Bim for construction safety design
-
Upload
stephen-au -
Category
Technology
-
view
26 -
download
3
Transcript of Bim for construction safety design
Design of Working Platform
BIM for Construction Safety Case Study
Traditional Way vs. Virtual Way
www.mtech.com.hk 2BIM Consultant
BEFORE• 2D drawing, text, photo and video• Only Safety Manager has OSH knowledge• OSH are difficult to be predicted into
design and operation• OSH data & engineering data are
segmented• Push based training
Virtual• 3D intelligent model• 3D Model maintained “ Life-Like
experience”• Collaboration is active during design &
construction• Validate OSH procedure virtually and
interactively• Interactive training and learning• 3D intelligent model captures operation
performance data
INTELLECTUAL PROPTERTYINTELLECTUAL PROPTERTY
VIRTUALTangible Assets
REAL OPERATIONSREAL OPERATIONS
Non tangible Assets
PHYSICAL
Process and product knowledge
Construction
“Define, Plan, Validate, Monitor & Control the Physical world in a Virtual Digital
Environment”
www.mtech.com.hk 3BIM Consultant
Working Environment Investigation
4BIM Consultant
The surroundings that are being travelled or worked in
Surroundings of a particularly dangerous nature
The surface that is being travelled on or being worked on
What is being worked on or with
Working Platform
BIM Consultantwww.mtech.com.hk 5
Design of Supporting Bracket in 2D Plan
BIM Consultantwww.mtech.com.hk 6
The horizontal spacing between the steel brackets should not be larger than 1.3 m
IS THE SUPPORTING BRACKET IN THE RIGHT POSITION?
Is it fulfilled the safety requirement?Can it be installed?Will it obstruct the other works such as installation of fascade, windows, drainage pipes etc.
BIM Consultantwww.mtech.com.hk 7
BIM for Safety
BIM Consultantwww.mtech.com.hk 8
3D Views
BIM Consultantwww.mtech.com.hk 9
Issues Finding (1)
Clash with Air Conditioner Platform
Clash with Windows Frame
BIM Consultantwww.mtech.com.hk 10
Issues Finding (2)
Clash with Air Conditioner
Clash with Drainage Pipes
BIM Consultantwww.mtech.com.hk 11
Potential Safety Risks
• The bracket is not installed in that specified position
• The bracket may be taken off by other trades when they do their works
• Even the bracket may be re-installed back after the works, but it may not according to the safety requirement.
BIM Consultantwww.mtech.com.hk 12
BIM - Construction Safety Design
BIM Consultantwww.mtech.com.hk 13
4D BIM Simulation For Safety Validation4D BIM Simulation For Safety Validation