LINEGATE Series

INDUSTRIAL BATTERY CHARGERS/RECTIFIERS

ApplicationsOil & Gas - Onshore and Offshore Facilities | Refineries | Petrochemicals

Power Generation | Transmission & Distribuition | Manufacturing | Telecommunication

www.apec-sa.com

Built to Last...

www.apec-sa.com

LINEGATE Series24, 48, 110, 125 & 220 VDC

25 - 800 Amps

Arabian Power Electronics Company (APEC) offers LINEGATE series of heavy-duty industrial battery chargers/rectifiers designed to provide secured DC power for critical loads. These chargers are designed to charge all types of batteries, such as Ni-Cd, Vented Lead Acid, Valve-Regulated Lead Acid types etc. LINEGATE chargers are constant voltage devices with builtin current limiting feature and accurate voltage regulation for optimized performance.

KEY DESIGN FEATURES

High ReliabilityLINEGATE Series chargers are designed for high reliability components are selected with high de-rating factor to assure maximum MTBF.

Long Design LifeComponents are carefully selected to provide a system that will operate at extreme ambient conditions with life expectancy in excess of 25 years.

DurabilityEnclosures are industrial grade that are made of firmly welded heavy-gauge steel with an attractive, long-lasting powder textured coating (RAL 7032). Standard cabinets are NEMA-1 (IP-20). Other protection classes and colors are available upon request.

Ease of MaintenanceMost power and control modules are provided in sub-assembled chassis with plug and socket connections for easy serviceability and minimized spare part inventory.

Ease of AdjustmentOutput float voltage, equalize voltage, current limit and alarm levels are easily adjustable.

Ease of AccessAll components are front accessible; no side or back clearance is required. Internal components and connections are easily accessible and/or removable through a hinged front door.

Ease of InstallationCabinets are floor mountable with bottom entry equipped for cable or conduit entrance. Input, output and remote alarm connections are wired to internal terminal blocks that are easily accessible.

Dynamic Load Sharing Parallel OperationLINEGATE Series chargers are featured with dynamic load sharing capability to ensure load is equally shared between parallel chargers.

IEC CompliantLINEGATE Series chargers are designed and tested in accordance with IEC Standards.

CB CB

V

INPUTTRANSFORMER

RECTIFIERFUSE

DC OUTPUT

V

A

AC INPUT

A

F

Battery Charger Single Line Diagram

www.apec.com.sa

LINEGATE Series

STANDARD FEATURES AC Input Circuit Breaker (14 kAIC) DC Output Circuit Breaker (10 kAIC) DC Output Ammeter and Voltmeter Current Limit Adjustment Manual Float/Equalize Switch Float and Equalize Adjustment AC and DC Surge Suppressors Latching Alarm with Reset Event Log Lifting Eye Bolts USB Communication Port

AC Input Circuit Breaker (65 kAIC) Battery Output Circuit Breaker (20 kAIC) Twelve-pulse Design DC Rated Potential-free Alarm Contacts Lamp Test Pushbutton Audible Alarm with Silence Pushbutton Blocking Diode for Parallel Charger Operation Reverse Polarity Protection Ground Fault Alarm Ground Fault DC Voltmeter Temperature Compensated Charger Equalize Inhibit through Remote Signal DC-DC Converter Diode Dropper Space Heater with Thermostat SNMP Compatible Remote Web Monitoring RS232/RS485/MODBUS

OPTIONAL FEATURES

PRODUCT SPECIFICATIONSAC InputVoltage Single Phase: 120, 220, 230, 240, 277 VAC Three Phase: 208, 380, 400, 415 or 480 VAC*Input Voltage Tolerance ±10%, (up to ±20% on request)Frequency 50 or 60 HzInput Frequency Tolerance ±5%Efficiency 88-93%, type dependent

DC OutputVoltage Ratings 24, 48, 110, 125, or 220 VDC*Current Ratings 25-150 ADC (For Single Phase Input) 25-800 ADC (For Three Phase Input)Voltage Regulation Float ±0.5% (within input variation) Float ±1% (combined variation of input, load and temperature) Equalize ±1% (within input variation)Output Current Limit 100% of rated capacity (adjustable from 50 to 100%)DC Ripple 2% rms of nominal output voltage - with battery (Ah=5 times rated current) conneted

MechanicalCabinet Protection IP 20/NEMA 1, (Optional up to IP 54)Cable Entry Bottom, (Top entry on request)Mounting Floor mounting (wall mouted for 1 Phase Input Models)Coating RAL 7032, powder texture coated (other colors on request)Access Front AccessCable Marking Interlocking Ferrules

EnvironmentalOperating Ambient Temperature 0 C to 45 C (50 C optional)Storage Temperature -40 C to 65 COperating Altitude Up to 1000 meter without de-ratingRelative Humidity 0-95% non-condensingAudible Noise <65 dBA at 1 meterVentilation Forced air cooling

Indications and AlarmsStandard Indication / Alarms Charger On Float Mode Equalize Mode AC Input Failure High Output Voltage Low Output Voltage Over temperature Shutdown Charger Failure

Optional Indications/Alarms AC Input Breaker Open Battery Breaker Open Mains Over/Under-voltage DC Overload Positive to Ground Fault Negative to Ground Fault Battery End of Discharge Over-temperature Warning Cooling Fan Failure

MeteringLCD Display DC Output Voltage DC Output Current

Optional Metering AC Input Voltage AC Input Current AC Input Frequency Ground Fault Voltage Battery Voltage Battery Current

o o

o o

o

www.apec-sa.com* For Other Voltage Ratings, Consult Factory

24, 48, 110, 125 & 220 VDC

25 - 800 Amps

www.apec-sa.com

Three Phase Input Models

For IP 21/31/41, add additional 150 mm height for drip shield

MODEL SELECTION (LXYYZZZ) L - LINEGATE Series X -Input Phase (1=1 Phase, 3=3 Phase) YY - Output Voltage (02=24 VDC, 04=48 VDC, 11=110 VDC, 12=125 VDC, 22=220 VDC) ZZZ - Output Current

* Specifications in this catalog are subject to change without prior notice

P.O. Box 4955, Al Khobar 31952 - Saudi Arabia Tel: +966 (3) 887 2001 Fax: +966 (3) 887 2125E-mail: info@apec-sa.com

ARABIAN POWER ELECTRONICS COMPANY

Cabinet Size (HxWxD) mm

Weight (kg)

Heat Loss (watts)

Cabinet Size (HxWxD) mm

Weight (kg)

Heat Loss (watts)

L3YY025 25 - - - - -L3YY050 50 1200x600x500 60 180 1200x600x500 90 360L3YY100 100 1200x600x500 150 360 1200x600x500 150 720L3YY150 150 1200x800x500 240 520 1200x800x500 340 1040L3YY200 200 1200x800x500 290 670 1200x800x500 400 1340L3YY300 300 1200x800x700 400 790 1200x800x700 500 1580L3YY400 400 2000x1000x700 510 950 2000x1000x700 620 1900L3YY500 500 2000x1000x700 620 1250 2000x1000x700 790 2500L3YY600 600 2000x1000x700 700 1490 2000x1000x700 910 2980L3YY800 800 2000x1200x700 910 1850 2000x1200x700 1100 3700

Cabinet Size (HxWxD) mm

Weight (kg)

Heat Loss (watts)

Cabinet Size (HxWxD) mm

Weight (kg)

Heat Loss (watts)

L3YY025 25 1200x800x700 90 375 1200x800x700 220 710L3YY050 50 1200x800x700 220 650 1200x800x700 305 1235L3YY100 100 2000x1000x700 400 1200 2000x1200x700 390 2280L3YY150 150 2000x1000x700 500 1550 2000x1200x700 470 2945L3YY200 200 2000x1200x700 520 2050 2000x1400x700 650 3895L3YY300 300 2000x1200x700 870 2650 2000x1400x700 775 5035L3YY400 400 2000x1400x700 1120 2800 2000x1600x900 1350 5320L3YY500 500 2000x1400x700 1250 3650L3YY600 600 2000x1600x900 1600 4200L3YY800 800 2000x1600x900 1750 5800 - - -

- - -- - -

220 VDC Ouput

Model Number

DC Current24 VDC Output 48 VDC Output

110/125 VDC OutputModel Number

DC Current

LG C

at.0

3.12

LINEGATE Series

MODEL SPECIFICATIONS Single Phase Input Models

Cabinet Size (HxWxD) mm

Weight (kg)

Heat Loss (watts)

Cabinet Size (HxWxD) mm

Weight (kg)

Heat Loss (watts)

L1YY025 25 800x600x500 40 80 800x600x500 60 165L1YY050 50 800x600x500 60 156 800x600x500 90 305L1YY100 100 800x600x500 90 295 800x600x500 120 575L1YY150 150 800x600x500 120 450 - - -

Cabinet Size (HxWxD) mm

Weight (kg)

Heat Loss (watts)

Cabinet Size (HxWxD) mm Weight (kg)

Heat Loss (watts)

L1YY025 25 800x600x500 90 350 1200x600x500 120 650L1YY050 50 800x600x500 120 640 - - -

48 VDC Output

110/125 VDC Output

Model Number

DC Current

220 VDC Ouput

24 VDC Output

Model Number

DC Current