BETEX MAINTENANCE PRODUCTS - Canstar Instruments
Transcript of BETEX MAINTENANCE PRODUCTS - Canstar Instruments
ANNO 1978
Dear reader,
We are proud to present our catalogue of BETEX Maintenance Products.
Here you will find our BETEX® Special Tools programme for maintenance (MRO) and production (OEM):
• Condition Monitoring: measuring equipment for bearings, temperatures, noise and vibrations etc • Dismounting: mechanical and hydraulic pullers, self-centering pullers up to 100 t capacity, work shop
equipment, auxiliary tools • Hydraulic equipment: BETEX Hydraulic Power • Mounting & Alignment: induction heaters, fitting tool sets, shims, alignment computers
About Bega Special ToolsWe have been developing and manufacturing 'Special Tools' since 1978 and we provide solutions for damage-free mounting and dismounting of bearings and drive components. Our expertise and experienceensure quality, reliability, professional advice and outstanding service. BETEX® is a registered trademark of Bega Special Tools and stands for quality and reliability.
Please also order our catalog for:• BETEX® Induction heaters for maintenance (MRO) and production (OEM).
For mounting and dismounting.
Please do not hesitate to contact our Sales department or one of our dealers. We will be pleased to help you.
Your Bega Team.
MOUNTIN
G CHECKING
DISMOUNTI
NG
Professional Solutions With Proven Quality & Performance!
03
©Bega International bv 2013/04. Technical modifications reserved. Bega is not responsible for damage occurring as a direct or indirect result of the use of the information from this publication.
TÜV Rheinland Group
BETEX®
06
10
34
72
04
Condition MonitoringCondition monitoring instruments
DismountingMechanical and hydraulic pullers up to 100t
Hydraulic equipmentCylinders, pumps, jacks
Mounting and alignment Induction heaters, fitting tool sets,Shims, alignment computers
MAINTENANCE PRODUCTS
INDEXConditioning Monitoring
Bearing Checker .......................................... 06VibChecker .................................................. 071220, 1230, 1250, 1300 thermometers ....... 081510 DB meter, 1620 tachometer,ELS 12 stethoscoop .................................... 09
Hydraulic pullersHP hydraulic pullers ..................................... 10HSP hydraulic pullers .................................. 11HXP hydraulic pullers .................................. 12HXPC 50 mobile hydraulic pullers ............... 13Tri-Section hydraulic pullers ........................ 14HPP Push Puller .......................................... 15
Accessory setsBearing Splitters .......................................... 16Tri-Section Plates ........................................ 17
Mobile hydraulic pullersMobipuller 25 & 50 ton ................................. 18 HXPM 50 ..................................................... 20HXPM 100 ................................................... 22BPP Puller Pusher 100 ton ......................... 24
Mechanical pullersMSP mechanical puller ................................ 26KZZ key-drawer ........................................... 2746, 47, 48/49 ................................................ 2852, 54 ........................................................... 2956, 44, 625/630 ............................................ 3062 ................................................................. 3163, 64/tracta ................................................. 32Collets for 63, 64 /tracta .............................. 33
HydraulicsExplanation cylinders .................................. 34SSS cylinders .............................................. 35SLS cylinders ............................................... 36SCS cylinders .............................................. 37SHS cylinders .............................................. 38JLLC cylinders ............................................. 39JLPC cylinders ............................................. 40SSA cylinders .............................................. 41ALNC cylinders ............................................ 42ACHC cylinders ........................................... 43DAC cylinders .............................................. 44ADAC cylinders ............................................ 45PB/HC heavy duty hand pumps .................. 46AHP heavy duty aluminium hand pumps .... 47
HP35 hand pumps ....................................... 48HP80 hand pumps 8L .................................. 49HP160 hand pumps 16L ............................. 50FHB foot pumps .......................................... 51AP 921 air pumps ....................................... 52AP1600, 3000 air pumps ............................ 53AP 8000 air pumps ..................................... 54EP 18 elektric hydraulicpumps .................... 55EP 211 elektric hydraulicpumps .................. 56AHP/UHP high pressure alu. hand pumps .. 57UHAP 2800 high pressure air pumps .......... 58Accessories: hoses, etc ............................... 59Accessories: connectors, gauges, couplers 60CJ jacks ....................................................... 63TOE jacks .................................................... 64PPK portable power kits .............................. 65TLS hydraulic spreaders/lifters .................... 66Nutsplitter .................................................... 67WSP workshop presses .............................. 68Mobilift workbench ...................................... 69Safety tips .................................................... 70
Fitting tool sets .............................................. 72
Induction heaters .......................................... 74
Shims .............................................................. 76
Alignment computersFixturelaser Dirigo ....................................... 78Shaft alignment system E420, E530 ........... 79 Pully alignment laser D90, D130, D160 ...... 80PAT .............................................................. 81
05
BETEX® MAINTENANCE PRODUCTS
06
An economic three- in-one-instrument for condition monitoring. Bearing Checker is unique, being the first portable,pocketsize instrument (weight 185 g, size 158 x 62x 30 mm) for evaluated shock pulse measurement. Besides shock pulses, Bearing Checker measuresmachine surface temperature with infrared light, andcan also be used as an electronic stethoscope forlistening to machine sounds.
The instrument can be used on most rotating machinery, in a diversity of industrial environments,such as:• electric motors• fans• pumps
Bearing Checker - your affordable expertMachine breakdowns are frequently caused by bearing damage. Unplanned downtime, as well asunnecessary repair work, can be significantly reduced by periodically checking bearing condition.
The Bearing Checker is inclusive:• Infra-red thermometer• Electronic Stethoscope• Manual, quick-start instruction• DVD with technical documentations• Batteries
BETEX®
BETEX BEARING CHECKER
Advantages:• proactive approach to maintenance• useful and economical complement to your
maintenance toolbox• no specialized training• potential problem sources can be detected well
before damage is detectable by heat or vibration.
CHECKING (MONITORING)
07
VibChecker – portable and user friendly vibration measurementVibChecker is a light and compact-sized instrumentfor vibration measurement in the 10-1000 Hz frequency range. Measurement results are immediately and automatically evaluated against ISO standards. Green - yellow - red LEDs indicatevibration severity and a real time FFT spectrum isproduced for easy pattern recognition. Results canbe stored for documentation and follow-up.With its built-in probe, easy button operation andclear symbols, VibChecker is an all set to go instrument; just point the probe and measure to locate vibration-related problems.
Vibration monitoring is a cost-effective predicitive maintenance tool. In most cases, vibration measurement can detect aproblem long before damage to the machine isdone. The repair of equipment failing while in service is many times costlier than planned repairsmade possible through vibration monitoring.
Minding your machineryMachine vibration is the cause of many problems inindustrial equipment. Integrated in your normalmaintenance activities, periodic vibration measurement with VibChecker will go a long way tohelp keep your equipment operational. VibCheckercombines handiness and ease of use with cost effectiveness and durability. Suited to both new andexperienced users, VibChecker covers the basic vibration monitoring needs of your maintenance organization.
BETEX®
CHECKING (MONITORING)BETEX VIBCHECKER vibration monitoring
08
The thermometers all have:• Backlit display• Precision 0.1°C• Automatic "hold" function• Readable temperature of 0.1°C• Measurement in Celsius or Fahrenheit
BETEX 1220 - LASER TEMPERATURE TO 300°C• Measurement range: -50°C - 300°C• Fast response time (within 0.9 sec.)• Dimensions: 155x50x72 mm• Power supply: 2 AAA batteries (included)• Weight: 68 gr.
BETEX 1230 - LASER TEMPERATURE TO 380°C• Measurement range: -50°C - 380°C• Max. height: 1500mm• Fast response time (within 0.5 sec.)• Dimensions: 185x135x38 mm• Power supply: one 9V battery (included) and carrying case with strap• Weight: 178 gr.
BETEX 1250 - LASER TEMPERATURE TO 1000°C• Measurement range: -50°C - 1000°C• Max. height: 1500mm• Fast response time (within 0.5 sec.)• Dimensions: 170x50x90 mm• Power supply: one 9V battery (included) and carrying case with strap• Weight: 178 gr.
BETEX 1300 - LASER TEMPERATURE TO 1370°C• Measuring range: -100°C - 1370°C• Also suitable for surface measurement• Dimensions: 120x68x31 mm• Power supply: 9V battery, linen bag and manual• Weight: 112 gr.
CHECKING (MONITORING)LASER THERMOMETEROur digital laser thermometers are ideal for fast and safe measurement of liquids, gases, and many other substances,also suitable for temperature measurements of motors, brake systems, heating systems, etc. The built-in laser pointercan determine the correct measuring point distance, measured value can then be within half a second read and recorded automatically.
BETEX®
09
CHECKING (MONITORING)DECIBEL METER / TACHOMETER / STETHOSCOPE
BETEX®
BETEX 1510 - DECIBEL METER - SOUND METERWith this professional microprocessor controlled sound level meter you can accurately measure the volume. The meteris carried out in a robust ABS housing and is designed such that it is to handle comfortably.
The instrument features an extra large display with digit height 20 mm. The meter also has a hold function to hold themeasurement data on the display and has the capability to carry out measurement interval, wherein the time betweeneach measurement can be set up. In these measurements, the time, and sensitivity to be selected independently. Also, it is possible to store the highest value automatically
• Measuring range: 40-130 dB (A)• Frequency: 31.5 Hz - 8500 Hz• Resolution: 0.1 dB• Power: 1x 9V battery. (incl.)• AC adapter connector• Dimensions: 260x69x32mm• Weight: 350 gr
Includes:• Microprocessor controlled sound meters• Windcap for microphone• PE storage case and instruction guide
BETEX 1620 – DIGITAL LASER TACHOMETERThis digital laser tachometer is very suitable for maintenance and servicing of engines, rotating equipment and machines.
• 5-digit 10mm LCD display.• Test Range of measurement: 5 to 99,999 rpm.• Display: 0.1 r.p.m.. at 0.5 to 999.99 r.p.m.• Display: 1.0 r.p.m. above 1000 r.p.m.• Accuracy + / - 0.5%• Measuring distance 50 to 300 mm.• Memory: last, maximum and minimum measured value.• Operates on 1 x 9 volt battery.• Dimensions: 72x190x37 mm.• Weight: 250 grams.
Includes:• 3 Reflective tape strips.• Carrying case and instruction manual
BETEX ELS12 ELECTRONIC STETHOSCOPEFor preventive maintenance on installations and rotating equipment. A simple method to detect machine failure in anoisy environment. The need to eavesdrop on mechanical sounds within machinery is essential in any maintenance department. Mechanical faults can often be heard. The problem is to locate the sound source quickly and accurately ina generally noisy environment.The electronic stethoscope is a sensitive listening stick, for location of all kinds of machinery noise. Valve chatter, tappetnoise, piston slap, gear and pump noise and the operation of relays and solenoidsare just a few of the many noises that may be traced, amplified and assessed with this device. ELS-12 can also be connected to a tape recorder.
• Temperature range: 0°C to +55°C• Strong housing in black ABS moulding.• Lightweight, with 290 mm measuring probe tip, only 300 grams.• Alkaline 9V battery provides a long operating time, approx
30 hours in normal use.• Includes: headphones and bag• Measuring rod: 60 mm and 290 mm• Dimensions: 205x50x40 mm
10
BETEX®
HYDRAULIC PULLERSBETEX HP 2/3-arm pullers, with integrated pump and cylinder
• Multifunctional:These HP-pullers are ideal for pulling a wide variety ofparts, including bearings, bushings, wheels, gears andpulleys. Applications for HP-pullers will be found inmotor repair shops, service companies, maintenanceshops, industry, mining, paper mills, chemical plants,shipping, offshore, etc.
• Compact:The self contained hydraulic pump and cylinder savespace, as you don’t need a separate pump, hose orpuller.
• Strong:The harder the force, the tighter the jaws grip.The arms cannot bend or deflect.
• Economical:2/3-arm combination puller, 2 pullers for the price ofone, including integrated pump and cylinder!
• Safe:The improved integral safety release valve preventsoverloading and ensures that you will never exceed themaximum power capacity.
• Versatile:Various accessories are available. Sets are supplied inpractical PE case and consist of a puller block,connecting rods and a set of bearing splitters.
4, 6, 8, 12, 20 and 30 ton capacity!
Type Art.no. Cap.ton
Max. shaftlength mm
Max. spread mm
Strokemm
WeightKg
HP 43 *HP 63 *HP 83 *HP 123 *HP 203**HP 303 **
791000792000793000794000796000797000
468122030
185215230270360360
275300350375520550
60858585111111
111111142020
4.56.56.58.022.032.0
* Incl. safety net ** incl. safety blanket
BETEX HP 2/3 Hydraulic pullers
Amm
61010102727
Bmm
222525293338
Cmm
325151516060
Dmm
84122122118161155
Emm
424550608068
Fmm
222525284050
Gmm
Compact, ergonomic design, easily operatedby one person!
11
BETEX®
HYDRAULIC PULLERSBETEX HSP 2/3-arm pullers, self-centering, with integrated pump and cylinder
• Practical!Self-centering, easy to convert, 2-arm or 3-arm puller.The arms slide inwards or outwards simultaneously.
• Compact!The self contained hydraulic pump and cylinder savespace, as you don’t need a separate pump, hose or puller.
• Strong!The harder the force, the tighter the jaws grip. Thearms cannot bend or deflect.
• Economical!2/3-arm combination puller, 2 pullers for the price ofone, including integrated pump and cylinder!
• Safe!The integral safety release valve prevents overloadingand ensures that you will never exceed the maximumpower capacity.
• Versatile!Various accessories are available. Sets are supplied inpractical PE case and consist of a puller block,connecting rods and a set of bearing splitters.
Advantages of self-centering pullers:• Prevents damage to shaft and workpiece being pulled. • Efficient and saves time. • Can be used in any position.• Adapters included.
4, 6, 8, 12, 20 and 30 ton capacity!
Compact, ergonomic design, easily operatedby one person!
Type Art.no. Cap.ton
Max. shaftlength mm
Max. spread mm
Strokemm
WeightKg
HSP 43* HSP 63* HSP 83* HSP 123*HSP 203**HSP 303**
791500792500793500794500796500797500
468122030
190230280305365465
325380450485570680
60708585111111
131313152020
8.010.012.015.025.036.0
BETEX HSP 2/3 Hydraulic self-centering pullers
Amm
101013
16,52727
Bmm
2222
27,5293338
Cmm
------
Dmm
405070706285
Emm
424550608098
Fmm
222325284050
Gmm
* Incl. safety net ** incl. safety blanket
12
BETEX®
HYDRAULIC PULLERSBETEX HXP 2/3-arm pullers, self-centering
Safe and easy dismounting of bearings, couplings, rings etc.
Type
HXP 83*HXP 123*HXP 203**HXP 303**HXP 503**
Art.no.
793600794600796600797600799600
Cap. ton
812203050
Max. shaftlength mm
280305365465455
Max. spread mm
450485570680860
StrokemmH E
Pump tip mm
F G A
Jaw tip mm
B C8585111111330
4250608098
2225284050
4070706285
1313152020
1013
16.52727
2227.5293338
WeightKg
9.011.724.0.34.0140.0
BETEX HXP 2/3 Hydraulic self-centering pullers
Separate 2-stage handpump available• Practical!
Self-centering, easy to convert, 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
• Save!Arms can never deflect!
• Economical!2/3-arm combination puller, 2 pullers for the price of one.
• Strong!The greater the pulling force, the tighter the jaws grip!The arms cannot bend or deflect.
Advantages of self-centering pullers:• Prevent damage to shaft and workpiece being pulled.• Work efficient and save time. • Accessory sets are available for the 8 and 12 ton pullers. • Supplied in handy carrying case.
8, 12, 20, 30 and 50 ton capacity!
* Incl. safety net ** incl. safety blanket
13
BETEX®
MOBILE HYDRAULIC PULLERBETEX HXPC 50 - 2/3 arm puller, self-centering, with crane, 50 ton capacity
Type/art. no HXPC 50/700016 *
Capacity in tons 50Max. stroke in mm 159 Max. spread in mm 860 Min. spread in mm 140 Max. shaft length in mm 455 Operating main cylinder electro-hydraulic pump, 230V-16A
50Hz, with remote controlOperating height adjustment electro-hydraulic pump, 230V-16A
50Hz, with remote controlOperating self-centering arms manualAdapters 2 items in mm 1x Ø 40, 1x Ø 50: length 155 Min. height (from the centre) mm 210Max. height (from the centre) mm 1550Manometer 700 barWeight 300 Kg
For dismounting of all kinds of transmissionparts such as bearings, couplings, gears,wheels etc.
• PracticalThe puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
• Fast The complete stroke is 159 mm. Two adapters (extensions)are included for a total length of 310 mm.
• StrongThe harder the force, the tighter the jaws grip. The armscannot bend or deflect.
• SafeThe integral safety release valve prevents overloading andensures that you will never exceed the maximum power capacity.
Advantages • Prevents damage to shaft and object being pulled• One person can do the job * The puller is also available without crane: HXP503
50TONS
• Efficient and saves time• Can be used in any position, horizontal or vertical• Including 2 adapters• Including remote control • Including safety blanket
14
BETEX®
Type
Tri-section set 4tTri-section set 6tTri-section set 8tTri-section set 12t
Art.No.
792160792210792340792495
Cap. Tonnen
46812
Max. shaft length
mm211243243284
Min. spread
mm30505090
Max. spread
mm160210270340
WeightKg
20303468
BETEX Tri-section hydraulic pullers
BETEX TRI-SECTION PULLERS
HYDRAULIC PULLERS
Tri-section pullers• The plates grip behind the inner and outer rings of the bearing,
preventing the pulling force from being transmitted through themoving parts, minimizing the risk of bearing damage.
• The Tri-section Plate's unique design ensures the applicationof force at the most efficient point - the inner ring and outerring together - and thereby requires less force for removal thanrequired if only pulling on the outer ring.
• The firm grip behind a bearing's inner and outer rings ensuresthat the pulling forces are not transmitted through the movingparts, preventing damage to the bearing.
• Most parts are forged SCM440 alloy steel, creating a very safeand durable product.
The puller sets come complete with:• Integrated pump and cylinder • Handle 360° adjustable • Tri-section Plate • Puller block • Connection rods • Steel storage case
4, 6, 8 und 12 tons capacities
15
BETEX®
Type Operations Outputtons
Amm
Bmm
Cmm
Dmm
E Fmm
WeightKg
HPP123Pushing
Outer pullingInner pulling
8128
44-28085-300110-210
270260
130-150
140140
-
2828-
M12-P1.75-
1"-12UNF
30--
19,5
BETEX Push Puller / three-in-one
Push Puller: three-in-one toolThis unique patented design provides end users with athree-in-one tool to easily and safely fit or remove bearingsand sleeves using either their outer or inner edges.The push puller is specially designed for combined pushingand pulling. This creates one tool that uses even force toenable very easy pushing and pulling.The pushing jaw fits on the bearing’s inner ring, preventingthe transmission of forces and/or heat through the outerring to the moving parts, minimizing the risk of bearing damage.
User-Friendly• Unique, patented double-acting pump body to provide
pushing and pulling force.• Unique jaw design for mounting and outer ring pulling
without removing and changing.• Three-jaw structure always provides an even and
constant force, whether mounting, outer ring pullingor inner ring pulling.
• Depends on user requirements - the extension barscan be used where necessary for extra reach.
• Self-centering design of the inner puller always provi-des an even force and prevents jaws sliding off duringoperation.
Safe• The built-in safety valve ensures user safety and
prevents damage to tool and job.• The built-in safety valve prevents the user from being
harmed and the job from being damaged as ratedpressure cannot be reset or adjusted.
• Most parts are forged of SCM440 alloy steel, creatinga very safe and durable product.
Cost-reducing• Built-in safety valve ensures the tool is always operated
as per the rated pressure, significantly extending toollife.
• Three-in-one design reduces preparation, tool-resettime and duration of operation.
• This push puller is ideal for fitting and removing a widevariety of press-fit parts, including bushings, wheels,bearings, gears and pulleys.
Inne
r pul
ling
Out
er p
ullin
gPu
shin
g
HYDRAULIC PULLERSBETEX HPP, selfcentering 3-in-1 PUSH PULLER
16
BETEX®
ACCESSORY SETS
Acc. Set HP 43,Acc. Set HP 63, Acc. Set HP 83,Acc. Set HP 123,
791100792100793100794100
46812
250280280325
8.512.512.518.0
Ø 15-110Ø 25-150Ø 40-150Ø 45-225
HSP 43HSP 63,HSP 83,HSP 123,
HXP 83HXP 123, HPP 123
Type Cap. tonArt.no. Min/max Spreadmm
Shaft lengthmm
Weight kg
BETEX BEARING SPLITTERSThis accessory set consists of:1 puller block 2 connecting rods (legs)1 set of bearing splitters for a min./max Ø 15-225 mm
You can use the cylinder from the HP/HSP/HXP series.
ACCESSORY SETS FOR 4, 6, 8, 12 TON PULLERS HP, HSP, HXP, HPP
BETEX®
ACCESSORY-SETSBETEX TRI-SECTION PLATES
Use in combination withTri-section 160: HP/HSP 43, 63Tri-section 210: HP/HSP 63, 83Tri-section 340: HP/HSP/HXP 83, 123, 203, HPP 123Tri-section 495: HP/HSP/HXP 203, 303
Tri-section plateThe tri-section plates are specially designed to be used inconjunction with the three-armed pullers. The unique andpatented swivel design creates maximum spread and applies even force at the most efficient point. The platesgrip behind the inner and outer rings of the bearing, preventing the pulling force from being transmitted throughthe moving parts, minimizing the risk of bearing damage.
User-friendly• Unique, patented swivel design creates maximum
spread.• The tri-section construction provides even-force
distribution, preventing bearings from locking and/ortilting on the shaft during removal.
• Suitable for use in conjunction with all three-armedhydraulic pullers.
• Available in a wide range, covering the most commonshaft sizes.
The Tri-section plate series consist of 4 different sizes oftri-section plates that are suitable for shafts of max. Ø ranging from 26 to 495 mm (2" to 19.5").
Typ Art.no. Cap. tonA1 mm A2 mm
SpreadB (mm max)
Cmm
Available shaft diam Dmm
E Fmm
Weight kg
Tri-section 160Tri-section 210Tri-section 340Tri-section 495
265090140
160210340495
216280460660
105115170240
240285430600
5/8”-11UNC-16UNF-14UNF
1”-14UNF
8314561
3.55.516.541
3/4"7/8"
17
791160791210791340791495
682030
19
BETEX MOBIPULLER
Meaning of codes:
25-50 tractive force in tons
430 max. diameter in mm
H manual hydraulic
E electrical hydraulic
V mobile
A remote control
S max. stroke in mm
D double acting
THE BETEX MOBIPULLER is a heavy duty, mobile hydraulic puller.It is used for dismantling bearings, couplings, gears and otherparts, with relative speed and ease. The Mobipuller excels throughfunctional and ergonomic operation. It is stable, mobile and adjustable in height.A maximum tractive force of either 25 or 50 tons can be appliedwith diameters of up to 430 mm.To ensure safe and easy operationthe electrical models are equipped with remote control, safety cageand pressure gauge.
A1: In standard position mm:A2: In extended position mm:B1: Frame length in standard pos. mm:B2: Frame length in extended pos. mm:
Position high / low mm:Dimensions L x W mm:
C: Diameter of jaws mm:D: Set-up height mm:
Adapters mm (155 mm):Weight kg:
Auxiliary tools for dismantling ofinner rings and delicate components.
Remote control
All models areequipped with asafety cage for personal safety
Type
25 HV 430 S 260
25 EVA 430 S 260
50 HV 430 S 260
50 EVA 430 S 260
50 EVA 430 S 340
50 EVAD 430 S 340
50 EVAD 430 S 460
Art.no.
700001
700002
700003
700004
700005
700006
700007
Cap. Ton
25
25
50
50
50
50
50
Stroke cylinder
260
260
260
260
340
340
460
Pump hydraulic manual/electric
manual
single acting electric
manual
single acting electric
single acting electric
double acting electric
double acting electric
In standard position mm
750
750
770
770
690
640
490
In extended position mm
1130
1130
1150
1150
1070
1020
870
7501130121015901100/16501470x1040430900/1430Ø 40,50460
BETEX®
All models are standard equipped witha with oil filled pressure gauge against overload• 4 shaft protectors with an ID of 40 and 50 mm• 4 stable wheels with polyurethane equipped tires, 2 swiveling wheels with double functioning brake• Safety cage• CE-Mark
MOBILE HYDRAULIC PULLER
20
BETEX®
MOBILE HYDRAULIC PULLER BETEX HXPM 50 - 2/3 arm puller, self-centering50 ton capacity
For dismounting of all kinds of transmissionparts such as bearings, couplings, gears,wheels etc.
• PracticalThe puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
• Fast The complete stroke is 330 mm. Four adapters (exten-sions) are included with a maximum length of 620 mm.
• StrongThe harder the force, the tighter the jaws grip. The arms cannot bend or deflect.
• SafeThe integral safety release valve prevents overloadingand ensures that you will never exceed the maximumpower capacity.
Advantages • Prevents damage to shaft and object
being pulled• One person can do the job• Efficient and saves time• Including 4 adapters• Including remote control • Including safety blanket
Detail electric-hydraulic pump
50TONS
21
BETEX®
MOBILE HYDRAULIC PULLER BETEX HXPM 50 - 2/3 arm puller, self-centering50 ton capacity
1. Height adjustment: footpump2. Double-acting handpump for holding, opening and
closing the jaws for safe, secure grip on job3. Electro-hydraulic pump, 230V - 700 bar, operates the
cylinder. This is a 4-stage pump with oil delivery 4.2 liters/minute at 0 bar pressure.
4. Self-centering; The arms slide inwards or outwards simultaneously.
5. The design prevents the puller jaws from slipping ordeflecting
6. Puller can easily be converted from 3- to 2-arm configuration
7. The puller is adjustable 5° vertically8. The cart has two swivel castors (self-locking) and has
two rigid castors9. The hydraulic cylinder is a 2-stage spring-return type
with a max. working pressure of 700 bar (50 ton)10. Four adapters (extensions) with a total length of
620 mm are included
Type / art. no.Capacity in tons
Max. stroke in mm
Max. spread in mm
Min. spread in mm
Max. shaft length in mm
Operating main cylinder
Operating height adjustment
Operating self-centering jaws
Adapters 4 items in mm
Min. height (from the centre) in mm
Max. height (from the centre) in mm
Gauge
Weight in kg
HXPM 50 t / long / 700014 HXPM 50 t / short / 70001750 50
330 330
1250 950
75 75
720 500
electro-hydraulic pump, 230V - 16A, with remote control
foot pump
hand pump, double acting
2 x Ø 40, 2x Ø 50: length 155
820 820
1370 1370
700 bar 700 bar
372 342
22
BETEX®
MOBILE HYDRAULIC PULLER BETEX HXPM 100 - 2/3 arm puller, self-centering100 ton capacity
Adjustable jaw tips forextra grip
For dismounting of all kinds of transmissionparts such as bearings, couplings, gears,wheels etc.
• PracticalThe puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
• Fast The complete stroke is 270 mm. Four adapters (exten-sions) with a total length of 900 mm are included.
• StrongThe harder the force, the tighter the jaws grip. The arms cannot bend or deflect.
• SafeThe integral safety release valve prevents overloadingand ensures that you will never exceed the maximumpower capacity.
Advantages • Prevents damage to shaft and object being pulled• One person can do the job• Efficient and saves time• Including 4 adapters• Including remote control
100TONS
Detail pneumatic pump
23
BETEX®
MOBILE HYDRAULIC PULLER BETEX HXPM 100 - 2/3 arm puller, self-centering100 ton capacity
1. Pneumatic height adjustment2. Double-acting pump for holding, opening and closing
the jaws for safe, secure grip on job3. Electro-hydraulic pump, 400V - 700 bar, operates the
cylinder. This is a 4-stage pump with oil delivery 10 liters/minute at 0 bar pressure.
4. Self-centering; The arms slide inwards or outwards simultaneously.
5. The design prevents the puller jaws from slipping ordeflecting
6. Puller can easily be converted from 3- to 2-arm configuration
7. The puller is adjustable 5° vertically8. The cart has two swivel castors (self-locking) and has
two rigid castors9. The hydraulic cylinder is a 2-stage spring-return type
with a max. working pressure of 700 bar (100 ton)10. Four adapters (extensions) with a total length of
900 mm are included11. Adjustable jaw tips for optimal/adjustable grip
TIP: use in combination with UHAP2800 highpressure pump.
Type / art. no.Capacity in tons
Max. stroke in mm
Max. spread in mm
Min. spread in mm
Max. shaft length in mm
Operating main cylinder
Operating height adjustment
Operating self-centering jaws
Four adapters (in mm)
Min. height (from the centre) in mm
Max. height (from the centre) in mm
Gauge
Weight in kg
HXPM 100 t / 700015100
270
1500
200
1215
electro-hydraulic pump, 400V - 16A, with remote control
pneumatic/hydraulic pump
pneumatic/hydraulic pump
2 x Ø 70: length 150, 2x Ø 70: length 300
830
1320
700 bar
1120
24
BETEX®
MOBILE HYDRAULIC PULLER-INSTALLER BETEX BPP BEARING PULLER PUSHER, MAX 100 T CAP.
INSTALLATION AND REMOVAL OF RAILWAY BEARINGS
Specially for railway and metro workshops. Use the right equipment to remove or install tapered roller bearings. This hydraulic aid will allow you to save valuable time and work safe & efficient.Easy to use roll-around model for both mounting and dismounting.
• Mobile and easy to use by one person • Pulling capacity (dismantling) adjustable to 100 t max.• Pushing capacity (mounting) adjustable to 68t max.• Suitable for locomotives, passenger and freight cars• For safe, simple and fast mounting and dismounting of TBU, SP and
TAROL bearing sets • Wide range of accessories available
The accessory set is available in all sizes, metric and inch versions (housing-type locomotives and passenger cars).
An accessory set consists of:• Pulling shoe• Pulling shoe insert adapter• Guide tube & cap screw assembly• Guide tube adapter• Installing tube adapter ring
Quotation for adapter or different adapter sizes are on request!
25
BETEX®
MOBILE HYDRAULIC PULLER/INSTALLER BETEX BPP BEARING PULLER PUSHER, MAX 100 T CAP.
To order the correct accessory set to service bearings (housing-type locomotives and passenger cars), please provide us with the following information:• Bearing number and manufacturer number• Drawing of bearing and shaft (ask for the questionnaire)• Railroad name and location
Step by step dismounting of TBU / SP / TAROL bearing sets
Step by step mounting of TBU / SP / TAROL bearing sets
See our video at our website www.bega.nl
26
BETEX®
MECHANICAL PULLERS BETEX MSP 2/3-arm pullers, self-centering
Ergonomic design, easily operated by one person!
• Practical!Self centering 2 or 3-arm puller with self-lockingsystem.Easy to convert and easy to use in every position.
• Safe!The arms adjust themselves simultaneously, eitherinwards or outwards. Self-locking system guaranteesarms neither bend nor deflect.
• Economical!2- or 3-arm combination puller. Two pullers for the priceof one.
• Strong!The harder the force, the tighter the jaws grip. Thearms cannot bend or deflect.
Advantages of self-centering pullers:• Prevent damage to shaft and workpiece being pulled. • Work efficient and save time.
2, 3, 5, 8 and 10 ton capacity!
Safe and easy dismounting of bearings, couplings, rings etc.
Type
MSP 2/3-120MSP 2/3-180MSP 2/3-270MSP 2/3-300MSP 2/3-380
798250798300798350798400798450
235810
80120160210250
120180270300380
86111314
67101410
1515252729
1.62.34.36.19.6
Art.no. Cap. ton Max. shaftlength mm
Max. spread mm
Amm
Bmm
Cmm
WeightKg
BETEX MSP 2/3 Mechanical self-centering pullers
27
BETEX®
KEY-DRAWER
For professional removal of keys.The Betex KZZ Key-drawer (Item No. 4900011) is used for the safe removal of keys from the shafts of any type of machine, motor, blower, compressor, etc. For keys from 5 mm to 35 mm in width.
Safe!You no longer need a hammer and chisel.
Advantages• Safe and fast removal. • Perpendicular removal.• No damage to shafts or keys.• Shafts remain straight.• Saves time, labour and costs.• Jaws are made from specially tempered steel.• Screw has left and right trapezium thread.
Easy to use1. Turn wheel (A) to move the jaws (1) up or down
so that they are aligned with housing (2). 2. Turn wheel (B) to fit the size of the key allowing
± 1 mm space.3. Turn wheel (B) hand tight to secure the key with
the jaws. 4. Then turn wheel (A) to extract the key
perpendicularly. 5. Turn wheel (A) to move the jaws down; turn
wheel (B) to open the jaws and free the key.
B 1 1 2 A
Typ
KZZ
Art.no.
4900011
Min. Spread
mm
Max. Spread
mm
WeightKg
5 35 2,2
BETEX KZZ
MECHANICAL PULLERS
28
BETEX®
BETEX 46Simple, handy 2-arm puller for parts gripped externally like pulleys,bearings, rings, etc. Suitable for removing fans from electric motorsDuring operation the arms can not slip because they are pressed against the cross bar.The higher the necessary pulling force, the stronger the arms are pressed against thecross bar. The one-hand operation of the puller permits easy use even under unfavourable conditions. A spring inside the housing guarantees a continual clamping of the forged alloy steel arms.
BETEX 47Patented special 2-arm bearing pullersThis bearing puller is particularly suitable for extracting bearings, bearingrings etc. that fitflushly with other parts. This system is generally applied when dismantling bearings fromanchors, pump shafts etc.
BETEX 48/492/2 bearing splitters and pullersBetex no. 48/49 is designed for dismantling flush-fitting bearings andother parts where an ordinary puller would be unable to get a proper grip. Suitable for various applications.
Type
47-10047-20047-300
Max. diam.mm
4590150
Max. shaftlength mm
65100150
BETEX 47 is available in 3 types
Type
46-20046-00046-01046-020
Max. diam.mm
6075110220
Max. shaftlength mm
4060100200
BETEX 46 is available in 4 types
Type
48-06048-07548-11548-15048-210
Max. diam.mm
6075115150210
Countersupport
standard with extension49-10049-10049-20049-30049-400
Max. shaft length mm
150150200300300
250250300400400
BETEX 48 is available in 5 typesBETEX 49 is available in 4 types
29
BETEX®
MECHANICAL PULLERS BETEX 52Patented self-centering 3-arm pullers (mechanical and hydraulic) for diameterØ40 mm till Ø640 mmThe 3 arms of these pullers adjust themselves simultaneously and symmetrically,inwards or outwards. There is no possibility of the arms bending or deflecting.Hydraulic screws with a 20 ton capacity are available for use in combination with thetwo largest pullers. The thread of the screws is in no way affected by the building upof hydraulic pressure, thus keeping wear and tear to the screws down to a minimum.
BETEX 54Patented 2-arm pullers for diameter Ø40 mm till Ø350 mmThis 2-arm puller is extremely well-suited to applications involving the extraction ofbearing-rings, innerrings (NU-NJ). Reversal of the arms makes internal dismantling also possible. The self-locking system guarantees that the arms will not deflect. Extended and extra-extended arms can be supplied for long shafts.
Type Max. diam. mm
Max. shaft length mm
Type Max. diam. mm standard with extension with extra
extension
52-08552-13052-23052-295
52-390/394*52-640/644*
85130230295390640
65105150235270300
54-10054-20054-30054-40054-50054-600
80120160200250350
100125150175200250
200200250250300300
250250300300400400
BETEX 52 with mechanical screw isavailable in 6 types
BETEX 54 with standard arm-lenght is available in 6 typesMaximum shaft length mm
* these types may be converted into hydraulic tools simplyby replacing the mechanical screw and the screw-bushwith a 20 ton mechanical hydraulic screw.
30
BETEX®
MECHANICAL PULLERS BETEX 56Internal 4-arm bearing pullers with interchangeable claws (in case)for total 66 bearings till Ø105 mmThis 4-arm bearing puller has been specially developed to extract ball-bearings from casings and shafts using a single action. This concerns the 6000, 6200, 6300 and 6400 series. 66 different ball-bearings can be removed with these three sets of pullers.
BETEX 44Hydraulic 8/15 tons mini-pressWhen using mechanical screws, much of the force is lost as a result of the friction causedby the thread. This minipress administers a shock to the part which is to be extracted. Thisenables optimal use to be made of BETEX pullers 52 and 54, without loss of force or wearand tear to screws. Note*: may be used from 49-200, 52-230 and 54-300 and upwards.* application: heavy duty pullers, BETEX 49-200, 52-230 en 54-300 upwards * height: 35 mm
BETEX 625/630Shaft protector sets for shaft centers and hollow shaftsThese shaft protectors are indispensable between shaft and bearing puller while dismantling bearings, couplings etc. There are two types: 625 for protecting shaft centers and 630 for hollow shafts.Use of shaft protectors prevents distortion to the shaft centers and the screw.
Type
44-08044-150
Capacityton
815
Strokemm
710
Betex 44 is available in 2 types
BETEX 625 consists of a 6-piece set'D' min. = Ø 19 mm 'H' min. = Ø 16 mm'D' max. = Ø 38 mm 'H' max. = Ø 19 mmBETEX 630 'S' consists of a 11-piece set'Db' min. = Ø 19 mm 'Du' min. = Ø 25 mm 'Db' max. = Ø 51 mm 'Du' max. = Ø 64 mmBETEX 630 'T' consists of a 6-piece set'Db' min. = Ø 54 mm 'Du' min. = Ø 67 mm'Db' max. = Ø 76 mm 'Du' max. = Ø 89 mm
'Du'
'Db'
'H'
'D'
Set Max. shaftlength mm
Claws (4 per set)
No of bearings
56-02056-12056-220
Set
56-02056-12056-220
6590150
Ball-bearing6000
6004 t/m 60066007 t/m 6020
6021
3 sets5 sets5 sets
Ball-bearing6200
6200 62056206 62126213 6219
123024
Ball-bearing6300
6300 63026303 63086309 6319
Ball-bearing6400
-6403 64056406 6412
BETEX 56 is available in 3 sets
31
BETEX®
MECHANICAL PULLERS
Countersupport type
Suitable forexpanders
Expander For diametermm
For max.depth mm
62-100
62-200
62-200/62-300
62-004➔62-030
62-040➔62-070
62-070➔62-0125
62-00462-00762-01062-01462-02062-03062-04062-05062-06062-07062-08062-010062-0125
4-77-1010-1414-2020-3030-4040-5050-6060-7070-8080-100100-125125-150
35353545509095959595140140140
***********************
****************************************
BETEX 62 is available in 3 setsThe two sets together come in a free carrying case
BETEX 62Internal expander puller up to a bore of Ø 150 mmThis special expander system has been developed to facilitate rapid and effective dismantling under difficult conditions,e.g. in ‘blind holes’. The multiple adjustable jaws (up to 6) ensure the correct grip from behind the bearing, bush etc.Bearings, bushes, sealings etc. are extracted effortlessly.
Smaller, larger and longer sizes are available on request.
= set 1 62-101= set 2 62-201= set 3 62-301= combination set 62-105, including free carrying case
**********
BETEX 62-9 Slide hammer pullerUsed in combination with the internal puller.Slide hammer weight: 0,9 kg2 sizes with strokes of 90 mm and 300 mm2 connecting threads (M10 and M14x1,5) The advantage of the slide hammer is thatit can be used independent of any supporting face. After positioning the internal puller the slide hammer is connected through the hexagon adaptor.We recommend: Up to bore-diameter 39,5 mm Nr. 62-9092Up to bore-diameter 79,5 mm Nr. 62-9302
32
BETEX®
MECHANICAL PULLERS BETEX 63, 64 / TRACTA These systems are unique and suitable for difficult dismounting jobs of roller bearings.
Advantages:• For all kinds of roller bearings • Shaft Ø 10,5 mm up to Ø 100 mm, larger sizes on request• Dismounting from house and shaft in one act • Also for flush fit bearings • Unlimited shaft lengths through extensions • 360°C grip over full bearing • Hydraulic type on request • Suitable for serial dismounting• Prevents damage to bearing, bearing house and shaft!
BETEX 63 BETEX 64
Type Shaft diam. mm
Outside diam.mm
Max stroke mm
Max shaft lengthmm
63-10063-20064-40064-50064-60064-70063-800
10,518
30,5466677100
26356075100125140
6264788092120150
95100135150170205240
165180235250270305390
BETEX 63, 64 / TRACTAMax shaft length mm
with extra extension
Larger models on request
33
BETEX®
MECHANICAL PULLERS Collets for BETEX 63 and 64
There are 4 different pulling principles that can be applied, depending on bearing type.To define the correct collet the following is mandatory:
Principle 1
Principle 2
Principle 3
Principle 4
Principle 4: grip inside or behind bearing inner ring, or behind bearing outside ring.
Example: cylindrical roller bearing, lowest innerring of the ball bearings,outside ring of the needle roller bearings, spherical roller bearings, NU-,NJ-bearing bushes, ABS-rings, bushes, gear wheels.
Principle 3: grip on bearing inner ring.
Example: tapered roller bearings.
Principle 2: grip on rollers, independent of number of rolls. Also when bearing isflush fit.
Example: wheel bearings, tapered bearings.
Principle 1: grip on inner bearing ring. Bearing is dismantled in one act, from shaftand bearing house.
Example: self aligning ball bearings, four point bearings and ballbearings with split innering.
34
EXPLANATION CYLINDERS
Series Description Type
SSSSLSSCSSHSJLLCJLPCSSA
ALNCACHCDAC
ADAC
General purpose, spring returnLow profile, spring returnCompact, spring returnHollow, spring returnLock nut, load return
Pan lock nut, load returnAluminium, spring return
Aluminium, lock nut, load returnAluminium, hollow, spring return
General purposeAluminium, hollow
Single ActingSingle ActingSingle ActingSingle ActingSingle ActingSingle ActingSingle ActingSingle ActingSingle ActingDouble ActingDouble Acting
Cylinders overview
Capacityton
5-1005-15010-10013-10050-100060-52050-10050-10030-6010-10030-60
Strokemm
25.4-3626-1738-578-15850-30045-5051-25451-25476-153255-33051-254
Page
3132333435363738394041
FEATURES:1. Betex® offers a wide selection of cylinder design,
capacity and stroke to match your daily requirements.2. Built for Rugged Industrial/Construction use. All Betex®
cylinders meet worldwide safety standards.3. Stop rings, plated pistons and heavy duty construction
provide trouble-free operation and long life.4. Heavy duty, wound steel-plated springs provide fast
and complete retraction, cycle after cycle, and retaintheir tension longer. Long-lasting springs contributesubstantially to cylinder life.
5. Threaded collars and internal plunger threads with-stand full loading for maximum flexibility in fixturing.
6. All Betex® cylinders incorporate a positive piston stopto limit piston travel at the end of the stroke, allowingthe cylinder to be operated at full stroke. Piston stopsadd strength and safety to your Betex® cylinder.
7. Rod wiper cleans the rod surface during retraction,protecting the inner cylinder assembly from dirt,moisture and other contaminants.
8. Most Betex® cylinders have a chrome-plated finish toprotect the cylinder from dirt, moisture and othercontaminants for long life.
Stop-rings for piston blow-out protection.
Heavy duty cylinder bodies –precision polished bore minimizes friction & wear.
Hard chrome-plated piston rodsresist scoring & corrosion.
Quality high-flow couplers with dust caps.
Brazing finish on piston rod for sideload protection and long life.
Standard heavy duty, heat treated,grooved load cap.
BETEX®
SSS series
CYLINDERS
Type Capacityton
Strokemm
Oil capcm3
A
Retracted
B
Extended
WeightKg
Dmm
Emm
Fmm
Hmm
Jmm
Kmm
Oø un
Pmm
Umm
Vø
Wun
Xmm
ZmmHeight mm
SSS51SSS53SSS55SSS57SSS59SSS101SSS102SSS104SSS106SSS108SSS1010SSS1012SSS1014SSS151SSS152SSS154SSS156SSS158SSS1510SSS1512SSS1514SSS1516SSS251SSS252SSS254SSS256SSS258SSS2510SSS2512SSS2514SSS308SSS502SSS504SSS506SSS508SSS5010SSS5013SSS756SSS7513SSS1006SSS10010
Model: SSS SeriesCapacity : 5-100 tonStroke : 25,4-362 mmMax. working pressure :10,000 psi / 700 Bar
• All rams are single acting with spring return. Pistons hard chromed.
• Rams inside roll-polished, outside blasted and chromed.
Power sources:Handpumps, Footpumps and air/ hydraulic pumps and electric pumps.Pump and cylinder sets:All cylinders are available as sets (cylinder, gauge, couplers, hose and pump) for your ordering convenience.
5
10
15
25
30
50
75
100
277612718123225.45510515520625730535625.451
101.6152.420325430535640625.550.8102
152.421026131136220951102159203260337156333168260
195490128164408716724632740848456650100199299398498598698824841683385056968651031120092336172311261446185323871619345722283449
11016521627332489121171247298350400451124
149.5200
271.5322373424475523
139.5165
215.5273324375425476
388.5176227288349385463288492357449
137241343454556
114.4176276402504607705807149
200.5301.6423.9525627729831829165
215.8317.5425.4534636736838
597.5227328447552645800444825525709
38
57
70
85
103
127
146
177
30
45
50
65
75
95
115
130
25.4
38
40
55
65
80
95
105
19
19
191919
25.425.425.425.425.4
25
57333333
3530
41
25
-40404040404040
38
50
50
70
70
70
6
-6666666
9.6
10.5
10.5
2
5
2
-16
#10-24un
1"-81"-81"-81"-81"-81"-81"-8
1"-8
1 -16
1 -16
-
-
-
3/4" 1/4"
3/8"
1/2"
1/4"
3/4"
5/16"
3/4"
1/2"
1/2"
7/8"3/4"
1/2"
1/2"
5/16"
1414141616616161616161616
25
25
25
-
-
-
25
39
47
58
-
95
--
139
-20un
-18un
-16un
-12un
-
-12un
-
-10un
1 -16
2 -14
2 -16
3 -12
4"-12
5"-12
5 -12
6 -12
28
30
30
50
50
55
45
45
14
12
12
19
-
19
-
25
11.51.92.42.81.82.33.34.45.46.46.88.23.34.15.06.88.29.510.911.812.85.96.48.210
12.214.116.317.718.115
19.123.127.130.437.629.55959
72.6
35
BETEX SSS series, single acting, spring return
BETEX®
36
Model: SLS SeriesCapacity : 5-150 tonStroke : 6-17 mmMax. working pressure : 10,000 psi / 700 Bar
• All rams are single acting with spring return.• Pistons hard chromed.• Rams inside roll-polished.• Rams outside blasted and chromed.
Type Capacityton
Strokemm
Oil capcm3
A
Retracted
B
Extended
WeightKg
Dmm
Eø
mm
Fø
mm
Gø
mm
Hmm
Kmm
Lmm
Mmm
Oø
mm
Pø
mm
Umm
Vø
mmHeight mm
SLS50SLS100SLS200SLS300SLS500SLS750SLS1000SLS1500
51020305075100150
612121316161617
4.518.034.054.0102.0166.0212.0342.0
33425158667985100
395463718295101117
58x4182x55101x76117x95140x114165x140
178x152.5216x190
Cmm
28.536
49.352.366.576.276.2117
3144607390115130160
25.438
50.863.570
82.592115
9.511151619
20.520.520.5
1619191919191923
11122222
2028.5394755697695
2234394455667482
--------
--------
--------
5.57.5101011
13.513.513.5
1.01.43.14.56.811.314.526.3
SLS series
CYLINDERSBETEX SLS series: shorty, flat, compact, spring return
BETEX®
37
BETEX®
Type Capacityton
Strokemm
Oil capcm3
A
Retracted
B
Extended
WeightKg
Dmm
Eø
mm
Fø
mm
Gø
mm
Hmm
Kmm
Lmm
Mmm
Oø
mm
Pø
mm
Umm
Vø
mmHeight mm
SCS101SCS201SCS302SCS502SCS1002
10203050100
3845626057
53.0127.0274.0381.0756.0
8898117122141
126143179182198
7093107125165
Cmm
-----
42607590130
3850657095
-----
1717192331
53321
-----
-----
M4M5M5M5M8
888810
2639393955
-----
4.15.06.810.922.7
SCS series
CYLINDERSBETEX SCS series, shorty, flat, compact, spring return
Model: SCS SeriesCapacity : 10-100 tonStroke : 38-62 mmMax. working pressure :10,000 psi / 700 Bar
• All rams are single acting with spring return.• Pistons hard chromed.• Rams inside roll-polished.• Rams outside blasted and chromed.
38
BETEX®
Model: SHS SeriesCapacity : 12-100 tonStroke : 8-158 mmMax. working pressure : 10,000 psi / 700 Bar
• All rams are single acting with spring return.• Pistons hard chromed.• Rams inside roll-polished.• Rams outside blasted and chromed.
Type Capacityton
Strokemm
Oil capcm3
A
Retracted
B
Extended
WeightKg
Eø
mm
Fø
mm
Hmm
Jmm
Kmm
Oø
un
Pmm
Umm
Vø
unc
Wø
un
Xmm
Yø
mm
ZmmHeight mm
SHS120SHS121SHS123SHS202SHS206SHS302SHS306SHS603SHS606SHS1003
121212202030306060100
842765215268.51587615383
1896175230671435100593218761774
60121180162310182332
247.5326.5254
68163256214462
250.5490
323.5479.5337
54.154.154.175759090125125165
Dø
mm353535
54.954.965659090125
737373100100114114
158.6158.6213
11.5191919192325323238
---
545463638989125
---991010
12.512.512
-16--
1 -161 -161 -161 -162 -162 -164"-12
16161619192222222228
50.8-
50.882.682.69292130130178
-18--18-16-16-16-16-12-12-11
2 -162 -162 -163 -123 -124 -124 -126 -126 -128 -12
30303038384242505060
19.519.519.527273636545479
9-
12.79.49.41414141419
1.53
4.27.513.511
20.426.434
50.1
SHS series Centre Hole ø
3/4"
9/16"9/16"7/8"7/8"3/4"3/4"
5/16"
5/16"3/8"3/8"3/8"3/8"1/2"1/2"5/8"
3/4"3/4"3/4"7/8"7/8"1/2"1/2"1/4"1/4"3/8"
CYLINDERSBETEX SHS series, center hole cylinders, spring return
39
LOCK NUT CYLINDERSBETEX JLLC series, single acting, loadreturn
Type Capacityton
Strokemm
Oil capcm3
Fmm
Hmm
Jmm
A
Retr.
B
Ext.
Smm
J1 mm K1 mm
Dø
mm
Eø
mm
WeightKg
JLLC502JLLC506JLLC5010JLLC1002JLLC1006JLLC10010JLLC1502JLLC1506JLLC15012JLLC2002JLLC2006JLLC20012JLLC3002JLLC3006JLLC30012JLLC4002JLLC4006JLLC400112JLLC5002JLLC5006JLLC50012JLLC6002JLLC6006JLLC60012JLLC8002JLLC8006JLLC80012JLLC10002JLLC10006JLLC100012
505050100100100150150150200200200300300300400400400500500500600600600800800800100010001000
50150250501502505015030050150300501503005015030050150300501503005015030050150300
354.51063.51772.5
66519953325100530156030134540358070
2167.56502.51300527558265165303532.510597.521195427412823256465970179103582072572177243544
Tr80x4Tr80x4Tr80x4Tr110x6Tr110x6Tr110x6Tr140x6Tr140x6Tr140x6Tr170x6Tr170x6Tr170x6Tr210x6Tr210x6Tr210x6Tr250x6Tr250x6Tr250x6Tr280x6Tr280x6Tr280x6Tr300x6Tr300x6Tr300x6Tr360x6Tr360x6Tr360x6Tr400x6Tr400x6Tr400x6
202020323232494949525252626262767676818181898989105105105108108108
707070707070125125125125125125155155155155155155175175175195195195225225225245245245
164264364187287387209309459243343493295395545335435585375475625395495645455555705495595745
21441461423743763725945975929349379334554584538558588542562592544564594550570510055457451045
353535454545454545505050606060707070808080858585100100100110110110
707070707070125125125125125125195195195225225225240240240275275275315315315355355355
242424242424202020202020757575858585909090959595120120120135135135
125125125165165165205205205235235235305305305355355355395395395425425425505505505555555555
959595130130130160160160185185185235235235265265265300300300330330330390390390430430430
152535304864537811783117170173233323250327441367466617446562737709870111094911411430
TypeTSA-100TSA-100TSA-100TSA-100TSA-100TSA-100TSA-200TSA-200TSA-200TSA-200TSA-200TSA-200TSA-300TSA-300TSA-300TSA-400TSA-400TSA-400TSA-500TSA-500TSA-500ATS-600ATS-600ATS-600ATS-800ATS-800ATS-800ATS-1000ATS-1000ATS-1000
JLLC series
Optional Tilt Saddle
TSA-Optional Tilt Saddle
Model JLLC300-1000T
Model JLLC50-200T
BETEX®
Lock NutCapacity : 50-1000 tonStroke : 50-300 mmMax. working pressure : 10,000 psi / 700 bar
Model: JLLC series• Single-acting, load return• Safety locknut for mechanical load holding• Chrome plated to prevent corrosion and to lower friction
for smoother operation• Withstands side-load forces up to 5% of rated cylinder
capacity without scoring• Stop ring for piston blow-out protection• Interchangeable, hardened, grooved saddle as standard• High flow coupler and dust cap included on all models
Height mm
40
Model: JLPC series• Extremely low height for use in confined areas• Single-acting, load return• Locknut for positive and safe load holding over a long
period of time • Chrome plated to prevent corrosion and to lower
friction for smoother operation• Withstands side-load forces up to 3% of rated cylinder
capacity without scoring• Overflow port functions as a stroke limiter• High flow coupler and dust cap included on all models
LOCK NUT CYLINDERSBETEX JLPC series, single acting, load return
Type Capacityton
Strokemm
WeightKg
Oil capcm3
A
Retr.JLPC602JLPC1002JLPC1502JLPC2002JLPC2502JLPC4002JLPC5002
60100150200250400500
50504545454545
1526445774134189
433715963
1273.5171025743179
125137148155159178192
JLPC series
Capacity : 60-500 tonStroke : 45-50 mmMax. working pressure : 10,000 psi / 700 bar
B
Ext.175187193200204223237
Dmm
140175220245275350400
Eø
mm105135165190215270300
Fø
mmTr105x4Tr135x6Tr165x6Tr190x6Tr215x6Tr270x6Tr300x6
Hmm
20212730323948
Jø
mm96126150180200250285
Kmm
68910111110
Rmm
5˚5˚5˚5˚5˚5˚5˚
Smm
28314043445562
BETEX®
Height mm
Model: SSA series• 8 standard models available for 50 to 100 tons.• Up to 60% lighter than steel cylinders.• Heavy-duty spring for easy and full retraction.• Large saddle surface for angle load protection.• High-flow quality couplers.• All models are provided with carrying handles.• Rod wiper protects inner rod from dirt.• Hard-anodized housing and piston reduce wear and
corrosion.Custom stroke lengths and capacities are available.
Capacity : 50-100 tonStroke : 50-250 mmMax. working pressure : 10,000 psi / 700 bar
Type Capacityton
Strokemm
Oil capcm3
A
Retracted
B
Extended
WeightKg
Cø
mm
Dø
mm
Eø
mm
Fø
mm
Gø
mm
Kmm
Umm
Vmm
Zmm
SSA502SSA504SSA506SSA5010SSA1002SSA1004SSA1006SSA10010
50505050100100100100
5010015025050100150250
35470810621770663132619893315
165215265365165215265365
215315415615215315415615
95959595130130130130
140140140140203203203203
80808080110110110110
6060606090909090
38.138.138.138.138.138.138.138.1
33333333
110110110110160160160160
M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0
66666666
67.78.216.418.220.522.730.9
SSA series
ALUMINIUM CYLINDERSBETEX SSA series, aluminium cylinders, spring return
41
Height mm
BETEX®
Model: ALNC series• Half the weight of steel cylinders• Locknuts offer extended load holding• Large bearing surfaces for side load protection• Carrying handles standard on all models• Hard-anodized coating reduces wear & corrosion• Stop rings for piston blow-out protection• Heavy duty spring for fast & full return
42
ALUMINIUM CYLINDERSBETEX ALNC series, load return, lock nut type
Load Return, Lock nut typeCapacity : 50-100 tonStroke : 50-250 mmMax. working pressure : 10,000 psi / 700 bar
Model ALNC cilinders 50-100T
BETEX®
Cilindermodel/
capacity ton
Boltcircle U mm
ThreadV
mm
Thread DeptX
mmALNC-50ALNC-100
110170
M6 x 1.0M6 x 1.0
1010
Base Plate Mounting holes dimensions (mm)
Type Capacityton
Strokemm
WeightKg
Oil capcm3
A
Retr.
B
Ext.
Dmm
Eø
mm
Fø
mm
Hmm
Jø
mm
Kmm
Smm
ALNC502ALNC504ALNC506ALNC5010ALNC1002ALNC1004ALNC1006ALNC10010
50505050100100100100
5010015025050100150250
1012.714.518.220.525
29.137.3
354.5709
1063.51772.5663.51327
1990.53317.5
206257308409213264315416
257359461663264366468670
135135135135198198198198
95959595130130130130
Tr80x4Tr80x4Tr80x4Tr80x4Tr105x6Tr105x6Tr105x6Tr105x6
3838383838383838
6060606090909090
33333333
3636363643434343
ALNC series
Height mm
MODEL:ALNC50-100T
U
V
H
A
B
S
K
E F J
Z
3/8"-NPT
���
D
6
Model: ACHC series• Half the weight of steel cylinders• Heavy duty spring for fast & full return• Chrome plated centre hole for extra protection • Large bearing surfaces for side load protection• Carrying handles standard on all models• Hard-anodized coating reduces wear & corrosion• Stop rings for piston blow-out protection• Rod wiper protects inner cylinder from dirt
43
ALUMINIUM CYLINDERSBETEX ACHC series, spring return, hollow
Type Capacityton
Strokemm
WeightKg
Oil capcm3
A
Retracted
B
Extended
Dø
mmHeight mm
ACHC302ACHC306ACHC602ACHC606
30306060
5015050150
1014
19.525
3627286841377
177305177305
227455227455
135135198198
Eø
mm9090125125
Fø
mm65659090
Hmm
35353535
Jø
mm63638989
Kmm
11.511.51414
Lmm
36365454
ACHC series
Cilindermodel/
capacity ton
Boltcircle U mm
ThreadV
mm
Thread DeptZ
mm
ACHC-30ACHC-60
110160
M6 x 1.0M6 x 1.0
1010
Base Plate Mounting holes dimensions (mm)
Spring Return, Hollow typeCapacity : 30 & 60 tonStroke : 50-150 mmMax. working pressure : 10,000 psi / 700 bar
Model ACHC 30-60T
BETEX®
Model: DAC series, double actingCapacity : 10-100 tonStroke : 153 - 460 mmMax. working pressure : 10,000 psi / 700 bar
• Perfect for construction, shipyards, utilities, mining andequipment maintenance.
• Hard chromed piston.• Ram inside roll-polished.• Ram outside blasted and chromed.
Type Capacityton
Push Pull
Strokemm
Oil capcm3
Push Pull
A
Retracted
B
Extended
WeightKg
Eø
mm
Fø
mm
Hmm
Imm
Jø
mm
Kmm
Oø
un
Pmm
Umm
Vmm
Zmm
Wø
un
XmmHeight mm
DAC1010DAC1012DAC2512DAC308DAC3014DAC506DAC5013DAC 5018DAC756DAC7513DAC1006DAC10013
10102530305050507575100100
4.54.513151528282835354545
255305305204356153356460153356153356
405485150090115721084233932801589342720304380
160190720440760320680167350510909452040
408458470
386.5551.5336511658353524359526
663763775
590.5907.54898411118506854512856
4545567575959595115115130130
Dø
mm353550555580808095959595
7878101103103127127127146146177177
363636363630303030303838
575726808076767675757171
505050505070707070707070
66101010333331010
1"-81"-8
1 -161 -161 -161"-121"-121"-121"-121"-12
1 -121 -12
2020253030
25.425.425.438383535
----------
139139
-----------10-10
----------
25.425.4
2 -14 2 -14 4"-124"-12 4"-12 5"-12 5"-125"-12
5 -12 5 -126 -12 6 -12
272740505050505050505050
131529202929436540585983
DAC series
1/2"
1/2"
1/2"
3/4"3/4"
3/4"3/4"
1/4"1/4"
3/4"3/4"7/8"7/8"
CYLINDERSBETEX DAC series, double acting
44
BETEX®
Model: ADAC series• Half the weight of steel cylinders • Steel piston for protection against load damage• Chrome plated centre hole for extra protection • Carrying handles standard on all models• Hard-anodized coating reduces wear & corrosion• Stop rings for piston blow-out protection• Rod wiper protects inner cylinder from dirt
45
ALUMINIUM CYLINDERSBETEX ADAC series, double acting, hollow
Type Capacityton
Strokemm
Capacityton
Push
CapacitytonPull
Oil capcm3
Push
Oil capcm3
PullADAC302ADAC306ADAC3010ADAC602ADAC606ADAC6010
303030606060
5015025050150250
333333626262
212121414141
2387151192447.513422237
152456
760.52958861477
ADAC series
WeightKg
9.31316
15.523
30.5
Cilindermodel/
capacity ton
Boltcircle U mm
ThreadV
mm
Thread DeptZ
mmADAC-30ADAC-60
110160
M6 x 1.0M6 x 1.0
1010
Base Plate Mounting holes dimensions (mm)
Double acting, hollowCapacity : 30-60 tonStroke : 50-250 mmMax. working pressure : 10,000 psi / 700 bar
177305430177305430
227455680227455680
135135135198198198
909090125125125
656565909090
353535353535
454545454545
636363898989
11.511.511.5141414
363636545454
A
Retr.
B
Ext.
Dø
mm
Eø
mm
Fø
mm
Hmm
Imm
Jø
mm
Kmm
Yø
mm
BETEX®
Height mm
Model ADAC cilinders 30-60T
46
BETEX®
HEAVY-DUTY HAND PUMPSBETEX PB/HC series, steel hand pumps, heavy duty, 700 bar
Type
1st stage 2nd stage
Amm
Bmm
Cmm
Dmm
Emm
Oil portthread
F
WeightKg
Pressure rating(bar)
Oil volumeper stroke cm3
Usable oil capacity
cm3
PB350PB600PB700
HC1500HC2000
13,813,813,813,813,8
700700700700700
35060070015002000
13,013,013,013,013,0
2,82,82,82,82,8
335543632633580
303480541551523
909090106140
146146146200189
128142128142148
5,57,67,311,211,5
2nd stage1st stage
PH/HC series
Model: PB series• Betex heavy duty hand pumps feature a forged
construction.• The drop-forged base and rugged welded construction
effectively prevents collision damage and deformation.• The professional choice for a wide range of industrial
applications.• Internal overload valve prevents pump from being used
beyond its rated capacity.• Two-speed pumps provide rapid pumping to load the
cylinder quickly.• External adjustable relief valve with locking mecha-
nism.• Carrying handles for easy portability.
Also available as a HANDPUMPSET, this includes:• T-adaptor• gauge• hose, 1,8 meter• couplers• steel storage case
-NPT3/8"
-NPT3/8"
-NPT3/8"
-NPT3/8"
-NPT3/8"
Handpumpset PB 700
47
BETEX®
HEAVY-DUTY ALUMINIUM HAND PUMPS BETEX AHP series, aluminium hand pumps
Model: AHP series• Our hand pumps are always characterized by their
rugged construction and easy-operation handles.• Aluminium alloy construction and handy release
knobs with locking mechanism are perfect forindustrial applications and daily operations.
• Special lightweight design with aluminium alloyconstruction makes for an easily portable andmobile unit.
• Specially designed AHP703D is for double-actingcylinders without the need for extra controllingvalve and adapters.
Also available as a HANDPUMPSET, this includes:• T-adaptor• gauge• hose, 1,8 meter• couplers• steel storage case
Type Usable oilcapacity
cm3
Oil volume perstroke cm3
1st stage 2nd stage
WeightKg
Bmm
Cmm
Dmm
Emm
Fmm
Gmm
Hmm
I
AHP701AHP702AHP703AHP703D
350100020002000
12.912.912.912.9
12.32.32.3
361513556556
Amm
110110150150
391542623623
7777102102
140130135135
127127135135
42.542.550
24/37
37---
-NPT-NPT-NPT-NPT
2.33.56
7.0
AHP series
Pressure rating(bar)
1st stage 2nd stage13.813.813.813.8
700700700700
3/8"3/8"3/8"3/8"
Handpumpset AHP 702
48
HEAVY-DUTY ALUMINIUM HAND PUMPS BETEX HP35 series, steel hand pumps, heavy duty, 700 bar
Model: HP seriesMax. working pressure : 10,000 psi / 700 bar.Large 3/8” pressure port for maximum flow.Low Handle effort for easy operation.Two speed models.
Model HP35
Model HP35D (double acting)
BETEX®
Model: HP series• Our hand pumps are always characterized by their
rugged construction and easy-operation handles.• Aluminium alloy construction and handy release
knobs with locking mechanism are perfect for industrial applications and daily operations.
• Special lightweight design with aluminium alloy construction makes for an easily portable and mobile unit.
• Specially designed HP35D is for double-acting cylinders without the need for extra controlling valveand adapters.
Type Usable oilcapacity
cm3
Oil volume perstroke cm3
1st stage 2nd stage
WeightKg
Bmm
Cmm
Dmm
Emm
Fmm
Gmm
Hmm
I
HP35HP35D
35003500
4040
33
586663
Amm
146146
629706
79.779.7
79.779.7
79.779.7
22.3536
4545
-NPT-NPT
16.516.8
HP series
Pressure rating(bar)
1st stage 2nd stage2828
700700
3/8"3/8"
HEAVY-DUTY HAND PUMPSBETEX HP80 series, steel hand pumps, heavy duty, 700 bar
HP series
Model: HP series hand pumps• Rugged construction made of steel• Automatic 10,000 psi overload-relief valve protects
components in hydraulic systems and ensures safeoperation
• New inlet/outlet design features slow deflation functionreducing noise, and allows multidirectional operation
• Two-speed pumps provide rapid pumping to load thecylinder quickly
• Specially designed HP80D is for double-acting cylinders without the need for extra controlling valveand adapters
BETEX®
I
A
D
3/8"-NPT
G
15°
BC
EF
HJ
49
Type Usable oilcapacity
cm3
Oil volume perstroke cm3
1st stage 2nd stageHP80
HP80D80008000
113113
44
Amm
700700
Bmm
300300
Cmm
312312
Dmm
420420
Emm
275275
Fmm
208.5216.5
Gmm
315.5338.5
Hmm
Imm
99
Jmm
1414
WeightKg
2424
Pressure rating(bar)
1st stage 2nd stage27.527.5
700700
-NPT3/8"
-NPT3/8"
HEAVY-DUTY HAND PUMPSBETEX HP160 series, steel hand pumps, heavy duty, 700 bar
HP series
Model: HP series hand pumps• Rugged construction made of steel• Automatic 10,000 psi overload-relief valve protects
components in hydraulic systems and ensures safeoperation
• New inlet/outlet design features slow deflation functionreducing noise, and allows multidirectional operation
• Two-speed pumps provide rapid pumping to load thecylinder quickly
• Specially designed HP160D is for double-acting cylinders without the need for extra controlling valveand adapters
BETEX®
I
A
D
3/8"-NPT
G
15°
BC
EF
HJ
50
Type Usable oilcapacity
cm3
Oil volume perstroke cm3
1st stage 2nd stageHP160
HP160D1600016000
113113
44
Amm
700700
Bmm
300300
Cmm
400400
Dmm
420420
Emm
275275
Fmm
242242
Gmm
310310
Hmm
Imm
99
Jmm
1414
WeightKg
3536
Pressure rating(bar)
1st stage 2nd stage27.527.5
700700
-NPT3/8"
-NPT3/8"
51
BETEX®
HEAVY-DUTY FOOT PUMPSBETEX FHB series, foot pumps
Type Usable oilcapacity
cm3
Oil volume perstroke cm3
1st stage 2nd stage
Output flow rate(cc)
Unload Load
WeightKg
Bmm
Cmm
Dmm
Emm
Aircons.
F
FHB350FHB600FHB700
350700700
13.013.013
2.82.82.8
174174174
Amm
192192192
474660708
171717
461647695
---
---
---
-NPT-NPT-NPT
8.510.811.1
FHB series
Pressure rating(bar)
1st stage 2nd stage13.813.813.8
700700700
3/8"3/8"3/8"
Model: FHB series• Betex® innovative foot pumps are not only attractively
designed, but are also durable and stable• Foot-operated pump and release pedal, providing
accurate control for operating in different conditions• Single & double acting forged metal versions available• Spring-loaded foot pedal is convenient and easy to
operate• Internal overload valve prevents pump from being used
beyond its rated capacity
Max. working pressure: 10,000 psi / 700 bar.Large⅜" pressure port for maximum flow. Low pedal effort for easy operation. Single & double acting models.Metal pump.
AIR PUMPSBETEX AP921 series, air-hydraulic foot pumps, 700 bar
Model: AP series, air-hydraulic pump • The air-driven hydraulic pump is designed for use with single-
acting cyinders and tools like the Betex cylinder serie• Rugged construction: most components are made of aluminium
alloy and are built for long service life, easy operation and portability
• Automatic 10,000 psi overload-relief valve protects componentsin hydraulic systems and ensures safe operation
• New inlet/outlet design features slow deflation function reducingnoise, and allows multidirectional operation
BETEX®
52
AP921
AP series
Type Usable oilcapacity
cm3
Oil volume perstroke cm3
1st stage 2nd stage
WeightKg
Bmm
Cmm
Dmm
Emm
F Gmm
AP921 750 530 130 170
Amm
89442 - - 3-8 bar 179 5.4
max.Pressure
(bar)700
AIR PUMPS
Modell: AP series, air-hydraulic pump• The air-driven hydraulic pump is designed for use with
single-acting cylinders and tools like the Betex cylinderserie
• Rugged construction: most components are made of aluminium alloy and are built for long service life, easy operation and portability
• Automatic 10,000 psi overload-relief valve protects com-ponents in hydraulic systems and ensures safe operation
• New inlet/outlet design features slow deflation function reducing noise, and allows multidirectional operation
• The AP1600D + AP3000D-models are specially designedfor double-acting cylinders without the need of anadditional control valve and connecting pieces
BETEX®
���
���
��
���
�������
���
Air Hydraulic PumpModel:AP1600SRated Pressure:10000 psiOil Capacity:1600 c.c.
AP1600S
53
AP1600S
AP3000D
AP3000S
AP1600D
AP series
Type Usable oilcapacity
cm3
Oil volume perstroke cm3
1st stage 2nd stage
WeightKg
Bmm
Cmm
Dmm
Emm
F Gmm
AP1600SAP1600DAP3000SAP3000D
1600160030003000
1250125012501250
193193193193
128128160160
Amm
90909090
242242305305
258258325325
154154152152
3-8 bar3-8 bar3-8 bar3-8 bar
205205205205
7.58.310
10.3
max.Pressure
(bar)700700700700
BETEX AP1600/3000 series, air-hydraulic foot pumps, 700 bar
AIR PUMPSBETEX AP8000 series, air-hydraulic foot pumps, 700 bar
BETEX®
54
BETEX AP series, air pump• Two speed operation for fast speed cylinder advance• 8 Liter durable aluminium reservoir • Air motor capable of starting under full load• Automatic 10,000 psi overload-relief valve protects
components in hydraulic systems and ensures safeoperation
• Specially designed AP8000D is for double-acting cylinders without the need for extra controlling valve and adapters
E
B CF
H
A
D
AP series
Type Usable oilcapacity
cm3
Oil volume perstroke cm3
1st stage 2nd stage
WeightKg
Bmm
Cmm
Dmm
Emm
F Gmm
AP8000SAP8000D
80008000
47004700
280280
312312
Amm
312312
505505
142142
251251
3-8 bar3-8 bar
--
2020
max.Pressure
(bar)700700
ELECTRIC PUMPSBETEX EP18 series, electric pumps, 8L, 700 bar
BETEX®
55
MODEL:EP18D
EP series
Type max.Pressure
(bar)
Usable oilcapacity
350 bar 700 bar0 bar 70 bar
WeightKg
Bmm
Cmm
Dmm
Emm
Fmm
Gmm
EP18SEP18D
700700
8L8L
0.330.33
0.260.26
4.24.2
3.13.1
142142
Amm
312312
505505
251251
395395
312312
149.5149.5
3131
Acting
singledouble
EP18D
EP18D
Model: EP18 series electric pumps• Electric pump 1/2 HP 230V 50/60 Hz universal
induction motor, thermal protected• Low motor RPM and very quiet (about 80dBA at 700
Bar)• Two speed operation• 24V remote control incl cord (3m)• Internal overload valve prevents pump from being
used beyond its rated capacity• Automatic 10,000 psi overload-relief valve protects
components in hydraulic systems and ensures safeoperation
• Specially designed EP18D is for double-acting cylinders without the need for extra controlling valveand adapters
• Meets CE requirements
5,00
4,00
3,50
3,00
2,00
1,50
1,00
0,50
0,10
0,05
Ölv
olum
en (
Lite
r /M
in.)
70 140
210
280
350
420
490
560
630
700
Druck (Bar)
Oil volume (Liter/Min.)
Type Valve Funktion MotorEP18S single
EP18D double
2 pos./2-way3 pos./4-way
advance/ return/hold
0.37kW, 220V,50/60Hz,
single phase
EP18S, EP18D
ELEKTRISCHE PUMPENBETEX EP211 series, electric pumps, 11L, 700 bar
BETEX®
56
D
C
G
F
B
E
A
EP series
EP211D
Modell: EP211 series electric pumps• Electric pump 1/2 HP 230V 50/60 Hz universal
induction motor, thermal protected• Low motor RPM and very quiet (about 80dBA at 700
Bar)• Two speed operation• 24V remote control incl cord (3m)• Internal overload valve prevents pump from being
used beyond its rated capacity• Automatic 10,000 psi overload-relief valve protects
components in hydraulic systems and ensures safeoperation
• Specially designed EP211D is for double-acting cylinders without the need for extra controlling valveand adapters
• Meets CE requirements
9,0
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0,0
Ölv
olum
en (
Lite
r /M
in.)
70 140
210
280
350
420
490
560
630
700
Druck (Bar)
EP211D
Type max.Pressure
(bar)
Usable oilcapacity
350 bar 700 bar0 bar 70 bar
WeightKg
Bmm
Cmm
Dmm
Emm
Fmm
Gmm
EP211SEP211D
700700
11L11L
0.840.84
0.650.65
8.28.2
7.47.4
170170
Amm
229229
555555
180180
480480
350350
300300
3737
Acting
singledoublet
Oil volume (Liter/Min.)
Type Valve Funktion MotorEP211S single
EP211D double
2 pos./2-way3 pos./4-way
advance/ return/hold
1.12kW, 220V,50/60Hz,
single phase
EP211S, EP211D
Model: AHP/UHP serie• AHP704: high working pressure up to 1000 / 1500 bar• UHP2800 light weight model for ultra high working
pressure of 2800 bar for special applications• Automatic overload-relief valve protects components
in hydraulic systems and ensures safe operation
Also available as HANDPUMPSETS, which are supplied complete with:• T-adaptor• gauge• hose, 1,8 meter• couplers• storage case
57
Type Usableoil cap.
cm3
Oil volume perstroke cm3
1st stage 2nd stage
WeightKg
Bmm
Cmm
Dmm
Emm
Fmm
Gmm
Hmm
I
AHP704AHP705UHP2800
100027001000
12.96.512.9
1.651
0.65
501629488
Amm
11015080
539699620
77102140
145152108
127157157
42.55026
373737
-16UNF- NPT-16UNF
3.56.75.3
AHP/UHP series
Pressure rating(bar)
1st stage 2nd stage13.813.814
100015002800
3/4"
3/8"
3/4"
BETEX AHP/UHP series, ultra high pressure aluminium hand pumps: 1000 / 1500 / 2800 bar
HEAVY-DUTY ALUMINIUM HIGH PRESSURE HAND PUMPSBETEX®
UHP2800
AHP704
AHP705
Handpumpset UHP 2800
58
BETEX UHAP series, ultra high pressure aluminium air pumps, 2800 Bar
HIGH PRESSURE AIR PUMPSBETEX®
UHAP series
Type Art.no. Oil capacity Max. capacity WeightKg
AIR PUMP UHAP 2800AIR PUMP UHAP 2800 ULTRA
0,43 Liter p/Min, at 7 air pressure0,75 Liter p/Min, at 7 air pressure
2932
Capacity
2800 Bar2800 Bar
72928037292802
3 Liter3 Liter
Model: UHAP2800Capaciteit: 2800 BarOlie capaciteit: 5 litermax. cap.: 0,43 liter p/min,
by 7 Bar air pressure
Model: UHAP2800 ULTRACapaciteit: 2800 BarOlie capaciteit: 3 litermax. cap.: 0,75 liter p/min,
by 7 Bar air pressure
Both pumps are inclusive:• Gauge ( 0-3000 Bar scale)• HD Hose (3 Mtr incl. extra couplerset)• Couplers 1/4"
59
Type
Rubber
End one End two Lenght(mm)
ID(mm)
HS332HS333HS335HS336HS338HS3310HS3312HS3315HS3320HFHS332-BGHFHS333-BGHFHS335-BGHFHS336-BGHFHS338-BGHFHS3310-BGHFHS3312-BGHFHS3315-BGHFHS3320-BGPolyurethane PHS332PHS333PHS336PHS3310PHS3315PHS3320HPHS332HPHS333HPHS336HPHS3310HPHS3315HPHS3320CouplersCP330BCP331BCP332BCP430CP431CP432
60090015001800240030003600450060006009001500180024003000360045006000
6001000180030004500600060010001800300045006000
6,46,46,46,46,46,46,46,46,49,4 high flow9,4 high flow9,4 high flow 9,4 high flow9,4 high flow9,4 high flow9,4 high flow9,4 high flow9,4 high flow
9,79,79,79,79,79,79,7 high flow9,7 high flow9,7 high flow9,7 high flow9,7 high flow9,7 high flow
NPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPT
NPTNPTNPTNPTNPTNPT
3/8"3/8"3/8"
3/8"
NPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPT
NPTNPTNPTNPTNPTNPT
3/8"3/8"3/8"
3/8"
3/8"3/8"3/8"3/8"
3/8"3/8"3/8"3/8"3/8"3/8"
3/8"3/8"3/8"3/8"
3/8"3/8"
3/8"
3/8"
3/8"3/8"3/8"3/8"3/8"
3/8"3/8"3/8"3/8"3/8"
3/8"3/8"3/8"3/8"
3/8" 3/8"
3/8"
3/8" 3/8"
3/8"
3/8"3/8"3/8"
3/8"
ACCESSORIES Max. Working Pressure -700 bar/10,000 psi
BETEX®
With this simple yet complete line of accessories consisting of hydraulic hoses, couplings, manifolds, pressure gauges, Betex has the right accessory for a se-cure and optimally functioning system
COUPLER SETS• BETEX supplies a variety of screw-set quick couplers
in four different sizes. These can also be used withexisting hydraulic systems.
• All couplers are rated to 700 bar, and have an anti-leakmechanism that works in either low- and/or high-pres-sure conditions.
HS 332
HFHS 332
CP330B CP331B CP332B
Quick koppelingsetCoupler set female Coupler set male Quick connection coupler setQuick connection coupler femaleQuick connection coupler male
Type Description Dimensionsmm
M0031BLiquid-filled, dampens needle
vibration.Calibrated to read in bar, psi.
Dial – 2½"; Accuracy, meets DIN Standard
±1.6% of full scaleThread: NPT
M0040All functions similar to M0031B
except the dial 100 mm
1/4"
MANOMETER
NPTNPTNPTNPTNPTNPT
NPTNPTNPTNPTNPTNPT
3/8"3/8"3/8"3/8"3/8"3/8"
3/8"3/8"3/8"
3/8"
NPTNPTNPTNPTNPTNPT
NPTNPTNPTNPTNPTNPT
3/8"3/8"3/8"3/8"3/8"3/8"
3/8"3/8"3/8"3/8"
3/8" 3/8"
HOSES• Heavy-duty hoses rated at 700 bar, meet IJ-100
specifications• Hoses are black rubber coated with two layers of steel
braided reinforcement, I/D of 1/4''.• Flexible hoses with spring guards at both ends to
protect the adapters. Available to special lengths uponrequest.
60
ACCESSORIES Max. Working Pressure -700 bar/10,000 psi
Typ Description Dimensionsmm
ADL101 Elbow
FITTINGS
ADL202 Elbow
ADL303 Elbow
ADC303 Elbow
ADE303 Elbow
ADT101 T-adaptor
ADT202 T-adaptor
ADT303 T-adaptor
ADG303 T-adaptor
ADG323Manometer-connectorhigh flow
3/8"-NPT3/8"-NPT 1/4"-NPT
ADG323 Tee adapter
?8
28.5
76
ADF102 Adaptor
BETEX®
Type Description Dimensionsmm
JP64 Manifold valve
JP65
JP66
VB66
VB101
Manifold valve
Manifold valve
Manifold valve
VB201 Manifold valve
VC331
VB401
One-way reliefvalve
Manifold valve
E0567 Manometer-connector
E1336 Manometer-connector
E1343 Manometer-connector
E1745 Manometer-connector
Manifold valve
61
ACCESSORIES Max. Working Pressure -700 bar/10,000 psi
FITTINGS
ADO303 HexagonNipple
BETEX®
Type Description Dimensionsmm
ADF302 Adaptor
ADF303 Adaptor
ADF304 Adaptor
ADI202 Connector
ADI203 Connector
ADI303 Connector
ADO2031 ReducingConnector
ADO203 ReducingConnector
ADO101 HexagonNipple
ADO202 HexagonNipple
ADO204 HexagonNipple
Type Description Dimensionsmm
ADO205 HexagonNipple
ADF203 Adaptor
BG9623 Pressure regulator
BG9705 High flow swivel
connector
3/8"-NPT
3/8"-NPT
?7
7?
21
24.5
70
62
ACCESSORIES Max. Working Pressure -700 bar/10,000 psi
BETEX®
Type Description Dimensionsmm
BP2 700 bar; 17l/min Manual, 2-position,
Advance/Retract for single-acting cylinders
3-WAY Directional Control Valve
Type Description Dimensionsmm
BP421
BP422
BP423*BP425
for use with double-acting cylinder
or two single-acting cylinders
700 bar; 17l/minManual, Advance/Hold/
Retract
Manual, Advance/Hold/Retract;
Lock for Load Holding
4-WAY Directional Control Valve
JACKSBETEX CJ series, with integrated pump and cylinder, low height jacks
Model: CJ seriesSpring-loadedAvailable in :10 or 20 ton.Stroke : 41 mm.Max. working pressure : 10,000 psi / 700 bar.
• Hard chromed piston.• Ram inside roll-polished• Perfect for jobs with limited space, like
positioning machines, mounting tools orload tests.
63
BETEX®
CJ series
Type Capacityton
Strokemm
Oil capcm3
A
Retracted
B
Extended
WeightKg
Cø
mm
Dmm
Eø
mm
Fø
mm
Hmm
Kmm
Lmm
Mmm
Nmm
Pø
mmHeight mm
CJ100CJ200
1020
4141
155250
9595
136136
4040
152.5152.5
4565
37.9550.8
407.5407.5
4.94.9
85110
9090
90110
53.869.5
5.58
64
BETEX®
Toe jacks• Heat-treated and chrome-plated hydraulic rod
provides longer seal life and optimumperformance.
• Internal safety valve prevents toe jack beingused beyond its rated capacity.
• Leakages are prevented by welding thehousing onto the forged base.
• Strong toe lift for long service life.• Low toe heights for tight spaces.• Swivel sockets for easy operation.• Toe jacks can be operated quickly by hand
without a load.• Removable handle makes unit easier to
operate.
Type Top cap.U (tons)
Top-lift cap.F (tons)
Strokemm
Min. heightA mm
Max. heightB mm
Piston roddiam. J mm
Basedimensions
LxW mm
HeightH mm
Top-liftL1xW1
mm
Weightkg
TOE-025TOE-040TOE-060TOE-100TOE-160TOE-200TOE-300TOE-500
2.5461016203050
1.22358101525
100110110130131140147148
194204212258275303322333
294314322388406443469481
1925364052567090
140x190150x200160x217189x242211x256228x274259x305299x347
1919192225253238
65x5065x5065x5075x5590x55100x60110x60150x60
6.5810
11.92331
47.377.5
Toe jacks series
TOE JACKS BETEX TOE JACKS SERIES
65
BETEX®
PORTABLE MAINTENANCE SET
Type PPK 4 Description 4 t Type PPK 10 Description 10 t
PA351HS236PA404SR05AB0523B0524B0525B0526B0467F0180F0181F0182F0183F0184B0540F0179G0026
"heavy duty" hydraulic hand pumpHD hose 1,8 meter4-tons cylinder with 101,6 mm strokespreader 0,5 tonextension rod 406,4 mmextension rod 304,8 mmextension rod 203,2 mmextension rod 101,6 mmmale connectorflat base90 degree V basespreaderplunjer toeram toerubber flexible headserrated saddletransport case
PA603HS236PA106ASR05AB0519B0520B0521B0522B0406F0174F0175F0176F0177F0178B0541F0173G0021
"heavy duty" hydraulic hand pumpHD hose 1,8 meter10-tons cylinder with 152,4 mm strokespreader 0,5 tonextension rod 482,6 mmextension rod 355,6 mmextension rod 254 mmextension rod 127 mmmale connectorflat base90 degree V basespreaderplunjer toeram toerubber flexible headserrated saddletransport case on wheels
Set PPK 4 (art.nr. 7560804)incl. 4 t cylinder, 100 mm stroke, in portable transport case
Set PPK 10 (art.nr. 7560810)incl. 10 t cylinder, 150 mm stroke, in portable transport case on wheels.
• ‘Snap-on’ design for quick and easy assembly anddisassembly.
• Extra thick extension rods designed for strengthprevent bending.
• Single acting pump, 700 bar with safety valve toprevent overloading.
• Flexible hydraulic hose, 1.8 mtr.• Versatile through many different accessories! • All parts are made of forged steel.
BETEX PPK Portable Power Kits
66
BETEX®
HYDRAULIC SPREADERS/LIFTING WEDGES
Various combination sets* available incarrying case, including:• hydraulic spreader/lifter• 2-stage handpump• hose, 1.8 mtr• pressure gauge• T-adapter• male (hose) half coupler• complete quick coupler
Loads are lifted perpendicularly!• Ideal for numerous industrial maintenance repair jobs.• Accurate height adjustments (for instance shaft alignment)
can easily be executed by one person.• Easy, light and very practical to use. Particularly
suitable when available space is very limited.• Suitable for spaces of 5 to 43 mm.• Due to the reduced thickness of the jaws,
made of high quality hardened steel, these multi-functional wedges can be used for jobs where working space is extremely limited.
25 TLS SPREADER/LIFTER
B A
L
Type
15TL15 TLS25 TLS
Capacityton
Art. no.
151525
789170789150789250
Max. spreadmm
101016
Max. pressurebar
700700700
Combinedpump
single-actingsingle-actingsingle-acting
Amm
558
Bmm
404043
Lmm
235235342
WeightKg
448
* see price list
15 TLS SPREADER/LIFTER
15 TL SPREADER
15 TLS SET
67
BETEX®
NUTSPLITTER
Type
HNS1924HNS2432HNS3241HNS4150HNS5060
Hexagon nut range
mmM12-M16M16-M22M22-M27M27-M33M33-M39
19-2424-3232-4141-5050-60
Bolt range
1015203550
Cap. ton
206080155240
60708095106
167.2178226244269
1013152124
2530364555
4052657692
687693106125
Oil cap(cc)
Amm
Bmm
Cmm
Dmm
Emm
Fmm
WeightKg
2.13.14.28.011.5
• Compact design used in confined space with enoughforce to split rusted nuts
• All models feature a rugged one-piece cutting framecoupled to a heavy-duty hydraulic cylinder
• Specially designed "tool steel" cutter blade cuts the nutto the precise point where it cracks
• Unique angled head design to keep full contact withthe nut being penetrated
• Unique angled cutter blade with radius to have greaterresistance to cutting and breaking nuts
• 5 popular models applicable to cover the largest rangeof nut sizes
C
E
B
A
D
F
BETEX NUT SPLITTERS
Type Amm
Bmm
Cmm
Dmm
Emm
Fmm
Gmm
Hmm
Jmm
WSP 10 tonWSP 25 ton
16501630
19001880
740920
610700
225-1065268-980
120120
540620
50-490100-520
100125
Type Cap. *ton
Strokemm
Typepump
Work forcebar
Typecilinder
Weightkg
WSP10WSPA10WSPE10WSP10HDWSPA10HDWSPE10HDWSP25WSPA25WSPE25
101010101010252525
250250250250250250250250250
handair
electrichandair
electrichandair
electric
700700700700700700700700700
single actingsingle actingsingle actingsingle actingsingle actingsingle actingsingle actingsingle actingsingle acting
878890878890145146148
C
BA
D
E
F
G
H J
BETEX WSP 10 tonIdeal for mounting and dismantling jobs,like repairing motors, transmissions, removal and installation of gears, bearings and other parts.
WSP shop presses are including adaptors andaccessories to support work: V adaptor, V blockand 2 pushing adaptors.
• Robust steel frame ensures maximum stability andprevents bending.
• Multiple working positions for press bed.• Steel crossbars prevent the frame from bending when
loaded.• Includes gauge for precise control of the press force.
• Available in 2 models: 10 en 25 ton.• Single-acting and spring-return ram with 10” stroke is
horizontally moveable on head channel.• Also available with electric- or air-hydraulic pump.
WORKSHOP PRESSESBETEX WSP, professional workshop presses with hand, air or electric pump
68
*cap. up to and including 200 ton available.
BETEX WSP 25 tonIdeal for heavy duty pressing jobs, in garages, industrial work shops, for mounting and dismantling of couplings,bearings and other parts.
BETEX®
69
WORKBENCH
The Betex Mobilift
is a modern designed adjustable bench with a unique one-arm lifting principle.
The bench is mobile and stable.The use of a hydraulic pump means no cables on thework floor. All these characteristics make the Mobilift verypopular in workshops, so that it soon becomes indispensable.
The Mobilift workbenches are available in 2 types:capacity 400 or 1000 kg.
Advantages: • Very stable, therefore very suitable as a workbench.• Extra safe due to the lack of a 'scissors' movement.• Wooden worktop prevents work from slipping.• 2 lockable drawers.• Simple controls.• Promotes a good working posture!
Workbench too low, noroom for feet under theworktop.
GOED FOUT
IDEAL IN ANY WORKSHOP
RIGHT WRONG
Type/art. nr. H400/260400 H1000/261000400 kg
1500x950x620
1220x800
620
1160
Hydraulic footpump
check valve
2 casters with brake,2 rigid casters, Ø 160,
wheel width 50
6301080
500x300x100
Carrying capacity
Dimensions in lowestposition (lxwxh)
Worktop dimensions(lxw)
Working height: minimum
maximum
Height adjustment
Security devices
Base/frame
Wheel basis width: length
Tool drawers (lxwxh)(2 pcs with padlock)
(dimensions in mm)
1000 kg
1450x860x620
1220x800
670
1160
Hydraulic footpump
check valve
2 casters with brake,2 rigid casters, Ø 160,
wheel width 50
6301080
500x300x100
A correct working height androom for the feet allows for agood working posture, withback straight, the worktopclose to the body.
H 400
H 1000
BETEX MOBILIFT
BETEX®
70
SAFETY TIPS
For multiple ram lifts, you must be able to determinethe location and number of lifting points that willallow the load to be evenly distributed to all therams. This is called load balance. Size, centre of gravity and load geometry must be considered inorder to correctly determine load balance.
Every jack or ram, whether used individually or in asystem, should be completely supported on a solid,firm, non-sliding foundation capable of supportingthe load.
You must know the weight of whatyou intend to lift and choose a ramwith at least 20% more capacity. Be aware of possible load shift requiring more capacity at any particular lifting point.
1. Choose the right ram.
4. Fully support each jack or ram at its base.
2. Check each component.
5. Fill oil reservoirs with cylinder retracted.
6. Know how your hydraulics work.
7. Centre the load on the lifting point.
8. Distribute load evenly when using multiple rams.
Check each component before you set up your hydraulicsystem. Do not use damaged or worn components. Turn them in for repair or replacement.
3. Safety instructions.
Read all warning labels and instructions. Operating instructions must be understood before using equipment.Never remove labels from equipment. Replace missing,worn or damaged labels. Always wear safety goggles andprotective clothing when using hydraulic equipment.
Only fill pump to recommended level; only fill when connected cylinder is fully retracted.
Do not use extensions or cheater bars on hydraulic jacks or hand pumps to raise a load.
The load must be centred on the ram, or equally distributed on multiple rams. Off-centre loading can result in the ram slipping out and loss of the load.
BETEX®
71
BETEX®
SAFETY TIPS
12. Avoid extreme heat or weld splatter.Weld splatter will damage plunger rods and hoses. Hydraulicfluid can ignite if vaporized or exposed to high temperatures.
9. Block or crib load as it rises. 13. Disconnecting the hydraulics.
Place blocking or cribbing under the load as you raise it.Each time you raise it higher, insert more blocking. Positionyourself in a manner that will keep you clear of the load,and will not allow your hands or other body parts betweenthe load and the cribbing.
10. Do not use rams as permanent supports.Hydraulic rams are not meant to be used as permanentsupports, but are designed to lift and lower. If you need tohold the load for any length of time, cribbing or Betexlocknut cylinders should be used.
Dragging or carrying rams or pumps by a connectedhose can damage the couplers and hoses. Using damaged couplers and hoses can be dangerous.
15. Keep hydraulic hoses free of obstructions.
11. Connecting the hydraulics.When making connections with quick couplers, make surethe couplings are fully engaged. Threaded connections,such as fittings, gauges, etc., must be securely tightenedand leak free. Never use excessive tightening force thatmay distort the fittings or strip the thread profile.
Never attempt to disconnect hydraulic hoses, fittings orcouplers under pressure. Unload the ram, open the release screw on the hand pump and shift or open all hydraulic controls several times. If system includes agauge, double check the gauge to ensure pressure hasbeen completely released.
14. Do not carry or drag pumps and rams by their hoses.
Do not drop sharp or heavy objects on hose. Keephose out of heavy traffic areas. Avoid internal da-mage to hose wire strands. Applying pressure to adamaged hose may cause it to rupture. Avoid sharpbends and kinks when routing hydraulic hoses.
For safe, precise and quick mounting of bearings,bushings, sealing rings, cam wheels and pulleysthe use of an Impact fitting tool set is an absolutenecessity.
Specially for bearings it is important that duringmechanical mounting the bearing is supported onits inner and outer ring in order to avoid unnecessary damage and premature failure.
In this way mounting forces are not transmitted via balls or rollers of the bearings and hence theraceways are not damaged.
IMPACT 33• with 33 rings, suitable for +/- 375 bearings.
BETEX®
FITTING TOOL SETBETEX IMPACT 33
Your benefits:• Quick, precise and safe mounting• No more damage to shafts, bearing houses or
sealing rings• Extended life cycle of bearings• The impact resistant plastic collets are made of
unbreakable sheet material, contrary to easilybreaking injection moulded collets.
• The collet numbers are clearly engraved andmarked, to avoid mistakes.
72
By using the impact resistant plastic collets, madeof unbreakable sheet material(instead of easily breaking injection moulded col-lets), metal to metal contact is avoidedand also damaging of the shaft.The sets can be used for bore diameters of 10 to60 mm or parts thereof. Impact is also suitable forsafe, precise and quick mounting of other machineparts, like bushings, sealing rings, cam wheels andpulleys.
IMPACT 39• with 39 rings, suitable for ± 600 bearings.
BETEX®
FITTING TOOL SETBETEX IMPACT 39
73
Collets are marked clearly in order toavoid mistakes.
Impact 33 39Collet bore mm 10-50 10-60Collet OD mm 26-110 26-130Sleeve bore mm 32, 52 18, 32, 52, 62Hammer 0.7 kg, absorbs shocks
and vibrationsWeight kg 4,8 6,5
BETEX®
Bega develops, manufactures and sells worldwide awide range of BETEX® induction heaters for professional use in industry and industrial services.
DEPENDABLE QUALITY BETEX® induction heaters are proven to be reliable.Their sturdy styling and user-friendly design guaranteessustained, problem-free operation in an industrial environment. Our Standard series heaters are low frequency (50/60Hz). We also make use of the medium frequency (< 20kHz) principle for combined mounting and dismounting applications.
SERVICE & WARRANTYOur expertise and experience ensure quality, reliability, professional advice and outstanding service. BETEX®
induction heaters are supplied with clear instructions and a 3-year warranty on the electronic components.
WHY USE INDUCTION HEATING?Induction heating is a superior, fast and controlled heatingmethod.It is a safe and environmentally-friendly alternative to tradi-tional heating methods such as ovens, oil baths or blowtorches. These methods generate smoke, fumes or oilwaste and are hazardous for personal health and safety.
ENERGY EFFICIENTAll Betex® induction heaters are energy efficient in comparison with classic methods. The advantage of theTURBO series over the Standard series is that larger components can be heated in a relatively short time while consuming the same amount of energy.
FOR BEARINGS AND OTHER COMPONENTSBETEX® induction heaters are versatile and can be usedfor the heating of gear wheels, bushes, couplings, etc. It is common knowledge that a correct mounting method extends bearing life. Even, tension-free heating preventsunnecessary damage and retains original lubrication. Induction heaters are ideal for sealed (2RS-ZZ) and pre-lubricated bearings.
SAFE AND CONTROLLED HEATINGDigital electronics ensure optimum control during the heating process. These automatically regulate the most efficient use of power and ensure even and rapid heating.No extra steps are necessary. This prevents explosive heating (no discolouration or pitting of material).
DEMAGNETISATIONFail-safe demagnetisation is essential for bearings andtransmission parts.The proven quality of BETEX® induction heaters guarantees maximum demagnetisation (< 2A/cm). This has a major positive effect on the life span of bearings, gears, etc.
OUR RANGE INCLUDES• Standard series - up to 100 kVA• TURBO series - up to 100 kVA• Custom-made to client's requirements.• Medium frequency for mounting & dismounting
74
INDUCTION HEATERS
ADVANTAGES OF BETEX® INDUCTION HEATERS� Robust design for working in industrial environments.
� Evenly distributed heating: the microprocessor con-trolled electronics prevent overheating and explosiveheating.
� The energy saving alternative to traditional methods.
� For sealed (2RS-ZZ) and pre-lubricated bearings.
� Automatic power reduction.
� Automatic demagnetisation to <2A/cm.
� Unique, user-friendly swivel-arm construction.
� Suitable for continuous use (24/7).
� Large selection from STANDARD and TURBO series, from 3.6 to 100 kVA.
� TURBO models are energy efficient.
� Portable models for on-site works.
� 3 year warranty.
� Meets CE and IEC requirements.
� Certified by TUV to CSA (Canada) and UL (USA) standard.
� Practical solutions based on more than 30 years ofexperience.
TÜV Rheinland Group
BETEX MF Quick-heater
75
BETEX®
3,6kVA
3,6kVA
8kVA
Betex 22 ELD portable
Min. Ø 10 mmMax. OD: 240 mmFor bearings up to ±15 kg
Betex 24 RLD TURBOportable
Min. Ø 10 mmMax. OD: 350 mmFor bearings up to ±40 kg
Standard serie TURBO serie
Betex 22 ESD
Min. Ø 15 mmMax. OD: 340 mmFor bearings up to ±40 kg
Betex 24 RSD TURBO
Min. Ø 15 mmMax. OD: 520 mmFor bearings up to ±95 kg
Betex 38 ESD
Min. Ø 30 mmMax. OD: 480 mmFor bearings up to ±125 kg
Betex 40 RSD TURBO
Min. Ø 30 mmMax. OD: 790 mmFor bearings up to ±350 kg
12kVA
Betex 38 ZFD
Min. Ø 30 mmMax. OD: 720 mmFor bearings up to ±280 kg
Betex 40 RMD TURBO
Min. Ø 60 mmMax. OD: 920 mmFor bearings up to ±600 kg
24kVA
Betex SUPER
Min. Ø 60 mmMax. OD: 1300 mmFor bearings up to ±600 kg
Betex SUPER TURBO
Min. Ø 175 mmMax. OD: 1700 mmFor bearings up to ±1200 kg
40-48-100 kVA
Betex GIANT
Min. Ø 85 mmMax. OD: 1400-2500 mmFor bearings from ±1500 upto ±3500 kg
Betex GIANT TURBO
Min. Ø 115 mmMax. OD: 1400-2500 mmFor bearings from ± 500 up to ±12000 kg
For more information order our BETEX Induction heater catalogor visit our website: www.bega.nl
Your advantages:• You have the right size available for immediate use• The shims have been smoothed and have no burrs• Precise machine alignment helps you get the best
machine performance• Stock control is now simpler and easier to verify• Now also available in 2 and 3 mm thickness!
76
Case E
Case ABCD
BETEX SOLID STAINLESS STEEL SHIMSPre-cut shims for fast, simple and precise machine alignment.
• Available in 6 difference sizes and 11 thicknesses!• Packed in sets of 10 shims• High-quality, non-corroding material• The shim's thickness is etched on each shim.• Suitable for re-use• 31 standard combinations in handy carrying cases
BETEX®
Number of Shims per series / case in various sizes
Thickness: 0.025 0.05 0.10 0.20 0.25 0.40 0.50 0.70 1.00 2.00 3.00Art. No. Case type:B020210 AB 10/9 10 10 10 10 10 10 10 10 10 180B020230 AB 10/10 10 10 10 10 10 10 10 10 5 5 180B020240 AB 10/11 10 10 10 10 10 10 10 10 10 5 5 200 B020220 AB 20/9 20 20 20 20 20 20 20 20 10 340 B020250 AB 20/10 20 20 20 20 20 20 20 10 5 5 320 B020260 AB 20/11 20 20 20 20 20 20 20 20 10 5 5 360 B020310 BC 10/9 10 10 10 10 10 10 10 10 10 180 B020330 BC 10/10 10 10 10 10 10 10 10 10 5 5 180 B020340 BC 10/11 10 10 10 10 10 10 10 10 10 5 5 200 B020320 BC 20/9 20 20 20 20 20 20 20 20 10 340 B020350 BC 20/10 20 20 20 20 20 20 20 10 5 5 320 B020360 BC 20/11 20 20 20 20 20 20 20 20 10 5 5 360 B020410 CD 10/9 10 10 10 10 10 10 10 10 10 180 B020430 CD 10/10 10 10 10 10 10 10 10 10 5 5 180 B020440 CD 10/11 10 10 10 10 10 10 10 10 10 5 5 200 B020420 CD 20/9 20 20 20 20 20 20 20 20 10 340 B020450 CD 20/10 20 20 20 20 20 20 20 10 5 5 320 B020460 CD 20/11 20 20 20 20 20 20 20 20 10 5 5 360 B020110 ABC 10/9 10 10 10 10 10 10 10 10 10 270 B020100 ABC 10/10 10 10 10 10 10 10 10 10 5 5 270 B020140 ABC 10/11 10 10 10 10 10 10 10 10 10 5 5 300 B020120 ABC 20/9 20 20 20 20 20 20 20 20 10 510 B020130 ABC 20/10 20 20 20 20 20 20 20 10 5 5 480 B020150 ABC 20/11 20 20 20 20 20 20 20 20 10 5 5 540 B020019 ABCD 10/9 10 10 10 10 10 10 10 10 10 360 B020030 ABCD 10/10 10 10 10 10 10 10 10 10 5 5 360 B020040 ABCD 10/11 10 10 10 10 10 10 10 10 10 5 5 400 B020029 ABCD 20/9 20 20 20 20 20 20 20 20 10 680 B020031 ABCD 20/10 20 20 20 20 20 20 20 10 5 5 640 B020032 ABCD 20/11 20 20 20 20 20 20 20 20 10 5 5 720 B020600 E 10/10 10 10 10 10 10 10 10 10 5 5 90
31 standard combinations in handy carrying case (other combinations on request)
Total per
case
SHIMS
Case ABC
MINI
A
B
C
D
E
B-035-005MnB-035-010MpB-035-020MrB-035-025MsB-035-040MtB-035-050MuB-035-070MvB-035-100MwB-050-0025AkB-050-005AnB-050-010ApB-050-020ArB-050-025AsB-050-040AtB-050-050AuB-050-070AvB-050-100AwB-050-200AxB-050-300AyB-075-0025BkB-075-005BnB-075-010BpB-075-020BrB-075-025BsB-075-040BtB-075-050BuB-075-070BvB-075-100BwB-075-200BxB-075-300ByB-100-0025CkB-100-005CnB-100-010CpB-100-020CrB-100-025CsB-100-040CtB-100-050CuB-100-070CvB-100-100CwB-100-200CxB-100-300CyB-125-0025DkB-125-005DnB-125-010DpB-125-020DrB-125-025DsB-125-040DtB-125-050DuB-125-070DvB-125-100DwB-125-200DxB-125-300DyB-200-005EnB-200-010EpB-200-020ErB-200-025EsB-200-040EtB-200-050EuB-200-070EvB-200-100EwB-200-200ExB-200-300Ey
BETEX®
Art.no. package A B C size bolt size1010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010
35mm35mm35mm35mm35mm35mm35mm35mm50mm50mm50mm50mm50mm50mm50mm50mm50mm50mm50mm75mm75mm75mm75mm75mm75mm75mm75mm75mm75mm75mm100mm100mm100mm100mm100mm100mm100mm100mm100mm100mm100mm125mm125mm125mm125mm125mm125mm125mm125mm125mm125mm125mm200mm200mm200mm200mm200mm200mm200mm200mm200mm200mm
30mm30mm30mm30mm30mm30mm30mm30mm50mm50mm50mm50mm50mm50mm50mm50mm50mm50mm50mm75mm75mm75mm75mm75mm75mm75mm75mm75mm75mm75mm100mm100mm100mm100mm100mm100mm100mm100mm100mm100mm100mm125mm125mm125mm125mm125mm125mm125mm125mm125mm125mm125mm200mm200mm200mm200mm200mm200mm200mm200mm200mm200mm
9mm9mm9mm9mm9mm9mm9mm9mm13mm13mm13mm13mm13mm13mm13mm13mm13mm13mm13mm21mm21mm21mm21mm21mm21mm21mm21mm21mm21mm21mm32mm32mm32mm32mm32mm32mm32mm32mm32mm32mm32mm45mm45mm45mm45mm45mm45mm45mm45mm45mm45mm45mm55mm55mm55mm55mm55mm55mm55mm55mm55mm55mm
0,05mm0,10mm0,20mm0,25mm0,40mm0,50mm0,70mm1,00mm0,025mm0,05mm0,10mm0,20mm0,25mm0,40mm0,50mm0,70mm1,00mm2,00mm3,00mm0,025mm0,05mm0,10mm0,20mm0,25mm0,40mm0,50mm0,70mm1,00mm2,00mm3,00mm0,025mm0,05mm0,10mm0,20mm0,25mm0,40mm0,50mm0,70mm1,00mm2,00mm3,00mm0,025mm0,05mm0,10mm0,20mm0,25mm0,40mm0,50mm0,70mm1,00mm2,00mm3,00mm0,05mm0,10mm0,20mm0,25mm0,40mm0,50mm0,70mm1,00mm2,00mm3,00mm
M8M8M8M8M8M8M8M8M12M12M12M12M12M12M12M12M12M12M12M20M20M20M20M20M20M20M20M20M20M20M30M30M30M30M30M30M30M30M30M30M30M42M42M42M42M42M42M42M42M42M42M42M52M52M52M52M52M52M52M52M52M52
Sizes of peel-off shims
Art.no. package size bolt size812500581250281250358125048125045
1010101010
35x35mm50x50mm75x75mm
100x100mm125x125mm
M8M12M20M30M42
77
PEEL-OFF (HARD BRASS SHIMS) MS-63• The peel-off shims are 1 mm thick and are available in
5 sizes. They consist of 12 peel-off layers (8x0.1 mm and4x0.05 mm).
• They always fit! Simply peel off until the right thickness isobtained.
SIZES OF SOLID SHIMS (AISI 304, DIN 1.4301)
BETEX®
SHAFT ALIGNMENT COMPUTERS
78
FIXTURELASER DIRIGO The Fixturelaser Dirigo puts laser alignment accuracy within reach of everyone! The ergonomically designed control unit fits comfortable in one hand. The live displaymeans that you will get instant feedback when shimming ormoving the machines. This eliminates the guesswork andback and forth you’re suffering through now. All this at anaffordable price that means a really quick payback.
Fast, Easy, PreciseThe Fixturelaser Dirigo features an unique “laser line” instead of the traditional laser dot. This makes setup andalignment much easier, as the line is wide and is easilyprojected to the laser detector.
An easy to use and payable laser align system with push-buttons for the alignment of horizontal mounted machines. • Horizontal shaft alignement• Easy to use• Wide laserbeams• Packaged brackets• Measuring distance: max. 1 meter
The Fixturelaser is inclusive:Display unit2 measuring units with spirit levels2 mechanical shaft fixtures2 locking chains2 extension chainsMeasuring tapeInstruction for useCertificate of calibrationSet of alignment reportsCarrying case
79
EASY-LASER E420 AND E530 SHAFT ALIGNMENT SYSTEMEASY-LASER® E420Easy-Laser® is used to align pumps and motors for all typesof installations in a variety of industries. Correctly set-up andaligned machines are necessary to reduce energy consumption and achieve optimum service life. Easy-Laser®
E420 sets a new standard in entry level laser systems forshaft alignment. Wireless measuring units, a large 5.7” colour display and an IP65-rated design that withstandsharsh environments. These are the features you would normally only find in more expensive systems! Simply put, Easy-Laser® E420 has everything an entry levelsystem should have, and more. Take the next step into wireless freedom!Easy-Laser® is also used to align generators and gearboxesin wind turbines of a number of sizes and makes. Special brackets are available for alignment with locked rotors to increases the safety of the operator.
What you can measure and align:Horizontal machines: horizontally mounted machinesoften consist of a pump and a motor, but can also includeother types of machines such as gearboxes and compressors.Regardless of the machine type, it is easy to measure andalign with Easy-Laser® E420.Vertical/flange-mounted machines: this program is usedfor alignment of vertical and flange-mounted machines, e.g.pumps, motors, gear boxes. Shows centre offset, angularerror and shim value at each bolt.
BETEX®
EASY-LASER® E530Easy-Laser® is a cost effective investment that will pay itselfback quickly by eliminating unplanned downtime, and reducingenergy consumption and the need for spare parts. Simply efficient!
Optimize operating conditionsEasy-Laser® E530 is a precise and competent alignment system for your rotating machinery. Easy-Laser® E530provides the ideal balance between performance and price allowing you to create the best conditions to operate your machinery economically and problem-free: • Alignment of horizontal aswell vertical/flange mounted
machines (pumps, motors, gear boxes compressors, etc)• Keep track of machinery status with vibration level check*. • Check the prerequisites for a correct alignment before
aligning, e.g. bearing play and soft foot. • Measure and align in three easy steps. • Document the result.
Advantages E420 and E530:• Easy to learn and to use. • Compact measuring units for use on most machine
designs. • All wireless units (Built-in Bluetooth® technology and
integrated rechargeable battery). • Large, easy to read 5.7” colour display. • Programs with both symbols and text = easy to
understand. • TruePSD technology with unlimited resolution. • Dual PSD, dual laser beams and dual inclinometers for
superior control and accuracy.
• 3 year warranty gives assurance. • Fast service and support. 48-hours Express service
if necessary. • Low overall costs during the entire lifecycle of the
product, for example calibration, accessories, etc
Extra E530:• Produce PDF reports directly from the Display unit and
save to USB memory. • Expandable / Adaptable. A range of accessories means
that you can adapt the measurement system to yourneeds, now and in the future.
80
BTA EX EASY-LASER D90 PULLEY ALIGNMENT LASERWhy the Easy-Laser BTA models?• The BTA fits all types of chain and belt drives • Not only V-belts, but also flat and toothed belts• Shows both angular and parallel errors together• Can be used on both horizontally and vertically mounted machines• Pulley alignment can now be done by one person• The simplicity of the design makes training unnecessary• Laser-technology is faster and more precise than conventional alignment
methods• Now also available in Atex/EX version (D130)
Specifications:Measurements (bxdxh) : 145 x 86 x 30 mmMaterial : ABS plasticWeight : 270 gramSchijfdiameters : from diameter 60 mm and biggerMeasuremetn distance : max. 10 meter
BTA EASY LASER D130 ATEX/EXBega has been supplying laser-optic aligning equipment for shaft alignment andgeometric measurement since the early nineties. Recently, Bega has added theBTA Easy Laser Compact to its range.
• The BTA fits all types of chain and belt drives• Not only V-belts, but also flat and toothed belts• Intrinsically safe and approved for use in potentially explosive environments.• Shows both angular and parallel misalignment between the sheaves• Can be used on both horizontally and vertically mounted machines• Pulley alignment can be made by one operator• Laser-technology is faster and more precise than conventional alignment
methods
Specifications:Dimensions (wxdxh) : 145 x 86 x 30 mmMaterial : ABS plasticWeight : 270 gramsSheave diameters : 60 mm diameter and largerOperating range : maximum 10 metres
BTA EASY LASER D160 DIGITALBTA Digital Easy-Laser D160 pulley alignment laserTransmitter dimensions (wxdxh) :145 x 86 x 30 mm - 270 gramsReceiver dimensions (wxdxh) :95 x 95 x 35 mm - 170 gramsDisplay dimensions (wxdxh) :78 x 120 x 23 mm - 170 gramsMaterial :ABS plastic / anodised aluminiumSheave diameters :60 mm diameter and largerOperating range :maximum 3 metres digital (10 metres
with targets)
Parallel and angular errors between the sheaves are given with digitalprecision on the receiver.
The laser is supplied complete with:Separate backlit display1 measuring cable, length 2 metres, with push/pull connectors2 magnetic targets, adjustable from -4 to +4 mm2 AA 1.5V Penlight and 9V Block batteries (1 reserve set)Plastic case with foam insert and manual
BETEX®
PULLEY ALIGNMENT COMPUTERS
BETEX®
PULLEY ALIGNMENT COMPUTERS
81
PAT PULLEY ALIGNMENT LASERThe PAT pulley alignment laser is the definitive solution forall your pulley alignment jobs!
Because the belts' grooves are used as reference points,you can see instantly whether the pulleys are correctly aligned or not.The PAT is supplied with two spring-loaded laser units that can be mounted in the pulley grooves.The PAT also has standard tapers allowing the lasers to be mounted on most standard gauges. (A-E 6 mm - 40 mm) Other gauges are available as accessories.
The use of two laser units makes it very easy for the userto determine the adjustment required, e.g. whether to correct a parallel error or an angular error.
You can see in no time whether your pulleys are correctlyaligned. Alignment is just as easy as mounting the laserunits. Simply switch on the lasers and view the laser unit on the other pulley.The laser projects a line on the upper surface of the opposing laser unit, mounted on the 'target' as shown tothe left. If required, the machine can be aligned in such away that the laser on both units hits the 'target'.
Specifications:Material : anodised aluminiumDimentions : 61 x 76 x 60 mm (lxhxw)Weight : 0,64 kgBattery type : (2) AAA batteriesOperating range : from 15,2 mm till 609,6mmLaser : class 2Pulley diameters :76 mm and bigger