BRILEX - CMC Technologies · 2015. 3. 31. · The requirements by VDI 3673, EN 14491 and NFPA68...
Transcript of BRILEX - CMC Technologies · 2015. 3. 31. · The requirements by VDI 3673, EN 14491 and NFPA68...
1
BRILEX protection systemsfor explosions:
Explosion VentsIndoorVents
More than 20 years
of experience!
BRILEXExplosion Protection
How long can you stay cool?
Isolation ValvesExplosion Diverters
2
Responsible for contents:BRILEX Gesellschaft für Explosionsschutz mbHHinterm Gallberg 15-17D-59929 Brilon / DeutschlandPhone: +49 (0) 2961/9 66 29 - 0Fax: +49 (0) 2961/9 66 29 - [email protected]
Registered by The Chamber of Commerce, Amtsgericht Brilon – Register-Nr.HRB 3764, UST.-ID-NUMMER: DE 161 562 004
BRILEXExplosion Protection
3
BRILEX is specialised in the production and sales of explosion venting and isolation equipment.
BRILEX Gesellschaft für Explosionsschutz mbH was established in Brilon in November 1993.It erected its own first building, which helped considerably increase production, in 1996. Today, after two extensions to the premises, the Company now has around 5000 m2 of office, production and warehouse space at its disposal. BRILEX is currently staffed by 15 employees.
International contacts, created shortly after the company was founded, led to the first sales agencies being established in other countries. The international network has continued to grow since then and has resulted in the Company having to quickly and efficiently adapt to new markets, which it has been able to do with the help of its development and production departments.
BRILEX products are protective systems that safeguard production processes all over the world from the destructive power of dust explosions. The manufacture of such sensitive systems require production processes that both comply with international standards and directives and that meet the requirements set out by several different quality assurance systems. Many of the Company's explosion vents and flameless pressure relief systems have been awarded international patents.
The Company is currently working on bidirectional decouplingsystems that deliver considerable flow benefits over conventionalunits.
BRILEX is a leading manufacturer with its unique patented explosion vent delivering 100% pressure relief capacity and its flameless relief systems utilising replacement sets that allow them to be reused after explosions.
More than 20 years of experience in the field of safety engineering has allowed the Company to specialise in the provision of protection against dust explosions. As an innovativeand reliable partner, BRILEX protects its customers all over the world from the effects of dust and gas explosions. We see ourselves as a partner to our customers and we guarantee to satisfy their needs with advice, quality and reliable deliveries.
Milestones
Established in 1993
First office and production building erected in 1996;sales agencies set up in other countries in thesame year
Patent awarded for a bursting disc with 100% reliefcapacity in 1999
Patent awarded for a reusable, flameless pressurereliefsystem in 2003
Introduction of non-return valves for decoupling dustexplosions in 2006
Index
BRILEX-Agencies .............................................................................................................................................................................4
BRILEX-Explosion Vents...................................................................................................................................................................5
BRILEX-GE........................................................................................................................................................................................6
BRILEX-KE .......................................................................................................................................................................................7
BRILEX-KER .....................................................................................................................................................................................8
BRILEX-Accessories..........................................................................................................................................................................9
BRILEX-IndoorVent IV ....................................................................................................................................................................10
BRILEX-IndoorVent EXL .................................................................................................................................................................11
BRILEX Explosion Isolation Valves BPF-M and RSK......................................................................................................................12
BRILEX Explosion Diverters ...........................................................................................................................................................14
noitcetorP tneicfifE
4
Foreign AgenciesForeign Agencies
Australia and New ZealandCMC Technologies PTY LimitedContact Con CarpisUnit 19, 77 Bourke RoadAlexandria, NSW, 2015
Phone 0061-2-9669-4000Fax 0061-2-9669-4111E-mail [email protected]
noitcetorP tneicfifE
5
BRILEX Explosion VentsBRILEX Explosion Vents combine safety and shorter opening times. The light-weight and simple construction guarantees a quick and safe opening of the vent. The higher service life enables their use under the hardest conditions. This can be as high as a "sixty-fold" benefit compared to traditional triple section designs that are now "out-of-date".
Dust Explosion VentingVenting of dust explosions has been practiced for more than 50 years and provides the best protection for facilities where dust explosions can occur. When specifying explosion vents, the immense impact of pressure waves and flame propagation in the outside area need to be considered. Explosion relief must therefore be directed to a safe area.
GeneralBRILEX Explosion Vents are specially designed for relief of dust explosions. By early relief of an incipient explosion, BRILEX Explosion Vents protect people and industry worldwide.
Designs and ApplicationsBRILEX provides the appropriate explosion vent depending on the application. The wide range of vents available is dividedinto three standard types that can be adapted for the customer's specific requirements.
Explosion venting - how long can you stay cool?BRILEX- Explosion Vents ensure your safety!
Efficient Vent
Certificates
Guidelines and CertificatesThe basis for our controlled quality is the quality management system according to DIN ISO 9001:2008. All products are examined and certificated according to 94/9/EC. The requirements by VDI 3673, EN 14491 and NFPA68 have been met. All products are in agreement with CE and are labeled appropriately.
Approvals and DocumentationEach batch of explosion vents is tested in the factory according to EN 14797. Burst tests are witnessed by BRILEX Quality Control (QC) personnel or on request by independently accredited third parties such as TUV or others. The vents are then tagged by BRILEX QC personnel. Works test certificates (burst test certificates) will generally be provided for all productsaccording to EN 10204 3.1 B.
We advise and support you! We advise and support you!
BRILEX Explosion Vents
6
Filter installations with pneumatic cleaning systems and a very high vacuum operation require an explosion vent that withstands vacuum and positive pressure cycling for a long time. For such requirements the BRILEX-GE is the best choice. Its domed design enables negative pressure resistance without the need for an extra vacuum support.Standard GE features are pressure spike control and integrated flange gaskets.
BRILEX-GE
Dimensions
Dimensions
Rectangular Dimensions: (Typ: GE)
Round Dimensions:(Typ: GE)
Inside Dim(mm)
Outside Dim(mm)
Vent Area(cm²)
229 x 229 309 x 309 510
205 x 290 285 x 370 580
229 x 305 309 x 385 680
150 x 600 230 x 680 880
220 x 420 300 x 500 900
340 x 385 400 x 445 1280
305 x 457 385 x 537 1380
247 x 610 327 x 690 1450
340 x 440 400 x 500 1480
300 x 620 380 x 700 1860
320 x 640 380 x 700 2000
490 x 490 570 x 570 2370
DNInside
Dim (m)Outside
Dim (mm)Vent Area
(cm²)
Also available for DIN 2632 flanges.
600 596 676 2650
700 696 776 3650
750 762 842 4400
800 797 877 4800
900 894 974 6000
1000 995 1075 7600
1100 1124 1214 9850
DNInside
Dim (m)Outside
Dim (mm)Vent Area
(cm²)
200 208 268 300
250 261 341 480
300 310 390 680
350 342 422 830
400 393 473 1213
450 465 545 1600
500 494 574 1820
Inside Dim(mm)
Outside Dim(mm)
Vent Area(cm²)
Other sizes on request.
750 x 750 830 x 830 5600
750 x 840 830 x 920 6250
801 x 801 880 x 880 6400
610 x 1118 690 x 1198 6750
645 x 1130 725 x 1210 7280
720 x 1020 800 x 1100 7300
920 x 920 1000 x 1000 8400
915 x 1118 995 x 1198 10000
1020 x 1020 1100 x 1100 10400
1130 x 1130 1220 x 1220 12500
Inside Dim(mm)
Outside Dim(mm)
Vent Area(cm²)
375 x 655 455 x 735 2400
470 x 610 550 x 690 2800
490 x 590 570 x 670 2850
525 x 668 645 x 788 3400
610 x 610 690 x 690 3650
457 x 890 537 x 970 4050
620 x 670 680 x 730 4100
645 x 645 735 x 735 4100
653 x 653 733 x 733 4200
520 x 1020 600 x 1100 5250
586 x 920 666 x 1000 5350
500 x 1100 580 x 1180 5400
Efficient Vent
Explosion venting - how long can you stay cool?BRILEX- Explosion Vents ensure your safety!
7
If the negative pressure is not greater than 60% of the rated rupture pressure, installation of a domed vent has no extra benefit. For this application the KE is an alternative to the domed GE. The BRILEX - KE provides long durability and aerodynamic advantages compared to the domed type, for example in cyclones. Pressure spike control, integrated flange gaskets, cross rib and folded edges are standard KE design features.
BRILEX-KE
Dimensions
Rectangular Dimensions: (Typ: KE)
110 x 290 170 x 350 300
229 x 229 309 x 309 510
205 x 290 285 x 370 580
229 x 305 309 x 385 680
150 x 600 230 x 680 880
220 x 420 300 x 500 900
340 x 385 400 x 445 1280
305 x 457 385 x 537 1380
247 x 610 327 x 690 1450
340 x 440 400 x 500 1480
410 x 410 490 x 490 1650
300 x 620 380 x 700 1860
320 x 640 380 x 700 2000
319 x 765 399 x 845 2350
490 x 490 570 x 570 2370
375 x 655 455 x 735 2400
390 x 620 470 x 700 2400
445 x 597 525 x 677 2600
470 x 610 550 x 690 2800
Inside Dim(mm)
Outside Dim(mm)
Vent Area(cm²)
490 x 590 570 x 670 2850
420 x 770 500 x 850 3200
247 x 1345 327 x 1425 3300
525 x 668 645 x 788 3400
610 x 610 690 x 690 3650
247 x 1645 327 x 1725 4050
457 x 890 537 x 970 4050
620 x 670 680 x 730 4100
645 x 645 735 x 735 4100
653 x 653 733 x 733 4200
669 x 669 735 x 735 4350
630 x 730 710 x 810 4550
520 x 1020 600 x 1100 5250
586 x 920 666 x 1000 5350
500 x 1100 580 x 1180 5400
750 x 750 830 x 830 5600
420 x 1420 500 x 1500 5950
629 x 1004 689 x 1064 6000
750 x 840 830 x 920 6250
Outside Dim(mm)
Vent Area(cm²)
Inside Dim(mm)
Other sizes on request.
801 x 801 880 x 880 6400
500 x 1350 580 x 1430 6700
610 x 1118 690 x 1198 6750
645 x 1130 725 x 1210 7280
720 x 1020 800 x 1100 7300
920 x 920 1000 x 1000 8400
970 x 970 1050 x 1050 9400
1000 x 1000 1080 x 1080 10000
586 x 1727 666 x 1807 10000
915 x 1118 995 x 1198 10000
1020 x 1020 1100 x 1100 10400
790 x 1340 870 x 1420 10500
720 x 1670 800 x 1750 12000
1130 x 1130 1220 x 1220 12500
920 x 1380 1000 x 1460 12500
1130 x 1520 1220 x 1610 17150
1130 x 1727 1230 x 1827 19200
1000 x 2000 1080 x 2080 19500
Vent Area(cm²)
Inside Dim(mm)
Outside Dim(mm)
Efficient Vent
Explosion venting - how long can you stay cool?BRILEX- Explosion Vents ensure your safety!
8
BRILEX-KER
Dimensions
BRILEX provides explosion vents called KER, for simple applications in powder handling and storage. The KER is suitable for plant equipment with static over or under pressure conditions up to 50% of the rated rupture pressure. Edge reinforcement in its design allows the KER to be mounted without an outlet flange. Cross rib and folded edges are other standard KER design features.
Rectangular Dimensions: (Typ: KER)
Inside Dim(mm)
Outside Dim(mm)
Vent Area(cm²)
110 x 290 170 x 35 300
229 x 229 309 x 309 510
205 x 290 285 x 370 580
229 x 305 309 x 385 680
150 x 600 230 x 680 880
220 x 420 300 x 500 900
315 x 410 365 x 460 1250
340 x 385 400 x 445 1280
305 x 457 385 x 537 1380
247 x 610 327 x 690 1450
340 x 440 400 x 500 1480
400 x 400 500 x 500 1550
410 x 410 490 x 490 1650
300 x 600 350 x 650 1800
300 x 260 380 x 700 1860
320 x 640 380 x 700 2000
319 x 765 399 x 845 2350
490 x 490 570 x 570 2370
375 x 655 455 x 735 2400
390 x 620 470 x 700 2400
445 x 597 525 x 677 2600
470 x 610 550 x 690 2800
Outside Dim(mm)
Vent Area(cm²)
Inside Dim(mm)
490 x 590 570 x 670 2850
420 x 770 500 x 850 3200
247 x 1345 327 x 1425 3300
252 x 668 645 x 788 3400
600 x 600 650 x 650 3600
610 x 610 690 x 690 3650
247 x 1645 327 x 1725 4050
457 x 890 537 x 970 4050
620 x 670 680 x 730 4100
645 x 645 735 x 735 4100
653 x 653 733 x 733 4200
669 x 669 735 x 735 4350
630 x 730 710 x 810 4550
620 x 820 675 x 875 5000
520 x 1020 600 x 1100 5250
586 x 920 666 x 1000 5350
500 x 1100 580 x 1180 5400
750 x 750 830 x 830 5600
420 x 1420 500 x 1500 5950
629 x 1004 689 x 1064 6000
750 x 840 830 x 920 6250
800 x 800 850 x 850 6400Other sizes on request.
Vent Area(cm²)
Inside Dim(mm)
Outside Dim(mm)
801 x 801 880 x 880 6400
500 x 1350 580 x 1430 6700
610 x 1118 690 x 1198 6750
645 x 1130 725 x 1210 7280
720 x 1020 800 x 1100 7300
920 x 920 1000 x 1000 8400
940 x 940 1000 x 1000 8800
970 x 970 1050 x 1050 9400
1000 x 1000 1080 x 1080 10000
1000 x 1000 1050 x 1050 10000
586 x 1727 666 x 1807 10000
915 x 1118 995 x 1198 10000
1020 x 1020 1100 x 1100 10400
790 x 1340 870 x 1420 10500
720 x 1670 800 x 1750 12000
1130 x 1130 1220 x 1220 12500
920 x 1380 1000 x 1460 12500
940 x 1440 1000 x 1500 13500
1130 x 1520 1220 x 1610 17150
1130 x 1727 1230 x 1827 19200
1000 x 2000 1080 x 2080 19500
Efficient Vent
Explosion venting - how long can you stay cool?BRILEX- Explosion Vents ensure your safety!
9
GasketsAll vents are supplied with "factory-installed" integrated flange gaskets. The standard material is EPDM and can be used from -40 °C to +120 °C. As an alternative the following standard materials are available:
White Silicone -50 °C to +200 °CKlinger -100 °C to +400 °CCeramic -100°C to +900 °COther materials can be supplied on request.
InsulationInsulation consists of a fire-proof mineral wool according to DIN 1259. The insulation is directly mounted to the "vent-side" of the explosion vent and is protected by a light-weight aluminium cover with a water-tight seal. It is secured to the disc to prevent it from flying away during venting. BRILEX insulation does not have any affect on the venting relief capability or efficiency. This has been proved by notified bodies in many dynamic explosion tests. Optional insulation thickness can be supplied to meet the customer's specifications.
Mounting FramesThe necessary outlet flange for types GE / KE can also be supplied. The following material is available: Zinc plated carbon steel or stainless steel.
Burst SensorTo monitor an installation a burst sensor type SE can be installed. The sensor signals the opening of the explosion vent so that equipment such as fans or rotary valves can be switched off. SE sensors are installed separately and just above the explosion vent. This enables SE sensors to be easily adapted to existing installations. They are also suitable for the food industry.
BRILEX - Accessories
Efficient Vent
Explosion venting - how long can you stay cool?BRILEX- Explosion Vents ensure your safety!
10
Indoor Explosion VentingBy using BRILEX Explosion Vents in combination with a unique BRILEX Ceramic Filter, economical venting of dust explosions is possible. When the vent opens during an explosion, the ceramic filter retains the dust and cools down the hot gases.
ApplicationsDue to high investigation costs and bad efficiency, design engineers and end users tried to find alternatives. The BRILEX IndoorVent offers a combination of a fast opening BRILEX Explosion Vent with a high efficient ceramic filter. The vent area of the IndoorVent is greater than the vent areas of existing quench pipes. After an explosion the IndoorVent can be re-used. The result is a cost effective solution for plant designers and end users for all industries.
ParametersThe BRILEX IndoorVent can be used for reduced explosion pressures (P red) between 0.2 to 1.5 bar g and K st values up to 250 bar m/sec.
Delivered ProductsBRILEX delivers complete units consisting of the IndoorVent and a pre-installed BRILEX explosion vent including integrated flange gaskets and monitoring sensor. A spare parts kit for immediate use after an explosion consisting of explosion vent and filter cartridges.
After an ExplosionTimes have changed since explosion quenching systems had to be thrown into the waste bin after single use. The BRILEX IndoorVent can be re-used after changing the filter cartridges and the explosion vent. Maintenance time of approximately 30 minutes is only needed before it can be used again. BRILEX guarantees this after each dust explosion.
H
L+B
Technical datas
Type IV 240 IV 600 IV 1000 IV 1600 IV 2200 IV 3200 IV 4200
Flange DN 200 DN 300 DN 400 DN 500 DN 600 DN 700 DN 800
Vent Area (cm²) 240 600 1000 1600 2200 3200 4200
Height (mm) 535 609 748 1035 1257 1750 1850
L /B Lenght 7 width (mm) 359 410 558 666 785 983 1096
Weight (kg) 38 56 75 119 171 238 312
Max. raw gas volume (m³)pro IV 1 4,4 4,4 9,7 9,7 25 25
Max. P red (bar) 1,5 1,5 1,5 1,5 1,5 0,6 0,6
BRILEX - IndoorVent
Explosion venting in the production building -stay cool - simply flameless!
Efficient Vent
11
BRILEX-IndoorVentEXL for venting of dust explosion in production buildings.- Cost reduction due to optimised manufacturing- Higher Certified Effective vent areas due to extendable modules- Extendable from 1900 cm2 to 3100 cm2- Integrated explosion vent and sensor- Tested up to P red max 0,9 bar- Certified for dusts up to KST 200 bar.m/sec- Guaranteed re-usability after an explosion
Approvals
BRILEX - IndoorVent EXL
The BRILEX IndoorVent has been tested by well-known institutions and is certified according to the 94/9/EC standard. BRILEX is certified to DIN EN ISO 9001:2008 Approvements and Certificates.
Technical datas
Type IV EXL 457 x 890 SB IV EXL 457 x 890 DB IV EXL 457 x 890 DB
Flange 457 x 890 457 x 890 457 x 890
Vent Area (cm²) 1900 3100 2100
Lenght/ width/ height (mm) 970/540/875 970/540/1635 970/540/1635
Weight (kg) 90 163 163
Max. raw gas volume (m³) pro IV <=4,4 <=4,4 >4,4 -<=9,6
Max. P red (bar) 0,9 0,9 0,9
Max. Kst - Value (bar m/s) 200 200 200
Efficient Vent
Explosion venting in the production building -stay cool - simply flameless!
12
Explosion Isolation Valves BPF-M and RSK In event of a dust explosion in a filter/dust collector, the explosion can travel back via the inlet ductwork to connected machinery or other plant equipment. Should an explosion be allowed to travel back to the plant, the explosion will gain significan speed and will cause catastrophic damage and can be life threatening to personal in the plant.Ignition sources such as ember or sparks can be produced by process machinery and then be transported to filters. Filters canproduce optimum conditions for dust explosions. The likelihood of an ignition source together with an optimum airborne dustconcentration characterises filters / dust collectors as high-risk zones for dust explosions to occur.
Correctly designed and certified Explosion Vents in filters will protect their integrity, however an un-isolated filter inlet duct will allow a high-risk hazard to propagate back to the rest of the plant. Plant managers concerned about occupational Health and Safety as well as plant protection now have a cost effective opportunity for explosion isolation of filters compared to other products such as chemical suppression barriers, diverters and knife gate valves. With certified BRILEX Isolation Valves it is now possible to isolate filters and run the plant economically. Available sizes: DN 160 - DN 1000.
Explosion Isolation Valve BPF-M
Explosion Isolation Valve RSK
Decoupling of filtersystems - no problem - BRILEX Explosion Isolation Valves
Efficient Safety
RSK:- Approved Safety Device - Suitable for organic dusts - up to KST 300 bar m/s- Pred max up 2,2 bar
BPF-M:- Approved Safety Device - Suitable for organic and non organic dusts- up to KST 200 bar m/s- Suitable for high dust load - Inspection integrated door
13
Decoupling of filtersystems - no problem - BRILEX Explosion Isolation Valves
Efficient Safety
RSK 160 160 2,2 bar g 300 200
RSK 200 200 2,2 bar g 300 200
RSK 250 250 2,2 bar g 300 200
RSK 280 280 2,2 bar g 300 210
RSK 315 315 2,2 bar g 300 260
RSK 355 355 2,2 bar g 300 310
RSK 400 400 2,2 bar g 300 360
RSK 450 450 1,4 bar g 300 410
RSK 500 500 1,4 bar g 300 460
RSK 560 560 1,4 bar g 300 490
RSK 600 600 1,4 bar g 300 500
RSK 630 630 1,4 bar g 300 520
RSK 710 710 1,4 bar g 300 555
RSK 800 800 1,4 bar g 300 575
RSK 900 900 1,4 bar g 300 585
RSK 1000 1000 1,4 bar g 300 600
Type DN Max Pred
max. KST-Value
Pressure-Drop PA*
*flow speed 10 - 30 m/s
Max Pred
max. KST-Value
BPF-M 160 160 0,5 bar 200 130
BPF-M 200 200 0,5 bar 200 150
BPF-M 250 250 0,5 bar 200 180
BPF-M 280 280 0,5 bar 200 210
BPF-M 315 315 0,5 bar 200 260
BPF-M 355 355 0,5 bar 200 310
BPF-M 400 400 0,5 bar 200 360
BPF-M 450 450 0,5 bar 200 410
BPF-M 500 500 0,25 bar 200 460
BPF-M 560 560 0,25 bar 200 490
BPF-M 600 600 0,25 bar 200 500
BPF-M 630 630 0,25 bar 200 520
BPF-M 710 710 0,25 bar 200 555
BPF-M 800 800 0,25 bar 200 575
BPF-M 900 900 0,25 bar 200 585
BPF-M 1000 1000 0,25 bar 200 600
Type DN Pressure-Drop PA*
*flow speed 10 - 30 m/s
Dimensions RSK Dimensions Bpf-M
14
Foreign Agencies
When the explosion can come from the sides - bidirectional Decoupling -
Safety and efficiency can be combined!Efficient S
afety
BRILEX - Explosion Diverter REXSExplosion diverters were probably the first method employed to decouple dust explosions. The advantage of this method was always that it provided protection in both directions as it allowed pressure to be reliably decoupled at the explosion diverter,irrespective of whether the explosions came from the extractor or filter sides.
But the method wasn't very effective when it came to the suppression of flames, and spreading flames facilitate the propagation of explosions and often cause serious damage. The method also produces massive pressure losses in the affected systems, which also severely restricts the widespread use of such diverters.
But DIN EN 16020:2011 has now created a way of using explosion diverters safely. The testing procedures that it specifies with the design regulations and the detailed catalogue of requirements that it contains clearly set out the demands that such diverters must satisfy, if they are to be used in protective systems.
But what can the standard deliver when massive losses of pressure in this "pipe in pipe" system put the cost-effectiveness of such diverters into question? Classical geometries defined in the standard produce pressure losses of up to 1500 PA, which would require huge additional fan performance to compensate.
However, new flow-simulation programs now make it possible to reduce pressure losses with standard-compliant designs by over 60% to 550 Pa.
This means that, technically, the loss of pressure has been reduced to the levels that can be achieved with non-return valves – which for many years have been broadly accepted as cost-effective decoupling systems.
Explosion diverters may also be employed to provide cost-effective bidirectional safety and protection.
Dimensions Explosion Diverter
140 309/309 222 67 390
180 500/300 272 85 470
224 537/385 315 96 552
250 490/490 354 101 615
300 570/570 417 136 720
315 690/550 432 134 747,5
355 788/645 476 146 817,5
400 735/735 552 152 948
450 1000/666 610 181 1045
500 1198/690 693 215 1190
560 1000/1000 774 260 1330
630 1100/1100 869 254 1495
DN A/B (mm) C (mm) D (mm) H (mm)
15
When the explosion can come from the sides - bidirectional Decoupling -
Safety and efficiency can be combined!Efficient S
afety
140 309/309 229 x 229 GE / DIV
180 500/300 220 x 420 GE / DIV
224 537/385 305 x 457 GE / DIV
250 490/490 410 x 410 GE / DIV
300 570/570 490 x 490 GE / DIV
315 690/550 470 x 610 GE / DIV
355 788/645 525 x 668 GE / DIV
400 735/735 645 x 645 GE / DIV
450 1000/666 586 x 920 GE / DIV
500 1198/690 610 x 1118 GE / DIV
560 1000/1000 920 x 920 GE / DIV
630 1100/1100 1020 x 1020 GE / DIV
DN Diverter A/B (mm) Vent Size ID Type Vent
Dimensions Explosion Vent
BRILEX - REXS and GE-DIV
BRILEX-GE / DIV
It's important for explosion diverters that the mechanical integrity of the fitted explosion vent has been certified accordingly. The explosion vent must be able to withstand the extreme conditions caused by the progress of the explosion in the explosion diverter. BRILEX - GE, a rectangular explosion vent with specially shaped curvature that is resistant to vacuums and therefore delivers sufficient stability, is suitable for such applications. The explosion vent withstands severe pressure cycles without limit while providing reliable protection.
16
BRILEX GmbH, 06/2014
BRILEXExplosion Protection
Our aim is your safety. Over two decades in the field of providing protection against dust explosions and the
quality of our protective systems make us your innovative and competent partner to help you
prevent and protect against explosions.