C-4040 Zoom Reference Manual (5.9 MB€¦ · Thank you for purchasing an Olympus digital camera....
Transcript of C-4040 Zoom Reference Manual (5.9 MB€¦ · Thank you for purchasing an Olympus digital camera....
� Thank you for purchasing an Olympus digital camera. Before youstart to use your new camera, please read these instructionscarefully to enjoy optimum performance and a longer service life.Keep this manual in a safe place for future reference.
� We recommend that you take test shots to get accustomed toyour camera before taking important photographs.
REFERENCE MANUAL
2
For customers in CanadaThis Class B digital apparatus meets all requirements of the CanadianInterference-Causing Equipment Regulations.For customers in Europe
“CE” mark indicates that this product complies with the Europeanrequirements for safety, health, environment and customerprotection.
For customers in USA
Trademarks• IBM is a registered trademark of International Business Machines
Corporation.• Microsoft and Windows are registered trademarks of Microsoft Corporation.• Macintosh is a trademark of Apple Computer Inc.• All other company and product names are registered trademarks and/or
trademarks of their respective owners.• The standards for camera file systems referred to in this manual are the
“Design Rule for Camera File System/DCF” standards stipulated by theJapan Electronics and Information Technology Industries Association(JEITA).
Declaration of Conformity Model Number : C-4040ZOOMTrade Name : OLYMPUSResponsible Party : Olympus America Inc.Address : 2 Corporate Center Drive, Melville, New York
11747-3157 U.S.A.Telephone Number : 631-844-5000
Tested To Comply With FCC StandardsFOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subjectto the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including
interference that may cause undesired operation.
3
Major features
Stores your pictures on SmartMedia (card).
Picture transfer to a computer
TV Playback*
Take sequential shots!
Easy menu operationMenus are grouped according to function.
Record movies!In addition to still pictures, you can also record video with sound.
Assign a function you use frequently to a button.
Exposure modes to suit various applications.P: Program autoA: Aperture priorityS: Shutter priorityM: Manual mode
DRIVE
WB
MODE MENU
ENLARGE SIZE settingLets you make clear, good-quality prints in larger sizes such as A3 (11" x 14"), etc.
*Video signal is either NTSC or PAL compatible depending on the video standard in the intended area of distribution.
4
C o n t e n t sName of parts ............................................................................10
Camera 10Viewfinder indications 12Control panel indications 13Monitor indications — Shooting information 15Monitor indications — Playback information 19
Still picture playback information 19Movie playback information 20
How to use this manual ................................................................21
Getting started 23Attaching the strap ................................................................24Loading the batteries ..............................................................25
Battery check 26Card basics ..........................................................................28
Inserting/ejecting the card 29Power on/off ........................................................................30
Card check 31Date/time setting ..................................................................32Adjusting the diopter ..............................................................35Holding the camera................................................................35
Quick-start guide 36Taking still pictures ..........................................................37Recording movies ..........................................................38Viewing still pictures — Using Quick View ........................39Playing back movies — Using Quick View ........................40Erasing pictures ................................................................41
Ch
ap
te
r 1
Ch
ap
ter 2
5
Using the menus 42What are the menus? ............................................................43Menu basics ..........................................................................43Top menu ..............................................................................44MODE MENU........................................................................45Using tabs ............................................................................46Selecting, setting, and saving functions ....................................47Example of how to set a function ............................................48MODE MENU functions (shooting) ..........................................49MODE MENU functions (playback)..........................................53Shortcut menu........................................................................54Mode dial & shortcut menus....................................................55Mode dial & factory default settings ........................................56
Shooting basics 58Shooting mode setting — Mode dial........................................59
Aperture setting — Aperture priority shooting 61Shutter speed setting — Shutter priority shooting 62Aperture & Shutter speed setting — Manual shooting 63
How to use the shutter button ................................................64Focusing ..............................................................................65
Auto focus 65When Auto focus does not work — Subjects that are difficult to focus on 66
Focus lock— Focusing on subjects that are not in the center of the frame 67
AF MODE — Changing the focus range 68FULLTIME AF — A reliable time-saving way to focus 69Manual focus 70
Taking still pictures ..................................................72Taking still pictures while using the viewfinder 72Taking still pictures while using the monitor 74
Ch
ap
te
r 3
Ch
ap
te
r 4
C o n t e n t s
6
Recording movies ..........................................................77Zoom — Telephoto/Wide-angle shooting ..............................79
Digital zoom 79Flash shooting ......................................................................81
Auto-flash 81Red-eye reduction flash 81Fill-in flash 81Flash off 82Slow Synchronization
SLOW1 SLOW2 SLOW 82Using the Slow Synchronization flash 83Using the flash 84Flash intensity control 86
Advanced shooting 87Sequential shooting ................................................................88
Sequential shooting & AF Sequential shooting 88Auto bracketing — Shooting pictures sequentially with a different exposure for each frame 89
Metering modes — Metering the subject brightness ..................91Spot metering — Selecting the metering area 91Multi-metering — Metering the exposure of more than one point in the frame 92AE lock — Locking the exposure 94
Macro mode setting — Taking close-up pictures ......................96FUNCTION — Taking black & white or sepia-toned pictures......97Panorama shooting ................................................................98Recording sound with still pictures ........................................100Recording sound with movies ................................................101
Ch
ap
te
r 4
Ch
ap
te
r 5
C o n t e n t s
7
Adjusting image quality and exposure 102Record mode ......................................................................103
Selecting record modes 103ENLARGE SIZE 106
ISO sensitivity ......................................................................107Exposure compensation ........................................................108White balance ....................................................................109
AUTO (auto white balance) 109PRESET (preset white balance) 109
(One-Touch white balance) 109White balance adjustment 111
Sharpness............................................................................112Contrast ..............................................................................113Noise reduction ..................................................................114
Playback 115Playing back still pictures ......................................................116
Single-frame playback 116Quick View 116
Slide-show ..........................................................................117Playing back movies — MOVIE PLAY ....................................118
MOVIE PLAYBACK 119INDEX 120EDIT 122
Displaying shooting information ............................................124Close-up playback ..............................................................125Index display ......................................................................126
Selecting the number of pictures 127Adding sound......................................................................128Protect ................................................................................129
Ch
ap
te
r 6
Ch
ap
te
r 7
C o n t e n t s
8
Erasing pictures ..................................................................130Single-frame erase 130All-frame erase 131
Formatting cards ..................................................................132Playback on a TV ................................................................133
Picture rotation 134
Useful functions 135Custom button......................................................................136
Setting the custom button 137Using the custom button 137
Shortcut ..............................................................................139Setting the shortcut menu 140Using the shortcut menu 141
Self-timer shooting ..............................................................142All Reset ..............................................................................143Beep ..................................................................................146Rec View ............................................................................146File name ............................................................................147Pixel Mapping ....................................................................148Measurement units: m/ft (meters/feet) ..................................149
Print setting 150How to print pictures ............................................................151All-frame Print Reserve ........................................................153Single-frame Print Reserve ....................................................154Trimming setting ..................................................................156Resetting Print Reserve ..........................................................159
Ch
ap
ter
7C
ha
pt
er
8
Ch
ap
ter
9C o n t e n t s
9
Transferring pictures to a computer 160Connecting directly to a computer by cable ............................161
How to connect 162Installing a USB driver when using Windows 98/98SE 164
Transferring images to a computer — Downloading................166Removing the card 170Removing the USB cable 172
Saving directly from a card ..................................................173
Using optional accessories 174AC adapter ........................................................................175External flash ......................................................................176
Using the FL-40 external flash 176Using commercially available external flashes 178Compatible commercially available external flashes 179
Remote control shooting........................................................180
Miscellaneous 182Troubleshooting....................................................................183User maintenance ................................................................189
After use 189Cleaning the camera 189
Error codes..........................................................................190Specifications ......................................................................192Glossary of terms ................................................................194Index ..................................................................................197
Ch
ap
te
r 1
0C
ha
pte
r 1
1C
ha
pt
er
1
2C o n t e n t s
10
Camera
Self-timer/Remotecontrol lamp (P. 142, 180)
Diopter adjustment dial (P. 35)
Zoom lever (T/W) (P. 79) Index display/Close-up playback lever ( / )(P. 125, 126)
Shutter button (P. 64)
Control panel (P. 13, 14)
Flash (P. 84)
Microphone (P. 128)
A/V OUT jack (MONO) (P. 133)
Card cover (P. 29)
Strap eyelet(P. 24)
Lens
Connector cover (P. 133)
5-pin external flash socket ( ) (P. 176)● Unscrew to remove the cover
before connecting the bracket cable.
USB connector (P. 162)
DC-IN jack (P. 175)
Remote control receiver(P. 180)
Nam
e o
f p
arts
11
Camera (Cont.)
AE lock button (P. 94)
Custom button ( ) (P. 136)
Protect button ( ) (P. 129)
Rotation button (P. 134)
Erase button ( ) (P. 130)Flash mode button ( ) (P. 84)
Macro/Spot button ( ) (P. 91, 96)
Print button ( ) (P. 153)
Mode dial ( , A/S/M, P, OFF, ) (P. 30, 59, 60, 116)
Viewfinder (P. 12)
Monitor (P. 15–20, 74)
OK/Menu button (P. 43)Manual focus button( ) (P. 70)
Monitor button( ) (P. 74)
Card access lamp(P. 64)
Arrow pad (ÑñÉí)
Battery compartment lock (P. 25)
Batterycompartmentcover (P. 25) Tripod socket
(P. 142)
Nam
e o
f p
arts
12
Viewfinder indications
1 Orange lamp (P. 72, 84)● In some situations, this lamp lights up when you press the shutter button
halfway. This indicates that the flash will then fire when the picture istaken.
● Blinks if the flash is required and the flash is turned off.● When this lamp blinks just after you change from the flash override
mode to another mode or after you shoot with the flash, it means thatthe flash is recharging. Wait until the lamp stops blinking, then press theshutter button.
2 Green lamp (P. 72)● When you press the shutter button down halfway to lock focus and
exposure, this lamp lights. If the subject is out of focus, the lamp blinks.● Blinks when there is a problem with the card.
3 AF target mark (P. 72)● Place this on the subject.
1
2
3
Nam
e o
f p
arts
13
Control panel indications
1 Flash mode (P. 81–83)● Displayed when the flash mode is selected by pressing the (flash
mode) button.No indication: Auto-flash, : Red-eye reduction flash, : Fill-in flash,
SLOW: Slow synchronization flash, : Off (flash override)
2 Manual Focus (P. 70, 71)● Displayed when locking focus using the Manual focus function.
3 Flash intensity control (P. 86)● Displayed when the amount of the light emitted by the flash is adjusted.
4 Battery check (P. 26)● When remaining battery power is low, the battery check indication
changes as follows:
● Be aware that the time when the battery check indication appearsvaries depending on the type of batteries used.
1 3 42
0!@#
$ % ^ &
56789
5 Card error (P. 31, 190, 191)● When the power is turned on, the camera checks the card. If there is a
problem with the card, this indication appears.
6 White balance (P. 110)● Displayed when the White balance is set to any mode except AUTO.
7 ISO (P. 107)● Displayed when the ISO is set to any mode except AUTO. When the
ISO is increased automatically in the AUTO mode, this indication blinks.
Nam
e o
f p
arts
Fully charged Low powerNo power
Blinks, then turns off.
14
Control panel indications (Cont.)
8 Exposure compensation (P. 108)● Displayed when exposure compensation is set to any value except 0.
9 Auto-bracket (P. 90)● Displayed when the drive mode is set to the Auto-bracket mode.
0 Macro mode (P. 96)● Displayed when the macro mode is engaged.
! Spot metering mode (P. 91)● Displayed when the Spot metering mode is set.
@ Sequential shooting (P. 88)● Displayed when the drive mode is set to Sequential shooting or AF
Sequential shooting.
# Self-timer/remote control mode (P. 142, 180)● Displayed when self-timer shooting or remote control shooting is set.
$ Record mode (P. 103) (TIFF, SHQ, HQ, SQ1, SQ2)● Displays the record mode. If SHQ or HQ is set higher than 2272 x 1704,
the corresponding indication blinks.
% Card writing● Displayed when recorded pictures are being written to a card.
^ Sound record (P. 100, 101)● Displayed when the sound record mode is set to “ON”.
& Number of storable still pictures (P. 75)● Displays the number of still pictures you can shoot.
Seconds remaining ( mode only) (P. 77)● Displays available movie recording time.
Card error (P. 31)● Displayed if there is a problem with the card. T See “Error codes” on
page 190, 191.
1 3 42
0!@#
$ % ^ &
56789
Nam
e o
f p
arts
15
Monitor indications — Shooting information
The indications vary depending on the shooting mode.
The information below is displayedfor about 3 seconds after operatingthe buttons/mode dial or closing themenus.
The information below is alwaysdisplayed in the shooting mode.
* The illustrations show examples ofindications displayed when the modedial is set to P.
1 Shooting mode (P. 59, 60)● Displays the shooting mode.
P: Program mode, A: Aperture priority mode, S: Shutter priority mode,M: Manual mode, : Movie mode
2 Aperture value (P. 61)● Displays the current aperture value.
3 Shutter speed (P. 62)● Displays the current shutter speed.
4 Exposure compensation (P. 108)● Displays the current exposure (brightness) compensation value.
Exposure differential (M mode only) (P. 63)● Displays the difference between the exposure determined by the
currently selected aperture and shutter speed compared to theexposure level considered optimal by the camera.
5 AF target mark (P. 74)● Place this on the subject.
AELSLOW1
2272x1704
AEL Nam
e o
f p
arts
16
Monitor indications — Shooting information (Cont.)
6 Number of storable still pictures (P. 75)● Displays the number of still pictures you can shoot.
Seconds remaining ( mode only) (P. 77)● Displays available movie recording time.
7 Manual Focus (P. 70)● Displayed when locking focus using the Manual focus function.
8 Memory gauge (P. 76, 78)● Displays the amount of space used by the pictures stored in the built-in
memory. If you take pictures continuously, the indication changes asshown below.
The memory gauge changes depending on the number of storablepictures or seconds remaining.
9 Exposure lock (P. 92 – 95)
AEL : AE lock● The exposure is locked until single-frame shooting is performed. After
you shoot, the indication disappears.
MEMO : AE memory● The exposure is locked and retained in memory even after shooting.
This indicator is displayed until the AE memory is turned off.
Nam
e o
f p
arts AEL
17
Monitor indications — Shooting information (Cont.)
0 Drive mode (P. 88)● Displayed when the drive mode is set on the menus.
: Single-frame shooting, : Sequential shooting, : AFSequential shooting, : Self-timer/remote control shooting, BKT :Auto-bracket
! White balance (P. 110)● Displayed when WB is set on the menus.
No indication: AUTO, : Daylight, : Overcast, : Tungsten light, : Fluorescent, : One touch white balance
@ ISO (P. 107)● Displays the ISO (AUTO, 100, 200 or 400) selected on the menus.
When set to AUTO, the ISO changes to 100 when the Mode dial is setto A/S/M. When AUTO is selected, the ISO is automatically increased inlow-light situations when the flash is not used. This is to prevent blurringfrom camera movement.
# Record mode (P. 103) TIFF/SHQ/HQ/SQ1/SQ2● Displays the record mode selected on the menus.
$ Number of pixels (P. 104)● Displays the number of pixels.
SLOW1
2272x1704
AEL
Nam
e o
f p
arts
18
Monitor indications — Shooting information (Cont.)
% Flash mode (P. 84)● Displayed when the flash mode is selected by pressing the (flash
mode) button.No indication: Auto-flash, : Red-eye reduction flash, : Fill-in flash,
SLOW1/ SLOW2/ SLOW1: Slow synchronization flash, : Off(flash override)
^ Spot metering/Macro mode (P. 91, 96)● Displayed when the Spot metering/Macro mode is selected by pressing
the (Macro/Spot) button.No indication: Digital ESP (factory default setting), : Spot metering,
: Macro, : Spot metering+Macro
& Sound record (P. 100, 101)● Displayed when is set on the menus.
Nam
e o
f p
arts SLOW1
2272x1704
AEL
19
Monitor indications — Playback information
INFO setting on the Menu allows you to select how much information todisplay (P. 124).
Still picture playback information
1 Battery check● The battery check indication
changes as follows:
● Be aware that the time whenthe battery check indicationappears varies depending onthe type of batteries used.
2 Print reserve (P. 154)● Displayed when the Print
reserve is set.
3 Number of prints (P. 154)● Displays the number of prints.
4 Sound record● Displayed when sound is
recorded.
5 Protect (P. 129)● Displayed when the picture is
protected.
6 Record mode
7 Frame number
8 Time
9 Date● The year 2001 is displayed as
01.
0 Number of pixels
! Aperture value
@ Shutter speed
# Exposure compensation$ White balance
% ISO
^ File number
HQ
’01.12.23. 21:56 6453
x10
HQSIZE: 2272x1704F2.0 1/800 +2.0
ISO400’01.12.23 21:56FILE: 123–3456
x10
Nam
e o
f p
arts
When INFO is set to OFF When INFO is set to ON
Fully charged
Low power No power
Noindication
20
Monitor indications — Playback information (Cont.)
Movie playback information
● The indications that appear on a movie picture that has been selected anddisplayed from the thumbnail display are different from those that appearwhen the movie picture is displayed using the movie play function (P. 116,119).
1 Battery check (P. 19)2 Movie mark (P. 116)
3 Sound record● Displayed when sound is
recorded.
4 Protect (P. 129)● Displayed when the picture is
protected.
5 Frame number6 Date
● The year 2001 is displayed as01.
7 Record mode8 Number of pixels
9 File number● During movie playback, the
recording time appears asfollows:
Total recording time
0" / 15"Playing time
6453
HQSIZE: 320x240
’01.12.23FILE: 123–3456
Nam
e o
f p
arts
When INFO is set to OFF When INFO is set to ON
Date/time setting
3 Press í on the arrow pad to selectMODE MENU.
● In this step and the following steps, thescreens show examples of the menusdisplayed in the P mode.
4 Press ñ to select SETUP, then pressí.● The items in the SETUP menu appear.
5 Press Ññ to select , then press í.
● The screen appears.
DRIVE
WB
MODE MENU
Chapte
r 1 It is possible to set the date/time of the built-in clock. Since the date/time is
saved with recorded pictures, be sure to set it correctly.
1 Set the mode dial to anyposition except OFF.● Be sure to remove the lens cap
beforehand since the lensautomatically extrudes when themode dial is set to any positionexcept .
2 Press to display Menu(P. 43).● The monitor turns on
automatically.
m
SETU
PCA
MCA
RDPI
C
BABATTERTTERY SAY SAVEVESHORSHORT CUTT CUT
m/ftm/ft
’01.01.0101.01.0100:0000:00
SETU
PCA
MCA
RDPI
C LOWLOW
ONON
ONON
RESETRESETREC VIEW
FILE NAMEFILE NAMEPIXEL MAPPINGPIXEL MAPPING
ALL RESETALL RESET
21
How to use this manual
The instructions in this manual use a series of numbers for each operatingprocedure and button/dial illustration. Follow these numbers in order whenoperating the camera.
Example 1
If a button isshown in black,press it as partof the step.
Set the mode dial to the position shown in the illustration. Inthis example, you would set P.
Means “Pressthis button”.
Ñ, ñ, É and í used in instructions correspondto the buttons on the arrow pad as shown.
Ñ
ñ
É í
22
How to use this manual (Cont.)
Example 2
Focusing (Cont.)
Chapte
r 4
1 In the top menu, select MODE MENU T CAMERA T FULLTIME AF TON.
2 Turn on the monitor (P. 74).● If the monitor is not on, Fulltime AF does not function.
FULLTIME AF keeps the image on the monitor in focus at all times, withouthaving to press the shutter button halfway. This function reduces focusingtime. When OFF is selected, images cannot be focused unless the shutterbutton is pressed halfway.
FULLTIME AF — A reliable time-saving way to focus
● If (for movies) is set to OFF, the camera will adjust the focus andexposure as needed during movie recording, regardless of the Fulltime AFsetting.
● Battery life is shorter when Fulltime AF is used.
Mode dial & Fulltime AF
Mode dial Fulltime AF Factory default settingP � OFF
A/S/M � OFF
– –
Before using this function, set the mode dial to the positionshown.
How to use the menu is shown here. Set the functions in the menus in the order ofthese arrows. Before using the menus, read “Using the Menus”, Chapter 3 fordetails.
Getting startedBefore using the camera, you should
follow the steps outlined in thischapter.
Chapter 1
Loosen the strap in thestopper beforehand toadjust the strap length.
Thread the strap throughthe stopper as indicated bythe arrows. When the straplength is satisfactory, pullon the strap to make sure itis securely fastened.
Pull the string loop throughthe hole in the lens cap.
24
Attaching the strapChapte
r 1
Stopper5
4
● Always put the camera in its case when carrying it.● Be careful with the strap when you carry the camera, as it can easily catch
on stray objects, causing serious damage.● Attach the strap correctly as shown so that the camera does not fall off. If
the strap is attached incorrectly and the camera falls off, Olympus is notresponsible for any damages.
Put the strap through thestring loop.
Thread the strap throughthe strap eyelet.
Attach the strap to theother strap eyelet followingsteps 3 – 5.
1
2
3
4
5
62
3
Strap eyelet
Slide the battery compartmentlock on the battery compartmentcover in the direction of .
25
Loading the batteries
Chapte
r 1This camera uses 2 CR-V3 lithium battery packs or 4 AA (R6) NiMH batteries,
NiCd batteries, alkaline batteries or lithium batteries.
Important:● CR-V3 lithium battery packs cannot be charged.● Do not peel the label on a CR-V3 lithium battery pack. If an insulating sheet
covers the terminals, peel it off ONLY from the terminals.
Make sure the camera is turnedoff (i.e. the mode dial is set toOFF).
1
Slide the battery compartment cover inthe direction of the arrow printed on it,using your fingertip. Using a fingernailcould result in injury.
4
5
2
When using lithium battery packs When using AA (R6) batteries
Insert thebatteries in thedirectionshown in theillustration.
3
~ Continued on next page
Close the battery compartment cover, thenpress it down and slide it in the oppositedirection of the arrow printed on it.● When pressing the battery compartment
cover shut, be sure to press the center ofthe cover, as it may be difficult to closeproperly by pressing the edge.
● Make sure the cover is completely closed.
Slide the battery compartment lock onthe battery compartment cover in thedirection of .
26
Loading the batteries (Cont.)Chapte
r 1
● If the terminals inside the battery compartment are dirty, it will noticeablyshorten the life of the batteries. Do not touch the inside of the batterycompartment.
● If the camera is left for 1 hour with the batteries removed, all the internalsettings will revert to the default settings.
6
7
8
● After taking a picture or when turning on the power with batteries thatare running low, the camera may emit several short beeps and thenumber of storable pictures will blink. If this happens, the picture justtaken will not turn out properly. Replace the batteries and take thepicture again.
When remaining battery power is low, the battery check indication on thecontrol panel changes as follows:
Battery check
Lights.Remaining powerlevel: high
Blinks. Remaining power level:low. Replace with a newbattery.
Turns off after blinking forapprox. 12 sec. Remaining power level: exhausted.Replace with a new battery.
Service life of CR-V3 lithium battery packs
Shooting conditions1 • Repeat the same function in sequential 2fps shooting conditions for
no more than 10 minutes then take a break• Flash use no more than 50%• One zoom adjustment for every 2 shots• Fulltime AF turned off• Digital zoom off• No displaying on or connecting to a PC• Temperature 25°C (77°F)
2 Repeated sequential display in the slide show mode with periodicbreaks
● The lives of battery packs may vary according to the type of battery,manufacturer, camera shooting conditions, etc.
● When connecting the camera to a PC, it is recommended that you usethe optional AC adapter. (P. 175)
● Power is consumed continuously during the conditions below. Thiscould reduce the number of pictures that can be taken.• When the monitor is turned on.• Repeated auto-focus by depressing the shutter button halfway.• Repeated power zoom adjustments.• When the Fulltime AF mode is turned on.• When the monitor is in the playback mode for an extended period of
time.• When communicating with a PC
27
Loading the batteries (Cont.)
Chapte
r 1
* These figures arefor reference onlyand are notguaranteed.
1 Number of pictures Approx. 400 frames*
2 Display time Approx. 360 minutes*
28
Card basicsChapte
r 1
● 2 MB cards cannot be used.● This camera may not recognize a non-Olympus card (such as 3 V (3.3 V))
or a card that was formatted on another device (such as PC, etc.). Beforeuse, be sure to format the card on this camera (P. 31, 132).
● Market-available 5 V cards cannot be used.
● Operating temperature: 0°C to 55°C (32°F to 131°F); Storing temperature:–20°C to 65°C (–4°F to 149°F); Humidity: up to 95 %
● Put the card into its anti-electrostatic case for storage or transportation.● Do not bend, drop, or apply any physical shock to the card.● Read the provided SmartMedia instruction manual carefully.● Do not touch the contact area of the card.
This camera uses SmartMedia to record pictures. This reference manualuses the term “card” when referring to SmartMedia.
What is SmartMedia?Images recorded and stored on SmartMedia can easily be deleted,overwritten, and/or edited on a PC.
Compatible SmartMedia cards● Provided 16 MB standard card● Optional Olympus CAMEDIA-brand cards (4 MB – 128 MB; all cards except
2MB)● Market-available 3 V (3.3 V) cards (4 MB – 128 MB; all cards except 2MB)
1 Contact areaThe area where the card comes into contactwith the camera
2 Write-protect areaAttach the provided write-protect seal when youwant to protect your data from accidentalerasure or overwriting.
3 Index areaUse the provided index label to indicate thecard’s contents.
1
2
3
Insert the card fully with the contact areafacing towards the monitor side. Insertuntil you feel it locked into place.● Note the orientation of the card. If it is
inserted incorrectly, it may becomejammed.
Push in the card lightly to unlock it, thenpull it out.
29
Card basics (Cont.)
Chapte
r 1
Make sure the camera is turned off (i.e. the modedial is set to OFF).
Open the Card cover.
Close the cover tightly.
1
2
3
3
4
● NEVER open the card cover, eject the card, remove the batteries, ordisconnect the optional AC adapter while the camera is in use or thecamera is communicating with a computer. Doing so could destroy alldata on the card.
● Destroyed data cannot be restored.
Inserting the card
Ejecting the card
Inserting/ejecting the card
1 Press the tabs on the lens cap to remove it.
2 Set the mode dial to P, A/S/M, or .● The camera turns on.● The lens moves out when the mode dial is not set to .
3 Set the mode dial to OFF.● The camera turns off.
30
Power on/offChapte
r 1
Lens cap
Mode dial
Card cover
● If the camera stops workingTTo save battery power, the camera automatically enters the Sleep
mode after about 3 minutes of non-operation. The camera activatesagain as soon as you touch the zoom lever or mode dial, etc.
TIPS
● When there is insufficient space remaining, the camera beeps and CARDFULL appears on the monitor. If this happens, replace the card with anew/storable card or erase unwanted pictures in the existing card to makespace.
● The number of storable pictures may not be reduced every time a picture istaken, or increased when a picture is erased. The amount of data variesdepending on the subject.
31
Power on/off (Cont.)
Chapte
r 1
When the power is turned on, the camera checks the card automatically.
Card check
Control panel Monitor
Card error mark
TIPS
There is no card in thecamera or the card isnot locked into place.T Insert the card until it
locks in place.
There is a problem withthe card.T Use a new card.
The card cannot record,play back or erasepictures.T Format the card.1 Press ñ to select
FORMAT, thenpress .
● The FORMATscreen appears.
2 Press Ñ to selectFORMAT, then press
to startformatting.● When formatting is
complete, themonitor will displaythe subject you areshooting.
FORMAT
YES
NO
CAUTION ERASING ALL
3 Press í on the arrow pad to selectMODE MENU.
● In this step and the following steps, thescreens show examples of the menusdisplayed in the P mode.
4 Press ñ to select SETUP, then pressí.● The items in the SETUP menu appear.
5 Press Ññ to select , then press í.
● The screen appears.
DRIVE
WB
MODE MENU
32
Chapte
r 1
Date/time setting
It is possible to set the date/time of the built-in clock. Since the date/time issaved with recorded pictures, be sure to set it correctly.
1 Set the mode dial to anyposition except OFF.● Be sure to remove the lens cap
beforehand since the lensautomatically extrudes when themode dial is set to any positionexcept .
2 Press to display Menu(P. 43).● The monitor turns on
automatically.
m
SETU
PCA
MCA
RDPI
C
BABATTERTTERY SAY SAVEVESHORT CUT
m/ftm/ft
’01.01.0100:00
SETU
PCA
MCA
RDPI
C LOWLOW
ONON
ONON
RESETRESETREC VIEWREC VIEW
FILE NAMEPIXEL MAPPINGPIXEL MAPPING
ALL RESET
33
Chapte
r 1
SELECT SET GO SELECT SET GO
Date/time setting (Cont.)
8 Press Ññ to set the year. When the year is set, press í to move tothe month (M) setting.● Repeat this procedure until the date and time are completely set.● To move back to the previous setting, press É.
6 When is selected in green onthe screen, press Ññ to selectthe date format.● Select any one of the following
formats:DMY (Day/Month/Year)MDY (Month/Day/Year)YMD (Year/Month/Day)
● This step and the following steps show theprocedure used when the date and timesettings are set to Y-M-D.
7 Press í to move to the year (Y) setting.
screen
SELECT SET GO
34
Date/time setting (Cont.)Chapte
r 1 9 Press .
● The camera returns to the menuscreen.
● If is pressed again, the menuwill disappear and the screen willenter the shooting mode.
● For a more accurate setting, don'tpress until the clock hits 00seconds. The clock starts whenyou press the button.
10 To turn off the camera, set themode dial to OFF.● When the shooting mode is set to
OFF, the lens is retracted.
● The current settings stay the same even when the power is turned off,unless they are readjusted.
● The date setting will be canceled if the camera is left with no batteries forapprox. 1 hour. If this happens, set the date again.
Adjusting the diopter
Turn the Diopter adjustment dial to see the AF target mark clearly.
Viewfinder
AF target mark
Diopter adjustment dial
Holding the camera
Hold the camera firmly with both hands while keeping your elbows at yoursides to prevent the camera from moving. Keep your fingers and the strapaway from the lens and flash. Be aware that using the zoom causes thecamera to shake easily.
Correct
Horizontal grip Vertical grip
Flash
Lens
Do not hold this part of the lens.Top view
35
Adjusting the diopter
Chapte
r 1
Quick-start guideExplains the simplest shooting andplayback methods. This Quick-startguide has been designed for those
who want to become familiar with thecamera in a very short time.
Before using the camera, be sure tofollow the steps explained in chapter 1.
Chapter 2
37
Chapte
r 2
To focus on the subject, press the shutterbutton halfway, slowly and gently.● When the subject is in focus, the green lamp lights
up.
To start shooting, press the shutter button gently all the way(fully). ● The green lamp and card access lamp blink and the camera begins
storing pictures on the card.
Taking still pictures
Green lamp
● NEVER open the card cover, eject the card, remove the batteries, or pullthe plug of an optional AC adapter when the card access lamp is blinking.Doing so could destroy stored pictures and prevent storage of pictures youhave just taken.
● If you shoot with strong backlighting, etc., shadows may be colored inpictures.
Remove the lens cap andset the mode dial to P.
1
Point the camera towards asubject while viewing through theviewfinder.
2
3
4
Card access lamp
38
Chapte
r 2
Press the shutter button halfway. ● The green lamp on the viewfinder lights up.
Press the shutter button all the way to startrecording.● The orange lamp lights up during movie
recording.● When the sound recording mode is set to ON,
sound can be recorded with movies (P. 101).
Press the shutter button all the way again to stop recording.● The card access lamp blinks and the camera starts writing the movie to
the card.● If you use all the displayed seconds remaining, shooting finishes
automatically and the camera starts writing the movie to the card.
3
4
5
Recording movies
Seconds remaining
Remove the lens cap and setthe mode dial to .● The monitor
turns on.
1
Point the camera towardsthe subject and composethe picture while viewingthrough the monitor.
2
Green lamp
Viewfinder
● When the sound recording mode is set to ON, the focus is locked for theentire time you shoot a movie. If the distance between the camera andsubjects changes often, setting the sound recording mode to OFF lets youkeep the subjects focused at all times.
AF target mark
Card access lamp
Display the desired picturesusing the arrow pad.● Pictures indicated by are
movie frames. T See “Playingback movies” on page 40.
2
Jumps to the picture 10 frames behind.
Displays the next picture.
Displays the previous picture.
Jumps to the picture 10 frames ahead.
Viewing still pictures — Using Quick View
Press the (monitor)button twice quickly.● The monitor turns on and
the recorded pictureappears.
1
To return to the shooting mode, press the shutter buttonhalfway.● The monitor turns off. Shoot pictures using the viewfinder.
3
Zoom lever
Turning the zoomlever towards T: Enlarges the
picture (P. 125).W: Displays multiple
pictures at thesame time (P. 126).
● If the camera is not operated for over 3 minutes when the monitor is on, themonitor turns off automatically. To turn it on again, press any button.
39
Chapte
r 2
40
Chapte
r 2
To return to the shooting mode, pressthe shutter button halfway.● The monitor turns off. Shoot pictures
using the viewfinder.
6
Press Ñ on the arrow pad toselect MOVIE PLAY.● The card access lamp blinks
while movie data is accessed.
Press Ññ to select MOVIEPLAYBACK on the MOVIEPLAY screen.
3
Playing back movies — Using Quick View
MODE MENU
MOVIE PLAY
INFO
MOVIE PLAYBACK
INDEX
EDIT
MOVIE PLAMOVIE PLAY
CANCEL SELECT GO
Display the movie frame (picture with ) you want to play back.T See steps 1 and 2 on page 39.
1
4
Press to startPlayback.● When playback
finishes, the screenreturns to thebeginning of themovie.
5
Press to display menu.2
When the ERASE screenappears, press Ñ to select YES.● To cancel erasure, press ñ on
the arrow pad to select NO, andpress or the button.
3
Erasing pictures
ERASE
YES
N ON O
SELECT GO
Display the picture you want to erase. T See steps 1 and 2 onpage 39.
1
Press the (erase) button.2
Press to erase the picture.4
● Make sure the card is not write-protected. If it is, remove the write-protectseal.
41
Chapte
r 2
Using the MenusThis chapter explains what the
camera's menus are and how theywork. Some functions on this
camera are only available by usingthe menus.
Chapter 3
43
What Are the Menus?
Chapte
r 3When you turn on the camera and press the
(OK/Menu) button, what appears on the monitoris generally called "the menu". The menus canbe operated using and ÑñÉí. Sincemany functions on this camera use the menus,understanding them will help you enjoy shootingmore. See how menu operations flow togetheron the chart below.
Menu Basics
Displaying the top menu (P. 44)
Selecting MODE MENU (P. 45)
Selecting the CAMERA, PICTURE,CARD, SETUP tabs (P. 46)
Selecting functions (P. 47)
Selecting settings (P. 47)
Saving settings (P. 47)
Closing the menu (P. 47)
Selecting shortcut menus (P. 54)
�
�
�
�
�
� �
�
button
44
Top MenuChapte
r 3 When displaying menus, the first screen that appears on the monitor is called
the top menu. The contents of this menu change depending on the mode dialposition (see the diagram below). On the top menu, two types of menus areavailable: MODE MENU (P. 45) and the other menus (shortcut menus TP. 54).
On the top menu formovies, is replacedwith MOVIE PLAY.
A/S/M top menu
P top menu
(movie) top menu
(playback) top menu(for still pictures)
Shortcut menus (P. 54)
MODE MENU(P. 45)
Mode dial
DRIVE
WB
MODE MENU
WB
MODE MENU
DRIVE
WB
MODE MENU MODE MENUINFO
45
MODE MENU
Chapte
r 3To enter MODE MENU, press í. Although MODE MENU contains all the
functions that can be used at any given time, available functions depend onthe mode dial position. MODE MENU functions are divided into 4 tabs(CAMERA, PICTURE, CARD, SETUP). See "Using Tabs" on the next page.
P top menu
DRIVE
WB
MODE MENU
MODE MENU
PIC
SET
CARD
ISOA/S/M
FLASH
DRIVEAUTO
IN+
CAME
RA
Tabs
Items for the function
Functions in the menu
PIC
SET
CARD
ISOA/S/M
FLASH
CAME
RA
AUTO100200400
DRIVEDRIVE
46
Using TabsChapte
r 3 When MODE MENU is selected, a screen appears with 4 tabs on the left.
Use Ññ to select a tab.
P top menu
DRIVE
WB
MODE MENU PIC
SET
CARD
ISOA/S/M
FLASH
DRIVEAUTO
IN+
CAME
RAPIC
TURE
CAM
SET
CARD
AUTOAUTO
HQHQ
BLUEBLUEREDRED
WB
CONTRASTCONTRASTSHARPNESS
CAM
SET
PIC
CARD SETUPCARD SETUP
CARD
SETU
PCA
MCA
RDPI
C LOWLOW
ONON
ONON
RESETRESETREC VIEWREC VIEW
FILE NAMEPIXEL MAPPINGPIXEL MAPPING
ALL RESET
CAMERA tab
PICTURE tab
CARD tab
SETUP tab
CAM: CAMERAFunctions for shooting: selecting drive modes,using digital zoom, etc.
PIC: PICTUREFunctions for adjusting images: selecting recordmodes, adjusting white balance, etc.
CARD: CARDCard functions, such as formatting.
SET: SETUPFunctions for changing camera settings: dateand time, shortcut settings, etc.
47
Selecting, Setting, and SavingFunctions
Chapte
r 3After choosing a tab, you can select and set its functions. Pressing í on a
tab displays the functions contained in it. Select the desired function usingÑñ and press í.
PIC
SET
CARD
ISOA/S/M
FLASH
DRIVEAUTO
IN+
CAME
RAPIC
TURE
CAM
SET
CARD
AUTOAUTO
HQHQ
BLUEBLUEREDRED
WB
CONTRASTCONTRASTSHARPNESSSHARPNESS
CAM
SET
PIC
CARD SETUP
CARD
SETU
PCA
MCA
RDPI
C LOWLOW
ONON
ONON
RESETRESETREC VIEWREC VIEW
FILE NAMEFILE NAMEPIXEL MAPPINGPIXEL MAPPING
ALL RESETALL RESET
CAMERA tab
PICTURE tab
CARD tab
SETUP tab
PIC
SET
CARD
ISOA/S/M
FLASH
CAME
RA DRIVE
BKT
PIC
SET
CARD
ISOA/S/M
FLASH
AUTO
IN+
CAME
RA DRIVE
PICTU
RECA
MSE
TCA
RD
AUTOAUTO
HQHQ
BLUEBLUEREDRED
WB
CONTRASTCONTRASTSHARPNESSSHARPNESS
CARD
CAM
SET
PIC
CARD SETUP
SETU
PCA
MCA
RDPI
C LOWLOW
ONON
ONON
RESETRESETREC VIEWREC VIEW
FILE NAMEFILE NAME
ALL RESET
PIXEL MAPPINGPIXEL MAPPING
The sliding bar is displayed when anitem's menu continues on furtherscreens.
The available itemsfor the function aredisplayed.
Use the arrow pad toselect the desired item.
Press to save asetting.
*The available itemsvary depending on thefunctions you choose.
As an example, you willset (beep sound) toOFF on the next page.
CAME
RA
48
Example of How to Set a FunctionChapte
r 3 Follow the steps below to set one function in MODE MENU. In this example,
you will set (beep sound) to OFF when the mode dial is set to P.
1 Set the mode dial to P and pressto display the top menu.
DRIVE
WB
MODE MENU
2 Press í to enterMODE MENU.
PIC
SET
CARD
ISOA/S/M
FLASH
DRIVEAUTO
IN+
CAME
RA
A screen isdisplayed withtabs on the left.
3 Keep pressing ñuntil the SETUP tabis selected.
SETU
PCA
MCA
RDPI
C LOWLOW
ONON
ONON
RESETRESETREC VIEWREC VIEW
FILE NAMEFILE NAMEPIXEL MAPPINGPIXEL MAPPING
ALL RESETALL RESET
4 Press í to enterSETUP.
SETU
PCA
MCA
RDPI
C LOWLOW
ONON
ONON
RESETRESETREC VIEWREC VIEW
FILE NAMEFILE NAME
ALL RESET
PIXEL MAPPINGPIXEL MAPPING
SETU
PCA
MCA
RDPI
C LOWLOW
ONON
ONON
RESETRESETREC VIEWREC VIEW
FILE NAMEFILE NAME
ALL RESETALL RESET
PIXEL MAPPINGPIXEL MAPPING
5 Press ñ to select.
6 Press í to displayOFF/LOW/HIGH.
SETU
PCA
MCA
RDPI
C
REC VIEWREC VIEWFILE NAMEFILE NAME
ALL RESETALL RESET
HIGH
OFFLOW
PIXEL MAPPINGPIXEL MAPPING
The factorydefault setting isLOW.
7 Press Ñ to selectOFF.
8 Press to save thesetting. To go back toshooting, press again.
The å markmoves to theselected tab andthe selectionbecomeshighlighted.
Note: Setting in one shooting mode will be the same in other shootingmodes. Menu functions cannot be set separately for each shootingmode.
49
MODE MENU Functions (Shooting)
Chapte
r 3
DRIVE ~P. 88, 89, 142, 180Changes the drive modes, or sets autobracketing or remote/selftimer shooting.
ISO ~P. 107Selects ISO sensitivity (based on normal camera film) fromAUTO/100/200/400.
A/S/M ~P. 61–63Selects the exposure mode from A (Aperture priority auto), S(Shutter priority auto), or M (Manual mode).
~P. 86Adjusts the flash intensity for different shooting conditions.
FLASH ~P. 177When using an external flash, you can choose whether to use itwith the built-in flash or by itself.
SLOW ~P. 83Adjusts the flash for slow shutter speeds.
NOISE REDUCTION ~P. 114Reduces the noise on images during long exposures.
MULTI METERING ~P. 92Decides the best exposure by metering up to 8 different spots in theimage.
50
MODE MENU Functions (Shooting)(Cont.)
Chapte
r 3
DIGITAL ZOOM ~P. 79The maximum optical zoom (3X) can be extended even more by the2.5X digital zoom, making possible up to 7.5X zoom.
FULLTIME AF ~P. 69Keeps the image in focus at all times without having to press theshutter button halfway.
AF MODE ~P. 68Selects the auto focus method (iESP or SPOT).
(still pictures) ~P. 100Allows approx. 4 seconds of sound recording to be attached to apicture.
PANORAMA ~P. 98Allows panorama pictures to be taken with Olympus CAMEDIA-brand SmartMedia cards. To connect pictures into a singlepanoramic image, CAMEDIA Master software is required.
FUNCTION ~P. 97Lets you shoot pictures in black & white or sepia tone.
(movies) ~P. 142, 180Lets you use the remote/self timer function when shooting movies.(When shooting still pictures, can be found in DRIVE.)
(movies) ~P. 101Records sound during movie recording.
51
MODE MENU Functions (Shooting)(Cont.)
Chapte
r 3
~P. 103
Sets the record mode.
WB ~P. 109Sets the appropriate white balance according to the light source.
~P. 111Lets you make fine changes to the white balance manually.
SHARPNESS ~P. 112Adjusts the sharpness of images.
CONTRAST ~P. 113Adjusts the contrast of images.
CARD SETUP ~P. 132Formats cards.
52
MODE MENU Functions (Shooting)(Cont.)
Chapte
r 3
ALL RESET ~P. 143Selects whether to keep the current camera settings when you turnoff the power.
~P. 146Sets the beep sound (used for warnings. etc.) to OFF/LOW/HIGH.
REC VIEW ~P. 146Selects whether to display images on the monitor while saving themto a card.
FILE NAME ~P. 147Chooses how to name files/folders of images to be saved.
PIXEL MAPPING ~P. 148Selects whether to perform “Automatic pixel mapping” when thepower is turned on.
~P. 76Adjusts the brightness of the monitor.
~P. 32Sets the date and time.
m/ft ~P. 149Sets the measurement units (m/ft) used during manual focus.
SHORT CUT ~P. 139Lets you assign frequently-used functions as shortcut menus on thetop menu.
CUSTOM BUTTON ~P. 136Lets you assign a frequently-used function to the custom button onthe camera.
53
MODE MENU Functions (Playback)
Chapte
r 3
~P. 128Adds sound to recorded still pictures.
CARD SETUP ~P. 132Formats cards (FORMAT), or erases all images in the card (ALLERASE).
ALL RESET ~P. 143Selects whether to keep the current camera settings when you turnoff the power.
~P. 146Sets the beep sound (used for warnings. etc.) to OFF/LOW/HIGH.
~P. 76Adjusts the brightness of the monitor.
~P. 32Sets the date and time.
~P. 127Selects the number of frames in the index display.
54
Shortcut MenuChapte
r 3 Shortcut menus are the menus other than MODE MENU on the top menu.
Although most shortcut menus are also contained in MODE MENU, puttingthem on the top menu allows instant access to them. The shortcut menus canbe replaced only when the mode dial is set to P or A/S/M. See "Shortcut" (P. 139) for more details.
Drive mode setting screen
Record mode setting screen
White balance setting screen
P top menu
DRIVE
WB
MODE MENU
PIC
SET
CARD
ISOA/S/M
FLASH
CAME
RA DRIVE
BKT
PICTU
RECA
MSE
TCA
RD
WB
CONTRASTCONTRASTSHARPNESS
HQSQ1SQ2
TIFFSHQ
CAM
SET
CARD
WB
CONTRASTCONTRASTSHARPNESS
PRESETPRESETAUTO
PICTU
RE
55
Mode Dial & Shortcut Menus
Chapte
r 3The diagram below describes the shortcut menus that are available with each
mode dial position. The shortcut menus are the menus other than MODEMENU on the top menu.
These shortcut menus can be replaced withother functions by using “Shortcut” (P. 139).The menus themselves are explained in“MODE MENU functions” (P. 49–52).
Sound recording (movies)Records sound while shooting movies.
Record modeSets the record mode.
White balanceSets the appropriate white balanceaccording to the light source.
Slide-showRuns through all saved pictures one afteranother.
Information displayChanges the amount of shootinginformation displayed on the monitor.
Movie playbackPlays back movies. You can also edit themovies or make indexes of still-shots fromthem.
Information displayChanges the amount of shootinginformation displayed on the monitor.
DRIVE
WB
MODE MENU
WB
MODE MENU
MODE MENUINFO
MODE MENU
MOVIE PLAY
INFO
P top menu (same as in A/S/M)
(movie) top menu
(playback) top menu(for still pictures)
(playback) top menu(for movies)
56
Mode Dial & Factory Default SettingsChapte
r 3 Mode dial
P A/S/MFunction
DRIVE
ISO
A/S/M
FLASH
SLOW
NOISE REDUCTION
MULTI METERING
DIGITAL ZOOM
FULLTIME AF
AF MODE
(still pictures)
(movies)
FUNCTION
WB
(single frame shooting)When BKT is selected:
�1.0/x3–
– OFF –
AUTO 100 AUTO –
–– A
�0 –
IN+ –
SLOW1 –
OFF –
OFF –
OFF –
OFF –
iESP –
OFF –
– ON –
OFF –
HQ: 2272x1704(For other record modes,settings are as follows.)TIFF: 2272x1704SHQ: 2272x1704SQ1: 1280x960/NORMALSQ2: 640x480/NORMAL
HQ –
–
AUTO( when PRESET is selected)
–
57
Mode Dial & Factory Default Settings(Cont.)
Chapte
r 3Mode dial
P A/S/MFunction
SHARPNESS
CONTRAST
CARD SETUP
ALL RESET
REC VIEW
FILE NAME
m/ft
SHORT CUT
CUSTOM BUTTON
INFO
�0 –
AE LOCK –
A: DRIVEB: C: WB
9
�0 –
�0 –
–
ON
LOW
ON –
RESET –
�0
YMD/2001/1/1m –
–
OFF–
–
Shooting basicsThis chapter explains the basics of
taking good pictures with yourcamera. You should read it through in
order to make the most of theinformation provided.
Before using the camera, also besure to read "How to use this manual"
and "Getting started", chapter 1.
Chapter 4
59
Chapte
r 4
Shooting mode setting — Mode dial
Set the mode dial to P, A/S/M or .● The camera turns on. Since the lens automatically
extrudes when the camera is turned on, take off thelens cap first.
● When the camera mode is set to A/S/M or , themonitor turns on automatically.
Program shooting
The simplest way to take still pictures. The camera sets aperture and shutterspeed.
Aperture priority/Shutter priority/Manual shooting
Allows you to set aperture and/or shutter speed manually. When the modedial is set to A/S/M, the following items can be set with the menus:
A (Aperture priority shooting)Allows you to set the aperture manually. The camera sets the shutter speedautomatically. By decreasing the aperture value (F value), you will force thecamera to focus within a smaller range, producing a picture with a blurredbackground. Increasing the value forces the camera to focus over a widerrange in the forward/backward directions, resulting in a picture in which boththe subject and the background are in focus.Aperture setting T P. 61
Aperture (F value) is decreased. Aperture (F value) is increased.
S (Shutter priority shooting)Allows you to set the shutter speed manually. The camera sets the apertureautomatically. Set the shutter speed according to the subject and the type ofpicture you want.Shutter speed setting T P. 62
60
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
M (Manual shooting)Allows you to set the aperture and shutter speed manually. To check theexposure, refer to the exposure differential. This mode gives you morecreative control, allowing you to make the settings you need to get the type ofpicture you want, regardless of optimum exposure.Aperture & shutter speed setting T P. 63
Movie record
Allows you to record movies. The camera sets the aperture and shutter speedautomatically. Even if the subject moves during recording or the distance tothe subject changes, correct focusing and exposure are maintainedcontinuously.When (for movies) is set to ON (P. 101), focus and exposure are lockedfrom the beginning of the movie.
Setting the shutter speed higher lets youcapture fast-moving action without blur. Thesubject will be clear and sharp, as if notmoving.
Setting the shutter speed lower blurs amoving subject, giving the impression ofmovement.
Shooting mode setting — Mode dial (Cont.)
Aperture setting — Aperture priority shooting
1 In the top menu, select MODE MENU T CAMERA T A/S/M T A.
2 To increase theaperture value (Fvalue), press Ñ. To decrease the aperture
value (F value), press ñ.
� If the aperture value is displayed in redThe aperture you have set is unsuitable for the conditions.� appears. T Press ñ to decrease the aperture value.� appears. T Press Ñ to increase the aperture value.
Green:The aperture setting will provideoptimum exposure.
Red:The aperture setting is unsuitable foroptimum exposure.
Zoom position Range of the value
Wide (W) F1.8 – F10.0
Tele (T) F2.6 – F10.0
61
Shooting mode setting — Mode dial (Cont.)
Chapte
r 4
● When the flash is set to the auto-flash mode, the shutter speed is fixed at1/30 sec. in the maximum wide-angle, or 1/100 sec. in the maximumtelephoto, and can never go slower.
62
Chapte
r 4
Shooting mode setting — Mode dial (Cont.)
Shutter speed setting — Shutter priority shooting
1 In the top menu, select MODE MENU T CAMERA T A/S/M T S.
2 To set the shutterspeed faster, pressÑ. To set the shutter
speed slower, press ñ.
� If the shutter speed is shown in redThe shutter speed you have set is unsuitable for the conditions.� appears. T Press ñ to set the shutter speed slower.� appears. T Press Ñ to set the shutter speed faster.
Shutter speed range:4 to 1/800 sec.
Shutter speed
1 In the top menu, select MODE MENU T CAMERA T A/S/M T M.
2
Shooting mode setting — Mode dial (Cont.)
● To avoid camera movement, we recommend use of a tripod for any effectwhich use a lower shutter speed.
Aperture & Shutter speed setting — Manual shooting
To set the shutter speed faster, press Ñ.
To set the shutter speedslower, press ñ.
To increase the aperturevalue (F value), pressÉ.
To decrease the aperturevalue (F value), press í.
� Exposure differential● The difference (ranging from –3.0 to +3.0) between the exposure
determined by the currently selected aperture and shutter speed comparedto the exposure level considered optimal by the camera appears in theupper right-hand corner.
● When the exposure differential is set to less than –3.0 or more than +3.0,the exposure differential appears in red.
● When you press the button, the screen at right appears with thebar indicating current exposure settings. Pressing the shutter buttonhalfway shows how much the current exposure is different from the correctexposure.
F value range: 1.8 to 10.0 (W), 2.6 to 10.0 (T)Shutter speed range: 16 to 1/800 sec.
Aperture (F value) Shutter speed
Exposuredifferential
When the bar is displayed
63
Shooting mode setting — Mode dial (Cont.)
Chapte
r 4
64
Chapte
r 4 1 Point the camera towards the subject.
Place the AF target mark on thesubject while viewing through theviewfinder.Press the shutter button gently(halfway).● When the focus and brightness (exposure)
are locked, the green lamp next to theviewfinder lights.
2 Press the shutter button all the way.● Shooting starts and the green lamp blinks.● P or A/S/M mode: The camera starts
storing your pictures on the card. Whilepictures are being stored, the card accesslamp blinks.
● mode: The camera starts recording amovie.
3 ONLY for the (movie record) modeTo stop recording, press the shutterbutton all the way again. ● The card access lamp blinks and the
camera starts storing the movie on thecard. You cannot record another movieuntil the card access lamp stops blinking,
How to use the shutter button
Viewfinder
Card access lamp
AF target mark Green lamp
Focusing
When you place the AF target mark on a subjectand press the shutter button halfway, the greenlamp lights up. This means that focusing is beingperformed automatically.If the green lamp blinks, focusing is not correct. Ifthis happens, use the AF mode (P. 68), Manualfocus (P. 70) or Focus lock (P. 67).
Auto focus
Viewfinder
AF target mark Green lamp
65
Focusing
Chapte
r 4
66
Chapte
r 4
Focusing (Cont.)
3 Subjects at different distances 4 Fast-moving subjects
Position the AF target mark in the viewfinder on an object that is the samedistance from the camera as the subject, then half-press the shutter button tolock focus, while keeping your finger half-pressed on the shutter button, framethe picture you want to shoot, and then fully press the shutter button (P. 67).
Hold the camera vertically, half-pressthe shutter button and hold it down tolock the focus. Re-posit ion thecamera horizontally, compose thepicture and then fully press theshutter button to take the picture (P. 67).
5 Subjects with no vertical lines
1 Subjects with low contrast 2 Subjects in excessively brightlight in the center of the frame
Under certain types of conditions auto focus may not work properly. If you runinto problems, try the procedure below or switch to Manual focus (P. 70).Conditions 1, 2 and 5Auto focus may not work properly. The green lamp may blink.Conditions 3 and 4Auto focus may not work properly even when the green lamp lights when youpress the Shutter button down halfway.
When Auto focus does not work — Subjects that are difficult to focus on
Focusing (Cont.)
If the subject of your composition is notwithin the AF target mark and focusing isnot possible (as illustrated to the right),try the following:
AF target mark
Focus lock — Focusing on subjects that are not in thecenter of the frame
1 Focus on something withinthe AF target mark. Pressthe Shutter button halfwayto lock the focus.
2 Compose your picture (pointthe camera towards thesubject) while keeping theShutter button pressedhalfway.
3 Press the Shutter button all theway.
● The green lamp blinks.TFocus and exposure are not locked. Release your finger from the
shutter button and the green lamp turns off. Position your subjectagain. Repeat step 1 until the green lamp lights up without blinking.
● The frame in which you focus on a subject is different from theframe in which you meter the light.TUse AE lock (P. 94).
TIPS
Brightness(exposure) is alsolocked and thegreen lamp lights.
Green lamp
67
Focusing (Cont.)
Chapte
r 4
68
Chapte
r 4
Focusing (Cont.)
Allows you to select the focus range of your subject.iESP : Focus selection is based on the entire picture on the screen. Even
when the subject is not in the center of the screen, focusing ispossible.
SPOT : Focus selection is based on the picture within the AF target mark.
In the top menu, select MODE MENU T CAMERA T AF MODE T iESPor SPOT.
AF MODE — Changing the focus range
iESP SPOT
Mode dial & AF mode
Mode dial AF MODE Factory default settingP � iESP
A/S/M � iESP
– –
Focusing (Cont.)
1 In the top menu, select MODE MENU T CAMERA T FULLTIME AF TON.
2 Turn on the monitor (P. 74).● If the monitor is not on, Fulltime AF does not function.
FULLTIME AF keeps the image on the monitor in focus at all times, withouthaving to press the shutter button halfway. This function reduces focusingtime. When OFF is selected, images cannot be focused unless the shutterbutton is pressed halfway.
FULLTIME AF — A reliable time-saving way to focus
● If (for movies) is set to OFF, the camera will adjust the focus andexposure as needed during movie recording, regardless of the Fulltime AFsetting.
● Battery life is shorter when Fulltime AF is used.
Mode dial & Fulltime AF
Mode dial Fulltime AF Factory default settingP � OFF
A/S/M � OFF
– –
69
Chapte
r 4
70
Chapte
r 4
Focusing (Cont.)
If Auto focus is unable to lock, use manual focus.
1 Hold down for more than 1 second.When the focus distance selectionscreen appears on the monitor, pressí to select MF.
2 Press Ññ to select the focus distance. ● During operation, the picture is enlarged.
The lengths shown are for reference only.When the length indicator is moved to lessthan 0.8 m (2.6 ft), the bar displayautomatically switches to the 20 cm(8")–80 cm (31") bar display.
3 Hold down for more than 1 secondto save the setting. ● MF appears in red.
4 Shoot.● Focus is locked at the distance
you have set.
5 To cancel the saved MF setting,hold down again for morethan 1 second to display thefocus distance selection screen.
Manual focus
0.8m2m3m
5m
0.8m2m3m
5m
Focusing (Cont.)
6 To return to the AF mode, press É toselect AF, then press .
● How to shoot while keeping the same focus distance at all timesTThe MF can be locked at the same length as when you perform focus
lock.1 Focus on anything within the AF target mark. Press the shutter
button halfway to lock focus.2 Without letting go of the shutter
button, hold down for more than1 second. The focus distancescreen appears. On the screen, MFis selected and the focus distanceis the same as when you performedfocus lock.
● Although MF is selected and the length indicator reaches the top ofthe bar, focusing is not possible at ∞.TAdjust by moving Ññ slightly while watching the viewfinder.
● Although the focus distance is saved, the picture goes out of focus.T If the zoom lever is pressed after manual focus setting, the saved
focus distance may be changed. Try setting again.
TIPS
0.8m2m3m
5m
0.8m2m3m
5m
71
Chapte
r 4
72
Chapte
r 4
1 Point the camera towards a subjectwhile viewing through the viewfinder.Place the subject on the AF targetmark.● The picture area moves lower in the
viewfinder as you get closer to the subject.If this happens, use the monitor (P. 74).
2 Press the shutter button halfway.● When focus and exposure (brightness) are locked, the green lamp lights.● If the orange lamp lights, the flash fires automatically.T See “Flash shooting” (P. 84).
3 Press the shutter button all the way. ● The green lamp blinks and the camera begins
storing pictures on the card. When the green lampstops blinking, you can take another shot.
● The card access lamp blinks while pictures arebeing stored on the card.
● Number of still pictures that can be stored on a 16MB card THQ record mode (2272 x 1704):Approx. 16SQ2 record mode (640 x 480 NORMAL):Approx. 165
Taking still pictures
The camera actually records a wider area than the picture you composedwhile viewing through the viewfinder.
Taking still pictures while using the viewfinder
Viewfinder
Orange lampGreen lamp
Pictureframe
Picture area atclose distance
AF target mark
Flash
Card access lamp
● How to zoom in on a subject or shoot awider picture (zoom-out)TTo zoom in on a subject, press the
zoom lever towards T. To shoot a widerpicture, press the zoom lever towardsW (P. 79).
● How to shoot using the monitorTPress the (monitor) button (P. 74).
● If you cannot release the shutter buttonTWhile the orange lamp blinks, the flash is charging. During charging,
the shutter button is not released. When the orange lamp goes off,press the shutter button again.
T If CARD FULL appears, there is no space on the card. Delete pictures(P. 130, 131), replace with a new card (P. 29) or transfer pictures to acomputer (P. 161 – 173).
● The subject is outside the AF target mark.TPlace the subject within the AF target mark and use the focus lock
(P. 67).● The green lamp blinks.T If you want to shoot a subject as close as 20 cm (0.6 ft), put the
camera into the macro mode (P. 96).TDepending on the subject, focus and exposure (brightness) may not
be locked (P. 66).● How to reduce the focusing timeTSet FULLTIME AF (P. 69), use the monitor to shoot (P. 74).
● How to lock the exposure onlyTTry AE lock (P. 94). This function is available only when using the
monitor.● How to check the picture just takenTSet REC VIEW to ON. The picture can be displayed on the monitor (P.
146).● How to record sound during shootingTSet (for still pictures) to ON (P. 100).
Taking still pictures (Cont.)
Zoom lever
TIPS
73
Chapte
r 4
74
Chapte
r 4
● Press the shutter button gently using the ball of your finger. If it is pressedhard, the camera may move and pictures may come out blurred.
● Recorded pictures will be saved in the card regardless of whether thecamera is turned off or the batteries are replaced or removed.
● NEVER open the card cover, eject the card, remove the batteries, or pullthe plug when the card access lamp is blinking. Doing so could destroystored pictures and prevent storage of pictures you have just taken.
With the monitor, you can shoot while checking the picture area that thecamera actually records. It is also possible to check information such asmemory gauge, aperture or shutter speed, etc.
Taking still pictures while using the monitor
Taking still pictures (Cont.)
Comparison of the viewfinder & monitorViewfinder Monitor
Advantage:Camera movement does notoccur easily and subjects can beseen clearly even in bright places.Little battery power is used.Disadvantage:When close to a subject, theimage in the viewfinder is a littledifferent from the picture that thecamera actually records.Tips:Use the viewfinder for generalsnapshots (landscape pictures,casual shots, etc.) or when takingseveral pictures in a row.
Advantage:You can check the picture areathat the camera actually records.Disadvantage:Camera movement can occureasily and subjects may bediff icult to see in bright/darkplaces. The monitor uses morebattery power than the viewfinder.Tips:Use the monitor when you needto know the exact area thecamera records, or to shoot asubject 0.2 m - 0.8 m or closer(macro shooting).
● The camera records a wider area than theimage in the viewfinder.
● As you get closer to the subject, the actualimage recorded becomes lower than the one inthe viewfinder (see left).
Viewfinder
Striped area: Picture that thecamera actually records.
1 Press the (monitor) button to turn on the monitor.● In the A/S/M mode, the monitor turns on automatically.
2 Point the camera towards a subject while viewing through themonitor. Place the subject on the AF target mark.
3 Press the shutter button halfway.● When focus and exposure (brightness) are locked, the green lamp lights.● If the orange lamp lights, the flash fires automatically. T See “Flash
shooting” (P. 84).
4 Press the shutter button all the way.● The bottom of the memory gauge lights, the card access lamp blinks, and
the camera begins storing pictures on the card.
Number of storablepictures
Card access lamp
Taking still pictures (Cont.)
AF target mark
Viewfinder
Orange lamp
Green lamp
Memory gauge
75
Chapte
r 4
76
Chapte
r 4
Before shooting/ No picture taken
One picturetaken
More thanone taken
No recordable spaceWhen the indicationreturns to any statusshown on the left, youcan take more shots.
● The monitor does not turn on.T If the camera is not used for over 30 seconds, the monitor turns off. If
you operate the shutter button or zoom lever, the monitor turns onagain.
● The monitor is difficult to see.T If you shoot in bright places such as direct sunlight, vertical lines may
appear on the monitor. In such a case, use the viewfinder.● How to brighten/darken the monitorT 1 In the top menu, select MODE
MENU T SETUP T .2 To brighten the monitor, press Ñ.
To darken it, press ñ. To completethe setting, press .
● Camera movement is less noticeable when using the viewfinderrather than the monitor.
● Also read the “TIPS” on “Taking still pictures while using theviewfinder” (P. 73, 74).
TIPS
● The monitor consumes more battery power than the viewfinder.● If you shoot using the monitor for a long time, noise may appear on
pictures.
If you take pictures continuously, the indication changes as shownbelow. The memory gauge lets you know if another shot is possible.
Taking still pictures (Cont.)
ADJUST GOCANCEL
Recording movies
1 Point the camera towards a subject while viewing through themonitor. Place the subject on the AF target mark.
2 Press the shutter button halfway.● When focus and exposure (brightness) are locked, the green lamp lights.
3 Press the shutter button all the way.● During movie recording, sound is recorded simultaneously. T See
“Recording sound with movies” (P. 101).● During movie recording, recording continues with the focus locked. However,
if (for movies) is set to OFF, the camera will adjust the focus as neededduring movie recording. T See “Note” (P. 79).
Seconds remaining*
* The displayed seconds remaining shows the time you canshoot continuously by holding down the shutter button.
Viewfinder
Green lamp
77
Chapte
r 4
78
Chapte
r 4 4 Press the shutter button all the way to
stop recording.● The card access lamp blinks and the
camera begins storing the movie on thecard. You cannot record another movieas long as the card access lamp isblinking.
● When the card access lamp stopsblinking, the camera has finished writingthe movie to the card. If there is anyspace left on the card, the number ofseconds remaining is displayed. Youcan start shooting another movie.
● If you use all the displayed seconds remaining, shooting finishesautomatically and the camera starts writing the movie to the card.
If you take pictures continuously, the indicationchanges as shown below.
Recording movies (Cont.)
● Shooting is not possible.TShooting is not possible while the camera is saving pictures to the
card. If the memory gauge goes off, you can take another shot.T If CARD FULL appears, there is no space left on the card. Delete
pictures (P. 130, 131), replace with a new card (P. 29) or transferpictures to a computer (P. 161 – 173).
TIPS
Beforeshooting
After shooting, these indications may still be on thescreen. Shooting is not possible until they are gone.
Card access lamp
During shooting Shootingfinishesautomatically.
Telephoto/Wide-angle shooting is possible at up to 3x magnification (opticalzoom limit). By combining the digital zoom with the 3x optical zoom, zoommagnification up to 7.5x (equivalent to 35 mm–260 mm on a 35 mm camera)is possible.
Digital zoom
1 In the top menu, select MODE MENU T CAMERA T DIGITAL ZOOMT ON.
Zoom in on a subject (telephoto)Press the zoom lever toward T tozoom in.
Shoot a wider picture (wide-angle)Press the zoom lever toward W tozoom out.
79
Chapte
r 4
● Since focus is locked during movie recording, the subject may go out offocus if the distance to the subject varies considerably. To avoid this, set to OFF (P. 101) to automatically maintain correct focus.
● In the mode, the factory default setting of is ON. Zoom position islocked at the maximum wide-angle and you can only use the digital zoom. If
is set to OFF, you can only use the optical zoom.
Zoom — Telephoto/Wide-angleshooting
Recording movies (Cont.)
80
Chapte
r 4
Zoom area
Zoom — Telephoto/Wide-angleshooting (Cont.)
Indicates digital zoom
Indicates optical zoom
Digital zoom ONThe cursor moves on the zoom indicatoraccording to the zoom magnification.
● Images captured with the Digital Zoom may appear grainy.● To use the optical zoom, set (for movies) to OFF. Remember the digital
zoom is not possible with this setting.● Camera movement is likely to happen at higher magnifications. Stabilize the
camera with a tripod, etc. to avoid camera movement.
Mode dial & Digital zoom
Mode dial Digital zoom Factory default settingP � OFF
A/S/M � OFF
* – –
2 Press the zoom lever towards T.● The monitor turns on.● If the monitor is turned off, the picture returns to 1x.
*In the mode:When (P. 101) is set to ON, you can only use the digital zoom.When is set to OFF, you can only use the optical zoom.
● In the mode, the factory default setting of is ON. Zoom position islocked at the maximum wide-angle and you can only use the digital zoom. If
is set to OFF, you can only use the optical zoom.
Select a flash mode appropriate to the lightning conditions and the effect youwant to achieve. You can also adjust the amount of light emitted using theflash intensity control (P. 86).See page 176 – 179 for how to use an external flash.
The flash modes are as follows:
Automatically fires in low-light and backlight conditions.
This mode significantly reducesthe phenomenon of “red-eye”by emitt ing about 10 pre-flashes before firing the regularflash. This mode works thesame as the auto-flash exceptfor the pre-flashes.
Flash shooting
Auto-flash
Red-eye reduction flash
The subject’s eyesappear red.
● After the pre-flash, it takes about 1 second before the shutter is released,so do not move the camera and hold it firmly.
● Effectiveness may be limited if the subject is not looking directly at thepreflashes, or if the shooting range is too far. Individual physicalcharacteristics may also limit effectiveness.
The flash fires regardless ofavailable light. This mode isuseful for eliminating shadowson the subject’s face or forcorrecting the color shiftproduced by artificial lightning(especially fluorescent light).
Fill-in flash
● Fill-in flash may not have the desired effect under excessively bright light.
81
Chapte
r 4
82
Chapte
r 4
Flash shooting (Cont.)
The flash does not fire even in low-light conditions. Use this mode insituations where flash photography is not desired or is prohibited, or whenyou want to shoot a natural-looking twilight or night scene.
� SLOW1:1st curtain (front curtain)Usually, regardless of the shutter speed, the flash fires right after the shutterfully opens. This is called 1st curtain. Unless you change it, this is how theflash always fires.
Flash off
● Since a slow shutter speed is automatically selected in low-light situationswhen in the flash off mode, the use of a tripod is recommended to preventyour pictures from being blurred by camera movement.
The Slow Synchronization flash is designed for slow shutter speeds.Normally, when shooting with a flash, shutter speeds cannot go below acertain level to prevent camera movement. But when shooting a night scenebackground, fast shutter speeds can make the background too dark. SlowSynchronization flash allows both a slow shutter speed for the backgroundand a flash for the subject.
Slow Synchronization SLOW1 SLOW2 SLOW
Flash shooting (Cont.)
� SLOW:1st curtain with red-eye reduction This is for when you want to use Slow Synchronization yet also reduce red-eye. For instance, when shooting a person against a brightly lit nightbackground. A normal flash might make the person’s eyes red, but 1st curtainwith red-eye reduction lets you capture the background correctly and reducered-eye at the same time. 2nd curtain with red-eye reduction is not available, because it may takelonger to release the shutter after the pre-flash and 2nd curtain with red-eyereduction may not support the feature.
When the shutter speed is set to 4 sec.
In the top menu, select MODE MENU T CAMERA T SLOW T
SLOW1, SLOW2 or SLOW.
4 0
4 sec.
Shutter closes Shutter fully opens
2nd curtainflash fires
1st curtainflash fires
(front curtain)(rear curtain)
� SLOW2:2nd curtain (rear curtain)In contrast to 1st curtain, 2nd curtain fires the flash just before the shuttercloses. Changing the flash timing can create interesting effects in yourpicture, such as expressing the movement of a car by showing the taillightsstreaming backwards. The slower the shutter speed, the better the effectsturn out.Slowest possible shutter speeds:S mode: 4 sec. M mode: 16 sec.P/A mode: 1 sec. (NOISE REDUCTION OFF), 4 sec. (NOISE REDUCTION
ON)
Use the menu to select one of the 3 Slow synchronization flash modes above.
83
Chapte
r 4
Using the Slow Synchronization flash
84
Chapte
r 4
Flash shooting (Cont.)
1 Press the (flash mode) button repeatedly until the desired flashmode indication appears.● The flash mode changes as follows:
2 Press the shutter button halfway.● Before the flash fires, the orange lamp
blinks.
3 Press the shutter button all the way. ● The flash fires.
Using the flash
Auto-flash (no indication)
Fill-in flash
Control panel
Flash mode
ViewfinderOrange lamp
SLOWSlow synchronization flash
Off
Red-eyereduction flash
Mode dial & Flash mode
Mode dial Flash mode Factory default settingP � Auto-flash
A � Auto-flash ( SLOW1)
A/S/M S Auto-flash, , SLOW, Auto-flash ( SLOW1)
M SLOW, – –
Flash working rangeW (max.): Approx. 0.8 m – 5.6 m (2.6 ft – 18.3 ft)T (max.): Approx. 0.2 m – 3.8 m (0.6 ft – 12.4 ft)
Flash shooting (Cont.)
● If the flash dose not fireTFlash does not fire in the following situations: When shooting a bright
subject, in the movie record mode, during Sequential shooting (P. 88),when FUNCTION is set to WHITE BOARD/BLACK BOARD (P. 97),during Panoramic shooting (P. 98).
● The orange lamp blinks.TThe flash is charging. Remove your finger from the shutter button.
When the lamp stops blinking, press it again.● Camera movement warning (Auto, Red-eye reduction, Fill-in)
When the orange lamp lights, the shutter speed locks at its current level.This helps prevent camera shake problems (shutter speeds that are tooslow can cause blur). However, if the zoom magnification is increasedwhile the orange lamp is lit, the camera will increase the locked shutterspeed accordingly.
Zoom position & Shutter speedW (max.): 1/30 sec., T (max.): 1/100 sec.
TIPS
● The flash may not give you the optimum result in Macro mode, especiallywith wide-angle shooting. Check the result on the monitor. If a conversionlens is attached to the lens, it may reduce the output of the flash.
85
Chapte
r 4
86
Chapte
r 4
+1/3EV
Less brightNormal flash intensity More bright
Flash shooting (Cont.)
You can adjust the amount of light emitted by the flash.In some situations, you may get better results by adjusting light emission.Examples include small subjects, distant backgrounds, and when increasingcontrast.
In the top menu, select MODE MENU T CAMERA T . To increase thelight emission, press Ñ. To decrease the light emission, press ñ. Tocomplete the setting, press .
Flash intensity control
● The flash adjustment effect may not be sufficient if the shutter speed is toofast.
Control panel
Flash intensity control
Mode dial & Flash intensity control
Mode dial Flash intensity Factory defaultcontrol setting
P � �0
A/S/M � �0
– –
Ñ: Light emission is increased by a 1/3 EV each time you press the button.ñ: Light emission is decreased by a 1/3 EV each time you press the button.
(EV: Exposure Value)
Adjustable range
Advanced shootingAdvanced shooting methods such as
metering modes and special effects letyou take more creative pictures.
Chapter 5
88
Chapte
r 5
Sequential shooting
There are 3 Sequential shooting modes: Sequential shooting , AFSequential shooting and Auto bracketing BKT.Sequential shooting modes can be selected from the DRIVE mode menu.
1 In the top menu, select MODE MENU T CAMERA T DRIVET or.
2 Take pictures.● Press the shutter button all the way and keep it
pressed. The camera will take pictures insequence until you release the button.
● Sequential shooting speed (HQ mode): 2frames/sec. approx., number of pictures: 8 max.
Single-frame shooting : Shoots 1 frame at a time when the shutterbutton is pressed all the way. (normal shooting)Sequential shooting : Sequential shooting & AF Sequential shootingT P. 88AF Sequential shooting : Sequential shooting & AF Sequentialshooting T P. 88Self-timer/remote control shooting : Self-timer shooting T P. 142,Remote control shooting T P. 180Auto bracketing BKT : Auto bracketing T P. 89
Drive mode
Sequential shooting : Shoots pictures sequentially. Focus, exposureand white balance are locked at the first frame.AF Sequential shooting : Shoots pictures sequentially. Focus islocked for each frame automatically. The AF Sequential shooting speed islower than normal sequential shooting.
Sequential shooting & AF Sequential shooting
Control panel
Sequential shooting
● Also read the “Note” and “Mode dial & Drive mode” on P. 90.
89
Chapte
r 5
Sequential shooting (Cont.)
Under some conditions, you may obtain better results shooting with exposurecompensation than by using the exposure setting considered optimal by thecamera. When Auto bracket is set, exposure is changed automatically foreach frame when you start shooting. The exposure differential can beselected in the menus. Focus and white balance are locked at the first frame.
Auto bracketing — Shooting pictures sequentially witha different exposure for each frame
Ex: When BKT is set to ±1.0, x3
1 In the top menu, select MODE MENU T CAMERA T DRIVE T BKT.
2 Press Ññ to select the exposuredifferential between each frame (±0.3,±0.6, ±1.0), then press í.
3 Press Ññ to select the number offrames to shoot (x3, x5), then press . ● In some combinations of picture size and
record mode (NORMAL/HIGH), only x3 isavailable.
BKT
CANCEL SELECT GO
0.30.6
x3x5
1.0
BKTBKT
SELECT GO
0.30.6
x3x5
1.0
90
Chapte
r 5
Sequential shooting (Cont.)
4 Take pictures.● Press the shutter button all the way and
keep it pressed to shoot the presetnumber of pictures. You can stop shootingat any time by releasing the shutter button.
Auto bracket
Control panel
Mode dial & Drive modeMode dial Drive mode Factory default settingP � Single-frame shooting
A/S/M � (M: BKT is not available) Single-frame shooting
– –
● Sequential shooting ( , , BKT) is not possible in the TIFF recordmode (P. 103).
● If the SHQ record mode is set to ENLARGE SIZE (P. 106), sequentialshooting ( , , BKT) is not possible.
● When NOISE REDUCTION is ON, sequential shooting ( , , BKT) isnot possible.
● During sequential shooting ( , , BKT), the main flash does not fire.● If there is not enough space available on the card for the number of frames
you have set during auto bracketing, you cannot continue shooting.● If the ISO is set to over 200, noise may appear under some shooting
conditions (P. 107).● If the battery power is low and the battery check blinks during sequential
shooting, shooting stops and the camera starts saving the pictures youhave taken. Whether or not all of the shots are saved depends on howmuch battery power remains.
● Since the shutter speed is set to 1/30 sec. max., exposure is decreasedwhen shooting a dark subject to prevent camera movement.
● To use the external flash during sequential shooting, set the external flashso that it fires for each frame.
91
Chapte
r 5
Metering modes — Metering the subject brightness
There are 3 metering methods: Digital ESP metering, spot metering andmulti-metering.Digital ESP metering T Meters the center of the subject and the area around it.Multi-metering T P. 92
Exposure is determined by metering within the AF target mark. In this mode,a subject can be shot with optimal exposure regardless of the backgroundlight. In the working range of the macro mode, spot metering is also available(spot metering+macro mode).
Mode dial & Spot metering/Macro mode
Mode dial Spot metering/Macro mode Factory default settingP A/S/M � Digital ESP
Control panel
Spot metering
Spot metering — Selecting the metering area
1 Press the button repeatedly until (spot metering) or (spot metering+macro mode) appears on the control panel.
Digital ESP(no indication)
: Macro mode T P. 96
2 Take a picture.
Supported working rangeNormal (except macro) : 0.8 m to ∞ (2.6 ft to ∞)Macro : 0.2 m to 0.8 m (0.6 ft to 2.6 ft)
● If you shoot with strong backlighting, etc., shadows may be colored inpictures.
92
Chapte
r 5
Metering modes — Metering the subject brightness (Cont.)
Meters the brightness of the subject at up to 8 different points to set theoptimal exposure based on the average brightness. Useful with high-contrastsubjects.
Multi-metering — Metering the exposure of more thanone point in the frame
1 (In the A/S/M mode)In the top menu, select MODE MENU T CAMERA T A/S/M T A or S.
2 Press to engage the spot metering mode (P. 91).
3 In the top menu, select MODE MENU T CAMERA T MULTIMETERING T ON.
4 Point the AF target mark where you want to meter the exposure. Thesubject’s brightness can be metered at up to 8 different points.● A metering bar appears on the monitor.● Brightness meter readings are ignored
after the 9th reading.● To cancel the locked multi-metering
exposure, hold down over 1second to display MEMO . Press it againand release it quickly.
5 Take a picture.
AEL
93
Chapte
r 5
Metering modes — Metering the subject brightness (Cont.)
e.g. : When metering 2 points (pressing twice).The average values for the aperture and shutter speed as calculated bymetering 2 points. These values are recalculated every time another meteringpoint is added.
indicates theaverage for the 2metering points.The average isalways shown atthe center of thebar.
� indicates how muchthe present exposure youare metering is differentfrom the averageexposure value. Thepresent exposure can befixed by pressing theshutter button halfwaydown. (The presentexposure is not added tothe average value unlessyou press .)
When � moves ±3 far from the center of the bar (the average reading), thered Éí appears.
The reading with pressed.�indicates the number of times you havepressed the button �indicates the differencebetween the metered and average readings.
● If any of the following buttons are pressed during multi-metering, multi-metering exposure is canceled.
(flash mode) button, mode dial, (macro/spot) button, .
● If multi-metering is not engagedT In the Digital ESP mode, multi-metering is not available. Set the
metering mode to spot metering or spot metering + macro mode.
● How to save the locked multi-metering exposure after shooting (AEmemory)TAfter pressing as many times as required in step 4, hold it
down for more than 1 second. MEMO appears. When MEMO appears, the locked exposure is memorized.
TIPS
94
Chapte
r 5
Metering modes — Metering the subject brightness (Cont.)
AE lock — Locking the exposureSuitable for situations when optimal exposure is difficult to achieve (such asexcessive contrast between the subject and the surroundings). For example,if the sun is in the frame and shooting with automatic exposure results in adark subject, re-compose your shot so that the sun is not in the frame. Then,press the button to lock the metered value (exposure) temporarily.Then compose your shot again with the sun in the frame and shoot. In otherwords, use AE lock when you want an exposure setting that's different fromthe setting that would normally apply to the image you want to shoot.
1 (In the A/S/M mode)In the top menu, select MODE MENU T CAMERA T A/S/M T A or S.● Set MULTI METERING to OFF in the CAMERA menu (P. 92). When it is set
to ON, AE lock is not available.
2 Compose the picture where you want to lock the metered value(exposure), then press the button.● To cancel AE lock, press the
button again and release it quickly. Ifyou want to lock a different exposure,re-compose the picture and press thebutton again. Each time you press thebutton, lock and cancel are repeated.
● AE lock is canceled T See “TIPS” (P. 95).
AELAEL
95
Chapte
r 5
Metering modes — Metering the subject brightness (Cont.)
3 Place the subject you want to focus on within the AF target mark,then press the Shutter button halfway.● The green lamp lights.
4 Press the Shutter button all the way.● After shooting, AE lock is canceled and AEL disappears.
AEL
During AE lock, AEL is displayed.AE lock cannot be canceled while theshutter button is pressed halfway.
Mode dial & AE lockMode dial AE lock Factory default settingP � –
A/S/M � (M: N/A) –
– –
● How to save the locked Multi-metering exposure after shooting (AEmemory)TAfter step 2 or 3, hold down the button for more than 1
second. MEMO appears. When MEMO appears, the lockedexposure is memorized. To cancel AE memory, press the button and release it quickly.
● If AE lock is not availableTThe menu is on the screen. Quit the menu (P. 47).TThe multi-metering is on. Turn it off (P. 92).
● If AE lock has been canceledTThe mode dial setting has been changed.TYou turned off the camera and turned it on again. However, in the
sleep mode, AE lock is not canceled.TThe spot metering/macro mode, drive mode or flash mode is changed.TYou pressed . The menu is displayed.
TIPS
96
Chapte
r 5
Macro mode shooting — Taking close-up pictures
Allows you to shoot close to the subject (no closer than 0.2 m (0.6 ft)) so thatyou can fill the entire frame with your subject while the zoom lever is pressedto the maximum W position.If the center of the frame (within the AF target mark) is metered when you areclose to the subject and you shoot with the optimal exposure, the picture willturn out well (Spot metering+Macro mode). T See “Spot metering” (P. 91).If you are close to a subject, the picture area in the viewfinder is different fromthe picture that the camera actually records (P. 72). For macro modeshooting, we recommend using the monitor (P. 74).
Control panel
Macro mode
1 Press the button repeatedly until (Macro mode) or (Spot metering+Macro mode) appears on the control panel.
Digital ESP(no indication)
2 Take a picture.
Normal shooting With the macro mode
Mode dial & Spot metering/Macro mode
Mode dial Spot metering/Macro mode Factory default settingP � Digital ESP
A/S/M � Digital ESP� Digital ESP
Supported working rangeNormal (except macro) : 0.8 m to ∞ (2.6 ft to ∞)Macro : 0.2 m to 0.8 m (0.6 ft to 2.6 ft)
97
Chapte
r 5
FUNCTION — Taking black & white orsepia-toned pictures
Lets you add special effect to your pictures during shooting. 4 effects areavailable.
BLACK&WHITE : Takes pictures in black and white.SEPIA : Gives pictures a sepia tone.WHITE BOARD : Pictures are in black and white, with black letters on
white backgrounds emphasized to make them easier to read.
BLACK BOARD : Same as WHITE BOARD, but for white letters on blackbackgrounds. Reverses blacks and whites in the image.
In the top menu, select MODE MENU T CAMERA T FUNCTION TSelect a mode.
Mode dial & Function shooting
Mode dial Function shooting Factory default settingP � OFF
A/S/M � OFF
BLACK&WHITE, SEPIA OFF
● If letters do not show clearly with WHITE BOARD or BLACK BOARDTUse exposure compensation (P. 108).
TIPS
● When WHITE/BLACK BOARD are selected, the flash becomes (Flashoverride mode) (P. 82).
● WB (white balance) and (white balance compensation) cannot beused in Function shooting.
98
Chapte
r 5
1 In the top menu, select MODE MENU T CAMERA T PANORAMA.
2 Press í.● The PANORAMA mode is set.
3 Press the arrow pad to choose at which edge (top/bottom/right/left)you want to connect images.● The chosen edge is displayed.
4 Make sure that the edges of images overlap, then take your pictures.● Focus, exposure and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture. ● Do not adjust the zoom after the first picture. Pictures with differently
sized images cannot be connected.● Panorama shooting is possible for up to 10 pictures.
Panorama shooting
You can take advantage of panorama shooting with Olympus CAMEDIA-brand SmartMedia cards. (Non-Olympus cards do not support this feature.)Panorama shooting lets you connect images with overlapping edges into asingle panoramic image, using the provided CAMEDIA Master software.
For connecting pictures towards the right. For connecting pictures towards the top.
Shutterbutton
Take pictures so that their edges (right/left/top/bottom) overlap.
Shutterbutton
99
Chapte
r 5
Panorama shooting (Cont.)
5 Press to finish panorama shooting.● Frames on the edges of the screen disappear, and the camera returns
to the normal shooting mode.
Mode dial & Panorama mode
Mode dial Panorama mode Factory default settingP � –
A/S/M – –
– –
● During panorama shooting, the flash is disabled.● The Panorama mode is only available with the OLYMPUS CAMEDIA-brand
SmartMedia cards.● The camera itself cannot edit panorama pictures. To connect each picture,
the CAMEDIA Master software is necessary.● Your computer's memory may be insufficient if you take too many panorama
pictures in the HQ/SHQ modes.● Images are saved in JPEG format when panorama shooting is done in the
TIFF mode. The size of the image does not change.● If the mode dial is moved during panorama shooting, the camera cancels
the panorama mode and returns to normal shooting.
100
Chapte
r 5
Recording sound with still pictures
Sound can be recorded when taking still pictures. Recording starts about 0.5seconds after the shutter is released. Total possible recording time per shot isapproximately 4 seconds. When this function is on, sound is recorded everytime you take a picture.
1 In the top menu, select MODE MENU T CAMERA T T ON.
2 Press the shutter button. Whenrecording starts, turn the cameramicrophone towards the subject youwant to record.● The sound recording screen appears.
Mode dial & (for still picture)
Mode dial Factory default settingP � OFF
A/S/M � OFF
– –
● Sound can be added later to still pictures (P. 128).Recorded sound can also be changed.
TIPS
● If the camera is more than 1 meter (3.3ft) away from the subject, soundcannot be recorded clearly.
● It is not possible to take another picture during sound recording.● It is not possible to record sound when TIFF is set. (Sound can be added
later in playback.)● It is not possible to record sound when the Drive mode is set to Sequential
Shooting , , or BKT (Auto bracketing).● Sound recording may also pick up camera noises (e.g. buttons clicking,
shutter movement, etc.).
Microphone
101
Chapte
r 5
Recording sound with movies
Sound can be recorded while shooting a movie. When is ON, Opticalzoom during shooting is not available.
1 In the top menu, select MODE MENU T CAMERA T T ON.
2 Shoot.
Mode dial & (for movie)
Mode dial Factory default settingP – –
A/S/M – –� ON
● Sound cannot be played back on the camera itself. For playback, connectthe camera to a TV with the provided A/V cable (P. 133).
● For movie or sound playback on a computer, Quick Time 4.0 or later isnecessary, in addition to sound capability.
● During shooting with set to ON, focus is locked. When the distance tothe subject varies considerably during shooting, set to OFF beforeshooting.
Adjusting imagequality and
exposure
Chapter 6
103
Record Mode
Chapte
r 6
Choose the best record mode for your purposes (printing, editing on acomputer, web-site editing, etc.). To see how large SmartMedia memorycapacity is under various conditions (such as different resolutions,compressions, or file formats), refer to the table on the following page. Thenumbers in the table are approximate.
Selecting Record Modes
1 In the top menu, select MODE MENUTPICTURET , then pressí. In the mode, select in the top menu.
2 Press Ññ to select the desired record mode (refer to the tablebelow), then press í.
Recordmode
TIFF
SHQ
HQ
SQ1SQ2
Description
The highest-quality mode. Images are saved asuncompressed data, which is the best for printing orimage-processing on a computer. This mode hasdifferent resolutions to choose from, depending onhow it is used.
A high quality mode using the JPEG format.Because the compression rate is very low, highquality images can be stored. In addition, you canincrease the resolution with the Enlarge Sizefunction. This is useful when printing on large papersuch as A3 (11" x 14").
A high quality mode using the JPEG format, withmedium compression. Because the compressionrate is higher than SHQ, file sizes are smaller, somore images can be saved to a card. Like SHQ,resolution can be increased by using the EnlargeSize function.
The most compressed modes. For each one, youcan also choose HIGH (to reduce noise) orNORMAL (to save more images). Select the bestsettings for your purpose (printing, Internet pages,etc.).
Quality
More clear
Normal
File size
Larger
Smaller
104
Record Mode (Cont.)Chapte
r 6 3 Press Ññ to select the resolution (refer to the table below).
● When ENLARGE SIZE is chosen, press í to select the resolution.● When SQ1 or SQ2 is chosen, HIGH or NORMAL can be selected in addition
to the resolution.
Memory capacity in # of shots Record Resolution Compression File format (without sound/with sound)mode 16MB 32MB
2272x1704 1/ – 2/–
2048x1536 1/– 3/–
1600x1200 2/– 5/–
TIFF 1280x960 Uncompressed TIFF 4/– 8/–
1024x768 6/– 13/–
640x480 16/– 33/–
2272x1704 5/5 11/11
SHQ ENLARGE SIZE 3200x2400 Low 2/2 5/5(P. 106) 2816x2112 compression 3/3 7/7
2272x1704 16/15 32/31
HQ ENLARGE SIZE 3200x2400Normal
8/8 16/16(P. 106) 2816x2112 10/10 21/21
2048x1536HIGH 7/7 14/14
NORMALJPEG
20/19 40/39
SQ1 1600x1200HIGH 11/11 23/22
NORMAL 32/30 64/60
1280x960HIGH 18/17 36/34
NORMAL 49/45 99/90
1024x768HIGH 27/26 55/52
SQ2NORMAL 76/66 153/132
640x480HIGH 66/58 132/117
NORMAL 165/124 331/248
*
Still Picture Record Modes
*HIGH uses low compression/NORMAL uses normal compression
The memory capacity listed here is approximate.
Movie Record ModesMemory capacity in sec. per movie
Record Resolution8MB 16MB over
mode Without sound With sound Without sound With sound
HQ 320x240 (15 frames/sec.) 24 23 33 32
SQ 160x120 (15 frames/sec.) 105 93 148 130
105
Record Mode (Cont.)
Chapte
r 64 Press to save the setting.
● The screen returns to the record modesetting screen.
● The record mode you set is displayed onthe control panel.
Record mode
Control panel
● ResolutionThe number of pixels (vertical x horizontal) used when saving an image.If the image will be printed, higher resolutions (larger numbers) arerecommended so that the image will be clearer. However, higherresolutions make the file size (amount of data) larger, so the number ofpictures that can be saved to a card will be fewer.
● Resolution and picture size on a computer screenWhen a picture is transferred to a computer, the size of the picture on thecomputer screen varies depending on the computer's monitor setting.For instance, a picture taken in 640 x 480 resolution is the same size asthe screen if you set the picture to 1x when the monitor setting is 640 x480. However, if the monitor setting is over 640 x 480 (such as 1024 x768), the picture only takes up part of the screen.
● Compression rateIn record modes other than TIFF, image data are compressed. Thehigher the compression rate, the less clear the image.
● File formatThis camera saves images with either TIFF or JPEG formats. In recordmodes other than TIFF, images are compressed in the JPEG format.The compression rate also varies in each mode (TIFF = high quality/largefile size, JPEG = standard or low quality/small file size).
TIPS
Factory default setting for record modesP, A/S/M, : HQ
106
Chapte
r 6
Record Mode (Cont.)
When ENLARGE SIZE is selected (only possible in HQ or SHQ), the actual 4million pixels used by this camera can be increased as if they were approx. 6(2816 x 2112) or approx. 8 (3200 x 2400) million pixels. This allows you tomake quality prints in larger sizes, such as A3 (11" x 14"). However, file sizesalso become larger. ENLARGE SIZE is not available in the (movie) mode.
ENLARGE SIZE
● SmartMedia memory capacity listed in the table is approximate.● The number of storable images differs depending on the Record mode, the
card’s memory size, the Preset print or the Sound recording.● Areas using PAL (P.196) T If movie pictures are shot with the video cable
connected, their maximum recording time may be different from the table onpage 104.
● If the SHQ record mode is set to ENLARGE SIZE, sequential shooting ( ,, BKT) is not possible.
107
ISO Sensitivity
Chapte
r 6The higher the ISO value, the greater the camera’s light sensitivity and the
better its ability to shoot in low-light conditions. However, higher values alsoproduce more “noise” in the resulting images.
In the top menu, select MODE MENU T CAMERA T ISO. There are 4 choices of ISO: AUTO, 100, 200, or 400. Choose the best one foryour shooting conditions.
AUTO : Sensitivity is automatically adjusted according to the lighting conditions and the subject brightness.
100/200/400 : 100 is best when you want to shoot clear, sharp images indaylight. With a higher ISO setting, you can use faster shutter speeds with the same amount of light.
Mode Dial & ISO SensitivityMode dial ISO sensitivity Factory default settingP AUTO/100/200/400 AUTO
A/S/M 100/200/400 100
AUTO/100/200/400 AUTO
ISOThis does not appear duringthe AUTO setting.
Monitor Control panel
ISO
● Higher ISO can produce more noise.● ISO is standardized based on the sensitivity of normal camera film. The
scale is approximate.● When ISO is set to AUTO and you are shooting in dark conditions without a
flash, ISO automatically increases; otherwise the shutter speed will bereduced, possibly resulting in camera movement and blurred images.
108
Exposure CompensationChapte
r 6 This function allows you to make fine changes to the present exposure
setting. In some situations, you may get better results when the exposure thatthe camera sets is compensated (adjusted) manually. You can adjustbetween +/–2.0 in 1/3 steps.
Adjusts towards + (images become brighter)
Adjusts towards – (images become darker) íÉ
– 2.0 + 2.00.0
Mode Dial & Exposure CompensationMode dial Exposure compensation Factory default settingP � 0.0
A/S/M � (except in M) 0.0� 0.0
● Often, white objects (such as snow) will turn out darker than their naturalcolors. Adjusting towards + makes these objects closer to their realshades. For the same reason, adjust towards – when shooting blackobjects.
TIPS
Exposure compensation
Control panel
Choose from four white balance settingsdepending on the type of light:
:Sunlight:Overcast:Tungsten:Fluorescent
You can also try the various tones of color, byselecting the different PRESET WB from theactual light source.
109
White Balance
Chapte
r 6Color reproduction differs depending on the lighting conditions. For instance,
when daylight, the setting sun, or indoor lighting are reflected on white paper,the shade of white produced will be slightly different for each. By setting theWB (white balance), you can achieve more natural-looking color.
PRESET WB
CANCEL SELECT GO
PRESET WB screen
In the top menu, select MODE MENU T PICTURE T WB, then select thebest WB (AUTO, PRESET, ) for your shooting conditions.In the mode, select WB in the top menu.
AUTO (auto white balance)Automatically adjusts the white balance for any light source.
PRESET (preset white balance)
This function is useful when you need more precise white balance thanPRESET WB can give. Point the camera at a white object, such as a piece ofwhite paper, so that the camera can determine the proper white balance forthe shooting conditions.
(One-Touch white balance)
1 In the top menu, select MODEMENUTPICTURETWBT .● The ONE TOUCH WB screen
appears.
ONE TOUCH WB screen
ONE TOUCH WBONE TOUCH WB
CANCELCANCEL
2 Point the camera at a sheet of whitepaper.● Position the paper so that it fills the screen
entirely. Be sure there is no shadow orbackground showing around the paper.
3 Press to store the new whitebalance setting.● To cancel ONE TOUCH WB, pressÉ.
4 Press repeatedly until the menu disappears.
110
White Balance (Cont.)Chapte
r 6
Control panel
White balanceThis does not appear during theAUTO setting.
● Set AUTO for the normal shooting.● When setting the white balance by pointing the camera at white paper, the
setting may be incorrect if the light reflected by the paper is too bright ordark.
● White balance may not be effective under some special light sources.● After setting the white balance, playback the image and check the color on
the monitor.
111
White Balance (Cont.)
Chapte
r 6White Balance Adjustment
This function allows you to make fine changes to the white balance.
In the top menu, select MODE MENU TPICTURE T . The white balance adjustment indicatorappears on the screen.The color becomes bluer each time you pressÑ, and redder each time you press ñ,depending on the original white balanceconditions. Press to save youradjustment.
screen
White balance adjustmentindicator
BLUE
RED
CANCEL ADJUST GO
Mode Dial & White Balance AdjustmentMode dial White balance adjustment Factory default settingP � �0
A/S/M � �0
– –
112
SharpnessChapte
r 6 This function adjusts the sharpness of images.
In the top menu, select MODE MENU T PICTURE T SHARPNESS.Sharpness can be adjusted between +5 and –5 using Ññ.
The outlines of images are more emphasized, and theimages themselves look more vivid, making this idealfor printing.
The outlines of images are softer, making this ideal forediting the images on a computer.
Factory default setting
Mode Dial & Sharpness
Mode dial Sharpness Factory default settingP � �0
A/S/M � �0
– –
● When adjusted too much towards +, noise may appear.
113
Contrast
Chapte
r 6This function adjusts the contrast of images.
For example, images with strong differences in light and shadow can becomemilder, while those with weaker differences can become more vivid.
In the top menu, select MODE MENU T PICTURE T CONTRAST. Contrast can be adjusted between +5 and –5 using Ññ.
Light and shadow are defined more clearly and imageslook crisper.
Images become softer, making this ideal for editingthem on a computer.
Factory default setting
Mode Dial & Contrast
Mode dial Contrast Factory default settingP � �0
A/S/M � �0
– –
114
Noise ReductionChapte
r 6 This function reduces the noise that appears on images during long
exposures. When shooting night scenes, shutter speeds become slower andnoise tends to appear on images. When noise reduction is set to ON, thecamera automatically reduces noise to produce clearer images. However,shooting time is approximately twice as long as usual.Noise reduction can only be used when the shutter speed is set slower than1/2 sec.
In the top menu, select MODE MENU T CAMERA T NOISE REDUCTIONT ON.
● When you set noise reduction to ON, shooting time is approximately twiceas long as usual, because the camera needs extra time to finish the noise-reduction process. During this time, shooting the next picture is notpossible.
● When NOISE REDUCTION is ON, sequential shooting ( , , BKT) isnot possible.
● This function may not work well with some shooting conditions or subjects.
PlaybackThis chapter explains how to play
back still pictures or movies, plus howto use available functions when themode dial is set to (playback).
Chapter 7
116
Chapte
r 7
Playing Back Still Pictures
1 Set the mode dial to (playback).● The monitor turns on and displays the last picture taken.
2 Use the arrow pad to play back other pictures.● The mark is attached to pictures from movies. T See “Playing Back
Movies” on page 118.
Plays back one picture.
Single-Frame Playback
Displays the next picture.
Jumps to the picture 10 frames behind.
Displays the previous picture.
Jumps to the picture 10 frames ahead.
1 Press (monitor button) twice quickly while in the shooting mode.● The monitor turns on and displays the last picture taken.● To play back other pictures, use the arrow pad in the same way as single-
frame playback.
2 To return to shooting, press the shutter button halfway.
This function lets you play back pictures while the camera is in the shootingmode. This is useful when you want to check shooting results quickly. Everypicture and function available in playback mode is also available in QuickView.
Quick View
117
Chapte
r 7
1 Set the mode dial to and display astill picture. Then, press to displaythe top menu.
2 Press Ñ to start the slide-show.
3 Press to stop the slide-show.
Slide-Show
This function displays pictures from the card one after another, as if you arewatching a slide-show. Sound is also played back if it is attached to a picture.However, the camera must be connected to a TV in order to hear the sound.Movies are played back like still pictures, starting from the first frame.
Playback top menu (still pictures)
MODE MENUINFO
● The next picture is not displayed until the sound playback of the previouspicture ends. However, this sound playback cannot be heard unless thecamera is connected to a TV.
● Use of the AC adapter (optional) is recommended when running the slide-show for long periods of time. If batteries are being used, the camera willend the slide-show after about 30 minutes and enter sleep mode.
● The slide-show will not stop until you cancel it by pressing .
118
Chapte
r 7
Playing Back Movies — MOVIE PLAY
1 Set the mode dial to and select a picture attached with byusing the arrow pad.
2 Press to display the top menu.
3 Press Ñ. The card access lamp starts blinking and movie data in thecard is sent to the camera (downloading).● The MOVIE PLAY screen is displayed.
4 Select the item in the MOVIE PLAY screen that you need, then press.
● See the pages above for how to use each item.
This function lets you play back or edit movies.
MODE MENU
MOVIE PLAY
INFO
Playback top menu (movies)
MOVIE PLAYBACK:Plays back movies. TP. 119INDEX:Displays movies as indexes of 9 still frames.TP. 120EDIT:Lets you edit movies. TP. 122
MOVIE PLAY screen
MOVIE PLAYBACK
INDEX
EDIT
MOVIE PLAMOVIE PLAY
CANCEL SELECT GO
● When playing back a movie, download time will vary depending on thelength and record mode of the movie.
119
Chapte
r 7
Playing Back Movies — MOVIE PLAY (Cont.)
Plays back movies.
MOVIE PLAYBACK
1 Follow steps 1-3 on page 118.
2 Press Ññ to select MOVIE PLAYBACK on the MOVIE PLAY screen.
3 Press to start playback.● When the movie finishes playing, the display automatically returns to the first
frame.
4 Press .● The MOVIE PLAYBACK screen is displayed.
5 Press Ññ to select items.
6 Press to start your choice.● When FRAME BY FRAME is selected, follow the instructions below.
� Displaying movies using the arrow padÑ: Displays the beginning of the movie.ñ: Displays the end of the movie.í: Every time you press the button, the next frame appears. The movie can
be displayed continuously by holding the button down.É: Every time you press the button, the previous frame appears. The movie
can be displayed continuously in reverse by holding the button down.: Displays the MOVIE PLAYBACK screen.
PLAYBACK
FRAME BY FRAMEFRAME BY FRAME
EXIT
MOVIE PLAMOVIE PLAYBACK
MOVIE PLAYBACK screen
PLAYBACK:Plays back the entire movie again.FRAME BY FRAME:Plays back the movie manually.EXIT: Leaves the movie playback mode.
120
Playing Back Movies — MOVIE PLAY (Cont.)
Chapte
r 7
Movies can be displayed as indexes of still frames. Indexes can be saved onthe card as still pictures. Indexes are not stored in the same record mode asmovies (see below).
INDEX
Record mode when Record mode when stored as an indexthe movie is shot
HQ SQ (1024x768/HIGH)
SQ SQ (640x480/HIGH)
1 Follow steps 1-3 on page 118.
2 Press Ññ to select INDEX on the MOVIE PLAY screen.● The first-frame selection screen appears.● The card access lamp blinks during
downloading.● " CARD FULL" (P. 190) appears if there
is not enough memory left on the card.
3 Press Éí to select the first frame of the index, then press . ● After the first frame is selected, the selection frame moves to the last
frame of the index.
� Using the arrow padÑ: Jumps to the first frame of the movie.ñ: Jumps to the last frame of the movie.í: Each press of the button displays the next frame. Movies are played by
holding the button down.É: Each press of the button displays the previous frame. Movies are played
in reverse by holding the button down.
GO
Elapsed time / Total time
First-frame selection screen
121
Chapte
r 7
Playing Back Movies — MOVIE PLAY (Cont.)
4 Select the last frame of the indexusing the arrow pad (See step 3).
5 Press .● INDEX screen appears.
6 Press Ññ to select items.
7 Press to run your choice.
OK:Saves the index on the card. The menudisappears from the screen.RESET:Resets the index. Returns to the first-frameselection screen.CANCEL:Cancels the index. Returns to the MOVIEPLAY screen.
GO
Last-frame selection screen
INDEX screen
O K
CANCELCANCEL
RESET
INDEXINDEX
● INDEX is not available when the card is protected or when “ CARDFULL” appears (indicating insufficient memory).
122
Playing Back Movies — MOVIE PLAY (Cont.)
Chapte
r 7
This function allows you to edit movies by erasing parts you do not want.
EDIT
1 Follow steps 1-3 on page 118.
2 Press Ññ to select EDIT on the MOVIE PLAY screen.● The first-frame selection screen appears.● The card access lamp blinks during
downloading.● " CARD FULL" (P. 190) appears if there
is not enough memory left on the card.
3 Press Éí to select the first frame of the movie, then press . ● After the first frame is selected, the selection frame moves to the last
frame of the movie.
� Using the arrow padÑ: Jumps to the first frame of the movie.ñ: Jumps to the last frame of the movie.í: Each press of the button displays the next frame. Movies are played
by holding the button down.É: Each press of the button displays the previous frame. Movies are
played in reverse by holding the button down.
4 Select the last frame of the movie byusing the arrow pad. (See step 3)
GO
First-frame selection screen
GO
Last-frame selection screen
123
Chapte
r 7
Playing Back Movies — MOVIE PLAY (Cont.)
● EDIT is not available when the card is protected or when “ CARD FULL”appears (indicating insufficient memory).
● NEW FILE is not available when the card does not have enough memory.
5 Press .● EDIT screen appears.
6 Press Ññ to select items.
7 Press to run your choice.
OK:Selects NEW FILE or OVERWRITE.* NEW FILE saves the edited movie as a new
movie with a different file name.* OVERWRITE saves the edited movie with
the original file name. The original moviewill be erased.
RESET:Resets EDIT. Returns to the first-frameselection screen.CANCEL:Cancels EDIT. Returns to the MOVIE PLAYscreen.
EDIT screen
O K
CANCELCANCEL
RESET
EDITEDIT
124
Chapte
r 7
Displaying Shooting Information
This function lets you select how much shooting information is on the monitorin the playback mode. When it is set to OFF, only a small amount ofinformation is displayed. For details on each piece of information displayed,see pages 19 and 20.
1 Press to display the top menu.
2 Pressing É turns INFO on and displays the full amount of shootinginformation on the monitor.● To turn INFO off, bring up the top menu and press again.
MODE MENUINFO
Playback top menu (still pictures)
HQ
’01.12.23. 21:56 6453
x10
HQSIZE: 2272x1704F2.0 1/800 +2.0
ISO400’01.12.23 21:56FILE: 123–3456
x10
When INFO is OFF When INFO is ON
125
Chapte
r 7
Close-up Playback
● How to return the picture to the original size (1x)TTurn the zoom lever to W.
● How to display another pictureTTurn the zoom lever to W to return to 1x, then select the desired
picture by using the arrow pad.
TIPS
Pictures displayed on the monitor can be enlarged. Each time you turn thezoom lever towards T, pictures are enlarged by 1.5, 2, 2.5, 3, 3.5 or 4 times.
1 With the arrow pad, select the picture you want to enlarge. ● Pictures with the mark cannot be enlarged.
2 Turn the zoom lever toward T ( ).● When a picture is enlarged, ß/å/˙/¥ are displayed. Press the arrow
corresponding to the direction you want to view. The enlarged picture isshifted in the desired direction, allowing you to view a different portion ofthe image.
126
Chapte
r 7
Index Display
This function lets you show many pictures at the same time on the monitor. Itis useful for comparing your pictures and choosing the best ones. Thenumber of pictures shown can be 4, 9, or 16 (see the next page).
In the single-frame playbackmode (P. 116), press thezoom lever to W ( ).
Pictures, including the one displayedin the single-frame playback mode,appear in the index display.
Index display (9-frame)
� How to use the arrow pad during an index display
É: Moves to the previous frame.í: Moves to the next frame.Ñ: Jumps to the previous index display
(the frames before the top left frame).ñ: Jumps to the next index display (the
frames following the bottom right frame).
127
Chapte
r 7
Index Display (Cont.)
● How to view a full-size picture from the indexTSelect the picture with the arrow pad, then press the zoom lever
toward T.
TIPS
This function lets you change the number of pictures in an index display.
Selecting the Number of Pictures
1 In the top menu, select MODE MENU T SETUP T .
2 Choose the number of pictures (4, 9 or16) and press .
Index display (4-frame)
128
Chapte
r 7
Adding Sound
Sound can be added to still pictures after you take them. You can alsochange sound that has already been recorded. Recording sound takesapprox. 4 seconds for each picture.
1 Select a still picture to add sound to by using the arrow pad. ● Sound cannot be added to pictures with the mark.
2 In the top menu, select MODE MENU T PLAY T .
3 Press í to display START.
4 Point the camera microphone towards the subject, then press tostart recording.● A bar is displayed to show the progress of recording.
Built-in microphone
● To obtain the optimum sound, the microphone should be placed no furtherthan 1m (3.3 ft) away from the subject.
● When a new sound is recorded, the original sound is erased.● function is not available when the card is protected or when “ CARD
FULL” appears (indicating there is no memory left).● Sound may not be recorded when a card has insufficient memory.● Sound recording may also pick up camera noises (e.g. buttons clicking,
shutter movement, etc.).● After being added, sound cannot be erased from pictures. However, you
can replace the sound with silence by doing the above steps again whilekeeping quiet.
129
Chapte
r 7
Protect
Pressing the button in the mode protects pictures from being erasedaccidentally.
1 Display the picture you want to protect by using the arrow pad.
2 Press . The picture is now protected.● To cancel protection, press again.
Displayed when a picture is protected.
HQ
’01.12.23. 21:56 24
● Protected pictures cannot be deleted with the ALL ERASE (all-frameerase) function, but they can be deleted with the FORMAT (format)function.
● Protection cannot be applied to pictures stored on a card with a write-protect adhesive seal.
● Pictures cannot be protected while being played back on a TV.
130
Chapte
r 7
Erasing Pictures
Recorded pictures can also be erased. This can be done either one frame ata time or to all the pictures in the card.
● Pictures in a card with a write-protect seal cannot be erased.● Once erased, pictures cannot be brought back.
1 Select a picture you wish to erase by using the arrow pad.● If the picture is protected, cancel the protection (P. 129).
2 Press the (erase) button.● The ERASE screen is displayed.
3 Press Ñ to select YES.
4 Press to erase the picture.
● To cancel erasing, select NO in step 3 and press , or press the buttonagain.
This function only erases the picture displayed on the monitor. Erasing furtherpictures must be done one-by-one if using this function.
Single-Frame Erase
ERASE
YESYES
N O
SELECT GO
ERASE screen
131
Chapte
r 7
Erasing Pictures (Cont.)
1 In the top menu, select MODE MENU T CARD T CARD SETUP T
ALL ERASE.
2 Press .● The ALL ERASE screen is displayed.
3 Press Ñ to select YES.
4 Press to start erasing.● A bar is displayed to show the progress of
erasing.● To cancel erasing, select NO in step 3 and
press .
This function erases all still pictures and movies in the card, except protectedones (P. 129).
All-Frame Erase
ALL ERASE screen
ALL ERASE
YESYES
N O
SELECT GO
Screen during erasing
132
Chapte
r 7
Formatting Cards
Cards must be formatted. Formatting prepares cards to receive data.Olympus CAMEDIA-brand cards are highly recommended. If you are going touse non-OLYMPUS cards or cards formatted by other devices such as acomputer, you must format them with the camera before use. Cards can beformatted in all mode dial positions.
1 In the top menu, select MODE MENU T CARD T CARD SETUP T
FORMAT.
2 Press .● The FORMAT screen is displayed.
3 Press Ñ to select YES.
4 Press to start formatting.● A bar is displayed to show the progress of
formatting.● To cancel formatting, select NO in step 3
and press .
FORMAT screen
FORMAT
YES
NO
Screen during formatting
● All existing data stored on the card is erased when the card is formatted.Make sure that you save or transfer important data before formatting a usedcard.
● Recording time may be longer with non-OLYMPUS cards and computer-formatted cards. In such cases, re-formatting with the camera isrecommended.
● Cards with a write-protect seal cannot be formatted.
133
Chapte
r 7
Playback on a TV
With the provided AV cable, recorded images and sound can be played backon a TV.
1 Make sure that the TV and camera power are off .
2 Connect the camera to the TV using the AV cable.
3 Set the mode dial to and turn on the TV. Switch the TV to videoinput.● For details on switching to video input, refer to your TV's instruction
manual.
4 Select an image by using the arrow pad.● The selected image will be displayed on the TV.
Connect to the TV's video input (yellow)and audio input (white) terminals.
AV cable
Connect to the A/V OUT jack (black).
● The optional AC adapter is recommended when using the camerawith a TV.
● Images can be rotated only when they are played back on a TV. Seethe next page for details.
● Video signal is either NTSC or PAL compatible depending on thestandard in the intended area of distribution.
TIPS
● The camera monitor turns off automatically when the camera is connectedto a TV.
● The image may appear off-center on the TV screen. This is due to the TV'sadjustment settings.
● Your TV may put a black frame around the picture. This is normal.
134
Chapte
r 7
Playback on a TV (Cont.)
There may be times when you want to rotate a picture. For example, picturestaken with the camera held vertically are also oriented vertically (i.e. longervertically than horizontally). With picture rotation, you can turn themhorizontally, 90 degrees clockwise, or counter-clockwise.Pictures can be rotated only when they are played back on a TV.
1 Display a verticallyoriented picture inthe single-frameplayback mode (P.116).
2 Each time thebutton is
pressed, thepicture is rotatedas shown.
Normal playbackof a verticallyoriented picture
Picture rotated 90°counter-clockwisefrom normalplayback position
Picture rotated 90°clockwise fromnormal playbackposition
HQ
’01.12.23. 21:56 24
● Movie pictures cannot be rotated.● New picture positions are saved even when the power is turned off.● Close-up playback is possible after pictures are rotated. However, pictures
cannot be rotated while in close-up playback (P. 125).● The following pictures cannot be rotated:
Protected pictures; Pictures in a card with a write-protect seal; Picturestaken with other cameras.
Picture Rotation
Useful FunctionsThis chapter explains various useful
camera functions. Also see “Using theMenu” in Chapter 3.
Chapter 8
136
Chapte
r 8
Custom Button
Menu items listed in the table below can be setto the custom button on the camera. This makesit easy to jump to frequently-used functions bypressing only one button. The factory defaultsetting is “AE LOCK”.
Custom button
Available Menu Items
Items Settings
AE LOCK (P. 94) –(factory default setting)
Drive mode (P. 88) (Single-frame), (Sequential), (AF Sequential),
(Self-timer/remote control), BKT
ISO sensitivity (P. 107) AUTO, 100, 200, 400
A/S/M (P. 61 – 63) A, S, M
Flash selection IN+ (main+external), (external only)(P. 176, 177)
Slow synchronization SLOW1, SLOW, SLOW2(P.83)
Noise reduction (P.114) OFF, ON
Digital zoom (P. 79) OFF, ON
Fulltime auto focus (P. 69) OFF, ON
Auto focus mode (P. 68) iESP, SPOT
Sound recording OFF, ON(still pictures) (P.100)
Function (P. 97) OFF, BLACK&WHITE, SEPIA, WHITE BOARD, BLACK BOARD
Record mode (P. 103) TIFF, SHQ, HQ, SQ1, SQ2
White balance (P. 109) AUTO, (daylight), (overcast), (tungsten light), (fluorescent)
One-Touch –white balance (P. 109)
137
Chapte
r 8
Custom Button (Cont.)
Setting the Custom Button
1 In the top menu, select MODE MENUT SETUP T CUSTOM BUTTON. Pressí.● The CUSTOM BUTTON screen appears.
2 Select the function you want by usingÑñ, then press to save yoursetting.
AE LOCKDRIVE
ISOA/S/M
CUSTOM BUTTON
CUSTOM BUTTON screen
Using the Custom Button
1 Press (custom button).● The function currently set to the custom button appears.
2 Press repeatedly until the setting within the functionchanges to the one you want.
Ex: When FULLTIME AF is set to the custom button.
Press thisbutton.
Press toselect ON or OFF.
FULLTIME AF ONFULLTIME AF OFF
138
Chapte
r 8
Custom Button (Cont.)
Mode Dial & Custom ButtonMode dial Custom button Factory default settingP � AE LOCK
A/S/M � AE LOCK
– –
● Using AE LOCK after setting a different function to the custombutton.TAE lock cannot be used when a different function is set to the custom
button. Re-set AE LOCK to the custom button by following “Setting theCustom Button” on page 137.
TIPS
● The custom button cannot be set separately for each shooting mode.
139
Chapte
r 8
Shortcut
Functions on the top menu other thanMODE MENU can be replaced withthose listed in the table below. This isuseful when you want to quickly go tofrequently-used functions.
Available Menu Items
Items Settings
Drive mode (P. 88) (Single-frame), (Sequential), (AF Sequential),
(Self-timer/remote control), BKT
ISO sensitivity (P. 107) AUTO, 100, 200, 400
A/S/M (P. 61 – 63) A, S, M
Flash adjustment (P. 86) +2 - �0 - –2
Flash selection IN+ (main+external), (external only)(P. 176, 177)
Slow synchronization SLOW1, SLOW, SLOW2(P. 83)
Noise reduction (P. 114) OFF, ON
Multi-metering (P. 92) OFF, ON
Digital zoom (P. 79) OFF, ON
Fulltime auto focus (P. 69) OFF, ON
Auto focus mode (P. 68) iESP, SPOT
Sound recording OFF, ON(still pictures) (P. 100)
Panorama (P. 98) –
Function (P. 97) OFF, BLACK&WHITE, SEPIA, WHITE BOARD, BLACK BOARD
Record mode (P. 103) TIFF, SHQ, HQ, SQ1, SQ2
White balance (P. 109) AUTO, PRESET, (One-Touch)
White balance BLUE - �0 - REDcorrection (P. 111)
Sharpness (P. 112) +5 - �0 - –5
Contrast (P. 113) +5 - �0 - –5
DRIVE
WB
MODE MENU
Shortcut menu
140
Chapte
r 8
Shortcut (Cont.)
Setting the Shortcut Menu
1 In the top menu, select MODE MENUT SETUP T SHORT CUT. Press í.● The SHORT CUT screen appears.
2 Select A, then press í to display themenu functions on page 139.● A, B, and C on the monitor are the same
as top, left, and bottom on the top menu.
3 Select the item you want by pressing Ññ, then press to saveyour setting.● Repeat Steps 2 and 3 to set B and C.
SHORSHORT CUTT CUTA DRIVEDRIVE
WBWBBC
SELECT GO
SHORT CUT screen
A
B
C
MODE MENU
141
Chapte
r 8
Shortcut (Cont.)
Using the Shortcut Menu
1 Press to display the top menu.● The shortcut menu you set before is shown on the top menu.
2 Press the arrow pad according to the arrow (˙ߥ) shown next toeach item.● The monitor jumps directly to the setting screen of that item.
DIGITAL ZOOM
WB
MODE MENU
Ex: When DIGITAL ZOOM is set to the A shortcut.
Press thisbutton.
Pressing Ñ takes you directly tothe DIGITAL ZOOM setting screen.
Mode Dial & Shortcut MenuMode dial Shortcut menu Factory default setting
P �
A/S/M �
– –
A: DRIVEB: C: WB
CAME
RAPI
CSE
TCA
RDNOISE REDUCTIONNOISE REDUCTIONMULMULTI METERINGTI METERINGDIGITDIGITAL ZOOMAL ZOOM
SLOWSLOW
FULLFULLTIME AFTIME AFOFFON
● The shortcut menu cannot be set separately for each shooting mode.
142
Chapte
r 8
Self-Timer Shooting
This function is useful for taking pictures that the shooter wants to be in too.This can also be done with remote-control shooting.
1 Use a tripod to stabilize the camera.
2 In the top menu, select MODE MENUT CAMERA T DRIVE T , thenpress (in the mode,select MODE MENU T CAMERA T
T ON, then press ).
● appears on the control panel.
3 Press the shutter button fully to startself-timer shooting.● The self-timer/remote control lamp on the
front of the camera lights up for approx. 10seconds, then starts blinking. After blinkingfor approx. 2 seconds, the picture is taken.(In the mode, recording starts.)
● To stop shooting while in the mode,press the shutter button fully again.
Self-timer/remote control lamp
Self-timer/remote control
● To stop the self-timer, press . The self-timer/remote control lampwill turn off.
TIPS
● The self-timer mode is canceled after the picture is taken even if OFF isselected in All Reset (P. 143).
● In the mode, the camera automatically stops shooting when it goes overthe maximum recording time for one shot.
● In the P and A/S/M modes, only single-frame shooting is possible with theself-timer. Sequential shooting is not available.
Control panel
143
Chapte
r 8
All Reset
This function lets you choose whether or not the camera saves its currentsettings. There are three options:
� OFFThe settings just before the power is turned off are saved.� ONThe factory default settings come back when the power is turned off.� CUSTOMYour favorite settings are saved as “Custom Settings”. When the power isturned off, these custom settings are saved.
The settings that All Reset affects are listed on P. 145.
1 In the top menu, select MODE MENUT SETUP T ALL RESET.● The All Reset setting screen appears.
2 Select OFF, ON, or CUSTOM, then press .When selecting CUSTOM, press í to display the CUSTOM screen.● The CUSTOM screen appears T Go to Step 3.
3 Select the functions you want by using Ññ, then press í.
4 Select the setting within the function by using Ññ, then press .
5 Repeat Steps 3 and 4 to change other functions.
CUSTOMCUSTOM
OFFON
SETU
PCA
MCA
RDPI
C
REC VIEWREC VIEWFILE NAME
ALL RESET
PIXEL MAPPINGPIXEL MAPPING
All Reset setting screen
144
Chapte
r 8
All Reset (Cont.)
CUSTOMCUSTOMFNo
SHUTTER
LCD OFFZOOM
Ex: When setting the aperture on the CUSTOM screen.
CUSTOM screen
Press í to go to theaperture setting screen.
CUSTOMCUSTOMFNoFNo
SHUTTER
LCDZOOM
Increases the value
Decreases the value
Press to save the setting.The monitor then returns tothe previous screen.
145
Chapte
r 8
All Reset (Cont.)
Available Items and Factory Default Settings
*1 This sets the Monitor’s ON/OFF when the camera is turned on. *2 Zoom position is selected from 35mm/55mm/80mm/105mm when the camera is
turned on (these numbers are based on a 35mm camera).
SettingFactory default
setting
Noise reductionOFF(P. 114)
Multi-metering (P. 92) OFF
Digital zoom (P. 79) OFF
Fulltime auto focusOFF(P. 69)
Auto focus methodiESP(P. 68)
Sound recording OFF(still pictures) (P. 100)
Sound recordingON(movies) (P. 101)
Function (P. 97) OFF
Record modeHQ(still pictures) (P. 104)
Record modeHQ(movies) (P. 104)
White balance (P. 109) AUTO
White balance ±0correction (P. 111)
Sharpness (P. 112) ±0
Contrast (P. 113) ±0
SettingFactory default
setting
Aperture (P. 61) F1.8
Shutter speed (P. 62) 1/800
Exposure compensation (P. 108) ±0
LCD*1 OFF
Zoom*2 35mm
Flash mode (P. 84) AUTO
Spot/Macro (P. 91) OFF
Drive (P. 88)
Auto/manual focus AF(P. 70)
ISO sensitivityAUTO(P. 107)
A/S/M (P. 61 – 63) A
Flash adjustment±0(P. 86)
Flash selection IN+(P. 176, 177) (main+
extension)
Slow synchronization SLOW1(P. 83)
146
Chapte
r 8
Beep
You can set the volume of the beep used for button operations or warnings toOFF, LOW or HIGH. The factory default setting is LOW, but you can turn thebeep completely off if you don't want it.
1 In the top menu, select MODE MENUT SETUP T .● The beep setting screen appears.
2 Select OFF, LOW, or HIGH, then press .
HIGH
OFFLOW
SETU
PCA
MCA
RD
REC VIEWREC VIEWFILE NAME
ALL RESET
PIXEL MAPPINGPIXEL MAPPING
Beep setting screen
Rec View
You can choose if the image being recorded is displayed on the monitorduring shooting.
� ONThe image being recorded onto the card is displayed on the monitor. This isuseful for a brief check of images you have just taken. Pressing the shutterbutton halfway at any time displays the image the camera is currently aimed at.� OFFThe image being recorded onto the card is not displayed. If you shoot whileusing the monitor, the subject the camera is pointing at will be displayed. Thisis useful when you want to prepare your next shot while the previous image isbeing recorded.
In the top menu, select MODE MENU T SETUP T REC VIEW T ON orOFF.
● If you shoot with the monitor off and battery power is too low, Rec View isnot available.
147
Chapte
r 8
File Name
The camera automatically creates file names and folder names for images tobe stored in. Files can be numbered from 0001 to 9999 and folders can benumbered from 100 to 999. Examples are shown below.
● Month: Jan. - Sep. = 1 - 9, Oct. = A, Nov. = B, Dec. = C
There are two choices here: RESET or AUTO. Choose the one that is best foryou when transferring images to a computer.
� RESETWhen RESET is selected, the file number and folder number are reset everytime a new card is inserted in the camera. The folder number returns to No.100, and the file number returns to No. 0001. This is useful when groupingfiles on separate cards.� AUTOWhen AUTO is selected, the same folder number is retained, but the filenumber continues from the previous card, so that the same file number is notused on different cards. This helps you to manage multiple cards. This isuseful when a group of files stretches over more than one card.
1 In the top menu, select MODE MENUT SETUP T FILE NAME.● The FILE NAME setting screen appears.
2 Select RESET or AUTO, then press .
RESETAUTOSE
TUP
CAM
CARD
PIC
REC VIEWREC VIEWFILE NAME
ALL RESET
PIXEL MAPPINGPIXEL MAPPING
FILE NAME setting screen
148
Chapte
r 8
File Name (Cont.)
● When the File No. reaches 9999...The file number returns to 0001, and the folder number changes, forexample, from No. 100 to No. 101.
● When the both Folder/File No. reach each maximum number(999/9999)...The number of storable pictures becomes 0, even if the card is not fullyet. No more pictures can be taken.
TIPS
Pixel Mapping
The Pixel Mapping feature allows the camera to check a CCD and imageprocessing circuit automatically. It is not necessary to operate this functionfrequently. Approximately once a year is recommended. Wait a few minutesafter the monitor is used or continuous shots are taken to allow for properperformance of the Pixel Mapping function.
1 In the top menu, select MODE MENUT SETUP T PIXEL MAPPING.
2 Press í.● START appears.
SETU
PCA
MCA
RDPI
C LOWLOW
ONON
ONON
RESETRESETREC VIEWREC VIEW
FILE NAMEPIXEL MAPPINGPIXEL MAPPING
ALL RESET
SETU
PCA
MCA
RDPI
C
REC VIEWREC VIEWFILE NAMEPIXEL MAPPINGPIXEL MAPPING
ALL RESET
START
149
Chapte
r 8
Pixel Mapping (Cont.)
Measurement Units: m/ft (meters/feet)
Measurement units can be selected from either meters or feet in the manualfocus mode. (P. 70) At close ranges, the camera replaces meters/feet with centimeters/inches.
1 In the top menu, select MODE MENUT SETUP T m/ft.● The m/ft setting screen appears.
2 Select “m” or “ft”, then press .
SETU
PCA
MCA
RDPI
C
CUSTOM BUTTONCUSTOM BUTTONSHORT CUT
m/ftm/ft mft
M/ft setting screen
3 Press .● A progress bar appears during Pixel
Mapping.● When Pixel Mapping is finished, the
screen returns to normal.
● If the power is turned off during Pixel Mapping, start again from Step 1.
Print settingPrint reserve prepares pictures you
have taken with the camera forprinting at a photo lab or on your
printer.
Chapter 9
151
How to print pictures
Chapte
r 9When you want to print out pictures that you have taken with this camera and
stored on a card, perform Print Reserve (P. 153 – 158). Print Reserve allowsyou to save printing data (number of prints, date printed on pictures, etc.) withthe pictures stored on the card. Several different printing options areavailable:
� Printing at a photo lab that supports DPOF or printing on a DPOFcompatible printerWhat is DPOF? DPOF is short for Digital Print Order Format. DPOF is a format used torecord automatic print information from cameras. By specifying whichimages are to be printed, the images can be printed easily by DPOF-compatible printing service labs or a personal DPOF-compatible printer.
� Printing on an Olympus CAMEDIA P-400, P-330N(E) or P-200 digitalprinterIf you insert a card with Print Reserve data into the printer, printing ispossible without using a computer. For more details, refer to the printer’sinstructions.
� Transferring pictures to a computer (P. 161 – 173) and printing themfrom a printer connected to the computerAlso refer to the application software's instructions.
● Picture size and printingThe resolution of a computer/printer is generally based on the number ofdots (pixels) per square inch. This is called “dpi” (dots per inch). Thehigher the dpi value, the higher the resolution, and the better the printedresults. Keep in mind, however, that the dpi of the picture you want toprint does not change to match the printer resolution. This means thatwhen you print an image with a lower resolution than the printer, the sizeof the printed picture will be smaller. Although you can print magnifiedimages, picture quality will decrease. If you want to be able to print large,high-quality pictures, set the picture size in the camera as high aspossible (higher record mode) (P. 103).
TIPS
152
How to print pictures (Cont.)Chapte
r 9
● Images taken with this camera can also be printed using a printer or at aphoto lab that supports the Design rule for Camera File system/DCF.
● DPOF reservations set by another device cannot be changed by thiscamera. Make changes using the original device.
● If a card contains DPOF reservations set by another device, enteringreservations using this camera may overwrite the previous reservations.
● Even if an image appears with the message “PICTURE ERROR”, Printreserve may be performed on it. In such a case, the print reserve icon ( )does not appear where an image is displayed for full view. Since appearswhere multiple images are displayed (index-display mode), it is possible toconfirm the print reserve status.
● This camera cannot be directly connected to printers such as the OlympusP-300 digital printer.
● Not all functions may be available on all printers or at all photo labs.● If you are printing using the P-330N(E) , only the first 999 images can be
printed.● Print reserve may take considerable time in some cases.● Print reserve cannot be done when using a card with a write-protect seal.
153
All-frame Print Reserve
Chapte
r 9
1 Set the mode dial to to display a still picture.● Pictures with cannot be printed out.
2 Press the button to display the PRINT ORDER screen.
EXITEXIT SELECTSELECT GOGO
PRINT ORDER SETTINGPRINT ORDER SETTINGPRINT ORDEREDPRINT ORDERED
RESET
KEEPKEEP
EXITEXIT SELECTSELECT GOGO
PRINT ORDER PRINT ORDER
If Print Reserve data is alreadystored on the card, the PRINTORDER SETTING screen appearsgiving you the choice of resettingthe data or keeping it (P. 159).
Select .
3 Select x (number of prints) or (date/time) by pressing Ñ or ñ,then press í to set the numbers.
SETSETSELECTSELECT GOGO
0DADATETE
0
EXITEXIT SELECTSELECT GOGO
EXITEXIT SELECTSELECT GOGO
NODADATETETIMETIME
When selecting x
When selecting
Increases the number.
Decreases the number.
Select DATE or TIME.
4 After all settings are complete, press . ● The screen exits from the Print Reserve mode. ● The Playback mode is restored and the Print Reserve mark and number
of prints are displayed.
154
Chapte
r 9
Single-frame print reserve
1 Display a still picture you want to print.● Pictures with cannot be printed out.
2 Press the button to display the PRINT ORDER screen.
EXITEXIT SELECTSELECT GOGO
PRINT ORDER SETTINGPRINT ORDER SETTINGPRINT ORDEREDPRINT ORDERED
RESET
KEEPKEEP
EXITEXIT SELECTSELECT GOGO
PRINT ORDER PRINT ORDER
If Print Reserve data is alreadystored on the card, the PRINTORDER SETTING screen appearsgiving you the choice of resettingthe data or keeping it (P. 159).
Select .
HQ
’01.12.23. 21:56 24
x10
ORDEREXIT
When selecting a frame forPrint Reserve
3 Select a frame you want to print using single-frame playback (P. 116)or index display (P. 126).
SETSETSELECTSELECT GOGO
0DADATETENONO
155
Single-frame print reserve (Cont.)
Chapte
r 94 Press .
● The screen appears.
Select x (number of prints)or (date/time).
Increases the number.
Decreases the number.
To “Trimming setting”(P. 156).
DADATETETIMETIME
N O
EXITEXIT SELECTSELECT GOGO
5 To save the setting, press to exit from the selection screen.● To perform Print Reserve for more pictures, repeat steps 3 – 5.
6 Press the button twice. ● The screen exits from the Print Reserve mode. The playback mode is
restored. ● Make sure that the Print Reserve mark, number of prints and date/time
are displayed.
1 Do steps 1 – 4 of“ S i n g l e - f r a m eprint reserve”. Instep 4, select (P. 154, 155).
156
Chapte
r 9
Trimming setting
It is possible to enlarge a part of a recorded picture and to print out theenlarged section only.
If has been set already, the screenappears. Select RESET and press .● If you select OK or CANCEL, then press ,
the screen returns to the screen, which isdisplayed in step 4 on P. 155.To save the current trimming size T OKTo set a new trimming size T RESETTo cancel the trimming size T CANCEL
If is not set on the desired picture, ascreen appears giving you the choice ofsetting trimming (SETUP) or cancelingtrimming (CANCEL).
CANCEL
RESET
O KCANCEL
SETUP
2 The trim screen appears. Set the top left corner point of the desiredpicture. Move the vertical and horizontal lines using one of thefollowing methods:
When the zoom lever is moved toward W, the intersectionpoint (green) moves toward the top left corner of the display.
When the zoom lever is moved toward T, the intersection point(green) moves toward the bottom right corner of the display.
When the lever is moved, frame lines(white) appear on opposite sides from thetrimming lines (green).
Moves the horizontal line up.
Moves the verticalline to the right.
Moves the horizontal line down.
Moves the verticalline to the left.
157
Trimming setting (Cont.)
Chapte
r 93 Press to save the top left corner point.
4 The screen changes to the one for setting the bottom right cornerpoint. The methods for moving the vertical and horizontal lines arethe same as described in step 2.● To change the top left corner point, press the button.
When the lever is moved, framelines (white) appear on oppositesides from the trimming lines(green).
When the zoom lever is moved toward W, the intersection point(green) moves toward the top left corner of the display.
When the zoom lever is moved toward T, the intersection point(green) moves toward the bottom right corner of the display.
5 Press to save the bottom rightcorner point. ● The trimming size is displayed for
approx. 1 second.
6 Select OK on the screen, which is displayed in step 1. ● The screen returns to the screen.
CANCEL
RESET
O K
158
Trimming setting (Cont.)Chapte
r 9 7 To save the setting, press twice to exit from the selection screen.
8 Press the button twice. ● The screen exits from the Print Reserve mode to return to the playback
mode.
● The size of the printed picture varies depending on the printer setting. If thetrimmed picture size is small, printing magnification increases accordingly,resulting in a printed picture with lower resolution.
● For best results with close-up prints, it is recommended to use the TIFF,SHQ or HQ mode.
● The vertical to horizontal ratio in the trimming screen can be changed usingthe Arrow pad, but if the zoom lever is used, the ratio is fixed at 4:3.
Resetting Print Reserve
159
Resetting Print Reserve
Chapte
r 9
1 Display a still picture.
2 Press the button to display the PRINT ORDER SETTING screen. ● If Print Reserve data is NOT stored on the card, the PRINT ORDER
SETTING screen does not appear.
3 Select RESET.
� Remove selected pictures onlySelect KEEP, then set the number ofprints to 0 on the (single-frame printreserve) screen.
4 To save the setting, press to exit from the selection screen.
5 Press the button twice.
Allows you to reset all Print Reserve settings for pictures stored on a card.
EXIT SELECT GO
PRINT ORDER SETTINGPRINT ORDERED
RESET
KEEPKEEP
EXIT SELECT GO
x 0
Transferringpictures to a
computerPictures stored on the card can also
be viewed on a computer. This chapter shows you how to
transfer pictures to a computer forviewing and image processing.
Chapter 10
161
Connecting directly to a computer bycable
Chapte
r 10How to connect to a computer by USB cable depends on the OS your
computer is running. Consult the manufacturer of your computer for details ofits operating environment.
Identification of running OS (Windows 98/98SE, Windows 2000 Professional/Me, Mac OS 9.0 - 9.1)
Windows 98/98SEWindows 2000
Professional/Me Mac OS 9.0 - 9.1
� � �
�
Connecting USB cable (P.162, 163)
�
� �
Installing USB driver (P.164, 165)
Transferring images to a computer -Downloading(P.166, 167)
Transferring images to a computer -Downloading (P.168, 169)
� � �
Removing the card (P.170) Removing the card (P.171)
� � �
� � �
Even if your computer has a USB connector, data transfer may not function correctly if youare using one of the operating systems listed below or if you have an add-on USBconnector (extension card, etc.).● Windows 95/NT 4.0● Windows 98 upgrade from Windows 95● Mac OS 8.6 or lower (except Mac OS 8.6 equipped with USB MASS Storage support
1.3.5 installed at the factory)● Data transfer is not guaranteed on a homemade PC system.
Disconnecting the cable (P.172)
162
Connecting directly to a computer bycable (Cont.)
Chapte
r 10
● When connecting the camera to a computer, make sure that the remainingbattery power is sufficient. When connected (transmitting) to a computer,the camera does not enter the Sleep (power save) mode nor will thecamera’s power turn off automatically. If the battery power runs out whilethe computer is reading data from the card loaded in the camera, thecamera stops operating and downloaded image data (file) will be lost. Usethe AC adapter (optional) when downloading files.
● Make sure that the camera's power is off before connecting the AC adapter.● Before removing the AC adapter, disconnect the camera from the computer,
and make sure that the camera's power is off.● To avoid computer malfunctions, do not turn off the camera or switch the
camera’s mode dial position when the camera is connected to a personalcomputer.
● If the camera is connected to the personal computer via a USB hub,operation may not be stable if there are any compatibility problems betweenthe personal computer and the hub. In such a case, do not use a hub andconnect the camera directly to the personal computer.
● To play back movies, the personal computer should have QuickTimeinstalled on it.
To connect the camera to a personal computer, use the USB cable(provided).
How to connect
Personal computer
USB cable
Camera’s USB connector
1 Turn off the camera's power, then insert the card containing imagefiles to be transferred to the computer.
2 Open the camera’s connector cover.
163
Connecting directly to a computer bycable (Cont.)
Chapte
r 103 Connect the end of the USB cable marked A to the USB connector
on the personal computer.
4 Connect the end of the USB cable marked B to the USB connectoron the camera.
5 Set the mode dial to .● The computer recognizes the camera as a new device, then installs the
USB driver. The next time you connect, the message below will notappear. The computer will recognize the camera automatically.
● When using Windows 2000 Professional/Me: The USB driver will be automatically installed. Click on the “OK” buttonwhen a message appears saying that the installation is complete. Thecamera is displayed as “Removable Disk” in either “My Computer” or“Explorer”.
● When using Windows 98/98SE: A display appears saying that the computer has recognized the cameraand has started installing the USB driver. Install the USB driver from thesoftware CD (provided) according to the instructions on P. 164.
● When using Mac OS 9.0 - 9.1:The computer recognizes the camera automatically and an “Untitled”icon appears on the Desktop.
6 Following “Transferring images to acomputer — Downloading” (P. 166),copy or move an image file on thepersonal computer.
164
Chapte
r 10
Connecting directly to a computer bycable (Cont.)
Installing a USB driver when using Windows 98/98SE
1 Connect the camera to the computerand set the mode dial to (see“How to connect”).● A window appears saying that the
computer has recognized the cameraas a “New Device (hardware)”.
2 Click on the “Next” button.
3 Confirm that “Search for the bestdriver for your device(Recommended)” is selected, thenclick on the “Next” button.
4 Place the software CD in the CD-ROM drive and wait until the CD isrecognized.● If a window automatically appears when the CD is ready, click on the
“Exit” button and erase the window.
5 Remove the check marks next to“Floppy disk drive” and “CD-ROMdrive”, add one next to “Specify alocation”, and click on the “Browse”button.
165
Connecting directly to a computer bycable (Cont.)
Chapte
r 106 In the “Browse for folder” window, click on the [+] mark at the left-
hand side of the “CD-ROM drive” icon, then click on the [+] mark atthe left-hand side of “USB folder”. The “Win98” folder appears at thebottom of the USB folder. Click on the “OK” button after selectingthe "Win98" folder.
7 The window at right appears. Clickon the “Next” button. A secondwindow appears. Again, click on the“Next” button.● A window appears showing the
progress of the file copying process(reading the USB driver into thecomputer).
8 When a message appears sayingthat USB driver installation iscomplete, go on to “Transferringimages to a computer —Downloading” (P.166).
Make sure “USB driver” is here.
166
Chapte
r 10
Transferring images to a computer — Downloading
If the camera is connected correctly to a personal computer, the card isrecognized as a drive (usually “Removable Disk”) on a personal computer.When using a Macintosh, the card is displayed as a new drive (Untitled) onthe desktop.Images stored on the card can be treated the same way as files on a floppy-disk or MO (magneto-optical disk) using software such as Windows Explorer.
● If you want to use CAMEDIA Master software, version 2.5 or higher isrequired.
● When using CAMEDIA Master software, click on “Removable Disk”, not “MyCamera”. Under Mac OS, the file name is “Untitled”.
Windows
1 Referring to “How to connect” (P. 162), connect the camera to yourcomputer. ● The card loaded in the camera is recognized as a folder on the personal
computer.
2 From the desktop, click the “My Computer” icon.
3 Double-click the “Removable Disk”icon.● A window containing a folder named
DCIM opens. If the “Removable Disk”icon does not appear, the camera isnot connected correctly. Go back to“How to connect” (P. 162) andconnect it again.
Note on using CAMEDIA Master software
167
Transferring images to a computer — Downloading (Cont.)
Chapte
r 104 Double-click the DCIM folder.
● A window containing a folder named100OLYMP opens.
5 Double-click the 100OLYMP folder. ● A new window opens, displaying your
image files.
6 Copy (download) the image files to your computer using Explorer.● When moving or copying a file, be sure to follow any instructions
provided by your computer.● To play back movies, the personal computer should have QuickTime
installed on it.● Install QuickTime from the provided software CD.
1 Connect the camera to your computer (see “How to connect” on P.162). ● An “Untitled” icon appears on the desktop. If this icon does not appear,
the camera is not connected correctly. Go back to “How to connect” (P.162) and connect again.
2 Double-click the “Untitled” icon.● A window containing a folder named
DCIM opens.
3 Double-click the DCIM folder.● A window containing a folder named
100OLYMP opens.
4 Double-click the 100OLYMP folder.● A new window opens, displaying your
image files.
168
Transferring images to a computer — Downloading (Cont.)
Chapte
r 10 Macintosh
Transferring images to a computer — Downloading (Cont.)
169
Transferring images to a computer — Downloading (Cont.)
Chapte
r 10
● Always disconnect the camera from the personal computer when doing anyof the following:– Changing the card.– Switching the mode dial position.– Turning off the camera.
5 Copy (download) the image files to your computer using Mac OS.● When moving or copying a file, be sure to follow any instructions
provided by your computer.
You can view images using: graphics applications that support JPEG(Paint Shop Pro, Photoshop, etc.); Internet browsers (NetscapeCommunicator, Microsoft Internet Explorer, etc.); CAMEDIA Mastersoftware; or other software. For details on using commercialgraphics applications, refer to their instruction manuals. When usinggraphics applications, make sure that the images are completelytransferred to the computer. The images (files) may be damaged ifthey are processed (e.g. rotated, etc.) by some graphics applicationswhile still in the card.
TIPS
170
Transferring images to a computer — Downloading (Cont.)
Chapte
r 10
To avoid computer malfunctions, always do the following when removing thecard. If a malfunction occurs, disconnect the USB cable and re-connect it,and/or re-start your personal computer.
Removing the card
Windows
1 Make sure the camera’s accesslamp is off.
2 Select the Drive icon (RemovableDisk) on “My Computer” and right-click to display the menu.
3 Select “Eject” and left-click.
4 Open the card cover on the cameraand remove the card.T See “Ejecting the card” (P. 29).
Card access lamp
171
Transferring images to a computer — Downloading (Cont.)
Chapte
r 10
1 Make sure the camera’s accesslamp is off.
2 Drag and drop the “Untitled” Driveicon onto the Trash on the desktopor select “Special” — “Eject” on themenu.
3 Open the card cover on the cameraand remove the card.T See “Ejecting the card” (P. 29).
Macintosh
Card access lamp
172
Transferring images to a computer — Downloading (Cont.)
Chapte
r 10
To remove the USB cable, do the following:Remember: First remove the card, following the steps on P. 170. Removingthe USB cable is possible even when the card is in the camera, but makesure that the card access lamp is not blinking.
Windows 98/SE, Mac OS
Make sure the camera’s access lamp is off, then remove the USB cable.
Windows 2000/Me
Do either of the following to remove the USB cable:
Removing the USB cable
(A) Click on the task bar.
1 Left-click on the “Unplug or Eject Hardware” icon (circled in the illustrationbelow) on the task bar (at the lower right-hand side of your computerscreen).
2 When a message appears saying that the driver has been stopped, left-click on the message.
3 When a message appears saying that the hardware can be ejected safely,click on the “OK” button.
4 Remove the USB cable.
(B) Double-click on the task bar.
1 Double-click on the “Unplug or Eject Hardware” icon (circled in theillustration below) on the task bar (displayed at the bottom right on apersonal computer).
2 When the display for ejecting the hardware appears, select the camerafrom the hardware device list, then click on the “Stop” button.
3 When a message appears saying that the hardware can be ejected safely,click on the “OK” button.
4 Remove the USB cable.
173
Saving directly from a card
Chapte
r 10Card adapters enable you to save images on your personal computer without
having to connect your camera directly to your computer.For the latest information on available adapters, consult our CustomerSupport Center.
Computer operating environment
Personal computerequipped with a 3.5"floppy disk-drive
Personal computerequipped with a PC cardslot (PCMCIA) or anexternal PC cardreader/writer
Personal computerequipped with a USB port
Required devices
Floppy disk adapter
PC card adapter
SmartMedia reader/writer
Note:● Check for compatibility. Depending on the computer operating
environment and/or the card memory capacity, the above devices maynot function properly.
● For details on operating the above devices, read the instructionsprovided with the device.
Using optionalaccessories
Chapter 11
175
AC adapter
Chapte
r 11An optional Olympus CAMEDIA-brand AC adapter allows you to power your
digital camera from a common AC wall outlet. Be sure to use the specified ACadapter.Use an AC adapter designed to operate on the AC voltage in the area thecamera is being used.Consult your nearest Olympus dealer or Service center for details.
1 Turn off the camera.
2 Plug the AC adapter into a power outlet.
3 Open the jack cover and plug the connection cord into the DC-Injack.
4 To disconnect, turn off the camera, and unplug the AC adapter firstfrom the camera then from the outlet.
Power plug
AC adapter
AC wall outlet
DC-IN jack (Black)
2
3
Connection cord plug
● If you shoot for a long time, noise may appear on pictures.● Read carefully the “GENERAL PRECAUTIONS” included in the package
and the AC adapter’s instructions.● Never connect or disconnect the AC adapter when the card access lamp is
blinking.
176
External flashChapte
r 11 Using the FL-40 external flash
Various types of flash shooting are possible with the FL-40 external flash,which can be used either by itself or together with the main flash.If the FL-40 is used, flash mode and exposure compensation will be detectedautomatically by the camera, allowing the main flash and external flash tofunction together.Using the two flashes together allows for more sophisticated lighting, such ascatch lighting.To connect the FL-40 to the camera, the exclusive FL-BK01 flash bracket(optional) and FL-CB01 bracket cable (optional) are required.
1 Mount the FL-40 external flash on theflash bracket, then fasten it to thecamera’s tripod socket and connectthe flash bracket and the camera’s 5-pin external flash socket using thebracket cable.● Refer to each separate instruction
manual for the external flash, flashbracket, and flash cable.
● The 5-pin external flash socket cover onthe camera is threaded. Unscrew andremove it before connecting the bracketcable.
2 In the top menu, select MODE MENUT CAMERA T FLASH.● The flash selection screen appears.
CAME
RAPI
CSE
TCA
RD
ISODRIVE
A/S/M
FLASHIN+
Flash selection screen
5-pin external flash socket
177
External flash (Cont.)
Chapte
r 113 To use the external flash only
T Select , then press .To use the external flash together with the main flashT Select IN+ , then press .
4 Turn on the external flash.● The mode for the external flash is TTL-AUTO.● When the shutter button is pressed halfway, the external flash begins
communicating with the camera and automatically switches to TTL-AUTO.
5 Press the (flash mode) button toselect the camera’s flash mode (P. 84).
Flash mode button
● If close-up pictures are overexposed, try using the main flash by itself. ● When the main flash and the FL-40 are used together, the main flash is
used as the compensating light source. This means that if the amount oflight from the FL-40 is insufficient (beyond its working range), the resultingpictures may be underexposed.
178
Chapte
r 11
External flash (Cont.)
Using commercially available external flashes
1 Mount an external flash on the flashbracket, then fasten it to the camera'stripod socket and connect the flashbracket and the camera's 5-pinexternal flash socket using the bracketcable.
2 In the top menu, select MODE MENUT CAMERA T A/S/M T M. Press .Adjust the shutter speed and theaperture.● Remember that a slow shutter speed
can produce blurred images. For thebest results, we recommend that youset the shutter speed from 1/200 to1/300 seconds.
3 Turn on the external flash.
4 Set the mode that automatically controls the amount of light emittedby the external flash. Also set ISO and aperture on the external flashto match the camera’s settings.● See the user’s manual for the external flash to select its modes.
External flashes (commercially available) can also be used with the exclusiveFL-BK01 (optional) and FL-CB01 bracket cable (optional) when the camera’smode dial is set to A/S/M.For details on compatible commercially available external flashes, refer to thenext page.
5-pin external flash socket
● The camera's flash mode will have no effect on the external flash. Theexternal flash will fire even when the camera's flash mode is set to (off).
● Confirm in advance that the external flash you are using is synchronizedwith the camera.
179
External flash (Cont.)
Chapte
r 11Compatible commercially available external flashes
When selecting an external flash, use products which meet thefollowing basic conditions.(1) Some flashes available on the market operate with a high voltage synchro
terminal. If one of these is used, it may not function normally. Contact themanufacturer of the flash you are using concerning the specifications ofthe flash's synchro terminal.
(2) Some flashes available on the market have the polarity of the synchroterminal reversed. In this case, even if the flash is connected, it will notfire. Contact the manufacturer of the flash for more information.
(3) Exposures when using an external flash require that adjustments bemade on the external flash unit.If an external flash is used in the Auto mode, match it with the F value andISO sensitivity settings on the camera.
(4) Even if the auto F value and ISO sensitivity of the external flash are set tothe same conditions as those on the camera, depending on thephotographic conditions, it is possible that the correct exposure may notbe obtained anyway. In such a case, adjust the auto F value or ISO valueon external flash unit or calculate the distance in the manual mode anduse it that way. However, generally, the auto F value and ISO value canonly be adjusted 1 step and beyond that, exposure compensation cannotbe made. (Exposure compensation in the camera is made invalid inexternal flash photography.)
(5) Use a flash which is capable of covering an illumination angle for a 35 mmor larger lens when calculated for 35 mm film. However, in close-upphotography with the lens on the wide setting, the bottom of the imagemay not expose correctly. The ideal is to have a wide angle adapter to fiton the flash and spread the illumination angle so it is wider.
(6) Use a flash unit with a flash time of 1/200 sec. or less when using theflash at full strength. For devices with a long flash time, such as a ringflash, a portion of the light emitted will not contribute to the exposure.
(7) If a flash unit or other accessory with additional communicationsfunctions other than the FL-40 is used, it may not only fail tofunction normally, but may also cause damage to the camera’scircuitry. Do not use such a device.
1 Mount the camera on a tripod or place it on a stable, flat surface.
2 In the top menu, select MODE MENUT CAMERA T DRIVE T . Press
. Movie record mode: In the top menu,select MODE MENU T CAMERA T
T ON.● appears on the control panel.
3 Point the remote control at the remotecontrol receiver on the camera. Forzooming, press the W or T button on theremote control.● During operation, the camera’s self-
timer/remote control lamp blinks.
180
Chapte
r 11
Remote control shooting
Shooting is possible using the remote control. This is useful when you want totake a picture with yourself in it.
CAME
RAPI
CSE
TCA
RD
ISODRIVE
A/S/M
FLASH BKT
DRIVE setting screen
Control panel
Self-timer/remote control
3m3m
5m
15° 15°
Shutter button
Transmittedfrequencyeffectivedistance
Remote controlreceiverSelf-timer/remote control lamp
181
Remote control shooting (Cont.)
Chapte
r 114 Press the shutter button on the remote control.
● The camera’s self-timer/remote control lamp blinks for about 3 secondsbefore taking the picture.
● If the remote control receiver is exposed to strong light, the effectivefrequency area may be reduced or shooting may not be take place.
● In the P and A/S/M modes, only single-frame shooting is possible with theremote control. Sequential shooting is not available.
● Read the remote control’s instructions for information on playback with theremote control.
● If the camera’s self-timer/remote control lamp does not blink afterpressing the shutter button on the remote control.TThe remote control may be too far from the camera. Move closer to
the camera and press the shutter button again on the remote control.TThere is frequency interference. Change the frequency according to
the remote control’s instructions.● How to cancel the remote control mode.TThe remote control mode is not canceled automatically after shooting.
Perform step 2 on page 180: In the still picture shooting mode setDRIVE to any other setting except , and in the movie recordingmode set to OFF.
TIPS
MiscellaneousThis chapter includes helpful
information about troubleshootingcamera operations, error codes, etc.
Chapter 12
183
Troubleshooting
Chapte
r 12
1 The power is off.
2 The batteries areloaded incorrectly.
3 The batteries areexhausted.
4 The batteries aretemporarily unable tofunction.
5 It is connected to apersonal computer.
6 The camera is in thesleep mode.
1 Set the mode dial to anyposition except OFF to turnon the camera.
2 Reload the batteriescorrectly.
3 Replace the batteries withnew ones.
4 The batteries may be toocold. Keep them warm whileusing the camera.
5 The camera will not operatewhile it is connected to apersonal computer.
6 Operate the camera (pressthe shutter button, turn themode dial, etc.)
P. 30
P. 25
P. 25
P. 27
P. 162
P. 30
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
The camera does not work.
No picture is taken when the shutter button is pressed.
1 The mode dial is set to.
2 Focus and exposureare not locked.
3 The memory gauge isfull.
4 The flash has notfinished charging.
1 Set the mode dial to anyposition except .
2 Release your finger from theshutter button and tryfocusing again. When thegreen lamp stops blinking,focusing is successful.
3 Wait until there is room inthe memory gauge.
4 Release your finger from theshutter button. When theorange lamp stops blinking,shoot again.
P. 59
P. 67
P. 76
P. 84
184
Troubleshooting (Cont.)Chapte
r 12
5 The card access lampblinks after shooting inthe mode.
6 There is a problem withthe card.
7 The card is full.
8 The batteries ran out ofpower.
9 The control panel/monitor indicationsdisappear, or only thebattery check blinks.
0 A write-protectadhesive seal is placedon the card or there isno card in the camera.
5 The recorded movie imagedata is being written to thecard. You can start shootingagain when the card accesslamp stops blinking.
6 See the error code chart.
7 Replace the card or deleteunwanted pictures, etc.
8 Replace the batteries withnew ones.
9 Replace the batteries withnew ones. (Do not open thebattery compartment coverwhen the card access lampis blinking.)
0 Insert a new card in thecamera.
P. 78
P. 190
P. 29, 130,131P. 25
P. 25
P. 29
POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
No picture is taken when the shutter button is pressed.
The date recorded with the image data is wrong.
1 The date is not set.
2 The camera has beenleft for approx. 1 hourwith the batteriesremoved and the datesetting is canceled.
1 Set the date. The clockadjustment is not factory-preset.
2 Set the date again.
P. 32
P. 32
185
Troubleshooting (Cont.)
Chapte
r 12POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
The flash does not fire.
1 The flash is set to theoff mode.
2 The subject is lighted.3 Sequential shooting is
on.4 You are recording
movies.5 Panorama shooting is
performed.6 FUNCTION is set to
BLACK/WHITE BOARD.
1 Press the button to selecta flash mode other than .
2 Set the flash to Fill-In mode.3 Set DRIVE to in the
menus.4 Set the mode dial to any
position other than .5 Set PANORAMA to OFF in
the menus.6 Set FUNCTION to OFF in
the menus.
P. 81–83
P. 81P. 88
P. 59
P. 98
P. 97
Pictures you have already taken do not appear on the monitor.
1 The camera is in theshooting mode.
2 There is no picture inthe card.
3 There is a problem withthe card.
4 The camera isconnected to a TV.
1 Set the mode dial to .
2 NO PICTURE appears on themonitor. Record pictures.
3 See the error code chart.
4 The monitor does notfunction when the camera isconnected to a TV.
P. 116
P. 37, 38,191P. 190
P. 133
1 The diopter is notadjusted properly.
1 Adjust the diopter again. P. 35
1 The brightness is notadjusted properly.
2 The monitor is exposedto direct sunlight.
1 Adjust the brightness.
2 Block the sunlight.
P. 76
The monitor is not clear.
The viewfinder display is not clear.
186
Troubleshooting (Cont.)Chapte
r 12 POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
Picture rotate, Picture protect, Single-frame erase, All-frame erase,Print reserve and Card formatting cannot be performed.
1 A write-protectadhesive seal is affixedto the card.
1 Use the card after peelingoff the seal. Do not reusethe write protect seal.
P. 28
When the camera is connected to a computer, an error messageappears while data is being transferred to the computer.
1 The cable is notplugged in correctly.
2 The power is off.3 The batteries are
exhausted.
4 The USB driver is notinstalled properly.
1 Connect the cable correctly.
2 Set the mode dial to .3 Replace the batteries with
new ones or use theoptional AC adapter.
4 Try installing the USB driveragain. Confirm that thecomputer recognizes thecamera.
P. 162
P. 163P. 25, 175
P. 162–165
1 The flash is in the auto-flash mode.
1 This “red-eye phenomenon”occurs with all cameras when aflash is used. It is caused bylight from the flash reflecting offthe retina at the back of theeye. Red-eye varies dependingon the individual and theshooting conditions such asambient lighting. Use of theRed-Eye Reducing Pre-Flashmode significantly reduces thisphenomenon.
P. 81
The subject’s eyes appear red in pictures recorded with the flash.
187
Troubleshooting (Cont.)
Chapte
r 12POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
The picture is out of focus.
1 The camera movedwhen the shutterbutton was pressed.
2 The AF target markwas not on the subject.
3 The lens is dirty.
4 The subject was tooclose.
5 The shutter button waspressed while standingin front of the camerain the self-timer mode.
6 The manual focus wasused with the wrongfocal range.
1 Hold the camera correctly,and press the shutter button.
2 Position the AF target markon the subject, or use thefocus lock.
3 Clean the lens with a softdry cloth.
4 Set the camera to the macromode. The shooting distancevaries according to the zoomsetting.
5 Press the shutter button whilelooking into the viewfinder,not while standing in front ofthe camera.
6 Use the right manual focusfor the distance.
P. 35, 64
P. 67
P. 189
P. 96
P. 142
P. 70
1 The flash mode wasset to the Fill-in flashmode.
2 The subject wasexcessively illuminated.
1 Select a flash mode otherthan the Fill-in flash mode.
2 Adjust the exposurecompensation or change thecamera position toward thesubject.
P. 81–83
P. 94, 108
The picture is too bright.
188
Troubleshooting (Cont.)Chapte
r 12 POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE
The picture is too dark.
1 The flash was blockedby a finger.
2 The subject was out ofthe working range ofthe flash.
3 The flash mode wasset to the Off mode.
4 The subject was toosmall and was backlit.
5 The sequential modewas used.
1 Hold the camera correctly,keeping your fingers awayfrom the flash.
2 Shoot within the flashworking range. Or, use anexternal flash.
3 Press the button to selecta flash mode other than Off.
4 Set the flash to Fill-In mode. Or,use the spot metering mode.
5 Higher shutter speeds areused when the sequentialmode is selected which mayresult in pictures that aredarker than usual.
P. 35
P. 84, 176
P. 81–83
P. 81, 91
P. 88
The colors of pictures taken indoors look unnatural.
1 The lighting fixture(s)affected the picture.
2 The subject is mostlydark.
3 The white balancesetting is wrong.
1 Set the flash mode to Fill-In.
2 Include white in the image oradjust the white balance.
3 Adjust the white balance.
P. 81
P. 109–111
P. 109–111
The picture has obscured edge(s).
1 The lens was partlyblocked by a finger orthe strap.
1 Hold the camera correctly,keeping your fingers and thestrap away from the lens.
P. 35
189
User maintenance
Chapte
r 12After use
Be sure to turn off the power and attach the lens cap to the lens.
Cleaning the camera
1 Turn off the camera. (P. 30)
2 Remove the batteries (P. 25). When using the AC adapter, unplug theAC adapter from the camera and the AC outlet.
3 ExteriorWipe gently with a soft cloth. To wipe off heavy dirt, soak the cloth indiluted mild soap and wring it well. Wipe off the camera with the dampcloth and then dry it with a dry cloth. If you have used your camera at thebeach, use a cloth dampened with fresh water.Monitor and viewfinderWipe gently with a soft cloth.LensBlow dust off the lens with a blower brush (commercially available), thenwipe gently with lens cleaning paper. When storing the camera for a longperiod, attach the lens cap to the lens.CardWipe gently with a soft cloth.
● Do not use a strong solvent such as benzine or alcohol, or chemicallytreated cloth.
● Cleaning should be done only after the battery pack has been removed orother power supply units have been disconnected.
● Mold may form on the lens surface if the lens is left dirty.
190
Error codesChapte
r 12 If there is a problem with your camera, a blinking error code will appear.
Possiblecauses
The card isnot inserted,or it cannot berecognized.
No morepictures canbe taken.
Writing to thecard isprohibited.
Cannotrecord, playback or erasepictures in thiscard.
The recordedimage cannotbe playedback with thiscamera.
Corrective action
Insert the cardcorrectly.Insert a differentcard.
Replace the cardor eraseunneededpictures.
If you are takingpictures, removethe write-protectadhesive seal.
If the card is dirty,wipe it with a cleantissue and insert itagain. If theproblem is still notcorrected, this cardcannot be used.
Load the imageusing personalcomputer imageprocessingsoftware. If thatcannot be done,the image file ispartially damaged.
MonitorControl panel
Empty screen
191
Error codes (Cont.)
Chapte
r 12Possible
causesThe card isnot formatted.
There are nopictures in thecard, so thereis nothing toplay back.
There is noempty spacein the card, soit cannotrecord newinformationsuch as printdata andsound.
The cardcover is open.
Corrective action
Format the card.
Insert a cardwhich containsimages.
Replace the cardor eraseunneededpictures.
Close the cardcover.
MonitorControl panel
CARD-COVER OPEN
192
Chapte
r 12
Specifications
Product type Digital camera (for shooting and displaying)
Recording SystemStill Digital recording, JPEG (in accordance with
Design rule for Camera File system (DCF)), TIFF(non-compression), Digital Print Order Format(DPOF)
Sound with still images Wave formatMovie QuickTime Motion JPEG support
Memory 3V (3.3V) SmartMedia, 4 MB - 128 MB (all cardsexcept 2 MB)
No. of storable pictures Record without sound(When a 16 MB 1 frame (TIFF: 2272x1704)card is used) Approx. 5 frames (SHQ: 2272x1704)
Approx. 16 frames (HQ: 2272x1704)Approx. 49 frames (SQ1: 1280x960 NORMAL)Approx. 165 frames (SQ2: 640x480 NORMAL)
Image pickup element 1/1.8" CCD solid-state image pickup,4,130,000 pixels (gross)
Recording image 2272 x 1704 pixels (TIFF/SHQ/HQ)2048 x 1536 pixels (TIFF/SQ1)1600 x 1200 pixels (TIFF/SQ1)1280 x 960 pixels (TIFF/SQ1)1024 x 768 pixels (TIFF/SQ2)640 x 480 pixels (TIFF/SQ2)3200 x 2400 pixels (SHQ/HQ)2816 x 2112 pixels (SHQ/HQ)
Lens Olympus lens 7.1 mm to 21.3 mm, F1.8 to F2.6, 10 elements in 7 groups (equivalent to 35 mm to105 mm lens on 35 mm camera), asphericalglass
Photometric system Digital ESP metering, Spot metering systemAperture W : F1.8 to F10.0
T : F2.6 to F10.0
Shutter speed Used with mechanical shutter Still 4 to 1/800 sec. (M mode: 16 to 1/800 sec.; P/A
mode when NOISE REDUCTION is set to OFF:1 to 1/800 sec.)
Movie 1/30 to 1/10000 sec.
193
Specifications (Cont.)
Chapte
r 12Viewfinder Optical real image viewfinder
Monitor 1.8" TFT color LCD display,approx. 114,000pixels
Battery charging time Approx. 6 sec. (at normal temperature with newfor flash batteries)
Autofocus TTL system autofocus, Spot AF, Contrastdetection system,Focusing range: 0.2 m to ∞ (0.3 ft to ∞)
Outer connector DC-IN jack, A/V OUT jack, USB connector (USB1.0 compatible), 5-pin external flash socket
Automatic calendar Up to 2031system
Operating environmentTemperature 0°C to 40°C (32°F to104°F) (operation)
–20°C to 60°C (– 4°F to 140°F) (storage)Humidity 30% to 90% (operation)
10% to 90% (storage)
Power supply For batteries, use 2 CR-V3 lithium battery packs,or 4 AA (R6) NiMH batteries, NiCd batteries,Alkaline batteries or lithium batteries.AC adapter (optional)Manganese (zinc-carbon) batteries cannot beused.
Dimensions 109.5 mm x 76.4 mm x 69.6 mm (W) X (H) X (D) (4.3" x 3.0" x 2.7")
Weight 320 g (0.7 lb) (without batteries/card)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OROBLIGATION ON THE PART OF THE MANUFACTURER.
194
Chapte
r 12
Glossary of terms
A (Aperture Priority) ModeYou set the aperture yourself andthe camera automatically variesthe shutter speed so that thepicture is taken with the bestexposure.
AE (Automatic Exposure)The camera's built-in exposuremeter automatically sets theexposure. The 3 AE modesavailable on this camera are Pmode, in which the camera selectsboth the aperture and shutterspeed, A mode, in which the userselects the aperture and thecamera sets the shutter speed,and S mode, in which the userselects the shutter speed and thecamera sets the aperture. In Mmode, the user selects both theaperture and the shutter speed.
ApertureThis adjusts the amount of lightthat passes through the lens.Lower values allow more light topass, while higher values lessenthe amount of light. When you setthe lowest aperture value for alens, the aperture is at its widest.Conversely, the highest aperturevalue gives the narrowestaperture.
BacklightA light source in the Monitor to let itbe seen more easily.
CCD (Charge-coupled Device)This converts light passing throughthe lens into electrical signals. Onthis camera, light is picked up at4,13 million points and convertedinto RGB signals to build a singleimage.
Contrast Detection MethodThis is used to measure thedistance to the subject. Thecamera determines if the image isfocused by the level of contrast inthe subject.
Conventional PhotographThis refers to recording imagesusing silver halide (the method forrecording images in conventional,non-digital photography.) Thissystem is in contrast to still videoand digital photography.
DCF (Design rule for CameraFile system)A standard for image files by theJapan Electronics and InformationTechnology Industries Association(JEITA).
Digital ESP (Electro-SelectivePattern) light meteringThis determines the exposure bymetering and calculating the lightlevels in the center and otherareas of the image separately.
195
Glossary of terms (Cont.)
Chapte
r 12DPOF (Digital Print Order
Format)This is for saving desired printsettings on digital cameras. Byentering which images to print andthe number of copies of each, theuser can automatically have thedesired images printed by a printeror print lab that supports the DPOFformat.
Eclipsing (Vignetting) This refers to when an objectobscures part of the field of viewso that the whole subject is notphotographed. Vignetting alsorefers to when the image seenthrough the viewfinder does notexactly match the image shotthrough the objective lens, so thephotographed image includesobjects not seen through theviewfinder. In addition, vignettingcan occur when an incorrect lenshood is used, causing shadowingto appear in the corners of theimage.
EV (Exposure Value)A system for measuring exposure.EV0 is when the aperture is at F1and the shutter speed is 1 second.The EV then increases by 1 eachtime the aperture increases by oneF stop or the shutter speedincreases by one increment. EVcan also be used to indicatebrightness and ISO settings.
ExposureThe amount of l ight used tocapture an image. The exposure isdetermined by the time the shutteris open (shutter speed) and theamount of l ight that passesthrough the lens (aperture).
Flash BracketA mount used to attach an externalflash to the camera.
ISOA method for indicating film speedby the International Organizationfor Standardization (ISO) (e.g."ISO100"). Higher ISO valuesindicate greater sensitivity to light,so images can be exposed even inlow-light conditions.
JPEG (Joint PhotographicExperts Group)A compression format for color stillimages. Photographs (images)shot using this camera arerecorded onto the SmartMediacard in JPEG format when theRecord mode is set to SHQ, HQ orSQ. By downloading these imagesto a personal computer, users canedit them using graphicsapplication software or view theimages using an Internet webbrowser.
196
Chapte
r 12
Glossary of terms (Cont.)
M (Manual) ModeThe user sets both the apertureand shutter speed.
P (Program) ModeAlso called Program AE mode. Thecamera automatically sets the bestshutter speed and aperture for theshot.
PAL (Phase Alternating Line)In Europe, PAL television signalsare normally used. North Americaand Japan use NTSC signals.
PixelsA pixel is the smallest unit (dot)used to make up an image. Clearlarge-sized printed images requirea large number of pixels.
Ring FlashA flash unit that uses a circularxenon fluorescent tube as its lightsource.
S (Shutter Priority) ModeAlso called Shutter Priority AEmode. The user selects the shutterspeed and the cameraautomatically varies the apertureso that the picture is taken with thebest exposure.
Synchro TerminalsTerminals on an external flash unitfor connecting it to the camera.
TFT (Thin-Film Transistor) ColorMonitorA color Monitor constructed usingthin-film technology.
TIFF (Tagged Image File Format)An uncompressed format used forsaving highly-detailed black &white or color image data. TIFFimage files can be handled bysoftware programs for scannersand graphics applications.
TTL (Through-The-Lens) SystemTo help adjust exposure, a lightreceptor built into the cameradirectly measures the light passingthrough the lens.
TTL-AUTOFor use with an external flash.Light emitted by the flash ismeasured by the light receptor inthe camera as it passes throughthe lens. A signal is then sent toadjust the external flash's intensity.
197
Chapte
r 12
Index
AAC adapter ..................................175AC outlet ....................................175Adjusting the monitor brightness ......................76
AE lock ..........................................94AE memory ............................93, 95AF sequential shooting..................88All-frame print reserve ................153Aperture ..................................59, 61Assigning a function to the button ......................................137
Assigning the mode to A/S/M ......................61–63
Auto flash ......................................81Auto focus ....................................65Auto bracket ..................................89A/V output ..................................133
BBattery ....................................25–27Beep............................................146Built-in memory ......................76, 78
CCAMEDIA Master ..................98, 166Cleaning the camera ..................189Close-up display..........................125Color temperature........................111Composing a picture ..............72, 75Connections to a TV....................133Connections to a computer..162, 163Custom setting ............................143
DDate/time settings ........................32DCF ................................................2Digital ESP metering ....................91Diopter adjustment ........................35Displaying movies................116–118Displaying multiple pictures at one time ................................126
DPOF ..........................................151
Drive mode....................................88
EENLARGE SIZE..........................106Erasing pictures ..................130, 131Exposure compensation..............108Exposure differential ....................63External flash ..............................176
FFill-in flash (forced activation) ......811st-CURTAIN ................................821st CURTAIN with red-eye reduction flash ..........................83
Flash ......................................81–86Flash bracket ..............................176Flash intensity control ..................86Flash override ..............................82FlashPath....................................173Focusing..................................65–71Focus lock ....................................67Formatting ..................................132Full-time AF ..................................69
IIndex display ..............................126Inserting/ejecting the card ............29ISO..............................................107
JJPEG (compression) ..................105
MMacro mode ..................................96Manual focus ................................70Manual mode ..........................60, 63Menu, MODE MENU ........45, 49–53Menu, CAMERA......................49, 50
CAMERA, DRIVE ................49, 88CAMERA, ..........50, 142, 180CAMERA, ISO....................49, 107CAMERA, A/S/M ............49, 61–63CAMERA, ......................49, 86
198
Chapte
r 12
Index (Cont.)
CAMERA, FLASH ..............49, 177CAMERA, SLOW..............49, 83CAMERA, NOISE REDUCTION ......49, 114
CAMERA, MULTI METERING ............49, 92
CAMERA, DIGITAL ZOOM..................50, 79
CAMERA, FULLTIME AF......50, 69CAMERA, AF MODE............50, 68CAMERA,
(for still pictures) ..........50, 100CAMERA, (for movies)....50, 101CAMERA, PANORAMA ......50, 98CAMERA, FUNCTION ........50, 97
Menu, PICTURE ..........................51PICTURE,
(record mode)............51, 103PICTURE, WB (white balance)............51, 109
PICTURE, ..................51, 111PICTURE, SHARPNESS....51, 112PICTURE, CONTRAST......51, 113
Menu, CARD ................................51CARD, CARD SETUP........51, 132
Menu, SETUP ........................52, 53SETUP, ALL RESET ....52, 53, 143SETUP, (beep) ......52, 53, 146SETUP, REC VIEW............52, 146SETUP, FILE NAME ..........52, 147SETUP, PIXEL MAPPING ..52, 148SETUP, (monitor brightness) ....52, 53, 76
SETUP, (date/time setting) ........32, 52, 53
SETUP, m/ft ......................52, 149SETUP, SHORT CUT ......................52, 139SETUP, CUSTOM BUTTON ............52, 136SETUP, (number of pictures displayed in the index display) ............................53, 127
Menu, (Slide-show) ...... 55, 117Menu, INFO ..........................55, 124Menu, PLAY ................................53
PLAY, (sound record) ....53, 128Menu, MOVIE PLAY..............55, 118Metering mode ........................91–95Mode dial, P ..................................59Mode dial, A/S/M ....................59, 60Mode dial, (Movie record) ......60Mode dial, (Playback) ..........116Monitor on/off ................................75Multi-metering ..............................92
OOptional accessories ..................174
PPower on/off ..................................30Pressing the Shutter buttonhalfway/all the way ......................64Print reserve................................151Printer..........................................151Protection ....................................129
QQuick view ..................................116
RRecord mode ..............................103Recording movies ..................77, 78Red-eye reduction flash ................81Remaining battery power ........19, 26Resetting print reserve ................159Rotating and displaying pictures 134
199
Index (Cont.)
Chapte
r 12S
2nd-CURTAIN ..............................83Self-timer ....................................142Sequential shooting ................88–90Shutter speed..........................62, 63Single frame playback ................116Sleep mode ..................................30Slide-show ..................................117Slow synchronization ..............82, 83SmartMedia ..................................28SmartMedia Reader/Writer ........173Specifications ......................192, 193Spot AF ........................................68Spot metering................................91
TTaking a still picture ................72–76Telephoto shooting ........................79TIFF (non-compression)..............103Top menu ....................................44Transferring pictures to a computer ..........................166–169
WWhite balance, Auto ....................109White balance, PRESET ............109White balance, (overcast) ....109
White balance, (daylight) ......109
White balance, (tungsten light) ..........................109
White balance, (fluorescent) 109
White balance, (One touch white balance) ..................109, 110
Wide-angle shooting ....................79
ZZoom ......................................79, 80
(Hotline Numbers for customers in Europe) Tel. 01805-67 10 83 for GermanyTel. 00800-67 10 83 00 for Austria, Belgium, Denmark, France,
Netherlands, Norway, Sweden, Switzerland, United Kingdom
Tel. +49 180 5-67 10 83 for Finland, Italy, Luxembourg, Portugal, Spain, Czech Republic
Tel. +49 40-237 73 899 for Greece, Croatia, Hungary and the Rest ofEurope
Our Hotline is available from 9 am to 6 pm (Monday to Friday)(E-Mail) [email protected]
http://www.olympus.com
© 2001 OLYMPUS OPTICAL CO., LTD.
OLYMPUS OPTICAL CO., LTD.San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan.
(Customer support) Tel. 0426-42-7499 Tokyo
OLYMPUS AMERICA INC.Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000(Technical support) Tel. 1-888-553-4448 (Toll-free) (First 30 days after purchase)
(Technical support) Tel. 1-631-844-5520 (After 30 days)[email protected]
OLYMPUS OPTICAL CO. (EUROPA) GMBH.(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany.
Tel. 040-237730 (Letters) Postfach 10 49 08, 20034 Hamburg, Germany.
VT304002