BIDITUP AUCTIONS & APPRAISALS Page 1 11426 … · 11426 ventura blvd., second floor studio city,ca...

Printed:03/16/2014 13:38

BIDITUP AUCTIONS & APPRAISALS11426 VENTURA BLVD., SECOND FLOOR

STUDIO CITY,CA 91604(818) 508-7034 FAX (818) 508-3025

www.biditup.com

Catalog for Auction:AP EXHAUST- LOUDON, TNThis catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy,

genuineness, authenticity, description, weight, count or measure of any of the lots specifiedherein.

Thank you for attending another BIDITUP auction -biditup.com

Lot Num Qty. Description Lot Num Qty. Description

DAY 2 2000A 1 TWO WHEEL BANDING CART,

WITH TOOLS 2001 1 TWO WHEEL BANDING CART,











WITH TOOLS 2012 1 TWO WHEEL BANDING CART 2013 1 BANDING STAND WITH TOOLS 2014 1 BANDING STAND WITH TOOLS 2015 1 BANDING STAND WITH TOOLS 2016 1 BANDING STAND 2017 1 BANDING STAND 2018 1 BANDING STAND 2019 1 BANDING STAND 2020 1 BANDING STAND 2021 1 FROMM Mdl: A483 PNEUMATIC

STRAPING TOOL S/N 0102219 2021A 1 FROMM Mdl: A483 PNEUMATIC

STRAPING TOOL S/N 0104787 2022 1 SIGNODE Mdl: 1751 PNEUMATIC

STRAPING TOOL 2023 1 FROMM PNEUMATIC STRAPING

TOOL 2024 1 ORGAPAK PNEUMATIC STRAPING

TOOL 2025 1 PNEUMATIC STRAPING TOOL 2026 1 SIGNODE PNEUMATIC STRAPING

TOOL

2027 1 SIGNODE Mdl: AEC ELECTRIC STRAPING TOOL

2028 1 PNEUMATIC CRIMPING TOOL 2029 1 PNEUMATIC CRIMPING TOOL 2030 1 METAL STRAPING MATERIAL - (1)

PALLET, 3/4''X .023'' 2031 1 METAL STRAPING MATERIAL - (1)

PALLET ASSORTED STRAPPING MATERIAL WITH (7) BOXES CRIMPS

2032 1 (7) BAND CUTTING TOOLS 2033 1 (7) BAND CUTTING TOOLS 2034 1 PRO LIFT Mdl: T63002 3 TON

FLOOR JACK 2035 1 PRO LIFT 2.5 TON FLOOR JACK 2036 1 FLOOR JACK 2037 1 CHICAGO Mdl: 44006 ELECTRIC

HOIST - 440 LB. MAX LIFT, 110 VAC, SINGLE PHASE, PUSH BUTTON PENDENT CONTROL

2038 1 CHICAGO Mdl: 44006 (2) ELECTRIC HOIST - 440 LB. MAX LIFT, 110 VAC, SINGLE PHASE, (NEED REPAIR)

2039 1 JET Mdl: L90 1 TON CHAIN HOIST 2040 1 JET Mdl: L90 1 TON CHAIN HOIST 2041 1 MERRILL BROTHERS Mdl: 21N

PLATE LIFT 2042 1 (12) GREASE GUNS 2043 1 (5) DRAWER TOOL CHEST WITH

CONTENT OF MISC. HAND TOOLS 2044 1 (7) DRAWER TOOL CHEST WITH

CONTENT OF MISC. HAND TOOLS 2045 1 (8) DRAWER TOOL CHEST WITH

CONTENT OF MISC. HAND TOOLS 2046 1 (15) DRAWER TOOL CHEST,

EMPTY 2047 1 (8) DRAWER TOOL CHEST WITH

CONTENT OF MISC. HAND TOOLS 2048 1 (20) ASSORTED TOOL BOXES

WITH CONTENT OF ASSORTED HAND TOOLS

2049 1 CAMPBELL HAUSFELD Mdl: BT629102AJ ELECTRIC AIR COMPRESSOR - 5 HP., 26 GALLON TANK, 125 MAX. PSI, 120 VAC, (LOC, GLA)

Printed:03/16/2014 13:38



www.biditup.com

Catalog for Auction:AP EXHAUST- LOUDON, TN



2050 1 CAMPBELL HAUSFELD Mdl: MT500106AJ ELECTRIC AIR COMPRESSOR - 3/4 HP., 120 V. 7.5 GALLON TANK, 125 MAX. PSI, (LOC, GLA)

2051 1 MID WEST PRODUCTS PORTABLE AIR TANK - 125 MAX. PSI, (LOC, GLA)

2052 1 RETRACTA RETRACTABLE HOSE REAL

2053 1 SPRINGOMATIC RETRACTABLE HOSE REAL

2054 1 TROY-BUILT Mdl: 20241 PORTABLE PRESSURE WASHER - 2600 PSI, 2.5 GALLONS PER MIN., GAS POWERED HONDA ENGINE, 5 HP., (LOC, GLA)

2055 1 PALLET OF LARGE CASTERS AND PARTS, (LOC, GLA)

2056 1 PALLET OF LARGE CASTERS AND PARTS, (LOC, GLA)

2057 1 PALLET OF FIXTURE CLAMPS, NEW AND USED, (LOC, GLA)

2058 1 NEW SNAP TOGETHER FLOOR TILES - (500) PIECES, 12'X 12'', RED AND BLACK, (LOC, GLA)

2059 1 (5) SAFETY HARNESSES, (LOC, GLA)

2060 1 (5) SAFETY HARNESSES, (LOC, GLA)

2061 1 (4 ) SAFETY HARNESSES, (LOC, GLA)

2062 1 ENERPAC Mdl: P-392 HYDRAULIC HAND PUMP - WITH (2) RAMS, (LOC, GLA)

2063 1 HUTH Mdl: MIGHTY MATE 2 PNUMATIC EXPANDING TOOL, 120V, (LOC, GLA)

2064 1 PNUMATIC EXPANDING TOOL, (LOC, GLA)

2065 1 (3) ASSORTED GEAR PULLERS, (LOC, GLA)

2066 1 HUTH Mdl: BEND-0-GRAPH BEND INDICATOR, (LOC, GLA) -

2067 1 (3) ASSORTED PIPE WRENCHES - (1) 36'', (2) 16'' PIPE WRENCH, (LOC, GLA)

2068 1 RIDGID Mdl: 2C PIPE VISE, (LOC, GLA)

2069 1 (2) RIDGIDDEBURING TOOLS, (LOC, GLA)

2070 1 (10) RIDGID THREADING DIES WITH HANDEL, (LOC, GLA)

2071 1 (13) RIDGID THREADING DIES, (LOC, GLA)

2072 1 (4) WEATHERHEAD ASSORTED TUBING BENDERS, (LOC, GLA)

2073 1 (6) ASSORTED MANUAL PIPE BENDERS, (LOC, GLA)



2076 1 RIDGID Mdl: 535 ELECTRIC PIPE MACHINE : TWO WHEEL, 120 V, WITH (2) DIES, S/N 350287( LOC, GLA)

2077 1 ENERPAC 25 TON H-FRAME SHOP PRESS - WITH ENERPAC MODEL, PUJ14018 POWER SOURCE, PUSH BUTTON PENDANT CONTROL, (LOC, PRESS BAY)

2078 1 GREENERD Mdl: 3E ARBOR PRESS - MOUNTED TO TABLE, (LOC, GLA)

2079 1 DAKE Mdl: 24 ARBOR PRESS - WITH CART, (LOC, GLA)

2080 1 DATON Mdl: 3 ARBOR PRESS 2081 1 DAKE Mdl: 1 ARBOR PRESS 2082 1 PHASE 2 Mdl: 260 ARBOR PRESS -

MOUNTED TO CART, (LOC, GLA) 2083 1 TRENSCELL Mdl: GRD5544 10 TON

FLOOR SCALE - 48''X 48'' PLATFORM, WITH GSE, MODEL 675 PRECISION COUNTING SCALE, (LOC, GLA)

2084 1 UNIBRIDGE - 48''X 48'' PLATFORM, WITH WEIGH-TRONIX, MODEL WI-125 DIGITAL READOUT , (LOC, GLA)

2085 1 GSE Mdl: 675 PRECISION COUNTING SCALE - 100 LB CAP., (LOC, GLA)

2086 1 AVERY Mdl: PC 905 TABLE TOP SCALE

2087 1 OHAUS Mdl: DEFENDER TABLE TOP SCALE - 3000 SERIES DIGITAL DISPLAY., (LOC, GLA)

2088 1 PELOUZE Mdl: 4010 TABLE TOP SCALE - 150 LB. CAP., (LOC, GLA)

Printed:03/16/2014 13:38



www.biditup.com




2089 1 TOLEDO Mdl: 2181 FLOOR SCALE - 800 LB. CAP., (LOC, GLA)

2090 1 ACCU-WEIGH Mdl: BD-100 BENCH TOP SCALE - 100 LB. CAP., (LOC, GLA)

2091 1 BIG JOE Mdl: 2018-RO7 ELECTRIC WALK BEHIND LIFT - 2000 LB. CAP., 12 VOLT BATTERY, BUILT-IN CHARGER, 24''X 24'' PLATFORM, (LOC. WAREHOUSE)

2092 1 BIG JOE Mdl: 2018-RO7 ELECTRIC WALK BEHIND LIFT - 2000 LB. CAP., 12 VOLT BATTERY, BUILT-IN CHARGER, 24''X 24'' PLATFORM, (LOC. WAREHOUSE)

2093 1 PRESTO Mdl: B862-2000 ELECTRIC WALK BEHIND LIFT - 2000 LB. CAP., 12 VOLT BATTERY, BUILT-IN CHARGER, 26'' FORK WIDTH CAP., (LOC. WAREHOUSE)

2094 1 PRESTO Mdl: B862-2000 ELECTRIC WALK BEHIND LIFT - 2000 LB. CAP., 12 VOLT BATTERY, BUILT-IN CHARGER, 26'' FORK WIDTH CAP., (LOC. WAREHOUSE)

2095 1 LEE Mdl: B566-1500 ELECTRIC WALK BEHIND LIFT - 1500 LB. CAP., 12 VOLT BATTERY, BUILT-IN CHARGER, 24''X 24'' PLATFORM, (LOC. WAREHOUSE)

2096 1 PRESTO Mdl: B566-1500 ELECTRIC WALK BEHIND LIFT - 1500 LB. CAP., 12 VOLT BATTERY, BUILT-IN CHARGER, 24''X 29'' PLATFORM, (LOC. WAREHOUSE)

2097 1 GENIE Mdl: GL4 MANUAL LIFT - HAND CRANK OPERATED, 500 LB. CAP., (LOC. WAREHOUSE)

2098 1 GENIE Mdl: GL4 MANUAL LIFT - HAND CRANK OPERATED, 500 LB. CAP., (LOC. WAREHOUSE)

2099 1 MITSUBISHI Mdl: GS HYDRAULIC PALLET JACK - 5000 LB. CAP., 27''X 48'' FORKS, (LOC. WAREHOUSE)

2100 1 WESCO HYDRAULIC PALLET JACK - 5000 LB. CAP., 27''X 48'' FORKS, (LOC. WAREHOUSE)



2103 1 PALLET MULE Mdl: 48-27-5000AA HYDRAULIC PALLET JACK - 5000 LB. CAP., 27''X 48'' FORKS, (LOC. WAREHOUSE)

2104 1 LIFT-RITE Mdl: L50 HYDRAULIC PALLET JACK - 5000 LB. CAP., 27''X 48'' FORKS, (LOC. WAREHOUSE)




2108 1 PALLET MULE Mdl: 48-27-5000AA HYDRAULIC PALLET JACK -


2110 1 HYDRAULIC PALLET JACK - 5000 LB. CAP., 27''X 48'' FORKS, (LOC. WAREHOUSE)


2112 1 LIFT-RITE Mdl: L50 HYDRAULIC PALLET JACK - 5000 LB. CAP., 27''X 48'' FORKS, (LOC. WAREHOUSE)

2113 1 DURA LIFT HYDRAULIC PALLET JACK - 5000 LB. CAP., 27''X 48'' FORKS, (LOC. WAREHOUSE)




Printed:03/16/2014 13:38



www.biditup.com









2122 1 CE HYDRAULIC PALLET JACK - 5500 LB. CAP., 21''X 36'' FORKS, (LOC. WAREHOUSE)

2123 1 MITSUBISHI Mdl: GS HYDRAULIC PALLET JACK - 5500 LB. CAP., 21''X 36'' FORKS, WITH CART MOUNTED TO FORKS, (LOC. WAREHOUSE)

2124 1 (3) TWO WHEEL HAND DOLLY, (LOC. WAREHOUSE)

2125 1 (2) TWO WHEEL HAND DOLLY, (LOC. WAREHOUSE)

2126 1 (3) TWO WHEEL BARREL DOLLY, (LOC. WAREHOUSE)

2127 1 (3) FOUR WHEEL BARREL STANDS, (LOC. WAREHOUSE)

2128 1 GS Mdl: BS25 HYDRAULIC DIE CART - 55O LB. CAP., 33''X 20'' PLATFORM , (LOC. DIRECT FIT CONVERTERS)

2129 1 GS HYDRAULIC DIE CART - 55O LB. CAP., 33''X 20'' PLATFORM , (LOC. DIRECT FIT CONVERTERS)

2130 1 GS HYDRAULIC DIE CART - 55O LB. CAP.,33''X 20'' PLATFORM , (LOC. DIRECT FIT CONVERTERS)

2131 1 GS HYDRAULIC DIE CART - 55O LB. CAP., 33''X 20'' PLATFORM ., (LOC. DIRECT FIT CONVERTERS)

2132 1 HYDRAULIC DIE CART - 28''X 18'' PLATFORM , (LOC. DIRECT FIT CONVERTERS)






2138 1 SOUTHWORTH HYDRAULIC DIE CART - 330 LB. CAP., 28''X 18'' PLATFORM , (LOC. DIRECT FIT CONVERTERS)


2140 1 HYDRAULIC DIE CART - 330 LB. CAP., 28''X 18'' PLATFORM , (LOC. DIRECT FIT CONVERTERS)









Printed:03/16/2014 13:38



www.biditup.com




2149 1 (5) ASSORTED HYDRAULIC LIFT CARTS , (LOC. DIRECT FIT CONVERTERS)

2150 1 (5) ASSORTED HYDRAULIC LIFT CARTS - WITH PARTS TUBE MOUNTED , (LOC. DIRECT FIT CONVERTERS)



2153 1 HYDRAULIC TUB TIPPER - 12 VOLT, WITH BUILT IN CHARGER, MATERIAL TOTE/TIPPER,( LOC. PRESS BAY)










2163 1 LINCOLN Mdl: QUARE WAVE TIG 355 TIG WELDER - ON FOUR WHEEL CART, SINGLE PHASE, AC/DC TIG & STICK ARC WELDING POWER SOURCE, WITH FOOT PEDAL AND TIGER COOLER, (LOC. MUFFLER CELL 4) S/N 0194800885

2164 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N KC128310

2165 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N KB154569

2166 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N KD544300

2167 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N KA885462



Printed:03/16/2014 13:38



www.biditup.com





2171 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N KA 352020



2174 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH MILLER S-52E WIRE FEED, (LOC. MUFFLER CELL 4) S/N KD398115


2176 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH MILLER S-52E WIRE FEED, (LOC. MUFFLER CELL 4) S/N KF759600


2178 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH MILLER S-52E WIRE FEED, (LOC. MUFFLER CELL 4) S/N KC203933



2181 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART,, WITH MILLER S-70 WIRE FEED, (LOC. MUFFLER CELL 4) S/N KB107340


2183 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - WITH MILLER S-54A WIRE FEED, (LOC. MUFFLER CELL 4) S/N KC295684

2184 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - WITH MILLER S-70 WIRE FEED, (LOC. MUFFLER CELL 4) S/N KD368354



Printed:03/16/2014 13:38



www.biditup.com




2187 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N JK604660

2187A 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - (LOC. MUFFLER CELL 4) S/N KD544298

2188 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - (LOC. MUFFLER CELL 4) S/N KC327690

2189 1 MILLER Mdl: DELTAWELD 452 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N KJ191747

2190 1 HOBART Mdl: FABSTAR 4030 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH HOBART 2410 WIRE FEED, (LOC. MUFFLER CELL 4) S/N 397PS 13906

2191 1 HOBART Mdl: FABSTAR 4030 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, WITH HOBART 2410 WIRE FEED, (LOC. MUFFLER CELL 4) S/N 196WSD3275

2192 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - IN NEED OF REPAIR, (LOC. MUFFLER CELL 4) S/N KB006160


2194 1 MILLER Mdl: DELTAWELD 451 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - IN NEED OF REPAIR, (LOC. MUFFLER CELL 4) S/N JK604667




2198 1 MILLER Mdl: MAXTRON 450 DC INVERTER ARC WELDER - ON FOUR WHEEL CART, WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N KD476588

2199 1 MILLER Mdl: MAXSTAR 350 TIG WELDER - NEW, SINGLE TO 3 PHASE, WITH COOLMATE 3.5, (LOC. MUFFLER CELL 4) S/N MAO70343L

2200 1 MILLER Mdl: MAXSTAR 350 TIG WELDER - NEW, SINGLE TO 3 PHASE, WITH COOLMATE 3.5, (LOC. MUFFLER CELL 4) S/N MAO40426L

2201 1 MILLER Mdl: CP-300 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, MILLER 24 A WIRE FEED, (LOC. MUFFLER CELL 4) S/N JJ366157

2202 1 MILLER Mdl: CP-300 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, MILLER AXCESS 40 A WIRE FEED, (LOC. MUFFLER CELL 4) S/N LG320123U

2203 1 MILLER Mdl: DELTA-FAB CONSTANT VOLTAGE DC WELDING POWER SOURCE - ON STAND, MILLER AXCESS 24 V WIRE FEED, (LOC. MUFFLER CELL 4) S/N LG020893C

2204 1 MILLER Mdl: DELTA-FAB CONSTANT VOLTAGE DC WELDING POWER SOURCE - ON STAND, MILLER AXCESS 24 V WIRE FEED, (LOC. MUFFLER CELL 4) S/N LE291793

Printed:03/16/2014 13:38



www.biditup.com




2205 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - ON FOUR WHEEL CART, WITH MILLER 24 V WIRE FEED, (LOC. MUFFLER CELL 4) S/N LA201391

2206 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - ON FOUR WHEEL CART, WITH MILLER S-52E WIRE FEED, (LOC. MUFFLER CELL 4) S/N LA292321

2207 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - ON FOUR WHEEL CART, WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N LE467220

2208 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - ON STAND, WITH MILLER S-60 WIRE FEED, (LOC. MUFFLER CELL 4) S/N LE329360

2209 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - ON STAND, WITH MILLER S-70 WIRE FEED, (LOC. MUFFLER CELL 4) S/N LG060326A

2210 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - ON STAND, WITH MILLER S-62 WIRE FEED, (LOC. MUFFLER CELL 4) S/N LF298438

2211 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - (LOC. MUFFLER CELL 4) S/N LA304442

2212 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - (LOC. MUFFLER CELL 4) S/N LF022238


2214 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - (LOC. MUFFLER CELL 4) S/N KJ038158


2216 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - (LOC. MUFFLER CELL 4) S/N KJ038156

2217 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - (LOC. MUFFLER CELL 4) S/N LB065925

2218 1 MILLER Mdl: XMT 034 CC/CV DC INVERTER ARC WELDER - (LOC. MUFFLER CELL 4) S/N KK038498

2219 1 MILLER Mdl: AXCESS 300 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - ON STAND, MILLER AXCESS 40 V WIRE FEED, (LOC. MUFFLER CELL 4) S/N LG320123U

2220 1 MILLER Mdl: SRH-444 DC ARC WELDING POWER SOURCE - ON FOUR WHEEL CART, (LOC. MUFFLER CELL 4) S/N JA372809

2221 1 250 CONSTANT VOLTAGE ARC WELDER - ON FOUR WHEEL CART, WITH SYSTEMATIC EW 101 WIRE FEED, (LOC. MUFFLER CELL 4)

2222 1 THERMAL ARC Mdl: STAR 4030 DC ARC WELDER - WITH THERMAL FORM 2410 WIRE FEED, (LOC. MUFFLER CELL 4) S/N 398TS18698

2223 1 THERMAL ARC Mdl: STAR 4030 DC ARC WELDER - WITH THERMAL FORM 2410 WIRE FEED, (LOC. MUFFLER CELL 4) S/N 398TS18698

2224 1 MILLER Mdl: THENDER BOLT CC. AC/DC WELDING POWER SOURCE - MOUNTED TO HAND DOLLY S/N KF815014

2225 1 MILLER Mdl: THENDER BOLT CC. AC/DC WELDING POWER SOURCE

2226 1 LINCOLN Mdl: 225 AC ARC WELDER - ON TWO WHEEL DOLLY, (LOC. MUFFLER CELL 4) S/N 9422-605

2227 1 LINCOLN Mdl: IDEALARC 250 AC ARC WELDER - ON FOUR WHEEL CART, (LOC. MUFFLER CELL 4)

2228 1 MILLER Mdl: CP-200 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE - S/N KC181271

2228A 1 MILLER PALLET WITH (6) ASSORTED WIRE FEEDERS, NEED REPAIR

Printed:03/16/2014 13:38



www.biditup.com




2229 1 HYPERTHERM Mdl: HD 4070 PLASMA CUTTING SYSTEM - 3 PHASE, 480 V,, (LOC. MUFFLER CELL 4) S/N 4070-000413

2230 1 HYPERTHERM Mdl: 800 PLASMA CUTTING SYSTEM - PORTABLE, (LOC. MUFFLER CELL 4) S/N 083002

2231 1 THERMAL DYNAMICS Mdl: CUTMASTER 50 PLASMA CUTTING SYSTEM - PORTABLE, (LOC. MUFFLER CELL 4)

2232 1 THERMAL DYNAMICS Mdl: PAK MASTER 50 PLASMA CUTTING SYSTEM - PORTABLE, (LOC. MUFFLER CELL 4)

2233 1 THERMAL DYNAMICS Mdl: PAK 3XR PLASMA CUTTING SYSTEM - PORTABLE TWO WHEEL, (LOC. MUFFLER CELL 4)

2234 1 SNAP-ON Mdl: YA 2230 PLASMA CUTTING SYSTEM - PORTABLE FOUR WHEEL WHEEL, (LOC. MUFFLER CELL 4)

2235 1 HYPERTHERM Mdl: POWER MAX 30 PLASMA CUTTING SYSTEM - PORTABLE, (LOC. MUFFLER CELL 4)

2236 1 TORCHMATE CNC PLASMA CUTTING SYSTEM - 5Æ X 12Æ BRIDGE, WITH WATER TABLE, TO INCLUDE CUTMASTER MODEL 101 PLASMA CUTTING SYSTEM

2237 1 DYNAMIC Mdl: DR 4000 CNC 6 AXIS ROBOTIC WELDING SYSTEM - OTC ROBOT MANIPULATOR MODEL IRB-601, OTC ROBOTIC CONTROL CABINET MODEL L4794 AND OTC TURBO PULLS 350 WELDING POWER SOURCE, TEACH PENDANT, (LOC. HIGH PERFORMANCE)

2238 1 DYNAMIC Mdl: DR 4000 CNC 6 AXIS ROBOTIC WELDING SYSTEM - OTC ROBOT MANIPULATOR MODEL IRV-601, OTC ROBOTIC CONTROL CABINET MODEL L4794 AND OTC TURBO PULLS 350 WELDING POWER SOURCE, TEACH PENDANT, (LOC. HIGH PERFORMANCE)

2239 1 ALMEGA Mdl: EX-V6 - OTC ROBOT MANIPULATOR MODEL EX-MV8, OTC ROBOTIC CONTROL CABINET MODEL EXCMN1-R000 AND OTC TURBO PULLS 500 WELDING POWER SOURCE, (LOC. HIGH PERFORMANCE)

2240 1 MILLER AUTOMATIC M MICRO PROCESOR WELD CONTROL CNC WELDING STATION - DUAL WELDING SYSTEM, (LOC, PIPE CELL 7)

2241 1 ENTRON EM4000 SEAM WELDER - FOUR POST SPOT WELD SYSTEM, (LOC, SHORT PIPE 3C)

2242 1 TECNA 4622S1 SPOT WELDER - 440 V., (LOC. UNIVERSAL CONVERTER)

2243 1 WESTERN ARCTRONICS 40 KVA SPOT WELDER - SINGLE PHASE, (LOC. MUFFLER CELL 4)





2248 1 TECNA 4622N SPOT WELDER - 440 V., (LOC. UNIVERSAL CONVERTER)

2249 1 TECNA SPOT WELDER - 440 V., (LOC. UNIVERSAL CONVERTER)

2250 1 WESTERN ARCTRONICS 40 KVA SPOT WELDER - (LOC. MUFFLER CELL 1)

Printed:03/16/2014 13:38



www.biditup.com




2251 1 WESTERN ARCTRONICS 40 KVA SPOT WELDER - 480 V., (LOC. CRANE BAY)

2252 1 WESTERN ARCTRONICS 40 KVA SPOT WELDER - 460 V. SINGLE PHASE, (LOC. CRANE BAY)

2253 1 WESTERN ARCTRONICS 40 KVA SPOT WELDER - 460 V. SINGLE PHASE, (LOC. CRANE BAY)

2254 1 WELDING WIRE - (4) PARTIAL BARRELS OF ASSORTED WELD WIRE, (LOC. HIGH PERFORMANCE)






2260 1 (6) ROUND WIRE BARREL FFED HOOD - (LOC. HIGH PERFORMANCE)





2265 1 (7) SQUARE TOP WIRE FFED HOOD - (LOC. HIGH PERFORMANCE)

2266 1 LOT OF WIRE FEED LINES - (LOC. HIGH PERFORMANCE)

2267 1 (12) ASSORTED WELD CURTAINS - (LOC. HIGH PERFORMANCE)



2270 1 (2) PALLETS OF WELD CURTAIN MATERIAL - (LOC. GLA)

2271 1 PALLET OF ASSORTED WELD WIRE AND ROD - (LOC. GLA)

2272 1 PALLET OF ASSORTED MIG WELD GUNS - (LOC. GLA)

2273 1 PALLET OF ASSORTED MIG WELD GUNS - (LOC. GLA)

2274 1 (12) ASSORTED WELD HELMETS - (LOC. GLA)

2275 1 (12) ASSORTED WELD HELMETS - (LOC. GLA)

2276 1 PALLET OF ASSORTED WELD AND TORCH EQUIPMENT - TO INCLUDE NEW TIPS, HAMMERS, CLAMPS, TONGS, ETC., (LOC. GLA)

2277 1 PALLET OF NEW FLAM RESISTANT WELD/TORCH CLOTHING - TO INCLUDE BOOT OVERS, SHIRTS, CUFFS, APRONS, (LOC. GLA)

2278 1 PALLET OF PPE - TO INCLUDE RESPIRATORS, FILTERS, HARD HATS, SPRAY SHIELDS, ETC., (LOC. GLA)

2279 1 PALLET OF ASSORTED WORK GLOVES - (LOC. GLA)

2280 1 TWO WHEEL TORCH CART - TO INCLUDE (2) REGULATORS, (2) TORCHES AND LINES, (LOC. GLA)

2281 1 TWO WHEEL TORCH CART - TO INCLUDE (1) REGULATORS, (1)) TORCHES AND LINES, (LOC. GLA)

2282 1 TWO WHEEL TORCH CART - (LOC. GLA)

2283 1 TWO WHEEL TORCH CART - (LOC. GLA)

2284 1 TWO WHEEL SINGLE TANK CART - (LOC. GLA)

2285 1 FOUR PLACE TANK STAND - (LOC. GLA)



Printed:03/16/2014 13:38



www.biditup.com




2288 1 WELDING MANIPULATOR - ELECTRIC, FOOT PEDAL OPERATED WELDING ROTATOR, (LOC. GLA)

2289 1 WELDING MANIPULATOR - ELECTRIC, FOOT PEDAL OPERATED WELDING ROTATOR, ON FOUR WHEEL STAND, (LOC. GLA)

2290 1 WELDING MANIPULATOR - ELECTRIC, FOOT PEDAL OPERATED WELDING ROTATOR, ON FOUR WHEEL STAND, (LOC. GLA)

2291 1 (4) WELDING MANIPULATORS - (4) ASSORTED WELD MANIPULATORS TO INCLUDE (1) WELD TABLE AND (2) STANDS, (LOC. GLA)

2291A 1 (2)WELDING ENCLOSURE - TO INCLUDE WELD STANDS, RACKS AND MISC, (MUFFLER WELD)

2291B 1 (3) WELDING ENCLOSURE - TO INCLUDE WELD STANDS, RACKS AND MISC, (MUFFLER WELD)

2291C 1 (4) WELDING ENCLOSURE - TO INCLUDE WELD STANDS, RACKS AND MISC, (MUFFLER WELD)

2291D 1 (3) WELDING ENCLOSURE - TO INCLUDE WELD STANDS, RACKS AND MISC, (MUFFLER WELD)

2291E 1 WELD AREA - TO INCLUDE (6) FAN HOODS, WELD FIXTURES, STANDS, CABINETS AND MISC., ( MUFFLER WELD AREA)

2292 1 CAMFIL FARR Mdl: GS-20 AIR FILTRATION SYSTEM - (OUTSIDE) S/N 778817

2293 1 CAMFIL FARR Mdl: GS-61 AIR FILTRATION SYSTEM - (OUTSIDE) S/N 651880

2294 1 PRXAIR Mdl: T3-12 DUST COLLECTOR - (6)) CATRIDGE, 5 HP., 208/460 V, 3 PHASE, (LOC. OUTSIDE) S/N IG565411-001

2295 1 PRXAIR Mdl: T3-12 DUST COLLECTOR - (6)) CATRIDGE, 5 HP., 208/460 V, 3 PHASE, (LOC. OUTSIDE) S/N IG586730001

2296 1 MICRO AIR CLEAN AIR SYSTEM - (4) CARTRIDGE DUST COLLECTOR, FLOOR MOUNT, (LOC. PRESS BAY)

2297 1 MICRO AIR Mdl: MC3000 CLEAN AIR SYSTEM - CEILING MOUNT, (LOC. UNIVERSAL CONVERTERS)









2306 1 MICRO AIR Mdl: MC3000 CLEAN AIR SYSTEM - STAND MOUNT, (LOC. PIPE BENDING)






Printed:03/16/2014 13:38



www.biditup.com







2315 1 MICRO AIR Mdl: MX3510 CLEAN AIR SYSTEM - CEILING MOUNT, (LOC. SHORT PIPE)

2316 1 LITTELL Mdl: 60-24 UNCOILER - 6000 LB. CAP., 24'' COIL WIDTH, (LOC. PERF PRESS 1) S/N 80279-72

2317 1 LITTELL Mdl: 3127PD COIL FEEDER - 12'' WIDTH CAP., VARIABLE SPEED, (LOC. PERF PRESS 1) S/N 80278

2318 1 HENNERY WRIGHT 60 TON PERF PRESS - 60 TON PRESS, 100 STROKES PER MIN, 8.5'' MAX WIDTH CAP, PERFECTO FEEDER, (PRESS REBUILD IN 2008), (LOC. PERF PRESS 1)

2319 1 LITTELL COIL FEEDER - 8.5'' MAX WIDTH CAP, (LOC. PERF PRESS 1)

2320 1 LITTELL RECOILER - 12'' MAX. CAP, (LOC. PERF PRESS 1)

2321 1 LITTELL Mdl: 40-18 UNCOILER - 4000 LB CAP., 18'' WIDTH CAP., INSIDE DIA. 16'' TO 20'', (LOC. PERF PRESS 2) S/N 69834-62

2322 1 HTC 150 TON HYDRAULIC PERF PRESS - 150 TON PRESS, STROKES PER MIN, PA INDUSTRIES FEEDER MODEL SPF-16 WITH ADVANTAGE SERVO ROLL FEED CONTROLS, (LOC. PERF PRESS 2)

2323 1 I.MA.L. RECOILER - 36'' X 20'' DIAM., (LOC. PERF PRESS 2)

2324 1 UNCOILER - 30'' MAX CAP. WIDTH, (LOC. PERF PRESS 2)

2325 1 HEIM Mdl: 9GA PERF PRESS - 90 TON CAP. 4 STROKE, 100 STROKES PER. MIN., WITH 12'' FEEDER, (LOC. PERF PRESS 2) S/N H-3471

2326 1 COE Mdl: CPR-10036 UNCOILER - 10,000 LB., 36'' COIL DEPTH, (LOC. BLANKING LINE) S/N 2450-1

2327 1 FAMCO Mdl: P-PC1036B SHEAR LINE - FEED/NOTCH/SHEAR, 10 GAGE MAX. CAP., 36'' WIDTH CAP., (LOC. BLANKING LINE) S/N S-03016519

2328 1 LITTELL UNCOILER/STRAIGHNER - 10,000 LB X 36ö LITTELL DRIVEN UNCOILER, HYD EXPANSION, AIR BRAKE, WITH 30ö X .080 LITTELL, MODEL 432-17D STRAIGHTENER, YEAR 1994, 150 FPM, S/N 91309-94, WITH COIL CAR CONVEYOR10,000 LB X 36ö LITTELL DRIVEN UNCOILER, HYD EXPANSION, AIR BRAKE, WITH 30ö X .080 LITTELL, MODEL 432-17D STRAIGHTENER, YEAR 1994, 150 FPM, S/N 91309-94, WITH COIL CAR CONVEYOR10,000 LB X 36ö LITTELL DRIVEN UNCOILER, HYD EXPANSION, AIR BRAKE, WITH 30ö X .080 LITTELL, MODEL 432-17D STRAIGHTENER, YEAR 1994, 150 FPM, S/N 91309-94, WITH COIL CAR CONVEYOR S/N 80028732

2329 1 LITTELL STRAIGHTNER/FEEDER/SHEAR - 7 ûROLL PRECISION CABINET STRAIGHTENER, CASCADE ROLLS, 30ö LITTELL FEEDER, 30'' ALPHA 4 û POST CUTOFF/EMBOSSER, BELT CONVEYOR, BLANK STACKER

2330 1 AMERICAN Mdl: 1000 UNCOILER - 10,000 CAP., 36''X 20'' DIA., (LOC. BLANK LINE 3)

2331 1 STRAIGHTNER - 36'' CAP., (LOC. BLANK LINE 3)

2332 1 EGAN FEEDER - 36'' CAP., (LOC. BLANK LINE 3)

2333 1 SHEER - 36'' CAP., (LOC. BLANK LINE 3)

2334 1 UNCOILER - 323'' CAP,, (LOC. MUFFLER CELL 1)

Printed:03/16/2014 13:38



www.biditup.com




2335 1 CWP Mdl: SMX36CSM COIL HANDLING EQUIPMENT - 32'' FEEDER, SHEAR/EMBOSSER AND EXIT BELT CONVEYOR, (LOC. MUFFLER CELL 1)

2336 1 ROW Mdl: 1603ODSL UNCOILER - 16,000 LB. CAP., 30''X 32'' DIA., (LOC. MUFFLER CELL 2) S/N 26196

2337 1 CWP Mdl: SMX30BSF COIL HANDLING EQUIPMENT - 30'' FEEDER, SHEAR/EMBOSSER AND EXIT BELT CONVEYOR, (LOC. MUFFLER CELL 2)

2338 1 ROW Mdl: SFDC2-30 COIL HANDLING EQUIPMENT - 30'' FEEDER, SHEAR/EMBOSSER, EMERSON CONTROLS AND EXIT BELT CONVEYOR, (LOC. MUFFLER CELL 4)

2339 1 ROW Mdl: 16030DSL UNCOILER - 16,000 LB. CAP., 30''X 32'' DIA., (LOC. MUFFLER CELL 5B) S/N 26198

2340 1 CWP Mdl: 3MX30BSF COIL HANDLING EQUIPMENT - 30'' FEEDER, SHEAR/EMBOSSER AND EXIT BELT CONVEYOR, (LOC. MUFFLER CELL 2) S/N 055410

2341 1 ROW Mdl: 1603ODS/L UNCOILER - 16,000 LB. CAP., 30''X 32'' DIA., (LOC. MUFFLER CELL 2) S/N 16074

2342 1 COIL HANDLING EQUIPMENT - 30'' FEEDER, SHEAR/EMBOSSER, INDRAMAT CONTROL AND EXIT BELT CONVEYOR, (LOC. MUFFLER CELL 4)

2342A 1 (2) ASSORTED SHEET FEEDER/STRAIGHTENER - IN NEED OF REPAIR, PARTS (LOC. BACK DOCK)

2343 1 JOHNSON 60 TON GAP FRAM PRESS - WITH SAFETY LIGHT CURTAIN, (LOC. SHORT PIPE CELL 2)

2344 1 JOHNSON 45 TON GAP FRAM PRESS - WITH SAFETY LIGHT CURTAIN, (LOC. SHORT PIPE CELL 2)

2345 1 FEDERAL 60 TON GAP FRAM PRESS - WITH SAFETY LIGHT CURTAIN, (LOC. UNIVERSAL CONVERTERS) S/N 60-351

2346 1 AUTOMATION SERVICES Mdl: 15 PAG GAP FRAM PRESS - 15 TON PRESS WITH SAFETY LIGHT CURTAIN, (LOC. DIRECT FIT CONVERTER) S/N 82610

2347 1 GREENERD TON GAP FRAM PRESS, Mdl: HPB-10 10, (LOC. DIRECT FIT CONVERTER) GREENERD HPB-10 S/N 19715391

2348 1 FEDERAL 60 TON GAP FRAM PRESS - 4'' STROKE, 22''X 32'' BED SPACE, 90 STROKES PER MIN., WITH SAFETY LIGHT CURTAIN, (LOC. UNIVERSAL CONVERTERS) S/N H24997

2349 1 BLISS Mdl: NO. 21 GAP FRAM PRESS

2350 1 GAP FRAM PRESS - HYDRAULIC, SINGLE STROKE, 3 HP. MOTOR, (LOC. PRESS BAY)



2352A 1 GAP FRAM PRESS - HYDRAULIC, SINGLE STROKE, 3 HP. MOTOR, (LOC. PRESS BAY)

2353 1 GAP FRAM PRESS - SAFETY LIGHT CURTAIN, (LOC. SHORT PIPE 3C)

2354 1 4 POST PRESS - HYDRAULIC PRESS, (LOC. SHORT PIPE 3C)

2355 1 GTS GAP FRAM PRESS - HYDRAULIC PRESS, 7.5 HP. MOTOR, (LOC. MUFFLER CELL 8A)

2356 1 GTS GAP FRAM PRESS - HYDRAULIC PRESS 7.5 HP. MOTOR, (LOC. MUFFLER CELL 8A)

2356A 1 BLISS 40 TON GAP FRAM PRESS - 40 TON PRESS, (LOC. MUFFLER CELL 8)

Printed:03/16/2014 13:38



www.biditup.com




2357 1 DAVI Mdl: MCA1200/S107 HYD 4 ROLL DOUBLE INITIAL PINCH BENDING - 48ö X 10 GA, CNC CONTROL, VERTICAL SUPPORT, ENTRY CONVEYOR, BLANK LOADER, (LOC. HIGH PERFORMANCE) S/N 9440025

2358 1 PEXTO ELECTRIC SHEET FORMER - 32'' (LOC. MUFFLER CELL 8)

2359 1 PEXTO Mdl: 3416-T ELECTRIC SHEET FORMER - 34''X 6 GA. (LOC. MUFFLER CELL 8) S/N 357-9-91

2360 1 TONE UNIT PRESS - HYD PRESS AND EXPANDING UNIT, FOR LOCKING TUBING TOGETHER, ( MUFFLER LINE 1)

2361 1 INNER UNIT MACHINE - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 1)

2362 1 INNER UNIT STUFFER - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 1)

2363 1 TONE UNIT STUFFER - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 1)

2364 1 VERTICAL SIZER WITH (2) TORQUE LOCK UNITS - (2) 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 1)


2366 1 (2) SPIRAL TORQUE LOCK UNITS - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 1)

2367 1 MULTI GUN WELDER MUFFLER BODY SPOT WELD MACHINE - (12) TIP SPOT WELDER, (LOC, MUFFLER CELL 1)

2368 1 TOOL RACK 2369 1 INNER UNIT STUFFER WITH (3)

SPIRAL TORQUE LOCK UNITS - (3) 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 2)




2373 1 (2) SIZER UNITS, (1) TORQUE LOCK UNIT - (2) 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 2)


2375 1 MULTI GUN WELDER MUFFLER BODY SPOT WELD MACHINE - (10) TIP SPOT WELDER, (LOC, MUFFLER CELL 2)

2376 1 HORIZONTAL FLANGER - 24'' TRAVEL, (3) 10 HP. MOTER HYD. POWER UNIT, (LOC, MUFFLER CELL 2)

2377 1 VERTICAL FLANGER - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8A)

2378 1 VERTICAL FLANGER - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8A)

2379 1 TONE UNIT STUFFER - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8A)

2380 1 STUFFER - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8A)

2381 1 INNER UNIT STUFFER - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8A)

2382 1 (2) SPIRAL TORQUE LOCK UNITS - 15 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8A)

2383 1 (2) TORQUE LOCK UNITS - 15 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8A)

2384 1 WEAN UNITED MULTI GUN WELDER - (6) TIP SPOT WELDER, 440 V. 158 KVA, (LOC, MUFFLER CELL 8A)

2385 1 VERTICAL SIZER - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8A)

Printed:03/16/2014 13:38



www.biditup.com









2391 1 (2) TORQUE LOCK UNITS - 15 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8)

2392 1 (2) SPIRELL LOCK UNITS - 15 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 8)

2393 1 MULTI GUN WELDER - (8) TIP SPOT WELDER, WITH ENTRON MODEL EN1001 CONTROLLER, (LOC, MUFFLER CELL 8A)

2394 1 TONE UNIT PRESS - 15 HP. HYD PRESS AND EXPANDING UNIT, FOR LOCKING TUBING TOGETHER, ( MUFFLER LINE 8)


2396 1 OMNITECK VERTICAL SIZER WITH (2) TORQUE LOCK UNITS - (2) 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 4)

2397 1 OMNITECK VERTICAL SIZER WITH (2) TORQUE LOCK UNITS - (2) 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 4)

2398 1 VERTICAL STUFFER WITH (2) SPIRAL LOCK UNITS - (2) 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 4)

2399 1 HYD HORIZONTAL FLANGER - (LOC, MUFFLER CELL 5B)

2400 1 INNER UNIT STUFFER - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 5B)

2401 1 VERTICAL SIZER WITH (2) TORQUE LOCK UNITS - (2) 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 5B)

2402 1 VERTICAL SIZER WITH (2) TORQUE LOCK UNITS - (2) 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 5B)

2403 1 VERTICAL STUFFER WITH (2) SPIRAL LOCK UNITS - (3) 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 5B)

2404 1 (2) SPIRAL LOCK UNITS - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 5B)

2405 1 (2) SIZER UNITS - 20 HP. HYD. POWER SUPPLY, (LOC, MUFFLER CELL 5B)

2406 1 (3) VIRTICAL SIZERS - (INCOMPLETE UNITS, PARTS), (LOC. BACK DOCK)

2407 1 EAGLE Mdl: OLXS 846 EMBOSS MUFFLER LINE/JACKET WRAPER - MATERIAL TRANSFER SYSTEM, EMBOSSER WITH FINAL MUFFLER WRAP STATION, (LOC, MUFFLER CELL 5B) S/N 90-613

2407A 1 EMBOSSER - MATERIAL TRANSFER SYSTEM, EMBOSSER, WITH ANOTHER MATERIAL TRANSFER BRIDGE IN BASKET, (LOC. AIDA)

2408 1 RACINE HYD PUMP UNIT - 60 HP. MOTOR, EXPORT TOOL & WELDING CO. CONTROL CABINET AND GEAR BOX, ON STAND, (PARTS TO SPINNER UNIT), (LOC, MUFFLER CELL 5B)

2409 1 RACINE HYD PUMP UNIT - 61 HP. MOTOR, EXPORT TOOL & WELDING CO. CONTROL CABINET AND GEAR BOX CONTROL CABINET AND GEAR BOX, ON FLOOR, (PARTS TO SPINNER UNIT), (LOC, MUFFLER CELL 5B)

2410 1 RACINE (7) ASSORTED HYD PUMP UNITS

2411 1 EAGLE Mdl: VRLK HYD. GRIDLOCK - 15 HP, 480 V, 3 PHASE, (LOC. AIDA)

Printed:03/16/2014 13:38



www.biditup.com




2412 1 EAGLE Mdl: VERT.RLK HYD. GRIDLOCK - 15 HP, 480 V, 3 PHASE, (LOC. AIDA)

2413 1 EAGLE Mdl: VRLK HYD. GRIDLOCK - 15 HP, 480 V, 3 PHASE, (LOC. AIDA) S/N 90-612

2414 1 EAGLE Mdl: VERT.RLK HYD. GRIDLOCK - 15 HP, 480 V, 3 PHASE, (LOC. AIDA) S/N 90607

2415 1 HYD. DOUBLE DOMER - 15 HP, 480 V, 3 PHASE, (LOC. AIDA)

2416 1 HYD. DOMER - 15 HP, 480 V, 3 PHASE, (LOC. AIDA)



2419 1 INNER UNIT - 15 HP. HYD. POWER SUPPLY, (LOC. AIDA)



2422 1 BASKET ASSORTED GRIDLOCK TOOLING, (LOC. AIDA)


















2440 1 BASKET ASSORTED DOMER TOOLING, (LOC. AIDA)





2445 1 EAGLE Mdl: SP-D BAS-823 HYD. HORIZONTAL INNER UNIT STUFFER - 25 HP. MOTOR, 480 V., 3 PHASE, 36'' BELT CONVEYOR, WITH (2) SPIRAL LOCK, 15 HP. HYD POWERED UNITS, (LOC. AIDA) S/N 93-794

2446 1 EAGLE Mdl: SP- CA-85 HYD. HORIZONTAL END CAPPER - (2) 10 HP. MOTOR, 480 V., 3 PHASE, (LOC. AIDA) S/N 93-796

2447 1 END CAPPER TOOLING - (1) PALLET ASSORTED END CAPPER TOOLING, (LOC. AIDA)



2450 1 STUFFER TOOLING - (1) PALLET HORIZONTAL STUFFER TOOLING, (LOC. AIDA)



Printed:03/16/2014 13:38



www.biditup.com








2457 1 BODY MANDREL - (7) MANDREL WITH STANDS, (LOC. AIDA)

2458 1 VERTICAL SIZER PUNCH TOOLING - (1) RACK, (LOC. MUFFLER CELL 8A)

2459 1 VERTICAL SIZER PUNCH TOOLING - (1) RACK, (LOC. MUFFLER CELL 8A)

2460 1 VERTICAL SIZER PUNCH TOOLING - (7) ASSORTED VERTICAL SIZER PUNCH WITH RINGS, (LOC. PIPE CELL 26)









2469 1 VERTICAL SIZER PUNCH TOOLING 2470 1 VERTICAL SIZER PUNCH TOOLING

- (1) CRATE ASSORTED VERTICAL SIZE PUNCHES, (LOC. PIPE CELL 26)

2471 1 VERTICAL SIZER PUNCH TOOLING - (1) CRATE ASSORTED VERTICAL SIZE PUNCHES, (LOC. PIPE CELL 26)









Printed:03/16/2014 13:38



www.biditup.com




























Printed:03/16/2014 13:38



www.biditup.com








2508 1 INNER BODY MACHINE TOOLING 2509 1 INNER BODY MACHINE TOOLING -

(1) CRATE ASSORTED TOOLING, (LOC. PIPE CELL 26)

2510 1 INNER BODY MACHINE TOOLING - (1) CRATE ASSORTED TOOLING, (LOC. PIPE CELL 26)
















2526 1 SPIRAL LOCK TOOLING - (1) CRATE ASSORTED TOOLING, (LOC. PIPE CELL 26)







2533 1 TORQUE LOCK TOOLING - (1) CRATE ASSORTED TOOLING, (LOC. PIPE CELL 26)



Printed:03/16/2014 13:38



www.biditup.com














2546 1 REDUCING DIES - (8) ASSORETED DIES IN CRATE, (LOC. PIPE CELL 26)
















2562 1 PROJECTION CUPS - (25) ASSORTED CUPS IN CRATE, (LOC. PIPE CELL 26)






Printed:03/16/2014 13:38



www.biditup.com


























2589A 1 PROJECTION CUPS - RACK OF ASSORTED CUPS, (LOC. MUFFLER CELL 8A)

2590 1 OD GAUGES - (1) PALLET ASSORTED GAUGES, (LOC. PIPE CELL 26)



2593 1 GE ELECTRIC MOTOR - 100 HP., 1150/2000 RPM, (LOC. MUFFLER CELL 2)

2594 1 GE ELECTRIC MOTOR - 100 HP., 1150/2000 RPM, (LOC. MUFFLER CELL 2)

2595 1 MARATHON ELECTRIC ELECTRIC MOTOR - 75 HP., 1775 RPM, (LOC. MUFFLER CELL 2)

2596 1 ELEKTRIMAX CORP. ELECTRIC MOTOR - NEW 30 HP. 1800 RPM, (LOC. MUFFLER CELL 2)

2597 1 (2) ASSORTED MOTORS, (1) 25 HP., (1) 15 HP., (LOC. MUFFLER CELL 2)

2598 1 (2) 20 HP. MOTORS WITH SPARE PARTS ON PALLET, (LOC. MUFFLER CELL 2)

Printed:03/16/2014 13:38



www.biditup.com




2599 1 30 HP. MOTORS WITH SPARE PARTS ON PALLET, (LOC. MUFFLER CELL 2)

2600 1 (4) ASSORTED MOTORS (1) 30 HP., (2) 20 HP., (1) 10 HP. MOTORS ON PALLET, (LOC. MUFFLER CELL 2)



2603 1 (15) HP. MOTOR, (LOC. MUFFLER CELL 2)

2604 1 40 HP. MOTOR WITH ASSORTED SPARE MACHINE PARTS ON PALLET, (LOC. MUFFLER CELL 2)

2605 1 5 HP. MOTOR SOLD WITH PUMP ON PALLET, (LOC. MUFFLER CELL 2)

2606 1 (4) ASSORTED MOTORS (1) 50 HP., (2) 15 HP., (1) .25 HP. MOTORS ON PALLET, (LOC. MUFFLER CELL 2)

2607 1 (4) ASSORTED MOTORS (1) 25 HP., (1) 15 HP., (1) 2 HP., (1) 1 HP. MOTORS ON PALLET, (LOC. MUFFLER CELL 2)

2608 1 (4) ASSORTED MOTORS WITH SPARE MACHINE PARTS ON PALLET, (LOC. MUFFLER CELL 2)



2611 1 (2) 30 HP. MOTORS ON PALLET, (LOC. MUFFLER CELL 2)

2612 1 (2) ASSORTED MOTORS (1) 15 HP., (1) 10 HP., MOTORS ON PALLET, (LOC. MUFFLER CELL 2)

2613 1 (17) ASSORTED MOTORS ON PALLET, (LOC. MUFFLER CELL 2)

2614 1 (10) ASSORTED MOTORS ON PALLET, (LOC. MUFFLER CELL 2)

2615 1 (10) ASSORTED SERVO MOTORS ON PALLET, (LOC. MUFFLER CELL 2)

2616 1 (11) ASSORTED GEAR REDUCERS, (LOC. MUFFLER CELL 2)

2617 1 (10) ASSORTED GEAR REDUCERS, (LOC. MUFFLER CELL 2)

2618 1 FEDERAL PACIFIC ELECTRIC TRANSFORMER - 34 KVA DRY TYPE, 230X460 PRIMARY V, 460/266 SECONDARY V., ELECTRIC TRANSFORMERS, (LOC. MUFFLER CELL 2)

2619 1 FEDERAL PACIFIC ELECTRIC TRANSFORMER - 34 KVA DRY TYPE, 230X460 PRIMARY V, 460/266 SECONDARY V., ELECTRIC TRANSFORMERS, (LOC. MUFFLER CELL 2)

2620 1 ELECTRIC TRANSFORMER - (2) ASSORTED TRANSFORMER ON PALLET, (LOC. MUFFLER CELL 2)

2620A 1 SIEMENS Mdl: SB2REV.A ELECTRIC SERVICE DISCONECT - ASSORTED NEW ELECTRICAL EQUIPMENT TO INCLUDE (1) ELECTRIC SERVICE DISCONNECT, SERVICE TYPE 1, WITH SIEMENS WLS27320 INTEGRATED CUBICLE BUS, 2000A CAP., 600 V MAX. (4) 400 AMP BREAKER PANELS, (12) SECTIONS CABLE TRAY, (4) ELECTRIC BOXES 68''X 20''X 6'', (LOC. WAREHOUSE)

2621 1 ELECTRIC BOXES AND SWITCHES - (1) PALLET OF ASSORTED SAFTEY SWITCHES AND ELECTRIC BOXES, (LOC. MUFFLER CELL 2)

2622 1 E. BOX Mdl: TYPE 1 ELECTRIC ENCLOSURE - NEW (LOC. MUFFLER CELL 2)

2623 1 ELECTRIC TRANSFORMER - PALLET OF ASSORTED ELECTRIC TRANSFORMES, (LOC. MUFFLER CELL 2)

2624 1 ELECTRIC BREAKERS - PALLET OF ASSORTED BREAKERS, (LOC. MUFFLER CELL 2)

2625 1 TELEMECANIQUE Mdl: ALTISTART 48 MOTOR CONTROLER - (LOC. MUFFLER CELL 2)

2626 1 TOSHIBA Mdl: BT 130 G7U4270B TRANSISTOR INVERTER - (LOC. MUFFLER CELL 2)

Printed:03/16/2014 13:38



www.biditup.com




2627 1 ABB Mdl: ACS600 MOTOR CONTROLER - (LOC. MUFFLER CELL 2)

2628 1 TOSHIBA Mdl: VT130G3U4270 TRANSISTOR INVERTER - (LOC. MUFFLER CELL 2)

2629 1 GASTON Mdl: ZYCOM 2005 MACHINE CONTROL - (LOC. MUFFLER CELL 2)

2630 1 BALDOR Mdl: VS1GV AC CLOSED VECTOR CONTROL - (LOC. MUFFLER CELL 2)

2631 1 BALDOR Mdl: MN 701 SERIES H BYNAMIC BRAKE - (LOC. MUFFLER CELL 2)

2632 1 AB ELECTRICAL COMPONENTS - (1) PALLET TO INCLUDE SLC500, AND ASSORTED COMPONENTS, (LOC. MUFFLER CELL 2)

2633 1 AB LOGIC CONTROL TRAYS - (2) PALLET, (LOC. MUFFLER CELL 2)

2634 1 AB INPUT MODULES - (1) PALLET, (LOC. MUFFLER CELL 2)

2635 1 WTC Mdl: WT500 (7) AUTOMATED WELDER CONTROL - (LOC. MUFFLER CELL 2)

2636 1 MOOG Mdl: 152M223 (6) BRUSHLESS PWM CONTROLER - (LOC. MUFFLER CELL 2)

2637 1 CIRCUIT BOARDS - PALLET OF ASSORTED CIRCUIT BOARDS, (LOC. MUFFLER CELL 2)

2638 1 MONITORS - PALLET OF ASSORTED PANEL VIEW MONITORS TO INCLUDE AB PANEL VIEW 900, (LOC. MUFFLER CELL 2)

2639 1 AB ASSORTED AB ELECTRICAL COMPONENTS - (1) PALLET, (LOC. MUFFLER CELL 2)

2640 1 ASSORTED AB ELECTRICAL COMPONENTS - (1) PALLET, (LOC. MUFFLER CELL 2)

2641 1 THERMATOOL ASSORTED WELD PARTS - (1) PALLET, (LOC. MUFFLER CELL 2)

2642 1 PALLET ASSORTED ELECTRIC WIRE, (LOC. MUFFLER CELL 2)








2650 1 ASSORTED LIQUID TIGHT FLEXIBLE CONDUIT - (2) PALLET, (LOC. MUFFLER CELL 2)

2651 1 PALLET ASSORTED BEARINGS, (LOC. MUFFLER CELL 2)




2655 1 CABINET - WITH CONTENT OF ASSORTED ELECTRICAL SUPPLIES AND PARTS, (LOC. MUFFLER CELL 2)

2655A 1 MAGNUM Mdl: MLT3660MM NIGHT BUSTER GENERATOR/LIGHT TOWER - 3 CYLINDER GAS MOTOR, 2205 HOURS, 120/240 V, 50/25 AMP, SINGLE PHASE, 1800 RPM,

2656 1 ELECTRICAL MAINTENANCE ROOM - CONTENTS OF ROOM, EXCLUDING LOTTED ITEMS, (LOC. MUFFLER CELL 2)

2656A 1 (8) SECTIONS SHELVING, MAINTENANCE PARTS ROOM MISC. - TO INCLUDED ASSORTED MOTORS, DRIVE CHAIN, SPROCKETS, FILTERS ANC MISC.

2656B 1 (8) SECTIONS SHELVING, MAINTENANCE PARTS ROOM MISC. - TO INCLUDED ASSORTED VALVES, HYDRAULIC CYLINDERS, GEAR REDUCERS ANC MISC.

Printed:03/16/2014 13:38



www.biditup.com




2656C 1 MAINTENANCE PARTS ROOM DRIVE BELTS AND MISC. - TO INCLUDED ASSORTED DRIVE BELTS ANC MISC.

2656D 1 (11) SECTIONS SHELVING MAINTENANCE PARTS ROOM MISC. - TO INCLUDED ASSORTED VALVES, HYDRAULIC CYLINDERS, BEARINGS, GEAR REDUCERS ANC MISC.

2656E 1 (22) SECTIONS SHELVING MAINTENANCE PARTS ROOM MISC. - TO INCLUDED ASSORTED VALVES, COPPER TUBING, PLASTIC TUBING, HYDRAULIC CYLINDERS, GEAR REDUCERS ANC MISC.

2656F 1 (3) SECTIONS SHELVING AND (4) CABINETS, MAINTENANCE PARTS ROOM MISC. - TO INCLUDE PPE, CLEANING SUPPLIES, LUBRICANTS AND MISC.

2657 1 IMCO ASSORTED SPRING BOLT KIT - CONTENT OF (2) SECTIONS RACKING, (LOC, WAREHOUSE)

2658 1 IMCO ASSORTED RUBBER INSULATOR - CONTENT OF (5) SECTIONS RACKING, (LOC, WAREHOUSE)

2659 1 IMCO ASSORTED GASKETS - CONTENT OF (6) SECTIONS RACKING, (LOC, WAREHOUSE)



2662 1 IMCO ASSORTED GASKETS - CONTENT OF (7 ) SECTIONS RACKING, (LOC, WAREHOUSE)

2663 1 IMCO ASSORTED HARDWARE - CONTENT OF (7) SECTIONS RACKING TO INCLUDE ASSORTED HANGERS AND GRUMMETS, (LOC, WAREHOUSE)

2664 1 IMCO ASSORTED HANGERS - CONTENT OF (1) SECTION PALLET RACKING, (LOC, WAREHOUSE)

2665 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGERS, RAIN COVERS, FLAT BAND SS CLAMPS, (LOC, WAREHOUSE)

2666 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGERS, CLAMPS, BRACKETS, (LOC, WAREHOUSE)





2671 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGERS, SPRING BOLT KITS, PIPE SHAPERS, PIPE CUTTERS, , (LOC, WAREHOUSE)

2672 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE AND SPLIT FLANG, (LOC, WAREHOUSE)

2673 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE, (LOC, WAREHOUSE)

2674 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE, BRACKETS, AND MUFFER STRAPS, (LOC, WAREHOUSE)

Printed:03/16/2014 13:38



www.biditup.com




2675 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE AND HANGERS, (LOC, WAREHOUSE)




2679 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGERS, (LOC, WAREHOUSE)

2680 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGERS AND RUBBER HOSE, (LOC, WAREHOUSE)

2681 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE, GASKET AND METAL PARTS BINS, (LOC, WAREHOUSE)

2682 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGER, SPRING KITS, RUBBER INSERTS AND PLASTIC PART BINS, (LOC, WAREHOUSE)

2683 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE, GASKET, BOLT SHOULDERS, (LOC, WAREHOUSE)

2684 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE, HANGERS, CONVERTER INSTALLATION KITS, (LOC, WAREHOUSE)

2685 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE, HANGERS, (LOC, WAREHOUSE)

2686 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE, HANGERS, BRACKETS, OXYGEN SENSOR FITTINGS, (LOC, WAREHOUSE)

2687 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE, HANGERS, BRACKETS, (LOC, WAREHOUSE)

2688 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE SPLIT FLANGE, HANGERS, BRACKETS, (LOC, WAREHOUSE)

2689 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE, BRACKETS, OXYGEN SENSOR FITTINGS, (LOC, WAREHOUSE)

2690 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE, BRACKETS, RUBBER INSULATORS, (LOC, WAREHOUSE)

2691 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLANGE, SPLIT FLANGE, BRACKETS, (LOC, WAREHOUSE)

2692 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FORMED WIRE HANGERS, (LOC, WAREHOUSE)

2693 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE ID-OD REDUCEWRS, TAIL PIPE, ADAPTERS, TURN DOWN SPOUTS, (LOC, WAREHOUSE)

Printed:03/16/2014 13:38



www.biditup.com




2694 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE, ADAPTERS, FORMED WIRE HANGERS, (LOC, WAREHOUSE)

2695 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE, ADAPTERS, (LOC, WAREHOUSE)





2700 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FORMED WIRE HANGERS AND STRAPS, (LOC, WAREHOUSE)

2701 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FORMED WIRE HANGERS AND HANGERS, (LOC, WAREHOUSE)

2702 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX REDUCER PIPE, (LOC, WAREHOUSE)

2703 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX REDUCER PIPE AND HANGERS , (LOC, WAREHOUSE)

2704 1 IMCO ASSORTED HARDWARE - (1) PALLET FLEX TUBING 2 1/4''X 10'', (LOC, WAREHOUSE)

2705 1 CATALYTIC CONVERTER TEMP TESTER - (1) PALLET APPROXIMATELY 120 NEW, (LOC, WAREHOUSE)

2706 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE MUFFLER STRAPS, FLEX TUBING AND RUBBER HOSE, (LOC, WAREHOUSE)

2707 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE SAWZALL BLADES AND MANUALS , (LOC, WAREHOUSE)


2709 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX TUBING, (LOC, WAREHOUSE)

2710 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX TUBING AND HANGERS, (LOC, WAREHOUSE)


2712 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMPS AND HANGERS, (LOC, WAREHOUSE)

2713 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE STRTAPS AND CHERRY BOMB STAINLESS STEEL TIPS, (LOC, WAREHOUSE)

2714 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE STRAPS AND HANGERS, (LOC, WAREHOUSE)

Printed:03/16/2014 13:38



www.biditup.com




2715 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE STRAPS AND BRACKETS AND RAIN COVERS, (LOC, WAREHOUSE)

2716 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE RUBBER HOSE AND RAIN COVERS, (LOC, WAREHOUSE)


2718 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE BRACKETS AND AIR TUBES, (LOC, WAREHOUSE)

2719 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMPS, (LOC, WAREHOUSE)



2722 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMPS, BRACKETS AND SPLIT FLANGES, (LOC, WAREHOUSE)

2723 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMPS, BRACKETS AND SPLIT FLANGES, (LOC, WAREHOUSE)

2724 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMPS, HANGERS AND FLANGES, (LOC, WAREHOUSE)

2725 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE GASKETS AND NUTS, (LOC, WAREHOUSE)

2726 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE MUFFLER STRAPS AND HANGERS, (LOC, WAREHOUSE)

2727 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMPS, BRACKETS, HANGERS AND FLANGES, (LOC, WAREHOUSE)









Printed:03/16/2014 13:38



www.biditup.com






2738 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMPS, BRACKETS AND RAIN COVERS, (LOC, WAREHOUSE)



2741 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMPS, BRACKETS AND FORMED WIRE, (LOC, WAREHOUSE)

2742 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE STRAPS AND FLEX REPAIR KITS, (LOC, WAREHOUSE)

2743 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMPS AND STRAPS, (LOC, WAREHOUSE)

2744 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX TUBING, (LOC, WAREHOUSE)


2746 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX TUBING AND HEAT SHEILD CLAMPS, (LOC, WAREHOUSE)


2748 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX TUBING AND HEAT SHEILD CLAMPS, (LOC, WAREHOUSE)

2749 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE STRAPS AND HANGERS, (LOC, WAREHOUSE)

2750 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE STRAPS, CLAMPS, RUBBER HOSE AND HANGERS, (LOC, WAREHOUSE)

2751 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE COLLECTORS AND RUBBER HOSE, (LOC, WAREHOUSE)

2752 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMP AND HANGERS, (LOC, WAREHOUSE)

2753 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMP AND STRAPS, (LOC, WAREHOUSE)

2754 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMP, (LOC, WAREHOUSE)

2755 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CLAMP, (LOC, WAREHOUSE)

2756 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE MUFFLER STRAPS, (LOC, WAREHOUSE)


Printed:03/16/2014 13:38



www.biditup.com





2759 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE MUFFLER STRAPS AND MUFFLER TIPS, (LOC, WAREHOUSE)

2760 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE MUFFLER STRAPS, CLAMPS AND BRACKETS, (LOC, WAREHOUSE)







2767 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE DIGITAL CONVERTER TEMP TESTERS, FLEX PIPE, FLANGES, (LOC, WAREHOUSE)


2769 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGERS, (LOC, WAREHOUSE)

2770 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE GASKETS, (LOC, WAREHOUSE)


2772 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE MUFFLER STRAPS AND CLAMPS, (LOC, WAREHOUSE)

2773 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGERS AND CLAMPS, (LOC, WAREHOUSE)

2774 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE MUFFLER STRAPS AND RUBBER HOSE, (LOC, WAREHOUSE)

2775 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX PIPE AND HEAT SHIELD, (LOC, WAREHOUSE)

2776 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX PIPE, (LOC, WAREHOUSE)



Printed:03/16/2014 13:38



www.biditup.com




2779 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FORMED WIRE HANGER, (LOC, WAREHOUSE)

2780 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FORMED WIRE HANGER, (LOC, WAREHOUSE)

2781 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FORMED WIRE HANGER AND STRAPS, (LOC, WAREHOUSE)

2782 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGER AND FLANGES, (LOC, WAREHOUSE)

2783 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE HANGER AND CLAMPS, (LOC, WAREHOUSE)

2784 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CHROME TRUCK STACKS, (LOC, WAREHOUSE)

2785 1 IMCO ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FORMED WIRE HANGERS AND FLEX PIPE, (LOC, WAREHOUSE)






2791 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE METAL WIRE DISPLAYS, (LOC, WAREHOUSE)

2792 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE APPROXIMATELY (125) NEW THREE WHEEL BARREL CARTS, (LOC, WAREHOUSE)


2794 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE APPROXIMATELY (100) NEW THREE WHEEL BARREL CARTS, (LOC, WAREHOUSE)

2795 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE APPROXIMATELY (70) NEW THREE WHEEL BARREL CARTS AND MISC. WIRE DISPLAYS, (LOC, WAREHOUSE)




Printed:03/16/2014 13:38



www.biditup.com




2799 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CONVERTER PLUGS, (LOC, WAREHOUSE)

2800 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE AUTOMOMOTIVE CATALYSTS, AND MISC. PLUGS, (LOC, WAREHOUSE)


2802 1 ASSORTED HARDWARE - (27) PALLETS OF ASSORTED HARDWARE AND MISC. TO INCLUDE, CLAMPS, HANGERS, MUFFLERS, FASTENERS, PIPES AND MAINT. SUPPLIES, (LOC, WAREHOUSE)

2803 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE RAIN COVERS, (LOC, WAREHOUSE)

2804 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CHERRY BOMB MUFFLERS AND HANGERS, (LOC, WAREHOUSE)

2805 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE ASSORTED MUFFLERS , (LOC, WAREHOUSE)

2806 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE ASSORTED MUFFLERS AND CLAMPS, (LOC, WAREHOUSE)

2807 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE ASSORTED PLASTIC BAGS 6''X8'', (LOC, WAREHOUSE)

2808 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE FLEX PIPE WITH FLANGE, (LOC, WAREHOUSE)

2809 1 ASSORTED EXHAUST PARTS - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CHERRY BOMB MUFFLER PRO KITSE, (LOC, WAREHOUSE)






2815 1 ASSORTED HARDWARE - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE RAIN COVERS, (LOC, WAREHOUSE)

2816 1 FORD Mdl: M-5230-M52 MUSTANG GT MUFFLER EXHAUST SYSTEM - (5) 1998 TO 2001, 4.6 L MUSTANG GT EXHAUST, (LOC, WAREHOUSE)

2817 1 ASSORTED EXHAUST PARTS - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CONVERTER KITS, MUFFLERS, (LOC, WAREHOUSE)

2818 1 ASSORTED EXHAUST PARTS - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE EXHAUST KITS, MUFFLERS, FLEX PIPE AND PIPE, (LOC, WAREHOUSE)

Printed:03/16/2014 13:38



www.biditup.com




2819 1 ASSORTED EXHAUST PARTS - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CHERRY BOMB EXHAUST KITS AND CONVERTER KITS, (LOC, WAREHOUSE)

2820 1 ASSORTED EXHAUST PARTS - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE EXHAUST KITS, MUFFLERS, FLEX PIPE AND PIPE, (LOC, WAREHOUSE)



2823 1 ASSORTED EXHAUST PARTS - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CONVERTER SENSORS AND FASTENERS, (LOC, WAREHOUSE)

2824 1 ASSORTED EXHAUST PARTS - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE (200) CHERRY BOMB VORTEX MUFFLERS AND ASSORTED MUFFLERS, (LOC, WAREHOUSE)

2825 1 ASSORTED EXHAUST PARTS - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CHERRY BOMB MUFFLER KITS, TIPS AND CONVERTER AIR TUBE KITS, (LOC, WAREHOUSE)

2826 1 ASSORTED EXHAUST PARTS - CONTENT OF (1) SECTION PALLET RACKING TO INCLUDE CHERRY BOMB MUFFLER KITS AND TIPS , (LOC, WAREHOUSE)

2827 1 ASSORTED HARDWARE AND MISC. - (15) CONTAINERS OF MISC. HARDWARE, MUFFLERS, PIPE, MACHINE PARTS AND HOSE, (LOC, WAREHOUSE)

2828 1 ASSORTED BOXES - (7) SECTIONS PALLET RACKING, CONTENTS ONLY, (LOC, WAREHOUSE)

2829 1 ASSORTED BOXES - (7) SECTIONS PALLET RACKING, CONTENTS ONLY, (LOC, WAREHOUSE)

2830 1 ASSORTED BOXES - APPROX. (220) 4'X 7', 4'X4' AND 4'X8' TOTAL, (LOC, WAREHOUSE)

2831 1 ASSORTED BOXES - APPROX. (150) 4'X4' , (LOC, WAREHOUSE)

2832 1 ASSORTED BOXES - APPROX. (150) TOTAL 4'X4' AND 4'X2' , (LOC, WAREHOUSE)

2833 1 ASSORTED BOXES - APPROX. (120) TOTAL 40''X18' AND 3'X3' , (LOC, WAREHOUSE)

2834 1 ASSORTED BOXES - APPROX. (75) TOTAL 65''X18' AND 4'X7' , (LOC, WAREHOUSE)

2835 1 ASSORTED BOXES - APPROX. (400) TOTAL ASSORTED SIZES , (LOC, WAREHOUSE)



2838 1 ASSORTED BOXES - APPROX. (250) TOTAL 18''X64'', (LOC, WAREHOUSE)

2839 1 MUSTANG Mdl: MD250 DYNOMOMETER - 1500 HP, FLOOR MOUNTED CHASSI, 2 WHEEL DRIVE LOW PROFILE HIGH PERFORMANCE, 175 MILES PER HOUR, 10.7ö ROLL DIAMETER, (LOC. R & D ROOM)

2840 1 CLAYTON Mdl: EC50010812 DYNOMOMETER - FLOOR MOUNTED, 175 PER HOUR MAX SPEED, 12.640 ROLLS, 108 WIDE, YEAR 2004, (LOC. R & D ROOM) S/N 11743

2841 1 FORWARD 12,000 LB AUTO/FORK TRUCK LIFT - 6Æ LIFT HEIGHT, 16Æ LENGTH OF PLATFORMS, (LOC. R & D ROOM) S/N 020KA4754

Printed:03/16/2014 13:38



www.biditup.com






2844 1 GEMINI Mdl: GP10AF AUTO LIFT - 10,000 LB. CAP., ADJUSTABLE LIFT ARMS, 6' LIFT HEIGHT, (LOC. R & D ROOM) S/N 0455281-03-054

2844A 1 SUPERFLOW Mdl: FF1200 FLOW BENCH - (LOC. R & D ROOM)

2845 1 NEDERMAN REAL TYPE POWER EXHAUST VENT - (LOC. R & D ROOM)

2846 1 IZUZU 14' BOX TRUCK - DIESEL, AUTO TRANSMISSION, 162,000 MILES, YEAR 2007, (LOC, OUTSIDE) VIN #3165

2847 1 IZUZU 14' BOX TRUCK - DIESEL, AUTO TRANSMISSION, 162,000 MILES, YEAR 2007, (LOC, OUTSIDE) VIN#6037

2848 1 IZUZU 14' BOX TRUCK - DIESEL, AUTO TRANSMISSION, 162,000 MILES, YEAR 2005, (LOC, OUTSIDE) VIN # 1302

2849 1 VOLVO WHITE TRUCK TRACTOR - DIESEL ENGINE, SINGLE AXLE, YEAR 1986, (LOC, OUTSIDE) VIN# 1WUABCJD8GN113122

2850 1 TOYOTA Mdl: 87GU30 LIFT TRUCK - 6000 LB. CAP., LP POWERED, SIDE SHIFT, FORK ADJUSTMENT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 11462

2851 1 TOYOTA Mdl: 7FGU25 LIFT TRUCK - 4500 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 81590

2852 1 MITSUBISHI Mdl: FGC25 LIFT TRUCK - 5000 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N AF823-00726

2853 1 MITSUBISHI Mdl: FGC25 LIFT TRUCK - 5000 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N AF82B-01557

2854 1 TOYOTA Mdl: 5FBC025 LIFT TRUCK - 4800 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 61332

2855 1 TOYOTA Mdl: 5FBC025 LIFT TRUCK - 4800 LB. CAP., ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 61805

2856 1 TOYOTA LIFT TRUCK - 4000 LB. CAP., LP OR GAS POWERED, ROTATING FORKS, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY)

2857 1 TOYOTA Mdl: 7FGCU30 LIFT TRUCK - 4800 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 69011

2858 1 MITSUBISHI Mdl: FG15K LIFT TRUCK - 3000 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N AF31A-50085

2859 1 CATERPILLAR Mdl: GP15 LIFT TRUCK - 3000 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY)

2860 1 TOYOTA Mdl: 5FBCU15 LIFT TRUCK - 2870 LB. CAP., ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 61101

2861 1 MITSUBISHI Mdl: FG15 LIFT TRUCK - 3000 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N AF31-50709

2862 1 CATERPILLAR Mdl: GP15 LIFT TRUCK - 3000 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 3AM02838

Printed:03/16/2014 13:38



www.biditup.com




2863 1 TOYOTA Mdl: 8FGU15 LIFT TRUCK - 2500 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 10739

2864 1 MITSUBISHI Mdl: FG15K LIFT TRUCK - 3000 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N AF31850200

2865 1 MITSUBISHI Mdl: FGC15K LIFT TRUCK - LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N AF81C-01702

2866 1 TOYOTA Mdl: 5FBE15 LIFT TRUCK - 2160 LB. CAP., THREE WHEEL, ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 26452


2868 1 KALMAR AC LIFT TRUCK - 2500 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY)

2869 1 MITSUBISHI Mdl: FGC15K LIFT TRUCK - LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N AF8BC02207

2870 1 TOYOTA LIFT TRUCK - ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY)

2871 1 MITSUBISHI Mdl: FG15K LIFT TRUCK - 3000 LB. CAP., LP POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N AF31A-50160

2872 1 TOYOTA Mdl: 7FBEU15 LIFT TRUCK - 3000 LB. CAP., THREE WHEEL, ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 18074

2873 1 TOYOTA LIFT TRUCK - THREE WHEEL, ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY)

2874 1 TOYOTA Mdl: 5FBE13 LIFT TRUCK - THREE WHEEL, ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 12093

2875 1 TOYOTA Mdl: 7FBEU15 LIFT TRUCK - 3000 LB. CAP., THREE WHEEL, ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. CRANE BAY) S/N 18068


2877 1 TOYOTA Mdl: 5FBCU15 LIFT TRUCK - 3000 LB. CAP., ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. WARE HOUSE DOCK) S/ 61100

2877A 1 TOYOTA Mdl: 5FBCU15 LIFT TRUCK - 3000 LB. CAP., ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. WARE HOUSE DOCK) S/ 64054

2878 1 TOYOTA Mdl: 5FBE13 LIFT TRUCK - 2560 LB. CAP., THREE WHEEL, ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES,( NO BATTERY), (LOC. WARE HOUSE DOCK) S/N 12753

2879 1 TOYOTA Mdl: 5FBE13 LIFT TRUCK - THREE WHEEL, ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. WARE HOUSE DOCK)

2880 1 TOYOTA LIFT TRUCK - ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, ( NO BATTERY), (LOC. WARE HOUSE DOCK)

Printed:03/16/2014 13:38



www.biditup.com




2881 1 TOYOTA Mdl: 5FBE13 LIFT TRUCK - 3000 LB. CAP., THREE WHEEL, ELECTRIC POWERED, SIDE SHIFT, 3 STAGE MAST, CUSHION TIRES, (LOC. WARE HOUSE DOCK) S/N 12186

2882 1 HYSTER Mdl: R30XMS2 STAND ON LIFT TRUCK - 3000 LB. CAP., THREE WHEEL, ELECTRIC POWERED, 3 STAGE MAST, 195'' MAX LIFT, CUSHION TIRES, (LOC. WARE HOUSE DOCK) S/N D174N02109A

2883 1 PRIME MOVER Mdl: OE35 STAND ON LIFT TRUCK - 1360 LB. CAP., THREE WHEEL, ELECTRIC POWERED, 3 STAGE MAST, CUSHION TIRES, (LOC. WARE HOUSE DOCK) S/N 0E35031176001

2884 1 PRIME MOVER Mdl: OE35 STAND ON LIFT TRUCK - 1360 LB. CAP., THREE WHEEL, ELECTRIC POWERED, 3 STAGE MAST, CUSHION TIRES, (LOC. WARE HOUSE DOCK) S/N OE35031173002

2885 1 TOYOTA 7BRU18 STAND UP LIFT TRUCK - 3500 LB. CAP., THREE WHEEL, ELECTRIC POWERED, 3 STAGE MAST, CUSHION TIRES, (LOC. WARE HOUSE DOCK) S/N 7BRU18-34150

2886 1 YALE ESC030ABN24TEO83 STAND UP LIFT TRUCK - 3500 LB. CAP., THREE WHEEL, ELECTRIC POWERED, 3 STAGE MAST, CUSHION TIRES, (LOC. WARE HOUSE DOCK) S/N A824NO7149W

2887 1 CROWN 30SP3671 STAND ON LIFT TRUCK - 3500 LB. CAP., THREE WHEEL, ELECTRIC POWERED, 3 STAGE MAST, CUSHION TIRES, (LOC. WARE HOUSE DOCK) S/N W-88330

2888 1 RAYMOND 112TM-FRE60 WALK BEHIND PALLET LIFT - 6000 LB. CAP., ELECTRIC, 24 VOLT BATTERY, ON BOARD COMPUTER, (LOC. CRANE BAY) S/N 112-95-15949

2889 1 RAYMOND 112TM-FRE60L WALK BEHIND PALLET LIFT - 6000 LB. CAP., ELECTRIC, 24 VOLT BATTERY, (LOC. CRANE BAY) S/N 112-96-18391

2890 1 RAYMOND 112TMFRE601 WALK BEHIND PALLET LIFT - 6000 LB. CAP., ELECTRIC, 24 VOLT BATTERY, ON BOARD COMPUTER, (LOC. CRANE BAY) S/N 112-99-26105

2891 1 RAYMOND 112TM-FRE60L WALK BEHIND PALLET LIFT - 6000 LB. CAP., ELECTRIC, 24 VOLT BATTERY, (LOC. CRANE BAY) S/N 112-97-18896

2892 1 TOYOTA WALK BEHIND PALLET LIFT - ELECTRIC, 24 VOLT BATTERY, (LOC. CRANE BAY)

2893 1 RAYMOND WALK BEHIND PALLET LIFT - 6000 LB. CAP., ELECTRIC, 24 VOLT BATTERY, (LOC. CRANE BAY) S/N 112-96-1676

2894 1 CARK STAND UP TUGGER - ELECTRIC 24 V, (LOC. CRANE BAY)

2895 1 CARK STAND UP TUGGER - ELECTRIC 24 V, (LOC. CRANE BAY)

2896 1 RAYMOND STAND UP TUGGER - ELECTRIC 24 V, (LOC. CRANE BAY)

2897 1 RAYMOND STAND UP TUGGER - ELECTRIC 24 V, (LOC. CRANE BAY)

2898 1 PACK MULE Mdl: PMT-500-6SA STAND UP TUGGER - ELECTRIC 24 V, (LOC. CRANE BAY) S/N PNT2539

2899 1 PACK MULE Mdl: PMT-500-6SA STAND UP TUGGER - ELECTRIC 24 V, (LOC. CRANE BAY) S/N PMT2540

2900 1 PACK MULE Mdl: SC-750CD STAND UP THREE WHEEL CART - ELECTRIC 24 V, 48'''X28'' BED, (LOC. CRANE BAY) S/N SC1074

2901 1 STAND UP THREE WHEEL CART - ELECTRIC 24 V, 48'''X28'' BED, (LOC. CRANE BAY)

2902 1 PACK MULE Mdl: SC-750CD STAND UP THREE WHEEL CART - ELECTRIC 24 V, 48'''X28'' BED, (LOC. CRANE BAY)

Printed:03/16/2014 13:38



www.biditup.com




2903 1 TYLOR DUNN Mdl: SC1-75 STAND UP THREE WHEEL CART - ELECTRIC 24 V, 1200 LB. CAP., 48'''X28'' BED, BUILT IN CHARGER, (LOC. CRANE BAY) S/N 135151

2904 1 PACK MULE STAND UP THREE WHEEL CART - ELECTRIC 24 V, 48'''X28'' BED, (LOC. CRANE BAY)


2906 1 PACK MULE STAND UP THREE WHEEL CART - ELECTRIC 24 V, 48'''X28'' BED, ON BOARD COMPUTER, (LOC. CRANE BAY)

2907 1 CUSHMAN Mdl: 898360 STAND UP THREE WHEEL CART - ELECTRIC 24 V, 48'''X28'' BED, (LOC. CRANE BAY) S/N 93003204



2910 1 SIT DOWN THREE WHEEL CART - ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY)

2911 1 PACK MULE Mdl: SC-750CD STAND UP THREE WHEEL CART - ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY)


2913 1 PACK MULE Mdl: SC-750CD STAND UP THREE WHEEL CART - ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY) S/N SC 1362


2915 1 PACK MULE Mdl: SC-750CD36V STAND UP THREE WHEEL CART - ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY)

2916 1 PACK MULE Mdl: SC-755-6SB STAND UP THREE WHEEL CART - ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY) S/N SC2010

2917 1 TAYLOR DUNN Mdl: SC1-75 STAND UP THREE WHEEL CART - ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY) S/N 135152



2920 1 PACK MULE Mdl: SC-755-6SB STAND UP THREE WHEEL CART - ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY) S/N SC2009


2922 1 PACK MULE Mdl: SC 750SB STAND UP THREE WHEEL CART - ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY) S/N SC1676



2925 1 PACK MULE Mdl: SC-750SB STAND UP THREE WHEEL CART - ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY) S/ SC2011

2926 1 PACK MULE STAND UP THREE WHEEL CART ELECTRIC 24 V, 24'''X28'' BED, (LOC. CRANE BAY)






Printed:03/16/2014 13:38



www.biditup.com







2935 1 PACK MULE STAND UP THREE WHEEL CART ELECTRIC 24 V, 24'''X28'' BED, (LOC. WAREHOUSE BACK DOCK)







2942 1 PACK MULE (2) STAND UP THREE WHEEL CART ELECTRIC 24 V, 24'''X28'' BED, (LOC. WAREHOUSE BACK DOCK)

2943 1 SKIJACK ELECTRIC SCISSOR LIFT 89''X 52'' PLATFORM, 24 V., WITH CHARGER, (LOC. CRANE BAY)

2944 1 UP-RIGHT Mdl: TIGER ELECTRIC SCISSOR LIFT - 94''X 48'' PLATFORM, 800 LB CAP., WITH CHARGER, (LOC. WAREHOUSE BACK DOCK)

2945 1 OPEN

2946 1 NILFISK ADVANCE Mdl: CAPTOR 4800 RIDING FLOOR SCRUBBER - (LOC. CRANE BAY) S/N 1945705

2947 1 TENNANT Mdl: 6080 WALK BEHIND FLOOR SCRUBBER - (LOC. WAREHOUSE BACK DOCK)

2948 1 BHS Mdl: BE-24-2 BATTERY CHANGE STATION - TO INCLUDE (6) MODEL BS18-8-DS, HILO RAMP, BHS BATTERY RACKS (NO CONTENT) , (LOC. WAREHOUSE BACK DOCK) S/N JQ22048

2949 1 BHS 10' A-FRAM CRANE BATTERY CHANGE STATION - TO INCLUDE 2 TON COFFING ELECTRIC HOIST, (3) BATTERY RACKS(NO CONTENT) AND 18' CRANE RAILS, (LOC. WAREHOUSE BACK DOCK)

2949A 1 SACKETT SYSTEMS INC. Mdl: B-PJTC24-V-DU BATTERY CHANGE CART - MOUNTED TO CROWN ELECTRIC PALLET JACK, MODEL 60PE-2, (LOC. WAREHOUSE BACK DOCK)

2950 1 HOBART 48 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK)

2951 1 WORK HORSE Mdl: 18Y 1050X3D 36 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N 05J25038

2952 1 EXIDE Mdl: D3E-18-1050 36 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N VD41006



2955 1 EXIDE Mdl: D3E-18-1050 36 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N VJ50339


Printed:03/16/2014 13:38



www.biditup.com





2958 1 C&D Mdl: IFR18HK750 36 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N MPI-258843

2959 1 HERTNER Mdl: 3TN12-550 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N LD3769

2960 1 HERTNER Mdl: 3TN12-550 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N LD3770

2961 1 HERTNER Mdl: 3TN12-550 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N FE7267

2962 1 HERTNER Mdl: 3TN12-550 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N HE8267

2963 1 HERTNER Mdl: 3TN12-550 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N FE7264

2964 1 HERTNER Mdl: 3TN12-550 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N HE8268

2965 1 HOBART Mdl: 880H3-18C 36 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N 497CS31959

2966 1 C&D Mdl: FR12HK850 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N LPIU877475

2967 1 C&D Mdl: FR12HK850 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N LPIU877326

2968 1 EXIDE Mdl: D1-12-550 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK)

2969 1 MAC Mdl: 12M45OB22 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N F25863

2970 1 DEKA 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK)

2971 1 EXIDE Mdl: G3-6-450 12 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK)

2972 1 LAMARCHE Mdl: A45D-70-12L-BDC3 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK)

2973 1 POWER FACTOR Mdl: 1PF12C-360SST 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK)








2981 1 (10) ASSORTED 24 V BATTERY CHARGER - ON PALLET (LOC. WAREHOUSE BACK DOCK)

Printed:03/16/2014 13:38



www.biditup.com




2982 1 GNB Mdl: SCRFLX-12-865S1 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N 99C0334S

2983 1 HOBART 36 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK)

2984 1 DEKA 36 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N 194DEK0354

2985 1 D&D 36 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N PTU793033



2988 1 EXIDE Mdl: WORKHOG 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N ZD49539

2989 1 EGALE Mdl: 3PFE12B-965EMEP 24 V BATTERY CHARGER - (LOC. WAREHOUSE BACK DOCK) S/N 99258

2990 1 EGALE Mdl: 3PFE18B-750EMES 36 V BATTERY CHARGER - (LOC. TUBE MILL) S/ 96092

2991 1 LIFEGUARD 36 V BATTERY CHARGER - (LOC. TUBE MILL)

2992 1 CEN Mdl: 18B075OJ3D 36 V BATTERY CHARGER - (LOC. TUBE MILL)

2993 1 C&D 24 V BATTERY CHARGER - (LOC. TUBE MILL)


2995 1 ELECTRO NETWORKS Mdl: 12V0600M3D 24 V BATTERY CHARGER - (LOC. TUBE MILL)


2997 1 HERTNER Mdl: AUTO 1000 24 V BATTERY CHARGER - (LOC. TUBE MILL) S/N HF8269

2998 1 HOBART Mdl: 1R12-450 24 V BATTERY CHARGER - (LOC. TUBE MILL)

2999 1 PRESISION Mdl: 1PF12B-600EMS 24 V BATTERY CHARGER - (LOC. TUBE MILL)

3000 1 DEKA 24 V BATTERY CHARGER - (LOC. TUBE MILL)

3001 1 EXIDE Mdl: D1-12-550 24 V BATTERY CHARGER - (LOC. TUBE MILL)

3002 1 LAMARCHE Mdl: A45D-70-12L-BDC3 24 V BATTERY CHARGER - (LOC. TUBE MILL)

3003 1 CLARK Mdl: 12V0600H3D 24 V BATTERY CHARGER - (LOC. TUBE MILL)

3004 1 C&D Mdl: EFR SERIES 24 V BATTERY CHARGER - (LOC. TUBE MILL)



3007 1 POWER FACTOR Mdl: 1PF12C-520SST 24 V BATTERY CHARGER - (LOC. TUBE MILL)

3008 1 (7) ASSORTED 24 V BATTERY CHARGER - ON PALLET (LOC. GLA)

3009 1 EXIDE Mdl: SYSTEM 3000 24 V BATTERY CHARGER - (LOC. HILO MAINT.)

3010 1 LAMARCHE Mdl: A45D-70-12L-BDC3 24 V BATTERY CHARGER - (LOC. WAREHOUSE DOCK 5 ) S/N H-1419-4

3011 1 C&D 36V BATTERY - (LOC. WAREHOUSE BACK DOCK)

3012 1 C&D Mdl: 12-C125-15 24 V BATTERY - (LOC. WAREHOUSE BACK DOCK) S/N 07RC10440

3013 1 Mdl: 12-C125-15 24 V BATTERY - (LOC. WAREHOUSE BACK DOCK) S/N 50106685

3014 1 C&D Mdl: 12-C125-15 24 V BATTERY - (LOC. WAREHOUSE BACK DOCK)

Printed:03/16/2014 13:38



www.biditup.com




3015 1 24 V BATTERY - (LOC. WAREHOUSE BACK DOCK)

3016 1 LEGACY Mdl: 18-0085-13 36 V BATTERY - (LOC. WAREHOUSE BACK DOCK)

3017 1 GENERAL 36 V BATTERY - (LOC. WAREHOUSE BACK DOCK)

3018 1 SIP Mdl: 18-0085-13 36 V BATTERY - (LOC. WAREHOUSE BACK DOCK)

3019 1 C&D 24 V BATTERY - (LOC. WAREHOUSE BACK DOCK)

3020 1 C&D 24 V BATTERY - (LOC. WAREHOUSE BACK DOCK)

3021 1 GNB 24 V BATTERY - (LOC. WAREHOUSE BACK DOCK)

3022 1 LEGACY 24 V BATTERY - (LOC. WAREHOUSE BACK DOCK)

3023 1 (20) 12 V BATTERIES - REMAINING 12 VOLT BATTERIES IN CHARGING AREA, TO INCLUDE METAL FOUR PLACE BATTERY HOLDERS AND PALLET, (LOC. WAREHOUSE BACK DOCK)

3024 1 HARRINGTON 5 TON BRIDGE CRANE - DOUBLE GIRDER, 5 TON HARRINGTON HOIST, TOP RUNNING, 20' SPAN, 12' LIFT, 8 BUTTON PENDANT CONTROL, (LOC. PRESS BAY)

3025 1 HARRINGTON 5 TON BRIDGE CRANE - SINGLE GIRDER, 5 TON HARRINGTON HOIST, TOP RUNNING, 20' SPAN, 12' LIFT, 6 BUTTON PENDANT CONTROL, (LOC. PRESS BAY)

3026 1 150ÆX 20' BRIDGE CRANE RAIL SYSTEM - FREE STANDING, (LOC. PRESS BAY)

3027 1 GORBAL 4 TON JIB CRANE - 15' JIB, WITH SHAW BOX 3 TON HOIST, 8 BUTTON PENDENT TO OPERATE ROTATION, TRAVEL AND LIFT FUNCTIONS, (LOC. TUBE MILL)

3028 1 4 TON JIB CRANE - 15' JIB, WITH SHAW BOX 3 TON HOIST, 4 BUTTON PENDENT, (LOC. TUBE MILL)

3029 1 1/4 TON JIB CRANE - BUDGET HOIST, 2 BUTTON PENDENT, 12' JIB, 9' HEIGHT, (LOC. PRESS BAY)

3030 1 ROBBINS & MYERS DOUBLE GIRDER BRIDGE CRANE - NO HOIST, 42' WIDE BRIDGE X 480' RAILS,(LATE REMOVAL)

3031 1 COIL LIFT ATTACHMENT - 12'' THROAT, 22'' INSIDE CLEARANCE, (LOC. PRESS BAY)

3032 1 COIL LIFT ATTACHMENT - 12'' THROAT, 22'' INSIDE CLEARANCE, (LOC. PRESS BAY)

3033 1 SAFETY CAGE FORK LIFT ATTACHMENT - 4'X 3' , (LOC. WAREHOUSE BACK DOCK)

3034 1 BOOM EXTENSION FORK LIFT ATTACHMENT - 6' EXTENSION, (LOC. PRESS BAY)

3035 1 OMCG Mdl: 19A03 CNC MULTIPLE AXIS WIRE BENDER - 1/2ö CAPACITY, (LOC. TUBE MILL)

3036 1 OMCG Mdl: 19A13 CNC MULTIPLE AXIS WIRE BENDER - 1/2ö CAPACITY, (LOC. TUBE MILL)

3037 1 OMCG WIRE FEED UNCOILER - (LOC. TUBE MILL) S/N SM848

3038 1 WIRE FEED UNCOILER - (LOC. TUBE MILL)

3039 1 VIDEX Mdl: VAS-20-DVH 3/8ö U-BOLT FORMER - STRAIGHTENING, CUTTING, THREADING & BENDING, YEAR 1997, (LOC. TUBE MILL) S/N 354

3040 1 WIRE FEED UNCOILER - (LOC. TUBE MILL)

3041 1 DI-ACRO POWER ROD BENDER - (LOC. TUBE MILL)

3042 1 WIRE BRAKET BENDER - WITH (2) DCI 8000 SERIES COUNTER/TIMERS, (LOC. TUBE MILL)

Printed:03/16/2014 13:38



www.biditup.com




3042A 1 8'' UNIFLEX MODEL HM 660 UNIVERSAL CRIMPING MACHINE, UNIMATIC E PROGRAMMABLE CONTROL, ARTICLE MEMORY 400, CORRECTION VALVES PRESET FOR SPRING BACK, RS-232 INTERFACE, HORSEPOWER: 20 (2002) LOCATED IN LOS ANGELES, CA

3042B 1 8'' UNIFLEX MODEL HM 660 UNIVERSAL CRIMPING MACHINE, UNIMATIC E PROGRAMMABLE CONTROL, ARTICLE MEMORY 400, CORRECTION VALVES PRESET FOR SPRING BACK, RS-232 INTERFACE, HORSEPOWER: 20 (2002) LOCATED IN LOS ANGELES, CA

3043 1 (2) WIRE BASKETS OF 2 1/2'' THREADED U-BOLTS - (LOC. TUBE MILL)

3044 1 (2) WIRE BASKETS OF 2 1/4'' THREADED U-BOLTS - (LOC. TUBE MILL)

3045 1 (2) WIRE BASKETS OF 2'' THREADED U-BOLTS - (LOC. TUBE MILL)

3046 1 (45) PLASTIC CONTAINERS OF U-BOLT - TO INCLUDE PALLET OF ROD, (LOC. TUBE MILL)

3047 1 ASSORTED U-BOLT CLAMPS - CONTENT OF RACK ONLY, (LOC. TUBE MILL)

3048 1 (3) ASSORTED ROLLS OF U-BOLT/BRACKET WIRE - (LOC. PRESS BAY DOCK)

3049 1 U-BOLT/BRACKET WIRE - BRIGHT WIRE, .2710 GAUGE, 3690 LB., (LOC. BOX DOCK)

3049A 1 U-BOLT/BRACKET WIRE - BRIGHT WIRE, .2710 GAUGE, 3720 LB., (LOC. BOX DOCK)

3049B 1 U-BOLT/BRACKET WIRE - BRIGHT WIRE, .3120 GAUGE, 3418 LB., (LOC. BOX DOCK)

3049C 1 U-BOLT/BRACKET WIRE - BRIGHT WIRE, .3120 GAUGE, 5800 LB., (LOC. BOX DOCK)

3049D 1 U-BOLT/BRACKET WIRE - ASSORTED BRIGHT WIRE, APPROX. 5800 LB., (LOC. BOX DOCK)

3050 1 MONLON Mdl: VM-40 COOLANT/FILTER SYSTEM - TO INCLUDE PIPE TO TUBE MILLS, (LOC. TUBE MILL) S/N 99M-10142

3051 1 COIL STEEL - ELECTRO GALVANIZED, 597 LB., .060 GAUGE, 5'' WIDE, (LOC. STEEL RECEIVING)









3060 1 COIL STEEL - ALUMINIZED, 2080 LB., .016 GAUGE, 23.5'' WIDE, (LOC. STEEL RECEIVING)

3061 1 COIL STEEL - ELECTRO GALVANIZED, 5270 LB., .028 GAUGE, 24.75'' WIDE, (LOC. STEEL RECEIVING)

3062 1 COIL STEEL - (4) COILS ALUMINIZED, 1413 LB., .041 GAUGE, 5.95 WIDE, (LOC. STEEL RECEIVING)

3063 1 COIL STEEL - (4) COILS ALUMINIZED, 1448 LB., .041 GAUGE, 5.95 WIDE, (LOC. STEEL RECEIVING)

Printed:03/16/2014 13:38



www.biditup.com

















3077 1 COIL STEEL - STAINLESS 409, 2200 LB., .047 GAUGE, 12.5'' WIDE, (LOC. STEEL RECEIVING)


3079 1 COIL STEEL - ALUMINIZED, 3027 LB., .016 GAUGE, 9'' WIDE, (LOC. STEEL RECEIVING)



3082 1 COIL STEEL - (5) ASSORTED ELECTRO GALVANIZED PARTIAL COILS, (LOC. STEEL RECEIVING)

3083 1 COIL STEEL - (2) COILS ALUMINIZED,( 4265 LB. TOTAL) .016 GAUGE, 9'' WIDE, (LOC. STEEL RECEIVING)









Printed:03/16/2014 13:38



www.biditup.com














3102 1 COIL STEEL - ALUMINIZED CARBON, 2430 LB., .041 GAUGE, 11'' WIDE, (LOC. STEEL RECEIVING)





3107 1 COIL STEEL - (3) ELECTRO GALVANIZED, 1660 LB., .060 GAUGE, 10.750'' WIDE, (LOC. STEEL RECEIVING)






3113 1 COIL STEEL - (2) ALUMINIZED, 2645 LB., .022 GAUGE, 11.250'' WIDE, (LOC. STEEL RECEIVING)





3118 1 COIL STEEL - (3) ELECTRO GALVANIZED, 3875 LB., .032 GAUGE, 10'' WIDE, (LOC. STEEL RECEIVING)

3119 1 COIL STEEL - (3) ELECTRO GALVANIZED, 3800 LB., .032 GAUGE, 10'' WIDE, (LOC. STEEL RECEIVING)

Printed:03/16/2014 13:38



www.biditup.com






3122 1 COIL STEEL - STAINLESS 409, 3060 LB., .047 GAUGE, 10'' WIDE, (LOC. STEEL RECEIVING)









3131 1 COIL STEEL - (5) COILS ALUMINIZED, 3370 LB., .072 GAUGE, 8.656'' WIDE, (LOC. STEEL RECEIVING)



3134 1 COIL STEEL - (2) COILS HOT ROLLED, 1945 LB., .090 GAUGE, 4.48'' WIDE, (LOC. STEEL RECEIVING)



3137 1 COIL STEEL - (2) COILS ELECTRO GALVANIZED, 3536 LB. TOTAL WEIGHT, .032 GAUGE, 4.850'' WIDE, (LOC. STEEL RECEIVING)

3138 1 COIL STEEL - (2) COILS ALUMINIZED, 3386 LB. TOTAL WEIGHT, .060 GAUGE, 5.085'' WIDE, (LOC. STEEL RECEIVING)

3139 1 COIL STEEL - (4) COILS ELECTRO GALVANIZED, 1040 LB. TOTAL WEIGHT, .060 GAUGE, 4'' WIDE, (LOC. STEEL RECEIVING)

3140 1 COIL STEEL - (2) COILS ELECTRO GALVANIZED, 1545 LB., .090 GAUGE, 4.72'' WIDE, (LOC. STEEL RECEIVING)

3141 1 COIL STEEL - (2) COILS ELECTRO GALVANIZED, 1370 LB., .090 GAUGE, 4.21'' WIDE, (LOC. STEEL RECEIVING)



3144 1 COIL STEEL - STAINLESS 409, 3416 LB., .047 GAUGE, 10'' WIDE, (LOC. STEEL RECEIVING)


3146 1 COIL STEEL - (4) COILS OF ASSORTED PARTIAL ROLLS, (LOC. STEEL RECEIVING)

3147 1 COIL STEEL - STAINLESS 409, PARTIAL ROOL., .047 GAUGE, 10'' WIDE, (LOC. STEEL RECEIVING)

Printed:03/16/2014 13:38



www.biditup.com




3148 1 COIL STEEL - STAINLESS 409, PARTIAL ROLL., .047 GAUGE, 10'' WIDE, (LOC. STEEL RECEIVING)


3150 1 COIL STEEL - COILS ELECTRO GALVANIZED, 2800 LB., .032 GAUGE, 18.937'' WIDE, (LOC. STEEL RECEIVING)

3151 1 COIL STEEL - (17) ASSORTED PARTIAL COILS, (LOC. STEEL RECEIVING)






3157 1 COIL STEEL - (2) HOR ROLL, 2115 LB., .095 GAUGE, 4.48 WIDE, AND (2) COILS BRACKET STEEL, 535 LB., .080 GAUGE, 1.25 WIDE, (LOC. STEEL RECEIVING)

3158 1 COIL STEEL - (12) COILS BRACKET STEEL, 316 LB., .1875 GAUGE, 1.25 WIDE, (LOC. STEEL RECEIVING)

3159 1 COIL STEEL - (12) ASSORTED PERFORATED COILS, (LOC. STEEL RECEIVING)

3160 1 DOUGLAS MACHINE Mdl: M4730 AUTO BOXER - YEAR 12/01, 32ö BLANK HEIGHT, 60ö BLANK WIDTH, AUTO FEED, (LOC. PRESS BAY) S/N M4730

3161 1 DOUGLAS MACHINE Mdl: IMWACPHL AUTO BOXER - ALLEN-BRADLEY CONTROL PANEL, SPEED 12 BOXES PER MINUTE, 30ö X 60ö BLANK HEIGHT & INFEED HEIGHT, 36ö INFEED HEIGHT & DISCHARGE HEIGHT, 48''X 80'' BELT CONVEYOR, YEAR 2001, (LOC. MUFFLER CELL 5B) S/N M4565

3162 1 CENTRAL PRODUCTS CO. Mdl: CP-433S CARTON SEALING TAPE SYSTEM - 30'' MAX. WIDTH, (LOC. MUFFLER CELL 5B) S/N 98C008

3163 1 Mdl: HOT GLUE BOXING SYSTEM - VALCO MELTON EC-4 HOT GLUE MACHINE, APPROX. 4' WIDTH CAP., WITH 28''X 24'' SCISSOR LIFT TABLE, (LOC. RD AREA)

3164 1 HOT GLUE BOXING SYSTEM - NORDSON PRO BLUE 7 HOT GLUE MACHINE, APPROX. 4' WIDTH CAP., WITH 28''X 24'' SCISSOR LIFT TABLE, (LOC. RD AREA)

3164A 1 FALCO MELTON Mdl: EC-8 HOT GLUE BOXING SYSTEM - WITH PALLET OF GLUE STICKS, (LOC. UNIVERSAL CONVERTERS) S/N 13338

3165 1 TAPE BOXING SYSTEM - APPROX. 4' WIDTH CAP., WITH 28''X 24'' SCISSOR LIFT TABLE, (LOC. RD AREA)

3166 1 LOVESHAW Mdl: SP-10 TAPE BOXING SYSTEM - APPROX. 4' WIDTH CAP., 110 V, SINGLE PHASE, (LOC. RD AREA) S/N 199293600

3167 1 LANTECH Mdl: Q1000 AUTOMATIC SHRINK WRAPPING CELL - 460 V, 10Æ X 4Æ ENTRY ROLLER CONVEYER, 4Æ X 5Æ TURN TABLE, 10Æ X 4Æ EXIT DISCHARGE CONVEYOR, 5Æ WRAPPING HEIGHT, (LOC. RD AREA)

Printed:03/16/2014 13:38



www.biditup.com




3168 1 LANTECH Mdl: Q1000 AUTOMATIC SHRINK WRAPPING CELL - 460 V, 10Æ X 4Æ ENTRY ROLLER CONVEYER, 4Æ X 5Æ TURN TABLE, 10Æ X 4Æ EXIT DISCHARGE CONVEYOR, 5Æ WRAPPING HEIGHT S/N QA001202

3169 1 LANTECH MANUAL SHRINK WRAPPING MACHINE - (LOC. BOX DOCK)

3170 1 LANTECH Mdl: V-SERIES MANUAL SHRINK WRAPPING MACHINE - (LOC. BOX DOCK)

3171 1 SIGNODE Mdl: ELSF-10323 MANUAL SHRINK WRAPPING MACHINE - (LOC. PRESS BAY)

3172 1 UNIVERSAL Mdl: UV48X30PPJ ABRASIVE BLAST CABINET - (LOC. MACHINE SHOP) S/N 0407921

3173 1 TRINCO Mdl: 42X24/RC ABRASIVE BLAST CABINET - (LOC. RD AREA) S/N 2586973

3174 1 LUCIFER Mdl: RD7-KHE 24 OVEN - 2200 DEGREESE F MAX, 12''X 14''X 22'', 460 V, (LOC. MACHINE SHOP) S/N 7417

3175 1 LUCIFER Mdl: HL 7-A12 OVEN - 2300 DEGREESE F MAX, 9''X 9''X 15'', 230/460 V, (LOC. MACHINE SHOP) S/N 4941

3176 1 PAINT BOOTH - 30'X 15' X10'H WITH MICROAIR EXHAUST

3177 1 COOPER-WEYMOUTH, PETERSON SCRAP CHOPPER - 12'' WIDTH, .078 THICKNESS CAP., 1.5 HP., 220 V, 3 PHASE, (LOC. PRESS BAY) S/N C8330

3178 1 SCRAP CHOPPER - 12'' WIDTH, .078 THICKNESS CAP., 1.5 HP., 220 V, 3 PHASE, (LOC. PRESS BAY)




3182 1 KELLEY ATLANTIC INC. HYDRAULIC LIFT TABLE - 4000 LB CAP., 46'' X 52'' PLATFORM, (LOC. R&D)

3183 1 EOCONO LIFT Mdl: D0-SL38-20 HYDRAULIC LIFT TABLE - 2000 LB CAP., 46'' X 52'' PLATFORM, (LOC. R&D)



3186 1 AMERICAN LIFTS Mdl: P36-020 HYDRAULIC LIFT TABLE - 2000 LB CAP., 24'' X 48'' PLATFORM, WITH 10'X 42'' ROLLER CONVEYOR, (LOC. R&D)





3191 1 VESTIL HYDRAULIC LIFT TABLE - 2000 LB CAP., 24'' X 48'' PLATFORM, ON FOUR WHEEL CART, (LOC. WAREHOUSE)

3192 1 HYDRAULIC LIFT TABLE - 2000 LB CAP., 24'' X 48'' PLATFORM,, (LOC. WAREHOUSE)

Printed:03/16/2014 13:38



www.biditup.com
















3205 1 HYDRAULIC LIFT TABLE - 2000 LB CAP WITH ROLLER CONVEYOR TOP,, (LOC. WAREHOUSE)




3209 1 COLLAPSIBLE ROLLER CONVEYOR - 21'' EXTENDED, (LOC. WAREHOUSE)

3210 1 BELT CONVEYOR - 3'X 11', (LOC. WAREHOUSE)






3216 1 (2) ASSORTED BELT CONVEYORS - 18''X 10' AND 18''X5', (LOC. WAREHOUSE)

3217 1 (7) ASSORTED GRAVITY FEED CONVEYORS - (LOC. WAREHOUSE)



3220 1 CLIPPER Mdl: 12 BELT LACER - MOUNTED ON FOUR WHEEL STAND, (LOC. WAREHOUSE)

3221 1 CLIPPER Mdl: 12 BELT LACER - MOUNTED ON FOUR WHEEL STAND, (LOC. WAREHOUSE)

3222 1 ASSORTED CONVEYOR BELTS - (LOC. WAREHOUSE)

3223 1 ROURA HOPPER - CHIP DUMP HOPPER ON CASTERS - (LOC. WAREHOUSE)





Printed:03/16/2014 13:38



www.biditup.com






3230 1 JESCO - .33 YARD CAP. DUMP HOPPER ON CASTERS - (LOC. WAREHOUSE)

3231 1 ROURA HOPPER - DUMP HOPPER ON CASTERS - (LOC. WAREHOUSE)





3236 1 JESCO - DUMP HOPPER ON CASTERS - (LOC. WAREHOUSE)


3238 1 JESCO - .33 YARD CAP. DUMP HOPPER ON CASTERS - (LOC. WAREHOUSE)





3243 1 ROURA HOPPER - DUMP HOPPER - (LOC. WAREHOUSE)

3244 1 JESCO - DUMP HOPPER - (LOC. WAREHOUSE)

3244A 1 ROURA HOPPER - DUMP HOPPER ON CASTERS - (LOC. WAREHOUSE PIPE DOCK)

3244B 1 ROURA HOPPER - DUMP HOPPER ON CASTERS - (LOC. WAREHOUSE PIPE DOCK)

3244C 1 ROURA HOPPER - DUMP HOPPER ON CASTERS - (LOC. WAREHOUSE PIPE DOCK)

3244D 1 JESCO - DUMP HOPPER ON CASTERS - (LOC. PAINT SHOP)

3244E 1 JESCO - 1.5 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. PAINT SHOP)

3244F 1 1.5 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. PAINT SHOP)

3244G 1 1 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. PAINT SHOP)

3244H 1 1 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. PAINT SHOP)

3244I 1 1 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. PAINT SHOP)

3244J 1 1 YARD DUMP HOPPER - WITH CONTENT OF METAL, (LOC. PAINT SHOP)

3244K 1 1 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. PAINT SHOP)

3244L 1 1 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. PAINT SHOP)

3244M 1 1 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. PAINT SHOP)

3244N 1 1.5 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. OUTSIDE)

3244O 1 1.5 YARD DUMP HOPPER - WITH CONTENT OF METAL, (LOC. OUTSIDE)

3244P 1 1 YARD DUMP HOPPER ON CASTERS - WITH CONTENT OF METAL, (LOC. OUTSIDE)

3245 1 PALLET RACKING - (14) SECTIONS, 16'X 42'' UPRIGHTS, 8' CROSS BEAMS, SOME WIRE DECKING

Printed:03/16/2014 13:38



www.biditup.com












3254 1 PALLET RACKING - (14) SECTIONS, 16'X 42'' UPRIGHTS, 8' CROSS BEAMS

















3271 1 PALLET RACKING - (14) SECTIONS, 16'X 42'' UPRIGHTS, 8' CROSS BEAMS WITH SOME WIRE DECKING





Printed:03/16/2014 13:38



www.biditup.com





3277 1 PALLET RACKING - (9) SECTIONS, 16'X 42'' UPRIGHTS, 8' CROSS BEAMS, CROSS BEEMS ARE WELDED, WOOD DECKING






3283 1 PALLET RACKING - (12) SECTIONS, 16'X 42'' UPRIGHTS, 8' CROSS BEAMS WITH WIRE DECKING













3296 1 (8) SECTIONS, 16'X 42'' UPRIGHTS, 8' CROSS BEAMS WITH SOME WIRE DECKING







Printed:03/16/2014 13:38



www.biditup.com




3303 1 PALLET RACKING - (16) SECTIONS, 16'X 42'' UPRIGHTS, 8' CROSS BEAMS WITH METAL PALLET DECKING

3304 1 PALLET RACKING - (13) SECTIONS, ASSORTED 14' AND 16'X 42'' UPRIGHTS, 8' CROSS BEAMS WITH SOME WIRE DECKING

3304A 1 PALLET RACKING - (9) SECTIONS, 16'X 42'' UPRIGHTS, 8' CROSS BEAMS WITH WIRE DECKING

3305 1 PALLET RACKING - (6) SECTIONS, 12'X 48'' BLUE UPRIGHTS, 8' CROSS BEAMS WIRE DECKING






3311 1 PALLET RACKING - (10) SECTIONS, 10'X 30'' UPRIGHTS, 8' CROSS BEAMS WITH SOME METAL PALLET DECKING

3312 1 PALLET RACKING - (17) SECTIONS, 10'X 42'' UPRIGHTS, 8' CROSS BEAMS (68) CROSS BEEMS TOTAL, NO DECKING














Printed:03/16/2014 13:38



www.biditup.com




























Printed:03/16/2014 13:38



www.biditup.com











3357 1 PALLET RACKING - (36 ) SECTIONS, 10'X 30'' UPRIGHTS, 8' CROSS BEAMS WITH SOME WIRE DECKING

3357A 1 CANTILEVER RACK - 16' TALL, 10' LONG, SIX SUPPORTS, (LOC. WAREHOUSE DOCK)

3357B 1 (2) PIPE RACKS - 16'X 7'X 5', (LOC. WAREHOUSE DOCK)

3357C 1 (2) PIPE RACKS - 10' LONG (LOC. PIPE CELL 5)

3357D 1 HEAVY DUTY DIE RACK - 17'X 28'' (LOC. PRESS BAY)

3357E 1 PALLET RACKING - (15) SECTIONS, 16''X 36'' UPRIGHTS, 8' CROSS BEEMS, (LOC. WAREHOUSE)

3357F 1 PALLET RACKING - (8) SECTIONS, 18''X 48'' UPRIGHTS, 8' CROSS BEEMS, (LOC. WAREHOUSE)

3358 1 (19) SECTIONS OF SELECTAFLOW GRAVITY FEED SHELVING - FOUR SHELVES PER SECTION, DOES NOT INCLUDE CONTENT

3359 1 (19) SECTIONS GRAVITY FEED SHELVING - FOUR SHELVES PER SECTION, DOES NOT INCLUDE CONTENT




3363 1 METAL MATERIAL CART - (10) FOUR WHEEL, THREE SIDED, 42''X 40'' X 77'', (LOC. WAREHOUSE)










Printed:03/16/2014 13:38



www.biditup.com




















3389 1 METAL MATERIAL CART û (9) FOUR WHEEL, THREE SIDED, 48''X 42'' X 72'', (LOC. WAREHOUSE)

3390 1 METAL MATERIAL CART û (21) FOUR WHEEL, THREE SIDED, 48''X 42'' X 72'', (LOC. WAREHOUSE)





3395 1 METAL MATERIAL CART - (15) ASSORTED FOUR WHEEL, THREE SIDED, 48''X 42'' X 72'', (LOC. WAREHOUSE)










Printed:03/16/2014 13:38



www.biditup.com




































Printed:03/16/2014 13:38



www.biditup.com






























3462B 1 METAL MATERIAL CART - APPROX. (60) ASSORTED FOUR WHEEL, THREE SIDED, (LOC. OUTSIDE)

3463 1 METAL WIRE BASKET - (26) ASSORTED WIRE BASKETS, APROX. 42''X 48'' X 30'', (LOC. WAREHOUSE)




Printed:03/16/2014 13:38



www.biditup.com
















3478A 1 METAL WIRE BASKET - (32) ASSORTED WIRE BASKETS, APROX. 42''X 48'' X 30'', (LOC. WAREHOUSE)

3478B 1 METAL WIRE BASKET - (44 ) ASSORTED WIRE BASKETS, APROX. 42''X 48'' X 30'', (LOC. WAREHOUSE)

3479 1 STACKABLE PLASTIC TOTES - (11) 45''X 48'' COLAPSING, (LOC. WAREHOUSE)









3488 1 PLASTIC MILK CRATE - (504) 13''X 19'' 10'' DEEP, 12 PALLETS, (LOC. WAREHOUSE)





Printed:03/16/2014 13:39



www.biditup.com






3495 1 PLASTIC MILK CRATE - (10) PALLETS OF ASSORTED PLASTIC CONTAINERS, CRATES AND FLIP TOP CONTAINERS, (LOC. WAREHOUSE IN FRONT OF R&D)

3496 1 PLASTIC FLIP TOP CONTAINERS - (10) PALLETS ASSORTED CONTAINERS, (LOC. BACK WAREHOUSE)

3497 1 PLASTIC FLIP TOP CONTAINERS & MILK CRATE TYPE - (7) PALLETS ASSORTED CONTAINERS, (LOC. BACK WAREHOUSE)





3502 1 PEDESTAL SHOP FANS - (5) ASSORTED 24'' TO 28'' FANS, (LOC. WAREHOUSE)


3504 1 PEDESTAL SHOP FANS û (6) ASSORTED 24'' TO 28'' FANS, (LOC. WAREHOUSE)



















Printed:03/16/2014 13:39



www.biditup.com






3525 1 42'' BARREL FAN - TWO WHEEL, (LOC. WAREHOUSE)












3537 1 AMERICRAFT Mdl: 36DA-3H-T 36'' BARREL FAN - ON TWO WHEEL STAND, 230 V, 3 PHASE, (LOC. WAREHOUSE)

3538 1 (3) ASSORTED BARREL FAN - TWO WHEEL, (LOC. WAREHOUSE)

3539 1 48'' SHOP FAN - FOUR WHEEL, (LOC. WAREHOUSE)

3540 1 48'' SHOP FAN - FOUR WHEEL, (LOC. WAREHOUSE)

3541 1 36 '' SHOP FAN - FOUR WHEEL, (LOC. WAREHOUSE)

3542 1 ASSORTED HANGING BARREL FAN - (12) HANGING FROM CEILING , (LOC. WAREHOUSE)



3545 1 ASSORTED HANGING BARREL FAN - (10) HANGING FROM CEILING , (LOC. BACK WAREHOUSE)

3546 1 (6) RUBBERMAID SHOP CARTS - (LOC. WAREHOUSE)

3547 1 (16) ASSORTED METAL CARTS - (LOC. WAREHOUSE)



3550 1 (11) ASSORTED METAL BASKETS AND CARTS - (LOC. WAREHOUSE)



3553 1 ASSORTED SHOPING CARTS, TABLES AND CARTS - (LOC. WAREHOUSE)

3554 1 ASSORTED METAL BENCHES, TABLES, RACKS, CABINETS AND WOOD OFFICE DESK (LOC. WAREHOUSE)

3555 1 ASSORTED METAL BENCHES AND RACKS (LOC. WAREHOUSE)

3556 1 ASSORTED METAL SHOP FLOOR DESKS (LOC. WAREHOUSE)

3557 1 ASSORTED METAL RACKS USED FOR MILK CRATE PARTS SUPPLY, (LOC. WAREHOUSE)

3558 1 ASSORTED METAL RACKS USED FOR MILK CRATE PARTS SUPPLY, (LOC. WAREHOUSE)

3559 1 ASSORTED METAL RACKS AND TABLES (LOC. WAREHOUSE)

3560 1 ASSORTED METAL TABLES, CARTS AND RACKS (LOC. WAREHOUSE)

3561 1 (20) WIRE BASKETS WITH CONTENT OF METAL AND MISC. SCRAP (LOC. WAREHOUSE)

3562 1 (20) WIRE BASKETS WITH CONTENT OF METAL AND MISC. SCRAP (LOC. WAREHOUSE)

Printed:03/16/2014 13:39



www.biditup.com




3563 1 (6) HEAVY DUTY ROLLER DIE CARTS 22''X 22'' (LOC. WAREHOUSE)

3564 1 (24) METAL MATERIAL CAGE WITH CONTENT OF PIPE AND MUFFLER SCRAP (LOC. WAREHOUSE)




3568 1 MISC LOT TO INCLUDE DESKS, CABINETS, CHAIRS, OFFICE CUBICLES AND MISC., (LOC. PIPE DOCK)

3569 1 (46) WIRE BASKETS WITH CONTENT OF MUFFLER PARTS (LOC. PAINT SHOP)

3570 1 (20) FIXTURE RACKS 24' LONG, (LOC. PAINT SHOP)

3571 1 MEZZANINE AND FIXTURE RACKING FREE STANDING MEZZANINE WITH FIXTURE RACKING, ELEVATOR AND MISC., NOT TO INCLUDE LOTTED CABINETS, (LOC. PIPE CELL 7)

3572 1 FACILITY MAINT. AND MISC. MACHINE PARTS STORAGE ROOM TO INCLUDE RACKING, RUBBER HOSE, ELECTRICAL EQUIP., PLATFORM SCALE AND MISC. (LOC. OUT SIDE STORAGE)

3573 1 FACILITY MAINT. AND MISC. MACHINE PARTS STORAGE ROOM TO INCLUDE (3) RACKS, BELT CONVEYOR MATERIAL, HAND HELD FIRE EXTINGUISHERS, WIRE BASKET WITH MISC. SCRAP (LOC. OUT SIDE STORAGE)

3574 1 (18) COIL RACKS (LOC. STEEL RECEIVING)

3575 1 (15) COIL RACKS (LOC. STEEL RECEIVING)

3576 1 (3) THREE STEP, FOUR WHEEL SAFETY LADDERS (LOC. GLA)

3577 1 4'x 8' STEEL FIXTURE SETUP TABLE (LOC. R & D ROOM)



3580 1 PALLET OF SETUP FIXTURES (LOC. R & D ROOM)

3581 1 (9) TRIPOD MATERIAL STANDS (LOC. R & D ROOM)

3582 1 (13) TRIPOD MATERIAL STANDS (LOC. R & D ROOM)

3583 1 (5) TRIPOD MATERIAL STANDS TO INCLUDE WIRE BASKET, (LOC. R & D ROOM)

3584 1 CONTENTS OF ROOM TO INCLUDE (3) STEEL TABLES, (5) CABINETS AND CONTENT OF ALUMINUM, METAL AND MISC., (LOC. R & D ROOM)

3585 1 CONTENTS OF ROOM, EXCLUDING LOTTED ITEMS TO INCLUDE MISC. SHELVING, CABINETS, BRACKETS, CHAIRS, FURNITURE AND RACKING, (LOC. R & D ROOM)

3586 1 (80) SECTIONS PALLET RACKING WITH CONTENT OF MUFFLERS 10'X 18'' UPRIGHTS, 8' CROSS BEEMS, (LOC. R & D ROOM MEZZININE)

3587 1 ZEBRA Mdl: 170XI LABEL PRINTER (LOC. WAREHOUSE OFFICE)

3588 1 ZEBRA Mdl: 140XI III PLUS LABEL PRINTER (LOC. WAREHOUSE OFFICE)

3589 1 ZEBRA Mdl: 140XI III PLUS LABEL PRINTER (LOC. WAREHOUSE OFFICE)

3590 1 ZEBRA Mdl: 140XI III LABEL PRINTER (LOC. WAREHOUSE OFFICE)



Printed:03/16/2014 13:39



www.biditup.com





3594 1 ZEBRA Mdl: Z6M PLUS LABEL PRINTER (LOC. WAREHOUSE OFFICE)

3595 1 IBM Mdl: 6400 LINE MATRIX PRINTER (LOC. WAREHOUSE OFFICE)

3596 1 IBM Mdl: 6400 LINE MATRIX PRINTER (LOC. WAREHOUSE OFFICE)

3597 1 CONTENTS OF WAREHOUSE OFFICE EXCLUDING LOTTED ITEMS TO INCLUDE ASSORTED METAL SHELVING, DESKS, OFFICE PARTITIONS AND WOOD DESKS (LOC. WAREHOUSE OFFICE)

3598 1 ASSORTED LOCKER FROM MANUFACTURING AREA (LOC. WAREHOUSE)

3599 1 LARGE LOT OF VACUUMS, FOLDING CHAIRS, CASTER CHAIRS, MOP BUCKETS, BROOMS, TRASH BARRELS (LOC. WAREHOUSE)

3600 1 IBM Mdl: AS400 COMPUTER SYSTEM WITH (2) SERVER TOWERS (LOC. FRONT OFFICE)

3601 1 MISC. SERVER SYSTEM TO INCLUDE 14 ASSORTED COMPUTERS, WITH APC PRO 1500 BACKUP SYSTEMS, (LOC. FRONT OFFICE)

3602 1 (30) ASSORTED COMPUTERS TO INCLUDE KEY BOARDS, DOCKS, CABLES AND MISC.,(LOC. FRONT OFFICE)

3603 1 (15) ASSORTED COMPUTER MONITORS (LOC. FRONT OFFICE)

3604 1 (11) ASSORTED COMPUTER MONITORS TO INCLUDE ASSORTED KEYBOARDS AND MISC.,(LOC. FRONT OFFICE)

3605 1 SHORETEL Mdl: 230 (48) PHONES (LOC. FRONT OFFICE)

3606 1 SHORETEL Mdl: 230 (36) PHONES (LOC. FRONT OFFICE)

3607 1 OFFICE TO INCLUDE DESK, CABINETS, ROUND TABLE WITH CHAIRS, (LOC. FRONT OFFICE)

3608 1 OFFICE AREA TO INCLUDE (3) DESKS, (9) CABINETS AND (3) CHAIRS, (LOC. FRONT OFFICE)

3609 1 (10) OFFICE CUBICALS TO INCLUDE DESKS, CABINETS, AND MISC., (LOC. FRONT OFFICE)



3612 1 (3) OFFICES TO INCLUDE (3)DESKS, (5)CABINETS, (10) CHAIRS AND MISC., (LOC. FRONT OFFICE)

3613 1 (17) ASSORTED CABINETS 3614 1 CONTENT OF FIRST AID ROOM TO

INCLUDE BED, SCALE, CABINET WITH CONTENT AND MISC., (LOC. FRONT OFFICE)

��

BIDITUP AUCTIONS & APPRAISALS Page 1 11426 … · 11426 ventura blvd., second floor studio city,ca...

Documents

Transcript of BIDITUP AUCTIONS & APPRAISALS Page 1 11426 … · 11426 ventura blvd., second floor studio city,ca...