BiTT JLN Labs_Report Independent Third Party Test FRANCE

[email protected] www.jlnlab.com

The Bi-Toroid Transformer (BiTT)The Bi-Toroid Transformer (BiTT) A Thane C. Heins' invention from Potential Difference Inc. CanadaA Thane C. Heins' invention from Potential Difference Inc. Canada

FULL REPLICATIONSDATAS MEASUREMENTS

AND TESTS RESULTSby Jean-Louis Naudin

Jean-Louis Naudin – BiTT replication TESTS REPORT MARCH 2013 - www.jlnlab.com

● Build a replication of the Bi-Toroid Transformer (BiTT) based on the documents published on the Internet by Thane C. Heins (PDI).

● Check that two loads connected on BiTT secundaries ouputs use only reactive power (Power Factor close to 0) instead of active power (Power Factor = 1 in conventional transformer).

● Check that this effect also works with a BiTT driven by an Amplifier powered in DC.

BiTT REPORT on a full replication by Jean-Louis NaudinBiTT REPORT on a full replication by Jean-Louis Naudin

Main purposes of my BiTT replication February - March 2013

I am very gratefull to Thane C. Heins for his encouragements and his very helpfull technical support

● 2013-02-16 : TEST03, First BiTT v1.0 replication loaded with 2 x 1 W Leds

● 2013-02-22 : TEST05, Hein's Effect fully confirmed in the BiTT v1.5

● 2013-03-04 : TEST10, Test of an experimental version of the BiTT v2.0

● 2013-03-06 : TEST11, Measurement of the DC Input current of the BiTT v2.1

● 2013-03-19 : TEST17 : FULL MEASUREMENTS on the BiTT v1.5

Replication TESTS LogBook

BiTT working principle

BiTT simulation (FEMM 4.2)

2013-02-16 : TEST03, First BiTT v1.0 replication loaded with 2 x 1 W Leds

2013-02-22 : TEST05, Hein's Effect fully confirmed in the BiTT v1.5

2013-03-04 : TEST10, Test of an experimental version of the BiTT v2.0

2013-03-06 : TEST11, Measurement of the DC Input current of the BiTT v2.1

2013-03-19 : TEST17 : FULL MEASUREMENTS on the BiTT v1.5

● The Thane C. Heins' Bi-Toroid Transformer (BiTT) from PDI has been successfully replicated and the main effect has now been confirmed : in the tested BiTT versions powered with sinewave, the Power Factor doesn't change significantly when the OUTPUTS are FULLY LOADED.

● The measurements done on BiTT have confirmed that :

● In spite of the electrical efficiency < 100% measured in my BiTT replication, the ElectroMagnetic efficiency can be higher due to the weak EM coupling between the primary and the secundary of the BiTT. This is the result of use of the special core setup used in the Thane C. Heins' Bi-Toroid Transformer.

● The main target is now to reduce drastically the major losses by hysteresis and eddy current losses in the ferromagnetic core of the BiTT by choosing the suitable material...

Conclusions of the BiTT replications (feb-march 2013)

More datas results and videos of the experiments at : http://jnaudin.free.fr/dlenz/indexen.htm

BiTT JLN Labs_Report Independent Third Party Test FRANCE

Technology

Transcript of BiTT JLN Labs_Report Independent Third Party Test FRANCE