Bank of Barodabankofbaroda.com/download/TR-00030364_Naihati.pdf · List of technical persons...
Transcript of Bank of Barodabankofbaroda.com/download/TR-00030364_Naihati.pdf · List of technical persons...
1
2.
3.
4.
5.
6.
7.
1. The tenderer should have completed in last three Financial years (i.e. current year & two previous financial year) in Bank,
Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc. minimum 3 (three) similar composite work
(Interior Furnishing & Electrical) costing not less than Rs. 15.00 lacs in single contract. (Work order & completion Report in
Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility criteria & the
technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain : financial bid along with a copy of the
tender document, duly signed in all pages both shall be separately sealed & submitted in another sealed envelope to the
Asst. General Manager, Bank of Baroda, West Bengal, Sikkim & A & N Island, BARODA TOWER, Plot No. 38/2, Block GN, Sector-V,
Salt Lake City, Kolkata : 700 091, before 2.30 P.M. on 13.07.2011 along with Earnest money amounting to Rs. 16,000/- by
Bank Draft / Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.
MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)
Part 'A' will be opened at 3.30 p.m. on 13.07.2011.
Part 'B' of the tenders will be opened for those only who fulfils the qualifying criteria given in the tender document. The
unopened part 'B' along with Earnest Money deposit for those not fulfilling qualifying criteria will be returned.
Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our Consultant M/s.
Design Group, P-267, BL-B, Lake Town, Kolkata - 700089.
Phone No - 9831117490
The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders without
assgming any reason whatsoever.
Bank of Baroda
Bank of Baroda, West Bengal, Sikkim & A & N Island invites sealed tenders in two bid system for the proposed interior &
electrical work of Naihati Branch, 5/1, R.B.C. Road, P.O. Naihati, Dist. 24 Parganas (N), West Bengal-743 165. The work is
to be completed within 2(Two) weeks.
(Government of India Undertaking)
NOTICE INVITING TENDER
Interested agencies having experience in work of similar nature & magnitude and fulfilling the eligibility criteria given below
may download detailed tender document from Bank's Website http:bankofbaroda.com/tenders.asp
2.
3.
4.a) The Tenderer shall furnish copies of :
i) IT Registration Certificate with No.
ii) Sales Tax Registration Certificate with No.
iii) Service Tax Registration Certificate with No.
iv) Electrical Contractor's License with No.
v) Electrical Supervisor’s License with No.
5.
a)
b)
c)
marked Annexure - V
(Interior Furnishing & Electrical) costing not less than Rs. 15.00 lacs in single contract. (Work order & completion Report in
support must be submitted & marked as Annexure-I)
The total contract amount received by the Tenderer during the last 3 financial years should be minimum as 40.00 lacs per
year in contract work. In support of this the Tenderer should submit audited sheet duly Certified by the Chartered
Accountant & marked Annexure-II.
The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an amount of 200% of the
advertised Tender value marked Annexure-III.
The Tenderer should also submit the following documents along with the Tender.
List of technical persons available on hand, years of their association with the firm & proposed to be engaged for the
subject work, if selected (marked Annexure-IX) ;
marked Annexure - VI
marked Annexure - VII
marked Annexure - VIII
List of important plant & machinery available on hand (own) and proposed to be inducted (own & hired to be given
separately) for carpentry & electrical work (marked Annexure-X)
List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt,Govt. undertaking / Corporate
Sectors giving description of work, organisation for whom executed, approximate value of contract at the time of award,
date of award and date of scheduled completion of work, date of actual completion and final value of contract should
also be given (marked Annexure-XI)
marked Annexure - IV
1
d)
e)
1.
2.
3.
4.
5.
6.
7
8.
9. Payments will be made once on completion by the Employer within 15 days after certification of bill by the Consultant 10%
of the total payable amount is to be retained as retention money and will become due for release after expiry of six months
GENERAL TERMS & CONDITIONS
The tenderer are to visit the site and acquaint themselves with site conditions before quoting rates.
The arrangement for “ Wire Management " is to have prior approval of the Client.
The quoted rates shall remain firm during the entire currency of contract. No price variation for any causes whatsoever,
shall be entertained.
The time of completion shall be two (2) weeks from the date of placement of order.
The offer shall remain valid for acceptance for a period of 30 days from the date of submission of offer.
List of works in hand indicating description of work, contract value, approximate value of balance work yet to be done
and date of award (marked Annexure-XII)
Contractors will be required to arrange for their own storing. Dismantled materials are to be carted away from site at their
own cost and disposed of in conformity with Municipal regulations.
The quoted rates, are to include cost of all materials, labour and or any other material, all statutory taxes, transport,
handling delivery at site and installation, complete in all respect, as per drawing, directions or instructions of
Employer/Consultant. The quoted rates are also to include dismantling of partitions, counters, old electrical wirings etc.
and stacking serviceable materials and disposal of debris, etc.
Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to be used in the work.
Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for day to day supervision &
coordination of the work at site.
All informations are to be fully authenticated & documented failing which the documents submitted will not be accepted.
10.
11.
of the total payable amount is to be retained as retention money and will become due for release after expiry of six months
from the date of completion of the installation & subject to satisfactory maintenance of the executed work.
Tenders addressed to Asst. General Manager, Bank of Baroda, West Bengal & Sikkim Region and submitted at his office at
BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata : 700 091, before 2.30 P.M. on 13.07.2011,
accompanied by Earnest Money amounting to Rs. 16,000/- by Bank draft payable to Bank of Baroda and other
documents as mentioned in NIT. Part 'A' of the tenders will be opened at 3.30 P.M. on the same date.Part 'B' will be opened
immediately after opening of Part 'A'.
The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders without
assigning any reason whatsoever.
2
SPECIFICATION OF MATERIALS FOR INTERIOR WORK
Sl.No. Description
1. Laminate
2. Ply & Block Board
3. Glass
4. False Ceiling & Accessories
5. Veneer
6.Textured Wall Paint
7. Glue
8. Locks
9. Aluminium Hardware Fittings
10. Brass Hardware
11.
Floor Spring
12. Screws
13. Casters
14. Sliding Drawers / Channels
Brass Arts / Vijoy
Evrite Agencies Pvt. Ltd. / Nita Floor Spring
Nettle Fold
Marino / Greenlam / Century / Archid
Make (s)
Efficient Gadjets
India Gypsum Ltd.
Metako / Allen / Crown with ISI Mark
Earl Behari / Efficient Gadjets
Durian / Century / Archid
ICI, Jenson & Nicholson / Asian paint /
Berger
ICI, Spectrum, Heritage
Godrej / Secur / Yale
Green / Century / Archid / Austin
Modi / Indo Ashahi / Float Glass India Ltd.
14. Sliding Drawers / Channels
15. Furnishing Fabric
16. Leather Foam
17. PVC Flooring
18. Carpet Glamour or Favourite (Balla Industries)
Woven type "Harmony" range from "Vimal"
or equivalent
Bhor Industries or equivalent
Armstrong / Krishna / Premier
Earl Behari / Efficient Gadjets
3
SPECIFICATIONS OF MATERIALS FOR ELECTRICAL WORK
Sl.No. Description
1. Switch fuse / fuse switch units (HRC) (32A TPN & above)
2. Timer (TSQ 100)
3. Voltmeter & Ammeter
4. Voltmeter & Ammeter selector switches
5. Phase indicating lamp
6.
7. Capacitor
8. HRC fuses
9. Power Cable : XLPE
10.
11. HRC fuse base & carriers.
12. PVC terminals
13. 1.1 KV grade PVC insulated armoured aluminium cable (ISI marked)
14. 1.1KV 660V grade PVC insulated & sheathed / insulated copper wire &
flexible cords (ISI marked).
Vaishno / SIEMENS / ROSS controls
SWITCHGEAR
L & T
GE power / SIEMENS / L&T / Schneider
GE power / SIEMENS / L & T / SCHNEIDER
UNIVERSAL / GLOSTER / NATIONAL / NICCO
NATIONAL/FINOLEX/ HAVELLS
A. E. / IMP
Make (s)
GE Power/SIEMENS/L&T/SCHNEIDEV
ELMEX / ESSEN
A E / KAPPA SEGC & CONTROLS / CONTROL
KAYCEE / L & T
CROMPTON/SIEMENS
TATA LEVERT/NEUMERIC/ KIRLOSKAR
GLOSTER/INCAB/POLYCAB/CINOLEX
15. Moulded case circuit breaker
16. RCCB / ELCB
17. Switch fuse with rewirable fuses. (6A & 32A TPN)
18. Isolator
19. Changeover switch (on load type)
20. MCB distribution board
21. Distribution fuse board with rewireable fuses
22. Miniature circuit breaker / MCB type isolator
23. Contractors
24. Auxiliary contractor
25. 1/16 Amp Piano key type switch / flushed type plug socket
26. 6/16 Amp modular switch / socket, module plate & mounting M.S. / PVC box.
27. 300W, 2 module electronic regulator
HAVELL’S / BPC / BOSMA
L & T / SCHNEIDER/LEGRAND
CPL (Genius) / ANCHOR (Roma) / CRABTREE
/
MK
ANCHOR (Roma) / CRABTREE / MK
ANCHOR / PRECISION / SSK & RIDER
HAVELL’S / STANDARD
LEGRAND / SIEMENS
KENBAR / HAVELLL’S / ELCON / HPL /
CONTROL & SWITCHGEAR.
LEGRAND/ SIEMENS
SIEMENS / L & T/BCH
SIEMENS / L & T
HAVELL’S / STANDARD
LEGRAND/ SIEMENS / L&T
4
Sl.No. Description
28. Ceiling rose
29. Holder
31. Luminous indicating type buzzer with cancellation push.
32. Alarm bell.
33. G.I. pipe
34. Steel conduits (conforming to IS in all respects)
35. Black enamelled
36. Galvanised
37. Non-metallic PVC conduit pipe
38. Compression type brass gland
39. Cable termination socket
40. Light fitting & lamps
41. Decorative/Ornamental /Chandelier / Light Fittings
42. Ceiling Fan
43. Exhaust fan
CROMPTON / POLAR / KHAITAN
CROMPTON / POLAR / KHAITAN
CROMPTON / POLAR / KHAITAN / EPC
Good local make with minimum wall
thickness of 3 mm. for 19 / 20 mm. and 25mm
sizes & 2.5 mm. for 12mm. sizes
BEC / SUPREME / AKG
BEC / SUPREME / AKG
BST / BANSAL
DOWELL'S
WIPRO or equivalent
DOWELLS / JOHNSON / COMET
PLAZA / KALINGA/ PRECISION/AKG or
equivalent
KHERAJ / GETCO
KAY / EPP / ANCHOR / JJ
KAY / EPP / ANCHOR / JJ
Make (s)
NATIONAL / HOMA / EQUIVALENT
43. Exhaust fan
44. Industrial type socket & top
45. Telephone wire
46. Telephone Socket
47. Network Cable
48. Contractors
49. STARTERS
FINOLEX or equivalent
L & T / SIEMENS
NORTH WEST / CABTREE
HAVELL’S / CROMPTON / LEGRAND
FINOLEX / RRK/NATIONAL
CRABTREE/MK
CROMPTON / POLAR / KHAITAN / EPC
5
PART – A
SCHEDULE OF FURNISHING ITEMS- Bank Of Baroda, Naihati Branch, 24 Pgs (N).
SL
no
Item Unit Qty Rate Amount
1.
2.
3.
Partition full height
Providing and placing in position partly solid and partly
glazed partition of 2nd
CP teakwood of section 2”x2”
vertical and 2”x1.5”horizontal at 2’0” c/c for solid
partition covered with 6mm phenol bonded BWR ply
on both sides and finishing the same with 1mm
laminate, color and brand as per specification / chosen
by the architect / official & as per drawing detail.
The general detail of the partition consist of a solid
portion up to 3” ht from FFL, above of which up to
7’0”is glazed. The glass in the partition will be
generally 6mm thk remaining portion above the glass
till the false ceiling to be solid portion.
There will also be some totally solid portion without
any glazing to block the vision as required or indicated
in the drawing.
Vertical wooden members of the partition to be
extended above to take support from the actual ceiling
to make the partition strong and sturdy and the cost for
which is supposed to be included in the rates of partly
solid and partly glazed partition.
The partition will have provision of doors made out of
4.5”x1.25” TW section for vertical & horizontal
members with 6mm thk clear float glass held by TW
beading, cash cabin doors to be solid upto 3’0”ht with
2’x6” AC diffuser powder coated grill fitted below on
both faces of door, hinged on 3 nos. brass hinges as
required the cost shall include all fittings godrej SS
round locks, night latch for all cash cabin doors, door
closers etc. all as required. Partition will have provision
of 4”wide laminated skirting of different colour on both
sides and glass to be fixed with TW beading all
polished and finished to the satisfaction of architect/
official. All glass used to have ½” itching, ½” gap & ½”
sand blasting all around at 3” from the edge of the glass
as per design/ direction.
Mode of measurement to be area from F.F.L to false
ceiling & in case of varying heights such as false
ceiling and actual ceiling on either side of partition,
average height shall be considered.
Low height partition
Specification same as wooden partition height upto
4’0”and as per drawing, with 2’11” solid and rest
glazed with 6mm glass, lippings on edges polished with
melamine finish for superior finish to the satisfaction of
architect/ official. Partition to also have doors/ flap
doors on hinges with godrej night latch as required /
shown in drawings. All glass used to have itching as
described in full ht partition.
Storage cabinet –low, high & wall hung (Depth 1’6”)
Made out of ¾” BWR block board on all sides and top.
Sft
Sft
729
66
4.
5.
6.
Back of cabinet will have 6mm. BWR ply. Front will
have shutter as door and inside will have counter spaces
(@ 1’6”+- ). All outside surface to be laminated in
1mm mat finish laminate inside surface to be painted in
2 or more coats of enamel paint. Block board exposed
edges to be always teak wood lipped & polished
wherever visible irrespective of whether it is separately
mentioned or not in individual items. Rates inclusive of
all accessories such as auto hinges , SS handle, powder
coated AC diffuser grill for ventilation as required,
godrej locks etc.
It is to be made as overhead hanging or upto 3’0”/
7’0”ht from F.F.L. or as is required and directed. Only
front elevation to be considered for area calculation.
Painting two or more coats oil bound distemper to walls
with a coat of priming in roller coat including cleaning
and smoothening surface with wire brush to remove
existing paint applying PoP to a smooth finish in line
and level as per direction. Applying Luster paint of ICI
Dulex Acrylic Emulsion Barley White Ivory Colour.
Aluminium twin stile door with 12mm. thick clear glass
with etching 1” horizontally and 1” gap all through the
width with logo, bank & branch name in the center -as
per design/direction in powder coated aluminium frame
work with door shutter of width 3’0”to 3’6” consisting
of 9x4 cm. bottom rail and top rail fixed with 12mm.
thick glass including aluminium powder coated door
frame as per direction fixed with floor spring
mechanism complete in all respect including required
fittings, S.S. handles around 1’0” long as chosen with 7
lever mortice locking arrangement as per IBS security
norms or as directed by bank.
False ceiling ( Gypsum ) providing & fixing ½” thick
Fireline GypBoard ( IS 2095 & 2545 amendment 82 &
81) suspended with G.I section of India gypsum from
R.C.C. roof @4’ c/c maximum , for supporting
intermediate channel ( 15mmx45mm) 9mm thick @4’
c/c maximum and ceiling section (80x26)%mm thick @
1’6” c/c maximum ceiling section is supported along
the wall and edges with perimeter channel gypsum
board shall be screwed to ceiling section filling the
joints with plaster of paris/paper tape and finally finish
in the whole surface with one layer of plaster and
making the surface smooth.
The false ceiling would also consist of necessary cut
outs for electrical & fire fighting fittings and fixtures as
shown in the respective drawing with perimeter channel
around. Two trap door 2’ x 2’ is to be provided as
directed in the false ceiling made of 19mm BWP
plywood with necessary teak wood frame work as
required.
2 ½”x2 ½” PoP moulding as per design / direction to be
provided all along the wall where vertical and
horizontal surfaces meet.
Two coats of oil bound distemper to be applied to the
Sft
Sft
Sft
232
2450
43
7.
8.
9.
10.
11.
12.
13.
14.
false ceiling in roller coat over a coat of primer.
Rates shall be quoted considering all above cost
inclusive of all standard accessories like connecting
clip, soffit clear rawl plug etc. The entire work to be
done to the satisfaction and instruction of bank
architect/client.
Providing planters in matt finish stainless steel
container around 40/50 cm. Dia with natural indoor
plant as chosen in plastic tumbler decorated on top with
small white marble pebbles placed as instructed.
Writing Ledge size 3’0”x1’0”x6”– made out of ¾”
blockboard with ½” ply slotted partitions about 5”
apart, edges lipped, polished and finished, top of ½”
glass machine polished edges clipped to the blockboard
structure.
Supply and fixing of vertical blinds for windows etc,
colour & pattern as chosen of 4” wide with sliding &
tilting mechanism complete.
Painting two or more coats with best quality synthetic
enamel paint over a coat of primer of approved make
and brand including smoothening surface by sand
papering etc. including using of approved putty etc. on
grill, wooden, wall the surface, as required.
Providing and applying textured finish paint as chosen
by the architect/ official with trowel / designed roller
application in walls after rectifying damage to the wall
surface applying PoP film coat as required.
Supplying & fixing of Vitrified floor tiles 2’0”x 2’0”
Evita Vitrified Asian- Ivory colour in floor & skirting
4” wide in customer lobby as per drawing with tile
joining adhesive and filling the joint in between tiles
with coloured filler compound as per manufacturer’s
specification (ROFF, Bal Endura, Dr. Fixit of Pedilite
or equivalent). Measurement to be the plan area of the
flooring. The skirting shall also be measured on sq ft
basis.
Wall paneling for putting marketing poster made by
fixing 2”x1.5” TW section 2nd
grade with ¾” thick
blockboard on top 7.5”wide, edges lipped projected on
the outside edges laminated and finished forming 2.5”
deep cut-out size around 2’6”x3’6” in the inside as per
poster size for putting up marketing poster as required.
Wall paneling to be paid less cut-out. Transparent vinyl
sheet used for putting up poster to be separately paid.
Supply providing & fixing miscellanies items as below:
a) Complaint & suggession box made of 19mm BWR
blockboard laminated and finished with one
openable panel in front with body lock. Size
1’0”x1’6”x6” depth with slit in front for receiving
complaints. Writing on top in enamel paint such as
Sft
Nos
Nos
Nos
Sft
Sft
Sft
Sft
1600
6
1
140
180
850
1750
57
15.
16.
17.
18.
19.
20.
name, address, purpose etc as directed by client.
b) Letter box same as above as complaint &
suggession box.
c) Sign board 3’x2’ made of imported highly
transparent PVC sheet 8 mm thk beveled edges
machine polished, 2nos held together at 4 corners
by matt SS spacers to be used for putting up clients
business promotional posters from time to time.
Sofa Side unit - general specification consists of 18mm
ply box 1’6”x1’6”x1’6” laminated and finished, as per
matching laminating schedule bottom surface painted
and having buffers at the bottom.
Providing and fixing in position Aluminium composite
panel Boxing with PVDF coating & LDPE core
laminated Eurobond / Altobond/ Alukbond Exterior
Grade 4 mm thick with composite of ( 0.5mm-3mm-
0.5mm) including fabrication for the same with
aluminium sections, required hardware, silicon sealant
(Dow Corning 789) masking tape, necessary
scaffolding etc. as detailed in drawing no (11) complete
in all respects. Colour Viva Brush Gold
Supplying, and providing 3 seater tandem chair of
Methodex seating systems for lounge & public seating
model no L3CH in stainless steel finish.
Officer Work Station size 4’6”x 2’6”
Made out of ¾” BWR block board on top, front and
sides with 1mm laminate finish on all external surface
with ¼ ” thick TW lipping on exposed edges polished
as per design. Front apron has 12mm thk recessed
panels as per drawing with TW moulding polished
finished. One side of the table according to seating
arrangement to have three drawers running on channels
1’2” wide. Ebco key board tray & CPU trolley to be
provided. Footrest as required for each table. Non
laminated and internal surfaces to be always painted
(irrespective of whether it is mentioned in the
respective item or not ) with two or more coats of
enamel paint and inclusive of all hardware fittings and
fixtures such as godrej locks (one lock for 3 drawers),
SS handle, cable manager as required to be complete
and operational in all respects. Refer drawing where
provided and to be made in a free standing format.
Manager Work Station ( size 5’0”x 3’0”)
Same as officer work station but of little bigger size.
Side table ( size 3’0”x 1’4”)
Made out of ¾” BWR block board on top, front and
sides with 1mm laminate finish on all external surface
with ¾” thick TW lipping on exposed edges polished as
per design. Side table to have one pencil drawer of
entire length, 3”wide on top & cabinet with sliding
panel below, sliding on channels. Non laminated and
internal visible surfaces to be always painted with two
Nos
Nos
Nos
Nos.
Sft.
Nos
Nos
Nos
1
1
5
1
215
2
7
1
21.
22.
23.
24.
25.
26.
or more coats of enamel paint and inclusive of all
hardware fittings and fixtures such as godrej locks, SS
handle, cable manager etc required to be complete and
operational in all respects.
Cash counter Table 4’6”(+-) x2’6”
Table made out of ¾” block board with 1mm laminate
on drawer fascia and sides. Customer top of profile
block board fixed to main table at a higher height as per
modular cash counter. Table will have provision of 3
drawers running on channel , leg rest, godrej locks (one
lock for 3 drawers), SS handle. Inside surface shall be
painted in 2 or more coats of enamel paint. Also refer
design detail for cash rack, laminated working top as
per modular cash counter. Key board tray, CPU trolley
etc to be provided as described earlier.
Front 12mm glass apron, finish ht 6’0” machine
polished with cut-out as per dwg for cash work station,
etching detail as described earlier.
Host & Daftary Table 4’0”x2’0”
Same as officer work station but of smaller size, with
no key board tray, CPU trolly.
Providing and fixing anodised aluminium sliding 2 /3
track and fixed portion as required windows /
ventilators of good quality Aluminium sections ( Indal /
ECIE) with 4mm th. Frosted glass. The rate to include
necessary hardware fittings, fixing, etc., complete as per
design & direction.
Separate MS grill to be fitted on the outside made of
MS flats for safety painted and finished with one coat
primer and 2 coat paint rectifying all damages done
filling up the sides of the window with cement mortar
& PoP on the inside as required. The item also involves
removing existing wooden & steel windows and
rectifying all damages done.
Breakage and removal of existing partitions, cabinets
etc Making new window / door opening, Removing
window / door frame, the entire existing old floor
material, cleaning to make provision for laying of
vitrified tiles, removing / dismantling/ shifting existing
partition, furniture etc to facilitate all new work as
required. Lifting and dumping of all waste material to
municipal dumping ground. (contractor to must visit
site )
Buyback and taking away all the old furniture, fixture,
partitions etc which are not required or getting newly
done and as decided by the consultant / bank.
(contractor to pay bank for buyback items in lumpsum)
Chairs:
a) Medium back chair, 360° revolving, twin wheel
castors on extended legs, back reclining, hydraulic
height adjustment with Polyurethane arm rest . The
framework of chair should be made out of matt
Nos
Nos.
Nos.
Sft
LS
LS
11
3
2
144
finish, black, powder coated, durable, tubular steel
or die cast aluminium base with proper fabric
upholstered seat and back having high density
foam.
MHB3 of Methodex or equivalent approved.
b) Revolving Computer chair, 360° revolving, twin
wheel castors on extended legs, Polyurethane arm
rest, hydraulic height adjustment . The framework
of chair should be made out of matt finish, black
powder coated, durable, tubular steel or die cast
aluminium base with proper fabric upholstered seat
and back having high density foam.
X12 of Methodex or equivalent approved.
TOTAL OF PART-A
Nos.
Nos.
1
22
PART – B
SCHEDULE OF ITEMS FOR TOILET & PANTRY RENOVATION - Bank Of Baroda,
Naihati Branch, 24 Pgs (N).
SL no Item Unit Qty Rate Amount
1.
2
3.
4
5.
Breakage and removal inside the toilet in Ground floor,
existing mosaic / tiles in wall & floor, GI & PVC pipes,
porcelain sanitary ware, brick partition, pcc in toilet
floor & wall tiles including fixtures, broken windows,
existing wiring, damp plaster removal, damp toilet wall,
dismantling of leaking, damaged CI sewage pipes, fresh
water tubes as required. Removal of broken and damage
doors, making new opening for doors as per direction or
for execution of the below mentioned items of work to
the satisfaction of the Architect / official including
removal of all rubbish collected both inside and outside
to CMC approved dumping ground.
Providing and laying P.C.C. inside the building after
removing damaged and cracked portions at various
heights and levels in the toilets as required to prepare
for laying of fixtures slope correction as required and
using 1:1 ½:3 aggregate 20 mm nominal size.
Applying water proofing agents on the mother slab and
upto 1’0” in the wall in proportion as recommended by
the manufacturer such as ROFF, Dr Fixit or equiv.
After applying holding of water in the form of a bund
for few days and checking for water leakages, mending
good all damages and defects if any to the complete
satisfaction of Architect / official.
Supply, fitting, fixing of cast iron soil pipe conforming
to IS: 3989/1970 and IS: 1929/1964 at any height with
bobbins, nails etc. including making holes in the wall,
floor etc. and cutting trenches etc. in any floor through
masonry concrete if necessary and mending good
damages with necessary jointing materials and painting
two coats on the exposed surface with approved paint.
It should also consist of bent with door, T, Y, angle,
traps flat and round type with or without inlet receiving
caps wherever required, extension pipes (connector),
vent cowl, aluminium round grating as require etc. The
pipes and accessories to be join by cement mortar 1:3.
Price per running length of pipe should include the cost
of accessories as and where required, work to be done
at any height to the complete satisfaction of the
Architect / Client.
4” dia.
3” dia
Supplying, fitting and fixing approved quality ceramic
tiles 1st quality, size for wall 320x400mm & matching
floor 320x320mm or similar size, colour combination
as chosen with inbuilt border pattern at 3’0” level set in
sand cement mortar (1:4) including backing complete
fixed as per standard practice and finishing the joint
Job.
Cft
Sft
Rft
Rft
1
53
95
16
9
6.
7.
8.
9.
with white cement mixed with required colouring oxide
to match colour of tiles (Rak / Kajaria / Johnson/ Bell
etc.) or equivalent.
Providing and fixing white vitreous china flat back or
half stall urinal of 580x380x350mm and partition size
610mmx310mm of Parryware, Hindware or equivalent
with fittings, C.I/M.S brackets standard size C.P brass
flush pipe, spreaders with unions and clamps (all in
C.P. brass) for each urinal controlled by CP wall cock /
angle cock separate for each urinal to be fitted on top,
with P.V.C waste pipe, waste fittings as per IS 2556,
C.I trap with outlet grating and other coupling in
C.P.brass including painting of fittings and brackets,
cutting and making good the walls and floors wherever
required. The job includes the concealed laying of ½”
GI water supply pipes from the nearest source where as
CI pipe required for drainage is to be separately paid.
Supply and installation of one urinal and one porcelain
partition wall making a set of approved make complete
& operational in all respects.
Providing and fixing white vitreous china flat back
wash basin size 630x450 mm with vitreous china
matching pedestal for wash basin of Parryware
completely recessed at the back for the reception of
pipes and fittings, C.I. /M.S. brackets, 15mm C.P. brass
pillar tap on top & angle cock below of Jaguar or equiv,
32mm C.P. brass waste, including waste pipe of
standard pattern. Painting of fittings and brackets where
required. The job also includes the concealed laying of
½” GI water supply pipes from the nearest source &
40mm PVC drainage pipe to be concealed in the wall/
floor and carrying and opening to the nearest drainage
outlet cutting and making good the walls where
required all complete and operational in all respects.
Providing and fixing white vitreous china Parryware
‘Cascade’ water closet & cistern (EWC) with matching
seat cover and lid of same make, with C.P. brass angle
cock as required of Jaguar or equiv fittings complete,
cutting and making good the walls and floors wherever
required. The job also includes the concealed laying of
½” GI water supply pipes from the nearest source
supply for flushing cistern and health faucet by the side,
connecting to main sewer line to be complete and
operational in all respects. Health faucet controlled C.P.
brass angle cock of Jaguar also to be provided by the
side.
Providing and fixing white vitreous china water closet
(IWC- Orissa pan- composite pan and leg rest) with 10
ltr low level matching ceramic flushing cistern with
fittings, C.I. / M.S. brackets 40 mm dia flush bend with
fittings and clamps, overflow arrangement with specials
and mosquito proof coupling of approved municipal
design complete including painting of fittings and
brackets, cutting and making good the walls and floors
Sft
Nos
Nos
Nos
534
2
2
2
10.
11.
12.
13.
14.
15.
16.
wherever required. The job also includes the concealed
laying of ½” GI water supply pipes from the nearest
source supply for flushing cistern and health faucet by
the side with C.P. brass angle cock as required of
Jaguar, connecting to main sewer line to be complete
and operational in all respects. Health faucet controlled
by C.P. brass angle cock of Jaguar also to be provided
by the side.
Providing and fixing white vitreous china squatting
urinal with fittings C.I/M.S brackets standard size C.P
brass flush pipe, spreaders with unions and clamps as
required complete. The job also includes the concealed
laying of ½” GI water supply pipes from the nearest
source supply for flushing urinal, connecting to main
sewer line to be complete and operational in all
respects. C.P. brass angle cock of Jaguar also to be
provided by the side for control of urinal flushing.
Supplying and fixing in position 15mm nominal bore
CP bib cock /wall cock /angle cock of Marc / Jaguar or
equivalent approved quality conforming to IS: 8931
Supplying and making brickwork in 1:5 cement mortar
including curing the same etc. complete as per drawing
and direction.
a) 125mm. thk.
Plastering in walls after removing damaged and cracked
plaster work at various heights and levels with cement
mortar 20mm thk in 1:6
Plaster-of-Paris punning topcoat application to a
smooth plum finish after removing any loose flakes etc.
necessary scaffolding, curing all as required complete.
Supply fitting & fixing of
a) CP brass towel rail (heavy duty as chosen)
complete with brackets fixed to wooden cleats with
CP brass screws. Screws concealed type. Kakkar,
Base or equiv.
b) CP brass robe hook (heavy duty as chosen)
complete with brackets fixed to wooden cleats with
CP brass screws. Screws concealed type. Kakkar,
Base or equiv.
c) Mirror 5mm thk., 2’0”x3’0”ht fitted with matt SS
studs in the ends as required.
d) Providing and fixing Kimberly-clark 2 chambered
liquid soap dispensers including soap etc complete.
Removing dry or oil bound distemper by scrapping,
sand papering and preparing the surface smooth
including necessary repairs to scratches etc. complete.
Primer one coat on timber, plastered or on steel or other
metal surface with synthetic enamel \ oil bound primer
Nos
Nos
Nos
Sft
Sft
Sft
Nos
Nos
Nos
Nos
1
1
4
10
60
150
2
2
2
2
of approved quality including smoothening surfaces by
sand papering etc.
Painting with best quality synthetic enamel paint of
approved make and brand including smoothening
surface by sand papering etc. including using of
approved putty etc. on the surface, if necessary
On timber or plastered surface:
Two or more coats inside building, any floor & any
height as directed.
Pantry Platform & Cabinet 11’x2’
Black Granite platform of size 11’x2’in straight or L
pattern of 2’8” height supported on 3”wide brick wall
partition as required at an interval of 2’-3’ as required
and instructed plastered and finished. A stainless steel
sink to be provided of size about 2’x1’7” of ‘Nirali’ or
‘Parryware’ make complete and operational in all
respects with drainpipe and long body bib cock of
‘Jaguar’ or ‘Mark’. A running cabinet to be made below
the platform made of ¾” BWP blockboard laminated
and finished with SS handles, auto hinges all complete
with one blockboard shelf in between. Inside painted
and finished with 2 or more coats of enamel paint.
TOTAL OF PART B
Sft
Rft
190
11
PART – C
SCHEDULE OF ITEMS ELECTRICAL WORK –Bank Of Baroda, Naihati Branch, 24 Pgs (N).
SL no Item Unit Qty Rate Amount
1. a)
b)
2. a)
b)
3. a)
b)
4
5.
6.
Supplying at site Philips FBS 470/ 236 D6 HF PW with
2 x PL-L36W CFL colour 'Cool’ or equivalent of other
approved companies in false ceiling.
Installation and commissioning of the above in false
ceiling.
Supplying at site Philips FBH022 2xPL-C/4P 18W EB
GR with 2x PL-C18W matching CFL lamp colour
'Cool’ or equivalent of other approved companies in
false ceiling.
Installation and commissioning of the above in false
ceiling.
Supplying at site Philips ‘Mirolta’ TMS 122 / 128 HF
with 1x ‘TL’5 28Watt tube light make Osram colour 82
or equivalent of other approved companies
Installation and commissioning of the above in false
ceiling/wall.
Supplying of single phase 230 volt. AC exhaust fan of
9” sweep and installation of the same on wall after
making the required opening, mending good the
damages done , including providing connection for
commissioning .(Crompton, Usha, Havells make) Also
supplying and fixing of aluminum louver shutter on
outer wall with necessary bolts and nuts for 12” sweep
exhaust fan.
Supply and laying testing & commissioning of 95 sq
mm. 4 core 1100V grade PVC insulated aluminium
armoured cable with necessary running copper earth
wire, shall be laid outdoor and indoor. The rate shall
include excavation of cable trenches for outdoor laying,
providing protection bricks above and below the cables
in underground trenches, filling sand, making civil
damages good, providing clamps, supports in wall,
floor, ceiling & connecting properly such as glanding,
termination, connection of cables including supply and
fitting of glands lugs, ferrules, drilling, taping, of gland
plate, connection to terminals, providing tapes,
marking, ferruling, dressing protection pipe, glands etc.
as required as per standard practice providing all
material etc as required.
a) laying outside
b) laying inside by socketing & clamping
Conceal wiring from main DB to UPS etc. by copper
armored cable 10 sq.mm. 4 core with necessary
socketing and clamping wall, floor, ceiling with
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
R ft
R ft
19
19
16
16
10
10
3
50
42
7.
8.
9.
10.
11.
12.
13.
14.
necessary running copper earth wire & connecting
properly such as above.
Conceal wiring from main to sub DB etc. by copper
armored cable 16 sq.mm. 2 core with necessary
socketing and clamping wall, floor, ceiling with
necessary running copper earth wire & connecting
properly such as above.
Concealed point wiring for AC etc. by 2x6 Sq mm ( 84
/ 0.3 ) and 1x2.5 Sq mm ( 36 / 0.25 ) copper wire with
necessary PVC conduict with necessary bent, tee, angle
properly fitting fixing at wall , floor, ceiling and
connecting as per standard practice.
Concealed point wiring for AC etc. by 2x4 Sq mm ( 56
/ 0.3 ) and 1x1.5 Sq mm ( 30 / 0.25 ) copper wire with
necessary PVC conduict with necessary bent, tee, angle
properly fitting fixing at wall , floor, ceiling and
connecting as per standard practice.
Concealed point wiring for 16 amps power points, sub
DB to switch boards etc. by 2x2.5 Sq mm ( 50 / 0.25 )
and 1x1 Sq mm ( 32 / 0.20 ) copper wire with necessary
PVC conduict with necessary bent, tee, angle properly
fitting fixing at wall , floor, ceiling and connecting as
per standard practice.
Concealed point wiring for lights, fans, 6amps power
points (both raw & ups ) etc. by 2x1.5 Sq mm ( 30 /
0.25 ) and 1x1 Sq mm ( 32 / 0.20 ) for earthing in PVC
conduits with necessary bent, tee, angle properly fitting
fixing at wall, floor, ceiling and connecting as per
standard practice including providing modular switches
( 2 squire fitting, 4 spotlight, 3 / 4 single tube as
feasible, 3 nos 6amps ups points per working top in
loop formation per circuit are required to be made and
to be considered per point ) to the satisfaction of
Architect.
Providing and fixing TPN main switch ( SDF) with box
and cover full complete set including HRC fuse all as
required including glandboxes etc (LT, MDS, Siemens
make) properly fitted by MS channel and connecting as
per standard practice.
a) 200 amp.
b) 100 amp.
Bus bar distribution panel-supply fixing and testing of
copper accepted standard sheet steel enclosure (dust
protected) Panel box of suitable size with phase
indicating lamps for T.P. distribution board of 440 volt.
50 Hz., 200 amp. Supply as is necessary as per standard
practice to the satisfaction of Architect/ Official.
Providing and placing in position main distribution box
having 6 nos D.P. MCB of 63 Amps each including
1nos 4 pole 100amps isolator of approved make with
R ft.
R ft
R ft
R ft
R ft
Nos.
Nos.
Nos.
Nos.
220
410
102
390
610
73
1
2
1
15.
16.
17.
18.
19.a)
b)
20.
21.
22.
Acrylic cover on top properly fitted by cutting wall and
mending good of damage portion connecting as per
standard practice.
Providing and placing in position sub distribution box
(8+2 )-way with 6 / 10 / 16 / 20 / 32 Amps S.P. MCB as
is required & 80Amps isolator of approved make with
Acrylic cover on top properly fitted by cutting wall and
mending good of damage portion connecting as per
standard practice.
Providing and placing in position 16 amp. 6-pin
moduler socket with separate switch including GI box,
covers plate etc., fitting properly by cutting wall and
mending good the damage portion and connecting
properly as per standard practice.
Providing and placing in position 6 amp. 5-pin socket
with separate switch including GI box, cover plate etc.
fitting properly by cutting wall and mending good the
damage portion and connecting properly as per standard
practice.
Providing and placing in position four pole change over
switch for generator of 100 amps on load, fitting
properly by cutting wall and mending good the damage
portion and connecting properly as per standard
practice.
Earthing
Providing, making, testing & connecting Earthing Pit as
per following details:
Earth pit 10’0” deep with 600x600x3mm copper plate
filled with charcoal and salt mixture, with copper strip
25x3mm in 1.5” dia GI pipe to be filled with bitumen
with holes and funnel for watering, connected with
copper bolts to the plate. The item includes making
brick masonry chamber on top with CI cover complete.
Providing and fixing copper strip 25x3mm from earth
pit to the mains panel and to the UPS DB. Including
clamping to wall, ceiling including making openings
wherever required and repairing the same afterwards
complete.
(earth resistivity should be less than 1 ohm )
Supply, fitting and fixing 16” sweep standard
oscillating wall mounted heavy duty fan with speed
control, ISI branded ( Crompton, Havells, ).
Supply fitting fixing of 32amp phase with neutral and
earth point, metal clad plug socket with 32 amp MCB
and neutral link in MS box all complete.
Supply, fitting, fixing, of modular telephone
information outlet with box, face plate all complete
along with supply, laying, fixing, pairing, termination
and commissioning of 0.5l mm, two pair telephone wire
Nos.
Nos.
Nos.
Nos.
Nos.
Job
Rft.
Nos.
Nos
2
5
6
60
1
2
130
13
4
23.
24.
25.
26.
as per DOT specification through PVC pipe above false
ceiling and partly concealed in wall, column / floor by
cutting chase as required and mending good damages.
(From telephone operator to each table indicated at the
drawing /direction )
Providing and placing in position Starter – AC power
unit with short circuit protection in sheet steel enclosure
with relay range from 11 to 18 to 25amps as required it
is to also include matching plug & socket in compact
set. Fitting properly by cutting wall and mending well
the damage portion and connecting properly as per
standard practice.
Supply, installation and commissioning of channel
music using false ceiling recess mounted, 5 / 6 watt
speaker, ring type, white colour of dia around 7.5” to be
fitted in the false ceiling as per drawing / direction of
Philips model no LBD 8351/10, Ahuja or equivalent
make. Along with wiring for the speakers using 1
sq.mm, 2 core multi stand with each core having 24
strands PVC sheathed copper signal wire in PVC
conduict with necessary accessories concealed in wall,
floor, ceiling etc. and connecting as per standard
practice at manager room, server room, and 2 at
customer lobby.
Dismantling existing wiring, light, fans, DB etc all as
required to facilitate renovation and taking away if not
required, also providing temporary lights, fans etc all as
required during the renovation period as necessary for
working.
Buyback and taking away all the old electrical fittings
and fixtures which are not required or getting newly
done and as decided by the consultant / bank.
(contractor to pay bank for buyback items in lumpsum)
TOTAL OF PART C
Nos
Nos
Nos
Job
LS
6
6
5