_RoRo Conversions Brochure_ (Screen) Id 45313_Original_45313
Brochure #487K · Title: Brochure_#487K Author: choi Created Date: 2/26/2004 2:36:45 AM
Transcript of Brochure #487K · Title: Brochure_#487K Author: choi Created Date: 2/26/2004 2:36:45 AM
ac
ce
ss
or
ie
s
brochure #487K© Copyright 2004 Alltech Associates, Inc.UNP
3www.dongmyung.co.kr
GC Organizers
5-Column Storage Unit
” ” ”
Plastic Storage Box
10-Column Storage Unit
” ” ”
Utility Cabinet
” ” ” ” ” ”
Lab Storage Bin Unit
” ” ”
GC OrganizersDESCRIPTION PART NO.
5-Column Storage Unit 6390
10-Column Storage Unit 6392
Lab Storage Bin Unit 5242
Plastic Storage Box 803880
Utility Cabinet 6260
4
Pressure Regulators
Economy Brass RegulatorsDESCRIPTION CGA NO. PART NO.
H2, Ar/Methane 350 8101
He, N2, Ar, Ne 580 8103
Air 590 8104
Panel Mount Economy RegulatorDESCRIPTION CGA NO. PART NO.
Panel Mount Regulator - 81896
Panel Mounting Nut - 81895
Economy Brass Regulators
”
Panel Mount Economy Regulator
”
High Purity Stainless Steel RegulatorsDESCRIPTION CGA NO. PART NO.
H2, Ar/Methane 350 8109
He, N2, Ar, Ne 580 8111
Pressure GaugesDESCRIPTION CGA NO. PART NO.
0-30psig - 86800
0-60psig - 86802
0-100psig - 86804
0-200psig - 86808
High Purity Stainless Steel Regulators
”
Single Stage Pressure RegulatorsDESCRIPTION CGA NO. PART NO.
0-40psig - 81890
0-120psig - 81891
0-200psig - 81892
High Purity Stainless Steel Regulators
”
Pressure Gauges
This brochure contains asampling of our GCAccessories. For our completeline of chromatographyproducts, request AlltechCatalog 550 on enclosed card.
5www.dongmyung.co.kr
Eco-Mizer Standby ValveDESCRIPTION PART NO.
Eco-Mizer Standby Valve 7070
9-Way Cylinder WrenchDESCRIPTION PART NO.
9-Way Cylinder Wrench 412933
Eco-Mizer Standby Valve
”
9-Way Cylinder Wrench
Cylinder Safety HoldersDESCRIPTION PART NO.
Bench Top Model 37132
Bench Top Model with Safety Chain1 37214
Wall Mount Model 37133
Wall Mount Model with Safety Chain1 37215
Replacement Strap for Cylinder Holders 37134
Cylinder Status TagsDESCRIPTION PART NO.
Cylinder Status Tags, 25/pkg 8004
Cylinder Status Tags
Female ConnectorsCPI CPI
BRASS STAINLESS STEEL
DESCRIPTION QTY. PART NO. PART NO.
Female Pipe Thread Connectors
1/8" FPT to 1/8" tube Ea 60048 61048
1/4" FPT to 1/8" tube Ea 14071 61084
1/8" FPT to 1/4" tube Ea 60050 61050
1/4" FPT to 1/4" tube Ea 14072 61086
FPT Connectors
Gas Cylinder Accessories
1Safety chain is in addition to safety strap.
Cylinder Safety Holders
6
Moisture Traps
Moisture Traps
1Dimensions are measured Length x OD. Length is measured from endfitting to endfitting.
Moisture TrapsCAPACITY PRESSURE
PHOTO DESCRIPTION INDICATOR SIZE DIMENSIONS1 FITTING (ML) EFFICIENCY LIMIT (PSIG) PART NO.
A In-Line Moisture Trap Yes 120cc 13" x 1.25" 1/8" 12 <1ppm 100 8121
A In-Line Moisture Trap Yes 120cc 13" x 1.25" 1/4" 12 <1ppm 100 8125
A In-Line Moisture Trap Yes 400cc 14.5" x 2" 1/8" 33 <1ppm 100 8123
A In-LineMoisture Trap Yes 400cc 14.5" x 2" 1/4" 33 <1ppm 100 8128
B High Pressure Gas Drier No 200cc 11.5" x 1.5" 1/4" 27 <1ppm 1800 8113
C Traditional Hydro-Purge® Yes 120cc 9.9" x 1.5" 1/8" 13 <1ppm 100 14505
D Hydro-Purge II® Yes 120cc 8.6" x 1.5" 1/4" 19 <1ppm 100 14625
D Hydro-Purge II® Yes 200cc 12.8" x 1.5" 1/8" 27 <1ppm 100 14628
E Economy Moisture Trap Yes 200cc 9.75" x 2" 1/8" 31 <1ppm 100 8151
E Economy Moisture Trap Yes 200cc 9.75" x 2" 1/4" 31 <1ppm 100 8153
F BIG Moisture Trap No 750cc 17.5" x 2.4" 1/8" 130 <1ppm 250 7207
F BIG Moisture Trap No 750cc 17.5" x 2.4" 1/4" 130 <1ppm 250 7209
A - In-Line Moisture Trap
B - High Pressure Gas Drier
C - Traditional Hydro-Purge®
D - Hydro-Purge II®
E - Economy Moisture Trap
F - BIG Moisture Trap
7www.dongmyung.co.kr
Hydrocarbon Traps
Hydrocarbon Traps
1Also removes and indicates for moisture.2Efficiency applies to compounds >C4.
Hydrocarbon TrapsPRESSURE
PHOTO DESCRIPTION INDICATOR SIZE DIMENSIONS FITTINGS EFFICIENCY2 LIMIT (PSIG) PART NO.
A AT™-Indicating Hydrocarbon Trap Yes 120cc 10" x 1.5" 1/8" <3ppb 100 7210
A AT™-Indicating Hydrocarbon Trap Yes 120cc 10" x 1.5" 1/4" <3ppb 100 7212
B In-Line Activated Charcoal Trap N/A 120cc 13" x 1.25" 1/4" <100ppb2 100 8129
B In-Line Activated Charcoal Trap N/A 400cc 14.5" x 2" 1/4" <100ppb2 100 8131
C In-Line Hi-EFF® Organic Trap Yes1 400cc 14.5" x 2" 1/4" — 100 81350
D High Pressure Charcoal Trap N/A 200cc 11.5" x 1.5" 1/4" <100ppb2 1800 8117
E Hydrocarbon Trap N/A 200cc 13" x 1.5" 1/8" <40ppb2 250 14634
E Hydrocarbon Trap N/A 200cc 13" x 1.5" 1/4" <40ppb2 250 14633
F BIG Hydrocarbon Trap N/A 750cc 17.5" x 2.4" 1/8" <15ppb2 250 7201
F BIG Hydrocarbon Trap N/A 750cc 17.5" x 2.4" 1/4" <15ppb2 250 7203
F BIG Hydrocarbon Trap N/A 750cc 17.5" x 2.4" 1/2" <15ppb2 250 7205
A - NEW AT™-Indicating Hydrocarbon TrapThe ONLY Hydrocarbon Indicator Available!
B - In-Line Activated Charcoal
C - In-Line Hi-EFF® Organic Trap
D - High Pressure Charcoal Trap
E - Hydrocarbon Trap
F - BIG Hydrocarbon Trap
8
Oxygen Traps
OXY-MAX™ Oxygen Traps
1Requires cartridge base unit. For detailed explanation and ordering information, see page 7.2The AT™-Omni Cartridge removes oxygen, moisture and hydrocarbons.3Reducing ferrules are supplied for installation into 1/8" gas lines.
OXY-MAXTM Oxygen TrapsPRESSURE
CAPACITY LIMIT
FORMAT TYPE PHOTO DESCRIPTION INDICATOR DIMENSIONS FITTING (ML) EFFICIENCY (PSIG) PART NO.
Cartridge Format1
A AT™-Indicating OXY-MAX™ Cartridge Yes 13.2" x 1.5" — 104 <1ppb 100 81015
B AT™-Omni Cartridge2 Yes 13.2" x 1.5" — 48 <1ppb 100 81012
– Cartridge System Base Unit — — 1/4"3 — — — 81025
In-Line Format
C High Pressure OXY-MAX™ Oxy-Trap™ No 11.5" x 1.5" 1/4" 456 <1ppb 1800 8115
D OXY-MAX™ Oxy-Trap™ No 3.5"dia. coil 1/8" 133 <1ppb 100 4001
D OXY-MAX™ Oxy-Trap™ No 3.5"dia. coil 1/4" 133 <1ppb 100 4002
– Large OXY-MAX™ Oxy-Trap™ No 3.9" dia. coil 3/8" 206 <1ppb 100 4003
E Indicating OXY-MAX™ Oxy-Trap™ Yes 16" x 0.375" 1/4"3 20 <1ppb 100 4004
C - High Pressure OXY-MAX™ Oxy-Trap™
D - OXY-MAX™ Oxy-Trap™
E - Indicating OXY-MAX™ Oxy-Trap™A - AT™‚-Indicating
OXY-MAX™ CartridgeB - AT™-Omni
Cartridge
9www.dongmyung.co.kr
Gas Purifier Systems/Accessories
1Base Unit sold separately.2AT™-Omni Cartridge removes oxygen, moisture and hydrocarbons.3Reducing ferrules are supplied for installation into 1/8" gas lines.
AT™-Multi-Purge IIDESCRIPTION PART NO.
Multi-Purge II
with 1/8" Fittings 14565
with 1/4" Fittings 14564
AT™-Multi-Purge II
In-Line Particulate FiltersDESCRIPTION POROSITY PART NO.
In-Line Particulate Filters
1/4" In-line Filter 10µ 8052
1/8" In-line Filter 10µ 8054
In-Line Particulate Filter
Universal Mounting PanelDESCRIPTION QTY. PART NO.
Universal Mounting Panel Ea 7220
(clips sold separately)
Universal Mounting Clips
Fits 7/8" to 1" OD Traps 2/pkg 7221
Fits 1 1/8" to 1 3/8" OD Traps 2/pkg 7223
Fits 1 3/8" to 1 5/8" OD Traps 2/pkg 7225
Fits 1 5/8" to 1 7/8" OD Traps 2/pkg 7227
Fits 2" to 2 1/2" OD Traps 2/pkg 7229
Universal Mounting Panel
”
Brass Housing
10µ Stainless Steel Filter (inside)
Alltech Cartridge Gas Purification SystemDESCRIPTION FITTING PART NO.
Gas Purification Cartridges1
Moisture Trap Cartridge — 81005
Hydrocarbon Trap Cartridge — 81010
AT™-Omni Cartridge2 — 81012
AT™-Indicating OXY-MAX™ Cartridge — 81015
Base Unit
Cartridge System Base Unit 1/4"3 81025
17”W x 24”
Locking ring inbase unit
Alltech Cartridge Gas Purification Systems
10
Gas Flowmeters
Alltech Digital Flow Check™ Mass Flowmeters
’ ” ’ ”
DFC-HR™'s 0.01SCCM resolution is best for low
flow applications.
DFC™'s 0.1SCCM resolution is suitable for most gas applications.
Digital Flow Check™ FlowmetersDESCRIPTION PART NO.
Flowmeters
DFC™ 4700
DFC-HR™ 5700
Specifications for DFCTM and DFC-HRTM FlowmetersFlow Range: DFC™: 0.1-500SCCM autoranging (except CO2)
0.1-300SCCM autoranging for CO2
DFC-HR™: 0.01-500SCCM
Accuracy: DFC™: ±2% of reading or 0.1SCCM
DFC-HR™: ±2% of reading or 0.01SCCM (for range
of 0.01 to 9.99 SCCM), 0.1SCCM (for
range of 10 to 500 SCCM)
Calibration: He, H2, N2, O2, CO2, Air, Ar/CH4 (5%)
Sensor Type: Solid-state mass flow, silicon on ceramic
Display: 16-character alphanumeric LCD, autoranging
Power: 9V alkaline battery (included), auto-off function,
low battery warning
11www.dongmyung.co.kr
Gas Flowmeters and Leak Detectors
1Includes charger.
Soapfilm FlowmetersDESCRIPTION PART NO.
Flowmeters
1cc 4041
10cc 4042
25cc 4043
100cc 4045
1000cc 4047
Accessories
Magnetic Clamps, 2/pkg 4044
5/16” OD Tygon Tubing, 10ft 4333
Soapfilm Flowmeter
Helium Gas Leak DetectorDESCRIPTION PART NO.
In-Line Particulate Filters
Alltech Helium Leak Detector, 120V1 60229
Alltech Helium Leak Detector, 220V1 60231
StopwatchDESCRIPTION PART NO.
Stopwatch 4069
Universal Mounting Panel
Leak-Check™DESCRIPTION QTY. PART NO.
Leak-Check™, 8oz Ea 2025 12 2026
Leak-Check™
Alltech Helium Leak Detector
12
Septa
1Use plug type septa.
XLB SeptaSIZE (OD) QUT. PART NO.
XLB Septa
1/4" (6mm) 50 15427
3/8" (9.5mm) 50 15428
7/16" (11mm) 50 15429
1/2" (12.5mm) 50 15430
21/32" (17mm) 50 15039
XLB Septa
ThermoRed SeptaSIZE (OD) QUT. PART NO.
ThermoRed Septa
1/4" (6mm) Plug Type 25 15134
11/32" (9mm) 25 15129
3/8" (9.5mm) 25 15131
7/16" (11mm) 25 15132
1/2" (12.5mm) 25 15141
21/32" (17mm) 25 15133
ThermoRed Septa
XLB SeptaSIZE (OD) QUT. PART NO.
XLB Septa
1/4" (6mm) 50 15427
3/8" (9.5mm) 50 15428
7/16" (11mm) 50 15429
1/2" (12.5mm) 50 15430
21/32" (17mm) 50 15039
HT-X Septa
Size SpecificationsSize Chromatograph
1/4" Shimadzu1, SRI1
(6mm)
3/8" Finnigan 9100, 9600, Agilent/HP 5700, 5880 & 5900,
(9.5mm) Varian (except capillary inj.), Tracor 550, 560
7/16" Agilent/HP 5890,6850,6890, PE Sigma, 900, 990, 3920,
(11mm) 8300, 8400, 8500 Autosys, Varian 1078/1079, SPI, &
capillary injectors
1/2" Fisons/Carlo Erba, Finnigan 9500, Agilent 5750, & earlier
(12.5mm) models, Tracor 220, 222, 5402
1/32" Fisons/Carlo Erba 8000 Series, & TRACE
(17mm)
Septum RemoverDESCRIPTION PART NO.
Septum Remover 24030
Septum Remover
General Purpose Blue SeptaSIZE (OD) QUT. PART NO.
General Purpose Blue Septa
1/4" (6mm) 100 6512
3/8" (9.5mm) 100 6514
3/8" (9.5mm) 10 x 100 65142
7/16" (11mm) 100 6518
7/16" (11mm) 10 x 100 65182
1/2" (12.5mm) 100 6520
1/2" (12.5mm) 10 x 100 65202
General Purpose Blue Septa
13www.dongmyung.co.kr
JADE™ Inlet
1With proper use. Excludes biyearly needle guide replacement 2Other makes and models available.
JADE™ Inlet
JADE™ Inlet2
0.47MM 0.63MM
FOD GC: PART NO. PART NO.
Agilent/HP
5880/5890/6890 Split/Splitless 9764 9778
5880/5890/6890 Packed 9762 9776
5710/5790 Packed 9774 9788
5700 Capillary, 5993 GC/MS 9764 9778
5890 Purged/Packed 9909 9683
Agilent/HP Autosamplers
7673A&B Split/Splitless — 9925
7673A&B Packed — 9927
7673A&B Purged/Packed — 9198
Perkin Elmer
2000/8300/8700/8500 Sigma Series 9774 9788
Shimadzu
17A Split/Splitless 7268 8014
Varian
1075/1077/1078/1079 Split/Splitless 9768 9786
1075/1077/1078/1079 Split/Splitless 9193 9195
with Trigger
1093/1094 SPI Injector with Trigger 9689 9699
3400/3700 Capillary, 1cm Septum 9768 9786
3400/3700 Capillary, 8mm Septum 9748 9734
3300 Capillary 9768 9786
Tapered needle guideinsures effective primary
seal, reproducible needlepositioning and injection
ease.
Finned valve cap designmaximizes convective
heat transfer.
Highly sphericalprecision
balls provide perfectsealing.
“No-bleed” high-tempgasket seals off GC
inlet port.
Anodized finish offerswear resistance.
Special alloy magnetassures maximum ballreturn force.
Precision-groundsapphire seatfor optimum sealing.
Patented two-ball designguarantees no jammingand minimum sealingtime.
14
Injection Port Liners
JADE™ Inlet2
EACH 5/PKG 25/PKGDESCRIPTION AND LENGTH X OD PART NO. PART NO. PART NO.
Injection Liners for Agilent/HP Instruments
Cup Splitter 4825 4827 4829
78.5 x 6.3mm
Split/Splitless with Deactivated Quartz Wool, 4906 4924 4928
78.5 x 6.3mm OD, 4mm ID
Splitless, 4929 4934 4936
78.5 x 6.3mm OD, 4mm ID
Quartz Splitless, 4962 4963 4964
78.5 x 6.0mm, 2mm ID
Recessed Gooseneck with Deactivated 4959 4960 4961
Quartz Wool, 78.5 x 6.3mm, 4mm ID
Recessed Gooseneck, 4958 4938 4957
78.5 x 6.3mm, 2mm ID
Direct, 4967 4968 4969
78.5 x 6.3mm, 1.5mm ID
Injection Liners for Varian Instruments
Splitter with Deactivated Quartz Wool, 4970 4971 4972
1075/1077, 72 x 6.3mm, 4mm ID
Frit Splitter, 4973 4974 4975
1075/1077, 72 x 6.3mm, 4mm ID
Splitless 1075/1077, 4980 4981 4982
74 x 6.3mm, 2mm ID
0.8mm SPI 1093/1094, 4983 4984 4985
54 x 4.6mm
0.5mm SPI 1093/1094, 4986 4987 4988
54 x 4.6mm
SPI with Buffer 1093/1094, 4989 4990 4991
54 x 4.6mm
Injection Liners for Perkin-Elmer Instruments
Split/Splitless 8500, 8600, 4790 4792 4794
100 x 5.0mm, 3mm ID
Splitless 8500, 8600, 4992 4993 4994
100 x 5.0mm, 2mm ID
PTV Liner 8500, 8600, 4995 4996 4997
88 x 2.0mm, 1mm ID
Split/Splitless Autosystem, 4796 4798 4800
92 x 5.8mm, 4mm ID
Split/Splitless Autosystem, 4810 4812 4814
92 x 5.8mm, 2mm ID
15www.dongmyung.co.kr
Injection Port Liners & O-rings
GC O-rings
GC O-ringsSIZE QTY. PART NO.
Graphite O-rings
1/4" (6.5mm ID) 10 7160
1/4" (6.35mm ID) 10 7176
Silicone O-rings
1/8" 100 7020
3/16" 100 7021
1/4" 100 7022
Teflon® O-rings
1/8" 100 7023
3/16" 100 7024
1/4" 100 7025
Viton® O-rings
1/8" 100 7017
3/16" 100 7018
1/4" 100 7019
Deactivated Injection LinersEACH 5/PKG 25/PKG
DESCRIPTION AND LENGTH X OD PART NO. PART NO. PART NO.
Injection Liners for Shimadzu Instruments
Split 17A with Deactivated Quartz 4748 4750 4752
Wool, 95.5 x 5.0mm, 3mm ID
Splitless 17A, 4754 4756 4758
95.5 x 5.0mm, 3mm ID
Gooseneck/Splitless, 4760 4762 4764
95.5 x 5.0mm, 3mm ID
Split 9A, 15A, 16A, 4766 4768 4770
127.5 x 5.0mm, 3mm ID
Splitless 9A, 15A, 16A, 4772 4774 4776
127.5 x 5.0mm, 3mm ID
Injection Liners for Carlo Erba-Fisons Instruments
Split/Splitless 6000 Series with Deactivated 4742 4744 4746
Quartz Wool, 79.5 x 5.0mm, 3mm ID
Split 8000 Series, 4784 4786 4788
105 x 8.0mm, 3mm ID
Specifications for GC O-ringsPROPERTY GRAPHITE SILICONE TEFLON® VITON®
Max. Temp. 450ºC 300ºC 260ºC 350ºC
Chem. Rest. Good Good Superb Superb
Durability Superb Moderate Superb Good
Bleed None Medium Low Low
Color Black Red White Black
16
SeptaColumn Care
Universal Guard Column KitsDESCRIPTION PART NO.
Universal Guard Column Kits
0.53mm Universal Guard Column Kit 13992
0.32mm Universal Guard Column Kit 13998
0.25mm Universal Guard Column Kit 14005
Universal Guard Column Kits
Deactivated Fused Silica TubingID LENGTH PART NO.
0.18mm 10m 602026
0.18mm 20m 602028
0.18mm 40m 602029
0.25mm 15m 602915
0.25mm 30m 602930
0.25mm 60m 602960
0.32mm 15m 603915
0.32mm 30m 603930
0.32mm 60m 603960
0.53mm 15m 605915
0.53mm 30m 605930
0.53mm 60m 605960
Deactivated Fused Silica Tubing
Universal Capillary ConnectorsDESCRIPTION QUT. PART NO.
Universal Connectors
Universal Straight Connector 5 20400
Universal Straight Connector 25 20401
Universal Y-Connector 1 20405
Accessories
Polyimide Sealing Resin 5g 5825
Universal Capillary Connectors
Universal Straight Connector
Premium Glass Wool
Premium Glass WoolDESCRIPTION QUT. PART NO.
Glass Wool
Untreated Glass Wool 50g 4035
Silane Treated Glass Wool 50g 4037
Quartz Wool 10g 4033
Silane Treated Quartz Wool 10g 4233
Pesticide Grade Glass Wool 10g 4034
17www.dongmyung.co.kr
Tubing
AT™-Steel TubingDESCRIPTION LENGTH PART NO.
1/16" OD x 0.010" ID 6' 11060
1/16" OD x 0.020" ID 6' 11064
1/16" OD x 0.030" ID 6' 11068
1/16" OD x 0.040" ID 6' 11072
1/8" OD x 0.085" ID 6' 11076
1/4" OD x 0.210" ID 6' 11092
AT™ Steel — Activity Tested Steel Tubing
Nickel TubingDESCRIPTION LENGTH PART NO.
1/8" OD x 0.083" ID 50' 3080
1/4" OD x 0.210" ID 50' 3081
AT™-Steel Tubing
Teflon®-Coated Stainless Steel TubingDESCRIPTION LENGTH PART NO.
1/8" OD x 0.085" ID 50' 3142
1/4" OD x 0.210" ID 50' 3144
Teflon®-Coated Stainless Steel Tubing”
Regular Grade Stainless Steel TubingMATERIAL DIMENSIONS LENGTH PART NO.
Type 316 1/16" OD x 0.020" ID per meter 300230
1/16" OD x 0.020" ID 50' coil 3002
1/16" OD x 0.030" ID per meter 300030
1/16" OD x 0.030" ID 50' coil 3000
1/16" OD x 0.040" ID per meter 30033
1/16" OD x 0.040" ID 50' coil 3003
Type 304 1/8" OD x 0.085" ID per meter 30103
1/8" OD x 0.085" ID 50' coil 3010
1/4" OD x 0.210" ID per meter 30303
1/4" OD x 0.210" ID 50' coil 3030
Hi-EFF® Grade Stainless Steel TubingMATERIAL DIMENSIONS LENGTH PART NO.
Type 316 1/8" OD x 0.085" ID per meter 30107
1/8" OD x 0.085" ID 50' coil 30109
1/4" OD x 0.210" ID per meter 30308
1/4" OD x 0.210" ID 50' coil 30309
Type 304 1/8" OD x 0.085" ID per meter 30104
1/8" OD x 0.085" ID 50' coil 30106
1/4" OD x 0.210" ID per meter 30304
1/4" OD x 0.210" ID 50' coil 30306
Stainless Steel Tubing
Hi-EFF® Grade Stainless Steel Tubing
Copper TubingDESCRIPTION LENGTH PART NO.
1/8" OD x 0.065" ID 50' 3040
1/4" OD x 0.190" ID 50' 30609
Copper Tubing
18
GC FittingsCPI CPI
BRASS STAINLESS STEEL
PHOTO - DESCRIPTION QTY. PART NO. PART NO.
A - Nuts
1/16" 10 14057 141575
1/8" 10 14058 14158
1/4" 10 14059 14159
B - Ferrules
1/16" 10 14060 141605
1/8" 10 14061 14161
1/4" 10 14062 14162
C - Tees
1/16" Ea 14075 14175
1/8" Ea 14053 14176
1/4" Ea 14077 14177
D - Unions
1/16" Ea 14063 14163
1/8" Ea 14065 14165
1/4" Ea 14068 14168
E - Capillary Union
1/16" Ea — 28812
F - Reducing Unions
1/8" to 1/16" Ea 14064 14164
1/4" to 1/16" Ea 60026 14166
1/4" to 1/8" Ea 60028 61028
1Use with graphite ferrules 1547901 or 1548001.2Use with ferrules on page 17.3for 0.25 and 0.32mm ID capillary column. 4for 0.45 and 0.53mm ID capillary column.
GC FittingsCPI CPI
BRASS STAINLESS STEEL
PHOTO - DESCRIPTION QTY. PART NO. PART NO.
G - Bulkhead Unions
1/16" Ea 51017 55117
1/8" Ea 55018 55118
1/4" Ea 55020 55120
H - Plugs
1/16" Ea 14054 14154
1/8" Ea 14055 14155
1/4" Ea 14066 14156
GC FittingsPHOTO - DESCRIPTION QTY. PART NO.
I - Capillary Nuts1 2 154780
I - Deep Well Capillary Nuts2 2 154781
J - Wrench-Free Capillary Nuts1 2 154785
J - Wrench-Free Deep Well Nuts2 2 154782
K - Reducing Nut 1 15145
L - Inlet Seal, stainless steel (0.8mm hole) 1 15146
M - Inlet Seal, gold plated (0.8mm hole) 1 15147
N - Washers, stainless steel (0.375" OD) 10 15148
O - Graphite Ferrules, 1/16" to 0.5mm hole3 10 1547901
O - Graphite Ferrules, 1/16" to 1.0mm hole4 10 1548001
P - MSD Source Nut, brass 1 15104
GC Fittings
C
I J
A B C D E
F
K L M N O P
G H
19www.dongmyung.co.kr
GC Ferrules
GC Ferrules
GC Ferrule PropertiesRESEALING
MATERIAL TEMP. LIMIT REUSABILITY PROPERTIES
Graphite 450°C Good Excellent
Vespel® 350°C Excellent Good
Vespel®/Graphite VG1 400°C Excellent Good
Vespel®/Graphite VG2 400°C Excellent Good
1/16" FerrulesDESCRIPTION QUT. PART NO.
1/16" Graphite Ferrules
1/16" to 0.4mm 10 RF-100/0.4-G
1/16" to 0.5mm 10 RF-100/0.5-G
1/16" to 0.5mm for HP/Agilent Nuts 10 1547901
1/16" to 0.8mm 10 RF-100/0.8-G
1/16" to 1.0mm 10 RF-100/1.0-G
1/16" to 1.0mm for HP/Agilent Nuts 10 1548001
1/16" Straight 10 SF-100-G
1/16" VG1 Ferrules
1/16" to 0.4mm 10 100/0.4-VG1
1/16" to 0.5mm 10 100/0.5-VG1
1/16" to 0.8mm 10 100/0.8-VG1
1/16" Straight 10 SF-100-VG1
1/16" VG2 Ferrules
1/16" to 0.4mm 10 100/0.4-VG2
1/16" to 0.5mm 10 100/0.5-VG2
1/16" to 0.8mm 10 100/0.8-VG2
1/16" Straight 10 SF-100-VG2
1/16" Vespel Ferrules
1/16" to 0.4mm 10 RF-100/0.4-V
1/16" to 0.5mm 10 RF-100/0.5-V
1/16" to 0.8mm 10 RF-100/0.8-V
1/16" Straight 10 SF-100-V
1/8" FerrulesDESCRIPTION QUT. PART NO.
1/8" Graphite Ferrules
1/8" to 0.4mm 10 RF-200/0.4-G
1/8" to 0.5mm 10 RF-200/0.5-G
1/8" to 0.8mm 10 RF-200/0.8-G
1/8" to 1/16" 10 RF-200/100-G
1/8" Straight 10 SF-200-G
1/8" VG1 Ferrules
1/8" to 0.8mm 10 200/0.8-VG1
1/8" to 1/16" 10 200/100-VG1
1/8" Straight 10 SF-200-VG1
1/8" VG2 Ferrules
1/8" to 0.8mm 10 200/0.8-VG2
1/8" to 1/16" 10 200/100-VG2
1/8" Straight 10 SF-200-VG2
1/8" Vespel Ferrules
1/8" to 1/16" 10 RF-200/100-V
1/8" Straight 10 SF-200-V
1/4" FerrulesDESCRIPTION QUT. PART NO.
1/4" Graphite Ferrules
1/4" to 1/16" 10 RF-400/100-G
1/4" to 1/8" 10 RF-400/200-G
1/4" Straight 10 SF-400-G
1/4" VG1 Ferrules
1/4" to 1/16" 10 400/100-VG1
1/4" to 1/8" 10 400/200-VG1
1/4" to 6mm 10 400/6MM-VG1
1/4" Straight 10 SF-400-VG1
1/4" VG2 Ferrules
1/4" to 1/16" 10 400/100-VG2
1/4" to 1/8" 10 400/200-VG2
1/4" to 6mm 10 400/6MM-VG2
1/4" Straight 10 SF-400-VG2
1/4" Vespel Ferrules
1/4" to 1/16" 10 RF-400/100-V
1/4" to 1/8" 10 RF-400/200-V
1/4" Straight 10 SF-400-V
www.alltechWEB.com
© Copyright 2003 Alltech Associates, Inc.
Alltech reserves the right to change prices and/or specifications without prior notification
Printed in the USA.
The trademarks referred to here in arethe property of their respective owners.
The trademarks referred to herein are the property of their respective owners.
Tools
ToolsDESCRIPTION QUT. PART NO.
20X Folding Magnifier with Case Ea 3163
Capillary Tool Kit Ea 16879
Wrench, 1/4" x 5/16", for 1/16" Nuts Ea 1998
Wrench, 7/16" x 1/2", for 1/8" & 3/16" Nuts Ea 1999
Wrench, 9/16" x 5/8", for 1/4" x 3/8" Nuts Ea 2000
Flame Checker Ea 7047
Fused Silica Cutter 5 3194
Plier-Type Tubing Cutter Ea 3169
Rotary Tubing Cutter Ea 3165
Replacement Cutting Wheels 3 3167
Plastic Tubing Cutter Ea 3206
Replacement Blade Ea 35903
Tubing Reamer Set1, 1/16" Ea 13974
Tubing Inner Reamer, 1/8"-3/8" Ea 32159
Tubing Outer Reamer, 1/8" Ea 32199
20X Folding Magnifierwith Case
Rotary Tubing Cutter” ”
Plastic Tubing Cutter
Tubing Reamers
Capillary Tool Kit
Open-End Wrench” ”
Flame Checker
Fused Silica Cutter
Fused Silica Cutter”
11Set includes Inner and Outer Reamer.