Building a Cob Oven-In Pictures

download Building a Cob Oven-In Pictures

of 45

Transcript of Building a Cob Oven-In Pictures

  • 8/6/2019 Building a Cob Oven-In Pictures

    1/45

    Cob Oven Workshop with Tom Trout

  • 8/6/2019 Building a Cob Oven-In Pictures

    2/45

    Dan Givens from Alaska prepares a base for the oven. The oven is temporary and will bedismantled after the workshop.

  • 8/6/2019 Building a Cob Oven-In Pictures

    3/45

    Tom Trout has brought a load of local clay from an excavation site mixed with straw.

  • 8/6/2019 Building a Cob Oven-In Pictures

    4/45

    The hearth is recycled firebrick laid dry. Tom spots the door plug in place with cob.

  • 8/6/2019 Building a Cob Oven-In Pictures

    5/45

    The oval shape of the oven is sketched out on the hearth. The oven shape is based on thetraditional

    Quebec oven, and can be described as a "crouching groundhog". In Quebec it is describedas a

    beaver.

    Scaled drawings for a slightly larger shape can be found at the 2003 French OvenWorkshop

  • 8/6/2019 Building a Cob Oven-In Pictures

    6/45

    Damp sand is used to form a mold for the clay oven shape.

  • 8/6/2019 Building a Cob Oven-In Pictures

    7/45

    Sand is packed in place.

  • 8/6/2019 Building a Cob Oven-In Pictures

    8/45

    Firebricks are used to shape the edge of the sand. John Rousseau wets the sand.

  • 8/6/2019 Building a Cob Oven-In Pictures

    9/45

    John and Tom prepare cob. Water is added and the mix is worked intobread loaf shaped lumps that are laid on the form

  • 8/6/2019 Building a Cob Oven-In Pictures

    10/45

    Additional firebricks.

  • 8/6/2019 Building a Cob Oven-In Pictures

    11/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    12/45

    Preparing cob. Footpower is fun.

  • 8/6/2019 Building a Cob Oven-In Pictures

    13/45

    Preparing cob lumps ready for placing on the sand form.

  • 8/6/2019 Building a Cob Oven-In Pictures

    14/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    15/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    16/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    17/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    18/45

    The goal is to get approximately a 4 - 9" thickness. In a more permanent oven, the firstlayer would

    be adobe (clay and sand) instead of cob (clay and straw). This is described in thoroughdetail in

    Kiko Denzer excellent bookBuild Your Own Earth Oven.

  • 8/6/2019 Building a Cob Oven-In Pictures

    19/45

    As the layers are placed, finger holes are added to provide a key for the next layer.

  • 8/6/2019 Building a Cob Oven-In Pictures

    20/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    21/45

    The oven is built on Tuesday - total time, about 2 hours. There will be a pizza party onThursday,

    so we need an accelerated drying schedule.

    Patrice Dupont lights a fire immediately, in order to burn out the door plug and startdrying the clay.

    After the plug is gone, sand is gradually removed and the fire is pushed inside the oven

  • 8/6/2019 Building a Cob Oven-In Pictures

    22/45

    Patrice Dupont and Pat Manley check for warmth as Scott Goodman looks on.

  • 8/6/2019 Building a Cob Oven-In Pictures

    23/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    24/45

    Decorative touches are added as the oven dries.

  • 8/6/2019 Building a Cob Oven-In Pictures

    25/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    26/45

    The fire progresses inside the oven.

  • 8/6/2019 Building a Cob Oven-In Pictures

    27/45

    Sand is gone, and the front of the oven is dry.

  • 8/6/2019 Building a Cob Oven-In Pictures

    28/45

    Note the dry patch at the front (left) top.

  • 8/6/2019 Building a Cob Oven-In Pictures

    29/45

    Various air systems were tried to speed up the burn. Air is entering at the bottom, andsmoke

    is exiting at the top.

  • 8/6/2019 Building a Cob Oven-In Pictures

    30/45

    Fire is hot enough to ignite smoke that is leaving the oven.

  • 8/6/2019 Building a Cob Oven-In Pictures

    31/45

    A torch test on the clay. This particular local clay does not fire very hard. The surface isstill quite

    water absorbent, but abrades somewhat less.

  • 8/6/2019 Building a Cob Oven-In Pictures

    32/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    33/45

    Pizza time. William Davenport and Tom Trout display their skills.

  • 8/6/2019 Building a Cob Oven-In Pictures

    34/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    35/45

    Loading pizza.

    Note the different colour spots from the torch tests on the oven side.

  • 8/6/2019 Building a Cob Oven-In Pictures

    36/45

    Baking pizza. Floor temperature is around 600F and dome temperature 700F. Hearth iscooler near the door, where cold air rushes in. Pizza in a wood oven is baked by radiation

    from thedome and conduction from the hearth. Cool air is streaming over the pizza itself.

  • 8/6/2019 Building a Cob Oven-In Pictures

    37/45

    Post mortem.

    The area around the door is quite soft, and abrades easily.

  • 8/6/2019 Building a Cob Oven-In Pictures

    38/45

    Norbert Senf slices the oven with a diamond blade.

  • 8/6/2019 Building a Cob Oven-In Pictures

    39/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    40/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    41/45

    Note the redder fired layer on the inside, and the darker intermediate layer where there ischarred

    straw.

  • 8/6/2019 Building a Cob Oven-In Pictures

    42/45

    Overall thickness is around 3" - 4".

  • 8/6/2019 Building a Cob Oven-In Pictures

    43/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    44/45

  • 8/6/2019 Building a Cob Oven-In Pictures

    45/45