Ball Valve Seat and Seal Material Options · 2019. 12. 20. · Code Designation Valve Styles with...
Transcript of Ball Valve Seat and Seal Material Options · 2019. 12. 20. · Code Designation Valve Styles with...
Ball Valve Seat and Seal Material Options
© 2009 DVCC
ph: 800.789.1718 • 262.513.6900 fx: 800.789.4046 • 262.513.4904 dixonvalve.com
Printed in the USA BVSS709-inhouse
Dixon SanitaryN25 W23040 Paul Road • Pewaukee, WI 53072
Code Designation Valve Styles with Seat Options Material ApplicationsV Virgin PTFE BV2CV
BV3SV BV2NV
2-way encapsulated3-way encapsulated2-way non-encapsulated
VirginPolytetrafluoroethylene
100 % PTFE.Our standard seat material. Ideal for most sani-tary services. Specified for applications requiring a low co-efficient of friction. 3A and FDA approved.
G RTFE BV2CG BV3SG BV2NG
2-way encapsulated3-way encapsulated2-way non-encapsulated
15% Glass Reinforced Tetrafluoroethylene
15%GLASS FILLED+ 85%TFESlightly higher temperature and pressure rating than PTFE. Specified for applications requiring higher cycle life than PTFE. 3A and FDA approved.
C 25% carbon PTFE BV2CC BV3SC BV2NC
2-way encapsulated3-way encapsulated2-way non-encapsulated
25% Carbon ReinforcedTetrafluoroethylene
25%CARBON+75%TFESpecified for higher temperature pressure applications. Ideal for steam and thermal fluid applications. Higher cycle life than RTFE.
S stainless reinforced PTFE
BV2CS BV3SS BV2NS
2-way encapsulated3-way encapsulated2-way non-encapsulated
50% Stainless Steel Filled Tetrafluoroethylene
50%SS + 50%TFESpecified for higher temperature pressure ap-plications in a sanitary process.3A and FDA approved.
U UHMW BV2CU BV3SU BV2NU
2-way encapsulated3-way encapsulated2-way non-encapsulated
Ultra High Molecular Weight Polyethylene
Specified for its low modulus of abrasion and minimal property degradation when exposed to moderate levels of radiation. Ideal for applica-tions where fluorocarbons are not acceptable.3A and FDA approved.
Seat Material Temperature / Pressure Ratings