BRAVIDA BCR-P MINI CARD READER - Panasonic · 2014. 7. 25. · 44380050 BCR-P Mini Card Reader...

2
BRAVIDA BCR-P MINI CARD READER INTEGRATED BY PANASONIC Miniature contactless card reader Elegant and slim design in sturdy construction Cost-efficient solution directly connected to the S-Node or C-Node without the need for expensive adapters LEDs and internal buzzer for status indication Part assembly and sabotage protection for high security

Transcript of BRAVIDA BCR-P MINI CARD READER - Panasonic · 2014. 7. 25. · 44380050 BCR-P Mini Card Reader...

  • BRAVIDA BCR-P MINI CARD READER INTEGRATED BY PANASONIC

    Miniature contactless card readerElegant and slim design in sturdy constructionCost-efficient solution directly connected to the S-Node or C-Node without the need for expensive adaptersLEDs and internal buzzer for status indicationPart assembly and sabotage protection for high security

  • BRAVIDA BCR-P MINI CARD READER INTEGRATED BY PANASONIC

    SPECIFICATIONSGENERAL A BCR-P Mini Card Reader is included in the Bravida (Integrated by

    Panasonic) access system for contactless card reading. This card reader has a sturdy design. The card reader is generally mounted in a door environment with the door control unit S-Node in a part assembly. The lightweight format is easy to place for ultimate user convenience.

    PERFORMANCE The card reader is complete with a built-in antenna for card reading, LED indications, internal buzzer, EIA485 interface with moulded plastic encapsulation. The contactless card readers are customised for readings of Bravida (Integrated by Panasonic) contactless standard cards.

    FUNCTION The card reader is used for contactless card reading in a 75 mm range, and status indications of the door environment and access requests. LED indications and an internal buzzer alert all accesses and warnings.

    TECHNOLOGY The contactless reader uses well-tested RFID technology in the 125 kHz frequency range. The BCR-P Mini Card Reader is customised for EM Marin RFID transponder readings. In assemblies with in and out readers these are set as master and slave to avoid interference between the units. The transponder is a unique code bearer in the access system and can be ordered in different models, such as ISO chip card (CR80 with or without magnetic tape), key ring plate, bracelet plate etc.

    TECHNICAL DATASUPPLY VOLTAGE 24V DCPOWER CONSUMPTION 70 mACAPSULE CLASS IP 65OPERATING TEMPERATURE RANGE -25°C to 70°CDIMENSIONS (W X H X D) 46 x 65 x 16 mmWEIGHT appr. 50 gramCOLOUR NCS 59000N (Black)COMMUNICATION EIA485READING DISTANCE appr. 75 mmACTIVE FREQUENCY RANGE 125 kHz (+/- 10 Hz)

    PART NUMBER44380050 BCR-P Mini Card Reader

    Panasonic System Communications Company Europe, a Division of Panasonic Marketing Europe GmbH, Hagenauer Straße 43, 65203 Wiesbaden, Germany.