www.jet-professional.com

258

27 2727 27

BD-405 MINI LATHE

BD-712 METAL LATHE

Model BD-405Swing over bed 110 mm

Distance between centers 125 mm

Hole through spindle 10 mm

Tailstock screw M14x1 mm

Variable speed 100-3800 ±10% rpm

Cross slide travel 50 mm

Motor output power 150 W

Overall dimension (LxWxH) 440x270x210 mm

Packing Size (LxWxH) 510x380x310 mm

Weight (Net/Gross) 14/16 kg

• Constructed with cast iron giving great rigidity• Precision ground Vee bed slide ways• Fully featured saddle and carriage assembly including powered lead screw• 250W motor with variable speed and a 2 speed gearbox• Change wheel set providing thread cutting selections between 0.4-2.0mm & 12-52 tpi

Model BD-712Swing over bed 180 mm

Distance between centers  300 mm

Hole through spindle 20 mm

Cross slide travel 65 mm

Compound travel 55 mm

Spindle taper MT3

Tailstock taper MT2

Spindle speed  Low range 100-1100 ±10% rpm

High range 100-2500 ±10% rpm

Motor output power 250 W

Range of threads  Metric  version 0.4-2.0 mm (10 thread pitches)

Imperial version 12-52 TPI (18 thread pitches)

Overall dimension(LxWxH)  700x300x300 mm

Weight(Net/Gross)              37/40 kg

Packing size (LxWxH)         790x360x390 mm

 Cast iron with ground, hardened slideways• Belt driven, with variable speed• 50mm self-centring 3 jaw scroll chuck• Chuck guard with a safety interlock• Supplied with 50mm 3 jaw chuck, wrench set and oil can

D019542_Jet_Catalog 27 (258-264)258 258 7/1/2015 12:52:04 PM

27 27

www.yato-professional.com

259

27 27

BD-714 METAL LATHE

BD-1230 METAL LATHE

Model BD-714Swing over bed 180 mmCross slide travel 65 mmCompound travel 55mmMotor output power 350 WDistance between centers 350 mmHole through spindle 20 mmSpindle taper MT3Tailstock taper MT2Spindle speed - Low range 100-1200 ±10% rpm - High range 100-3000 ±10% rpmThread of range - Metric version 0.4-2.0 mm (10 threads pitches) - Imperial version 12-52 TPI (18 threads pitches)Overall dimension (LxWxH) 800x300x300 mmWeight (Net/Gross) 44/50 kgPacking Size (LxWxH) 870x340x380 mm

Model BD-1230Swing over bed    280 mm

Distance between centers 600/750 mm

Hole through spindle 25 mm

Spindle taper MT4

Tailstock taper MT2

Spindle speed (6 steps) 125—2000 rpm

Compound travel 80 mm

Cross slide travel 155 mm

Range of thread  Metric version 0.25 - 2 .5 mm (14 threads pitches)

Imperial version 12 - 96 TPI (9 threads pitches)

Motor output power (brushless motor)1500 W

Overall dimension (LxWxH) 1500x750x1550 mm

 Packing size  (LxWxH)       1550x890x1600 mm

Weight  (Net/Gross)            310/350 kg

D019542_Jet_Catalog 27 (258-264)259 259 7/1/2015 12:52:07 PM

www.jet-professional.com

260

27 2727 27

Combination, drilling, milling & turning machine

Mini metal lathe

Model no. JMP250V JMP280V

Distance between centre 550/750mm 700mmSwing over bed 250mm 280mmSwing over cross slide 145mm 165mmWidth of bed 135mm 180mmTaper of spindle bore MT4 MT4Spindle stroke 26mm 26mmRange of spindle speeds 50-2000rprn 50-2000rpmRange of longitudinal feeds 0.07-0.20mm/r 0.07-0.20mm/rRange of inch threads 8-56T.P.I 8-56T.P.1Range of metric threads 0.4-3.5mm 0.4-3.5mmTravel of top slide 50mm 70mmTravel of cross slide 115mm 140mmTail stock sleeve travel 50mm 70mmTaper hole of tail stock quill MT2 MT2Motor 750w 1.1 kwDrilling & MillingTaper of spindle bore MT2 MT2Spindle stroke 50mm 50mmRange of spindle speeds 50-2250rpm 50-2250rpmMax. Distance spindle to table 280mm 375mmMax. Distance spindle to column 170mm 185mmMotor 500W 600WPacking size 1270/1520 x 670 x 930mm 1400 x 780 x 1070mmNet weight 180/195kg 230kg

Standard accessories:3-jaw chuck, 4-way tool post, chuck guard, splash guard, chip tray,

variable speed DRO for lathe speed, mill speed and mill quill.

Optional accessories: Steady rest, follow rest, face plate, back plate, 4-jaw chuck,

ER25 collets chuck, collets holder, lead-screw cover, tool post cover,turning tools threating dial, machine stand.

FEATURES: • Most popular, widely useful combination machine. • V-way bed is hardened and precision ground. • Adjustable height head gets greater capacity. • MT4 spindle hole gets greater capacity. • Spindle is supported by high precision bearing. • T-slot cross slide. • Power longitudinal feed allows threading. • Adjustable gibs for the slideway. • Close gearbox gets left and right hand threads to cut. • Spindle feeding handle with softgrip for perfect opration. • Tailstock may be offset for turning taper. • Geared mill head gets more power. • Tolerance test certificate, test flow chart included.

Model no. JML 250V JML 280VDistance between certer 550mrn 700mmSwing over bed 2500151 280mmSwing over cross slide 145mm 165mmWidth of bed 135mm 180mmTaper of spindle bore MT4 MT4Spindle stroke 26mm 26mmRange of spindle speeds 50-2000,m 50-2000,Range of longitudinal feeds 0.07-0.20mm/1 0.07-0.20mm/1Range of inch threads 8-56T.P.I 8-56T.P.1Range of metric threads 0.4-3.501111 0.4-3.50101Top slide travel 50mm 80mmCross travel 115mm 140mmTail stock quill travel 70mm 80mmTaper of tail stock quill MT2 MT2Motor 550W 0.75/1.1 KWPacking size 1150/1350 x 560 0 570nvn 1400 x 700 x 680mmNet weight 120kg 190kg

D019542_Jet_Catalog 27 (258-264)260 260 7/1/2015 12:52:10 PM

27 27

www.yato-professional.com

261

27 27

Combination, drilling, milling & turning machine

JMP500 JMP800Swing over b.Distance between centres 500mm 800mmMax. longitudinal travel 440mm 740mmMax. cross travelTaper of spindleSpindle holeStep of spindle speedRange of spindle speedBarrel travelBarrel taperMetric thread rangeInch thread rangeLongitude range ofautomatic feedingCross range of automatic feedingMax. drilling capacityWorktable size (L X W)Max. end millMax. face millDistance between spindle certer and columnDistance between spindle and worktableHeadstock travel of up and downSpindle taperStep of spindle speedsRange of spindle speedsSwivel degree of headstock

MOTOR Motor powerPacking size 1130x580x1100mm 1430x580x1100mmN. weight/G. weight 245kg/280kg 275kg/325kgLoading amount 40pcs/20° container 32pcs/20.container

Model No.

TURNING

Ø420mm

200mmM.T.4

Ø28mm7

160-1360r.p.m70mm

0.05-0.35MM 0.002-0.014”

DRILLING & MILLING

Ø22mm475x160mm

Ø28mmØ80mm

M.T.30.2-6mm

4-120T.P.I0.05-0.35MM 0.002-0.014”

±360°0.55kw

SHIPMENT DATA

285mm306mm110mmM.T.3

16120-3000r.p.m

• Compact, versatile combination machine. • Adjustable height drill/mill head increases capacity.

• Large MT4 spindle bore. • Fine feed handle and clutch for precision milling. • Headstock provides two step of feeds.

• Spindle is supported by high precision bearing. • Headstock is constantly oiled during operation.T-slot cross slide.Adjustable gibs for the slideway.

• Power longitudinal & cross feed. • Right & left hand threads cutting is available. • High precision chuck. Equipped with emergency stop button. • Tailstock may be offset for turning taper.

D019542_Jet_Catalog 27 (258-264)261 261 7/1/2015 12:52:12 PM

www.jet-professional.com

262

27 2727 27

GH-1440W Metal lathe

GH-1440Z Metal Lathe

FEATURE: • Induction hardened, precision ground V-way bed.• 52mm spindle bore, D1 4 spindle is supported by high quality tapered roller bearing.• Hardened, precision ground gears in headstock. Cast iron machine stand.• High precision directly mounting chuck.• Carriage mounted spindle control lever.• Automatic feed and threading are fully interlocked.• Tailstock may be offset for turning tapers.• Tolerance test certificate, test flow chart included

Standard Accessories Optional Accessories 3-jaw chuck (160mm) Quick change tool post 4-jaw chuck (200mm) Turning tools Face plate (250mm) Leadscrew cover Steady rest Chuck guard Follow rest Tool post cover Splash guard Digital readout system Stand & oil tray Taper turning

attachment Micro carriage stop Collet attachment Halogen work lamp Toolbox & tools Coolant system Foot brake

Model GH-1440WSwing over bed 356 mm (max. 508 mm)Diameter over transverse slide 216 mmCenter distance 1015 mmCenter height 178 mmHeadstock MT-5Spindle port: Camlock DIN 55029 D1-4Spindle passage 38 mmMax. tool size 16 x 16 mmTransverse slide travel 162 mmCompound rest travel 89 mmSpeeds: 12 40–1800 rpmTailstock ram travel 120 mmTailstock taper MT-3Feed rate: 48 0.04–0.6 mm/rMetric threads: 22 0.4–7 mm/rInch threads: 28 4–56 TPICapacity of steady rest 95 mmCapacity of follow rest 70 mmDimension (LxWxH) 1873 x 750 x 1200 mmWidth of lathe bed 267 mmMotor power output 3 HP / S1 100%Motor power input 5.7 HP / S6 40%Weight 995 kg

Induction-hardened and ground cast iron gantry bedGear box makes it possible to cut a number of threadswithout changing the gearsPermanently lubricated main, feed and clutch gearHardened and ground gears in headstock and gear boxStandard inch and metric graduationGuides adjustable without play via V-ledgesMax. slide reversal clearance 0.1 mmTransversal adjustment of tailstock for taper cutsTailstock sleeve and hand wheel with adjustableprecision scaleAdjustable feed clutchTouch control operation

Chuck guard with limit switchLongitudinal stop with fine adjustmentThreading dialOperating tools in tool boxWith 3-Axis Digital Readout

Model No. GH-1440K (GH-1440C)

Distance between centres 1000mm (40”)Swing over bed 356mm (14”)Swing over cross slide 220mm (8-5/8”)Swing over gap 506 mm (20”)Bed width 206mm (8-1/9”)Taper of spindle bore MT5Spindle nose D1-4Spindle bore 52mm(2-2/5”)Step of spindle speeds 8 or 16 stepsRange of spindle speeds 90 or 45-1800 rpm

(42) 0.015-0.220 mm/rev(40) 0.076-02.054 mm/rev(42) 0.0006-0.0087 in/rev(40) 0.0003-0.010 in/rev(42) 0.043-0.653 mm/rev

(40) 0.0304-0.746 mm/rev(42) 0.0017-0.0257 in/rev(40) 0.012-0.0294 in/rev

Whitworth threads range (28) 4-56 T.P.I (40) 4-112 T.P.IRange of metric threads (37) 0.4-7mmPitch and diameter of leadscrew 4mm 8T.P.IDia. Of tailstock quill 45 mm (1-25/32”)Top slide travel 92 mm (3-5/8”)Cross slide travel 178 mm (7”)Carriage travel 840mm (33”)Travel of tailstock quill 115 mm (4-1/2”）Taper of tailstock quill MT3Main motor 1.5/2.2 Kw 3.3 HPPacking size 1920 X 760 X 1450 mmNet weight 800kg

Range of cross feeds

Range of longitudinal feeds

D019542_Jet_Catalog 27 (258-264)262 262 7/1/2015 12:52:15 PM

27 27

www.yato-professional.com

263

27 27

Heavy duty metal lathe

Model GH2060C / GH2080C /

GH20120C GH2260C / GH2280C /

GH22120C Swing over bed 510mm (20”) 560 (22”) Swing in gap 300mm (11-7/8”) 350mm （13-3/4“） Swing of gap 200mm (8”) Distance between centers 1500mm (60”) 2000mm (78”) 3000mm (118”) Center height 1135mm 1160mm width of bed 350mm(13-3/4”) HEADSHIOK Spindle nose D1-8 Spindle bore 80mm (3-1/8”) Taper of spindle bore No.6 Morse RAnge of spindle speeds 12 Changes, 25-1600 r/min Max. travel of top slides 130mm (5-1/8”) Leadscrew pith 6mm or 4 T.P.I Max. section tools 25 X 25mm (1 “ x 1”) Longitudinal feeds range 35 kinds 0.059 -1646mm/rev (0.0022”-0.612”/rev) Cross feeds range 35 kinds 0.020 -0.573mm/rav (0.00048”-0.01354”) Metric threads range 47 kinds 0.1-14mm Inch threads range 60 kinds 2-112 T.P.I Diametrical pitches range 50 kinds 4-112DP Module pitches range 34 kinds 0.1-7MP Dia. Of tailstock sleeve 75mm （3”） Travel of tailsock sleeve 180mm (7”) Morse taper of tailstock sleeve No.5 Morse Cross adjustment ± 13mm (± 1/2”) Power of main motor 7.5Kw (10HP ), 3HP Power of coolant pump 0.1Kw (1/8HP), 3HP Overall Dimension L X W X H

290 X 112 X143 340 X 112 X 143 290 X 112 X 146

340 X 112 X 143

Packing size （L X W X H )cm

296 X 113 X 182 346 X 113 X 182 296 X113 X 162

346 X 113 X 162

Net weight/Gross weight kg

2335/2700 2685/3070 2370/2740 2720/3110

STANDARD ACCESSORIES

1 Three Jaw Chuck and Adapter 2 Four Jaw Chuck and Adapter 3 Face Plates 4 Steady Rest 5 Follow Rest 6 Oil Gun 7 Thread Chasing Dial 8 Operation Manual 9 One set of Wrenches 10 MT 7/5 Sleeve and MT 5 Center 11 Brake System 12 Coolant System

1 Driving Plate 2 Quick Change Tool Post 3 Taper Turning Attachment 4 DRO 5 Work Light 6 Lathe Turning cutter tools 7 Lathe post tool grinder

Induction-hardened and ground cast iron gantry bedPull-out bed gap sectionGear box makes it possible to cut a number of threadswithout changing the gearsPermanently lubricated main, feed and apron gearSpindle jog control, right/lefthand operationHardened and ground gears in headstock and gear boxGuides adjustable without play via V-ledgesCarriage guide Turcite-B coatedCentral lubrication for carriageAdjustable feed clutchTransversal adjustment of tailstock for taper cutsTailstock sleeve and hand wheel with adjustable precision scale

D019542_Jet_Catalog 27 (258-264)263 263 7/1/2015 12:52:19 PM

www.jet-professional.com

264

27 27

Heavy duty metal lathe

MODEL JCNC-5042 JCNC-5037 JCNC-3625B JCNC-

3625A Max.swing over bed 500mm 360mm

Max.cutting dia. for disc parts 420mm 370mm 250mm

Max.cutting dia. for axle parts 250mm 150mm

Max. cross travel (X) 220mm 150mm

Max. longitudinal ravel (Z) 550mm 500mm 320mm

Spindle bore 65 mm 56 mm 38 mm Spindle nose A2-6 A2-5 Spindle speed (Max. ) 4000 r/min 6000 r/min 4000

r/min Hydraulic chuck dia. 8" 6"

Rapid feed for X axis 12m/min 12m/min 10m/min

Rapid feed for Z axis 20m/min 20m/min 16m/min

Number of tool post 12 (Hydraulic) 12

(Servo) 8

Servo motor for power tool - 2.2/3.7

Kw -

Max. Speed of power tool - 5000

r/min -

Outside dia.Cutting tool shank

25 x 25 mm 20 x 20 mm 20 x 20 mm

Max. inner dia. Cutting tool shank

40 mm 32 mm 25 mm

Guide ways X&Z Precision linear ball rail Tailstock sleeve dia. 80mm 80mm

Tailstock sleeve travel 100mm 90mm

Tailstock center type M.T.No.4 M.T.No.4

Type of spindle motor Servo Servo

Spindle motor power 11/15 Kw 15/18.5

Kw 7.5/11 Kw

Bed structure 45° Slant bed integrated with stand Min. input 0.001 mm 0.001 mm Repeatability ± 0.003mm ± 0.003mm Capacity for coolant 120L 100L

Overall dimensions (L*W*H)

2712 x 1660 x 1850mm 2700 x 1460 x 16850mm

Net weight 4500 kg 3000 kg

Model GH2660C / GH2680C / GH26120C Distance between centres 1000/1500/2000/3000 mm Swing over bed 660mm Swing over carriage 4 20mm Swing over gap 870mm Bed Width 4 05mm Spindle Bore 105mm Taper of spindle bore 113mm 1:20 Spindle nose D1-8 Step of spindle speeds 1 2 Range of spindles speeds 36-16000rpm Range of cross feeds 0 .027-1.074mm/r Range of longitudinal feeds 0.063-2.52 mm/r Range of inch threads 28/-2 T.P.I /25 Range of metric threads 1-14mm/22 Range of module threads 0.5-7mm/18 Range of diametrical threads 4-56 D.P/24 Rapid feed of cross traverse 1.9 m/min Rapid feed of longitudinal travers 4.5m/min Top slide travel 145mm Cross slide travel 310mm Max. size of tools (W X H) 25 x 25 mm Tailstock quill diamter 75 mm Tailstock quill travel 150mm Taper of tailstock quill MT5 Motor 7.5kw Packing size 2500/3000/3500/4500 x 1100 x 1650mm Net weight 3000/3200/3400/3600 kg

Standard Accessories

3-jaw chuck (325mm) 4-jaw chuck (400mm) Face plate Steady rest Follow rest Splash guard Stand Halogen work lamp Toolbox & tools Coolant system Foot brake Five position carriage stop

Optional Accessories

Quick change tool post Turning tools Leadscrew cover Chuck guard Tool post cover Digital readout system Taper turning attachment One piece casting stand

CNC lathe

FEATURE:

FANUC control system and servo motors.

The spindle is supported by NSK bearings.

Automatic timely lubrication device.

Stainless steel inner protection, totally sealed outside protection.Different control and parts can be combined according to customers’ requirement

D019542_Jet_Catalog 27 (258-264)264 264 7/1/2015 12:52:20 PM