C-TEC Systemtechnik und Serviceleistung für die Werkstoffprüfung GmbH.
-
Upload
juan-sandoval -
Category
Documents
-
view
216 -
download
0
Transcript of C-TEC Systemtechnik und Serviceleistung für die Werkstoffprüfung GmbH.
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
C-TEC Systemtechnik und Serviceleistungfür die Werkstoffprüfung GmbH
The Origin of the company C-TEC:
Foundation in 1994
Commercial basis: development of „Pipeline Crawlers“
In 1995 the first C-TEC Crawler was sold to SGS (after nearly one year of fulltime development)
Frequent enquiries of customers made C-TEC extend their product range and range of services to react fast on the demands of the international NDT market - now there are:
Pipeline Crawlers, Column Scanners, X-Ray Sets of any kind, Ultrasonic Sets and Equipment, Protective Screen
Measures (x- ray protection), Hardness Gauges, Field Gauges, Ultraviolet Equipment, Tank Floor Testers (TFTs) etc.
Repair, Inspection and Calibration are carried out mainly in the own workshop
Actually the whole range of NDT products is covered!Actually the whole range of NDT products is covered!
C-TEC Systemtechnik und Serviceleistungfür die Werkstoffprüfung GmbH
C-TECproduct range
& service
Pipeline Crawlers
Calibr
ation
Man
ufactu
ring
Sale
Repair
Pipeline Crawlers
C-TEC Systemtechnik und Serviceleistungfür die Werkstoffprüfung GmbH
P i p e l i n e C r a w l e r
Type C200:
Type C400:
P i p e l i n e C r a w l e r C 002
Technical Details
Pipeline diameter from 8 to 24 inches (200 to 600 mm)
Length of pipeline crawler 1700 mm (battery carriage, drive unit and x-ray tube) - Connection: easy removable click-in sockets!
X-Ray tube: ICM SITE-X C1603 (50 - 160 kV, 1 - 3 mA)
Total weight of crawler 44 kg
Maximum gradient angle within pipeline 30°
Battery pack of crawler contains 4 gel batteries (maintenance-free) with an output of together about 48 V/12 Ah
2 Drive batteries in case that battery pack fails to drive crawler out of the pipeline - output 24 V/4 Ah
P i p e l i n e C r a w l e r C 004
Technical Details
Pipeline diameter from 16 to 64 inches (400 to 1600 mm)
Length of pipeline crawler 3000 mm (battery carriage, drive unit and x-ray tube) - Connection: easy removable click-in sockets!
X-Ray tube: ICM SITE-X C3003 (90 - 300 kV, 1 - 5 mA)or ICM SITE-X C2254 (70 - 225 kV, 1 - 4 mA)
Total weight of crawler 178 kg (with C3003) or 175 kg (with C2254)
Maximum gradient angle within pipeline 30°
Battery pack of crawler contains 10 gel batteries (maintenance-free) with an output of together about 120 V/18 Ah
2 Drive batteries in case that battery pack fails to drive crawler out of the pipeline - output 24 V/18 Ah
C-TEC Systemtechnik und Serviceleistungfür die Werkstoffprüfung GmbH
C-TECproduct range
& service
Pipeline Crawlers X-Ray Units
Calibr
ation
Man
ufactu
ring
Sale
Repair
X-Ray Units
C-TEC Systemtechnik und Serviceleistungfür die Werkstoffprüfung GmbH
ICM X-RAY UNITS
Service range of C-TEC
Sale
ICM x-ray units with energy range of 160 - 300 kV/3 - 6 mA
new and 2nd hand x-ray units of all other manufacturers
(e. g. Yxlon (Philips/Andex), Seifert, Gilardoni, Scanray, Toshiba etc.)
C-TEC => your link to all manufacturers
Service
Annual inspection including certificate, BGV A2 inspection
Focal spot and energy measuring including certificate
General repair (big stock of spare parts available)
Rental
C-TEC Systemtechnik und Serviceleistungfür die Werkstoffprüfung GmbH
C-TECproduct range
& service
Pipeline Crawlers X-Ray Units
Column ScanningDevices
Calibr
ation
Man
ufactu
ring
Sale
Repair
Column ScanningDevices
C-TEC Systemtechnik und Serviceleistungfür die Werkstoffprüfung GmbH
C-TEC „C-SCAN“ Column Scanning Device
Advantages of the „C-SCAN“
C-TEC Systemtechnik und Serviceleistungfür die Werkstoffprüfung GmbH
C-TECproduct range
& service
Pipeline Crawlers X-Ray Units
Other Servicesin NDT
Column ScanningDevices
Calibr
ation
Man
ufactu
ring
Sale
Repair
C-TEC Systemtechnik und Serviceleistungfür die Werkstoffprüfung GmbH
Other Servicesin NDT
How can we be of assistance to you?How can we be of assistance to you?
C-TEC is covering (nearly) the whole range of products for Non-Destructive Testing (NDT):
Ultrasonic Equipment X-Ray Equipment
Wallthickness Gauges Gamma Ray Equipment
Magnetic Inspection UV Lamps
Field Measuring Gauges Hardness Gauges
Brightness Intesity Metres Densitometres
Dose Metres Charger (of all kind)
Signs/Plates Protective Screen Measures
Adhesive Tape/Material and much more ....
How can we keep you informed?How can we keep you informed?
C-TEC always delivers the proper documentation for your files - no matter what kind of work was carried out:
Sample!Sample!Sample!
We are looking forward to welcoming you!We are looking forward to welcoming you!
C-TECC-TEC Systemtechnik & Serviceleistung Systemtechnik & Serviceleistung
für die Werkstoffprüfung GmbHfür die Werkstoffprüfung GmbH
Robert-Bosch-Straße 10Robert-Bosch-Straße 10
D-59199 Bönen, GermanyD-59199 Bönen, Germany
Telefon: +49-23 83-9 10 41-0Telefon: +49-23 83-9 10 41-0
Telefax: +49-23 83-9 10 41-21Telefax: +49-23 83-9 10 41-21
Email: [email protected]: [email protected]
URL: www.c-tec-ndt.comURL: www.c-tec-ndt.com