ABOUT YOUR INFINEA® TAB M for iPHONE 6 PLUS CHARGING STATION (1-Unit)

ASSEMBLY

Infinea® Tab M for iPhone 6 Plus

Charging Station(1-Unit)

QUICK START GUIDE

CHARGE STATUS TROUBLESHOOTING

Charging Pins

Cooling Vents

LED Indicator

Attachment for Infinea Tab M for iPhone 6 Plus

Mini USB Connector Mini USB Connector

Attachment for Infinea Tab M for iPhone 6 Plus with Rugged Case

Front View

Back View Back View

1. Place the charging station on a sturdy, clean and dry surface in an open, well-ventilated area away from direct sunlight.

2. Plug the included USB charge/sync cable into the mini USB connector port on the charging station. Then plug the USB connector into an appropriate external power supply.

3. Gently insert the bottom of the device into the charging bay, ensuring the unit is seated upright so that proper contact is made with the charging pins. The front of the device and the iOS screen should face toward the LED indicator on the charging station.

4. To remove the Infinea® Tab M for iPhone 6 Plus from the charging station, pull the device straight up and out of the charging bay.

Note: The Infinea Tab M for iPhone 6 Plus Charging Station (1-Unit) is designed specifically to charge the Infinea Tab M for iPhone 6 Plus (with or without Rugged Case).

The Infinea® Tab M for iPhone 6 Plus Charging Station (1-Unit) uses the following LEDs to indicate the charge status:

STATUS INDICATOR LEDS

Green Inserted device is fully charged or charging bay is empty.

Orange Charging in progress for inserted device.

The LED does not come on when the Infinea Tab M for iPhone 6 Plus is placed in the charger slot.

• Ensure that the USB cable is securely inserted into the USB port on the charging station and connected securely into an appropriate external power supply.

• Ensure the unit is seated properly in the charging bay

It takes an excessive amount of time to fully charge the battery.

• Verify ambient temperature meets the operating temperature requirements

Operating: 0° to 40°C (32F° – 104°F)

There are no accessories currently available for the Infinea Tab M for iPhone 6 Plus Charging Station (1-Unit). Please visit our website at ipcmobile.com, or contact your Infinite Peripherals (IPC) account representative, for additional information about our current and future product accessory offerings.

ACCESSORIES

Mobility Sales/Technical Center Infinite Peripherals, Inc. 17681 Mitchell NIrvine, CA 92614Toll-Free: (866) 278-7860 Office: (949) 222-0300

Headquarters/Main Warehouse Infinite Peripherals, Inc. 2312 Touhy Ave.Elk Grove Village, IL 60004 Toll-Free: (800) 278-7860 Office: (847) 818-1260Fax: (847) 818-1287

Infinea® is a registered trademark of Infinite Peripherals, Inc.

Technical Support Infinite Peripherals, Inc. 17681 Mitchell N Irvine, CA 92614Toll-Free: (866) 278-7860 Office: (949) 222-0300

Emailinfo@ipcmobile.com

Websiteipcmobile.com

•

Note: Box contents and part numbers may vary based on order configura-tion. iOS device and other additional items shown on this quick start guide may not be included.

Infinite Peripherals (IPC) does not warrant, and is not responsible for, any damage to the Infinea Tab M for iPhone 6 Plus Charging Station (1-Unit) (“Product”) as a result of liquid or solid particle intrusion into the Product or damage caused by dropping the Product. If a material or workmanship defect arises with regard to any IPC product, and a valid claim is received within the Warranty Period, IPC (at IPC’s sole discretion) will (1) repair the Product using new or refurbishedparts or (2) replace the Product with a new orrefurbished Product. For purposes of this limitedwarranty, “refurbished” means a product or partthat has been substantially returned to its originalspecifications. In the event of a defect, these areyour exclusive remedies.

QSG-10020 Rev. A

WARNINGS & CAUTIONSPlease observe the following precautions:

• Do not immerse the charger in water.• When not in use, store the charger in a cool

dry place.• Do not store or operate the charger near a

heat source.

• The charger should only be used for itsintended purpose.

• Do not cover cooling vents.• Device should only be repaired by IPC or an

authorized service facility.• Do not place any device not intended or

approved for use with the charging stationinto the charging bay. Contact with thecharging pins by any other device may causea short circuit in the charging station.

ADDITIONAL INFORMATIONPlease contact your Infinite Peripherals sales representative for technical specifications and additional product documentation.

WARRANTYPRODUCT RETURNSVist our online support center at http://ipcmobile. com/support/rma-support.html. Use the link provided to create an account and gain access to our Knowledge Base and online support services. Through our online support center, you’ll be able to download files, open a Support Ticket, manage your RMAs, view your account Profile and subscribe to Alerts.

To Request a RMA:

1. Create a user account in the RMA Support Portal at http://ipcmobile.com/support/rma/.

2. Login to your user account and click on the the “Open a New RMA” option.

3. Read the instructions provided and complete the online request form.

4. Note the assigned RMA number and write it clearly on your shipping carton.

5. Ship your equipment back to us at the address provided.