Brulon Catalogue Final 22.06

Premium Teeth

BRULON TEETH

BRULON WAX

Classic Acrylic Teeth

Standard Acrylic Teeth

Shellac Base PlateBite Registration Wax

BRULON DENTURE BASE MATERIALS

BRULON C&B MATERIALS

BRULON DIGITAL PROSTHETIC SOLUTIONS

Boxing WaxSpacer Wax

AquaSeal

V X LV X L

R X L R X L

B I O R O C K V X L

PRIMAPRIMA FORM

P R I M A P A N X L

Dravlon Heat Cure

Dravlon Cold Cure

Heat Cure, Cold CureZAVLON

B i o D i s c T E M Ppg 1

pg 2

pg 3

pg 4

pg 5

pg 9

pg 10

pg 11

pg 13

pg 13

pg 14

pg 14

pg 15

pg 15

pg 7

pg 8

pg 12

pg 15

pg 16

Green SticksModelling Wax

Beading Wax

INDEX

pg 6P E R I R O C K G X L

Brulon decided to start its own manufacturing of artificial resin teeth and the unit was established in New Delhi, the capital of India.

Brulon decided to start its own manufacturing of artificial resin teeth and the unit was established in New Delhi, the capital of India.

Production of Perilon V XL - first artificial acrylic teeth & standard shade guide. Brulon Classic A1-D4.

Production of Perilon V XL - first artificial acrylic teeth & standard shade guide. Brulon Classic A1-D4.

Introduction of Primapan XL - Diversification of technology.Introduction of Primapan XL - Diversification of technology.

Introduction of Biorock VXL - Best seller tooth of Brulon Teeth range in Asia, North Africa and many European countries.

Introduction of Biorock VXL - Best seller tooth of Brulon Teeth range in Asia, North Africa and many European countries.

Introduction of Perilux RXL - acrylic tooth in three chromatic layers with an especially natural appearance & exceptional quality standards.

Introduction of Periceram, first Brulon ceramic tooth (with alloy pin) in two chromatic layers.

Introduction of Perilux RXL - acrylic tooth in three chromatic layers with an especially natural appearance & exceptional quality standards.

Introduction of Periceram, first Brulon ceramic tooth (with alloy pin) in two chromatic layers.

2000

2011

2003

2008

1990

2005

2013

2015

2014

2012

Introduction of Perirock G XL - first acrylic teeth with dentine/enamel layering.

Introduction of Perirock G XL - first acrylic teeth with dentine/enamel layering.

R&D of Biorock VXL - new generation of tooth molds in two chromatic layers.

R&D of Biorock VXL - new generation of tooth molds in two chromatic layers.

Increased production efficiency of Biorock VXL, to cope up with the rise in demand.

Introduction of Peristar VXL - first Brulon tooth in three chromatic layers with increased

chemical and physical properties.

Increased production efficiency of Biorock VXL, to cope up with the rise in demand.

Introduction of Peristar VXL - first Brulon tooth in three chromatic layers with increased

chemical and physical properties.

A year of comprehensive development & innovation through continuous R&D.

Introduction of Periplus XL - acrylic tooth in multi chromatic layers.

Introduction of Dravlon Heat Cure & Cold Cure Powder/Liquid - High performance

Denture Base Resin Materials.

Introduction of Zavlon C & C16 – for the fabrication of all acrylic Crowns & Bridges

and prosthesis.

Introduction of AqualSeal – insulating fluid that optimally isolates all

Brulon Denture Base Materials.

A year of comprehensive development & innovation through continuous R&D.

Introduction of Periplus XL - acrylic tooth in multi chromatic layers.

Introduction of Dravlon Heat Cure & Cold Cure Powder/Liquid - High performance

Denture Base Resin Materials.

Introduction of Zavlon C & C16 – for the fabrication of all acrylic Crowns & Bridges

and prosthesis.

Introduction of AqualSeal – insulating fluid that optimally isolates all

Brulon Denture Base Materials.

Took over an established European teeth manufacturing unit in Valsad, Gujarat

operational since 1984 on National Highway No. 48,western part of India.

Took over an established European teeth manufacturing unit in Valsad, Gujarat

operational since 1984 on National Highway No. 48,western part of India.

History

BRULON GROUP® has been evolved by the professional experts in Dentistry for the last 60 years. With it’s third genreration in the Dental field, Brulon is deep rooted in Dental trade in India. Brulon Group was founded in 1957 by Late Mr. Tilak Raj Seth with its first showroom in the commercial capital of India, New Delhi.

Creating your present & future filled with smiles and confidence...

60YEARS

Our mission is to provide dental excellence with compassionate care. By being located in the rich Industrial belt of Gujarat, enables us to provide our work force with best environment and facilities, that empowers us to give International quality products at affordable prices to all our customers. Our aim is to build on our history of product excellence and technological innovation to provide the highest quality and most reliable products and services to our worldwide customers in dental prostheses, industry and research.

We are dedicated to assist dentists and dental technicians to restore personal confidence in their patients who yearn to enhance their smiles. Thus, creating confidence with a gentle touch.

BRULON, Creates The Confidence!

Mission

Creating the healthy smile you want through science & artistry!

Brulon! For Innovative, Easy & Efficient Prosthetic Solutions...

BRULONGROUP

R

Creates the confidence

R

Premium Denture TeethBRULON PREMIUM TEETH range offers you incredible natural shade effect with dynamic 3D layered structure, rich surface texture, universal geometrical tooth design, excellent durability due to mechanical resistance. Making it the ideal choice for highly premium aesthetic total, partial and implant-retained dentures.

1

KEY FEATURES/ BENEFITS

PRODUCT OVERVIEW

Outstanding ceramic teeth in two chromatic layers with a gold alloy pin within a hard ceramic core, ensuring long term denture stability. The ceramic teeth are suitable in the domain of high-premium partial and full denture prosthetics. The unrivalled light refraction properties, incorporated with luminescence, fluorescence and opalescence, make them look similar to a natural human tooth. These custom-hand made products offer significant wear and tear resistance, thereby ensuring considerable durability.

AVAILABLE MOULDS

- 6 tooth moulds of upper anteriors. - 6 tooth moulds of lower anteriors.- 4 sets of upper/lower posteriors. - Product kits available in sets of 28 teeth only.

Best prosthet ic solut ion for :• High Premium partial and full denture prosthetics. • An ideal choice for patients who are allergic to MMA.

A v a i l a b l e S h a d e s A1 - A2 - A3

B1 - B2

981025

P r o d u c t C o d e Full Set

• High precision to reduce any minimum possible selective grinding for the technician.• Suitable to any type of edentulous patient. Thanks to its geometrical tooth design and the innovative

• Incorporated with mechanical anchoring elements (gold alloy pin) ensuring denture stability.• Significant wear and tear resistance.

mesio-distal layout.

INDICATIONS

T w o L a y e r C e r a m i c T e e t h w i t h A l l o y P i n

2


PRODUCT OVERVIEW

Premium acrylic teeth fabricated from Polymethyl methacrylate with 4 chromatic layers. Thanks to its innovative multifunctional characteristic for natural aesthetics, it inherents natural shade effect with excellent shade accuracy to the shade guide.

AVAILABLE MOULDS

- 15 tooth moulds of upper anteriors (divided in three groups).- 7 tooth moulds of lower anteriors.- 5 sets of upper/ lower posteriors. - Product kits available only in sets of 28 teeth.

Shades available in 6 Brulon Classic shades (A1, A2, A3, A3.5, B1, B2).Further shades are subject to delivery time.

Best prosthet ic solut ion for :• Highly aesthetic total, partial and implant-retained dentures.

• High durability. Thanks to excellent resistance to abrasion due to double crosslinking. • Unique golden proportion of enamel-dentine. Thus increasing the translucent effect. • Reliable color stability. • Substantial resistance to plaque adhesion.• Ideal choice for dentures with life-like effect.• Optimum bonding characteristics with DravlonTM Denture Base Resins.

A v a i l a b l e S h a d e s A1 - A2 - A3 - A3.5 - A4

B1 - B2 - B3 - B4

C1 - C2 - C3 - C4

D2 - D3 - D4

P r o d u c t C o d e 18102016Full Set

• High precision to reduce any minimum possible selective grinding for the technician.• Suitable to any type of edentulous patient. Thanks to its geometrical tooth design and the innovative

• Incorporated with mechanical anchoring elements (gold alloy pin) ensuring denture stability.• Significant wear and tear resistance.

INDICATIONS

Classic Acrylic Teeth

BRULON CLASSIC ACRYLIC TEETH range offers you inherent natural shade effect with dynamic 3D layered structure, rich surface texture, wide variety of moulds & shades, excellent durability for affordable, ingenious, highly aesthetic total, partial and implant-retained dentures.

3


PRODUCT OVERVIEW

Innovative high grade acrylic teeth produced from Polymethyl methacrylate with 3 chromatic layers. Brilliant aesthetical effect due to the superimposition of the 3 layers and the crown cut of incisal edges. The increased chemical & physical property ensures excellent resistance to abrasion.

AVAILABLE MOULDS

- 15 tooth moulds of upper anteriors (divided in three groups).- 7 tooth moulds of lower anteriors.- 5 sets of upper/ lower posteriors. - Product kits available in sets of 6, 8, 16 & 28.

Shades available in 16 Brulon Classic shades (A1-D4).

Best prosthet ic solut ion for :• Highly aesthetic total, partial and implant-retained dentures. Also ideal for provisional restorations.

• High durability. Thanks to high abrasion stability.• Easy & efficient grinding-polishing due to optimal material homogeneity.• Lifelike prosthetic tooth. Thanks to the tooth geometry & natural shade gradient with superior shade

• Wide range of moulds & shades, making the tooth adaptable to any dental prosthesis requirement.stability.

P r o d u c t C o d e Upper AnteriorUpper Anterior

Lower Anterior

Upper Posterior

Lower Posterior

Full Set

233011

233013

233014

233015

233012


B1 - B2 - B3 - B4

C1 - C2 - C3 - C4

D2 - D3 - D4

V X LV X L

INDICATIONS

11102012

11102013

11102014

11102015

11102016

P r o d u c t C o d e Upper Anterior

Lower Anterior

Upper Posterior

Lower Posterior

Full Set

4


PRODUCT OVERVIEW

Best breed of acrylic teeth produced from Polymethyl methacrylate with 3 chromatic layers. Brilliant lifelike aesthetical effect due to the dynamic 3D layered structure. The rich & subtle surface texture makes it truly a lifelike tooth moulds. Integrated with luminescent & fluorescent effect just like its natural counterpart.

AVAILABLE MOULDS



Best prosthet ic solut ion for :• Highly aesthetic total, partial and implant-retained dentures. Also ideal for provisional restorations.

R X L R X L


B1 - B2 - B3 - B4

C1 - C2 - C3 - C4

D2 - D3 - D4

• Excellent durability. Thanks to high abrasion stability.• Golden proportion of enamel & dentine for good translucent effect.• Versatile prosthetic due to universal tooth geometry.• Rich & subtle surface texture. • Easy process ability due to optimal material uniformity.• Natural shade gradient with superior shade stability. • Wide range of moulds & shades, making the tooth adaptable to any dental prosthesis requirement.

INDICATIONS

5



B1 - B2 - B3 - B4

C1 - C2 - C3 - C4

D2 - D3 - D4

PRODUCT OVERVIEW

Acrylic teeth produced from Polymethyl methacrylate with 2 chromatic layers. Versatile on all aspect of denture prosthesis. Impresses with its lifelike aesthetical effect due to superimposition of the dentine & enamel. The subtle surface texture makes it truly a lifelike tooth moulds with perfect shape. Integrated with luminescent & fluorescent effect. Made for rock solid dentures with best cost efficiency. Completely defines why it is the best seller tooth of Brulon tooth range since its introduction!

• Excellent durability. Thanks to high abrasion stability due to use of high grade of raw materials.• Harmonious connections with adjacent teeth.• Golden proportion of enamel & dentine for good translucent effect.• Versatile prosthetic due to universal tooth geometry.• Natural shade gradient. • Superior color stability. • Optimum bonding characteristics with DravlonTM Denture Base Resins.• Wide range of moulds & shades, making the tooth adaptable to any dental prosthesis requirement.

AVAILABLE MOULDS

- 18 tooth moulds of upper anteriors (divided in three groups)- 9 tooth moulds of lower anteriors.- 7 sets of upper/ lower posteriors. - Product kits available in sets of 6 , 8, 16 & 28 teeth.

• Cost efficient-highly aesthetic total, partial and implant-retained dentures. Also ideal for provisional restorations.

Lower Anterior

13102012

13102013

13102014

13102015

13102016


Upper Posterior

Lower Posterior

Full Set

T w o L a y e r R e s i n T e e t h

B I O R O C K V X L

Best prosthet ic solut ion for :

INDICATIONS

Standard Acrylic Teeth

BRULON STANDARD ACRYLIC TEETH range offers you cost efficiency for standard solid denture teeth ensuring good durability, color stability and tissue friendliness. Available in wide range of moulds and shades. Recommended for patients who are looking for standard denture on an economical budget.

Lower Anterior

12102011

12102012

12102013

12102014

12102015


Upper Posterior

Lower Posterior

Full Set



PRODUCT OVERVIEW

Acrylic teeth produced from Polymethyl methacrylate in two chromatic layers. Good chemical-physical resistance to abrasion. Nature like aesthetics due to superimposition of 2 layers. PeriRock GXL offers solid, standard dentures teeth with cost efficiency for patients on an economical budget.

• Good durability. Thanks to its abrasion stability.• Ideal tissue friendliness.• Color stability• Acquired Biotone moulds.• Wide range of moulds & shades, making the tooth adaptable to any dental prosthesis requirement.

AVAILABLE MOULDS



• Cost efficient total & partial dentures.


B1 - B2 - B3 - B4

C1 - C2 - C3 - C4

D2 - D3 - D4

6

T w o L a y e r R e s i n T e e t h

P E R I R O C K G X L

INDICATIONS

S h a d e G u i d e A1 - A2 - A3 - A3.5 - A4

B1 - B2 - B3 - B4

C1 - C2 - C3 - C4

D2 - D3 - D4



PRODUCT OVERVIEW

Acrylic teeth produced from Polymethyl methacrylate. Optimum chemical-physical resistance. Highly cost efficient.

• Good durability. Thanks to its abrasion stability.• Color stability. • Wide range of moulds & shades, making the tooth adaptable to any dental prosthesis requirement.

AVAILABLE MOULDS


Shades: Available in 16 Brulon Classic shades (A1-D4).

Lower Anterior

9910 12

991013

991014

991015

991016


Upper Posterior

Lower Posterior

Full Set


7

INDICATIONS

S i n g l e L a y e r R e s i n T e e t h

PRIMAPRIMA FORM

S h a d e G u i d e A1 - A2 - A3 - A3.5 - A4

B1 - B2 - B3 - B4

C1 - C2 - C3 - C4

D2 - D3 - D4

Lower Anterior

3302011

3302012

3302013

3302014

3302015


Upper Posterior

Lower Posterior

Full Set



PRODUCT OVERVIEW

Acrylic teeth produced from Polymethyl methacrylate. Optimum chemical-physical resistance. Highly cost efficient for standard solid denture teeth.

• Good durability. Thanks to its resistance to abrasion.• Color stability. • Wide range of moulds & shades, making the tooth adaptable to any dental prosthesis requirement.

AVAILABLE MOULDS

- 25 tooth moulds of upper anteriors (divided in three groups).- 18 tooth moulds of lower anteriors.- 4 sets of upper/ lower posteriors. - Product kits available in sets of 6 , 8, 16 & 28.

Shades available in 16 Brulon Classic shades. (A1-D4).


S i n g l e L a y e r R e s i n T e e t h

P R I M A P A N X L

8

INDICATIONS

Denture Base Resin Materials

BRULON DRAVLON DENTURE BASE RESIN MATERIAL offers easy and fast processing of dentures for busy technicians in dental laboratories. Cost efficiency along with inherent high durability, colour stability and biocompatibility makes it completely reliable than any competitor in the market. The use of high quality raw materials and unique processing technique allows us to surpass all required quality standards.

9

DravlonD e n t u r e B a s e R e s i n M a t e r i a l

H e a t C u r e

• Cost efficient-high performance total & partial denture, extensions, relinings.

Pink, Veined Pink, Clear


PRODUCT OVERVIEW

Dravlon Heat Cure Denture Base Material has been designed to make technicians working environment safe with ease of work. The use of high quality raw materials and unique processing technique offers great oral hygiene and tissue friendliness, thanks to its perfect denture surface properties and low residual monomer content. Cost efficiency and high durability makes it reliable for regular works in dental laboratories.

• Great fluidity and ease of working due to super fine polymer.• Short dough time upto 8 minutes at 23oC.• Long working time upto 30-40 minutes depending on room temperature.• Tissue friendliness. Thanks to its low residual monomer content. • High durability. Thanks to its mechanical properties to resistance. • Superior color stability.• Low shrinkage during polymerisation.• Less plaque build up.• Economical price.

AVAILABLE SHADES

Regular Powder - 500 g, 1000 g, 3000 gHI-Impact Powder - 100 g

Monomer - 250 ml, 1500 ml

AVAILABLE PACKAGING

Best solut ion for :

INDICATIONS

• Cost efficient high performance model casting, relinings or repairs of total and partial dentures.

Pink, Veined Pink, Clear

10

DravlonD e n t u r e B a s e R e s i n M a t e r i a l

C o l d C u r e


PRODUCT OVERVIEW

Dravlon Cold Cure Denture Base Material has been designed to make technicians provide instant solution in denture artistry. The use of high molecular weight resin material and unique processing technique offers great strength in oral hygiene and tissue friendliness, with perfect denture surface properties and low residual monomer content. Cost efficiency and high performance makes it reliable for regular repair works in dental laboratories.

• Short processing time upto 8 minutes.• Tissue friendliness due to its low residual monomer content. • Excellent adhesion.• Superior color stability.• Great flow and ease of working. Thanks to super fine polymer.• Cost efficient solution for use in the dental laboratories.

AVAILABLE SHADES

Powder - 250 g, 1000 gMonomer - 110 ml, 500 ml

AVAILABLE PACKAGING


INDICATIONS

C o l d M o u l d S e a l

AquaSeal

PRODUCT OVERVIEWAquaSeal from Brulon is an alginate based superior aqueous solution for the separation of plaster surfaces from composites and denture acrylics. Also, offers a variety of requirements for isolation like smooth surface representation, fast drying time and effortless separation when used with heat and cold cure denture base acrylic materials. Thus, providing excellent insulation to achieve a precisely fitted prosthetic restoration.


• Smooth surface reproduction.• Minimum trimming requirement.• Short drying time.• Biocompatible.• Good storage stability.• Non-reactive, reliable polymerisation on all surfaces.

Separating gypsum from denture base acrylic (heat & cold cure).Separating gypsum to composite.Separating plaster from plaster.

INDICATIONS

1000 ml, 3000 ml

AVAILABLE PACKAGING

11

Crown & Bridge Materials

BRULON CROWN & BRIDGE MATERIAL offers high molecular weight acrylic resin for long lasting temporary works in the laboratory, aesthetic covering on metal crowns and bridges repairs. The high quality material ensures aesthetic and functional demand with maximum precision & efficiency.

ZAVLON-C ZAVLON-C16H e a t C u r e C o l d C u r e


PRODUCT OVERVIEW

Zavlon temporary Crown & Bridge Resin Materials offers fast, strong temporaries with great aesthetics. Automixed with two component material intended for use in both short and long term temporary restorative procedures including provisional veneers, onlays, inlays & crowns or bridges.

AVAILABLE SHADES


• Versatile.• Bonds to itself for easy repair.• Polishes to a natural luster for superb results.• Great consistency for easy handling and cleanup.• Abrasion and breakage resistant.• Biocompatible.• Wide range of shades.

Best solut ion for :Highly aesthetic long term temporary restorative procedures including provisional veneers, onlays, inlays & crowns or bridges.

INDICATIONS

AVAILABLE PACKAGING

Heat Cure Powder - 55g, 500g (Dentine), (Enamel), (Neck)Cold Cure Powder - 55g, 500g (Dentine), (Enamel), (Neck)

Regular Monomer (55ml, 500ml) - For the traditional technique with flask.Special Monomer(55ml, 500ml) - For the free stratification technique with spatula.Self Curing Monomer(55ml, 500ml) - For repairs and temporaries.

12

Brulon Waxes

BRULON DENTAL WAXES offer a range of perfectly graded and controlled waxes for various Dental applications. Each wax has tightly controlled softening properties designed to suit the most efficient working techniques and local climatic conditions.

INDICATIONS

Brulon Modelling Wax is translucent pink, approximately 1.5 mm thick thermoplastic sheets with extra toughness. These sheets are used for modelling removable prosthesis & have dimensions of about 17.4 x 8.9 cm.

Brulon Green Sticks are thermoplastic impression sticks for relining impressions and are useful as space mantainer.

• For border extension on impression trays.• Modify dentate tray by building up material where tooth has been extracted.• Ideal for recording full depth of sulcus.• For functional and relining impressions.

• Wide working area.• Easy and quick hardening in cold water.• Easy to warm up.• Quick and uniform plasticity.

G R E E N S T I C K S

M O D E L L I N G W A X

PRODUCT OVERVIEW

PRODUCT OVERVIEW



AVAILABLE PACKAGING

INDICATIONS

• Translucent Pink.• Extra toughness. When heated, moulds quicky.• Trims easily and cleanly and does not adhere to fingers.• No unpleasant odour.• Shows a smooth glossy surface after gentle flaming.• Softens without becoming flaky or crumbly.

• Modelling of acrylic saddle supporting the teeth. • Vestibular parts of wax models of removable dentures.• For occlusal registration.• Pre form of jacket crowns.

500g (24 sheets), 1000g (48 sheets)

AVAILABLE PACKAGING

10 sticks (90 g)

13

To deliver a reliable and dimensionally stable wax bite registration you need a material carefully designed for this purpose. Simply warming up a piece of modelling wax, bending it into a U shape and asking a patient to bite down is not cost effective in the long term. Therefore, Brulon offers a proven cost efficient bite registration material, especially formulated to provide dentists with a dense yet easily softened bite wax that is stable at room temperature. The thickness has been carefully chosen to provide the most accurate registration.

S H E L L A C B A S E P L A T E

B I T E R E G I S T R A T I O N W A X

• Optimum heat resistance to minimize overheating of the plate.• Easily adaptable on heating and easy to work with. Thanks to it’s unique chemical properties.• Retains the shape stability after cooling down.• Optimum mechanical strength to resist breaking during try in dentures.• Does not adhere to plaster.

• Producing wax bite registration templates.• Custom impression trays for impressions of edentulous jaws.• Modelling work.

INDICATIONS

INDICATIONS• For reliable accurate bite registrations.

• Retains heat longer for efficient modelling.• Provides accuracy and details.• Good thickness (roughly 2.5mm).• Highly cost efficient.• Softens at 54o C.

AVAILABLE PACKAGING

Brulon Shellac Base Plates are high quality plates used as an intermediate in making prosthesis. Offers high mechanical strength due to optimum thickness.

PRODUCT OVERVIEW

PRODUCT OVERVIEW



8 Maxillary and 4 Mandibular in single box (around 2mm thickness, chocolate brown color).

AVAILABLE PACKAGING Silver grey color sheet - 250g (10 sheets), 500g (20 sheets), 1000g (40 sheets)

14

Used for boxing impressions prior to pouring the model. A tacky, flexible wax that results in perfect adhesion without the application of heat.

B O X I N G W A X

B E A D I N G W A X

S P A C E R W A X

PRODUCT OVERVIEW

PRODUCT OVERVIEW

Brulon Spacer Wax is used for increasing the thickness of wax rims while making dentures using base plates.

PRODUCT OVERVIEW

• Provides uniform thickness of impression material.• Prevents direct contact of acrylic trays with soft tissues.• 0.4mm thick Sheets.


• Adheres easily to most of the surfaces.


AVAILABLE PACKAGING

25 Sheets/ Box (shape of upper and lower base plates).

AVAILABLE PACKAGING Lemon Yellow Color Sheet - 6 inch (6 Sheets/ Box), 12 inch (6 Sheets/ Box)

Brulon Beading Wax is sticky enough to easily adapt at the edge of alginate impression by applying hand pressure.It creates the base of the cast. Also, preserves the outer portion of the cast.

AVAILABLE PACKAGING

Blue Color Sheet - 24 cm (5.5 mm thickness)- 2 Sheets/ Box

• Preserves the outer portion of the cast.• Easily adaptable at the periphery.


15

Brulon Digital Prosthetic SolutionsCAD/ CAM Explore the world of Digital Prosthetic Solutions through Brulon Discs, suitable for multiple indications. Available in various colors and heights.

B i o D i s c T E M P


• Excellent durability. Thanks to high abrasion stability due to use of high grade of raw materials.• Great milling reproduction details.• High flexural strength > 65 MPa • Compatibility: Open system (φ98.4mm), Z-95 mm system, A-71 mm system, L-72 mm system, S-system• Natural fluorescence. • Cost effective fabrication. • Absence of cracks & porosity.• Superior chromatic stability.• Burns out without a trace • Biocompatibility

PRODUCT OVERVIEW

BRULON BIODISC, are PMMA discs used for fabrication of fully or partially anatomical longer lasting Crown and Bridges. Manufactured with highly crosslinked acrylic which guarantees high detailed precision and resistance. The unique, carefully controlled polymer compressing technique ensures absence of cracks or porosity anywhere on the PMMA discs.

AVAILABLE SHADES:

- Available in 16 Brulon Classic Shades (A1-D4), bleach.- Available versions (A1-D4): Monochromatic layer & Multichromatic layer.- Clear Color for Implant drilling guide & occlusal splint (Night Guard).- Product kits available in 1 disc/pack.

AVAILABLE HEIGHTS:

10 mm, 12 mm, 14mm, 15mm, 16mm, 18mm, 20mm, 25mm, 30mm

16


• Fully or partially long-term temporary Crowns and Bridges.• Implant drilling guide & occlusal splint (Night Guard).

INDICATIONS

1023

/brulongroup

@brulongroup

C1/B, 908New G.I.D.C, Gundlav,

Valsad, 396 035,Gujarat, India

C1/B, 908New G.I.D.C, Gundlav,

Valsad, 396 035,Gujarat, India

[email protected]@brulon.inIS

O 1

34

85

:20

03

, IS

O 9

00

1:9

00

8 C

ert

ifie

dIS

O 1

34

85

:20

03

, IS

O 9

00

1:9

00

8 C

ert

ifie

d

[email protected]@hotmail.com

+91 9638 336 118+91 9638 336 118

+91 9664 792 596+91 9664 792 596

+91 2632 237118+91 2632 237118

BRULONGROUP

R

Brulon InternationalBrulon InternationalManufactured by

www.brulon.in

R R R R R R R R

R R R

Brulon International has been certified in accordance with European Directive 93/42/EEC, our following products bear the CE mark:

PERICERAM , PERIPLUS XL , PERISTAR V XL , PERILUX RXL , BIOROCK V XL , PERIROCK G XL , PRIMAFORM , PRIMAPAN XL , DRAVLON product range, ZAVLON product range and BIO DISC product range.

For more information on BRULON DENTAL SOLUTIONS, visit For more information on BRULON DENTAL SOLUTIONS, visit

Da

te o

f is

sue

of

this

in

form

ati

on

: 06

.17 (

Vers

ion

01)

Da

te o

f is

sue

of

this

in

form

ati

on

: 06

.17 (

Vers

ion

01)

© 2017 Brulon International. All Rights Reserved.© 2017 Brulon International. All Rights Reserved.

Brulon Catalogue Final 22.06

Documents

Transcript of Brulon Catalogue Final 22.06