997 and since then it has versioned up its functions and features constantly. Our general software has been approved by main leading Classification Societies and until now, a good many vessels have been equipped with “C.A.M.E.L.” program.
“C.AM.E.L. “ enables you to verify promptly its Intact and Damage stability, Longitudinal Strength and many other functions with visible window information about the results for the current loading condition. Our software covers all types of vessel: Bulk Carriers, Tankers, General Cargo, Containers, LPG, Passengers/Ro-Ro, Cable vessel, Yachts .
One screen covers the entire program
LPG
Bulk Carrier
Tanker
Container
Timber
Yacht
-Hydrostatic information table(Draft,trim,LCB…)
-Intact Stability information table-IMO Criteria
-Weather Criteria information table
-Longitudinal Strength calculation table(S.F., B.M)
-Summary of cargoes information table
-Forward draft limit
-Calculation of Propeller immersion
-Load Line selection(Summer,Winter,Tropical…)
-Restrictions(Draft,Trim,S.F.,B.M., Air Draft)
-Automatic unit conversion(Metric-British)
-Water density calculation
-Cover all cargo types(Bulk,Grain,General
Cargo,Timber)
-Various unit selection for density/stowage of cargo
One screen covers the entire programStandards functions for Bulk Carrier
BULK CARRIER
C.A.M.E.L. © v1.5.00 - 1997-2013
Computerized Advanced Marine Engineering Loading
-Various unit selection for density/stowage of cargo
-Actual loading graph of the vessel
-Longitudinal strength in flooded condition(URS17)
-Max. and Min. required cargo mass(URS1)
-Shear force correction according to CSR or
Classification
-On line help and error/warning messages
-Explorer to manage loading conditions(copy,paste,
recycle bin, directories….)
-Import-Export loading conditions
- Reporting facilities(Print out tables and graphs)
Optional utilities for Bulk Carrier
-Loading/Unloading sequence module
-Ballast Water Management module
-Display and printout Draft Survey Report
-Calculation and printout NCB form for Grain
-Calculation and printout Canadian form
-Auto-loading module
-Auto-trim module
-Air Draft calculation
-Damage Stability Calculation
-Grounding/ Refloating calculation
Loading/Unloading sequence module
C.A.M.E.L. © v1.5.00 - 1997-2013
Computerized Advanced Marine Engineering Loading
-Hydrostatic information table(Draft,trim,LCB…)
-Intact Stability information table-IMO Criteria
-Weather Criteria information table
-Longitudinal Strength calculation table(S.F., B.M)
-Summary of cargoes information table
-Forward draft limit
-Calculation of Propeller immersion
-Load Line selection(Summer,Winter,Tropical…)
-Restrictions(Draft,Trim,S.F.,B.M., Air Draft)
-Automatic unit conversion(Metric-British)
-Water density calculation
-Cover all cargo types(Product, Crude, Chemical)
One screen covers the entire programStandards functions for Tanker-Chemical
TANKERS-CHEMICAL CARRIERS
-Various unit selection for density of cargo
-Actual loading graph of the vessel
-ASTM/IP Convention Tables
-Automatic correction of density according to
-loading/unloading temperature
-On line help and error/warning messages
-Explorer to manage loading conditions(copy,
paste, recycle bin, directories….)
-Import-Export loading conditions
- Reporting facilities(Print out tables and graphs)
Optional utilities for Tanker-Chemical-Ballast Water Management module
-Display and printout Draft Survey Report
-Auto-Trim module
-After Loading/Before Discharging calculations
Ullage Report
-Damage Stability Calculation – Direct damage
assessments
-Damage Stability Calculation- Automatic assessment for
each loading condition using pre-programmed damage
cases according to approved damage stability booklet
-Grounding/ Refloating calculation
Ullage/Sount Report
C.A.M.E.L. © v1.5.00 - 1997-2013
Computerized Advanced Marine Engineering Loading
-Hydrostatic information table(Draft,trim,LCB…)
-Intact Stability information table-IMO Criteria
-Weather Criteria information table
-Longitudinal Strength calculation table(S.F., B.M)
-Summary of cargoes information table
-Forward draft limit
-Calculation of Propeller immersion
-Load Line selection(Summer,Winter,Tropical…)
-Restrictions(Draft,Trim,S.F.,B.M., Air Draft)
-Automatic unit conversion(Metric-British)
-Water density calculation
-Various unit selection for density of cargo
-Actual loading graph of the vessel
One screen covers the entire programStandards functions for container
CONTAINER
-Actual loading graph of the vessel
-On line help and error/warning messages
-Explorer to manage loading conditions(copy,paste,
recycle bin, directories….)
-Import-Export loading conditions
-Reporting facilities(Print out tables and graphs)
-Container View -Bays View
-Mode 20/40 or other type
-Pre-planning /loading/discharging/change
-Ports-Owners-Shippers/Receivers/Route
-Cargo info: in bay/in tier
-Sum info: in bay/in tier
-Facilities:
Check container’s ID
Search
Check undefined ports
Optional utilities for Container
-Ballast Water Management module
-Display and printout Draft Survey Report
-Auto-Trim module(for ballast-bunkers)
-Damage Stability Calculation
-Grounding/ Refloating calculation
Summary view
C.A.M.E.L. © v1.5.00 - 1997-2013
Computerized Advanced Marine Engineering Loading
-Hydrostatic information table(Draft,trim,LCB…)
-Intact Stability information table-IMO Criteria
-Weather Criteria information table
-Longitudinal Strength calculation table(S.F., B.M)
-Summary of cargoes information table
-Forward draft limit
-Calculation of Propeller immersion
-Load Line selection(Summer,Winter,Tropical…)
-Restrictions(Draft,Trim,S.F.,B.M., Air Draft)
-Automatic unit conversion(Metric-British)
-Water density calculation
One screen covers the entire programStandards functions for Multi purpose
Multi-purpose
-Water density calculation
-Various unit selection for density of cargo
-Actual loading graph of the vessel
-On line help and error/warning messages
-Explorer to manage loading conditions(copy,paste,
recycle bin, directories….)
-Import-Export loading conditions
-Reporting facilities(Print out tables and graphs)
-Cover all types of cargo simultaneously. (Drycargo,
Grain, General Cargo, Timber, Container)
Optional utilities for Multi-purpose
-Ballast Water Management module
-Display and printout Draft Survey Report
-Auto-Trim module(for ballast-bunkers)
-Damage Stability Calculation
-Grounding/ Refloating calculation
-Timber Loading Module
-General Cargo on deck Module
Summary view