Calculating Sedimentation Loads from Unpaved/Logging Roads · Simple Method • Planning tool •...
Transcript of Calculating Sedimentation Loads from Unpaved/Logging Roads · Simple Method • Planning tool •...
Calculating Sedimentation Loads from Unpaved/Logging Roads
Tom BallesteroUniversity of New Hampshire
1 May 2013
1
Fundamental Causes of Erosion
• Climate• Land Use• Soil Type• Land Cover• Topography• Groundwater• Surface water
2
Climate
• Wind• Precipitation• Waves• Glaciers• Freeze/thaw
3
Land Use• Grazing• Construction• Deforestation/logging• Forested• Urban
4
Soil Type
• For gravel roads, this is going to be gravel
• Most erodible materials are fine sands to silts
5
Land Cover
• Vegetation• Pavement• Bare soil
6
Topography
• Slope (gravity)• Slope length
7
Groundwater
• Submerged soils have less ability to resist erosion (soil strength)
• Groundwater places a pressure on the soil against gravity
8
Surface Water• Velocity• Depth of flow
– Sheet flow– Shallow
concentrated– Rills– Gullies
9
Shear stress related todepth times slope
Fundamentally• Sediment is available• Something can move the sediment
10
Erosion Control
• Minimize sediment available to move (protect) –prevent erosion
• Eliminate what moves the sediment (drain)
11
After Erosion Occurred
• Now in management mode – how best to remove the sediment before it gets to the receiving water?
12
13
Reid and Dunne, 1984
Methods to Estimate Erosion on Unpaved Roads
14
Universal Soil Loss Equation (USDA)
• Developed from erosion plot and rainfall simulator experiments
• Sheet and rill erosion
15
USLE
A = R x K x LS x C x P = RKLSCP• A = long‐term average annual soil loss [ton/(acre/year)]
• R = rainfall erosivity factor [hundreds of ft.tonsf.in/acre.hr.year]
• K = the soil erodibility factor [tons per acre per unit R]
• L and S = topographic factors [‐]• C and P = the cropping management factors [‐]
16
17
18
19
20
Road Gravel Particle Sizes
21
• 38 mm
• 19 mm
• 4.75 mm• 2 mm• 0.075 mm
22
23
24
25
26
LS Values for Freshly Prepared Construction and other Highly DisturbedSoil, with Little, or no Cover (Renard, et al. 1987)
27
28
29
30
Wait, There’s More!
• MUSLE• RUSLE
31
I don’t always compute soil loss, but when I do I start with
the USLE
Stay uneroded my friend
Water Erosion Prediction Project (USDA)
• Process based erosion model that can be used to simulate low volume road erosion
• Database of erosion estimates for 72,900 different road configurations, locations, and soil types
• Database was then used to derive equations for low volume road erosion and runoff (+/‐ 20%)
32
WEPP Road Soil Loss
33
Equation Reference Table 3
34
Equation Reference Table 4
35
WEPP Predictive Power
36
WEPP Reference
37
38Imhoff, et al, 2010
39Imhoff, et al, 2010
SEDMODL (WEPP with GIS)GIS‐based road erosion and delivery model designed to identify road segments with high potential for delivering sediment to streams. The model uses an elevation grid combined with road and stream information layers to produce what is essentially a computer‐generated version of the Washington surface road erosion model. It estimates background sediment, generation of sediment for individual road segments, finds road/stream intersections, and estimates delivery of road sediment to streams.
http://www.ncasi.org/support/downloads/Detail.aspx?id=5
40
41
Effects of Grading
42
43
44
Tread (Road) Sediment Delivery
45
Geologic Factor
46
Road Tread Surfacing Factor
47
Road Width and Traffic Factors (1)
48
Road Width and Traffic Factors (2)
49
Road Slope Factor
50
Cut Slope Sediment Delivery
51
Cut Slope Height
52
Data Base for Cut Slope Height
53
Cut Slope Cover Factor
54
Rainfall Factor
55
Road Delivery Factor
56
Road Age Factor
57
Segment Length/Road Drainage Configuration
58
Segment Lengths Used for Each Configuration
59
Spreadsheet Tool for Estimating Pollutant Load (STEPL)
• Region 5 Model
• http://it.tetratech‐ffx.com/steplweb/
• Spreadsheet model based on the USLE
60
Simple Method
• Planning tool• Assess different best management practices at the watershed and subwatershed scale
• estimates contaminant loads based on:– land use, – annual runoff, – drainage area, and – system performance
• does not factor in volume reductions for infiltration
61
62
Simple Method with BMPs
L = 0.226 * R * C * A * RE• L = Annual load (lbs)• R = Annual runoff (inches)• C = Pollutant concentration (mg/l)• A = Area (acres)• 0.226 = Unit conversion factor• RE=Best Management Practice removal
efficiency (%)
63
BMP Sediment Removal
64
Brackett Road Case Study
65
66
Many Bad Examples
67
Predominant Pollutant Concentrations
68
Sediment From Each Site
69
Estimated Unpaved Sediment
4.6 Tons/acre/year
70
Ranking of Alternatives
71
Simple Reference
72
Rates
• TN – 25 tons/acre/year• NC – 100 tons/acre/year• CA – 2 to 480 tons/acre/year
For a 15‐ft wide gravel road, 1 ton/acre/year~ 0.083 inches/yearRange of loss = 1/6 in to 3.3 in/yr
73
Northeast Regional Climate Center
• Home Pagehttp://precip.eas.cornell.edu/
• Extreme Precipitationhttp://precip.eas.cornell.edu/
• Map Toolhttp://precip.eas.cornell.edu/
74
Map Tool
75
76
77
StreamStats
• Home Pagehttp://streamstats.usgs.gov/
• State Applicationhttp://streamstats.usgs.gov/ssonline.html
78