BS Codes List

BRITISH STANDARDS

BS 3900:-Methods of test for paints

BS 3900:Group F:-Durability tests on paint films

BS 3900-F21:-

Determination of resistance to humidity. Procedure for exposing test specimens in condensation-water atmospheresSee BS EN ISO 6270-2.

BS 4729:2005

Clay and calcium silicate bricks of special shapes and sizes. Recommendationssupersedes BS 4729:1990 which remains currentISBN 0 580 46694 9

£64.00 members£128.00 non-members

B/519

BS 6068:-Water quality

BS 6068-2:-

Physical, chemical and biochemical methods

BS 6068-2.94:-

Determination of selected phthalates using gas chromatography/mass spectrometrySee BS EN ISO 18856.

BS 6230:2005

Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases)supersedes BS 6230:1991ISBN 0 580 46800 3


GSE/30

BS 6262:-Glazing for buildings

BS 6262-1:2005

General methodology for the selection of glazingpartially supersedes BS 6262:1982ISBN 0 580 46774 0


B/520/4

BS 6262-2:2005

Code of practice for energy, light and soundpartially supersedes BS 6262:1982ISBN 0 580 46775 9


B/520/4

BS 6262-3:2005

Code of practice for fire, security and wind loadingpartially supersedes BS 6262:1982ISBN 0 580 46773 2


B/520/4

BS 6262-4:2005

Code of practice for safety related to human impactsupersedes BS 6262-4:1994ISBN 0 580 46772 4


B/520/4

BS 6262-6:2005

Code of practice for special applicationspartially supersedes BS 6262:1982ISBN 0 580 46771 6


B/520/4

BS 6810:-Determination of metals in textiles

BS 6810-2:2005

Analysis by atomic emission spectroscopyno current standard is supersededISBN 0 580 15878 0


TCI/80

BS 7121:-

Code of practice for safe use of cranes

BS 7121-14:2005Side boom pipelayers

no current standard is supersededISBN 0 580 46753 8


MHE/3/11

BS 7533:-

Pavements constructed with clay, natural stone or concrete pavers

BS 7533-3:2005

Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavementssupersedes BS 7533-3:1997ISBN 0 580 46776 7


B/507

BS 7870:-

LV and MV polymeric insulated cables for use by distribution and generation utilities

BS 7870-3:-

Specification for distribution cables of rated voltage 0.6/1 Kv

BS 7870-3.50:2005

XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire. (Implementation of HD 603)no current standard is supersededISBN 0 580 46755 4


GEL/20/16

BS 7883:2005

Code of practice for the design, selection installation, use and maintenance of anchor devices conforming to BS EN 795supersedes BS 7883:1997ISBN 0 580 46779 1


PH/5

BS 8414:-

Fire performance of external cladding systems

BS 8414-2:2005

Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frameno current standard is supersededISBN 0 580 46754 6


FSH/21

of 75BRITISH STANDARDS

BS 8461:2005

Football goals. Code of practice for their procurement, installation, maintenance, storage and inspectionno current standard is supersededISBN 0 580 46756 2


SW/14

BS 8462:2005

Goals for youth football, futsal, mini-soccer and small-sided football. Specificationsupersedes PAS 36:2000 Parts 1 & 2ISBN 0 580 46757 0


SW/14

BS EN PUBLICATIONS

BS EN ISO 1133:2005

Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplasticssupersedes BS EN ISO 1133:2000ISBN 0 580 46474 1


PRI/21

BS EN 1143:-

Secure storage units. Requirements, classification and methods of test for resistance to burglary

BS EN 1143-1:2005

Safes, ATM safes, strongroom doors and strongroomssupersedes BS EN 1143-1:1997ISBN 0 580 46704 X


GW/2

BS EN 1304:2005

Clay roofing tiles and fittings. Product definitions and specificationssupersedes BS EN 1304:1998ISBN 0 580 46160 2


B/542/3

BS EN 1307:2005

Textile floor coverings. Classification of pile carpetssupersedes BS EN 1307:1997ISBN 0 580 46523 3


PRI/3

BS EN 1814:2005

Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum testsupersedes BS EN 1814:1998ISBN 0 580 46726 0


PRI/3

BS EN 1929:-Basket trolleys

BS EN 1929-3:2005

Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facilityno current standard is supersededISBN 0 580 46558 6


CW/51

BS EN 1929-4:2005

Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyorsno current standard is supersededISBN 0 580 46557 8


CW/51

BS EN 2089:2005

Aluminium alloy AL-P2014A T6 or T62. Sheet and strip. 0,4 mm $3L a $3L 6 mmsupersedes BS EN 2089:1994ISBN 0 580 46293 5


ACE/61/-/24

BS EN 2090:2005

Aluminium alloy AL-P2024-T3. Clad sheet and strip. 0,3 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46304 4


ACE/61/-/24

BS EN 2395:2005

Aerospace series. Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip. 0,4 mm $3La $3L6 mmsupersedes BS EN 2395:1994ISBN 0 580 46350 8


ACE/61/-/24

BS EN 2422:2005

Aluminium alloy AL-P2124-T351. Plate. 25 mm $0L a $3L 120 mmno current standard is supersededISBN 0 580 46302 6


ACE/61/-/24

BS EN 2511:2005

Aluminium alloy AL-P7075-T7351. Plate. 6 mm $0L a $3L 100 mmno current standard is supersededISBN 0 580 46306 0


ACE/61/-/24

BS EN 2693:2005

Aerospace series. Aluminium alloy AL-P5086-H111. Sheet and strip. 0,3 mm $3La $3L6 mmsupersedes BS EN 2693:1994ISBN 0 580 46327 3


ACE/61/-/24

BS EN 2694:2005

Aerospace series. Aluminium alloy AL-P6061-T6 or T62. Sheet and strip. 0,4 mm $3L a $3L 6 mmsupersedes BS EN 2694:1994ISBN 0 580 46347 8


ACE/61/-/24

of 75BS EN PUBLICATIONS

BS EN 2695:2005

Aerospace series. Aluminium alloy AL-P6081-T6. Sheet and strip. 0,3 mm $3La $3L6 mmsupersedes BS EN 2695:1994ISBN 0 580 46324 9


ACE/61/-/24

BS EN 2696:2005

Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Sheet and strip. 0,4 mm $3La $3L6 mmsupersedes BS EN 2696:1994ISBN 0 580 46323 0


ACE/61/-/24

BS EN 2703:2005

Aluminium alloy AL-P2024-T4 or T42. Clad sheet and strip. 0,3 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46297 8


ACE/61/-/24

BS EN 2732:2005

Magnesium alloy MG-C46001-T6. Chill castingno current standard is supersededISBN 0 580 46310 9


ACE/61/-/24

BS EN 2802:2005

Aluminium alloy AL-P7475-T761. Sheet and strip. 0,6 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46309 5


ACE/61/-/24

BS EN 2803:2005

Aerospace series. Aluminium alloy AL-P7475-T761. Clad sheet and strip. 1,0 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46317 6


ACE/61/-/24

BS EN 3333:2005

Aluminium alloy AL-P7475-T762. Sheet and strip. 0,6 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46352 4


ACE/61/-/24

BS EN 3335:2005

Aluminium alloy AL-P7475-O2. Sheet for superplastic forming (SPF). 0,8 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46355 9


ACE/61/-/24

BS EN 3341:2005

Aluminium alloy AL-P6061-T4 or T42. Sheet and strip. 0,4 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46354 0


ACE/61/-/24

BS EN 3552:2005

Aluminium alloy AL-P2618A-T6 or T62. Clad sheet and strip. 0,4 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46356 7


ACE/61/-/24

BS EN ISO 3815:-Zinc and zinc alloys

BS EN ISO 3815-2:2005

Analysis by inductively coupled plasma optical emission spectrometrysupersedes BS EN 12019:1998ISBN 0 580 46795 3


NFE/8

BS EN 3872:2005

Aerospace series. Aluminium alloy AL-R39002-H112. Die forgings. a $3L 200mmno current standard is supersededISBN 0 580 46311 7


ACE/61/-/24

BS EN 4007:2005

Aluminium alloy AL-P6082-T6 or T62. Sheet and strip. 0,4 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46296 X


ACE/61/-/24

BS EN 4099:2005

Aluminium alloy AL-P2219-T6 or T62. Clad sheet and strip. 0,5 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46295 1


ACE/61/-/24

BS EN 4100:2005

Aluminium alloy AL-P2219-T6 or T62. Sheet and strip. 0,5 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46349 4


ACE/61/-/24

BS EN 4101:2005

Aluminium alloy AL-P2024-T4. Sheet and strip with improved stretch forming capability. 0,4 mm $3L a $3L 6 mmno current standard is supersededISBN 0 580 46299 4


ACE/61/-/24

BS EN 4102:2005

Aerospace series. Aluminium alloy AL-P2219-T81. Clad sheet and strip. 0,5 mm $3La $3L6 mmno current standard is supersededISBN 0 580 46348 6


ACE/61/-/24

BS EN 4202:2005

Aerospace series. Aluminium alloy AL-P6082-T651. Plate. 6 mm <a $3L25 mmno current standard is supersededISBN 0 580 46305 2


ACE/61/-/24


BS EN 4211:2005

Aerospace series. Aluminium alloy AL-P2024-T42. Clad plate. 6mm < a $3L 25mmno current standard is supersededISBN 0 580 46313 3


ACE/61/-/24

BS EN 4212:2005

Aerospace series. Aluminium alloy AL-P5086-H111. Plate. 6mm < a $3L8 0mmno current standard is supersededISBN 0 580 46314 1


ACE/61/-/24

BS EN 4213:2005

Aerospace series. Aluminium alloy AL-P6061-T651. Plate. 6mm <a $3L 80mmno current standard is supersededISBN 0 580 46325 7


ACE/61/-/24

BS EN 4214:2005



ACE/61/-/24

BS EN 4215:2005



ACE/61/-/24

BS EN 4247:2005

Aerospace series. Aluminium alloy AL-P2024-T42. Plate. 6 mm <a $3L140 mmno current standard is supersededISBN 0 580 46301 X


ACE/61/-/24

BS EN 4286:2005

Aerospace series. Aluminium alloy AL-P8090-T89. Die forgings. a $3L 125 mmno current standard is supersededISBN 0 580 46319 2


ACE/61/-/24

BS EN 4291:2005

Aerospace series. Aluminium alloy AL-P8090. Forging stockno current standard is supersededISBN 0 580 46318 4


ACE/61/-/24

BS EN 4292:2005

Aerospace series. Aluminium alloy AL-R39002. Forging stockno current standard is supersededISBN 0 580 46312 5


ACE/61/-/24

BS EN 4313:2005

Aerospace series. Aluminium alloy AL-P6013-T6. Sheet and strip. 0,5 mm $3La $3L6 mmno current standard is supersededISBN 0 580 46307 9


ACE/61/-/24

BS EN 4408:-

Aerospace series. Technical drawings. Representation of parts made of composite materials

BS EN 4408-1:2005General rules



ACE/65/-/64

BS EN 4408-2:2005Laminated parts



ACE/65/-/64

BS EN 4408-3:2005Parts including core materials



ACE/65/-/64

BS EN 4408-4:2005Items obtained by winding



ACE/65/-/64

BS EN 4408-5:2005Seams



ACE/65/-/64

BS EN 4408-6:2005Preforms



ACE/65/-/64

BS EN 4450:2005

Aerospace series. Aluminium alloy AL-P7050-T762. Sheet. 0,8 mm $3La $3L6 mmno current standard is supersededISBN 0 580 46308 7


ACE/61/-/24

BS EN ISO 6218:2005

Inland navigation vessels. Manually operated coupling devices for push tows. Safety requirements and main dimensionsno current standard is supersededISBN 0 580 46723 6


SME/32/7

BS EN ISO 6270:-

Paints and varnishes. Determination of resistance to humidity


BS EN ISO 6270-2:2005(BS 3900-F21:2005)

Procedure for exposing test specimens in condensation-water atmospheresno current standard is supersededISBN 0 580 46496 2


STI/10

BS EN ISO 6416:2005

Hydrometry. Measurement of discharge by the ultrasonic (acoustic) methodsupersedes BS 3680-3E:1993ISBN 0 580 46676 0


CPI/113/1

BS EN ISO 7438:2005Metallic materials. Bend test

supersedes BS EN ISO 7438:2000ISBN 0 580 46375 3


ISE/NFE/4/2

BS EN ISO 9300:2005

Measurement of gas flow by means of critical flow Venturi nozzlessupersedes BS EN ISO 9300:1995ISBN 0 580 46705 8


CPI/30/2

BS EN 10226:-

Pipe threads where pressure-tight joints are made on the threads

BS EN 10226-3:2005

Verification by means of limit gaugesno current standard is supersededISBN 0 580 46117 3


ISE/19

BS EN ISO 10318:2005

Geosynthetics. Terms and definitionsno current standard is supersededISBN 0 580 46486 5


B/553

BS EN 12098:-Controls for heating systems

BS EN 12098-4:2005

Optimum start-stop control equipment for electrical systemsno current standard is supersededISBN 0 580 46788 0


RHE/16

BS EN 12098-5:2005

Start-stop schedulers for heating systemsno current standard is supersededISBN 0 580 46787 2


RHE/16

BS EN ISO 12625:-Tissue paper and tissue products

BS EN ISO 12625-1:2005General guidance on terms



PAI/11

BS EN ISO 12625-5:2005

Determination of wet tensile strengthsupersedes BS EN 12625-5:1999ISBN 0 580 46434 2


PAI/11

BS EN 12641:-

Swap bodies and commercial vehicles. Tarpaulins

BS EN 12641-1:2005Minimum requirements

supersedes BS EN 12641-1:2000ISBN 0 580 46579 9


TW/1

BS EN 13141:-

Ventilation for buildings. Performance testing of components/products for residential ventilation

BS EN 13141-7:2004

Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellingsno current standard is supersededISBN 0 580 46778 3


RHE/2

BS EN 13232:-

Railway applications. Track. Switches and crossings

BS EN 13232-4:2005Actuation, locking and detection



RAE/2/-/3

BS EN 13232-5:2005Switches



RAE/2

BS EN 13232-6:2005

Fixed common and obtuse crossingsno current standard is supersededISBN 0 580 46791 0


RAE/2/-/3

BS EN 13757:-

Communication systems for meters and remote reading of meters

BS EN 13757-4:2005

Wireless meter readout (radio meter reading for operation in the 868-870 MHz SRD band)no current standard is supersededISBN 0 580 46385 0


PEL/894


BS EN ISO 13903:2005

Animal feeding stuffs. Determination of amino acids contentno current standard is supersededISBN 0 580 46218 8


AW/10

BS EN 13956:2005

Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristicsno current standard is supersededISBN 0 580 46712 0


B/546/2

BS EN 14268:2005

Irrigation techniques. Meters for irrigation waterno current standard is supersededISBN 0 580 46703 1


AGE/30

BS EN 14399:-

High-strength structural bolting assemblies for preloading

BS EN 14399-1:2005General requirements

supersedes BS 4395:1969 Parts 1 & 2 which remain currentISBN 0 580 46543 8


FME/9

BS EN 14399-2:2005Suitability test for preloading



FME/9/1

BS EN 14399-3:2005

System HR. Hexagon bolt and nut assembliessupersedes BS 4395:1969 Parts 1 & 2 which remain currentISBN 0 580 46545 4


FME/9

BS EN 14399-4:2005

System HV. Hexagon bolt and nut assembliessupersedes BS 4395:1969 Parts 1 & 2 which remain currentISBN 0 580 46546 2


FME/9/1

BS EN 14399-5:2005Plain washers



FME/9/1

BS EN 14420:-Hose fittings with clamp units

BS EN 14420-1:2004

Requirements, survey, designation and testingno current standard is supersededISBN 0 580 46617 5


PRI/66/1

BS EN 14420-2:2004Hose side parts of hose tail

no current standard is supersededISBN 0 580 46623 X


PRI/66/1

BS EN 14420-3:2004Clamp units, bolted or pinned



PRI/66

BS EN 14420-4:2004Flange connections



PRI/66/1

BS EN 14420-5:2004Threaded connections



PRI/66/1

BS EN 14420-6:2004TW tank truck couplings



PRI/66/1

BS EN 14420-7:2004Cam locking couplings



PRI/66/1

BS EN 14420-8:2004

Symmetrical half coupling (Guillemin system)no current standard is supersededISBN 0 580 46629 9


PRI/66/1

BS EN 14584:2005

Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Planar location of AE sourcesno current standard is supersededISBN 0 580 46702 3


WEE/46

BS EN ISO 14678:2005

Adhesives. Determination of resistance to flow (sagging)no current standard is supersededISBN 0 580 46658 2


PRI/52

BS EN 14691:2005

Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Compatibility by heat conditioningno current standard is supersededISBN 0 580 46613 2


B/546/9

BS EN 14704:-

Determination of the elasticity of fabrics


BS EN 14704-1:2005Strip tests



TCI/24

BS EN 14726:2005

Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysisno current standard is supersededISBN 0 580 46792 9


NFE/35

BS EN 14763:2005

LPG equipment and accessories. Transportable refillable composite cylinders for liquefied petroleum gas (LPG). Procedure for checking before, during and after fillingno current standard is supersededISBN 0 580 46713 9


PVE/19

BS EN ISO 14924:2005

Thermal spraying. Post-treatment and finishing of thermally sprayed coatingsno current standard is supersededISBN 0 580 46656 8


STI/40

BS EN ISO 18856:2005(BS 6068-2.94:2005)

Water quality. Determination of selected phthalates using gas chromatography/mass spectrometryno current standard is supersededISBN 0 580 46760 0


EH/3/2

BS EN ISO 19019:2005

Sea-going vessels and marine technology. Instructions for planning, carrying out and reporting sea trialsno current standard is supersededISBN 0 580 46141 6


SME/32/9

BS EN ISO 21569:2005

Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Qualitative nucleic acid based methodsno current standard is supersededISBN 0 580 46376 1


AW/-/3

BS EN 50065:-

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz

BS EN 50065-4:-

Portable low voltage decoupling filters

BS EN 50065-4-7:2005Safety requirements



PEL/205

BS EN 50369:2005

Liquid tight sheathing systems for cable managementno current standard is supersededISBN 0 580 46766 C


PEL/213

BS EN 60034:-Rotating electrical machines

BS EN 60034-9:2005Noise limits

supersedes BS EN 60034-9:1998 which remains currentISBN 0 580 46510 1


PEL/2

BS EN 60068:-Environmental testing

BS EN 60068-2:-Tests

BS EN 60068-2-47:2005

Mounting of specimens for vibration, impact and similar dynamic testssupersedes BS EN 60068-2-47:2000ISBN 0 580 46448 2


GEL/104

BS EN 60086:-Primary batteries

BS EN 60086-5:2005

Safety of batteries with aqueous electrolytesupersedes BS EN 60086-5:2001 which remains currentISBN 0 580 46447 4


CPL/35

BS EN 60118:-Electroacoustics. Hearing aids

BS EN 60118-13:2005

Electromagnetic compatibility (EMC)supersedes BS EN 60118-13:1998ISBN 0 580 46515 2


EPL/29

BS EN 60143:-

Series capacitors for power systems

BS EN 60143-1:2004General

supersedes BS EN 60143-1:1993 which remains currentISBN 0 580 46430 X


PEL/33

BS EN 60254:-Lead-acid traction batteries

BS EN 60254-1:2005

General requirements and methods of testsupersedes BS EN 60254-1:1997 which remains currentISBN 0 580 46439 3


PEL/21


BS EN 60308:2005

Hydraulic turbines. Testing of control systemsno current standard is supersededISBN 0 580 46221 8


MCE/15

BS EN 60335:-

Household and similar electrical appliances. Safety

BS EN 60335-2:-Particular requirements

BS EN 60335-2-76:2005Electric fence energizers

supersedes BS EN 60335-2-76:1999 which remains currentISBN 0 580 46247 1


CPL/61/8/1

BS EN 60336:2005

Medical electrical equipment. X-ray tube assemblies for medical diagnosis. Characteristics of focal spotssupersedes BS EN 60336:1995 which remains currentISBN 0 580 46478 4


CH/62/2

BS EN 60519:-Safety in electroheat installations

BS EN 60519-3:2005

Particular requirements for induction and conduction heating and induction melting installationssupersedes BS EN 60519-3:1996ISBN 0 580 46516 0


PEL/27

BS EN 60670:-

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations




PEL/23

BS EN 60836:2005

Specifications for unused silicone insulating liquids for electrotechnical purposessupersedes BS 7704:1993ISBN 0 580 46507 1


GEL/10

BS EN 60939:-

Passive filter units for electromagnetic interference suppression

BS EN 60939-1:2005Generic specification

supersedes BS EN 133000:1997 which remains currentISBN 0 580 46031 2


EPL/40X

BS EN 61019:-

Surface acoustic wave (SAW) resonators

BS EN 61019-2:2005Guide to the use



EPL/49

BS EN 61034:-

Measurement of smoke density of cables burning under defined conditions

BS EN 61034-2:2005Test procedure and requirements



GEL/20/18

BS EN 61185:2005

Ferrite cores (ETD-cores) intended for use in power supply applications. Dimensionssupersedes BS EN 61185:1997ISBN 0 580 46440 7


EPL/51

BS EN 61215:2005

Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approvalsupersedes BS EN 61215:1995ISBN 0 580 46286 4


GEL/82

BS EN 61249:-

Materials for printed boards and other interconnecting structures

BS EN 61249-2:-

Reinforced base materials, clad and unclad

BS EN 61249-2-26:2005

Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-cladno current standard is supersededISBN 0 580 45926 8


EPL/501

BS EN 61280:-

Fibre optic communication subsystem test procedures

BS EN 61280-2:-Digital systems

BS EN 61280-2-2:2005

Optical eye pattern, waveform and extinction ratio measurementsupersedes BS EN 61280-2-2:1999ISBN 0 580 46672 8


GEL/86/3

BS EN 61300:-

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures

BS EN 61300-3:-Examinations and measurements

BS EN 61300-3-37:2005

Endface angle of angle- polished optical fibresno current standard is supersededISBN 0 580 46673 6


GEL/86/2


BS EN 61442:2005

Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)partially supersedes BS 7888-2:1998ISBN 0 580 46194 7


GEL/20/11

BS EN 61499:-Function blocks

BS EN 61499-2:2005Software tools requirements



GEL/65

BS EN 61850:-

Communication networks and systems in substations

BS EN 61850-10:2005Conformance testing



PEL/57

BS EN 61960:2004

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applicationssupersedes BS EN 61960-1:2001 and BS EN 61960-2:2002 which remain currentISBN 0 580 46525 X


PEL/21/1

BS EN 62093:2005

Balance-of-system components for photovoltaic systems. Design qualification natural environmentsno current standard is supersededISBN 0 580 46138 6


GEL/82

BS EN 62150:-

Fibre optic active components and devices. Test and measurement procedures

BS EN 62150-1:2005General and guidance



GEL/86/3

BS EN 62258:-Semiconductor die products

BS EN 62258-2:2005Exchange data formats

supersedes PD ES 59008-6-1:1999ISBN 0 580 46504 7


EPL/47

BS EN 62271:-

High-voltage switchgear and controlgear

BS EN 62271-200:2004

AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kVsupersedes BS EN 60298:1996 which remains currentISBN 0 580 46169 6


PEL/17/1

BS EN 62298:-Teleweb application

BS EN 62298-1:2005General description



EPL/100

BS EN 62298-2:2005Delivery methods



EPL/100

BS EN 62298-3:2005Superteletext profile



EPL/100

BS EN 62323:2005

Dimensions of half pot-cores made of ferrite for inductive proximity switchesno current standard is supersededISBN 0 580 464415


EPL/51

BS EN 88528:-

Reciprocating internal combustion engine driven alternating current generating sets

BS EN 88528-11:2004

Rotary uninterruptible power systems. Performance requirements and test methodsno current standard is supersededISBN 0 580 46509 8


PEL/2

BS IMPLEMENTATIONS

BS ISO 37:2005

Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain propertiessupersedes BS 903-A2:1995ISBN 0 580 46593 4


PRI/22

BS ISO 1924:-

Paper and board. Determination of tensile properties

BS ISO 1924-3:2005

Constant rate of elongation method (100 mm/min)no current standard is supersededISBN 0 580 46553 5


PAI/11

BS ISO 3761:2005

Oil of rosewood, Brazilian type [Aniba rosaeodora Ducke var. amazonica Ducke or Aniba parviflora (Meissner) Mez]no current standard is supersededISBN 0 580 46681 7


AW/54

of 75BS IMPLEMENTATIONS

BS ISO 5834:-

Implants for surgery. Ultra-high molecular weight polyethylene

BS ISO 5834-4:2005

Oxidation index measurement methodno current standard is supersededISBN 0 580 46381 8


CH/150/1

BS ISO 6588:-

Paper, board and pulps. Determination of pH of aqueous extracts

BS ISO 6588-2:2005Hot extraction

partially supersedes BS 2924-1:1983ISBN 0 580 46551 9


PAI/11

BS ISO 7372:2005

Trade data interchange. Trade data elements directoryno current standard is supersededISBN 0 580 46283 8


IDT/2/20

BS ISO 7967:-

Reciprocating internal combustion engines. Vocabulary of components and systems

BS ISO 7967-6:2005Lubricating systems

supersedes BS 7016-6:1992ISBN 0 580 46529 2


MCE/14/-/5

BS ISO 8199:2005

Water quality. General guidance on the enumeration of micro-organisms by culturesupersedes BS 6068-4.2:1989ISBN 0 580 46724 4


EH/3/4

BS ISO 8784:-

Pulp, paper and board. Microbiological examination

BS ISO 8784-1:2005

Total count of bacteria, yeast and mould based on disintegrationno current standard is supersededISBN 0 580 46552 7


PAI/11

BS ISO 8858:-Hard coal. Froth flotation testing

BS ISO 8858-3:2004Release evaluation



PTI/16

BS ISO/IEC 9798:-

Information technology. Security techniques. Entity authentication

BS ISO/IEC 9798-6:2005

Mechanisms using manual data transferno current standard is supersededISBN 0 580 46671 X


IST/33

BS ISO 9825:2005

Hydrometry. Field measurement of discharge in large rivers and rivers in floodno current standard is supersededISBN 0 580 46572 1


CPI/113/1

BS ISO 10071:-

Tools for pressing. Ball-lock punches

BS ISO 10071-2:2005Ball-lock punches for heavy duty



MTE/12

BS ISO 10245:-

Cranes. Limiting and indicating devices

BS ISO 10245-4:2004Jib cranes



MHE/3

BS ISO 11556:2005

Paper and board. Determination of curl using a single vertically suspended test piecesupersedes BS ISO 11556:1998ISBN 0 580 46443 1


PAI/11

BS ISO 14428:2004

Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during bakingno current standard is supersededISBN 0 580 46670 1


CII/24

BS ISO 14837:-

Mechanical vibration. Ground-borne noise and vibration arising from rail systems

BS ISO 14837-1:2005General guidance



GME/21/3

BS ISO 15031:-

Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics

BS ISO 15031-4:2005External test equipment



AUE/16


BS ISO 15740:2005

Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devicesno current standard is supersededISBN 0 580 46685 X


CPW/42

BS ISO 16121:-

Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses

BS ISO 16121-4:2005Cabin environment



AUE/12

BS ISO 16152:2005

Plastics. Determination of xylene-soluble matter in polypropyleneno current standard is supersededISBN 0 580 46568 3


PRI/82

BS ISO 16468:2005

Investment castings (steel, nickel alloys and cobalt alloys). General technical requirementsno current standard is supersededISBN 0 580 46668 X


ISE/6

BS ISO 17432:2004

Health informatics. Messages and communication. Web access to DICOM persistent objectsno current standard is supersededISBN 0 580 46653 1


IST/35

BS ISO 18164:2005

Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistanceno current standard is supersededISBN 0 580 46634 5


AUE/4

BS ISO 19123:2005

Geographic information. Schema for coverage geometry and functionsno current standard is supersededISBN 0 580 46706 6


IST/36

BS ISO/IEC 19794:-

Information technology. Biometric data interchange formats

BS ISO/IEC 19794-2:2005Finger minutiae data



IST/44

BS ISO 20859:2005

Cinematography. Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm filmno current standard is supersededISBN 0 580 46649 3


CPW/36

BS ISO 21537:-

Clamping flanges for superabrasive cutting-off wheels. Natural stone

BS ISO 21537-1:2004Natural stone



MTE/13

BS ISO 21537-2:2004Building and construction



MTE/13

BS ISO 22641:2005

Space data and information transfer systems. TM (telemetry) synchronization and channel codingno current standard is supersededISBN 0 580 46601 9


ACE/68/-/7

BS ISO 22642:2005

Space data and information systems. TC (telecommand) synchronisation and channel codingno current standard is supersededISBN 0 580 46602 7


ACE/68/-/7

BS ISO 22646:2005

Space data and information transfer systems. Space packet protocolno current standard is supersededISBN 0 580 46603 5


ACE/68/-/7

BS ISO 22666:2005

Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocolno current standard is supersededISBN 0 580 46607 8


ACE/68

BS ISO 22667:2005

Space data and information transfer systems. Communications operations procedure-1no current standard is supersededISBN 0 580 46606 X


ACE/68/-/7

BS ISO 23603:2005

Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colourno current standard is supersededISBN 0 580 46642 6


CPL/34


BS ISO 23713:2005

Pulps. Determination of fibre coarseness by automated optical analysis. Polarized light methodno current standard is supersededISBN 0 580 464334


PAI/11

BS ISO/IEC 25000:2005

Software engineering. Software product quality requirements and evaluation (SQuaRE). Guide to SQuaREno current standard is supersededISBN 0 580 46344 3


IST/15

BS ISO/IEC 27001:2005

Information technology. Security techniques. Information security management systems. Requirementssupersedes BS 7799-2:2002ISBN 0 580 46781 3


IST/33Also available as part of KIT 20.

PUBLISHED DOCUMENTS

PD ISO/TR 22971:2005

Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility resultsno current standard is supersededISBN 0 580 46168 8


SS/6

PD ISO/IEC Guide 53:2005

Conformity assessment. Guidance on the use of an organization's quality management system in product certificationno current standard is supersededISBN 0 580 46532 2


QS/3

PD IEC/TR 62095:2003

Electric cables. Calculation of current rating. Cable current rating calculations using finite element methodno current standard is supersededISBN 0 580 45929 2


GEL/20/16

DRAFTS FOR DEVELOPMENTDD 8464:2005

Estate agency services. Residential property sales. Specification for the provision of the serviceno current standard is supersededISBN 0 580 46826 7


SVS/0

DD CEN/TS 12983:-

Cookware. Domestic cookware for use on top of a stove, cooker or hob

DD CEN/TS 12983-2:2005

Further general requirements and specific requirements for ceramic, glass and glass ceramic cookwareno current standard is supersededISBN 0 580 46059 2


CW/9

DD CEN/TS 13130:-

Materials and articles in contact with foodstuffs. Plastics substances subject to limitation

DD CEN/TS 13130-9:2005

Determination of acetic acid, vinyl ester in food simulantsno current standard is supersededISBN 0 580 46074 6


CW/47/1

DD CEN/TS 14966:2005

Wood-based panels. Small scale indicative test methods for certain mechanical propertiesno current standard is supersededISBN 0 580 46271 4


B/541

DD CEN ISO/TS 17261:2005

Intelligent transport systems. Automatic vehicle and equipment identification. Intermodal goods transport architecture and terminologyno current standard is supersededISBN 0 580 46265 X


EPL/278

DD CLC/TS 61970:-

Energy management system application program interface (EMS-API)

DD CLC/TS 61970-2:2005Glossary



PEL/57

IT AND INFORMATION MANAGEMENT PUBLICATIONS AND PRODUCTSBIP 0023:2005Proteus compliance consultant

no current standard is superseded

£6,000.00 members£6,000.00 non-membersSpecial offer. Includes BS ISO/IEC 17799 and BS 7799-2. Available on a 1-year basis, or for 3-month period at a special price of £600.

BIP 0024:2005Proteus compliance evaluation

no current standard is superseded

£0.00 members£0.00 non-members30-day free trial month.

BIP 0071:2005

Information security management systems (ISMS) certification. Guidelines on requirements and preparation for certification based on ISO/IEC 27001:2005 (BS 7799-2:2005)supersedes PD 3001:2002ISBN 0 580 46002 9


ELECTRONIC PRODUCTS

of 75ELECTRONIC PRODUCTS

BIP 3044:2005

BS 8300 Design of buildings and their approaches to meet the needs of disabled people. Code of practicesupersedes EP 230ISBN 0 580 46869 0

£115.00 members£230.00 non-membersVAT is applicable to this item. Please note also that BIP 3043 constitutes a pack of five of this publication at a special price of £99 for registered charities and disability groups only.

BIP 3058:2005

The power of process auditing - DVD & CDno current standard is superseded

£395.00 members£395.00 non-membersVAT is applicable to this item.

KITS, SETS, PACKS AND SERIESKIT 20Information security standards kit



IST/33Special offer. Includes BS ISO/IEC 17799 and BS ISO/IEC 27001.

KIT 180

Asphalt/macadam for roads and other paved areasno current standard is superseded

£80.00 members£160.00 non-membersSpecial offer. Includes BS 594-1 and BS 4987-1.

AMENDMENTS TO BRITISH STANDARDSBS 594:-

Hot rolled asphalt for roads and other paved areas

BS 594-1:2005

Specification for constituent materials and asphalt mixturesCORRIGENDUM 1 AMD 16021

B/510/1

BS 4987:-

Coated macadam (asphalt concrete) for roads and other paved areas

BS 4987-1:2005

Specification for constituent materials and for mixturesCORRIGENDUM 1 AMD 16020

B/510

BS 5489:-

Code of practice for the design of road lighting

BS 5489-2:2003Lighting of tunnels

CORRIGENDUM 1 AMD 16009CPL/34/8

BS 5546:2000

Specification for installation of hot water supplies for domestic purposes, using gas-fired appliances of rated input not exceeding 70 kWAMENDMENT 1 AMD 14907

GSE/30

BS 6658:1985

Specification for protective helmets for vehicle usersAMENDMENT 2 AMD 15925

PH/6Also incorporates Amendment 1.

BS 6744:2001

Stainless steel bars for the reinforcement of and use in concrete. Requirements and test methodsAMENDMENT 1 AMD 15760

ISE/9/1

BS 6798:2000

Specification for installation of gas-fired boilers of rated input not exceeding 70 kW netAMENDMENT 1 AMD 14908

GSE/30/-/5

BS 7895:1997

Specification for bayonet lampholders with enhanced safetyAMENDMENT 2 AMD 15970

CPL/34/2Also incorporates Amendment 1.

BS 8300:2001

Design of buildings and their approaches to meet the needs of disabled people. Code of practiceCORRIGENDUM 1 AMD 15982

B/209/8Also incorporates Amendment 1.

BS N 100:-

Aircraft oxygen systems and equipment

BS 4N 100-1:1999Design and installation

AMENDMENT 1 AMD 15951ACE/38

BS 4N 100-2:1999

Tests for the compatibility of materials in the presence of oxygenAMENDMENT 2 AMD 15357Also incorporates Amendment 1.

UPDATED BRITISH STANDARDSBS 2982:1992

Specification for materials and packaging of surgical scalpels with detachable bladesAMENDMENT 2


CH/170Also incorporates Amendment 1.

BS S 162:1990

Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vacuum melted)AMENDMENT 2


ACE/61/-/15Also incorporates Amendment 1.

SPECIAL ANNOUNCEMENTS

DD IEC TS 60695:-Fire hazard testing

DD IEC TS 60695-6:-Smoke obscuration

DD IEC TS 60695-6-2:2005

Summary and relevance of test methods

This document, which will be available shortly, implements verbatim IEC TS 60695-6-2:2005.Contact: Asghar AshrafiEmail: [email protected]

GEL/89

of 75SPECIAL ANNOUNCEMENTS

EN 13365:2002/prA1

Transportable gas cylinders. Cylinder bundles for permanent and liquefied gases (excluding acetylene). Inspection at time of filling

This revision will shortly be made available in the UK as an amendment to BS EN 13365:2002.Contact: Sarah HorsfieldEmail: [email protected]

PVE/3/7

EN 14513

Transportable gas cylinders. Bursting disc pressure relief devices (excluding acetylene gas cylinders)

This standard has been approved at Final Vote and is expected to be published in the UK in early 2006.Contact: Sarah HorsfieldEmail: [email protected]

PVE/3/7

BRITISH STANDARDS PROPOSED FOR CONFIRMATIONBS 648:1964

Schedule of weights of building materials

B/525/1

BS 1117:-

Specification for bare fine resistance wire for precision electrical equipment

BS 1117-2:1964Metric units

GEL/55

BS 1179:1967

Glossary of terms used in the gas industry

GSE/2

BS 1179:-

Glossary of terms used in the gas industry

BS 1179-6:1980

Combustion and utilization including installation at consumers' premises

GSE/2

BS 2977:1958

Domestic lighting appliances for use with liquefied petroleum gases

GSE/24

BS 3466:1962

Methods of test for resistance per unit length of metallic electrical resistance material

GEL/55

BS 3467:1962

Method of test for temperature coefficient of resistance of alloy wire for precision resistors

GEL/55

BS 4320:1968

Specification for metal washers for general engineering purposes. Metric series

FME/9

BS 4882:1990

Specification for bolting for flanges and pressure containing purposes

FME/9

BS 5809:1980

Specification for safety and efficiency of the gas heating equipment of commercial dishwashing machines

GSE/19

BS 6200:-

Sampling and analysis of iron, steel and other ferrous metals

BS 6200-3:-Methods of analysis

BS 6200-3.32:-Determination of titanium

BS 6200-3.32.1:-

Diantipyrylmethane spectrophotometric methodSee BS EN ISO 10280.

BS 7164:-

Chemical tests for raw and vulcanized rubber

BS 7164-26:-

Methods for determination of manganese content

BS 7164-26.2:-

Sodium periodate photometric methodsSee BS ISO 7780.

BS 7407:1991

Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children

CW/15

BS 7478:1991

Guide to selection and use of thermostatic radiator valves

RHE/16

BS EN 10036:1991

Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen

ISE/18

BS EN 10071:1991

Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method

ISE/18

BS EN 10136:1991

Chemical analysis of ferrous materials. Determination of nickel in steels and irons. Flame atomic absorption spectrometric method

ISE/18

BS EN 10211:1996

Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method

ISE/18

BS EN 10212:1996

Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method

ISE/18

BS EN 10276:-

Chemical analysis of ferrous materials. Determination of oxygen in steel and iron

BS EN 10276-1:2000

Sampling and preparation of steel samples for oxygen determination

ISE/18

of 75BRITISH STANDARDS PROPOSED FOR CONFIRMATION

BS EN ISO 10280:1995(BS 6200-3.32.1:1991)

Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric method

ISE/18

BS EN ISO 10700:1995

Steel and iron. Determination of manganese content. Flame atomic absorption spectrometric method

ISE/18

BS EN 24937:1991

Steel and iron. Determination of chromium content. Potentiometric or visual titration method

ISE/18

BS ISO 7780:1998(BS 7164-26.2:1998)

Rubber and rubber latices. Determination of manganese content. Sodium periodate photometric methods

PRI/23

BS ISO 14558:2000

Rubber. Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy

PRI/23

BS ISO 15671:2000

Rubber and rubber additives. Determination of total sulfur content using an automatic analyser

PRI/50

BS ISO 15672:2000

Rubber and rubber additives. Determination of total nitrogen content using an automatic analyser

PRI/23

BRITISH STANDARDS REVIEWED AND CONFIRMEDBS 1765:-

Specification for hospital bedside lockers

BS 1765-2:1976

General purpose lockers of wooden construction with facilities for hanging day clothes

CH/101

BS 1823:1973

Specification for stainless steel hollow-ware for use in hospital operating-theatres and wards

CH/101

BS 2588:-

Portable sanitary pans for use in healthcare establishments

BS 2588-1:1992Specification for reusable bed pans

CH/101

BS 2588-2:1992

Specification for reusable pans for commode chairs

CH/101

BS 2606:1955

Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak

CH/62/2

BS 3041:-Radio-frequency connectors

BS 3041-2:1977

Specification for coaxial unmatched connector

EPL/46

BS 3041-7:1996

R.F. coaxial connectors with inner diameter of output conductor 9,5 mm (0,374 in) with bayonet lock. Characteristic impedance 50 ohms (Type C)

EPL/46/2

BS 3041-12:1981

Specification for R.F. coaxial connectors with screw coupling, unmatched (type UHF)

EPL/46

BS 3215:1995

Specification for reusable portable urinals

CH/101

BS 3221:-Medicine measures

BS 3221-1:1985

Specification for medicine measures of 50 ml total graduated capacity

CH/101

BS 3221-6:1987

Specification for free-standing plastics medicine measuring spoons of 5 ml capacity

CH/101

BS 3221-7:1995

Specification for oral syringes delivering doses up to and including 5 ml

CH/101

BS 3539:1986

Specification for sound level meters for the measurement of noise emitted by motor vehicles

EPL/29

BS 3783:1964

Specification for X-ray lead-rubber protective aprons for personal use

CH/62/2

BS 4031:1966

Specification for X-ray protective lead glasses

CH/62/2

BS 4285:-

Microbiological examination for dairy purposes

BS 4285-2:-

Methods of general application for enumeration of microorganisms

BS 4285-2.5:1989

Enumeration of bacteria by direct microscopic counts

AW/9

BS 4285-3:-

Methods for detection and/or enumeration of specific groups of microorganisms

BS 4285-3.2:1991

Enumeration of thermoduric bacteria

AW/9

BS 4285-3.4:-

Enumeration of lipolytic microorganisms

BS 4285-3.4.2:1989Tributyrin agar method

AW/9

BS 4285-3.5:1988

Enumeration of proteolytic microorganisms

AW/9

of 75BRITISH STANDARDS REVIEWED AND CONFIRMED

BS 4285-3.6:1986Enumeration of yeasts and moulds

AW/9

BS 4285-3.7:1987Enumeration of coliform bacteria

AW/9

BS 4285-3.9:-Detection of Salmonella

BS 4285-3.9.2:1992

Screening method using electrical conductance

AW/9

BS 4285-3.11:1985

Detection and enumeration of faecal streptococci

AW/9

BS 4285-5:-Ancillary methods

BS 4285-5.3:1987Test for inhibitory substances

AW/9

BS 4301:1991

Recommendations for preparation of drawings for optical elements and systems

CPW/172

BS 4430:-

Recommendations for the safety of powered industrial trucks

BS 4430-2:1969Operation and maintenance

MHE/7

BS 4563:-

Cinematography. Television usage. Recommendations for the density range, contrast and colour balance of films and slides for colour televisionSee BS 5550-6.4.

BS 4779:1971

Recommendations for measurement of the optical transfer function of optical devices

CPW/172

BS 4793:1972

Recommendations for specifying the optical performance of lenses for television cameras

CPW/172

BS 4995:1973

Recommendations for measurement of the veiling glare index of lenses and optical systems

CPW/172

BS 4997:1991

Specification for wooden axilla crutches

CH/173

BS 5109:1974

Glossary of terms used in assessing the performance of optical devices and systems

CPW/172

BS 5181:1975

Specification for wooden walking sticks

CH/173

BS 5205:1990

Specification for adjustable metal walking sticks

CH/173

BS 5402:1976Specification for patient trolleys

CH/101

BS 5452:1977

Specification for hospital hollow-ware made of plastics material

CH/101

BS 5549:1978

Specification for modular plug-in unit and standard 19-inch rack mounting unit based on NIM standard (for electronic nuclear instruments)

NCE/8

BS 5550:-Cinematography

BS 5550-5:-

Common to more than one film gauge

BS 5550-5.4:-Sound

BS 5550-5.4.1:1986

Code of practice for the identification of systems for synchronization of unperforated audio tape with motion-picture film and videotape

CPW/36

BS 5550-5.4.3:1987

Specification for positions and width dimensions of recording and reproducing head gaps for three-, four- or six-track magnetic sound records on 35 mm and single-track on 17.5 mm motion-picture film containing no picture

CPW/36

BS 5550-6:-Television usage

BS 5550-6.4:1980(BS 4563:1970)

Recommendations for the density range, contrast and colour balance of films and slides for colour television

CPW/36

BS 5554:1978

Guide to a modular instrumentation system for data handling. CAMAC system

NCE/8

BS 5724:-Medical electrical equipment

BS 5724-2:-Particular requirements for safety

BS 5724-2.15:1989

Specification for capacitor discharge X-ray generators

CH/62/2

BS 5724-3:-

Particular requirements for performance

BS 5724-3.26:1990

Method for declaring parameters for ultrasonic diagnostic equipment using test objects

CH/62/2

BS 5763:-

Methods for microbiological examination of food and animal feeding stuffs


BS 5763-5:1981

Enumeration of micro-organisms. Colony count at 30$0DC (surface plate technique)

AW/9

BS 5763-13:1998

Enumeration of Escherichia coli. Colony-count technique at 44$0DC using membranes

AW/9

BS 5836:1980

Guide to CAMAC. Organization of multi-crate systems. Specification of the Branch-highway and CAMAC crate controller type A1

NCE/8

BS 5915:1980

Specification for equipment for minehead assay and sorting radioactive ores in containers

NCE/2

BS 6058:1989

Method of specifying and verifying the characteristics of rotating anode X-ray tubes and X-ray tube assemblies used in medical diagnosis

CH/62/2

BS 6156:1981

Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single

EPL/46

BS 6537:1984

Specification for staple type connectors for hydraulic fluid power applications

MCE/18

BS 6628:1985

Method for determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis

CH/62/2

BS 6935:-Wheelchair tests

BS 6935-5:1988

Methods for determination of overall dimensions, mass and turning space

CH/173/1

BS 7011:-

Consumable accessories for light microscopes

BS 7011-2:-Slides

BS 7011-2.2:1998

Specification for materials and quality of finish

CPW/172/5

BS 7011-3:-Cover glasses

BS 7011-3.2:1998

Specification for materials and quality of finish

CPW/172/5

BS 7012:-Light microscopes

BS 7012-1:1998

Specification for the magnifying power of microscope imaging components

CPW/172/5

BS 7012-4:-

Specification for microscope objective and nosepiece screw threads

BS 7012-4.1:1998

Screw thread type RMS (4/5 in x 1/36 in)

CPW/172/5

BS 7012-6:1998Specification for spectral filters

CPW/172/5

BS 7012-10:-

Minimum requirements for stereo microscopes

BS 7012-10.4:1998Information provided to the user

CPW/172/5

BS 7012-11:1998Information provided to the user

CPW/172/5

BS 7088:1989

Specification for pneumatic tourniquet equipment

CH/101

BS 7313:-Prosthetics and orthotics

BS 7313-2:1990

Method of describing limb deficiencies present at birth

CH/168

BS 7313-3:1993

Method of describing lower limb amputation stumps

CH/168

BS 7313-4:1993

Method of describing upper limb amputation stumps

CH/168

BS 7516:1995

Nuclear instrumentation. Liquid-scintillation counting systems. Performance verification

NCE/8

BS 7580:-

Specification for the verification of sound level meters

BS 7580-1:1997Comprehensive procedure

EPL/29

BS 7580-2:1997

Shortened procedure for type 2 sound level meters

EPL/29

BS 7725:-

Evaluation and routine testing in medical imaging departments

BS 7725-1:1994General

CH/62/2

BS 7725-2:-Constancy tests

BS 7725-2.1:1994Method for film processors

CH/62/2

BS 7725-2.2:1994

Method for radiographic cassettes and film changers and film-screen contact and relative sensitivity of the screen-cassette assembly

CH/62/2

BS 7725-2.3:1994

Method for darkroom safelight conditions

CH/62/2


BS 7847:1996

Fluid power systems and components. Connectors and associated components. Nominal pressures

MCE/18

BS 9220:1971

Specification for rigid waveguide tubing of assessed quality: generic data and methods of test

EPL/46

BS EN 1012:-

Compressors and vacuum pumps. Safety requirements

BS EN 1012-1:1997Compressors

MCE/8

BS EN 1012-2:1997Vacuum pumps

MCE/8

BS EN 1175:-

Safety of industrial trucks. Electrical requirements

BS EN 1175-1:1998

General requirements for battery powered trucks

MHE/7

BS EN 1175-2:1998

General requirements for internal combustion engine powered trucks

MHE/7

BS EN 1175-3:1998

Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

MHE/7

BS EN 1459:1999

Safety of industrial trucks. Self-propelled variable reach trucks

MHE/7

BS EN 1525:1998

Safety of industrial trucks. Driverless trucks and their systems

MHE/7

BS EN 1526:1998

Safety of industrial trucks. Additional requirements for automated functions on trucks

MHE/7

BS EN 1726:-

Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N


MHE/7

BS EN ISO 6708:1996

Pipework components. Definition and selection of DN (nominal size)

PSE/15

BS EN ISO 10882:-

Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone

BS EN ISO 10882-1:2001Sampling of airborne particles

WEE/40

BS EN ISO 10882-2:2000Sampling of gases

WEE/40

BS EN ISO 11151:-

Lasers and laser-related equipment. Standard optical components

BS EN ISO 11151-1:2000

Components for the UV, visible and near-infrared spectral ranges

CPW/172

BS EN ISO 11151-2:2000

Components for the infrared spectral range

CPW/172

BS EN ISO 11254:-

Lasers and laser-related equipment. Determination of laser-induced damage threshold of optical surfaces

BS EN ISO 11254-1:20001-on-1 test

CPW/172

BS EN 12526:1999

Castors and wheels. Vocabulary, recommended symbols and multilingual dictionary

MHE/7

BS EN 12527:1999

Castors and wheels. Test methods and apparatus

MHE/7

BS EN 12528:1999

Castors and wheels. Castors for furniture. Requirements

MHE/7

BS EN 12529:1999

Castors and wheels. Castors for furniture. Castors for swivel chairs. Requirements

MHE/7

BS EN 12530:1999

Castors and wheels. Castors and wheels for manually propelled institutional applications

MHE/7

BS EN 12531:1999

Castors and wheels. Hospital bed castors

MHE/7

BS EN 12532:1999

Castors and wheels. Castors and wheels for applications up to 1,1 m/s (4 km/h)

MHE/7

BS EN 12533:1999

Castors and wheels. Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)

MHE/7

BS EN 12549:1999

Acoustics. Noise test code for fastener driving tools. Engineering method

MCE/8

BS EN ISO 13694:2001

Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution

CPW/172

BS EN 28662:-

Hand-held portable power tools. Measurement of vibrations at the handle

BS EN 28662-1:1993General

MCE/8


BS EN 60169:-Radio-frequency connectors

BS EN 60169-21:1997

Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (types SC-A and SC-B)

EPL/46/2

BS EN 61169:-Radio-frequency connectors

BS EN 61169-1-1:1997

Single, multi-series, dual-language blank detail specification

EPL/46/2

BS EN 61169-33:1997

Sectional specification for series BMA R.F. connectors

EPL/46/2

BS EN 61169-36:1997

Microminiature R.F. coaxial connectors with snap-on coupling. Characteristic impedance 50 ohms (type MCX)

EPL/46/2

BS EN 61196:-

Radio-frequency cables. Specifications

BS EN 61196-3:1999

Sectional specification for coaxial cables for local area networks

EPL/46

BS EN 61196-3:-

Coaxial cables for digital communication in horizontal floor wiring

BS EN 61196-3-2:1998

Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s

EPL/46/1

BS EN 61196-3-3:1998

Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s

EPL/46/1

BS EN 61580:-

Methods of measurement for waveguides

BS EN 61580-3:1997Variation of group delay

EPL/46/2

BS EN 61580-6:1997

Return loss on waveguide and waveguide assemblies

EPL/46/2

BS EN 122001:1995

Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency connectors (type MIL-C-39012)

EPL/46

BS EN 122002:1995

Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connectors

EPL/46

BS EN 122003:1995

Specification for harmonized system of quality assessment for electronic components. Blank detail specification for the preparation of customer detail specifications (CDS) and detail specifications for standard production items with capability approval

EPL/46

BS EN 122120:1996(BS CECC 22120:1993)

Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series BNC

EPL/46

BS EN 122130:1994

Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMB

EPL/46

BS EN 122200:1995

Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series TNC

EPL/46/2

BS ISO 29:1980

Cinematography. Projector usage of 8 mm Type R silent motion-picture film for direct front projection. Specifications

CPW/36

BS ISO 54:1996

Cylindrical gears for general engineering and for heavy engineering. Modules

MCE/5

BS ISO 69:1998

Cinematography. 16 mm motion-picture magnetic film. Cutting and perforating dimensions

CPW/36

BS ISO 516:1999

Photography. Camera shutters. Timing

CPW/42

BS ISO 701:1998

International gear notation. Symbols for geometrical data

MCE/5

BS ISO 732:2000

Photography. 120-size and 220-size films. Dimensions

CPW/42

BS ISO 897:2000

Photography. Roll films, 126, 110 and 135- size films. Identification of the image-bearing side

CPW/42

BS ISO 1007:2000

Photography. 135-size film and magazine. Specifications

CPW/42

BS ISO 1009:2000

Photography. Paper dimensions. Rolls for printers

CPW/42

BS ISO 1039:1995

Cinematography. Cores for motion-picture and magnetic film rolls. Dimensions

CPW/36

BS ISO 1122:-Vocabulary of gear terms

BS ISO 1122-1:1998Definitions related to geometry

MCE/5


BS ISO 1217:1996

Displacement compressors. Acceptance tests

MCE/8

BS ISO 1754:1998

Photography. Cameras using 35 mm film and roll film. Picture sizes

CPW/42

BS ISO 2328:1993

Fork lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions

MHE/7

BS ISO 3023:1995

Cinematography. 65 mm and 70 mm unexposed motion-picture film. Cutting and perforating dimensions

CPW/36

BS ISO 3629:2000

Photography. Processing chemicals. Specifications for potassium metabisulfite

CPW/42

BS ISO 3664:2000

Viewing conditions for graphic technology and photography

CPW/42

BS ISO 3764:2000

Timekeeping instruments. Movements. Forms, dimensions and nomenclature

STI/53

BS ISO 3772:2000

Photography. Rolls of sensitized material for the pre-press industry. Dimensions and related requirements

CPW/42

BS ISO 3775:1990

Cinematography. Printed 8 mm Type S image area on 16 mm motion-picture film perforated 8 mm Type S (1-3). Position and dimensions

CPW/36

BS ISO 4834:1997

Cinematography. Magnetic sound test films excluding striped release prints. Basic technical characteristics

CPW/36

BS ISO 5466:1996

Photography. Processed safety photographic films. Storage practices

CPW/42

BS ISO 5655:2000

Photography. Industrial radiographic films (roll and sheet) and metal intensifying screens. Dimensions

CPW/42

BS ISO 5768:1998

Cinematography. Image produced by camera aperture type W on 16 mm motion-picture film. Position and dimensions

CPW/36

BS ISO 5990:2000

Photography. Processing chemicals. Specifications for potassium sulfite, 650 g/l solution

CPW/42

BS ISO 6025:2000

Cinematography. Analogue photographic sound test films, 35 mm and 16mm. Specifications

CPW/36

BS ISO 6292:1996

Powered industrial trucks and tractors. Brake performance and component strength

MHE/7

BS ISO 6328:2000

Photography. Photographic materials. Determination of ISO resolving power

CPW/42

BS ISO 6336:-

Calculation of load capacity of spur and helical gears

BS ISO 6336-1:1996

Basic principles, introduction and general influence factors

MCE/5

BS ISO 6336-2:1996

Calculation of surface durability (pitting)

MCE/5

BS ISO 6336-3:1996

Calculation of tooth bending strength

MCE/5

BS ISO 7176:-Wheelchairs

BS ISO 7176-1:1999Determination of static stability

CH/173/1

BS ISO 7176-4:1997

Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range

CH/173/1

BS ISO 7176-8:1998

Requirements and test methods for static, impact and fatigue strengths

CH/173/1

BS ISO 7176-14:1997

Power and control systems for electric wheelchairs. Requirements and test methods

CH/173/1

BS ISO 7176-15:1996

Requirements for information disclosure, documentation and labelling

CH/173/1

BS ISO 7176-16:1997

Resistance to ignition of upholstered parts. Requirements and test methods

CH/173/1

BS ISO 7176-22:2000Set-up procedures

CH/173/1

BS ISO 7241:-

Hydraulic fluid power. Quick-action couplings

BS ISO 7241-2:2000Test methods

MCE/18

BS ISO 8395:1995

Cinematography. Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes. Specifications

CPW/36

BS ISO 8548:-

Prosthetics and orthotics. Limb deficiencies


BS ISO 8548-4:1998

Description of causal conditions leading to amputation

CH/168

BS ISO 8573:-Compressed air for general use

BS ISO 8573-2:1996

Test methods for aerosol oil content

MCE/8

BS ISO 8573-3:1999

Test methods for measurement of humidity

MCE/8

BS ISO 8600:-

Optics and optical instruments. Medical endoscopes and endoscopic accessories

BS ISO 8600-4:1997

Determination of maximum width of insertion portion

CH/62/4

BS ISO 8622:1998

Cinematography. Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes. A-chain reproduction characteristics

CPW/36

BS ISO 9022:-

Optics and optical instruments. Environmental test methods

BS ISO 9022-3:1998Mechanical stress

CPW/172

BS ISO 9022-10:1998

Combined sinusoidal vibration and dry heat or cold

CPW/172

BS ISO 9022-13:1998

Combined shock, bump or free fall and dry heat or cold

CPW/172

BS ISO 9022-15:1998

Combined digitally controlled broad-band random vibration and dry heat or cold

CPW/172

BS ISO 9022-16:1998

Combined bounce or steady-state acceleration and dry heat or cold

CPW/172

BS ISO 9022-21:1998

Combined low pressure and ambient temperature or dry heat

CPW/172

BS ISO 9236:-

Photography. Sensitometry of screen/film systems for medical radiography

BS ISO 9236-3:1999

Determination of sensitometric curve shape, speed and average gradient for mammography

CPW/42

BS ISO TR 10064:-

Cylindrical gears. Code of inspection practice

BS ISO TR 10064-1:1992

Inspection of corresponding flanks of gear teeth

MCE/5

BS ISO TR 10064-2:1996

Inspection related to radial composite deviations, runout, tooth thickness and backlash

MCE/5

BS ISO TR 10064-3:1996

Recommendations relative to gear blanks, shaft centre distance and parallelism of axes

MCE/5

BS ISO TR 10064-4:1998

Recommendations relative to surface texture and tooth contact pattern checking

MCE/5

BS ISO 10110:-

Optics and optical instruments. Preparation of drawings for optical elements and systems

BS ISO 10110-8:1997Surface texture

CPW/172

BS ISO 10110-13:1997Laser irradiation damage threshold

CPW/172

BS ISO TR 10495:1997

Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336

MCE/5

BS ISO 11312:2000

Photography. Sheets of sensitized material for the pre-press industry. Dimensions and related requirements

CPW/42

BS ISO 11315:-

Photography. Projection in indoor rooms

BS ISO 11315-3:1999

Classification of transmitting projection screens and measurement of their transmitted luminance levels

CPW/42

BS ISO 11316:1999

Photography. Projection of still pictures. Measuring methods for the evaluation of imaging properties

CPW/42

BS ISO 11948:-Urine-absorbing aids

BS ISO 11948-1:1996Whole-product testing

CH/173/3

BS ISO 12222:2000

Cinematography. Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film. Specifications and dimensions

CPW/36

BS ISO 13405:-

Prosthetics and orthotics. Classification and description of prosthetic components

BS ISO 13405-1:1996

Classification of prosthetic components

CH/168

BS ISO 13405-2:1996

Description of lower-limb prosthetic components

CH/168


BS ISO 13405-3:1996

Description of upper-limb prosthetic components

CH/168

BS ISO 13628:-

Petroleum and natural gas industries. Design and operation of subsea production systems

BS ISO 13628-9:2000

Remotely operated tool (ROT) intervention systems

PSE/17

BS ISO 14524:1999

Photography. Electronic still-picture cameras. Methods for measuring opto-electronic conversion functions (OECFs)

CPW/42

BS ISO 14808:1997

Photography. Composition of 135-film canisters

CPW/42

BS ISO 15171:-

Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes

BS ISO 15171-2:2000

Coupling with M16 x 2 end for connection under pressure

MCE/18

BS ISO 15529:1999

Optics and optical instruments. Optical transfer function. Principles of measurement of modular transfer function (MTF) of sampled imaging systems

CPW/172

BS ISO 15544:2000

Petroleum and natural gas industries. Offshore production installations. Requirements and guidelines for emergency response

PSE/17

BS ISO 15621:1999

Urine-absorbing aids. General guidance on evaluation

CH/173/3

BS ISO 18904:2000

Imaging materials. Processed films. Method for determining lubrication

CPW/42

BS ISO 18906:2000

Imaging materials. Photographic films. Specifications for safety film

CPW/42

BS ISO 18907:2000

Imaging materials. Photographic films and papers. Wedge test for brittleness

CPW/42

BS ISO 18908:2000

Imaging materials. Photographic film. Determination of folding endurance

CPW/42

BS ISO 18910:2000

Imaging materials. Photographic film and paper. Determination of curl

CPW/42

BS ISO 18911:2000

Photography. Processed safety photographic films. Storage practices

CPW/42

BS ISO 18915:2000

Imaging materials. Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation

CPW/42

BS ISO 18917:1999

Photography. Determination of residual thiosulfate and other related chemicals in processed photographic materials. Methods using iodine-amylose, methylene blue and silver sulfide

CPW/42

BS ISO 18918:2000

Imaging materials. Processed photographic plates. Storage practices

CPW/42

BS ISO 18919:1999

Photography. Thermally processed silver microfilm. Specifications for stability

CPW/42

BS ISO 18920:2000

Imaging materials. Processed photographic reflection prints. Storage practices

CPW/42

BS ISO 18923:2000

Imaging materials. Polyester-base magnetic tape. Storage practices

CPW/42

BS ISO 18924:2000

Imaging materials. Test methods for Arrhenius type predictions

CPW/42

BS IEC 60313:2002

Coaxial connectors used in nuclear laboratory instrumentation

NCE/8

BS IEC 61336:1996

Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods

NCE/2

BS CECC 22000:1993

Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III)

EPL/46

BS CECC 22120:-

Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series BNCSee BS EN 122120.

BS CECC 299001:1999

Technology approval schedule. Manufacture of electrical connectors

EPL/46/2

PD 6573:1994

Fundamental aspects of safety standards for medical electrical equipment

CH/62/1

BS AU 40:-

Specification for motor vehicle lighting and signalling equipment

BS AU 40-4a:1966Sealed beam headlamps

AUE/1

BS AU 238:1991

Glossary of terms for road vehicle lighting and light signalling devices

AUE/1


BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCEBS 545:1982

Specification for bevel gears (machine cut)

MCE/5This standard has been proposed for confirmation of obsolescence for a further period as the national committee consider it to be out of date and incomplete in its reflection of the current state of the art.

BS 3810:-

Glossary of terms used in materials handling

BS 3810-2:1965

Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling)

MHE/7This standard has been proposed for confirmation of obsolescence for a further period as the national committee consider it to be out of date and incomplete in its reflection of the current state of the art.

BS 3810-3:1967

Terms used in connection with pneumatic and hydraulic handling


BS 3810-5:1971

Terms used in connection with lifting tackle


BS 3810-6:1973

Terms used in connection with pulley blocks


BS 3810-7:1973

Terms used in connection with aerial ropeways and cableways


BS 3810-8:1975

Terms used in connection with lifts, lifting platforms and inclined haulages


BS 3810-9:1975

Terms used in connection with rail transport


BRITISH STANDARDS DECLARED OBSOLESCENTBS 4285:-

Microbiological examination for dairy purposes

BS 4285-5:-Ancillary methods

BS 4285-5.2:1989

Methylene blue reduction test for cream and ice cream

AW/9This standard has been declared obsolescent as it is no longer relevant.

BS 6305:1982

Specification for general requirements for apparatus for connection to the British Telecommunications public switched telephone network

TCT/2This standard has been declared obsolescent as the national committees have concluded it is still used by industry.

BS 6312:1985

Specification for plugs for use with British Telecommunications line jack units


BS 6317:1992

Specification for simple telephones for connection to public switched telephone networks run by certain public telecommunications operators


BS 6320:1982

Specification for modems for connection to the British Telecommunications public switched telephone network


BS 6328:-

Apparatus for connection to private circuits run by certain public telecommunication operators

BS 6328-2:1985

Specification for apparatus for connection to baseband circuits


of 75BRITISH STANDARDS DECLARED OBSOLESCENT

BS 6328-3:1983

Specification for apparatus for connection to direct current circuits


BS 6328-4:1985

Specification for apparatus for connection to telegraph circuits using SCVF signalling


BS 6328-5:1984

Specification for apparatus for connection to wideband (FDM) circuits


BS 6403:1983

Specification for simple telex terminals using single channel voice frequency signalling for connection to British Telecommunications telex network


BS 6789:-

Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators

BS 6789-2:1984

Specification for apparatus with loudspeaking facilities


BS 6833:-

Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks

BS 6833-2:1992

Specification for cordless telephone apparatus using radio links


BS 6833-3:1992

Specification for the simple call routeing mode of cordless PBX operation with analogue interfaces to the PSTN and terminating stations treated as an entirety


BS 6833-5:1991

Specification for the cordless elements within PBX apparatus with analogue interfaces to the PSTN and terminating stations treated as an entirety


BS 7362:1990

Specification for telex terminal apparatus for connection to public telecommunications operators' telex networks


PD 6560:1992

A draft amendment to BS 6305:1992 "Specification for general requirements for apparatus for connection to public switched telephone networks run by certain public telecommunications operators"


PD 6561:1992

A draft amendment to BS 6789-1:1984 "Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Part 1. Specification for general requirements"


PD 6562:1992

A draft amendment to BS 6789-3.1:1985 'Apparatus with one or more particular functions for connection to the British Telecommunications public switched network. Part 3. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Section 3.1.


PD 6563:1992

A draft amendment to BS 6789-3.2:1987 'Apparatus with one or more particular functions for connection to certain public switched telephone networks. Part 3. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Section 3.2. Specificati


PD 6564:1992

A draft amendment to BS 6789-6.1:1986 'Apparatus with one or more particular functions for connection to certain public switched telephone networks. Part 6. Specification for series connected apparatus. Section 6.1. Apparatus having maximum allowable impa


of 75BRITISH STANDARDS DECLARED OBSOLESCENT

PD 6565:1992

A draft amendment to BS 6789-6.2:1989 'Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Part 6. Specification for series connected apparatus. Section 6


PD 6566:1992

A draft amendment to BS 6789-7:1988 'Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Part 7. Specification for apparatus with call barring facilities'


PD 6567:1992

A draft amendment to BS 6833-1:1987 'Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Part 1. Specification for general requirements'


PD 6571:1992

Text for BS 6789-2:1992 'Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunication operators. Part 2. Specification for apparatus with loudspeaking facilities'


PD 6572:1992

Text for BS 6833:Part 6:1992 'Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Part 6. Specification for cordless portable parts and cordless fixed parts


BRITISH STANDARDS PROPOSED FOR WITHDRAWALBS 1191:-

Specification for gypsum building plasters

BS 1191-1:1973

Excluding premixed lightweight plasters

B/544This standard has been proposed for withdrawal as it is superseded by BS EN 13279-1:2004 and BS EN 13279-2:2005. This standard will be withdrawn as soon as the relevant amendment to the National Forewords has been published

BS 1191-2:1973Premixed lightweight plasters

B/544This standard has been proposed for withdrawal as it is superseded by BS EN 13279-1:2004 and BS EN 13279-2:2005. This standard will be withdrawn as soon as the relevant amendment to the National Forewords has been published

BS 2000:-

Methods of test for petroleum and its products

BS 2000-135:1993

Determination of rust-preventing characteristics of steam-turbine oil in the presence of water

PTI/13This standard has been proposed for withdrawal as it is no longer used within the industry

BS 2000-146:2000

Determination of foaming characteristics of lubricating oils

PTI/13This standard has been proposed for withdrawal as it is no longer used within the industry

PD 6529:1990

Report on a new approach for design loads for buildings

B/525/1This standard has been proposed for withdrawal as it is seen to be out of date

BRITISH STANDARDS WITHDRAWNBS 235:1987

Specification for gears for electric traction

MCE/5This standard has been withdrawn as it is no longer felt to be relevant

BS 436:-Spur and helical gears

BS 436-1:1967

Basic rack form, pitches and accuracy (diametral pitch series)

MCE/5This standard has been withdrawn as it is covered by ISO 1328-1:1995

BS 436-2:1970

Basic rack form, modules and accuracy (1 to 50 metric module)

MCE/5This standard has been withdrawn as it is covered by ISO 1328-2:1997

BS 436-3:1986

Method for calculation of contact and root bending stress limitations for metallic involute gears

MCE/5This standard has been withdrawn as it is now covered by BS ISO 6336 Parts 1 to 3 and Part 5, BS ISO 9083, BS ISO 9084 and BS ISO 9085

BS 436-4:1996

Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth

MCE/5This standard has been withdrawn as it is covered by ISO 1328-1 and ISO 1328-2

of 75BRITISH STANDARDS WITHDRAWN

BS 903:-Physical testing of rubber

BS 903-A2:1995

Method for determination of tensile stress-strain properties

PRI/22Superseded by BS ISO 37:2005

BS 1075:1989

Specification for tungsten halogen lamps (non vehicle)

CPL/34/1Superseded by BS EN 60357:2003

BS 1743:-

Methods for analysis of dried milk and dried milk products

BS 1743-16:-

Determination of nitrate and nitrite contents

BS 1743-16.1:1983

Method for dried milk by cadmium reduction

AW/5This standard has been withdrawn as the international standard on which this was based has also been withdrawn

BS 3680:-

Measurement of liquid flow in open channels

BS 3680-3:-Stream flow measurement

BS 3680-3E:1993

Measurement of discharge by the ultrasonic (acoustic) method

CPI/113Superseded by BS EN ISO 6416:2005

BS 4337:1968

Specification for principal dimensions of hand-operated stillage trucks

MHE/7This standard has been withdrawn as it is covered by ISO 938:1975 ('Hand-operated stillage trucks. Principal dimensions')

BS 5724:-Medical electrical equipment

BS 5724-2:-Particular requirements for safety

BS 5724-2-6:1985

Specification for microwave therapy equipment

CH/62/4This standard has been withdrawn as it is no longer used

BS 5724-2-14:1989

Specification for electroconvulsive therapy equipment

CH/62/4This standard has been withdrawn as it is no longer used

BS 6068:-Water quality

BS 6068-4:-Microbiological methods

BS 6068-4.2:1989

Guide to the enumeration of micro-organism by culture

EH/3Superseded by BS ISO 8199:2005

BS 6073:-Precast concrete masonry units

BS 6073-1:1981

Specification for precast concrete masonry units

B/519/1Superseded by BS EN 771-3:2003 and BS EN 772-2:1998

BS 6431:-Ceramic floor and wall tiles

BS 6431-1:1983

Specification for classification and marking, including definitions and characteristics

B/539Superseded by BS EN 14411:2003

BS 6431-2:1984

Specification for extruded ceramic tiles with a low water absorption ( $3L 3%). Group A1


BS 6431-3.1:1986

Extruded ceramic tiles with a water absorption of 3%


BS 6431-3.2:1986



BS 6431-4.1:1986



BS 6431-4.2:1986



BS 6431-5:1986

Specification for extruded ceramic tiles with a water absorption of $0G 10%. Group AIII


BS 6431-6:1984

Specification for dust-pressed ceramic tiles with a low water absorption ( $3L 3%). Group B1


BS 6431-7:1986

Specification for dust-pressed ceramic tiles with a water absorption of 3%


BS 6431-8:1986

Specification for dust-pressed ceramic tiles with a water absorption of 6%


BS 6431-9:1984

Specification for dust-pressed ceramic tiles with a water absorption of $0G 10%. Group BIII


BS 6431-10:1984

Method for determination of dimensions and surface quality

B/539Superseded by BS EN ISO 10545-2:1997


BS 6431-11:1983

Method for determination of water absorption


BS 6431-12:1983

Method for determination of modulus of rupture


BS 6431-13:1986

Method for determination of scratch hardness of surface according to Mohs

B/539This standard has been withdrawn in line with the general withdrawal of the BS 6431 series, although it is not directly superseded by any replacement document

BS 6431-14:1983

Method for determination of resistance to deep abrasion. Unglazed tiles


BS 6431-15:1983

Method for determination of linear thermal expansion


BS 6431-16:1983

Method for determination of resistance to thermal shock


BS 6431-17:1983

Method for determination of crazing resistance. Glazed tiles


BS 6431-18:1983

Method for determination of chemical resistance. Unglazed tiles


BS 6431-19:1984

Method for determination of chemical resistance. Glazed tiles

B/539Superseded by BS EN ISO 10545:1997 Parts 13 & 14

BS 6431-20:1984

Method for determination of resistance to surface abrasion. Glazed tiles


BS 6431-21:1984

Method for determination of moisture expansion using boiling water. Unglazed tiles


BS 6431-22:1986

Method for determination of frost resistance


BS 6431-23:1986

Specification for sampling and basis for acceptance


BS 6746C:1993

Colour chart for insulation and sheath of electric cables

GEL/20/17This standard has been withdrawn as from 1 April, 2006 all references contained within it will cease to be valid

BS 7016:-

Components and systems of reciprocating internal combustion engines

BS 7016-6:1992

Glossary of terms for lubricating systems

MCE/14Superseded by BS ISO 7967-6:2005

BS 7628:1993

Specification for combined transformers

PEL/38Superseded by BS EN 60044-3:2003

BS 7704:1993

Specifications for silicone liquids for electrical purposes

GEL/10Superseded by BS EN 60836:2005

BS 7799:-Information security management

BS 7799-2:2002Specification with guidance for use

BDD/2Superseded by BS ISO/IEC 27001:2005

BS 7879:1997

Sectional specification for equipment cables to be used for digital and analogue communications

EPL/46/1This standard has been withdrawn as HD 609 S1:1995, with which it is identical, was withdrawn by CENELEC in November 2003

BS EN 12019:1998

Zinc and zinc alloys. Optical emission spectrometric analysis

NFE/8Superseded by BS EN ISO 3815:2005 Parts 1 & 2

BS EN 50144:-

Safety of hand-held electric motor operated tools


BS EN 50144-2-1:2000Drills

CPL/61/6Superseded by BS EN 60745-2-1:2003

BS EN 50144-2-2:2000Screwdrivers and impact wrenches


BS EN 50144-2-17:2000Routers


BS EN 50144-2-18:2000Laminate trimmers



BS EN 50260:-

Safety of hand-held battery-powered motor-operated tools and battery packs


BS EN 50260-2-1:2002Drills


BS EN 50260-2-2:2002Screwdrivers and impact wrenches


BS EN 50260-2-14:2002Routers and laminate trimmers


BS EN 50268:-

Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions

BS EN 50268-2:2000Procedure

GEL/20/18Superseded by BS EN 61034-2:2005

BS EN 60335:-

Specification for safety of household and similar electrical appliances


BS EN 60335-2-34:2000Motor-compressors


BS EN 60335-2-36:2000

Commercial electric cooking ranges, ovens, hobs and hob elements


BS EN 60335-2-37:2000Commercial electric deep fat fryers


BS EN 60335-2-45:1997

Portable heating tools and similar appliances


BS EN 60335-2-88:1997

Humidifiers intended for use with heating, ventilation, or air-conditioning systems


BS EN 60417:-

Graphical symbols for use on equipment

BS EN 60417-1:1999Overview and application

GEL/3In 2002 IEC launched an 'on-line' database format for the symbol library, available on subscription from the IEC web-site. Following this decision, in 2004 CENELEC decided to cease publication of EN 60417 in 'paper' form, to withdraw the then-existing sta

BS EN 60417-2:1999Symbol originals


BS EN 60617:-Graphical symbols for diagrams

BS EN 60617-2:1996

Symbol elements, qualifying symbols and other symbols having general application


BS EN 60617-3:1996

Conductors and connecting devices


BS EN 60617-4:1996Basic passive components


BS EN 60617-5:1996Semiconductors and electron tubes


BS EN 60617-6:1996

Production and conversion of electrical energy


BS EN 60617-7:1996

Switchgear, controlgear and protective devices



BS EN 60617-8:1996

Measuring instruments, lamps and signalling devices


BS EN 60617-9:1996

Telecommunications. Switching and peripheral equipment


BS EN 60617-10:1996

Telecommunications. Transmission


BS EN 60617-11:1997

Architectural and topographical installation plans and diagrams


BS EN 60617-12:1999Binary logic elements


BS EN 60617-13:1993Analogue elements


BS EN 60622:1996

Sealed nickel-cadmium prismatic rechargeable single cells

PEL/21Superseded by BS EN 60622:2003

BS EN 60734:1993

Specification for hard water to be used for testing the performance of some household electrical appliances

CPL/59Superseded by BS EN 60734:2003

BS EN 60742:1996

Isolating transformers and safety isolating transformers. Requirements

PEL/96Superseded by BS EN 61558-2:1998 Parts 1, 2, 4 & 5 and BS EN 61558-2:1999 Parts 8 & 9

BS EN 60896:-

Stationary lead-acid batteries. General requirements and methods of test

BS EN 60896-1:1992Vented types


BS EN 61056:-

Portable lead-acid cells and batteries (valve-regulated types)

BS EN 61056-1:1993

General requirements, functional characteristics. Methods of test


BS EN 61056-2:1997

Dimensions, terminals and markings


BS EN 61809:2001

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed alkaline secondary cells and batteries

PEL/21/1Superseded by BS EN 62133:2003

PD 3001:2002

Preparing for BS 7799-2 certificationSuperseded by BIP 0071:2005

PD ES 59008:-

Data requirements for semiconductor die

PD ES 59008-6:-

Exchange data formats and data dictionary

PD ES 59008-6-1:1999Data exchange. DDX file format

EPL/47Superseded by BS EN 62258-2:2005

PAS 36:-Goals for small-sided football

PAS 36-1:2000Specification for metal goals

SW/14Superseded by BS 8462:2005

PAS 36-2:2000Specification for plastics goals

SW/14Superseded by BS 8462:2005

EP 230

BSI electronic book. Disability access (BS 8300:2001) CD-ROMSuperseded by BIP 3044:2005

BRITISH STANDARDS UNDER REVIEWBS ISO 14368:-

Mineral and sapphire watch-glasses

BS ISO 14368-1:2000Dimensions and tolerances

STI/53

NEW WORK STARTED

BS 5395:-Stairs, ladders and walkways

of 75NEW WORK STARTED

BS 5395-1 (Revision)

Code of practice for the design, construction and maintenance of straight stairs and winderswill supersede BS 5395-1:2000

B/208

BS 8103:-

Structural design of low-rise buildings


Code of practice for stability, site investigation, foundations and ground floor slabs for housingwill supersede BS 8103-1:1995

B/204/1


Code of practice for timber floors and roofs for housingwill supersede BS 8103-3:1996

B/204/2


Code of practice for suspended concrete floors for housingwill supersede BS 8103-4:1995

B/204/3

BS 8298:-

Code of practice for the design and installation of natural stone cladding and lining

BS 8298-2

Traditional handset external claddingwill partially supersede BS 8298:1994

B/545

BS 8298-3

Stone-faced pre-cast concrete cladding systemswill partially supersede BS 8298:1994

B/545

BS 8298-4

Rainscreen and stone on metal frame cladding systemswill partially supersede BS 8298:1994

B/545

BS 8298-5Internal linings

will partially supersede BS 8298:1994B/545

BS 8480

Medical devices. Chairs with electrically operated support surfaces. Requirements

FW/1/-/1

BS 8481

Design, preparation and application of internal gypsum, cement and/or lime and polymer plastering systems

B/544

BS XXXX

Guide to business continuity management

BCM/1/-/2

BS N 100:-

Aircraft oxygen systems and equipment

BS 5N 100-5 (Revision)

Guide to fire and explosion hazards associated with oxygenwill supersede BS 4N 100-5:1999

ACE/38

BS EN 54:-

Fire detection and fire alarm systems

BS EN 54-2:1998/Amendment 3Control and indicating equipment

FSH/12

BS EN 250:2000/Amendment 1

Open-circuit self-contained compressed air diving apparatus

PH/4/7

BS EN 473 (Revision)

Non-destructive testing. Qualification and certification of NDT personnel. General principleswill supersede BS EN 473:2000

WEE/46


Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and boardwill supersede BS EN 648:2003

PAI/11

BS EN 1330:-

Non-destructive testing. Terminology

BS EN 1330-4 (Revision)Terms used in ultrasonic testing

will supersede BS EN 1330-4:2000WEE/46

BS EN 1330-9 (Revision)

Terms used in acoustic emission testingwill supersede BS EN 1330-9:2000

WEE/46

BS EN 1993:-

Eurocode 3: Design of steel structures

BS EN 1993-1-12

Additional rules for the extension of EN 1993 up to steel grades S 700

B/525/31

BS EN XXXX:-

Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products

BS EN XXXX-1

Specification for bonded and loose-fill products before installation

B/540

BS EN XXXX-2

Specification for the installed products

B/540

BS EN 10016:-

Non-alloy steel rod for drawing and/or cold rolling

BS EN 10016-1 (Revision)General requirements

will supersede BS EN 10016-1:1995ISE/71


Specific requirements for general purpose rodwill supersede BS EN 10016-2:1995

ISE/71


Specific requirements for rimmed and rimmed substitute low carbon steel rodwill supersede BS EN 10016-3:1995

ISE/71



Specific requirements for rod for special applicationswill supersede BS EN 10016-4:1995

ISE/71

BS EN ISO 10423 (Revision)

Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipmentwill supersede BS EN ISO 10423:2004 (CD-ROM)

PSE/17/-/4

BS EN ISO 10426:-

Petroleum and natural gas industries. Cements and materials for well cementing

BS EN ISO 10426-6

Methods for determining the static gel strength of cement formulations

PSE/17/-/3

BS EN 12059

Natural stone products. Dimensional stone work. Requirements

B/545


Non-destructive examination of welds. General rules for metallic materialswill supersede BS EN 12062:1998

WEE/46

BS EN 12407

Natural stone test methods. Petrographic examination

B/545

BS EN 12440

Natural stone. Denomination criteria

B/545

BS EN 12543:-

Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing


Pinhole camera radiographic methodwill supersede BS EN 12543-2:1999

WEE/46


Non-destructive testing. Terminology. Terms used in penetrant testingwill supersede BS EN ISO 12706:2001

WEE/46

BS EN 13279:-

Gypsum binders and gypsum plasters

BS EN 13279-1:2005/Amendment 1Definitions and requirements

B/544

BS EN 13279-2:2004/Amendment 1Test methods

B/544

BS EN 13322:-

Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction

BS EN 13322-1:2003/Amendment 1Carbon steel

PVE/3/3


Common rules for precast concrete products

B/524


Postal service. Quality of service. Measurement of the transit time of end-to end services for single piece priority mail and first class mail. Extension of the standard to cover flows with smaller mail volumes in an enlarged EU

SVS/4

BS EN 13860:-

Non-destructive testing. Eddy current examination. Equipment characteristics and verification


Instrument characteristics and verificationwill supersede BS EN 13860-1:2003

WEE/46


Probe characteristics and verificationwill supersede BS EN 13860-2:2003

WEE/46


System characteristics and verificationwill supersede BS EN 13860-3:2003

WEE/46

BS EN 13914:-

Design, preparation of external rendering and internal plastering

BS EN 13914-1:2005/Amendment 1External rendering

B/544/5

BS EN 13914-2:2005/Amendment 1

Design considerations and essential principles for internal plastering

B/544/4


Thermoplastic and flexible metal pipework for underground installation at petrol filling stations

PVE/21

BS EN 14390

Fire test. Large-scale room reference test for surface products

FSH/21


Postal service. Quality of service. Measurement of the transit time of end-to end services for single piece priority mail and first class mail. Extension of the standard to cover flows with smaller mail volumes in an enlarged EU

SVS/4

BS EN ISO 15011:-

Health and safety in welding and allied processes. Laboratory methods for sampling fume and gases

BS EN ISO 15011-1 (Revision)

Determination of emission rate and sampling for analysiswill supersede BS EN ISO 15011-1:2002

WEE/40

BS EN ISO 15011-2 (Revision)

Determination of emission rates of gases, except ozone and sampling for analysiswill supersede BS EN ISO 15011-2:2003

WEE/40


BS EN ISO 15012:-

Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration

BS EN ISO 15012-3

Determination of the capture efficiency of welding fume extraction devices

WEE/40

BS EN 15366

Winter and road service area maintenance equipment. Solid absorbents intended for road usage

AGE/32

BS EN 15377:-

Heating systems in buildings. Design of embedded water based surface heating and cooling systems

BS EN 15377-1

Determination of the design heating and cooling capacity

RHE/24

BS EN 15378

Heating systems in buildings. Inspection of boilers and heating systems

RHE/24

BS EN ISO 21952

Welding consumables. Wires and rods for gas shielded arc welding of creep-resisting steel. Classificationwill supersede BS EN 12070:2000

WEE/39

BS EN ISO 24598

Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode flux combinations for submerged arc welding of creep resistant steels. Classification

WEE/39

BS EN ISO 25457

Petroleum, petrochemical and natural gas industries. Flares details for general refinery and petrochemical service

PSE/17/-/6

BS EN WI 00344002

Guidelines for the safe use of static steel racking and shelving. Users guide

MHE/8

BS EN 50136:-

Alarm systems. Alarm transmission systems and equipment

BS EN 50136-1-1 (Revision)

System general requirements for alarm transmission systemswill supersede BS EN 50136-1-1:1998

GW/1/11


Requirements for systems using dedicated alarm pathswill supersede BS EN 50136-1-2:1998

GW/1/11


Requirements for systems with digital communicators using the public switched telephone networkwill supersede BS EN 50136-1-3:1998

GW/1/11


Requirements for systems with voice communicators using the public switched telephone networkwill supersede BS EN 50136-1-4:1998

GW/1/11

BS EN 50136-1-5

Requirements for transmission network using IP technology

GW/1/11

BS EN 50136-1-6

Requirements for mobile alarm systems reporting fault alarm position

GW/1/11


General requirements for alarm transmission equipmentwill supersede BS EN 50136-2-1:1998

GW/1/11


Requirements for equipment used in systems using dedicated alarm pathswill supersede BS EN 50136-2-2:1998

GW/1/11


Requirements for equipment used in systems with digital communicatorswill supersede BS EN 50136-2-3:1998

GW/1/11


Requirements for equipment used in systems with voice communicatorswill supersede BS EN 50136-2-4:1998

GW/1/11

BS EN 50136-2-5

Requirements for equipment used in transmission equipment using IP technology

GW/1/11

BS EN 50XXX

Human exposure to EMF in railway applications

GEL/9

BS EN 60335:-

Household and similar electrical appliances. Safety

BS EN 60335-2-27:2003/Amendment 2Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

CPL/61/01

BS EN 60456:2005/Corrigendum

Clothes washing machines for household use. Methods for measuring the performance

CPL/59/1

BS EN 60598:-Luminaires


BS EN 60598-2-3:2003

Luminaires for road and street lighting

CPL/34/4

BS EN 60598-2-10:2003Portable luminaires for children

CPL/34/4

BS EN 60598-2-11:2005Aquarium luminaires

CPL/34/4


BS EN 61800:-

Adjustable speed electrical power drive systems

BS EN 61800-7

Generic interface and user profiles for power drive systems

PEL/22

BS EN 61903

Energy efficiency limits for information technology and communication technology equipment

EPL/108

BS EN 62075

Standard for environmental aspects related to electronic equipment within the fields of audio/video, information technology and communications technology

EPL/108

BS EN 62368

Audio/video, information and communication technology equipment. Safety requirements

EPL/108

BS EN 62441

Accidentally caused candle flame ignition of AV and IT products

EPL/108

BS EN 00121471

Acceptance criteria for time of flight diffraction inspection technique

WEE/46

BS ISO 212 (Revision)Essential oils. Sampling

will supersede BS ISO 212:1973AW/54

BS ISO 815:-

Rubber, vulcanized or thermoplastic. Determination of compression set

BS ISO 815-2Low temperatures

PRI/22

BS ISO 2910 (Revision)

Cinematography. Screen luminance and chrominance for the projection of motion pictureswill supersede BS ISO 2910:1990

CPW/36

BS ISO 4720 (Revision)Essential oils. Nomenclature

will supersede BS ISO 4720:1992AW/54

BS ISO 5631:-

Paper and board. Determination of colour

BS ISO 5631-2

Outdoor daylight conditions (D65/10$0D), diffuse reflectance method

PAI/11

BS ISO 5631-3

(D50/2$0D) diffuse reflectance method

PAI/11

BS ISO 6385:-Ergonomics

BS ISO 6385-1

Basic concepts, terms and definitions

PH/9

BS ISO 6385-2

Ergonomic principles in the design of work systems

PH/9

BS ISO 9416

Paper. Determination of light scattering and absorption coefficients (Kubelka-Munk theory)

PAI/11

BS ISO 12637:-Graphic technology. Vocabulary

BS ISO 12637-3Printing terms

PAI/43

BS ISO 13341:1997/Amendment 1

Transportable gas cylinders. Fitting of valves to gas cylinders

PVE/3/1

BS ISO 13906

Animal feeding stuffs. Determination of acid detergent fibre content and lignin

AW/10

BS ISO 15242:-

Rolling bearings. Measuring methods for vibration

BS ISO 15242-4

Radial cylindrical roller bearings with cylindrical bore and outside surface

MCE/7


Information and documentation. International standard audiovisual number (ISAN). Amendment 1: Alternate encodings and editorial changes

IDT/2/1


Gas cylinders. Residual pressure valves. General requirements and type testing

PVE/3/1

BS ISO 16014:-

Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography

BS ISO 16014-1 (Revision)General principles

will supersede BS ISO 16014-1:2003PRI/21

BS ISO 16110:-

Hydrogen generators using fuel processing technologies

BS ISO 16110-1Safety

PVE/18

BS ISO 17052

Rubber, raw. Determination of residual monomers and other volatile molecular weight compounds by capillary gas chromatography. Thermal desorption (dynamic headspace) method

PRI/23

BS ISO 19933

Space systems. Format for spacecraft launch environment test report

ACE/68

BS ISO 21308:-

Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)


BS ISO 21308-1General principles

AUE/9

BS ISO 21549:-

Health informatics. Patient healthcare data

BS ISO 21549-5Identification data

IST/35

BS ISO 21549-6Administrative data

IST/35

BS ISO 22002

Quality management systems. Guidance on the application of ISO 9001. 2000 for crop production

AW/90

BS ISO 22003

Food safety management systems. Requirements for bodies providing audit and certification of food safety management systems

AW/90

BS ISO 22005

Traceability in the feed and food chain. General principles and basic requirements for system design and implementation

AW/90

BS ISO 26000Social responsibility. Guidance

SDS/1

BS ISO XXXXX

Air quality. Stationary source emissions. Quality assurance of automated measuring systems

EH/2/1

BS IEC 60027:-

Letter symbols to be used in electrical technology

BS IEC 60027-X

Power generation, transmission and distribution

SS/7

BS IEC 62438

Mobile instrumentation for measurement of gamma and neutron radiation in the environment

NCE/2

BS IEC 62444

Cable glands for electrical installations

PEL/213

DD IEC/PAS 62437

Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices. Limits and methods of measurement. Specifications for active antennas

GEL/210/11

PD 6662:2004/Amendment 1

Scheme for the application of European Standards for intruder and hold-up alarm systems

GW/1

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT05/19972019 DC

BS EN 3745 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 100. General

ACE/6/-/10

05/19989899 DC

BS EN 15330 Surfaces for sports areas. Synthetic turf surfaces primarily designed for outdoor use. Specification

PRI/57Comments for the above document are required by 31 December, 2005

05/19991670 DC

EN 3826 Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 70 IRHD

ACE/65/-/25

05/19991671 DC

BS EN 3826 Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 70 IRHD

ACE/65/-/25

05/19992193 DC

BS EN 3825 6. Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 60 IRHD

ACE/65/-/25Comments for the above document are required by 14 January, 2006

05/30046994 DC

BS ISO 18589-2 7. Measurements of radioactivity in the environment. Soil. Part 2. Method for the selection of sampling strategy sampling and pre-treatment of samples

NCE/2

05/30066638 DC

EN 15424 Sterilization of medical devices. Development, validation and routine control of sterilization processes. Low temperature steam and formaldehyde

CH/198

05/30070377 DC

ISO 10441 Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. Special purpose applications

PSE/17/-/6Comments for the above document are required by 6 February, 2006

05/30083256 DC

EN 14944-3 Influence of cementitious products on water intended for human consumption. Part 3. Migration of substances from factory-made cementitious products

EH/6

05/30097499 DC

DD prCEN/TR 15353 Guidelines for the development of standards relating to recycled plastics

PRI/89

05/30098143 DC

ISO 2186 Fluid flow in closed conduits. Connections for pressure signal transmissions between primary and secondary elements

CPI/30/2

05/30102288 DC

ISO 17321-1 Graphic technology and photography. Colour characterization of digital still cameras (DSCs). Part 1. Stimuli , metrology, and test procedures

CPW/42

05/30104509 DC

HD 605 S2 Electrical cables. Additional test methods£18.00 members£36.00 non-members

GEL/20/16

of 75DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

05/30107187 DC

IEC 60034-28 Rotating electrical machines. Part 28. Test methods for determining quantities of equivalent circuit diagrams for three-phase cage induction machines

PEL/2

05/30107808 DC

ISO 2789 Information and documentation. International library statistics

IDT/2/15Comments for the above document are required by 2 January, 2006

05/30109753 DC

ISO 15181-3 Paints and varnishes. Determination of the release rate of biocides from antifouling paints. Part 3. Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylene thiourea in the e

STI/10

05/30112087 DC

ISO 14113 Gas welding equipment. Rubber and plastic hose and hose assemblies for use with industrial gases up to 450 bar

WEE/18

05/30116423 DC

EN ISO 11140-3 Sterilization of health care products. Chemical indicators. Part 3. Class 2 indicators systems for use in the Bowie and Dick steam penetration test

LBI/35Comments for the above document are required by 20 January, 2006

05/30116432 DC

EN ISO 11140-4 Sterilization of health care products. Chemical indicators. Part 4. Class 2 indicators as an alternative to Bowie and Dick test for detection of steam penetration

LBI/35Comments for the above document are required by 20 January, 2006

05/30117030 DC

BS 5892-3 AMD 1 Railway rolling stock materials. Part 3. Specification for monobloc wheels for traction and trailing stock

RAE/3/-/1

05/30117032 DC

BS 5892-6 AMD 2 Railway rolling stock materials. Part 6. Specification for wheelsets for traction and trailing stock

RAE/3/-/1

05/30119049 DC

IEC 62363 Radiation protection instrumentation. Portable photon contamination meters and monitors

NCE/2

05/30122393 DC

ISO 2846-1 Graphic technology. Colour and transparency of ink sets for four-colour-printing. Part 1. Sheet-fed and heat-set web offset lithographic printing

PAI/43

05/30126362 DC

BS IEC 60027-6 Letter symbols to be used in electrical technology. Part 6. Control technology

SS/7

05/30128487 DC

ISO 2846-2 Graphic technology. Colour and transparency of printing ink sets for four colour printing. Part 2. Coldset offset lithographic printing

PAI/43

05/30128557 DC

ISO 12639 AMD 1 Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT)

PAI/43

05/30128651 DC

ISO 20860-1 Road vehicles. 50 ohms impedance radio frequency interface (50 ohms RFI). Part 1. Dimensions and electrical requirements

AUE/9

05/30129035 DC

ISO 15917 Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials. Dimensions

MTE/5

05/30129041 DC

ISO 22037 Solid end mills with corner radii and cylindrical shanks made of hard cutting materials. Dimensions

MTE/5

05/30129166 DC

BS ISO 281 Rolling bearings. Dynamic load ratings and rating life

MCE/7

05/30129656 DC

IEC 61156-3-1 Multicore and symmetrical pair/quad cables for digital communications. Part 3-1. Work area wiring. Blank detail specification

EPL/46

05/30129662 DC

IEC 61156-5 Multicore and symmetrical pair/quad cables for digital communications. Part 5. Symmetrical pair/quad cables with transmission characteristics up to 600 MHz. Horizontal floor wiring

EPL/46

05/30130119 DC

ISO 4360 Liquid flow measurement in open channels by weirs and flumes. Triangular profile weirs

CPI/113/2

05/30130710 DC

BS 2869 Specification for fuel oils for agricultural, domestic and industrial engines and boilers

PTI/2Comments for the above document are required by 31 December, 2005

05/30131497 DC

ISO 12640-3 Graphic technology. Prepress digital data exchange. Part 3. CIELAB standard colour image data (CIELAB/SCID)

PAI/43


05/30132083 DC

ISO/DIS 4126-9 Safety devices for protection against excessive pressure. Part 9. Application and installation of safety devices excluding stand alone bursting disc safety devices

PVE/12

05/30132215 DC

ISO 17078-2 Petroleum and natural gas industries. Drilling and production equipment. Part 2. Flow control devices for side-pocket mandrels£18.00 members£36.00 non-members

PSE/17/-/4

05/30132817 DC

ISO 4926 Road vehicles. Hydraulic braking systems. Non-petroleum base reference fluids

PRI/69

05/30133584 DC

BS 9990 Code of practice for non-automatic fire-fighting systems in buildings

FSH/14Comments for the above document are required by 30 December, 2005

05/30134382 DC

ISO 839-1 Milling machine arbors with 7/24 tapers. Part 1. Dimensions

MTE/5

05/30134386 DC

ISO 2780 Milling cutters with tenon drive. Interchangeability dimensions for cutter arbors. Metric series

MTE/5

05/30134391 DC

ISO 3338-2 Cylindrical shank for milling cutters. Part 2. Dimensional characteristics of flatted cylindrical shanks

MTE/5

05/30134411 DC

ISO/IEC 9973 Information technology. Computer graphics, image processing and environmental data representation. Procedures for registration of items

IST/31

05/30135007 DC

ISO/IEC 19798 Method for the determination of toner cartridge yield for colour electrophotographic printers and multi-function devices that contain printer components

IST/3

05/30135010 DC

ISO/IEC 19799 Information technology. Method of measuring gloss uniformity on printed pages

IST/3

05/30136898 DC

BS 5892-1 AMD 1 Railway rolling stock materials. Part 1. Specification for axles for traction and trailing stock

RAE/3/-/1

05/30137375 DC

ISO 22672 Space data and information transfer systems. Space link extension (SLE). Forward space packet

ACE/68Comments for the above document are required by 3 January, 2006

05/30137378 DC

ISO 22644 Space data and information transfer systems. Orbit data messages


05/30137984 DC

EN 15273-3 Railway applications. Gauges. Part 3. Structure gauges

RAE/1/-/12Comments for the above document are required by 10 January, 2006

05/30137997 DC

EN 15320 Identification card systems. Surface transport applications. Interoperable public transport application (IOPTA)£18.00 members£36.00 non-members

IST/17

05/30139632 DC

BS EN ISO 6647-1 Rice. Determination of amylose content. Part 1. Reference method

AW/4

05/30139638 DC

EN ISO 6647-2 Rice. Determination of amylose content. Part 2. Routine methods

AW/4

05/30139830 DC

IEC 60068-2-69 ED 2 Environmental testing. Part 2-69. Tests. Test Te. Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method

EPL/501

05/30139836 DC

IEC CISPR 12 ED 6 Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers

GEL/210/11

05/30139843 DC

IEC CISPR 25 ED 3 Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers

GEL/210/11

05/30139880 DC

BS ISO 20898 Industrial trucks. Electrical requirements

MHE/7

05/30139920 DC

IEC 62258-5 Semiconductor die products. Part 5. Requirements for information concerning electrical simulation

EPL/47

05/30139923 DC

IEC 62258-6 Semiconductor die products. Part 6. Requirements for information concerning thermal simulation

EPL/47

05/30139930 DC

IEC 60684-3-246 ED 3 Flexible insulating sleeving. Part 3. Specifications for individual types of sleeving. Sheet 246. Heatshrinkable polyolefin sleeving, dual wall, not flame retarded

GEL/15


05/30139951 DC

ISO 9727-1 Cylindrical cork stoppers. Physical tests. Part 1. Determination of dimensions

PRI/81Comments for the above document are required by 20 January, 2006

05/30139954 DC

ISO 9727-2 Cylindrical cork stoppers. Physical tests. Part 2. Determination of mass and apparent density


05/30139960 DC

ISO 9727-3 Cylindrical cork stoppers. Physical tests. Part 3. Determination of humidity content


05/30139963 DC

ISO 9727-4 Cylindrical cork stoppers. Physical tests. Part 4. Determination of dimensional recovery after compression

PRI/81Comments for the above document are required by 20 January, 200605/30139963 DC

ISO 9727-4 62. Cylindrical cork stoppers. Physical tests. Part 4. Determination of dimensional recovery after compression


05/30139966 DC

ISO 9727-5 Cylindrical cork stoppers. Physical tests. Part 5. Determination of extraction strength


05/30139975 DC

ISO 9727-6 Cylindrical cork stoppers. Physical tests. Part 6. Determination of liquid tightness


05/30139981 DC

ISO 9727-7 Cylindrical cork stoppers. Physical tests. Part 7. Determination of powder


05/30139998 DC

ISO 7176-19 Wheelchairs. Part 19. Wheeled mobility devices for use as seats in motor vehicles

CH/173/1

05/30140005 DC

BS EN ISO 14971 ED 2 Medical devices. Application of risk management to medical devices

CH/210/4Comments for the above document are required by 31 December, 2005

05/30140016 DC

ISO 5518 Fruits, vegetables and derived products. Determination of benzoic acid content. Spectrophotometric method

AW/21

05/30140043 DC

ISO 19813 Road vehicles. Ignition systems. Test methods and requirements for high voltage boots on plug-top coils and pencil coils

MCE/9

05/30140060 DC

IEC 60068-2-64 ED 2 Environmental testing. Part 2-64. Test methods. Test Fh. Vibration, broad-band random (digital control) and guidance

GEL/104

05/30140065 DC

EN 3155-071 Aerospace series. Electrical contacts used in elements of connection. Part 071. Contacts, electrical, female, type A, crimp, class S. Product Standard


05/30140068 DC

EN 3155-070 Aerospace series. Electrical contacts used in elements of connection. Part 070. Contacts, electrical, male, type A, crimp, class S. Product Standard


05/30140086 DC

EN 3475-505 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 505. Tensile test on conductors and strands

ACE/6/-/2Comments for the above document are required by 31 December, 2005

05/30140090 DC

EN 3475-506 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 506. Plating continuity


05/30140093 DC

EN 3475-507 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 507. Adherence of plating


05/30140097 DC

EN 3475-508 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 508. Plating thickness


05/30140100 DC

EN 3475-514 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 514. Porosity of copper cladding on aluminium strands


05/30140103 DC

IEC 62226-3-1 Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body. Part 3-1. Exposure to electric fields. Analytical and 2D

GEL/106


05/30140138 DC

IEC 61937-8 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Part 8. Non-linear PCM bitstreams according to the Windows Media Audio Professional

EPL/100

05/30140143 DC

IEC 60958-3 ED 3 Digital audio interface. Part 3. Consumer applications

EPL/100

05/30140149 DC

IEC 60512-15-1 Connectors for electronic equipment. Tests and measurements. Part 15-1. Connector tests (mechanical). Test 15a. Contact retention in insert

EPL/48

05/30140162 DC

ISO 22734-1 Hydrogen generators using water electrolysis process. Part 1. Industrial and commercial applications

PVE/3Comments for the above document are required by 31 December, 2005

05/30140168 DC

IEC 62025-1 ED 2 High frequency inductive components. Non-electrical characteristics and measuring methods. Part 1. Fixed, surface mounted inductor for use in electronic and telecommunication equipment

EPL/51Comments for the above document are required by 30 December, 2005

05/30140212 DC

IEC 60512-15-2 Connectors for electronic equipment. Tests and measurements. Part 15-2. Connector tests (mechanical). Test 15b. Insert retention in housing (axial)

EPL/48Comments for the above document are required by 1 January, 2006

05/30140216 DC

IEC 60512-15-3 Connectors for electronic equipment. Tests and measurements. Part 15-3. Connector tests (mechanical). Test 15c. Insert retention in housing (torsional)


05/30140221 DC

IEC 60512-15-4 Connectors for electronic equipment. Tests and measurements. Part 15-4. Connector tests (mechanical). Test 15d. Contact insertion, release and extraction force


05/30140225 DC

IEC 60512-15-5 Connectors for electronic equipment. Tests and measurements. Part 15-5. Connector tests (mechanical). Test 15e. Contact retention in insert, cable nutation


05/30140229 DC

IEC 60512-15-6 Connectors for electronic equipment. Tests and measurements. Part 15-6. Connector tests (mechanical). Test 15f. Effectiveness of connector coupling devices


05/30140234 DC

IEC 60512-15-7 Connectors for electronic equipment. Tests and measurements. Part 15-7. Connector tests (mechanical). Test 15g. Robustness of protective cover attachment


05/30140239 DC

IEC 60512-16-1 Connectors for electronic equipment. Tests and measurements. Part 16-1. Mechanical tests on contacts and terminations. Test 16a. Probe damage


05/30140246 DC

IEC 60512-16-2 Connectors for electronic equipment. Tests and measurements. Part 16-2. Mechanical tests on contacts and terminations. Test 16b. Restricted entry


05/30140250 DC

IEC 60512-16-3 Connectors for electronic equipment. Tests and measurements. Part 16-3. Mechanical tests on contacts and terminations. Test 16c. Contact bending strength


05/30140254 DC

IEC 60512-16-4 Connectors for electronic equipment. Tests and measurements. Part 16-4. Mechanical tests on contacts and terminations. Test 16d. Tensile strength (crimped connections)


05/30140258 DC

IEC 60512-16-5 Connectors for electronic equipment. Tests and measurements. Part 16-5. Mechanical tests on contacts and terminations. Test 16e. Gauge retention force (resilient contacts)



05/30140262 DC

IEC 60512-16-6 Connectors for electronic equipment. Tests and measurements. Part 16-6. Mechanical tests on contacts and terminations. Test 16f. Robustness of terminations


05/30140266 DC

IEC 60512-16-7 Connectors for electronic equipment. Tests and measurements. Part 16-7. Mechanical tests on contacts and terminations. Test 16g. Measurement of contact deformation after crimping


05/30140270 DC

IEC 60512-16-8 Connectors for electronic equipment. Tests and measurements. Part 16-8. Mechanical tests on contacts and terminations. Test 16h. Insulating grip effectiveness (crimped connections)


05/30140277 DC

IEC 60512-16-9 Connectors for electronic equipment. Tests and measurements. Part 16-9. Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force


05/30140281 DC

IEC 60512-16-11 Connectors for electronic equipment. Tests and measurements. Part 16-11. Mechanical tests on contacts and terminations. Test 16k. Stripping force, solderless wrapped connections


05/30140285 DC

IEC 60512-16-13 Connectors for electronic equipment. Tests and measurements. Part 16-13. Mechanical tests on contacts and terminations. Test 16m. Unwrapping, solderless wrapped connections


05/30140290 DC

IEC 60512-16-14 Connectors for electronic equipment. Tests and measurements. Part 16-14. Mechanical tests on contacts and terminations. Test 16n. Bending strength fixed male tabs


05/30140295 DC

IEC 60512-16-16 Connectors for electronic equipment. Tests and measurements. Part 16-16. Mechanical tests on contacts and terminations. Test 16p. Torsional strength, fixed male tabs


05/30140300 DC

IEC 60512-16-17 Connectors for electronic equipment. Tests and measurements. Part 16-17. Mechanical tests on contacts and terminations. Test 16q. Tensile and compressive strength, fixed male tabs


05/30140305 DC

IEC 60512-16-18 Connectors for electronic equipment. Tests and measurements. Part 16-18. Mechanical tests on contacts and terminations. Test 16r. Deflection of male contacts in a connector insert by simulation


05/30140324 DC

EN ISO 12944-5 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 5. Protective paint systems

STI/27Comments for the above document are required by 31 December, 2005

05/30140331 DC

EN 15372 Furniture. Strength, durability and safety. Requirements for non-domestic tables

FW/0

05/30140334 DC

EN 15373 Furniture. Strength, durability and safety. Requirements for non-domestic seating

FW/0

05/30140352 DC

EN 15368 Hydraulic binder for construction. Definition, specifications and conformity criteria

B/516/14

05/30140361 DC

IEC 62337 Milestones and activities during commissioning of electrical, instrumentation and control systems in the process industry

GEL/65

05/30140365 DC

IEC 62381 Activities during the factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) for automation systems in the process industry

GEL/65

05/30140369 DC

IEC 62382 Electrical and instrumentation loop check

GEL/65

05/30140376 DC

BS 5306-1 Fire extinguishing installations and equipment on premises. Part 1. Hose reels and foam inlets

FSH/14Comments for the above document are required by 30 December, 2005


05/30140396 DC

ISO 23041 Space systems. Unmanned spacecraft operational procedures. Documentation

ACE/68

05/30140399 DC

BS ISO 21308-3 Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP). Part 3. General, mass and administrative exchange parameters

AUE/9

05/30140401 DC

ISO/IEC 8802-11 AMD 6 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Part 11. Wireless LAN medium access control (MAC) and physical layer (PHY) specificatio£18.00 members£36.00 non-members

IST/6

05/30140402 DC

ISO/IEC 8802-11 AMD 7 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Part 11. Wireless LAN medium access control (MAC) and physical layer (PHY) specificatio£18.00 members£36.00 non-members

IST/6

05/30140408 DC

EN ISO 11890-1 Paints and varnishes. Determination of volatile organic compound (VOC) content. Part 1. Difference method

STI/10

05/30140412 DC

EN ISO 15181-1 Paints and varnishes. Determination of release rate of biocides from antifouling paints. Part 1. General method for extraction of biocides

STI/10

05/30140416 DC

EN ISO 15181-2 Paints and varnishes. Determination of release rate of biocides from antifouling paints. Part 2. Determination of copper-ion concentration in the extract and calculation of the release rate

STI/10

05/30140420 DC

EN 15341 Maintenance. Maintenance key performance indicators

DS/1

05/30140426 DC

IEC 60335-2-13 AMD 2 Household and similar electrical appliances. Safety. Part 2-13. Particular requirements for deep fat fryers, frying pans and similar appliances

CPL/61/07

05/30140430 DC

IEC 60335-2-74 AMD 1 Household and similar electrical appliances. Safety. Part 2-74. Particular requirements for portable immersion heaters

CPL/61/07

05/30140434 DC

IEC 60335-2-81 AMD 1 Household and similar electrical appliances. Safety. Part 2-81. Particular requirements for foot warmers and heating mats

CPL/61/07

05/30140438 DC

IEC 60335-2-27 AMD 2 Household and similar electrical appliances. Safety. Part 2-27. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

CPL/61/01

05/30140442 DC

ISO 5077 Textiles. Determination of dimensional change in washing and drying

TCI/82

05/30140469 DC

EN 3475-418 Aerospace series. Cables electrical aircraft use. Test methods. Part 418. Thermal endurance for conductors


05/30140483 DC

IEC 61298-1 ED 2 Process measurement and control. General methods and procedures for evaluating performance. Part 1. General considerations

GEL/65/2

05/30140487 DC

IEC 61298-2 ED 2 Process measurement and control. General methods and procedures for evaluating performance. Part 2. Tests reference conditions

GEL/65/2

05/30140491 DC

IEC 61298-3 ED 2 Process measurement and control. General methods and procedures for evaluating performance. Part 3. Tests for the effects of influence quantities

GEL/65/2

05/30140495 DC

IEC 61298-4 ED 2 Process measurement and control. General methods and procedures for evaluating performance. Part 4. Evaluation report content

GEL/65/2

05/30140533 DC

EN ISO 9346 Parallel enquiry. Hygrothermal performance of buildings and building materials. Mass transfer. Physical quantities and definitions

B/540Comments for the above document are required by 31 December, 2005

05/30140539 DC

EN 14534/prA1 Postal services. Quality of service. Measurement of the transit time of end-to-end services for bulk mail

SVS/4

05/30140616 DC

BS EN 15366 Winter and road service area maintenance equipment. Solid absorbents intended for road usage

AGE/32

05/30140619 DC

EN 15378 Heating systems in buildings. Inspection of boilers and heating systems

RHE/24


05/30140622 DC

EN 15377-1 Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Part 1. Determination of the design heating and cooling capacity

RHE/24

05/30140625 DC

EN 15377-2 Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Part 2. Design, dimensioning and installation

RHE/24

05/30140628 DC

EN 15377-3 Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Part 3. Optimizing for use of renewable energy sources

RHE/24

05/30140632 DC

IEC 60598-2-22 AMD 2 Luminaires. Part 2-22. Particular requirements. Luminaires for emergency lighting. Fragment 2

CPL/34/4

05/30140638 DC

ISO 16110-1 Hydrogen generators using fuel processing technologies. Part 1. Safety

PVE/3/7

05/30140648 DC

ISO 8437 Snowthrowers. Safety requirements and test procedures

AGE/20

05/30140651 DC

ISO 6534 Forestry machinery. Portable chain-saw hand guards. Mechanical strength

AGE/29

05/30140679 DC

BS EN 12591 Bitumen and bituminous binders. Specifications for paving grade bitumens

B/510/19

05/30140691 DC

ISO 18916 Imaging materials. Processed imaging materials. Photographic activity test for enclosure materials

CPW/42

05/30140787 DC

EN 10302 Creep resisting steels, nickel and cobalt alloys

ISE/30

05/30140799 DC

ISO 1438-1 Hydrometry. Part 1. Open channel flow measurement using thin-plate weirs

CPI/113/2

05/30140803 DC

EN 3745-601 Aerospace series. Fibres and cables, optical aircraft use. Test methods. Part 601. Smoke density


05/30140851 DC

IEC 61196-1-212 Coaxial communication cables. Environmental test methods. Part 1-212. UV resistance

EPL/46

05/30140853 DC

IEC 61196-1-205 Coaxial communication cables. Environmental test methods. Part 1-205. Resistance to solvents and contaminating fluids

EPL/46

05/30140855 DC

IEC 61196-1-313 Coaxial communication cables. Mechanical test methods. Part 1-313. Adhesion of dielectric and sheath

EPL/46

05/30140924 DC

IEC 62324 TR Single-mode optical fibres. Raman gain efficiency measurement using continuous wave method. Guidance

GEL/86/1

05/30140928 DC

EN 15631 Determination of the influence of the corrosion protection on the anchorage capacity of the transverse anchorage bars

B/523

05/30140931 DC

ISO 10972-5 Cranes. Requirements for mechanisms. Part 5. Bridge and gantry cranes

MHE/3/3

05/30140937 DC

ISO 10414-1 Petroleum and natural gas industries. Field testing of drilling fluids. Part 1. Water-based fluids

PSE/17/-/3

05/30140959 DC

ISO 22986 Cranes. Stiffness. Bridge and gantry cranes

MHE/3/3

05/30140976 DC

EN 15316-2-1 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 2-1. Space heating emission systems

RHE/24

05/30140979 DC

EN 15316-2-3 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 2-3. Space heating distribution systems

RHE/24

05/30140983 DC

EN 15316-4-1 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-1. Space heating generation systems, combustion systems

RHE/24

05/30140986 DC

EN 15316-4-2 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-2. Space heating generation systems, heat pump systems

RHE/24

05/30140990 DC

EN 15316-4-3 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-3. Space heating generation systems, thermal solar systems

RHE/24


05/30140993 DC

EN 15316-4-4 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-4. Space heating generation systems, the performance and quality of CHP electricity and heat

RHE/24

05/30140996 DC

EN 15316-4-5 161. Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-5. Space heating generation systems, the performance and quality of district heating and large volume systems

RHE/24

05/30140999 DC

EN 15316-4-6 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-6. Space heating generation systems, the performance of other renewables heat and electricity

RHE/24

05/30141013 DC

IEC 60974-3 ED 2 Arc welding equipment. Part 3. Arc striking and stabilizing devices

WEE/6Comments for the above document are required by 31 December, 2005

05/30141018 DC

IEC 60317-28 AMD 2 Specifications for particular types of winding wires. Part 28. Polyesterimide enamelled rectangular copper wire, class 180

GEL/55Comments for the above document are required by 31 December, 2005

05/30141026 DC

ISO 17123-8 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 8. GNSS field measurement systems in real-time kinematic (RTK)

CPW/172/6

05/30141031 DC

IEC 62446 Grid connected photovoltaic systems. Minimum system documentation, commissioning tests and inspection

GEL/82

05/30141036 DC

IEC 60371-3-9 AMD 1 Insulating materials based on mica. Part 3-9. Specifications for individual materials. Moulding micanite

GEL/15/3/11

05/30141040 DC

IEC 60371-3-8 AMD 1 Insulating materials based on mica. Part 3-8. Specifications for individual materials. Mica paper tapes for flame-resistant security cables

GEL/15/3/11

05/30141067 DC

ISO 15906 Carbonaceous materials for the production of aluminium. Baked anodes. Determination of the air permeability

B/540/8

05/30141093 DC

EN 4620 Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Design standard

ACE/12

05/30141096 DC

BS EN 4622 Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated

ACE/12

05/30141100 DC

EN 4622 Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2

ACE/12

05/30141104 DC

BS EN 4623 Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy Ni-P100HT (Inconel 718), silver plating

ACE/12

05/30141105 DC

EN 4624 Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy Ni-P101HT (WASPALOY), silver plating


05/30141113 DC

EN 50463 Railway applications. Energy measurement on board trains

GEL/9

05/30141122 DC

ISO 15745-5 Industrial automation systems and integration. Open systems application integration framework. Part 5. Reference description for HDLC-based control systems

AMT/5

05/30141138 DC

IEC 61196-318 Coaxial communication cables. Mechanical test methods. Part 1-318. Heat performance tests

EPL/46

05/30141140 DC

IEC 61196-325 Coaxial communication cables. Mechanical test methods. Part 1-325. Aeolian vibration

EPL/46

05/30141146 DC

IEC 61161 ED 2 Ultrasonics. Power measurement. Radiation force balances and performance requirements up to 1 W in the frequency range 0,5 MHz to 25 MHz and up to 20 W in the frequency range 0,75 MHz to 5 MHz

EPL/87

05/30141152 DC

ISO 10303-111 Industrial automation systems and integration. Product data representation and exchange. Part 111. Integrated application resource. Elements for the procedural modelling of solid shapes

AMT/4


05/30141154 DC

ISO 10303-112 Industrial automation systems and integration. Product data representation and exchange. Part 112. Integrated application resource. Modelling commands for the exchange of procedurally represented 2D CAD models

AMT/4

05/30141195 DC

IEC 60076-15 Power transformers. Part 15. Gas-filled type power transformers

PEL/14

05/30141225 DC

ISO/IEC 26300 Open document format for office applications (OpenDocument) v1.0£40.00 members£80.00 non-members

IST/41

05/30141657 DC

EN 15270 Pellet burners for small heating boilers. Definitions, requirements, testing, marking

RHE/10Comments for the above document are required by 15 December, 2005

DOCUMENTS NOT ISSUED AS DPCsBS EN 1337:-Structural bearings

BS EN 1337-2Sliding elements

This revised British Standard is set to replace the 2001 edition. If you have any views regarding the standard, please submit them to the committee secretary (below) and these may be considered for future proposals for amendment.Contact: David FisherEmail: [email protected]

B/522

BS EN 1993:-

Eurocode 3. Design of steel structures

BS EN 1993-3:-Towers masts and chimneys

BS EN 1993-3-1Towers and masts

This British Standard is soon to be published. If you have any views on it please submit them to the Secretary and these may be considered for future proposals for amendment.Contact: David FisherEmail: [email protected]

B/525/32

BS EN 1993-3-2Chimneys

This British Standard is soon to be published. If you have any views on it please submit them to the Secretary and these may be considered for future proposals for amendment.Contact: David FisherEmail: [email protected]

B/525/32

prEN 2235

Aerospace series. Single and multicore electrical cables, screened and jacketed

This document has been issued as a Final Draft. To view a copy, please contact the committee secretary (below).Contact: Tracey WilkinsEmail: [email protected]

ACE/6/-/3

EN 2335:2005

Specification for bearings, spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads

The final voting text for this standard was approved by the UK and the other CEN members.The standard will shortly be published as BS EN 2335:2005, superseding BS EN 2335:1990.Contact: Sheeba MukadamEmail: [email protected]

ACE/1

prEN 2569

Aerospace series. Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods. Dimensions


ACE/6/-/3

prEN 2588

Aerospace series. Bearings, spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads

This document has now been issued as a Final Draft. To view the drafts, please contact the committee secretary (below).Contact: Sheeba MukadamEmail: [email protected]

ACE/12

prEN 2607

Aerospace series. O-rings for adapters, threaded, with lockring. Survey

This document has now been issued as a Final Draft. To view a copy, please contact the committee secretary (below).Contact: Sue BardenEmail: [email protected]

ACE/12

prEN 2713:-

Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55$0DC and 200$0DC

prEN 2713-002Screened and jacketed. General


ACE/6/-/3

prEN 3155:-

Aerospace series. Electrical contacts used in elements of connection

prEN 3155-004

Contacts, electrical, male, type A, crimp, class T. Product standard


ACE/6/-/3

of 75DOCUMENTS NOT ISSUED AS DPCs

prEN 3155-005

Contacts, electrical, female, type A, crimp, class T. Product standard


ACE/6/-/3

prEN 3155-022

Contacts, electrical rectangular, male, type A, crimp, class R. Product standard


ACE/6/-/3

prEN 3155-023

Contacts, electrical rectangular, female, type A, crimp, class R. Product standard


ACE/6/-/3

prEN 3155-026

Contacts, electrical, male, type A, crimp, class R. Product standard


ACE/6/-/3

prEN 3155-027

Contacts, electrical, female, type A, crimp, class R. Product standard


ACE/6/-/3

prEN 3155-042

Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P. Product standard


ACE/6/-/3

prEN 3155-043

Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P. Product standard


ACE/6/-/3

prEN 3155-052

Contacts, electrical, male 052, type A, crimp, class S. Product standard


ACE/6/-/3

prEN 3155-053

Contacts, electrical, female 053, type A, crimp, class S. Product standard


ACE/6/-/3

prEN 3475:-

Aerospace series. Cable, electrical, aircraft use. Test methods

prEN 3475-302Voltage proof test


ACE/6/-/2

prEN 4173

Aerospace series. Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1 100 MPa (at ambient temperature) / 315$0DC

This document has now been issued as a Final Draft. To view the draft, please contact the committee secretary (below)Contact: Sheeba MukadamEmail: [email protected]

ACE/12

prEN 4174

Aerospace series. Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series

This document has now been issued as a Final Draft. To view the draft, please contact the committee secretary (below)Contact: Sheeba MukadamEmail: [email protected]

ACE/12

prEN 4176

Aerospace series. Lockbolts, 100$0D countersunk normal head or protruding head, tension-/sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy 2024. Metric s

The final voting text for this Draft European Standard has been approved by the UK and the other CEN members.It will be published in the UK as BS EN 4176:2005.Contact: Sheeba MukadamEmail: [email protected]

ACE/12

of 75DOCUMENTS NOT ISSUED AS DPCs

prEN 62311

Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)

This Draft European Standard will shortly be prepared for publication. Please submit any comments to the committee secretary (below).Contact: Simon MerrimanEmail: [email protected]

GEL/106

ISO/DIS 9197

Paper, board and pulps. Determination of water-soluble chlorides

This document has now been issued as a Final Draft. To view it, please contact the committee secretary (below).Contact: Sue BardenEmail: [email protected]

PAI/11

ISO/DIS 9874

Milk. Determination of total phosphorus content. Method using molecular absorption spectrometry

This document, which constitutes only a minor revision of the original 1992 standard, has been circulated to ISO members as a final draft by ISO/TC34/SC 5. Copies of the text are available from the contact point (below).Contact: Committee Service CentreEmail: [email protected]

AW/5

ISO/DIS 10364

Structural adhesives. Determination of the pot life (working life) of multi-component adhesives

This Draft International Standard is based on EN 14022, which was implemented by BSI as BS EN 14022:2003. Copies are available from the contact point (below).Contact: Committee Service CentreEmail: [email protected]

PRI/52

CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE

prEN 517

Prefabricated accessories for roofing. Roof safety hooks

The above document has been circulated to CEN members for voting. It will not be issued as a Draft for Public Comment. Copies may be obtained from the committee secretary (below), to whom comments should be submitted by 30 December, 2005.Contact: Douglas JordanEmail: [email protected]

B/542

prEN 646

Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board

The text of this draft standard has been circulated for approval to publish. Copies are available on request from the committee secretary (below).Contact: Sue BardenEmail: [email protected]

PAI/11

prEN 13329

Laminate floor coverings. Elements with a surface layer based on aminoplastic thermosetting resins. Specifications, requirements and test methods

This Final Draft revision has recently been circulated to committee PRI/60. Further information is available from the committee secretary (below).Contact: Ranjit BhambraEmail: [email protected]

PRI/60

prEN ISO 13769Gas cylinders. Stamp marking

This revision, which has not been issued as a Draft for Public Comment, is identical to ISO 3769:2002. It will supersede BS EN 1089-1:1997, which will be withdrawn when EN ISO 13769 is approved. Please submit any comments to the committee secretary (belowContact: Sarah HorsfieldEmail: [email protected]

PVE/3/7

prEN 14488:-Testing sprayed concrete

prEN 14488-3

Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

The text of this Draft European Standard has been circulated for approval to publish by December 2005. Copies are available on request under document reference B/517/10.0010/05. The closing date for approval is 12 December, 2005.Contact: Ray KerriganEmail: [email protected]

B/517/10

prEN 14488-5

Determination of energy absorption capacity of fibre reinforced slab specimens


B/517/10

prEN 14488-7

Fibre content of fibre reinforced concrete


B/517/10

EN 15380:-

Railway applications. Designation system for railway vehicles

EN 15380-1General principles

The UK voted "NO" at the PQ ballot pertaining to this document, which has been circulated by CEN TC 256. Please submit any comments to the committee secretary (below) by no later than B>1 January, 2006.Contact: Keith SeydeEmail: [email protected]

RAE/1

of 75CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE

EN 15380-2Product groups


RAE/1

EN 15380-3

Designation of installation sites and locations


RAE/1

CEN EUROPEAN STANDARDSEN 71:-Safety of toys

EN 71-1:2005Mechanical and physical properties


CW/15

EN 74:-

Couplers, spigot pins and baseplates for use in falsework and scaffolds

EN 74-1:2005

Couplers for tubes. Requirements and test procedures£100.70 members£106.00 non-members

B/514/21

EN 203:-Gas heated catering equipment

EN 203-2:-Specific requirements

EN 203-2-1:2005Open burners and wok burners


GSE/19

EN 203-2-3:2005Boiling pans


GSE/19

EN 203-2-4:2005Fryers


GSE/19

EN 203-2-6:2005Hot water heaters for beverage


GSE/19

EN 203-2-8:2005Brat pans and paëlla


GSE/19

EN 203-2-9:2005

Solid tops, warming plates and griddles£49.40 members£52.00 non-members

GSE/19

EN 286:-

Simple unfired pressure vessels designed to contain air or nitrogen

EN 286-1:-

Pressure vessels for general purposesAMENDMENT 2:October 2005to EN 286-1:1998


PVE/1

EN 352:-

Hearing protectors. Safety requirements and testing

EN 352-4:-Level-dependent ear-muffs

AMENDMENT 1:October 2005to EN 352-4:2001


PH/7

EN 473:-

Non-destructive testing. Qualification and certification of NDT personnel. General principlesAMENDMENT 1:October 2005to EN 473:2000


WEE/46

EN 480:-

Admixtures for concrete, mortar and grout. Test methods

EN 480-4:2005

Determination of bleeding of concrete£49.40 members£52.00 non-members

B/517/3

EN 480-12:2005

Determination of the alkali content of admixtures£49.40 members£52.00 non-members

B/517/3

EN 771:-Specification for masonry units

EN 771-6:2005Natural stone masonry units


B/519

EN 923:2005Adhesives. Terms and definitions


PRI/52

EN 933:-

Tests for geometrical properties of aggregates

EN 933-1:-

Determination of particle size distribution. Sieving methodAMENDMENT 1:October 2005to EN 933-1:1997


B/502/6

EN 1047:-Secure storage units

of 75CEN EUROPEAN STANDARDS

EN 1047-1:2005Data cabinets and diskette inserts


GW/2

EN 1097:-

Tests for mechanical and physical properties of aggregates

EN 1097-6:-

Determination of particle density and water absorptionAMENDMENT 1:October 2005to EN 1097-6:2000


B/502/6

EN 1146:2005

Respiratory protective devices. Self contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking£87.40 members£92.00 non-members

PH/4

EN 1270:2005

Playing field equipment. Basketball equipment. Functional and safety requirements, test methods£60.80 members£64.00 non-members

SW/136

EN 1439:2005

LPG equipment and accessories. Transportable refillable welded and brazed steel liquefied petroleum gas (LPG) cylinders. Procedure for checking before, during and after filling£60.80 members£64.00 non-members

PVE/19

EN 1545:-

Identification card systems. Surface transport applications

EN 1545-1:2005

Elementary data types, general code lists and general data elements£133.00 members£140.00 non-members

IST/17

EN 1545-2:2005

Transport and travel payment related data elements and code lists£114.00 members£120.00 non-members

IST/17

EN 1930:-

Child care articles. Safety barriers. Safety requirements and test methodsAMENDMENT 1:October 2005to EN 1930:2000


CW/41

EN 1968:-

Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylindersAMENDMENT 1:October 2005to EN 1968:2002


PVE/3/7

EN 1992:-

Eurocode 2: Design of concrete structures

EN 1992-2:2005Concrete bridges


B/525/2

EN 1994:-

Eurocode 4: Design of composite steel and concrete structures

EN 1994-2:2005General rules and rules for bridges


B/525/4

EN 2072:2005

Aerospace series. Aluminium AL-P1050A. H14. Sheet & strip 0,4 mm $3L a $3L 6 mm£49.40 members£52.00 non-members

ACE/61/-/24

EN 2087:2005

Aerospace series. Aluminium AL-P2014A. T6 or T62. Clad sheet & strip. 0,4 mm $3L a $3L 6 mm£49.40 members£52.00 non-members

ACE/61/-/24

EN 2243:-

Aerospace series. Non-metallic materials. Test method

EN 2243-2:2005Peel metal-metal


ACE/65/-/63

EN 2243-4:2005

Metal-honeycomb core flatwise test piece£49.40 members£52.00 non-members

ACE/65/-/63

EN 2243-5:2005Ageing tests


ACE/65/-/63

EN 2243-6:2005

Determination of shear stress and shear strain£60.80 members£64.00 non-members

ACE/65/-/63

EN 2591:-

Aerospace series. Elements of electrical and optical connection

EN 2591-609:2005

Test methods. Effectiveness of cable attachment. cable cyclic flexing£49.40 members£52.00 non-members

ACE/6/-/3

EN 2635:2005

Aerospace series. Aluminium alloy AL-P2014A. T6511. Extruded bar and section. a or D $3L 200 mm with peripheral coarse grain control£49.40 members£52.00 non-members

ACE/61/-/24

EN 2702:2005

Aerospace series. Aluminium alloy AL-P6061. T6 or T62. Drawn or extruded bar and section. a or D $3L 200mm£49.40 members£52.00 non-members

ACE/61/-/24


EN 2853:2005

Aerospace series. Current ratings for electrical cables with conductor EN 2083£49.40 members£52.00 non-members

ACE/6/-/2

EN 3155:-

Aerospace series. Electrical contacts used in elements of connection

EN 3155-003:2005

Contacts, electrical, female, type A, crimp, class S. Product standard£49.40 members£52.00 non-members

ACE/6/-/3

EN 3338:2005

Aerospace series. Aluminium alloy AL-P7050. T74511. Extruded bar and section. a or D $3L 150 mm with peripheral coarse grain control£49.40 members£52.00 non-members

ACE/61/-/24

EN 3342:2005

Aerospace series. Aluminium alloy AL-P6061. T4 or T42. Drawn or extruded bar and section. a or D $3L 150 mm£49.40 members£52.00 non-members

ACE/61/-/24

EN 3344:2005


ACE/61/-/24

EN 3347:2005


ACE/61/-/24

EN 3475:-

Aerospace series. Cables, aircraft use. Test methods

EN 3475-306:2005Continuity of conductors


ACE/6/-/2

EN 3475-307:2005Corona extinction voltage


ACE/6/-/2

EN 3475-407:2005Flammability


ACE/6

EN 3475-414:2005

Differential scanning calorimeter (DSC) test£30.40 members£32.00 non-members

ACE/6/-/2

EN 3475-415:2005Rapid change of temperature


ACE/6/-/2

EN 3475-513:2005

Deformation resistance (installation with plastic cable ties)£49.40 members£52.00 non-members

ACE/6/-/2

EN 3475-706:2005Laser markability


ACE/6/-/2

EN 3719:2005

Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard£49.40 members£52.00 non-members

ACE/6/-/2

EN 10246:-

Non destructive testing of steel tubes

EN 10246-7:2005

Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections£49.40 members£52.00 non-members

ISE/73/1

EN 10294:-Hollow steel bars for machining

EN 10294-1:2005

Technical delivery conditions. Non alloy and alloy steels£87.40 members£92.00 non-members

ISE/8

EN 10298:2005

Steel tubes and fittings for onshore and offshore pipelines. Internal lining with cement mortar£87.40 members£92.00 non-members

ISE/16

EN 12042:2005

Food processing machinery. Automatic dividers. Safety and hygiene requirements£114.00 members£120.00 non-members

MCE/3/5

EN 12101:-Smoke and heat control systems

EN 12101-10:2005Power supplies


FSH/25

EN 12385:-Steel wire ropes. Safety

EN 12385-4:-

Stranded ropes for general lifting applicationsCORRIGENDUM 1:October 2005to EN 12385-4:2002

MHE/2

EN 12385-5:-Stranded ropes for lifts

CORRIGENDUM 1:October 2005to EN 12385-5:2002

MHE/2


EN 12757:-

Mixing machinery for coating materials. Safety requirements

EN 12757-1:2005

Mixing machinery for use in vehicle refinishing£87.40 members£92.00 non-members

MCE/3/8

EN 12881:-

Conveyor belts. Fire simulation flammability testing

EN 12881-1:2005Propane burner tests


PRI/67

EN 12900:2005

Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer's performance data£49.40 members£52.00 non-members

RHE/4

EN 12905:2005

Products used for treatment of water intended for human consumption. Expanded aluminosilicate£49.40 members£52.00 non-members

CII/59

EN 12909:2005

Products used for treatment of water intended for human consumption. Anthracite£49.40 members£52.00 non-members

CII/59

EN 12910:2005

Products used for treatment of water intended for human consumption. Garnet£49.40 members£52.00 non-members

CII/59

EN 12912:2005

Products used for treatment of water intended for human consumption. Barite£49.40 members£52.00 non-members

CII/59

EN 12913:2005

Products used for treatment of water intended for human consumption. Powdered diatomaceous earth£49.40 members£52.00 non-members

CII/59

EN 12914:2005

Products used for treatment of water intended for human consumption. Powdered perlite£49.40 members£52.00 non-members

CII/59

EN 13084:-Free-standing industrial chimneys

EN 13084-7:2005

Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel chimney liners£60.80 members£64.00 non-members

B/525/13

EN 13108:-

Bituminous mixtures. Material specifications

EN 13108-8:2005Reclaimed asphalt


B/510/1

EN 13135:-Cranes. Equipment

EN 13135-2:-Non-electrotechnical equipment


MHE/3/1

EN 13157:-

Cranes. Safety. Hand powered lifting equipmentCORRIGENDUM 1:October 2005to EN 13157:2004

MHE/3/6

EN 13288:2005

Food processing machinery. Bowl lifting and tilting machines. Safety and hygiene requirements£100.70 members£106.00 non-members

MCE/3/5

EN 13384:-

Chimneys. Thermal and fluid dynamic calculation methods

EN 13384-3:2005

Methods for the development of diagrams and tables for chimneys serving one heating appliance£87.40 members£92.00 non-members

B/506

EN 13389:2005

Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements£100.70 members£106.00 non-members

MCE/3/5

EN 13411:-

Terminations for steel wire ropes. Safety

EN 13411-3:-Ferrules and ferrule-securing


MHE/2

EN 13557:-

Cranes. Control and control stationsAMENDMENT 1:October 2005to EN 13557:2003


MHE/3

EN 13591:2005

Food processing machinery. Fixed deck oven loaders. Safety and hygiene requirements£100.70 members£106.00 non-members

MCE/3/5

EN 13954:2005

Food processing machinery. Bread slicers. Safety and hygiene requirements£114.00 members£120.00 non-members

MCE/3/5

EN 14017:2005

Agricultural and forestry machinery. Solid fertilizer distributors. Safety£87.40 members£92.00 non-members

AGE/32


EN 14018:2005

Agricultural and forestry machinery. Seed drills. Safety£87.40 members£92.00 non-members

AGE/32

EN 14023:2005

Bitumen and bituminous binders. Framework specification for polymer modified bitumens£87.40 members£92.00 non-members

B/510/19

EN 14044:2005

High rise aerial appliances for fire service use. Turntable ladders with sequential movements. Safety and performance requirements£133.00 members£140.00 non-members

FSH/17/4

EN 14049:-

Irrigation techniques. Water application intensity. Calculation principles and measurement methodsAMENDMENT 1:October 2005to EN 14049:2003


AGE/30

EN 14373:2005Explosion suppression systems


FSH/23

EN 14444:2005

Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test£49.40 members£52.00 non-members

PRI/52

EN 14529:2005

Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only£87.40 members£92.00 non-members

PH/4

EN 14628:2005

Ductile iron pipes, fittings and accessories. External polythene coating for pipes in highly aggressive soils. Requirements and test methods£60.80 members£64.00 non-members

PSE/10

EN 14647:2005

Calcium aluminate cement. Composition, specifications and conformity criteria£100.70 members£106.00 non-members

B/516/6

EN 14713:2005

Adhesives for paper and board and packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding£49.40 members£52.00 non-members

PRI/52

EN 14743:2005

Water conditioning equipment inside buildings. Softeners. Requirements for performance and safety, testing£60.80 members£64.00 non-members

B/504/13

EN 14755:2005

Extruded particleboards. Specifications£49.40 members£52.00 non-members

B/541

EN 14769:2005

Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a pressure ageing vessel (PAV)£49.40 members£52.00 non-members

PTI/13

EN 14770:2005

Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic shear rheometer (DSR)£49.40 members£52.00 non-members

PTI/13

EN 14794:2005

LPG equipment and accessories. Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG) procedure for checking before, during and after filling£49.40 members£52.00 non-members

PVE/19

EN 14798:2005

Glass packaging. Hand-held crown bottle openers. Dimensions£49.40 members£52.00 non-members

PKW/0

EN 14812:2005

Water conditioning equipment inside buildings. Chemical dosing systems. Requirements for performance and safety testing£60.80 members£64.00 non-members

B/504/13

EN 14822:-

Health informatics. General purpose information components

EN 14822-1:2005Overview


IST/35

EN 14822-2:2005Non-clinical


IST/35

EN 14822-3:2005Clinical


IST/35

EN 14840:2005

Joint fillers and sealants. Test methods for preformed joint seals£49.40 members£52.00 non-members

B/510/3

EN 14908:-

Open data communication in building automation, controls and building management. Building network protocol


EN 14908-2:2005Twisted pair communication


RHE/16

EN 15017:2005Funeral services. Requirements


FSW/1

CEN REPORTS

CEN/TR 1071:-

Advanced technical ceramics. Methods of test for ceramic coatings

CEN/TR 1071-11:2005

Determination of internal stress by the Stoney formula£49.40 members£52.00 non-members

RPI/13

CEN/TR 12101:-Smoke and heat control systems

CEN/TR 12101-5:2005

Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation systems£133.00 members£140.00 non-members

FSH/25

CEN/TR 14489:2005

Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection of the protection of safety, health and the environment£100.70 members£106.00 non-members

MCE/18/-/16

CEN/TR 15134:2005

Non-destructive testing. Automated ultrasonic examination. Selection and application of systems£87.40 members£92.00 non-members

WEE/46

CEN/TR 15235:2005

Welding. Methods for assessing imperfections in metallic structures£49.40 members£52.00 non-members

WEE/37

CEN ISO/TR 15608:2005(ISO/TR 15608:2005)

Welding. Guidelines for a metallic materials grouping system

WEE/36

CENELEC PUBLICATIONS

EN 529:2005

Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document£114.00 members£120.00 non-members

PH/4

EN 692:2005

Machine tools. Mechanical presses. Safety£133.00 members£140.00 non-members

MTE/1

EN 50288:-

Multi-element metallic cables used in analogue and digital communication and control

EN 50288-7:2005

Sectional specification for instrumentation and control cables£60.80 members£64.00 non-members

EPL/46

EN 50389:2005

Space product assurance. Wire-wrapping of high reliability electrical connections£87.40 members£92.00 non-members

GEL/107

EN 50412:-

Powerline communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz

EN 50412-2-1:2005

Residential, commercial and industrial environment. Immunity requirements£60.80 members£64.00 non-members

PEL/205

EN 60216:-

Electrical insulating materials. Thermal endurance properties

EN 60216-2:2005(IEC 60216-2:2005 )

Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria

GEL/15/5

EN 60376:2005(IEC 60376:2005)

Specification of technical grade SF6 for use in electrical equipment

GEL/10

EN 60432:-

Incandescent lamps. Safety specifications

EN 60432-2:-(IEC 60432-2:1999/A1:2005 MODIFIED)Tungsten halogen lamps for domestic and similar general lighting purposesAMENDMENT 1:October 2005to EN 60432-2:2000

CPL/34/1

EN 60519:-Safety in electroheat installations

EN 60519-8:2005(IEC 60519-8:2005)

Particular requirements for electroslag remelting furnaces

PEL/27

EN 60567:2005(IEC 60567:2005)

Oil filled electrical equipment. Sampling of gases and of oil for analysis of free and dissolved gases. Guidance

GEL/10

EN 60598:-Luminaires

EN 60598-2:-Particular requirements

of 75CENELEC PUBLICATIONS

EN 60598-2-10:2005(IEC 60598-2-10:2005)Portable luminaires for children

CPL/34/4

EN 60598-2-11:2005(IEC 60598-2-11:2005)Aquarium luminaires

CPL/34/4

EN 60704:-

Household and similar electrical appliances. Test code for the determination of airborne acoustical noise

EN 60704-2-5:2005(IEC 607040205:2005)

Particular requirements for electric thermal storage room heaters

CPL/59/3

EN 60740:-

Laminations for transformers and inductors

EN 60740-1:2005(IEC 60740-1:2005)

Mechanical and electrical characteristics

EPL/51

EN 61300:-

Fibre optic interconnecting devices and passive components

EN 61300-2-19:2005(IEC 61300-2-19:2005)

Basic test and measurement procedures. Tests. Damp heat (steady state)

GEL/86/2

EN 61754:-Fibre optic connector interfaces

EN 61754-22:2005(IEC 61754-22:2005)Type F-SMA connector family

GEL/86/2

EN 62086:-

Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating

EN 62086-1:2005(IEC 62086-1:2001)General and testing requirements

GEL/31

EN 62086-2:2005(IEC 62086-2:2001)

Application guide for design, installation and maintenance

GEL/31

EN 62328:-

Multimedia home server systems. Interchangeable volume/file structure adaptation for broadcasting receivers

EN 62328-1:2005(IEC 62328-1:2005)

General description and architecture

EPL/100

EN 62328-2:2005(IEC 62328-2:2005)General recording structure

EPL/100

EN 62359:2005(IEC 62359:2005)

Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields

EPL/87

CEN TECHNICAL SPECIFICATIONSCEN/TS 14383:-

Prevention of crime. Urban planning and building design

CEN/TS 14383-3:2005Dwellings


B/209/10

CEN/TS 14416:2005

Geosynthetic barriers. Test method for determining the resistance to roots£49.40 members£52.00 non-members

B/553

CEN/TS 14429:2005

Characterisation of waste. Leaching behaviour tests. influence of pH on leaching with initial acid/base addition£49.40 members£52.00 non-members

B/508/3

OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONSEG 201 730:-

Access and Terminals (AT). Access to the public telecommunications networks. Publication of interface specification under Directive 1999/5/EC (R&TTE). Guidelines for the publication of interface specifications

EG 201 730-1: October 2005(Version 2.1.2)General and common aspects

EG 202 057:-

Speech Processing, Transmission and Quality Aspects (STQ). User related QoS parameter definitions and measurements

EG 202 057-1: October 2005(Version 1.2.1)General

EG 202 057-2: October 2005(Version 1.2.1)

Voice telephony, Group 3 fax, modem data services and SMS

EG 202 057-4: October 2005(Version 1.1.1)Internet access

EG 202 320: October 2005(Version 1.2.1)

Human Factors (HF). Duplex Universal Speech and Text (DUST) communications


Human Factors (HF). User Profile Management


Human Factors (HF). Guidelines for the design and deployment of ICT products and services used by children

ES 200 812:-

Terrestrial Trunked Radio (TETRA). Subscriber Identity Module to Mobile Equipment (TSIM-ME) interface

of 75OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS

ES 200 812-2: October 2005(Version 2.4.2)

Universal Integrated Circuit Card (UICC). Characteristics of the TSIM application

ES 201 980: October 2005(Version 2.2.1)

Digital Radio Mondiale (DRM). System Specification

TR 101 830:-

Transmission and Multiplexing (TM). Access networks. Spectral management on metallic access networks

TR 101 830-2: October 2005(Version 1.1.1)

Technical methods for performance evaluations

TR 121 900: September 2005(Version 7.1.0)

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Technical Specification Group working methods (3GPP TR 21.900 version 7.1.0 Release 7)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Vocabulary for 3GPP Specifications (3GPP TR 21.905 version 5.10.0 Release 5)


(3GPP TR 21.905 version 6.10.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Priority service guide (3GPP TR 22.952 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Interworking aspects and migration scenarios for IPv4-based IP Multimedia Subsystem (IMS) implementations (3GPP TR 23.981 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Iub/Iur congestion control (3GPP TR 25.902 version 6.0.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Guidelines and principles for protocol description and error handling (3GPP TR 25.921 version 6.1.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Radio resource management strategies (3GPP TR 25.922 version 6.2.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Typical examples of Radio Access Bearers (RABs) and Radio Bearers (RBs) supported by Universal Terrestrial Radio Access (UTRA) (3GPP TR 25.993 version 6.11.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Signalling interworking between the 3GPP profile of the Session Initiation Protocol (SIP) and non-3GPP SIP usage (3GPP TR 29.962 version 6.1.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Security aspects of early IP Multimedia Subsystem (IMS) (3GPP TR 33.978 version 6.2.0 Release 6)

TR 134 943: October 2005(Version 5.0.0)

Universal Mobile Telecommunications System (UMTS). Analysis of difference between FDD and 1.28 Mcps TDD and corresponding effect on terminal conformance test in radio access stratum protocol aspects (3GPP TR 34.943 version 5.0.0 Release 5)

TS 100 607:-

Digital cellular telecommunications system (Phase 2+). Mobile Station (MS) conformance specification

TS 100 607-4: October 2005(Version 8.13.0)

Digital cellular telecommunications system (Phase 2+). Mobile Station (MS) conformance specification. Part 4. Subscriber Interface Module (SIM) application toolkit conformance specification (3GPP TS 11.10-4 version 8.13.0 Release 1999)


(3GPP TS 11.10-4 version 8.13.1 Release 1999)

TS 101 270:-

Transmission and Multiplexing (TM). Access transmission systems on metallic access cables. Very high speed Digital Subscriber Line (VDSL)

TS 101 270-1: October 2005(Version 1.4.1)Functional requirements

TS 101 498:-

Digital Audio Broadcasting (DAB). Broadcast website

TS 101 498-3: October 2005(Version 2.1.1)TopNews basic profile specification


TS 101 909:-

Digital Broadband Cable Access to the Public Telecommunications Network. IP Multimedia Time Critical Services

TS 101 909-20:-Lawful Interception

TS 101 909-20-1: October 2005(Version 1.1.2)

CMS based Voice Telephony Services

TS 101 909-20-2: October 2005(Version 1.1.2)Streamed multimedia services

TS 102 221: October 2005(Version 3.17.0)

Smart cards. UICC-Terminal interface. Physical and logical characteristics (Release 1999)

TS 102 221: October 2005(Version 4.15.0)(Release 4)





Integrated Circuit Cards (ICC). Administrative commands for telecommunications applications (Release 1999)





Smart cards. Card Application Toolkit (CAT) (Release 4)





Smart cards. Secured packet structure for UICC based applications (Release 7)


Smart cards. UICC-Terminal interface. Physical, electrical and logical test specification (Release 1999)




Smart cards. UICC Application Programming Interface (UICC API) for Java Card (TM) (Release 6)


TS 102 310: September 2005(Version 6.2.0)

Smart Cards. Extensible Authentication Protocol support in the UICC (Release 6)


Digital Enhanced Cordless Telecommunications (DECT). Cordless multimedia communication system. Open Data Access Profile (ODAP)


Smart Cards. UICC-Terminal interface. Card Application Toolkit (CAT) conformance specification (Release 6)


Digital Video Broadcasting (DVB). DVB-S2 Adaptive Coding and Modulation for Broadband Hybrid Satellite Dialup Applications


Digital Enhanced Cordless Telecommunications (DECT). DECT in the 1 920 MHz to 1 930 MHz Unlicensed Personal Communications Services (UPCS) frequency band. Specific requirements


Universal Mobile Telecommunications System (UMTS). Technical Specifications and Technical Reports for a UTRAN-based 3GPP system (3GPP TS 21.101 version 6.3.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). USIM Application Toolkit (USAT/SAT). Service description. Stage 1 (3GPP TS 22.038 version 6.5.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Customized Applications for Mobile network Enhanced Logic (CAMEL). Service description. Stage 1 (3GPP TS 22.078 version 6.9.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Services and service capabilities (3GPP TS 22.105 version 6.4.0 Release 6)



Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Service aspects. Charging and billing (3GPP TS 22.115 version 6.5.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Service requirements for the Internet Protocol (IP) multimedia core network subsystem (IMS). Stage 1 (3GPP TS 22.228 version 6.10.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Transparent end-to-end packet-switched streamng service. Stage 1 (3GPP TS 22.233 version 6.3.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Speech recognition framework for automated voice services. Stage 1 (3GPP TS 22.243 version 6.4.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Network architecture (3GPP TS 23.002 version 6.9.0 Release 6)

TS 123 003: July 2005(Version 6.7.1)

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Numbering, addressing and identification (3GPP TS 23.003 version 6.7.1 Release 6)


(3GPP TS 23.003 version 6.8.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Organization of subscriber data (3GPP TS 23.008 version 5.9.0 Release 5)




Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Handover procedures (3GPP TS 23.009 version 5.9.0 Release 5)




Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General Packet Radio Service (GPRS). Service description. Stage 2 (3GPP TS 23.060 version 4.10.0 Release 4)






Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Customized Applications for Mobile network Enhanced Logic (CAMEL) Phase X. Stage 2 (3GPP TS 23.078 version 6.7.0 Release 6)

TS 123 125: June 2005(Version 6.5.0)

Universal Mobile Telecommunications System (UMTS). Overall high level functionality and architecture impacts of flow based charging. Stage 2 (3GPP TS 23.125 version 6.5.0 Release 6)




Universal Mobile Telecommunications System (UMTS). Out of band transcoder control. Stage 2 (3GPP TS 23.153 version 4.14.0 Release 4)






Universal Mobile Telecommunications System (UMTS). Bearer-independent circuit-switched core network. Stage 2 (3GPP TS 23.205 version 4.9.0 Release 4)






Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). End-to-end Quality of Service (QoS) concept and architecture (3GPP TS 23.207 version 5.10.0 Release 5)





Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). IP Multimedia Subsystem (IMS). Stage 2 (3GPP TS 23.228 version 5.14.0 Release 5)




Universal Mobile Telecommunications System (UMTS). 3GPP system to Wireles Local Area Network (WLAN) interworking. System description (3GPP TS 23.234 version 6.6.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Intra-domain connection of Radio Access Network (RAN) nodes to multiple Core Network (CN) nodes (3GPP TS 23.236 version 5.4.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Multimedia Broadcast/Multicast Service (MBMS). Architecture and functional description (3GPP TS 23.246 version 6.8.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Network sharing. Architecture and functional description (3GPP TS 23.251 version 6.5.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Functional stage 2 description of Location Services (LCS) (3GPP TS 23.271 version 6.13.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Mobile radio interface signalling layer 3. General Aspects (3GPP TS 24.007 version 6.5.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Mobile radio interface Layer 3 specification. Core network protocols. Stage 3 (3GPP TS 24.008 version 5.14.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Bootstrapping interface (Ub) and network application function interface (Ua). Protocol details (3GPP TS 24.109 version 6.4.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Presence service using the IP Multimedia (IM) Core Network (CN) subsystem. Stage 3 (3GPP TS 24.141 version 6.5.0 Release 6)


Universal Mobile Telecommunications System (UMTS). 3GPP IMS Management Object (MO). Stage 3 (3GPP TS 24.167 version 6.2.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP). Stage 3 (3




Universal Mobile Telecommunications System (UMTS). 3GPP system to Wireless Local Area Network (WLAN) interworking. User Equipment (UE) to network protocols. Stage 3 (3GPP TS 24.234 version 6.4.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Messaging using the IP Multimedia (IM) Core Network (CN) subsystem. Stage 3 (3GPP TS 24.247 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 3.18.0 Release 1999)









Universal Mobile Telecommunications System (UMTS). User Equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 5.8.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 3.13.0 Release 1999)








Universal Mobile Telecommunications System (UMTS). Base station and repeater electromagnetic compatibility (EMC) (3GPP TS 25.113 version 6.2.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Requirements for support of radio resource management (TDD) (3GPP TS 25.123 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Requirements for support of radio resource management (FDD) (3GPP TS 25.133 version 3.22.0 Release 1999)








Universal Mobile Telecommunications System (UMTS). Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 3.14.0 Release 1999)








Universal Mobile Telecommunications System (UMTS). Base Station (BS) conformance testing (TDD) (3GPP TS 25.142 version 4.10.0 Release 4)






Universal Mobile Telecommunications System (UMTS). Requirements for support of Assisted Global Positioning System (A-GPS). Frequency Division Duplex (FDD) (3GPP TS 25.171 version 6.2.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Physical channels and mapping of transport channels onto physical channels (FDD) (3GPP TS 25.211 version 6.6.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Multiplexing and channel coding (FDD) (3GPP TS 25.212 version 6.6.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Spreading and modulation (FDD) (3GPP TS 25.213 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Physical layer procedures (FDD) (3GPP TS 25.214 version 6.7.0 Release 6)



Universal Mobile Telecommunications System (UMTS). Physical layer. Measurements (FDD) (3GPP TS 25.215 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Physical channels and mapping of transport channels onto physical channels (TDD) (3GPP TS 25.221 version 6.5.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Radio interface protocol architecture (3GPP TS 25.301 version 5.6.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Services provided by the physical layer (3GPP TS 25.302 version 5.9.0 Release 5)




Universal Mobile Telecommunications System (UMTS). User Equipment (UE) procedures in idle mode and procedures for cell reselection in connected mode (3GPP TS 25.304 version 5.9.0 Release 5)




Universal Mobile Telecommunications System (UMTS). UE Radio Access capabilities definition (3GPP TS 25.306 version 5.12.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Requirements on User Equipments (Ues) supporting a release-independent frequency band (3GPP TS 25.307 version 3.5.0 Release 1999)








Universal Mobile Telecommunications System (UMTS). FDD enhanced uplink. Overall description. Stage 2 (3GPP TS 25.309 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Medium Access Control (MAC) protocol specification (3GPP TS 25.321 version 5.12.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Radio Link Control (RLC) protocol specification (3GPP TS 25.322 version 5.12.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Packet Data Convergence Protocol (PDCP) specification (3GPP TS 25.323 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Broadcast/Multicast Control (BMC) (3GPP TS 25.324 version 5.6.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Radio Resource Control (RRC) protocol specification (3GPP TS 25.331 version 5.14.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Introduction of the Multimedia Broadcast/Multicast Service (MBMS) in the Radio Access Network (RAN). Stage 2 (3GPP TS 25.346 version 6.6.0 Release 6)



Universal Mobile Telecommunications System (UMTS). UTRAN overall description (3GPP TS 25.401 version 6.7.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iu interface. General aspects and principles (3GPP TS 25.410 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iu interface Radio Access Network Application Part (RANAP) signalling (3GPP TS 25.413 version 6.7.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iur interface Radio Network Subsystem Application Part (RNSAP) signalling (3GPP TS 25.423 version 5.15.0 Release 5)




Universal Mobile Telecommunications System (UMTS). UTRAN Iur interface data transport and transport signalling for Common Transport Channel data streams (3GPP TS 25.424 version 5.6.0 Release 5)




Universal Mobile Telecommunications System (UMTS). UTRAN Iur interface user plane protocols for Common Transport Channel data streams (3GPP TS 25.425 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iur/Iub interface user plane protocol for DCH data streams (3GPP TS 25.427 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iub interface Node B Application Part (NBAP) signalling (3GPP TS 25.433 version 6.7.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iub interface user plane protocols for Common Transport Channel data streams (3GPP TS 25.435 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iupc interface general aspects and principles (3GPP TS 25.450 version 6.2.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iuant interface. Layer 1 (3GPP TS 25.461 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iuant interface. Signalling transport (3GPP TS 25.462 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UTRAN Iuant interface. Remote Electrical Tilting (RET) antennas Application Part (RETAP) signalling (3GPP TS 25.463 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Transparent end-to-end Packet-switched Streaming Service (PSS). Protocols and codecs (3GPP TS 26.234 version 6.5.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Packet switched conversational multimedia applications. Transport protocols (3GPP TS 26.236 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Transparent end-to-end packet switched streaming service (PSS). 3GPP file format (3GP) (3GPP TS 26.244 version 6.4.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). ANSI-C code for the fixed-point Extended Adaptive Multi-Rate. Wideband (AMR-WB+) speech codec (3GPP TS 26.273 version 6.2.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Speech codec speech processing functions. Extended Adaptive Multi-Rate. Wideband (AMR-WB+) speech codec. Conformance testing (3GPP TS 26.274 version



Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Extended Adaptive Multi-Rate. Wideband (AMR-WB+) codec. Floating-point ANSI-C code (3GPP TS 26.304 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Multimedia Broadcast/Multicast Service (MBMS). Protocols and codecs (3GPP TS 26.346 version 6.2.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General audio codec audio processing functions. Enhanced aacPlus general audio codec. Additional decoder tools (3GPP TS 26.402 version 6.1.0 Release


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General audio codec audio processing functions. Enhanced aacPlus general audio codec. Floating-point ANSI-C code (3GPP TS 26.410 version 6.4.0 Releas


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General audio codec audio processing functions. Enhanced aacPlus general audio codec. Fixed-point ANSI-C code (3GPP TS 26.411 version 6.2.0 Release 6


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS) (3GPP TS 27.001 version 6.2.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Mobile Application Part (MAP) specification (3GPP TS 29.002 version 4.16.0 Release 4)






Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switc






Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Information element mapping between Mobile Station. Base Station System (MS. BSS) and Base Station System. Mobile-services Switching Centre (BSS. MSC


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). General Packet Radio Service (GPRS). GPRS Tunnelling Protocol (GTP) across the Gn and Gp interface (3GPP TS 29.060 version 5.14.0 Release 5)




Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Interworking between the Public Land Mobile Network (PLMN) supporting packet based services and Packet Data Networks (PDN) (3GPP TS 29.061 version 6.


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Generic Authentication Architecture (GAA). Zh and Zn Interfaces based on the Diameter protocol. Stage 3 (3GPP TS 29.109 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Multimedia Messaging Service (MMS). MM10 interface based on Diameter protocol. Stage 3 (3GPP TS 29.140 version 6.2.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Interworking between the IM CN subsystem and IP networks (3GPP TS 29.162 version 6.2.0 Release 6)



Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Policy control over Go interface (3GPP TS 29.207 version 6.5.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). End-to-end Quality of Service (QoS) signalling flows (3GPP TS 29.208 version 6.5.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Policy control over Gq interface (3GPP TS 29.209 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Charging rule provisioning over Gx interface (3GPP TS 29.210 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Rx Interface and Rx/Gx signalling flows (3GPP TS 29.211 version 6.2.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). IP Multimedia (IM) Subsystem Cx and Dx Interfaces. Signalling flows and message contents (3GPP TS 29.228 version 5.13.0 Release 5)




Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Cx and Dx interfaces based on the Diameter protocol. Protocol details (3GPP TS 29.229 version 5.11.0 Release 5)




Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Diameter applications. 3GPP specific codes and identifiers (3GPP TS 29.230 version 6.5.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Media Gateway Controller (MGC). Media Gateway (MGW) interface. Stage 3 (3GPP TS 29.232 version 4.13.0 Release 4)






Universal Mobile Telecommunications System (UMTS). 3GPP system to Wireless Local Area Network (WLAN) interworking. Stage 3 (3GPP TS 29.234 version 6.4.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). IP Multimedia Subsystem (IMS) Sh interface. Signalling flows and message contents (3GPP TS 29.328 version 5.11.0 Release 5)




Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Sh interface based on the Diameter protocol. Protocol details (3GPP TS 29.329 version 5.11.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Media Gateway Control Function (MGCF). IM Media Gateway (IM-MGW) Mn interface (3GPP TS 29.332 version 6.3.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Security mechanisms for the (U)SIM application toolkit. Test specification (3GPP TS 31.048 version 5.1.0 Release 5)


Universal Mobile Telecommunications System (UMTS). Characteristics of the USIM application (3GPP TS 31.102 version 5.14.0 Release 5)





Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Characteristics of the IP Multimedia Services Identity Module (ISIM) application (3GPP TS 31.103 version 5.11.0 Release 5)


Digital cellular telecommunications system (Phase 2+). (3GPP TS 31.103 version 6.9.0 Release 6)


Universal Mobile Telecommunications System (UMTS). UICC-terminal interface. Universal Subscriber Identity Module (USIM) application test specification (3GPP TS 31.121 version 3.14.0 Release 1999)








Universal Mobile Telecommunications System (UMTS). Universal Subscriber Identity Module (USIM) conformance test specification (3GPP TS 31.122 version 6.0.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). (U)SIM Application Programming Interface (API). (U)SIM API for Java Card (3GPP TS 31.130 version 6.4.0 Release 6)

TS 132 111:-

Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Fault Management

TS 132 111-2: September 2005(Version 5.7.0)

Alarm Integration Reference Point (IRP). Information Service (IS) (3GPP TS 32.111-2 version 5.7.0 Release 5)




Alarm Integration Reference Point (IRP). Common Object Request Broker Architecture (CORBA) Solution Set (SS) (3GPP TS 32.111-3 version 6.4.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Integration Reference Point (IRP) Concept and definitions (3GPP TS 32.150 version 6.4.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Charging principles (3GPP TS 32.200 version 5.9.0 Release 5)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Charging data description for the IP Multimedia Subsystem (IMS) (3GPP TS 32.225 version 5.9.0 Rele


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Charging data description for application services (3GPP TS 32.235 version 5.5.0 Release 5)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Charging architecture and principles (3GPP TS 32.240 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Circuit Switched (CS) domain charging (3GPP TS 32.250 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Wireless Local Area Network (WLAN) charging (3GPP TS 32.252 version 6.0.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. IP Multimedia Subsystem (IMS) charging (3GPP TS 32.260 version 6.3.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Multimedia Messaging Service (MMS) charging (3GPP TS 32.270 version 6.4.0 Release 6)



Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Location Services (LCS) charging (3GPP TS 32.271 version 6.2.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Push-to-talk over Cellular (PoC) charging (3GPP TS 32.272 version 6.1.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Multimedia Broadcast and Multicast Service (MBMS) charging (3GPP TS 32.273 version 6.1.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Online Charging System (OCS). Applications and interfaces (3GPP TS 32.296 version 6.2.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Charging Data Record (CDR) parameter description (3GPP TS 32.298 version 6.1.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Charging management. Diameter charging applications (3GPP TS 32.299 version 6.4.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). Notification Integration Reference Point (IRP). Common Object Request Broker Architectur


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Generic Integration Reference Point (IRP) management. Common Object Request Broker Architecture (CORBA) Solution Set (S


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. File Transfer (FT) Integration Reference Point (IRP). Common Object Request Broker Architecture (CORBA) Solution Set (S


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Communication Surveillance (CS) Integration Reference Point (IRP). Common Object Request Broker Architecture (CORBA) So


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Entry Point (EP) Integration Reference Point (IRP). Common Object Request Broker Architecture (CORBA) Solution Set (SS)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Performance Management (PM). Performance measurements. UMTS and combined UMTS/GSM (3GPP TS 32.403 version 5.12.0 Releas




Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Performance Management (PM) Integration Reference Point (IRP). Common Object Request Broker Architecture (CORBA) Soluti


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Performance Management (PM) Integration Reference Point (IRP). Common Management Information Protocol (CMIP) Solution S


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Subscriber and equipment trace. Trace control and configuration management (3GPP TS 32.422 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Subscriber and equipment trace. Trace data definition and management (3GPP TS 32.423 version 6.3.0 Release 6)



Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). Basic CM Integration Reference Point (IRP). Common Object Request Broker Architecture (C


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). Bulk CM Integration Reference Point (IRP). Information Service (IS) (3GPP TS 32.612 vers




Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). Bulk CM Integration Reference Point (IRP). Common Object Request Broker Architecture (CO


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). Generic network resources Integration Reference Point (IRP). Bulk CM eXtensible Markup L


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). UTRAN network resources Integration Reference Point (IRP). Network Resource Model (NRM) (3GPP TS 32.642 version 6.5.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). UTRAN network resources Integration Reference Point (IRP). Common Object Request Broker Architecture (CORBA) Solution Set (SS) (3GPP TS 32.643


Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). UTRAN network resources Integration Reference Point (IRP). Bulk CM eXtensible Markup Language (XML) file format definition (3GPP TS 32.645 vers


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). Kernel CM. Information service (IS) (3GPP TS 32.662 version 6.5.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Configuration Management (CM). Kernel CM Integration Reference Point (IRP). Common Object Request Broker Architecture (


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). Telecommunication management. Inventory Management (IM). Requirements (3GPP TS 32.690 version 6.1.0 Release 6)


Universal Mobile Telecommunications System (UMTS). 3G security. Security architecture (3GPP TS 33.102 version 5.6.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Presence service. Security (3GPP TS 33.141 version 6.2.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). 3G security. Access security for IP-based services (3GPP TS 33.203 version 5.10.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Generic Authentication Architecture (GAA). Generic bootstrapping architecture (3GPP TS 33.220 version 6.6.0 Release 6)



Universal Mobile Telecommunications System (UMTS). Generic Authentication Architecture (GAA). Access to network application functions using Hypertext Transfer Protocol over Transport Layer Security (HTTPS) (3GPP TS 33.222 version 6.5.0 Release 6)


Universal Mobile Telecommunications System (UMTS). 3G security. Wireless Local Area Network (WLAN) interworking security (3GPP TS 33.234 version 6.6.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Universal Mobile Telecommunications System (UMTS). 3G Security. Security of Multimedia Broadcast/Multicast Service (MBMS) (3GPP TS 33.246 version 6.4.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Common test environments for User Equipment (UE) conformance testing (3GPP TS 34.108 version 5.6.0 Release 5)




Universal Mobile Telecommunications System (UMTS). Terminal Conformance Specification, Radio Transmission and Reception (FDD) (3GPP TS 34.121 version 6.2.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Terminal conformance specification, Radio transmission and reception (TDD) (3GPP TS 34.122 version 5.1.0 Release 5)

TS 134 123:-

Universal Mobile Telecommunications System (UMTS). User Equipment (UE) conformance specification


Protocol conformance specification (3GPP TS 34.123-1 version 5.13.1 Release 5)




Implementation conformance statement (ICS) specification (3GPP TS 34.123-2 version 5.13.0 Release 5)




Abstract test suites (ATSs) (3GPP TS 34.123-3 version 5.2.0 Release 5)


Universal Mobile Telecommunications System (UMTS). Terminal conformance specification. Assisted Global Positioning System (A-GPS). Frequency Division Duplex (FDD) (3GPP TS 34.171 version 6.1.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Specification of the 3GPP confidentiality and integrity algorithms. Document 1. f8 and f9 specifications (3GPP TS 35.201 version 6.1.0 Release 6)


Universal Mobile Telecommunications System (UMTS). Specification of the 3GPP confidentiality and integrity algorithms. Document 2. Kasumi algorithm specification (3GPP TS 35.202 version 6.1.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Technical Specifications and Technical Reports for a GERAN-based 3GPP system (3GPP TS 41.101 version 5.11.0 Release 5)




Digital cellular telecommunications system (Phase 2+). Security-related network functions (3GPP TS 43.020 version 6.2.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Voice Group Call Service (VGCS). Stage 2 (3GPP TS 43.068 version 6.6.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Mobile Station. Serving GPRS Support Node (MS-SGSN) Logical Link Control (LLC) Layer Specification (3GPP TS 44.064 version 6.1.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Mobile Station (MS). Serving GPRS Support Node (SGSN). Subnetwork Dependent Convergence Protocol (SNDCP) (3GPP TS 44.065 version 6.5.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Channel coding (3GPP TS 45.003 version 5.13.0 Release 5)





Digital cellular telecommunications system (Phase 2+). Radio transmission and reception (3GPP TS 45.005 version 4.17.0 Release 4)






Digital cellular telecommunications system (Phase 2+). Radio subsystem link control (3GPP TS 45.008 version 5.20.0 Release 5)




Digital cellular telecommunications system (Phase 2+). Mobile Switching Centre. Base Station system (MSC-BSS) interface. Layer 3 specification (3GPP TS 48.008 version 6.11.0 Release 6)


Digital cellular telecommunications system (Phase 2+). General Packet Radio Service (GPRS). Base Station System (BSS). Serving GPRS Support Node (SGSN). BSS GPRS protocol (BSSGP) (3GPP TS 48.018 version 6.10.0 Release 6)

TS 151 010:-

Digital cellular telecommunications system (Phase 2+). Mobile Station (MS) conformance specification


Conformance specification (3GPP TS 51.010-1 version 6.4.1 Release 6)


Protocol Implementation Conformance Statement (PICS) proforma specification (3GPP TS 51.010-2 version 6.4.0 Release 6)


Layer3 (L3) Abstract Test Suite (ATS) (3GPP TS 51.010-3 version 6.3.0 Release 6)


Inter-Radio-Access-Technology (RAT) (GERAN / UTRAN) interaction Abstract Test Suite (ATS) (3GPP TS 51.010-5 version 6.4.0 Release 6)


Digital cellular telecommunications system (Phase 2+). Test specification for Subscriber Identity Module (SIM) Application Programming Interface (API) for Java Card (3GPP TS 51.013 version 5.5.0 Release 5)

ETSI DOCUMENTS ISSUED FOR ONE STEP APPROVAL PROCEDURE (OAP)The following ETSI documents are issued under the One-Step Approval OP20060217.<CR>Comments are welcome and should be addressed to the named contact to arrive by 13 January 2006.EN 300 392:-

Terrestrial Trunked Radio (TETRA). Voice plus Data (V+D)

EN 300 392-12:-Supplementary services stage 3

EN 300 392-12-6: October 2005(Version 1.3.0)

Call Authorized by Dispatcher (CAD)Contact: Nicolas WoollardEmail: [email protected]: Please order by quoting the reference 05/635096 DC (ETSI)£20.00

TCT/TTR

EN 300 394:-

Terrestrial Trunked Radio (TETRA). Conformance testing specification

EN 300 394-1: October 2005(Version 2.4.0)Radio

Contact: Nicolas WoollardEmail: [email protected]: Please order by quoting the reference 05/635097 DC (ETSI)£20.00

TCT/TTR

FINAL ETSI DRAFTS FOR VOTEVote V20051216

EN 302 326:-

Fixed Radio Systems. Multipoint Equipment and Antennas

EN 302 326-1: October 2005(Version 1.1.1)

Overview and Requirements for Digital Multipoint Radio SystemsContact: Stephen TalbotEmail: [email protected]: Please order by quoting the reference 05/635099 DC (ETSI)£20.00

TCT/TM4/MP


Harmonized EN covering the essential requirements of Article 3.2 of the R&TTE Directive for Digital Multipoint Radio EquipmentContact: Stephen TalbotEmail: [email protected]: Please order by quoting the reference 05/635100 DC (ETSI)£20.00

TCT/TM4/MP

of 75FINAL ETSI DRAFTS FOR VOTE


Harmonized EN covering the essential requirements of Article 3.2 of the R&TTE Directive for Multipoint Radio AntennasContact: Stephen TalbotEmail: [email protected]: Please order by quoting the reference 05/635101 DC (ETSI)£20.00

TCT/TM4/MP

IEC PUBLICATIONS

IEC 60027:-

Letter symbols to be used in electrical technology

IEC 60027-1:-General

AMENDMENT 2:October 2005to IEC 60027-1:1992


SS/7

IEC 60076:-Power transformers

IEC 60076-10-1:2005

Determination of sound levels. Application guide£108.80 members£113.33 non-members

PEL/14

IEC 60081:-

Double-capped fluorescent lamps. Performance specificationsAMENDMENT 3:September 2005to IEC 60081:2000


CPL/34/1

IEC 60092:-Electrical installation in ships

IEC 60092-352:2005(Edition 3)

Choice and installation of electric cables£108.80 members£113.33 non-members

GEL/20/6

IEC 60216:-

Electrical insulating materials. Thermal endurance properties

IEC 60216-2:2005(Edition 4)

Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria£40.00 members£41.67 non-members

GEL/15/5

IEC 60317:-

Specifications for particular types of winding wires

IEC 60317-0-1:-

General requirements. Enamelled round copper wireAMENDMENT 2:September 2005to IEC 60317-0-1:1997


GEL/55

IEC 60320:-

Appliance couplers for household and similar general purposes

IEC 60320-2-4:2005

Couplers dependent on appliance weight for engagement£80.00 members£83.33 non-members

JPEL/64

IEC 60335:-

Household and similar electrical appliance. Safety

IEC 60335-2:-Particular requirements

IEC 60335-2-15:2005(Edition 5.1)Appliances for heating liquids


CPL/61/07

IEC 60335-2-43:-

Appliances for clothes dryers and towel railsAMENDMENT 1:September 2005to IEC 60335-2-43:2002


CPL/61/07

IEC 60335-2-67:-

Floor treatment and floor cleaning machines, for industrial and commercial useAMENDMENT 1:September 2005to IEC 60335-2-67:2002


CPL/61/10

IEC 60335-2-68:-

Spray extraction appliances, for industrial and commercial useAMENDMENT 1:October 2005to IEC 60335-2-68:2002


CPL/61/10

IEC 60422:2005(Edition 3)

Mineral insulating oils in electrical equipment. Supervision and maintenance guidance£108.80 members£113.33 non-members

GEL/10

IEC 60456:-

Clothes washing machines for household use. Methods for measuring the performanceCORRIGENDUM 1:September 2005to IEC 60456:2003

CPL/59/1

IEC 60534:-Industrial-process control valves

IEC 60534-8-1:2005(Edition 2)

Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves£54.40 members£56.67 non-members

GEL/65/2

IEC/TR 60870:-

Telecontrol equipment and systems

IEC/TR 60870-6-505:-

Telecontrol protocols compatible with ISO standards and ITU-T recommendations TASE.2 user guideAMENDMENT 1:September 2005to IEC/TR 60870-6-505:2002


PEL/57

of 75IEC PUBLICATIONS

IEC 60950:-

Information technology equipment safety

IEC 60950-23:2005Large data storage equipment


EPL/108

IEC 61000:-

Electromagnetic compatibility (EMC)

IEC 61000-4:-

Testing and measurement techniques

IEC 61000-4-33:2005

Measurement methods for high-power transient parameters£145.60 members£151.67 non-members

GEL/210/12

IEC 61000-4-34:2005

Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16A per phase£88.00 members£91.67 non-members

GEL/210/8

IEC 61160:2005(Edition 2)Design review


DS/1

IEC 61162:-

Maritime navigation and radiocommunication equipment and systems. Digital interfaces

IEC 61162-402:2005

Multiple talkers and multiple listeners. Ship systems interconnection Documentation and test requirements£94.40 members£98.33 non-members

EPL/80


Industrial systems, installation and equipment and industrial products. Designation of signals£108.80 members£113.33 non-members

GEL/3

IEC 61300:-

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures

IEC 61300-3-1:2005(Edition 2)

Examinations and measurements. Visual examination£30.40 members£31.67 non-members

GEL/86/2

IEC 61332:2005(Edition 2)Soft ferrite material classification


EPL/51


Calibration of fibre optic chromatic dispersion test sets£123.20 members£128.33 non-members

GEL/86

IEC 61925:2005

Multimedia systems and equipment. Multimedia home server systems. The vocabulary of home server£30.40 members£31.67 non-members

EPL/100

IEC 61935:-(Edition 2)

Testing of balanced communication cabling in accordance with ISO/IEC 11801

IEC 61935-2:2005(Edition 2)Patch cords and work area cords


EPL/46

IEC 61967:-

Integrated circuits. Measurement of electromagnetic emissions, 150KHz to 1GHz

IEC 61967-2:2005

Measurement of radiated emissions. TEM-cell and wideband TEM cell method£65.60 members£68.33 non-members

EPL/47

IEC 62053:-

Electricity metering equipment (AC). Particular requirements

IEC 62053-52:2005Symbols


PEL/13

IEC 62055:-

Electricity metering. Payment systems

IEC 62055-31:2005

Particular requirements. Static payment meters for active energy (Classes 1 & 2)£145.60 members£151.67 non-members

PEL/13

IEC 62132:-

Integrated circuits, Measurement of electromagnetic immunity 150kHz to 1GHz

IEC 62132-5:2005

Measurement of conducted immunity. Workbench Faraday cage method£65.60 members£68.33 non-members

EPL/47

IEC/TR 62154:2005

Terminology in the area of information structures, documentation and graphical symbols£123.20 members£128.33 non-members

GEL/3

IEC 62317:-Ferrite cores. Dimensions

IEC 62317-4:2005RM-cores and associated parts


EPL/51

of 75IEC PUBLICATIONS

IEC 62317-7:2005EER-cores


EPL/51

IEC/TS 62332:-

Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components

IEC/TS 62332-1:2005General requirements


GEL/98

IEC/PAS PUBLICATIONS

IEC/PAS 62437:2005

Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices. Limits and methods of measurement. Specifications for active antennas£40.00 members£41.67 non-members

GEL/210/11

ISO PUBLICATIONS

ISO 31:-Quantities and units

ISO 31-0:-General principles

AMENDMENT 2:October 2005to ISO 31-0:1992


SS/7Will be implemented as an identical British Standard

ISO 36:2005(Edition 4)

Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics£30.40 members£31.67 non-members

PRI/22Will be implemented as an identical British Standard


Rolling bearings. Thrust bearings. Tolerances£48.00 members£50.00 non-members

MCE/7Will be implemented as an identical British Standard

ISO 289:-

Rubber, unvulcanized. Determinations using a shearing-disc viscometer

ISO 289-1:2005(Edition 2)Determination of Mooney viscosity



ISO 294:-

Plastics. Injection moulding of test specimens of thermoplastic materials

ISO 294-1:-

General principles, and moulding of multipurpose and bar test specimens Amendment 2: Methods of determining the hold pressure and hold timeAMENDMENT 2:September 2005to ISO 294-1:1996



ISO 668:-

Series 1 freight containers. Classification, dimensions and ratingsAMENDMENT 2:October 2005to ISO 668:1995


TW/1Will be implemented as an identical British Standard

ISO 1436:-

Rubber hoses and hose assemblies. Wire braid reinforced for hydraulic types. Specification

ISO 1436-2:2005Water-based fluid applications



ISO 2475:-

Chloroprene rubber (CR). General-purpose types. Evaluation procedureAMENDMENT 1:October 2005to ISO 2475:1999


PRI/50Will be implemented as an identical British Standard by amendment to a National Standard


Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)£35.20 members£36.67 non-members



Oil of lime, Mexican type [Citrus aurantifolia (Christm.) Swingle], obtained by distillation£41.60 members£43.33 non-members

AW/54Will be implemented as an identical British Standard

ISO 3862:-

Rubber hose and hose assemblies. Rubber covered spiral wire reinforced hydraulic types. Specification

ISO 3862-2:2005Water-based fluid applications


PRI/66/3Will be implemented as an identical British Standard

of 75ISO PUBLICATIONS


Rubber. Nitrile latex. Determination of residual acrylonitrile content£30.40 members£31.67 non-members


ISO 4064:-

Measurement of water flow in fully charged closed conduits. Meters for cold potable water and hot water

ISO 4064-1:2005(Edition 3)Specifications


CPI/30/7/1Will not be implemented as a British Standard

ISO 4064-2:2005(Edition 3)Installation requirements


CPI/30/7/1Will be implemented as an identical British Standard

ISO 4064-3:2005(Edition 3)Test methods and equipment


CPI/30/7/1Will not be implemented as a British Standard


Rubber hoses and hose assemblies for water suction and discharge. Specification£48.00 members£50.00 non-members


ISO 5019:-Refractory bricks. Dimensions

ISO 5019-6:2005(Edition 2)

Basic bricks for oxygen steel-making converters£35.20 members£36.67 non-members

RPI/1Will be implemented as an identical British Standard


Door leaves. General and local flatness. Measurement method£25.60 members£26.67 non-members

B/538/2Will not be implemented as a British Standard


Door leaves. Method for measurement of height, width, thickness and squareness£30.40 members£31.67 non-members



Door leaves. Determination of the behaviour under humidity variations in successive uniform climates£30.40 members£31.67 non-members



Doors. Behaviour between two different climates. Test method£59.20 members£61.67 non-members



Rubber, vulcanized or thermoplastic. Determination of tendency to adhere and to corrode metals£56.00 members£58.33 non-members


ISO 6621:-

Internal combustion engines. Piston rings

ISO 6621-5:2005(Edition 2)Quality requirements


MCE/14/-/10Will be implemented as an identical British Standard


Sensory analysis. Methodology. General guidance£68.80 members£71.67 non-members



Rubber and plastics hose and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing£30.40 members£31.67 non-members


ISO/IEC 7811:-

Identification cards. Recording technique

ISO/IEC 7811-6:-Magnetic strip. High coercivity

AMENDMENT 1:October 2005to ISO/IEC 7811-6:2001


IST/17Will not be implemented as a British Standard. Is approved as suitable for use in the UK

ISO/IEC 7816:-

Identification cards. Integrated circuit cards

ISO/IEC 7816-12:2005

Cards with contacts. USB electrical interface and operating procedures£105.60 members£110.00 non-members

IST/17Will be implemented as an identical British Standard



Ophthalmic optics. Spectacle frames. List of equivalent terms. Vocabulary£83.20 members£86.67 non-members

CH/172Will be implemented as an identical British Standard


Carbonaceous materials used in the production of aluminium. Green and calcined coke. Determination of ash content£30.40 members£31.67 non-members

CII/24Will be implemented as an identical British Standard


Dried milk and dried milk products. Determination of insolubility index£48.00 members£50.00 non-members



Door leaves. Determination of the resistance to hard body impact£30.40 members£31.67 non-members



Windows and doors. Resistance to repeated opening and closing. Test method£48.00 members£50.00 non-members


ISO 8502:-

Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface

ISO 8502-2:2005(Edition 2)

Laboratory determination of chloride on cleaned surfaces£35.20 members£36.67 non-members

STI/21Will be implemented as an identical British Standard


Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)]£35.20 members£36.67 non-members



Operating forces. Test method. Doors£35.20 members£36.67 non-members



Hinged or pivoted doors. Determination of the resistance to static torsion£30.40 members£31.67 non-members


ISO 9393:-

Thermoplastics valves for industrial applications. Pressure test methods and requirements

ISO 9393-2:2005(Edition 2)

Test conditions and basic requirements£35.20 members£36.67 non-members

PRI/88/4Will not be implemented as a British Standard

ISO/IEC 9541:-

Information technology. Document description and processing languages font information interchange

ISO/IEC 9541-3:-

Glyph shape representation. Amendment 1: Additional shape representation technologyAMENDMENT 1:October 2005to ISO/IEC 9541-3:1994



ISO 9693:-

Metal-ceramic dental restorative systemsAMENDMENT 1:October 2005to ISO 9693:1999


CH/106/2Will be implemented as an identical British Standard

ISO 10050:2005

Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for triaryl phosphate ester turbine control fluids (category ISO-L-TCD)£35.20 members£36.67 non-members


ISO 10303:-

Industrial automation systems and integration. Product data representation and exchange

ISO 10303-14:2005

Description methods: the EXPRESS-X language reference manual£137.60 members£143.33 non-members

AMT/4Will not be implemented as a British Standard. Is approved as suitable for use in the UK


Road vehicles. Brake lining assemblies. Inertia dynamometer test method£68.80 members£71.67 non-members

AUE/11Will be implemented as an identical British Standard


ISO 12567:-

Thermal performance of windows and doors. Determination of thermal transmittance by hot box method

ISO 12567-2:2005

Roof windows and other projecting windows£78.40 members£81.67 non-members

B/540Will be implemented as an identical British Standard

ISO 12647:-

Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints

ISO 12647-3:2005(Edition 2)

Coldset offset lithography on newsprint£59.20 members£61.67 non-members

PAI/43Will be implemented as an identical British Standard

ISO 13357:-

Petroleum products . Determination of the filterability of lubricating oils

ISO 13357-2:2005(Edition 2)Procedure for dry oils



ISO 13628:-

Petroleum and natural gas industries. Design and operation of subsea production systems

ISO 13628-10:2005

Specification for bonded flexible pipe£129.60 members£135.00 non-members

PSE/17/-/4Will be implemented as an identical British Standard

ISO 14490:-

Optics and optical instruments. Test methods for telescopic systems

ISO 14490-6:2005

Test methods for veiling glare index£41.60 members£43.33 non-members

CPW/172Will be implemented as an identical British Standard

ISO/IEC 14496:-

Information technology. Coding of audio-visual objects

ISO/IEC 14496-1:-

Systems. Amendment 2: Support for 3D compression profileAMENDMENT 2:October 2005to ISO/IEC 14496-1:2004


IST/37Will not be implemented as a British Standard

ISO/IEC 14496-2:-

Visual. Amendment 2: New levels for simple profileAMENDMENT 2:October 2005to ISO/IEC 14496-2:2004



ISO 14692:-

Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping

ISO 14692-2:-Qualification and manufacture

CORRIGENDUM 1:October 2005to ISO 14692-2:2002

PSE/17/-/6Will be implemented as an identical British Standard

ISO 14708:-

Implants for surgery. Active implantable medical devices

ISO 14708-2:2005Cardiac pacemakers


CH/150/6Will not be implemented as a British Standard


Rubber. Determination of frictional properties£68.80 members£71.67 non-members


ISO 15236:-Steel cord conveyor belts

ISO 15236-1:2005

Design, dimensions and mechanical requirements for conveyor belts for general use£59.20 members£61.67 non-members

PRI/67Will be implemented as a related British Standard

ISO 15389:-

Space systems. Flight-to-ground umbilicals. Amendment 1: Prevention of accidental cross-connectionAMENDMENT 1:October 2005to ISO 15389:2001


ACE/68Will be implemented as an identical British Standard

ISO/IEC 15408:-

Information technology. Security techniques. Evaluation criteria for IT security

ISO/IEC 15408-2:2005(Edition 2)Security functional requirements



ISO/IEC 15408-3:2005(Edition 2)Security assurance requirements




ISO/IEC 15434:2005(Edition 2)

Information technology. Syntax for high-capacity automatic data capture (ADC) media£59.20 members£61.67 non-members


ISO 15502:2005

Household refrigerating appliances. Characteristics and test methods£137.60 members£143.33 non-members

RHE/5Will be implemented as an identical British Standard

ISO/TR 15608:2005(Edition 2)

Welding. Guidelines for a metallic materials grouping system£35.20 members£36.67 non-members

WEE/36Will be implemented as an identical British Standard

ISO 15928:-

Houses. Description of performance

ISO 15928-2:2005Structural serviceability


B/500Will be implemented as an identical British Standard

ISO/IEC 15938:-

Information technology. Multimedia content description interface

ISO/IEC 15938-8:-

Extraction and use of MPEG-7 descriptionsCORRIGENDUM 1:October 2005to ISO/IEC 15938-8:2002


ISO 16014:-

Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography

ISO 16014-1:-General principles

CORRIGENDUM 1:September 2005to ISO 16014-1:2003


ISO 16121:-

Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses

ISO 16121-1:2005

General description, basic requirements£56.00 members£58.33 non-members


ISO 16121-2:2005Visibility



ISO 16121-3:2005Information devices and controls



ISO 16151:2005

Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions£59.20 members£61.67 non-members

ISE/NFE/8Will be implemented as an identical British Standard

ISO 16665:2005

Water quality. Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna£86.40 members£90.00 non-members

EH/3/5Will be implemented as an identical British Standard

ISO 16860:2005

Hydraulic fluid power. Filters. Method of test for differential pressure devices£48.00 members£50.00 non-members


ISO 16962:2005

Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry£86.40 members£90.00 non-members


ISO 17455:2005

Plastics piping systems. Multilayer pipes. Determination of the oxygen permeability of the barrier pipe£48.00 members£50.00 non-members

PRI/88/4Will be implemented as an identical British Standard

ISO 17475:2005

Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarisation measurements£56.00 members£58.33 non-members

ISE/NFE/8Will be implemented as an identical British Standard

ISO/IEC 18045:2005

Information technology. Security techniques. Methodology for IT security evaluation£190.40 members£198.33 non-members


ISO 18084:2005

Press tools for tablets. Punches and dies£56.00 members£58.33 non-members

MTE/12Will be implemented as an identical British Standard


ISO 18629:-

Industrial automation systems and integration. Process specification language

ISO 18629-11:2005PSL core



ISO 18629-12:2005Outer core



ISO 19005:-

Document management. Electronic document file format for long-term preservation

ISO 19005-1:2005Use of PDF 1.4 (PDF/A-1)


IDT/1/2Will be implemented as an identical British Standard

ISO 19133:2005

Geographic information. Location based services. Tracking and navigation£155.20 members£161.67 non-members

IST/36Will not be implemented as a British Standard

ISO 19135:2005

Geographic information. Procedures for item registration£112.00 members£116.67 non-members


ISO 19921:2005

Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Test methods£48.00 members£50.00 non-members

SME/32/3Will be implemented as an identical British Standard

ISO 19922:2005

Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Requirements on the test bench£41.60 members£43.33 non-members

SME/32/3Will be implemented as an identical British Standard

ISO 20179:2005

Water quality. Determination of microcystins. Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection£64.00 members£66.67 non-members

EH/3/2Will not be implemented as a British Standard

ISO 20203:2005

Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of crystallite size of calcined petroleum coke by X-ray diffraction£41.60 members£43.33 non-members


ISO 20344:-

Personal protective equipment. Test methods for footwearCORRIGENDUM 1:September 2005to ISO 20344:2004

PH/1Will be implemented as an identical British Standard

ISO 20345:-

Personal protective equipment. Safety footwearCORRIGENDUM 1:September 2005to ISO 20345:2004


ISO 20346:-

Personal protective equipment. Protective footwearCORRIGENDUM 1:September 2005to ISO 20346:2004


ISO 20347:-

Personal protective equipment. Occupational footwearCORRIGENDUM 1:September 2005to ISO 20347:2004


ISO/TR 20514:2005

Health informatics. Electronic health record. Definition, scope and context£83.20 members£86.67 non-members


ISO 20585:2005

Wood-based panels. Determination of wet bending strength after immersion in water at 70$0DC (boiling temperature)£30.40 members£31.67 non-members

B/541Will not be implemented as a British Standard

ISO/IEC 21000:-

Information technology. Multimedia framework (MPEG-21)

ISO/IEC 21000-2:2005(Edition 2)Digital item declaration




ISO 21148:2005

Cosmetics. Microbiology. General recommendations for microbiological examinations£73.60 members£76.67 non-members

CW/217Will be implemented as an identical British Standard

ISO 21390:2005

Oil of wintergreen, China [Gaultheria yunnanensis (Franch.) Rehd.], redistilled£35.20 members£36.67 non-members


ISO 21413:2005

Manual methods for the measurement of a groundwater level in a well£86.40 members£90.00 non-members

CPI/113/8Will be implemented as an identical British Standard

ISO 22827:-

Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery

ISO 22827-1:2005Laser assembly


WEE/-/1Will be implemented as an identical British Standard

ISO 22827-2:2005Moving mechanism


WEE/-/1Will be implemented as an identical British Standard

ISO 23953:-Refrigerated display cabinets

ISO 23953-1:2005Terms and definitions



ISO 23953-2:2005

Classification, requirements and test conditions£129.60 members£135.00 non-members


ISO 24369:2005

Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of content of coarse particles in ceramic powders by wet sieving method£35.20 members£36.67 non-members

RPI/13Will not be implemented as a British Standard

ISO/IEC TR 24705:2005

Information technology. Office machines. Machines for colour image reproduction. Method of specifying image reproduction of colour devices by digital and analog test charts£129.60 members£135.00 non-members


ISO 81400:-Wind turbine

ISO 81400-4:2005

Design and specification of gearboxes£137.60 members£143.33 non-members

MCE/5Will be implemented as an identical British Standard

IWA 1:2005

Quality management systems. Guidelines for process improvements in health service organizations£68.80 members£71.67 non-members

CH/100Will not be implemented as a British Standard

IWA 3:2005

Image safety. Reducing the incidence of undesirable biomedical effects caused by visual image sequences£30.40 members£31.67 non-members


IWA 4:2005

Quality management systems. Guidelines for the application of ISO 9001£51.20 members£53.33 non-members



BS Codes List

Documents

Transcript of BS Codes List