bon appet

BON

APPEETIT

Basmati(HMC 105)

Prarie Field(HMC 190)

Antarctica(HSB 021)

Amazon(HMC 103)

Masala(HMC 168)

Pacifico(HMC 187)

Funghi(HMC 200)

Antique Brass(HSE 002)

Souk(HMC 169)

After Dark(HMC 177)

Turquoise Splash(A01 A04 GA62)

Savanna(HMC 173)

Savanna (HMC 173)

3/4” x 3/4” Glitter Glass Mosaic

BON

APPEETIT

Wild Wheat(HSE 30)

Dunes(HVS 312)

Baladi(VS230 VS205 VS237 E05)

Blizzard(HCA 18)

Fleur de Sel(HGA 21)

Nube(HGA 66)

Cinnamon(HGA 76)

Prarie Field(HMC 190)

330X330X3(13x13x1/8)

10 11.651 1519X19(3/4x3/4)

Phone: 1.888.862.8397 Fax: 1.888.868.9887

3. Apply set- ting material using the notched side of a 1/4”x1/4” squar- squar- -notched trowel.

4. Smoothen out the setting material using the flat side of the flat side of the trowel; create an even bedding approximately 3/16” thick.

7. Apply the tile sheets onto the setting material. Align the tile sheets carefully, carefully, making sure that the grout lines are parallel with one another.

1. Clean surface of application. Surface should be free of dirt, paint, oils, curing compounds etc.

2. Make sure the back of the tile (and sub-strate) is clean. Wipe with a clean damp sponge.

8. Use a rubber grouting float to apply firm pres-sure onto the tile sheets, cre-ating a level surface.

9. Using a clean damp sponge or cloth, clean any excess set-ting material that may have “oozed” over the tile surface. the tile surface.

11. Apply grout into grout joints using a rubber grouting float. Completely fill the grout joints, be sure that there are that there are

13. When grout has set (or when haze begins to form on the tile surface) clean the tile with a the tile with a clean,damp sponge.

14. For final polishing, use a dry cheese- cloth to polish the tile, within the tile, within 24 hours of grouting. 10. Allow 24-36

hours, after installation, for tile to set before continuing.

no holes while applying grout.

12. Clean any excess grout with a damp sponge or cloth, before grout hardens.