7/31/2019 Branch Manager Setup

1/4

Branch Manager Installation

Basic Machine Requirements:

OS: Windows XPRAM: 1 GBPartition: Create a Logical partition with D: drive

2 NIC Cards:

Eth0 should have the Local IP. (Default gateway & DNS server Value should be Blank) Eth1 should have the WAN IP. (I.e.10 series IP & DNS server Value should be Blank)

1) This is the Multicast Group to be enabled on your Router: - 239.110.110.21(IP) 20100(PORT)

2) Enable this Ips and Port also in your Router.

172.22.254.22 - 65000,35000,35001,35002172.22.254.21 - 35000, 35001, 35002, 35005

3) Please telnet and check this port and IP from the BM machine. If Telnet is working, pleasego forward with the remaining configurations.

4) Install NOW Setup.exe in that PC before proceeding with the below steps. NOW Setup.zipwhich will be available on NSE FTP in /COMMON/NOW folder.

5) Copy the VSAT-LL Windows Branch Manager Setup_v3.zip file to D Drive and unzip it.It will contain:

NOW_BM_v3.zipBranch Manager Setup.pdfProcess flow NOW on VSAT - LL ver 1.3

Unzip the NOW_BM_v3.zip file to D Drive.

6) Double Click the DLL_SETUP.exe present in D:\NOW folder.

This will automatically copy the dlls required to start the Branch Manager inC:\windows\system32 folder.When the above action is completed you will see the below screen. Click Finish.

7/31/2019 Branch Manager Setup

2/4

7/31/2019 Branch Manager Setup

3/4

7/31/2019 Branch Manager Setup

4/4

13) Start Now_BM_v3.exe in D:\Now folder:

A command prompt will appear. Please do not close this window. Please wait patiently for the processes to start and

the exe to come up.

14) Check the following processes in Task Manager. (Total 6 processes will start)

OMNELicenserver.exe OMNEUDPGateway.exe OMNELocationBroker.exe OMNECBR.exe OMNECBR.exe OMNECBR.exe

NOTE: Once all the 6 processes are started you will get the Launch Now.exe LoginScreen. Enter your LoginID & Password

15) Minimize the command prompt.NOTE: Never Close that Command Prompt.

You have successfully installed BM. Provide the nestclient.inifile from D:\Nowfolder to thedealer terminals [C:\Program Files\NOW] that will be connecting to your BM.