BIM Industry Collaboration · 5. BIM-MEP AUS Forum • Mr James Barrett Director, Integrated...
Transcript of BIM Industry Collaboration · 5. BIM-MEP AUS Forum • Mr James Barrett Director, Integrated...
BIM Industry Collaboration
v1.0
1. What is BIM-MEPAUS
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
1. What is BIM-MEPAUS ?
Some current issues delivering BIM:
• Perceived to be too complex and too difficult to adopt
• Lack of standardization
• Data lost in translation between software programs
• Time taken to build 3D content
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
Project Board;
1. What is BIM-MEPAUS ?
Mr Sumit Oberoi
Executive Director
AMCA
Mr Christopher Rankin
Executive Director
AMCA (SA)
Mr Warwick Stannus
Engineering Manager
AG Coombs
Mr Daniel Sullivan
Technical Services Manager
D&E Air Conditioning
Mr Russell Telford
Managing Director
AG Coombs
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
1. What is BIM-MEPAUS ?
Established Workflows:
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
1. What is BIM-MEPAUS ?
Standards:
• Naming Conventions and Units of Measure
• Scheduling Guidelines
• Air side Ducting and Insulation Modelling specification
• Water side and piping naming schedule
• Pump Modelling specification
• Water Cooled Electric Chiller specification
• Adjustable Pitch Axial Fan specification
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
1. What is BIM-MEPAUS ?
2. BIM-MEPAUS Template
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
2. BIM-MEPAUS Revit MEP Template
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
2. BIM-MEPAUS Revit MEP Template
3. Manufacturers Content
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
3. Manufacturers Content
CONDENSING GAS HEATING BOILERS
PUMPS
KOOLDUCT DUCT & DUCT FITTINGS
PIPE FITTINGS - VALVES
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
3. Manufacturers Content
FIRE DAMPERS, VOLUME DAMPERS,
VAV TERMINAL UNITS PIPE FITTINGS - VALVES
PLENUMS, LOUVRES, VAV CHILLED BEAMS, INFFUSERS
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
3. Manufacturers Content
DIFFUSERS, REGISTERS, DAMPERS, GRILLES
AIR & WATER COOLED CHILLERS FIRE, VOLUME & NON RETURN DAMPERS
FANS
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
3. Manufacturers Content
PRESS FIT PIPE FITTINGS
COPPER PIPE FLANGES
PIPE VALVES & STRAINERS
Pumps
Jetfans
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
IN DEVELOPMENT…IN DEVELOPMENT…IN DEVELOPMENT…IN DEVELOPMENT…
3. Manufacturers Content
4. Future Development
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
4. Future Development
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
4. Future Development
5. BIM-MEPAUS Forum
www.a2ktechnologies.com.au / [email protected] / 1800 223 562
5. BIM-MEPAUS Forum
• Mr James Barrett Director, Integrated Building Solutions, Turner Construction
• Mr Andy Sneyd Head of Design, Crown House Technologies
• Mr Steve Butler Revit MEP Product Manager, Autodesk
• Mr Andy Robins Fabrication Product Manager, Autodesk
• Mr Josh Getz Corporate BIM Manager, Southland Industries
7777thththth & 8& 8& 8& 8thththth AugustAugustAugustAugust Melbourne Convention & Exhibition CentreMelbourne Convention & Exhibition CentreMelbourne Convention & Exhibition CentreMelbourne Convention & Exhibition Centre
How do I get access to all the BIMHow do I get access to all the BIMHow do I get access to all the BIMHow do I get access to all the BIM----MEPMEPMEPMEPAUSAUSAUSAUS materials?materials?materials?materials?
• Revit MEP Template
• Content Libraries
• All updates and new content
• Participate in development and future direction
www.thinkbimmepaus.com.auwww.thinkbimmepaus.com.auwww.thinkbimmepaus.com.auwww.thinkbimmepaus.com.au
AMCA Members Non-AMCA Members
Single Access $875.00 + GST $1,295.00 + GST
5+ Access $3,250.00 + GST $4,875.00 + GST
TEL: 1800 223 562
FAX: 1800 034 444
EMAIL: [email protected]
WEB: www.a2ktechnologies.com.au
Thank you
Contact A2K Technologies