BUAA Ungraduate Programs Taught in English
-
Upload
guillermo-orozco -
Category
Documents
-
view
224 -
download
0
Transcript of BUAA Ungraduate Programs Taught in English
-
7/25/2019 BUAA Ungraduate Programs Taught in English
1/21
Bachelor Programs for International Students
taught in English
Beihang University, Beijing, China
April, 2013
-
7/25/2019 BUAA Ungraduate Programs Taught in English
2/21
Contents
1 Bachelor Program of Electronic Information Engineering
----------------------------------------------------------------------------------------------------------1
2 Bachelor Program of Flight Vehicle Design and Engineering
-----------------------------------------------------------------------------------------------------------4
3 Bachelor Program of Computer Science and Engineering
-----------------------------------------------------------------------------------------------------------7
4 Bachelor Program of Mechanical Engineering and Automation
--------------------------------------------------------------------------------------------------------- 10
5 Bachelor Program of International Economics and Trad
-------------------------------------------------- -------------------------------------------------------- 13
6
Bachelor Program of Civil Engineering
--------------------------------------------------------------------------------------------------------- 16
-
7/25/2019 BUAA Ungraduate Programs Taught in English
3/21
- 1 -
Bachelor Program of Electronic Information Engineering
Introduction to School of Electronics and Information Engineering:
School of Electronics and Information Engineering (SEIE) of Beihang University (originally Department
of Electronic Engineering) is one of the earliest department of aeronautic electronic engineering founded inChina, which has a history of 50 years.
SEIE composes of more than ten multidiscipline research laboratories and centers including a national
open laboratory for electronic system and measurement-control technology, an key avionics laboratory of
aviation ministry, a teaching center of experiment and practice, GPS research center, BUAA-Angilent
electronic R&D center, Ansoft-BUAA training center and Willim C.Y. Li communication R&D center, etc.
SEIE has 146 faculty and staff members, including 23 professors and 55 associate professors, in which
22 professors are doctoral supervisors. The school has already cultivated more than 10000 undergraduates,
graduates, doctors and post-doctoral fellows. The number of the students in campus is 960 for undergraduate
students and more than 1000 for Master and Ph.D. candidates.
In SEIE, Long term academic exchanges, joint laboratories and contracted projects have been established
and performed with reputed universities, research institutes and industries in China and abroad.
Education Curriculum
the 1stSemester
Code Title Hours Credits Note Type Evaluation
A09A101I
(1)
Advanced Mathematics for Engineering (1)90 6.0 Compulsory NSC Examination
B25D111I
Introduction to China16 1.0 Compulsory HC Examination
B25D116I (1)
Chinese (1)64 3.0 Compulsory HC Examination
C05D101I B
Introduction to Aeronautics and Astronautics B26 2.0 Compulsory ETC Examination
C06D101IUniversity Computer Foundation
44 2.0 Compulsory ETC Examination
C32D101I
Engineering Experience and Cognition20 0.5 Compulsory ETC Test
E02D111I
Introduction to Electronic Information Engineering18 1.0 Compulsory FMC Examination
the 2nd
Semester
Code Title Hours Credits Note Type Evaluation
A09A102I (2)
Advanced Mathematics (2)86 5.0 Compulsory NSC Examination
A09A103I
Advanced Algebra112 6.0 Compulsory NSC Examination
A19A101I (1)
University Physics for Engineering (1)64 4.0 Compulsory NSC Examination
B25D117I
(2)
Chinese (2)64 3.0 Compulsory HC Examination
C25D121I
C
C Programming Language 48 2.5 Compulsory ETC Examination
E07D101I
Introduction to Mechanical Engineering56 3.5 Compulsory FMC Examination
-
7/25/2019 BUAA Ungraduate Programs Taught in English
4/21
-
7/25/2019 BUAA Ungraduate Programs Taught in English
5/21
- 3 -
E02B353I
Digital Signal Processing60 3.5 Compulsory FMC Examination
E02D354I
The Foundation of Information Theory32 2.0 Compulsory FMC Examination
F02D3110
Image Processing50 3.0
Elective(in Chinese)
MC Test
F02D3240 Advanced Embedded System34 2.0 Elective(in Chinese) MC Test
the 7thSemester
Code Title Hours Credits Note Type Evaluation
E02D235IEDA
Foundation of Electronic Design Automation64 3.5 Compulsory FMC Examination
E02B371I
Principle of Communication66 4.0 Compulsory FMC Examination
F02D411I
Radio Navigation36 2.0 Compulsory MC Examination
F02D414I Antennas and Feed System for Communication
36 2.0 Compulsory MC Examination
F02D4380
Networks and Network Management16 1.0
Elective(in Chinese)
MC Examination
F02D4220
Telemetry and Telecommand System36 2.0
Elective(in Chinese)
MC Test
F02D4210
Software Radio Fundament48 2.5
Elective
(in Chinese)MC Test
F02D4280DSP
The Theory and Application of DSPs38 2.0
Elective
(in Chinese)MC Test
the 8thSemester
Code Title Hours Credits Note Type Evaluation
G02D4010Graduation Thesis
16wks 8.0 Compulsory PC Test
Explanation of course types:
NSC:Natural Science Courses () HC: Humanities Courses ()
ETC: Engineering Technology Courses () FMC: Fundamental Major Courses ()
MC: Major Courses () PC: Practice Courses ()
-
7/25/2019 BUAA Ungraduate Programs Taught in English
6/21
- 4 -
Bachelor Program of Aeronautical Science and Engineering
Introduction to School of Aeronautical Science and Engineering:
As aeronautics and astronautics is the symbols of a countrys advanced technology, School of Aeronautic
Science and EngineeringSASEis one of the best departments and with the feature of aeronautic andastronautic in Beihang University. With strong faculty, there are 58 professors(51 doctoral tutors), 48 vice
professors, 70% of the staff are teachers, 83% of young teachers are with doctoral degree, more than 50
teachers have the experience of research on doctoral degree and post-doctoral degree. The school has 4 units
as subordinate departments, which are: Aircraft Department, Research Institute of Fluid Mechanics, Research
Institute of Solid Mechanics, Department of Human-Aircraft and Environment Engineering, involving 4 first
class disciplines and 7 second class disciplines. Of all the first class disciplines, the Aeronautic and
Astronautic Science and Technology ranks the first in the whole nation, while Mechanics ranks the second
and Traffic Transportation ranks the third. The school has 8 doctor stations, 7 master stations and 3
post-doctor moving stations. Mechanics, Aeronautic and Astronautic Science and Technology, and Traffic
Transportation Engineering are first class doctor stations. Fluid Mechanics, Solid Mechanics, Aircraft Design,
Human-Aircraft and Environment Engineering, and Engineering Mechanics are national key disciplines. The
school also has Beijing Mechanics Educational Demonstrating Center, Aeronautic Innovation and Practice
Base, Airplanes Display Room, Solid Mechanics Educational Experimental Center, Flying Control and
Simulation Lab, Environmental Simulation and Imitation Lab. Furthermore, the national famous aeronautic
education and popular science base -- Beijing Aeronautic Museum, is also built in the school. Today, the
school has developed into a national top-ranking aeronautic school, which is also an important base for
cultivating aeronautic and astronautic talent people with high qualities, as well as a science research base for
solving important and key technologies in the aeronautic and astronautic field.
Education Curriculum
the 1st Semester
Code Title Hours Credits Note Type Evaluation
A09A101I
(1)
Advanced Mathematics for Engineering (1)90 6.0 Compulsory NSC Examination
B25D111I
Introduction to China16 1.0 Compulsory HC Examination
B25D116I (1)
Chinese (1)64 3.0 Compulsory HC Examination
C05D101I
B
Introduction to Aeronautics and Astronautics B 26 2.0 Compulsory ETC Examination
C06D101I
University Computer Foundation44 2.0 Compulsory ETC Examination
C32D101IEngineering Experience and Cognition
20 0.5 Compulsory ETC Test
E07B103I B
Engineering Graphics B64 4.0 Compulsory FMC Examination
the 2ndSemester
Code Title Hours Credits Note Type Evaluation
A09A102I
(2)
Advanced Mathematics (2) 86 5.0 Compulsory NSC Examination
A09A103IAdvanced Algebra
112 6.0 Compulsory NSC Examination
-
7/25/2019 BUAA Ungraduate Programs Taught in English
7/21
- 5 -
A19A101I (1)
University Physics for Engineering (1)64 4.0 Compulsory NSC Examination
B25D117I
(2)
Chinese (2)64 3.0 Compulsory HC Examination
C25D121IC
C Programming Language48 2.5 Compulsory ETC Examination
G32A201I AMechanical Technology Practice A140 3.5 Compulsory PC Test
the 3rdSemester
Code Title Hours Credits Note Type Evaluation
A09B204I A
Probability Statistics A64 4.0 Compulsory NSC Examination
A19A202I (2)
University Physics for Engineering (2)64 4.0 Compulsory NSC Examination
A19A103I B (1)
Fundamental Physics Experiments B (1)28 1.5 Compulsory NSC Examination
E02B231I Circuit Analysis64 4.0 Compulsory FMC Examination
E05B203I A(1)
Mechanics of Materials A(1)40 2.5 Compulsory FMC Examination
E05B201I A(1)
Theoretical Mechanics A(1)64 4.0 Compulsory FMC Examination
the 4thSemester
Code Title Hours Credits Note Type Evaluation
A19A104I B (2)
Fundamental Physics Experiments B (2)24 1.5 Compulsory NSC Examination
E030206I Electric Engineering and Electronics72 4.5 Compulsory FMC Examination
E05B204I A(2)
Mechanics of Materials A(2)58 3.5 Compulsory FMC Examination
E05B202I A(2)
Theoretical Mechanics A(2)26 1.5 Compulsory FMC Examination
E07B203I
Theory to Machines and Mechanism54 2.5 Compulsory FMC Examination
E05C241I (1)
Aerodynamics54 3.0 Compulsory FMC Examination
E07B211I
The Science of Engineering Materials34 2.0 Compulsory FMC Examination
G32A204I
Electronic Technology Practice80 2.0 Compulsory PC Test
F05D231I
Equations of Mathematical Physics32 2.0 Compulsory MC Examination
the 5thSemester
Code Title Hours Credits Note Type Evaluation
E05C322I B
Automatic Control Theory (B)48 3.0 Compulsory FMC Examination
E05C341I(2)
Aerodynamics42 2.5 Compulsory FMC Examination
E07B304I
Mechanical Design64 3.0 Compulsory FMC Examination
-
7/25/2019 BUAA Ungraduate Programs Taught in English
8/21
- 6 -
E05C352I
Heat Transfer56 3.5 Compulsory FMC Examination
F05D331I
Computational Method32 2.0 Compulsory MC Examination
E05D3310
Mechanics of Elasticity32 2.0
Elective(in Chinese)
FMC Examination
E05D666I Technology of Computer Aided Design28 2.0 Compulsory FMC Examination
F05D3110
Aircraft Technology24 1.5
Elective
(in Chinese)MC Examination
the 6th Semester
Code Title Hours Credits Note Type Evaluation
E07D309I A
Practice of Mechanical Design A160 4.0 Compulsory FMC Examination
E05C311I
Design Aircraft Structure Design48 3.0 Compulsory FMC Examination
E05C3120 Aircraft General Design
48 2.5 Elective(in Chinese)
FMC Examination
E05C3210
Flight Dynamics44 2.5
Elective
(in Chinese)FMC Examination
F05D312I
Helicopter General Design24 1.5 Compulsory MC Examination
F05D341I
Computational Fluid Dynamics36 2.0 Compulsory MC Examination
F05D3420
Viscous Fluid Mechanics32 2.0
Elective
(in Chinese)MC Examination
the 7thSemester
Code Title Hours Credits Note Type Evaluation
G05D312ISpecialty Course Design
3wks 3.0 Compulsory PC Test
F05D888I
Helicopter Flight Dynamics36 2.0 Compulsory MC Examination
F05D336I
Experimental Fluid Mechanics32 2.0 Compulsory MC Examination
F05D441I
Fundamentals of Hypersonic Aerodynamics32 2.0 Compulsory MC Examination
F05D413I
Aero-elastic Design16 1.0 Compulsory MC Examination
F05d4110
Aircraft Components Design24 1.5
Elective
(in Chinese)MC Examination
the 8thSemester
Code Title Hours Credits Note Type Evaluation
G05D4010
Graduation Thesis16wks 8.0 Compulsory PC Test
Explanation of course types:
NSC:Natural Science Courses () HC: Humanities Courses ()
ETC: Engineering Technology Courses () FMC: Fundamental Major Courses ()MC: Major Courses () PC: Practice Courses ()
-
7/25/2019 BUAA Ungraduate Programs Taught in English
9/21
- 7 -
Bachelor Program of Computer Science and Engineering
Introduction to School of Computer Science and Engineering:
School of Computer Science and Engineering (SCSE) of Beihang University (originally Department of
Electronic Engineering), with a history of over 50 years, has been attaching great importance to theintegration of professional knowledge and all-round quality, theory and practice, meanwhile advocating a
serious, pioneering and innovative study atmosphere in which a large number of excellent talents are
produced.
SCSE has145 faculty and staff members, including one member of the Chinese Academy of Sciences, 29
professors (including 19 doctoral supervisors), 8 part-time doctoral supervisors, and 58 associate professors.
SCSE has developed many distinctive and predominant research areas in the fields of Computer Science
Theory and Foundation, Cooperative Working Environment under New Generation Internet, Software
Engineering and Process Engineering, Domain-Oriented Software Support Techniques and Environment,
Virtual Reality Technology, Large Scale Information Technology, Multimedia and Digital Image Processing,
High Performance Computer and Network Technology, Embedded System and Fault-tolerance Technique,
Computer Network and Information Security, and etc.
SCSE has established long-standing cooperative relationships with universities in USA, Germany, Britain,
Japan Hong Kong and multinational corporations in Intel, IBM, Microsoft, Quantum, AMD, Nokia as well as
domestic corporations in Huawei, Lenovo, Digitalchina, Langchang and etc.
Education Curriculum
the 1stSemester
Code Title Hours Credits Note Type Evaluation
A09A101I
(1)
Advanced Mathematics for Engineering (1)90 6 Compulsory NSC Examination
B25D111I
Introduction to China16 1 Compulsory HC Examination
B25D116I (1)
Chinese (1)64 3 Compulsory HC Examination
C05D101I B
Introduction to Aeronautics and Astronautics B26 2 Compulsory ETC Examination
C06D101I
University Computer Foundation44 2 Compulsory ETC Examination
C32D101I
Engineering Experience and Cognition
20 0.5 Compulsory ETC Test
E06B111I
Introduction to Computer Science & Computer32 2 Compulsory FMC Examination
the 2ndSemester
Code Title Hours Credits Note Type Evaluation
A09A102I (2)
Advanced Mathematics (2)86 5 Compulsory NSC Examination
A09A103I
Advanced Algebra112 6 Compulsory NSC Examination
A19A101I (1)
University Physics for Engineering (1)64 4 Compulsory NSC Examination
B25D117I
(2)
Chinese (2)64 3 Compulsory HC Examination
-
7/25/2019 BUAA Ungraduate Programs Taught in English
10/21
- 8 -
C25D121IC
C Programming Language48 2.5 Compulsory ETC Examination
the 3rdSemester
Code Title Hours Credits Note Type Evaluation
A09B204I
A
Probability Statistics A 64 4 Compulsory NSC Examination
A19A202I (2)
University Physics for Engineering (2)64 4 Compulsory NSC Examination
A19A103I B (1)Fundamental Physics Experiments B (1)
28 1.5 Compulsory NSC Examination
E06B213I
Data Structure64 4 Compulsory FMC Examination
E06B214I
Algorithm Design and Analysis
32 2 Compulsory FMC Examination
E06B315I
Operating System
48 3 Compulsory FMC Examination
the 4th Semester
Code Title Hours Credits Note Type Evaluation
A19A104I B (2)
Fundamental Physics Experiments B (2)24 1.5 Compulsory NSC Examination
E06B216IJava
Object Oriented ModelingJava48 3 Compulsory MC Examination
E06B313I
Database Principles32 2 Compulsory FMC Examination
E06B215I
Principles of Computer Organization & System
Architecture
48 3 Compulsory FMC Examination
G06B282I
Principles of Computer Organization & System
Architecture (Laboratory)
32 2 Compulsory PC Test
E06B312I
Software Engineering32 2 Compulsory FMC Examination
the 5thSemester
Code Title Hours Credits Note Type Evaluation
F06D273IC++ C#
C++ & C# Programming Language32 2 Compulsory FMC Examination
F06D348I
Video Processing Foundation & Application32 2 Compulsory MC Examination
E06B314I
Computer Network48 3 Compulsory FMC Examination
G06B384I
Computer Network ( Laboratory)
32 2 Compulsory PC Test
F06D442I
Multimedia Technology32 2 Compulsory MC Examination
-
7/25/2019 BUAA Ungraduate Programs Taught in English
11/21
- 9 -
F06D423I
Software Testing32 2 Compulsory FMC Examination
the 6thSemester
Code Title Hours Credits Note Type Evaluation
F06D343I
Image Processing & Pattern Recognization
48 3 Compulsory MC Examination
F06D327I
Computer Vision Computation48 3 Compulsory MC Examination
F06D345I
Introduction to IOT (Internet Of Things)
48 3 Compulsory MC Examination
F06D326I
Software Process Principles48 3 Compulsory MC Examination
the 7
th
Semester
Code Title Hours Credits Note Type Evaluation
F06D493I
Paper & Report Writing16 1 Compulsory MC Examination
F06D447I
Software Design for Mobile Phone32 2 Compulsory MC Examination
F06D448I
New Techniques for Internet Software48 3 Compulsory MC Examination
F06D348I
Data Mining32 2 Compulsory MC Examination
F06D328I
Computational Intelligence32 2 Compulsory MC Examination
the 8thSemester
Code Title Hours Credits Note Type Evaluation
G06D401I
Graduation Thesis16wks 8 Compulsory PC Test
Explanation of course types:NSC:Natural Science Courses () HC: Humanities Courses ()
ETC: Engineering Technology Courses () FMC: Fundamental Major Courses ()
MC: Major Courses () PC: Practice Courses ()
-
7/25/2019 BUAA Ungraduate Programs Taught in English
12/21
- 10 -
Bachelor Program ofMechanical Engineering and Automation
Introduction to School of Mechanical Engineering and Automation:
School of Mechanical Engineering and Automation (SMEA), BeiHang University (BUAA) was founded
in 1998, based on the Department of Manufacturing Engineering and Department of Electromechanical
Engineering, with the origins of the specialties of Aircraft Manufacturing, Aircraft Engine Manufacturing
Process and Aircraft Instruments, traced back to 1950s.
SMEA covers 7 disciplines including Mechanical Design and Theory, Mechanical Manufacturing and
Automation, Mechatronical Engineering, Industrial and Manufacturing System Engineering, Aircraft
Manufacturing Engineering, Material Processing and Control Engineering, and Industrial Design. Among the
disciplines above, Mechanical Design and Theory and Mechanical Manufacturing and Automation, are
approved of the State Key Discipline, and the posts of Special Professor of Cheung Kong Scholars Program
are available in these two disciplines. All the disciplines offer the programs of Ph.D. MSc. MEng., as well as
postdoctoral research positions.Currently, there are 170 faculty and staff members, including 1 academician of Chinese Academy of
Engineering, 1 young outstanding professor awarded the title of Changjiang scholar, 45 professors and 60
associate professors. There are 1400 enrolled students totally in SMEA, including 800 undergraduates, 600
graduate students.
In SMEA there are the National Key Laboratory of Robotics, the National Key Laboratory of Design
Automation, the Laboratory of Flexible Manufacturing System for China Hi-Tech R&D Plan, Beijings Key
Laboratory of Digitalized Design and Manufacturing, and the National 211Project Research Centers of
Digital Design and Manufacturing, Advanced Machining Technology, Advanced Technology of Sheet
Forming, Advanced Robotics, as well as Teaching and Training Centers of CAD/CAM, Fundamentals of
Mechanical Design, etc.
The research activities in SMEA mainly focus on the following areas: Mechanism Theory, Advanced
Robotics, Modern Design Theory and Digital Design of Products, Novel Transmission System, Advanced
Sheet Forming Process and Equipment, Quality Engineering, Manufacturing Scheduling and Execution
System, Computer Numerical Control and Servo Systems, Industrial Process Measurement and Equipment,
Non-destructive Industrial Inspection, Industrial Process Measurement and Control, Joining Process and
Equipment, MEMS,NanoMechanical Technology, etc.
Education Curriculum
the 1stSemester
Code Title Hours Credits Note Type Evaluation
A09A101I
(1)
Advanced Mathematics for Engineering (1)90 6.0 Compulsory NCS Examination
B25D111I
Introduction to China16 1.0 Compulsory HC Examination
B25D116I (1)
Chinese (1)64 3.0 Compulsory HC Examination
C05D101I B
Introduction to Aeronautics and Astronautics B26 2.0 Compulsory ETC Examination
C06D101I
University Computer Foundation44 2.0 Compulsory ETC Examination
C32D101I
Engineering Experience and Cognition20 0.5 Compulsory ETC Test
http://web.mit.edu/nanolab/http://web.mit.edu/nanolab/ -
7/25/2019 BUAA Ungraduate Programs Taught in English
13/21
- 11 -
E07B103I B
Engineering Graphics B64 4.0 Compulsory FMC Examination
the 2ndSemester
Code Title Hours Credits Note Type Evaluation
A09A102I
(2)
Advanced Algebra for Engineering (2) 86 5.0 Compulsory NCS Examination
A09A103I
Advanced Algebra112 6.0 Compulsory NCS Examination
A19A101I (1)
University Physics for Engineering (1)64 4.0 Compulsory NCS Examination
B25D117I
(2)
Chinese (2)64 3.0 Compulsory HC Examination
C25D121IC
C Programming Language48 2.5 Compulsory ETC Examination
G32A201I A
Mechanical Technology Practice A140 3.5 Compulsory ETC Test
the 3rdSemester
Code Title Hours Credits Note Type Evaluation
A09B204I A
Probability Statistics A64 4.0 Compulsory NCS Examination
A19A202I (2)
University Physics for Engineering (2)64 4.0 Compulsory NCS Examination
A19A103I B(1)Fundamental Physics Experiments B(1)
28 1.5 Compulsory NCS Examination
E02B231I
Circuits Analysis64 4.0 Compulsory FMC Examination
E05B203I A(1)Mechanics of Materials A(1)40 2.5 Compulsory FMC Examination
E05B201I A(1)
Theoretical Mechanics A(1)64 4.0 Compulsory FMC Examination
the 4thSemester
Code Title Hours Credits Note Type Evaluation
A19A104I B(2)
Fundamental Physics Experiments B(2)24 1.5 Compulsory NCS Examination
E05B204I A(2)
Mechanics of Materials A(2)58 3.5 Compulsory FMC Examination
E05B202I A(2)Theoretical Mechanics A(2)26 1.5 Compulsory FMC Examination
E07B203ITheory to Machines and Mechanism
54 2.5 Compulsory FMC Examination
E07B211I
The Science of Engineering Materials34 2.0 Compulsory FMC Examination
G32A204I
Electronic Technology Practice80 2.0 Compulsory PC Test
the 5thSemester
Code Title Hours Credits Note Type Evaluation
E02B334I Digital Circuit
56 3.5 Compulsory FMC Examination
E07B304I
Mechanical Design64 3.0 Compulsory FMC Examination
-
7/25/2019 BUAA Ungraduate Programs Taught in English
14/21
- 12 -
E07B313I
Fundamentals of Manufacturing Engineering34 2.0 Compulsory FMC Examination
E07D321I
Hydrodynamics and Hydraulic Transmission38 2.5 Compulsory FMC Examination
E07B314I
Fundamentals of Robotics46 2.5 Compulsory FMC Examination
the 6thSemester
Code Title Hours Credits Note Type Evaluation
B
Analysis Circuit B64 3.5 Compulsory FMC Examination
E07D309I A
Practice of Mechanical Design A160 4.0 Compulsory FMC Examination
E07B316I
Fundamental of Measurement Technology34 2.0 Compulsory FMC Examination
E07B315I
Control Engineering Technology34 2.0 Compulsory FMC Examination
F07C422I
Advanced Processing Technology and Equipment48 3.0 Compulsory MC Examination
the 7thSemester
Code Title Hours Credits Note Type Evaluation
F07C412IPhilosophy of Mechanical Design
32 2.0 Compulsory MC Examination
F07C443I
Computer Aided Manufacturing48 3.0 Compulsory MC Examination
F07C321IMachine-Building Technology
48 3.0 Compulsory MC Examination
F07C881I
Computer Control System32 2.0 Compulsory MC Examination
G07D412I
Specialty Course Design80 2.0 Compulsory PC Examination
the 8thSemester
Code Title Hours Credits Note Type Evaluation
G07D4010Graduation Thesis
16wks 8.0 Compulsory PC Test
Explanation of course types:
NCS:Natural Science Courses () HC: Humanities Courses ()
ETC: Engineering Technology Courses () FMC: Fundamental Major Courses ()
MC: Major Courses () PC: Practice Courses ()
-
7/25/2019 BUAA Ungraduate Programs Taught in English
15/21
- 13 -
Bachelor Program of International Economics and Trade
Introduction to School of Economics and Management:
School of Economics & Management of Beihang University (BUAA), originally established in 1956 as a
Department of Aeronautic Engineering Economics, is one of the first founded Management Schools amongtechnology and engineering based universities in China. Over the past 50 years, the School has achieved her
nationwide prestige in scientific research and training program. With more than 5000 B.S., M.S., and PhD
Degree students graduated from the school, the school has been providing excellent and talented management
experts and economists in various areas, working industriously for development of aeronautic and astronautic
industries as well as other key industries and business sectors in national economy. The school consists of
seven Departments: Business Administration, Information System, Management Science and Engineering,
International Economics and Trade, Insurance & Risk Management, Finance, and Accounting.
There are four major research centers in the School. 4 laboratories are running at the School. The school
also owns one a 350 square meter library with more than 50 international journals in academic and business
management fields (English version) and more than 100 domestic published key journals in management and
economics. More than 10000 English and Chinese version of professional books are collected in the library.
PhD thesis and master degree thesis of the School graduates for past 20 years are also collected in the library.
Education Curriculum
the 1stSemester
Code Title Hours Credits Note Type Evaluation
A09A101I
(1)
Advanced Mathematics for Engineering (1)90 6.0 Compulsory NCS Examination
B25D111I Introduction to China
16 1.0 Compulsory HC Examination
B25D116I (1)
Chinese (1)64 3.0 Compulsory HC Examination
C05D101I B
Introduction to Aeronautics and Astronautics B26 2.0 Compulsory ETC Examination
C06D101I
Basic Knowledge of Computer44 2.0 Compulsory ETC Examination
C32D101I
Engineering Experience and Cognition20 0.5 Compulsory ETC Test
E08B112I
Management48 3.0 Compulsory FMC Examination
the 2ndSemester
Code Title Hours Credits Note Type Evaluation
A09A102I (2)
Advanced Mathematics (2)86 5.0 Compulsory NCS Examination
A09A103I
Advanced Algebra112 6.0 Compulsory NCS Examination
B25D117I
(2)
Chinese (2)64 3.0 Compulsory HC Examination
C25D121IC
C Programming Language48 3.0 Compulsory ETC Examination
E08B113I Accounting
48 3.0 Compulsory FMC Examination
G08D111I
Course Design (Accounting)8 0.5 Compulsory PC Test
-
7/25/2019 BUAA Ungraduate Programs Taught in English
16/21
- 14 -
the 3rdSemester
Code Title Hours Credits Note Type Evaluation
A09B204I A
Probability Statistics A64 4.0 Compulsory NCS Examination
B25D118I
(3)
Chinese (3) 64 3.0 Compulsory HC Examination
E08B211I
Microeconomics64 4.0 Compulsory FMC Examination
F08C222I
International Trade48 3.0 Compulsory MC Examination
F08D351I
International Business English40 2.5 Compulsory MC Examination
the 4thSemester
Code Title Hours Credits Note Type Evaluation
B25D119I
(4)
Chinese (4) 64 3.0 Compulsory HC Examination
E08B212I
Macroeconomics64 4.0 Compulsory FMC Examination
E08B213IApplied statistics
64 4.0 Compulsory FMC Examination
E08B214I
Operations Research64 4.0 Compulsory FMC Examination
F08C323IFinancial Institution Management
32 2.0 Compulsory MC Examination
F08C213I
Financial Management48 3.0 Compulsory MC Examination
G08D211I Course Design ( Applied Statistics)8 0.5 Compulsory PC Test
G08D213I
Course Design (Financial Management)8 0.5 Compulsory PC Test
G08D212I()
Course Design (Operations Research)8 0.5 Compulsory PC Test
the 5thSemester
Code Title Hours Credits Note Type Evaluation
B25D122I (1)
International Business Chinese (1)64 4.0 Compulsory HC Examination
E08B224I Organization Behavior
32 2.0 Compulsory FMC Examination
F08C322IInternational Finance
48 3.0 Compulsory MC Examination
F08D353I
International Business Law48 3.0 Compulsory MC Examination
F08C324IInvestment
48 3.0 Compulsory MC Examination
G08D324I ()
Course Design (Investment)8 0.5 Compulsory PC Test
G08D321I
Curriculum project International Business Law8 0.5 Compulsory PC Test
-
7/25/2019 BUAA Ungraduate Programs Taught in English
17/21
- 15 -
the 6thSemester
Code Title Hours Credits Note Type Evaluation
B25D123I (2)
International Business Chinese (2)48 3.0 Compulsory HC Examination
F08C326I
Econometrics64 4.0 Compulsory MC Examination
F08D359I
International Business Correspondence32 2.0 Compulsory MC Examination
F08B322B
Marketing48 3.0 Compulsory MC Examination
F08C327I
International Investment & MultinationalCorporation Management
40 2.5 Compulsory MC Examination
F08D352I
Practice of International Trade48 3.0 Compulsory MC Examination
G08D311I
Course Design (Marketing)8 0.5 Compulsory PC Test
G08D327I ()Course Design (Multinational Corporation)8 0.5 Compulsory PC Test
the 7thSemester
Code Title Hours Credits Note Type Evaluation
F08D352IInternational Technology Trade
48 3.0 Compulsory MC Examination
F08D455IExcel
Application of Excel in the corporate finance40 2.5 Compulsory MC Examination
F08D362IManagement Communication
32 2.0 Compulsory MC Examination
F08D365I
International Business Ethics and Cultural Conflicts32 2.0 Compulsory MC Examination
F08D351I
Financial Derivative32 2.0 Compulsory MC Examination
the 8thSemester
Code Title Hours Credits Note Type Evaluation
G08D0410Graduation Thesis
16wks 8.0 Compulsory PC Test
Explanation of course types:
NSC:Natural Science Courses () HC: Humanities Courses ()
ETC: Engineering Technology Courses () FMC: Fundamental Major Courses ()
MC: Major Courses () PC: Practice Courses ()
-
7/25/2019 BUAA Ungraduate Programs Taught in English
18/21
- 16 -
Bachelor Program of Civil Engineering
Introduction to Department of Civil Engineering:
Established in 1999, the Department of Civil Engineering at Beihang University is committed to offering
a broad range of high-quality educational programs and state-of-the-art research opportunities within the field.Our educational programs in both undergraduate and graduate level provide students a sound foundation in
the fundamentals of science and engineering coupled with proficient technical expertise in specialized fields,
preparing students for leadership in the profession of civil engineering. Our interdisciplinary research
activities give students a variety of opportunities to work on problems beyond traditional areas of the field.
Currently there are 18 full-time faculty members in the Department of Civil Engineering dedicated to the
education of more than 200 undergraduate students and 80 graduate students. All faculty members including 6
professors, 6 associate professors and 6 lecturers, earn the PhD degree from the most prestigious universities
in China and oversea. 90% of our faculty members have research experience abroad in U.S., Europe and
Japan. The department also has ten adjunct professors from other top universities and research institutions
across the country, including a member of Chinese Academy of Engineering.
There are four fully-equipped laboratories in the Department of Civil Engineering facilitating the
education and research need. Through the extensive training in the Structural Engineering Laboratory,
Geotechnical Engineering Laboratory, Construction Materials Laboratory and Surveying Information
Technology Laboratory, students earn hands-on experience in broad fields of specialization in civil
engineering.
The interdisciplinary research in the Department of Civil Engineering attracts significant support from
the governmental and provincial foundation and corporate collaboration funds. The faculties also remain
active research collaborations with internationally renowned researchers in U.S., Europe and Japan. Our
faculties are actively engaged in the following research areas: advanced structural analysis, constitutivetheory of rock/soil materials and slope stability analysis, chemistry in rock materials, durability of
cement-based materials, structural health monitoring of infrastructure, safety study and durability of airport
pavement, structural modeling and numerical simulations, smart materials in civil engineering and advanced
geomatics technologies.
Education Curriculum
the 1stSemester
Code Title Hours Credits Note Type Evaluation
A09A101I
(1)Advanced Mathematics for Engineering (1)
90 6.0 Compulsory NSC Examination
B25D111IIntroduction to China
16 1.0 Compulsory HC Examination
B25D116I (1)
Chinese (1)64 3.0 Compulsory HC Examination
C05D101I BIntroduction to Aeronautics and Astronautics B
26 2.0 Compulsory ETC Examination
C06D101I
University Computer Foundation44 2.0 Compulsory ETC Examination
C32D101I
Engineering Experience and Cognition20 0.5 Compulsory ETC Test
E07B101I
Descriptive Geometry50 2.5 Compulsory FMC Examination
-
7/25/2019 BUAA Ungraduate Programs Taught in English
19/21
- 17 -
the 2ndSemester
Code Title Hours Credits Note Type Evaluation
A09A102I (2)
Advanced Algebra for Engineering (2)86 5.0 Compulsory NSC Examination
A09A103I
Advanced Algebra 112 6.0 Compulsory NSC Examination
A19A101I (1)
University Physics for Engineering (1)64 4.0 Compulsory NSC Examination
B25D117I
(2)
Chinese (2)64 3.0 Compulsory HC Examination
C25D121IC
C Programming Language48 2.5 Compulsory ETC Examination
F13D171I AutoCAD
Architectural Engineering Drawing and AutoCAD24 1.5 Compulsory MC Examination
F13D061I
Introduction to Civil Engineering16 1.0 Compulsory MC Examination
the 3rdSemester
Code Title Hours Credits Note Type Evaluation
A09B204I A
Probability Statistics A64 4.0 Compulsory NSC Examination
A19A202I (2)
University Physics for Engineering (2)64 4.0 Compulsory NSC Examination
A19A103I B(1)Fundamental Physics Experiments B(1)
28 1.5 Compulsory NSC Examination
E02B231I
Circuits Analysis64 4.0 Compulsory FMC Examination
E05B203I A(1)Mechanics of Materials A(1)40 2.5 Compulsory FMC Examination
E05B201I A(1)
The Principles of Automatic Control A(1)64 4.0 Compulsory FMC Examination
E13C261I
Surveying40 2.5 Compulsory FMC Examination
G32A201I A
Mechanical Technology Practice A140 3.5 Compulsory PC Test
the 4th Semester
Code Title Hours Credits Note Type Evaluation
A19A104I B(2)Fundamental Physics Experiments B(2)
24 1.5 Compulsory NSC Examination
E05B204I A(2)Mechanics of Materials A(2)
58 3.5 Compulsory FMC Examination
E05B202I A(2)
The Principles of Automatic Control A(2)26 1.5 Compulsory FMC Examination
E13C262I
Civil Engineering Materials56 3.5 Compulsory FMC Examination
E13C271I(I)
Structural Mechanics (I)48 3.0 Compulsory FMC Examination
G32A204I
Electronic Technology Practice80 2.0 Compulsory PC Test
-
7/25/2019 BUAA Ungraduate Programs Taught in English
20/21
- 18 -
the 5thSemester
Code Title Hours Credits Note Type Evaluation
E13C272I (II)
Structural Mechanics (II)32 2.0 Compulsory FMC Examination
E13C372I
Soil Mechanics 48 3.0 Compulsory FMC Examination
E13C361I
Design Principles of Structural Concrete Members64 4.0 Compulsory FMC Examination
F13D361I
Engineering Geology32 2.0 Compulsory MC Examination
F13D362I
Building Architecture48 3.0 Compulsory MC Examination
F13D363I
Mechanics of Elasticity32 2.0 Compulsory MC Test
the 6thSemester
Code Title Hours Credits Note Type Evaluation
E13C362IDesign of Reinforced Concrete Structure and
Masonry Structure40 2.5 Compulsory FMC Examination
E13C363I
Basis of Steel Structural Design56 3.5 Compulsory FMC Examination
E13C364ICivil Engineering Construction
56 3.5 Compulsory FMC Examination
E13C365I
High-rise Building Structures24 1.5 Compulsory FMC Examination
E13C366IFoundation Engineering
32 2.0 Compulsory FMC Examination
G13C364I()
Course Design of Civil Engineering Construction40 1.0 Compulsory PC Test
the 7thSemester
Code Title Hours Credits Note Type Evaluation
F13D471I
Construction Project Management16 1.0 Compulsory MC Examination
F13D461I
Earthquake-resistant Structures32 2.0 Compulsory MC Examination
F13D472I
Testing of Building Structures16 1.0 Compulsory MC Examination
F13D466I
Timber Structures32 2.0 Compulsory MC Examination
F13D473I
Structural Types of Buildings16 1.0 Compulsory MC Test
F13D474I
Introduction to Design Software in CivilEngineering
16 1.0 Compulsory MC Test
F13D464I
Decorative Materials for Buildings16 1.0 Compulsory MC Test
the 8thSemester
Code Title Hours Credits Note Type Evaluation
G13D4010
Graduation Thesis16wks 8.0 Compulsory PC Test
-
7/25/2019 BUAA Ungraduate Programs Taught in English
21/21
Explanation of course types:
MC: Major Courses () PC: Practice Courses ()
NSC:Natural Science Courses () HC: Humanities Courses ()
ETC: Engineering Technology Courses () FMC: Fundamental Major Courses ()