8/12/2019 Boysen Products

http://slidepdf.com/reader/full/boysen-products 1/2

bricks plaster, hollow blocks, drywall surfaces, and properly primed wood.

PRACTICAL COVERAGE: 25-30 square meter / 4 liters / coat

SURFACE DRY: Thirty (30) minutes

DRY THROUGH: Two (2) hours

DRY FILM THICKNESS: 1-1.5 mils/coat

OVERCOATING INTERVAL: Allow one hour before recoating.

THINNING: Use as supplied. If necessary, thin with not more than ½ liter of water per 4-liter can

APPLICATION: paint brush, roller or airless spray.

PACKAGING: 16-liter; 4-liter and 1-liter cans (white only)

AVAILABLE COLORS:

B701 WhiteB702 Off WhiteB721 CreamB723 MoonlightB725 Bone IvoryB771 Tile RedB780 Chocolate Brown

COLORANTS: Use only BOYSEN ® Latex Colors for tinting to achieve pastel shades. To producedark shades, use factory or Mix and Match™ pre -mixed colors. Do not use Hansa Yellow B-1466

and Toluidine Red B1407 for exterior applications.

DESCRIPTION: BOYSEN ® Permatex™ #3101 is a water -based, full-bodied paint that dries to a finerubbery coating, creating a beautiful textured finish on interior walls and ceilings bringing elegance toyour home interior. It adheres easily on wood, masonry, and drywall surfaces. Conceals hairline

cracks and minor surface imperfections, and dries to a fine rubbery coating that does not becomebrittle, leaving virtually no room for cracking, chipping, or peeling off.

PRINCIPAL USES: For interior wood, drywall, and masonry surfaces.

PRACTICAL COVERAGE: 5 - 6 square meter / 4 liters

SURFACE DRY: Two (2) hours

8/12/2019 Boysen Products

http://slidepdf.com/reader/full/boysen-products 2/2

DRY THROUGH: Overnight

OVERCOATING INTERVAL: Two (2) hours

THINNING: Use as supplied. If necessary, thin with not more than 1/2 liter of water per 4 liter can

PACKAGING: 4-liter cans

APPLICATION: For a regular texture pattern, apply BOYSEN ®Permatex™ #3101 straight from the can using aregular textured roller. If a different design is desired, first apply BOYSEN ® Permatex™ #3101 with aregular textured roller immediately followed by the desired pattern roller while the paint is still wetand workable. Roll in one uniform direction to impress the design onto the surface.

BOYSEN ® Skimcoat™

DESCRIPTION: BOYSEN ® Skimcoat ™ #7750 is a special bonding paste that is mixed with cementand applied on concrete to correct surface imperfections prior to painting. It repairs bubbles,honeycomb and concrete defects on waviness and plumbness up to 4 mm thick.

PRINCIPAL USES: For both interior and exterior plastered concrete, concrete slabs, acotech walls,reinforced concrete walls, and pre-cast concrete surfaces in lieu of cement plaster to eliminate

surface defects and make the surface smooth and ready for painting.

PRACTICAL COVERAGE: 0.4 kg /sq. m. / mm, recommended total thickness is from 0.3 - 4 mm.

SURFACE DRY: 30 min.; allow 14 days before painting

APPLICATION: Apply with trowel or putty knife.

PACKAGING: 25 kg per pail

POTLIFE: Thirty (30) minutes