AUTOMATION - LD-Global Supply, LLC. · PDF file900sc-50-24 900sc-70 mechanic limit switch ......
Transcript of AUTOMATION - LD-Global Supply, LLC. · PDF file900sc-50-24 900sc-70 mechanic limit switch ......
A U T O M A T I O N
2011
AUT
OMA
TION
FOR
GATE
S AN
D DO
ORS
K E Y H O M E
K E Y I N D U S T R Y
10
intensive use magnetic limit switch 900SC-30CSM
900SC-40
mechanic limit switch
normal use 900SC-41CS
magnetic limit switch 900SC-41CSM
900SC-50
mechanic limit switch
normal use 900SC-51CS
magnetic limit switch 900SC-51CSM
900SC-71CSI
intensive use mechanic limit switch
900SC-50-24
900SC-70
mechanic limit switch
normal use 900SC-71CS
magnetic limit switch 900SC-71CSM
SYSTEMS FOR SLIDING GATES
TURBO 30FOR GATES UP TO 300 kg
TURBO KIT
TURBO 40FOR GATES UP TO 400 kg
TURBO KIT
TURBO 80FOR GATES UP TO 800 kg
TURBO KIT
TURBO 120FOR GATES UP TO 1200 kg
900SC-100
mechanic limit switch
normal use 900SC-101CS
magnetic limit switch 900SC-101CSM
TURBO 160FOR GATES UP TO 1600 kg
TURBO 250FOR GATES UP TO 2500 kg
TURBO 400FOR GATES UP TO 4000 kg
900SC-200CS
900SC-240normal use magnetic limit switch
900SC-204CS
900SC-244
normal use magnetic limit switch 900SC-400CS
KEY AUTOMATION | CATALOGUE 2011
G A T E S
12
PLUS
TURBO 30
GATES
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES UP TO 300 kg
CODE DESCRIPTION PCS PALLET
900SC-30CSM 24 Vdc motor, control unitwith slowdown, encoder,magnetic limit switch,for gates up to 300 kg.With connectors for receiver.Intensive use.
36
900SC-30CSMcontrol unit 900CT-24M
power Vac (Vdc) 230 (24)
consumption power W 120
motor consumption A 5
protection degree IP 54
torque Nm 10
speed m/s 0,20
thrust force N 300
max gate weight kg 300
insulation class 1
temporary service % 80
working temperature °C -20° +70°
weight kg 10,5
SYSTEMS FOR SLIDING GATES
With slowdown function in both opening and closing to preserveyour gate integrity.
Conceived to carry intensive use and harsh working conditions.
Electronic and mechanical parts well protected from external agents.
Easy maintenance thanks to the horizontal control unit position.
With magnetic encoder for detecting obstacles with maximum safety.
With fi xing plate included.
TURBO 30
G A T E S
KEY AUTOMATION | CATALOGUE 2011
253
240
138170,5
81
170,5
13
900CREM-12M4 iron toothed rack 30x12 mm L=1000 mm.
900CREM-8M4 iron toothed rack 30x8 mm L=1000 mm.
900TSWarning board.
key switch
photocell
post
fl ashing light
gear motor
ACCESSORIES
900CREM-PM4 nylon toothed rack L=1000 mm for gatesup to max 400 kg.
300BAT-12Battery 12 V 1.2 A.
900CABAT-30Battery charger for 24 Vdc motors.
14
TURBO 40
GATES
PLUS
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES UP TO 400 kg
CODE DESCRIPTION PCS PALLET
900SC-40 230 Vac motor, without control unit, with mechanic limit switch,for gates up to 400 kg.
36
900SC-41CS 230 Vac motor, control unit with slowdown, encoder, mechanic limit switch, for gates up to 400 kg.With connectors for receiver.
36
900SC-41CSM 230 Vac motor, control unit with slowdown, encoder, magnetic limit switch, for gates up to 400 kg.With connectors for receiver.
36
900SC-40 900SC-41CS 900SC-41CSM control unit - 900CT-101 900CT-101
power Vac (Vdc) 230 230 230
consumption power W 300 300 300
motor consumption A 1,3 1,3 1,3
capacitor μF 12,5 12,5 12,5
protection degree IP 44 44 44
torque Nm 16 16 16
speed m/s 0,16 0,16 0,16
thrust force N 400 400 400
max gate weight kg 400 400 400
thermoprotection °C 150° 150° 150°
insulation class 1 1 1
temporary service % 30 30 30
working temperature °C -20° +70° -20° +70° -20° +70°
weight kg 12 12 12
TURBO 40
With slowdown function in both opening and closing to preserveyour gate integrity.
Electronic and mechanical parts well protected from external agents.
Easy maintenance thanks to the horizontal control unit position.
With magnetic encoder for detecting obstacles with maximum safety.
One control unit suitable for all 230 Vac motors.
With fi xing plate included.
SYSTEMS FOR SLIDING GATES G A T E S
KEY AUTOMATION | CATALOGUE 2011
184
95
260
320
15
900CREM-8M4 iron toothed rack 30x8 mm L=1000 mm.
900TSWarning board.
ACCESSORIES
900CPHSC-50Rised fi xing plate.
900CREM-PM4 nylon toothed rack L=1000 mm for gatesup to max 400 kg.
900CREM-12M4 iron toothed rack 30x12 mm L=1000 mm.
key switch
photocell
post
fl ashing light
gear motor
16
TURBO 80
GATES
PLUS
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES UP TO 800 kg
CODE DESCRIPTION PCS PALLET
900SC-50 230 Vac motor, without control unit, with mechanic limit switch,for gates up to 800 kg.
36
900SC-51CS 230 Vac motor, control unitwith slowdown, encoder,mechanic limit switch,for gates up to 800 kg.With connectors for receiver.
36
900SC-51CSM 230 Vac motor, control unitwith slowdown, encoder,magnetic limit switch,for gates up to 800 kg.With connectors for receiver.
36
900SC-71CSI* 230 Vac motor, control unitwith slowdown, encoder, mechanic limit switch, for gates up to 800 kg.With connectors for receiver.Intensive use.
36
900SC-50-24* 24 Vdc motor, control unitwith slowdown, encoder, mechanic limit switch, for gates up to 600 kg.With connectors for receiver.Intensive use.
36
900SC-50 900SC-51CS 900SC-51CSM 900SC-71CSI 900SC-50-24control unit - 900CT-101 900CT-101 90CT-101 900CT-24SU
power Vac (Vdc) 230 230 230 230 230 (24)
consumption power W 450 450 450 360 150
motor consumption A 1,9 1,9 1,9 1,5 6
capacitor μF 16 16 16 12,5 -
protection degree IP 44 44 44 44 44
torque Nm 29 29 29 29 12
speed m/s 0,16 0,16 0,16 0,16 0,18
thrust force N 650 650 650 650 400
max gate weight kg 800 800 800 800 600
thermoprotection °C 150° 150° 150° 150° -
insulation class 1 1 1 1 1
temporary service % 30 30 30 60 80
working temperature °C -20° +70° -20° +70° -20° +70° -20° +70° -20° +70°
weight kg 12,5 12,5 12,5 13,5 12
TURBO 80
With slowdown function in both opening and closing to preserveyour gate integrity.
* Conceived to carry intensive use and harsh working conditions.
Electronic and mechanical parts well protected from external agents.
Easy maintenance thanks to the horizontal control unit position.
With magnetic encoder for detecting obstacles with maximum safety.
One control unit suitable for all 230 Vac motors.
With fi xing plate included.
SYSTEMS FOR SLIDING GATES G A T E S
KEY AUTOMATION | CATALOGUE 2011
184
95
260
320
17
900CREM-8M4 iron toothed rack 30x8 mm L=1000 mm.
900CPHSC-50Rised fi xing plate.
900CREM-12M4 iron toothed rack 30x12 mm L=1000 mm.
ACCESSORIES
900TSWarning board.
300BAT-12-2ABattery 12 V 1.2 A.
900BOXKEYPlastic box for two motors control unit.
900KITFIXBATKit fi xing batteries 24 Vfor 900BOXKEY.
900CABAT-30Battery charger for 24 Vdc motors.
key switch
photocell
post
fl ashing light
gear motor
18
TURBO 120
GATES
PLUS
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES UP TO 1200 kg
CODE DESCRIPTION PCS PALLET
900SC-70 230 Vac motor, without control unit, with mechanic limit switch,for gates up to 1200 kg.
36
900SC-71CS 230 Vac motor, control unitwith slowdown, encoder, mechanic limit switch, for gates up to 1200 kg. With connectors for receiver.
36
900SC-71CSM 230 Vac motor, control unitwith slowdown, encoder, magnetic limit switch, for gates up to 1200 kg.With connectors for receiver.
36
900SC-70 900SC-71CS 900SC-71CSMcontrol unit - 900CT-101 900CT-101
power Vac (Vdc) 230 230 230
consumption power W 600 600 600
motor consumption A 2,6 2,6 2,6
capacitor μF 20 20 20
protection degree IP 44 44 44
torque Nm 40 40 40
speed m/s 0,16 0,16 0,16
thrust force N 1000 1000 1000
max gate weight kg 1200 1200 1200
thermoprotection °C 150° 150° 150°
insulation class 1 1 1
temporary service % 30 30 30
working temperature °C -20° +70° -20° +70° -20° +70°
weight kg 13,5 13,5 13,5
TURBO 120
With slowdown function in both opening and closing to preserveyour gate integrity.
Electronic and mechanical parts well protected from external agents.
Easy maintenance thanks to the horizontal control unit position.
With magnetic encoder for detecting obstacles with maximum safety.
One control unit suitable for all 230 Vac motors.
With fi xing plate included.
SYSTEMS FOR SLIDING GATES G A T E S
KEY AUTOMATION | CATALOGUE 2011
184
95
260
320
19
900CREM-8M4 iron toothed rack 30x8 mm L=1000 mm.
900CREM-12M4 iron toothed rack 30x12 mm L=1000 mm.
ACCESSORIES
900CPHSC-50Rised fi xing plate.
900TSWarning board.
key switch
photocell
post
fl ashing light
gear motor
20
GATES
PLUS
A U T O M A T I O N
TECHNICAL DATA
TURBO 160ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES UP TO 1600 kg
CODE DESCRIPTION PCS PALLET
900SC-100 230 Vac motor, without control unit, with mechanic limit switch,for gates up to 1600 kg.
36
900SC-101CS 230 Vac motor, control unitwith slowdown, encoder, mechanic limit switch, for gates up to 1600 kg.With connectors for receiver.
36
900SC-101CSM 230 Vac motor, control unitwith slowdown, encoder, magnetic limit switch, for gates up to 1600 kg. With connectors for receiver.
36
900SC-100 900SC-101CS 900SC-101CSMcontrol unit - 900CT-101 900CT-101
power Vac (Vdc) 230 230 230
consumption power W 700 700 700
motor consumption A 3 3 3
capacitor μF 20 20 20
protection degree IP 44 44 44
torque Nm 40 40 40
speed m/s 0,16 0,16 0,16
thrust force N 1000 1000 1000
max gate weight kg 1600 1600 1600
thermoprotection °C 150° 150° 150°
insulation class 1 1 1
temporary service % 30 30 30
working temperature °C -20° +70° -20° +70° -20° +70°
weight kg 13,5 13,5 13,5
TURBO 160
With slowdown function in both opening and closing to preserveyour gate integrity.
Electronic and mechanical parts well protected from external agents.
Easy maintenance thanks to the horizontal control unit position.
With magnetic encoder for detecting obstacles with maximum safety.
One control unit suitable for all 230 Vac motors.
With fi xing plate included.
SYSTEMS FOR SLIDING GATES G A T E S
KEY AUTOMATION | CATALOGUE 2011
184
95
260
320
21
900CREM-12M4 iron toothed rack 30x12 mm L=1000 mm.
ACCESSORIES
900CPHSC-50Rised fi xing plate.
900TSWarning board.
key switch
photocell
post
fl ashing light
gear motor
22
TURBO 250
GATES
PLUS
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES UP TO 2500 kg
CODE DESCRIPTION PCS PALLET
900SC-240 400 Vac motor, without control unit, with magnetic limit switch,for gates up to 2500 kg. M6 pignon.
16
900SC-244 400 Vac motor, without control unit, with magnetic limit switch,for gates up to 2500 kg. M4 pignon.
16
900SC-200CS 230 Vac motor, control unit with slowdown, with magnetic limit switch, for gates up to 2500 kg.With connectors for receiver.M6 pignon.
16
900SC-204CS 230 Vac motor, control unitwith slowdown, with magneticlimit switch, for gates up to 2500 kg.With connectors for receiver.M4 pignon.
16
900SC-240 900SC-244 900SC-200CS 900SC-204CScontrol unit 900CT-380* 900CT-380* 900CT-101 900CT-101
power Vac (Vdc) 400 400 230 230
consumption power W 650 650 580 580
motor consumption A 1,5 1,5 4 4
capacitor μF - - 35 35
protection degree IP 44 44 44 44
torque Nm 63 63 57 57
speed m/s 0,175 0,175 0,175 0,175
thrust force N 1450 1450 1300 1300
max gate weight kg 2500 2500 2500 2500
thermoprotection °C 150° - 150° 150°
insulation class F F 1 1
temporary service % 50 50 40 40
working temperature °C -20° +70° -20° +70° -20° +70° -20° +70°
weight kg 15,5 15,5 16 16
* Suggested control unit.
TURBO 250
With slowdown function in both opening and closing to preserveyour gate integrity.
Electronic and mechanical parts well protected from external agents.
Easy maintenance thanks to the horizontal control unit position.
SYSTEMS FOR SLIDING GATES G A T E S
KEY AUTOMATION | CATALOGUE 2011
390
230
270
390
360
23
900CREM-30M6 iron toothed rack30x30 mm L=1000 mm.
900CREM-12M4 iron toothed rack 30x12 mm L=1000 mm.
900TSWarning board.
ACCESSORIES
key switch
photocell
post
fl ashing light
gear motor
24
TURBO 400
GATES
PLUS
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SLIDING GATES UP TO 4000 kg
CODE DESCRIPTION PCS PALLET
900SC-400CS 400 Vac motor, control unitwith slowdown, magnetic limit switch, for gates up to 4000 kg.With connectors for receiver.M6 pignon.
1
900SC-400CScontrol unit 900CT-380
power Vac (Vdc) 400
consumption power W 750
motor consumption A 2
protection degree IP 54
torque Nm 180
speed m/s 0,17
thrust force N 3500
max gate weight kg 4000
thermoprotection °C 150°
insulation class 1
temporary service % 50
working temperature °C -20° +70°
weight kg 37
TURBO 400
With slowdown function in both opening and closing to preserveyour gate integrity.
Electronic and mechanical parts well protected from external agents.
Easy maintenance thanks to the horizontal control unit position.
SYSTEMS FOR SLIDING GATES G A T E S
KEY AUTOMATION | CATALOGUE 2011
325
285470
560560
25
ACCESSORIES
900CREM-30M6 iron toothed rack30x30 mm L=1000 mm.
900TSWarning board.
key switch
photocell
post
fl ashing light
gear motor
A U T O M A T I O N26
GATES
TURBO KIT
PLUS
900SEL-M
FOR SLIDING GATES UP TO 300 kg
CODE DESCRIPTION PCS PALLET
900KIT-433* Kit for sliding gates up to 300 kg,24 Vdc motor, control unitwith slowdown, encoder andmagnetic limit switch.
36
* Kit available also in the rolling code version: 900KIT-433R.
900LUMY-24
900FT-31
900TS
900RXI-22
KIT COMPONENTS
900TXB-42
900SC-30CSM
With slowdown function in both opening and closing to preserveyour gate integrity.
Conceived to carry intensive use and harsh working conditions.
Electronic and mechanical parts well protected from external agents.
Easy maintenance thanks to the horizontal control unit position.
With magnetic encoder for detecting obstacles with maximum safety.
With fi xing plate included.
SYSTEMS FOR SLIDING GATES G A T E S
KEY AUTOMATION | CATALOGUE 2011
27
TURBO KIT
PLUS
900SEL-M
FOR SLIDING GATES FROM 400 TO 800 kg
CODE DESCRIPTION PCS PALLET
900KIT-433SL* Kit for sliding gatesup to 400 kg.230 Vac motor, control unitwith slowdown, encoderand mechanic limit switch.
36
900KIT-43324* Kit for sliding gatesup to 600 kg, 24 Vdc motor, control unit with slowdown, encoder and mechaniclimit switch.
36
900KIT-433SS* Kit for sliding gatesup to 800 kg, 230 Vac motor, control unit with slowdown, encoder and mechaniclimit switch.
36
* Kit available also in the rolling code version:900KIT-433SLR, 900KIT-43324R, 900KIT-433SSR.
900LUMY-24or
900LUMY-230
900FT-31
900TS
900RXI-22
KIT COMPONENTS
900TXB-42
900SC-41CS 400 kg
or
900SC-50-24 600 kg
or
900SC-51CS 800 kg
With slowdown function in both opening and closing to preserveyour gate integrity..
Electronic and mechanical parts well protected from external agents.
Easy maintenance thanks to the horizontal control unit position.
With magnetic encoder for detecting obstacles with maximum safety.
With fi xing plate included.
K E Y H O M E
28
STAR 200WITH LEAVES UP TO 2 m
STAR KIT
STAR 300WITH LEAVES UP TO 3 m
STAR KIT
STAR 500WITH LEAVES UP TO A 5 m
STAR KIT
MEWA 2GEAR MOTOR WITH ARTICULATED ARMS FOR SWING GATESWITH LEAVES UP TO 2 m
MEWA KIT 2
MEWAGEAR MOTOR WITH ARTICULATED ARMS FOR SWING GATESWITH LEAVES UP TO A 3 m
MEWA KIT
UNDERUNDERGROUND GEAR MOTORFOR SWING GATESWITH LEAVES UP TO 3 m
UNDER KIT
SYSTEMS FOR SWING GATES
intensive use 900PS-200
900PS-300FA
normal use
900PS-300FA-R
intensive use 900PS300-24FA
900PS-400FA
normal use
900PS-400FA-R
intensive use 900PS400-24FA
900SN-21
intensive use
900SN-21CS
normal use 900SN-50
intensive use 900SN-50-24
normal use 900INT
intensive use 900INT-24
G A T E S
KEY AUTOMATION | CATALOGUE 2011
30
PLUS
STAR 200
GATES
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SWING GATES WITH LEAVES UP TO 2 m
CODE DESCRIPTION PCS PALLET
900PS-200 For leaves up to 2 m, double irreversible gear motors (ds+sx)24 Vdc, with encoder and mechanic opening limit switch.
15
Opening mechanical limit switch, to controlyour gate movement.
Encoder available in the 24 Vdc version for the obstacle detection.
Slowdown and stroke control.
Mechanical parts well protected from external agents.
900PS-200control unit 900CT-824S*
power Vac 24
consumption power W 120
motor consumption A 5
protection degree IP 54
thrust force N 1400
temporary service % 80
shutter opening Max 90° / 120°
opening time at 90° sec 20
working temperature °C -20° +70°
weight kg cad 8,6
* Suggested control unit.
LIMITS USE
Gate’s shape and height and weather conditionscan considerably reducethe values shown above,in the graph. 230 Vac motors are suggestedfor windy areas.
SYSTEMS FOR SWING GATES
Max
gat
e w
eigh
t (kg
)
Max gate length (m)
1 2
400
200
STAR 200
G A T E S
KEY AUTOMATION | CATALOGUE 2011
177
646
115
31
900ELS-VVertical 12 V electrolock.
900ELS-0Horizontal 12 V electrolock.
900TSWarning board.
300BAT-12-2ABattery 12 V 2 A.
ACCESSORIES
post
control unit in box
gear motor
photocell
key switch
photocell
photocell
fl ashing light
900KITFIXBATKit fi xing batteries 24 V.
32
PLUS
STAR 300
GATES
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL GEAR MOTOR FOR SWING GATES WITH LEAVES UP TO 3 m
CODE DESCRIPTION PCS PALLET
900PS-300FA For leaves up to 3 m,irreversible 230 Vac motor,with mechanic openinglimit switch (1pc).
25
900PS-300FA-R For leaves up to 3 m,reversible 230 Vac motor,with mechanic openinglimit switch (1 pc).
25
900PS300-24FA For leaves up to 3 m,irreversible 24 Vdc motorwith encoder and mechanicopening limit switch (1 pc).
25
900PS-300FA 900PS-300FA-R 900PS300-24FAcontrol unit 900CT-2 / 900CT-201* 900CT-2 / 900CT-201* 900CT-824S*
power Vac (Vdc) 230 230 (24)
consumption power W 250 250 120
motor consumption A 1,1 1,1 5
capacitor μF 10 10 -
protection degree IP 44 44 44
thrust force N 1700 1300 1500
shutter opening Max 90° / 120° 90° / 120° 90° / 120°
temporary service % 30 30 80
thermoprotection °C 150° 150° -
opening time at 90° sec 23 19 20
working temperature °C -20° +70° -20° +70° -20° +70°
weight kg 8 8 8
* Suggested control unit.
LIMITS USE
Gate’s shape and height and weather conditionscan considerably reducethe values shown above,in the graph. 230 Vac motors are suggestedfor windy areas.
SYSTEMS FOR SWING GATES
Max
gat
e w
eigh
t (50
0 kg
)
Max gate length (3 m)
32 2,5
500
300
400
200
STAR 300
Opening mechanical limit switch, to controlyour gate movement.
Encoder available in the 24 Vdc version for the obstacle detection.
Double bearing on the main screw to grant robustness and movement fl uidity.
Possibility of battery integration in the 24 Vdc version.
Easy mechanical release.
Mechanical parts well protected from external agents.
G A T E S
KEY AUTOMATION | CATALOGUE 2011
390
110
108
460
890
33
900ELS-VVertical 12 V electrolock.
900STPOAVSRear welded bracket to be screwed.
900STANAVFront welded bracket to be screwed.
900ELS-0Horizontal 12 V electrolock.
900TSWarning board.
900FC-PSMechanical closing stop.
300BAT-12-2ABattery 12 V 2 A.
ACCESSORIES
900KITFIXBATKit fi xing batteries 24 V.
post
control unit in box
gear motor
photocell
key switch
photocell
photocell
fl ashing light
4,54 52 2,5 3 3,5
600
300
400
500
200
34
PLUS
STAR 500
GATES
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL GEAR MOTOR FOR SWING GATES WITH LEAVES UP TO 5 m
CODE DESCRIPTION PCS PALLET
900PS-400FA For leaves up to 5 m,irreversible 230 Vac motorwith opening limit switch (1pc).
25
900PS-400FA-R For leaves up to 5 m,reversible 230 Vac motorwith opening limit switch (1 pc).
25
900PS400-24FA For leaves up to 5 m,irreversible 24 Vdc motorwith encoder and openinglimit switch (1 pc).
25
900PS-400FA 900PS-400FA-R 900PS400-24FAcontrol unit 900CT-2 / 900CT-201* 900CT-2 / 900CT-201* 900CT-824S*
power Vac (Vdc) 230 230 (24)
consumption power W 250 250 120
motor consumption A 1,1 1,1 5
capacitor μF 10 10 -
protection degree IP 44 44 44
thrust force N 1700 1300 1500
shutter opening Max 90° / 120° 90° / 120° 90° / 120°
temporary service % 30 30 80
thermoprotection °C 150° 150° 150°
opening time at 90° sec 29 24 25
working temperature °C -20° +70° -20° +70° -20° +70°
weight kg 8 9 8,5
* Suggested control unit.
LIMITS USE
Gate’s shape and height and weather conditionscan considerably reducethe values shown above,in the graph. 230 Vac motors are suggestedfor windy areas.
SYSTEMS FOR SWING GATES
Max
gat
e w
eigh
t (kg
)
Max gate length (m)
STAR 500
Opening mechanical limit switch, to controlyour gate movement.
Encoder available in the 24 Vdc version for the obstacle detection.
Double bearing on the main screw to grant robustness and movement fl uidity.
Possibility of battery integration in the 24 Vdc version.
Easy mechanical release.
Mechanical parts well protected from external agents.
G A T E S
KEY AUTOMATION | CATALOGUE 2011
490
110
108
460
995
35
900ELS-VVertical 12 V electrolock.
900STPOAVSRear welded bracket to be screwed.
900STANAVFront welded bracket to be screwed.
900ELS-0Horizontal 12 V electrolock.
900FC-PSMechanical closing stop.
300BAT-12-2ABattery 12 V 2 A.
ACCESSORIES
900TSWarning board.
900KITFIXBATKit fi xing batteries 24 V.
post
control unit in box
gear motor
photocell
key switch
photocell
photocell
fl ashing light
Max. 200
570
1 1,5
250
200
36
PLUS
MEWA 2
GATES
400
300
800
A max
B max
D max
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR WITH ARTICULATED ARM FOR SWING GATES WITH LEAVES UP TO 2 m
CODE DESCRIPTION PCS PALLET
900SN-21 For leaves up to 2 m, 24 Vdc motor, without control unit, with encoder, opening and closing electric limit switch and external release.
30
900SN-21CS For leaves up to 2 m, 24 Vdc motor, control unit with slowdown,encoder, opening and closingelectric limit switch.With connectors for receiver.
30
900SN-21 900SN-21CScontrol unit - 900CT-824S
power Vdc 24 24
consumption power W 120 120
motor consumption A 5 5
protection degree IP 63 63
thrust force N 1200 1200
temporary service % 80 80
tempo di shutter opening sec 15 15
working temperature °C -20° +70° -20° +70°
weight kg 12,5 14
LIMITS USE
The shape, the height of the gate and the weather conditions can considerably reduce the values shown above, in the graph.
SYSTEMS FOR SWING GATES
Max
gat
e w
eigh
t (kg
)
Max gate length (m)
2
MEWA 2
With encoder: possibility of speed and slowdown regulation.
Max safety in the obstacle detection.
External release for an easy manual unlock from outside.
With slowdown, soft start and soft stop, to grant the product mechanicalparts integrity.
Mechanical parts and structure reinforced.
G A T E S
KEY AUTOMATION | CATALOGUE 2011
180
263
246
300
610
200
37
900ELS-VVertical 12 V electrolock.
900ELS-0Horizontal 12 V electrolock.
900TSWarning board.
300BAT-12-2ABattery 12 V 2 A.
ACCESSORIES
900KITFIXBATKit fi xing batteries 24 V.
post
gear motor
photocell
key switch
photocell
photocell
fl ashing light
SN50
SN50-24
32 2,5
800700
300400500600
200
38
PLUS
MEWA
GATES
400
300
800
A max
B max
D max
A U T O M A T I O N
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR WITH ARTICULATED ARM FOR SWING GATES WITH LEAVES UP TO 3 m
CODE DESCRIPTION PCS PALLET
900SN-50 For leaves up to 3 m, 230 Vac motor, with opening and closingelectric limit switch.
36
900SN-50-24 For leaves up to 3 m, 24 Vdc motor, with encoder.
36
900SN-50 900SN-50-24control unit 900CT-2 / 900CT-201* 900CT-824S*
power Vac (Vdc) 230 (24)
consumption power W 340 120
motor consumption A 1,5 5
capacitor μF 12 -
protection degree IP 43 43
temporary service % 30 80
working temperature °C -20° +70° -20° +70°
weight kg 14 13,8
torque Nm 350 350
* Suggested control unit.
LIMITS USE
Gate’s shape and height and weather conditionscan considerably reducethe values shown above,in the graph. 230 Vac motors are suggestedfor windy areas.
SYSTEMS FOR SWING GATES
Max
gat
e w
eigh
t (kg
)
Max gate length (m)
MEWA
With encoder with the possibility of speedand slowdown regulation.
Max safety in the obstacle detection.
External release for an easy manual unlock from outside.
With slowdown, soft start and soft stop granting the product mechanicalparts integrity.
G A T E S
KEY AUTOMATION | CATALOGUE 2011
300
157
187 330
500 780
39
900ELS-VVertical 12 V electrolock.
900SBLEXTCable release kit.
900ELS-0Horizontal 12 V electrolock.
900BMETExternal metallic boxfor unlock, completewith start buttons.
900TSWarning board.
300BAT-12-2ABattery 12 V 2 A.
ACCESSORIES
articulated arms
900KITFIXBATKit fi xing batteries 24 V.
post
control unit in box
gear motor
photocell
key switch
photocell
photocell
fl ashing light
32 2,5
600
300
400
500
40
PLUS
UNDER
GATES
UNDER
A U T O M A T I O N
TECHNICAL DATA
UNDERGROUND ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SWING GATES WITH LEAVES UP TO 3 m
CODE DESCRIPTION PCS PALLET
900INT For leaves up to 3 m, 230 Vac motor, with opening and closinglimit switch (1pc).
36
900INT-24 For leaves up to 3 m, 24 Vdc motor, with encoder, opening and closing limit switch (1pc).
36
900CF Cataphoresis housing boxwith connecting leversand mechanical stop.
36
900CI Stainless steel housing box,with connecting leversand mechanical stop (1pc).
36
900CFSB Cataphoresis housing boxwith galvanized cover,without connecting levers.
36
900INT 900INT-24control unit 900CT-2 / 900CT-201* 900CT-824S*
power Vac (Vdc) 230 (24)
consumption power W 230 120
motor consumption A 1 5
capacitor μF 10 -
protection degree IP 67 67
torque Nm 300 250
shutter opening Max 108° 108°
temporary service % 30 80
thermoprotection °C 150° -
opening time sec 20 21
working temperature °C -20° +70° -20° +70°
weight kg 11 10,8
* Suggested control unit.
LIMITS USE
Gate’s shape and height and weather conditionscan considerably reducethe values shown above,in the graph. 230 Vac motors are suggestedfor windy areas.
SYSTEMS FOR SWING GATES
Max
gat
e w
eigh
t (kg
)
Max gate length (m)
With both opening and closing limit switch.
24 Vdc motor with encoder to provide big safetyin the obstacle detection.
New cataphoresis housing box.
With the possibility of speed and slowdown regulation.
G A T E S
KEY AUTOMATION | CATALOGUE 2011
63
300
160380
41
900ELS-VVertical 12 V electrolock.
900AP110Kit for over 110° opening.For max 3000 mm long leaf.
900ELS-0Horizontal 12 V electrolock.
ACCESSORIES
housing
gear motor
300BAT-12-2ABattery 12 V 2 A.
900SBLINTConnecting leverswith key.
900TSWarning board.
900KITFIXBATKit fi xing batteries 24 V.
post
control unit in boxphotocell
key switch
photocell
photocell
fl ashing light
A U T O M A T I O N42
GATES
PLUS
STAR KIT 200
900SEL-M
FOR SWING GATES UP TO 2 m
CODE DESCRIPTION PCS PALLET
900KIT-PS200* Kit for swing gates with leavesup to 2 m, 24 Vdc motor.Control unit with slowdown,encoder and mechaniclimit switch.
15
* Kit available also in the rolling code version: 900KIT-PS200R.
900LUMY-24
900FT-31 900RXI-22
900TXB-42
900PS-200 (2 PCS)
Opening mechanical limit switch to controlyour gate movement.
With encoder for the obstacle detection.
Slowdown and stroke control.
Mechanical parts well protected from external agents.
KIT COMPONENTS
SYSTEMS FOR SWING GATES G A T E S
KEY AUTOMATION | CATALOGUE 2011
43
STAR KIT 300
PLUS
900SEL-M
FOR SWING GATES UP TO 3 m
900LUMY-230or
900LUMY-24
900FT-31
900CT-201 (230 Vac)
or
900CT-824S (24 Vdc)
900TS
900RXI-22
900TXB-42
(2 PCS)
or
900PS300-24FA (2 PCS)
Opening mechanical limit switch to controlyour gate movement.
Encoder available in the 24 Vdc version for the obstacle detection.
Double bearing on the main screw to grant robustness and movement fl uidity.
Possibility of battery integration in the 24 Vdc version.
Easy mechanical release.
Mechanical parts well protected from external agents.
CODE DESCRIPTION PCS PALLET
900KIT-PS301* Kit for swing gates with leaves up to 3 m, 230 Vac motor. Control unit with slowdownand opening mechaniclimit switch.
15
900KIT-PS324* Kit for swing gates with leaves up to 3 m, 24 Vdc motor.Control unit with slowdownand opening mechaniclimit switch.
36
* Kit available also in the rolling code version:900KIT-PS301R e 900KIT-PS324R.
KIT COMPONENTS
A U T O M A T I O N44
GATES
MEWA 2 KIT
PLUS
FOR SWING GATES UP TO 2 m
CODE DESCRIPTION PCS PALLET
900KIT2-433SN* Kit for swing gates with leavesup to 2 m, 24 Vdc motor.Control unit with encoderand opening and closingelectric limit switch.
15
* Kit available also in the rolling code version: 900KIT2433SNR.
900SN-21 (1 PC)
900SN-21CS (1 PC)
900SEL-M
900FT-31
900LUMY-24
900RXI-22
900TXB-42
With encoder: possibility of speedand slowdown regulation.
Max safety in the obstacle detection.
External release for an easy manual unlock from outside.
With slowdown, soft start and soft stop, to grant the product mechanicalparts integrity.
Mechanical parts and structure reinforced.
KIT COMPONENTS
SYSTEMS FOR SWING GATES G A T E S
45
MEWA KIT
PLUS
FOR SWING GATES UP TO 3 m
CODE DESCRIPTION PCS PALLET
900KIT-SN51* Kit for swing gates with leaves up to 3 m, 230 Vac motor. Control unit with slowdown.
12
* Kit available also in the rolling code version: 900KIT-SN51R.
900SN-50 (2 PCS)
External release for an easy manual unlock from outside.
With slowdown, soft start and soft stop granting the product mechanicalparts integrity.
900LUMY-230
900CT-201
KIT COMPONENTS
900TS
900RXI-22
900TXB-42900SEL-M
900FT-31
KEY AUTOMATION | CATALOGUE 2011
46
GATES
UNDER KIT
PLUS
A U T O M A T I O N
900SEL-M
FOR SWING GATES UP TO 3 m
CODE DESCRIPTION PCS PALLET
900KIT-INT1* Underground kit for swing gateswith leaves up to 3 m,230 Vac motor.Control unit with slowdown.
9
* Kit available also in the rolling code version: 900KIT433INTR.
N.B. Kit doesn’t include housing.
900LUMY-230
900FT-31
900INT (2 PCS)
900CT-201
With both opening and closing limit switch.
Possibility of speed and slowdown regulation.
KIT COMPONENTS
900RXI-22
900TXB-42
SYSTEMS FOR SWING GATES
K E Y I N D U S T R Y
48
normal use 900BR4
900BR4-24
intensive use
900BR4-24KWith built-in fl ashing light
900BR-624
intensive use
900BR-624KWith built-in fl ashing light
ALT-PKE
900D-115
900DL-200
ALT 4ALT 4 KBARRIER UP TO 4 m
ALT 6ALT 6 KBARRIER UP TO 6 m
ALT-PKMMANUAL PARKINGSPACE BAR GUARD
ALT-PKSPARKING SPACE BAR GUARDWITH SOLAR PANELS
CITYREVERSIBLE ELECTROMECHANICAL RISING BOLLARD
ELECTROMECHANICAL BARRIERS
G A T E S
CATALOGUE 2011
50
ALT 4 K / ALT 6 K
GATES
PLUS
A U T O M A T I O N
TECHNICAL DATA
ELETTROMECHANICAL IRREVERSIBILE BARRIER WITH DOUBLE BUILT-IN FLASHING LIGHT FOR BAR FROM 4 TO 6 m.
CODE DESCRIPTION PCS PALLET
900BR4-24K 24 Vdc motor,with control unit in box,encoder, double built-inLED fl ashing light.Connector for receiver.For 4 m long barrier.
6
900BR-624K 24 Vdc motor,with control unit in box,encoder, double built-inLED fl ashing light.Connector for receiver.For 6 m long barrier.
6
900BR4-24K 900BR-624Kcontrol unit 900CT-24SBA 900CT-24SBA
power Vdc 24 24
consumption power W 150 150
motor rpm rpm 1200 1200
motor consumption A 6 6
capacitor μF - -
opening time sec 5 10
max bar length m 4 6
temporary service % 80 80
working temperature °C -20° +70° -20° +70°
weight kg 35 43
ALT 4 K / 6 K
On 6 m. model ALT has double spring to counter balance movementand make it more fl uent, without bumps.
Opening time 4,5-5 sec. for 4 m. model, 10 sec. for 6 m model.
Anti UV surface polishing to resist to hardestatmospheric agents.
Control unit easy to program and to extract.
ELECTROMECHANICAL BARRIERS G A T E S
KEY AUTOMATION | CATALOGUE 2011
320
845
1110
900BR-624K
400
830
1188
280
900BR4-24K
220
51
ACCESSORIES ALT 4 K
ACCESSORIES ALT 6 K
900AST4Alluminium tubular barL=4000 diam 60 mm,in case of strong wind.
900AST6Alluminium tubular barL=6000 diam 90 mm,in case of strong wind.
900AS-4Alluminium barL=4000 mmdi. 60x30 mm.
900AS6Alluminium barL=6000 mmdi. 100x40 mm.
900CP-BRAnchorage platewith rag bolts.
900CP-BR6Anchorage platewith rag bolts.
900ATAST60Connection for round bardiam. 60 mm.
900ATAST90Connection for round bardiam. 90 mm.
900PROFFlexible rubber profi le,8 m and plug setfor 900AS-4.
900PROF6Flexible rubber profi le,12 m and plug setfor 900AS6.
photocell
key switch
photocell
photocell
post
gear moror for barrier
fl ashing light
bar
52
ALT 4 / ALT 6
GATES
PLUS
A U T O M A T I O N
TECHNICAL DATA
ELETTROMECHANICAL IRREVERSIBILE BARRIER FOR BARFROM 4 TO 6 m
CODE DESCRIPTION PCS PALLET
900BR4 230 Vac motor, with control unitin box. Connector for receiver.For 4 m long barrier.
6
900BR4-24 24 Vac motor, with control unitin box and encoder.Connector for receiver.For 4 m long barrier.
6
900BR-624 24 Vac motor, with control unitin box and encoder.Connector for receiver.For 6 m long barrier.
6
900BR4 900BR4-24 900BR-624control unit 900CT-101 900CT-24SBA 900CT-24SBA
power Vac (Vdc) 230 (24) (24)
consumption power W 155 150 150
motor rpm rpm 1400 1200 1200
motor consumption A 0,67 6 6
capacitor μF 8 - -
opening time sec 4,5 5 10
max bar length m 4 4 6
temporary service % 60 80 80
working temperature °C -20° +70° -20° +70° -20° +70°
weight kg 35 35 43
ALT 4 / 6
On 6 m. model ALT has double spring to counter balance movementand make it more fl uent, without bumps.
Opening time 4,5-5 sec. for 4 m. model, 10 sec. for 6 m model.
Anti UV surface polishing to resist to hardestatmospheric agents.
Control unit easy to program and to extract.
ELECTROMECHANICAL BARRIERS G A T E S
KEY AUTOMATION | CATALOGUE 2011
900BR-624
400
8301051
280
900BR4900BR4-24
320
8451000
220
53
ACCESSORIES ALT 4
ACCESSORIES ALT 6
900AST4Alluminium tubular barL=4000 diam 60 mm,in case of strong wind.
900AS-4Alluminium barL=4000 mmdi. 60x30 mm.
900CP-BRAnchorage platewith rag bolts.
900ATAST60Connection for round bardiam. 60 mm.
900PROFFlexible rubber profi le,8 m and plug setfor 900AS-4.
900AST6Alluminium tubular barL=6000 diam 90 mm,in case of strong wind.
900AS6Alluminium barL=6000 mmdi. 100x40 mm.
900CP-BR6Anchorage platewith rag bolts.
900ATAST90Connection for round bardiam. 90 mm.
900PROF6Flexible rubber profi le,12 m and plug setfor 900AS6.
photocell
key switch
photocell
photocell
post
gear moror for barrier
fl ashing light
bar
A U T O M A T I O N54
GATES
ALT4 K-ALT6 K / ALT 4-ALT 6
300BAT-12Battery 12 V 1.2 A.
900RIMADouble-channeldetection loop.
900KLIGHTKit lights (4 pcs).
900CT-LIGHTControl unit for 900KLIGHT.
900APMMobile supports.
900ADRed refl ecting adhesive stripes (10 pcs).
900TSWarning board.
900SKIRTKit alluminium fence,length 2 m.
900CABAT-30Battery charger for 24 Vdc motors.
900APFFixed supports.
ELECTROMECHANICAL BARRIERS
COMMON ACCESSORIES
900KITFIXBATKit fi xing batteries 24 V.
G A T E S
KEY AUTOMATION | CATALOGUE 2011
320
310 320
550
350
65 Ø 50
460
40
15060
475
290
250
330
55
ALT PARK
ALT-PKS
ALT-PKM
PLUS
MANUAL AND WITH SOLAR PANEL PARKINGSPACE BAR GUARD
ACCESSORIES
Easy to install and place. No need any electrical connections,(battery pack with complete autonomy for more than 1 year).
Supplied with battery and charger.
With obstacle detection.
900TXB-44R4 channels rolling code transmiter. 433.92 MHz.
TECHNICAL DATA900ALT-PKS 900ALT-PKM
motor power Vdc 6 -
consumption power W 9 -
motor consumption A 1 -
opening speed m/s 6 -
protection degree IP 54 -
weight kg 12 2,7
ALT PARK
CODE DESCRIPTION PCS PALLET
900ALT-PKM Manual parking spacebar guard.
1
900ALT-PKS 6 Vdc irreversible motorwith fi xing plate containing battery pack and photovoltaic cells; manual release,battery charger,r. code transmitter.
1
56
CITY
DL-200D-115
GATES
PLUS
A U T O M A T I O N
REVERSIBLE ELECTROMECHANICAL RISING BOLLARDWITH GREASE GEAR MOTOR
CODE DESCRIPTION PCS PALLET
900D-115 230 Vac electromechanicalrising bollard. Opening time 6 sec.500 mm H, 115 mm Diam.5,5 mm depth.
1
900DL-200 230 Vac electromechanicalrising bollard. Opening time 6 sec. Including 24 Vdc LED lighting kit.Height 700 mm, diam 200 mm,depth 5,5 mm.
1
Slowdown and limit switch.
Refl ecting stripe.
LED lights.
NEMKO certifi cation.
TECHNICAL DATA900D-115 900DL-200
control unit 900CT-D100* 900CT-D100*
diametre mm 115 200
heigth above ground mm 500 700
material ghisa ghisa
thickness (bollard head) mm 5,5 5,5
break-through resistant J 70.000 250.000
weight kg 65 80
* Suggested control unit.
CITY
ELECTROMECHANICAL BARRIERS G A T E S
KEY AUTOMATION | CATALOGUE 2011
300 360
360250
965 1180
1455
115115
490
700
Ø 194
Ø 115
Ø 190 Ø 273
57
ACCESSORIES
900TWITower totem to fi t all electronic equipments, pre-set for circular installation of LED lightsin the upper part.
900SMFRTraffi c light withred-green light.
900RIMADouble channel detection loop.
900CT-D100Control board for 900D-115and 900DL-200.
900TWLLight system for900TWI and 900TWS.
post
control unit in box
rising bollard
traffi c lights
photocell
fl ashing light
900TWSUpper totem for centralized technical control of urban accesses rising bollards. Pre-set for circular ionstallationof led lights.
60
K E Y I N D U S T R Y
SHARP230 VacELECTROMECHANICALGEAR MOTORFOR ROLLING SHUTTERS
SYSTEMS FOR ROLLING SHUTTERS
without electro-brake 900SW4/200Eshaft Ø 48-60 mm,rim 200-220 mm,weight up to 130 kg
with electro-brake 900SW4/200EFE
without electro-brake 900SW6/200Eshaft Ø 48-60 mm,rim 200-220 mm,weight up to 180 kg
with electro-brake 900SW6/200EFE
D O O R S
KEY AUTOMATION CATALOGUE 2011
DOORS
A U T O M A T I O N62
SHARP
PLUS
TECHNICAL DATA
ELECTROMECHANICAL GEAR MOTORFOR ROLLING SHUTTERS
900SW4/200E 900SW4/200EFE 900SW6/200E 900SW6/200EFEpower Vac 230 230 230 230
strength A 1,9 1,9 2,2 2,2
motor consumption W 250 250 400 400
capacitor μF 18 18 18 18
motor rim speed rpm 10 10 10 10
weigth kg 6,8 7 8,8 9
working temperature °C -20° +80° -20° +80° -20° +80° -20° +80°
max gear stroke m 6 6 6 6
thermoprotection °C 150 150 150 150
CODE DESCRIPTION PSC PALLET
900SW4/200E* 230 Vac reversible gear motorfor shutters up to 130 kg,for diam 60/48 mm shaft,rim diam 200/220 mm.
30
900SW4/200EFE* 230 Vac irreversible gear motorfor shutters up to 130 kg,for diam 60/48 mm shaft,rim diam 200/220 mm.With electro-brake.
30
900SW6/200E* 230 Vac reversible gear motorfor shutters up to 180 kg,for diam 60/48 shaft,rim diam 200/220 mm.
30
900SW6/200EFE* 230 Vac irreversible gear motorfor shutters up to 180 kg,for diam 60/48 shaft,rim diam 200/220 mm.With electro-brake.
30
* For these motors control board suggested is the 900CT-SWEXT.
SHARP
Simple installation and high reliability.
Rim covered by plastic: reduce the moving noise and do not damagethe external rolling shutter surface.
SYSTEMS FOR ROLLING SHUTTERS D O O R S
KEY AUTOMATION | CATALOGUE 2011
900SW4 - 900SW6/200
60
390
70
320
50
200
63
900SW-EFEElectro-brakewith release.
900SEL-MAluminum outdoorkey selector.
900BMETExternal metallic boxfor motor release,complete with start button.
900TSWarning board.
900CT-SWEXTControl unit for rolling shuttersmax 800 W 230 Vac,with connectors for receiver
900ADAT-SW42ETwo adaptors for60 and 42 mm shaft.
ACCESSORIES
control unit box
gear motor
photocells
key switch
release
fl ashing light
900RXI-22Universal receiver,2 channels, fi x or rolling code, with 400 codes.
64
K E Y I N D U S T R Y
SYSTEMS FOR INDUSTRIAL DOORS
UPELECTROMECHANICALIRREVERSIBLE GEAR MOTORWITH STRAIGHT TELESCOPICARM FOR FOLDINGSWING DOORS
CUBESIDE ELECTROMECHANICAL GEAR MOTOR FOR INDUSTRIAL SECTIONAL GATESUP TO 16 sqm
normal use 900SN-50B
intensive use 900SN-50-24B
normal use 900SEZ16
D O O R S
CATALOGUE 2011
DOORS
A U T O M A T I O N66
UP
PLUS
TECHNICAL DATA
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTORWITH STRAIGHT TELESCOPIC ARM FOR FOLDING SWING DOORS
900SN-50B 900SN-50-24Bcontrol unit 900CT-201 / 900CT-2* 900CT-824S*
power Vac (Vdc) 230 (24)
motor consumption W 340 340
torque Nm 350 350
motor consumption A 1,5 6
capacitor μF 12 -
protection degree IP 43 43
working temperature °C -20° +70° -20° +70°
max leaf lenght m 1,5+1,5 1,5+1,5
weight kg 14 13,8
* Suggested control unit.
CODE DESCRIPTION PSC PALLET
900SN-50B 230 Vac motor, with openingand closing limit switch.Telescopic arm included.
18
900SN-50-24B 24 Vdc motor with encoder.Telescopic arm included.
18
UP
24 Vdc motor is provided with encoderand speed regulation.
Max safety in the obstacle detection.
External release, for an easy manual movement.
SYSTEMS FOR INDUSTRIAL DOORS D O O R S
KEY AUTOMATION | CATALOGUE 2011
187330
157
67
900TSWarning board.
900SBCLBDistance manual unlocking L=6000 mm.
900BMETExternal metallic boxfor motor release completewith start button.
ACCESSORIES
fl ashing light
box control unit
gear motor
release
photocell
post
telescopic arm
300BAT-12-2ABattery 12 V 2 A.
900KITFIXBATKit fi xing batteries 24 V.
DOORS
A U T O M A T I O N68
CUBE
PLUS
TECHNICAL DATA
SIDE ELECTROMECHANICAL GEAR MOTORFOR INDUSTRIAL SECTIONAL DOORS UP TO 16 sqm
CODE DESCRIPTION PSC PALLET
900SEZ16 230 Vac gear motor,for sectional industrial doorsup to 16 sqm, with emergencychain release system.Fixing plate included.
36
900SEZ16control unit CT-101B*
power V / Hz 230±10% / 50
consumption power W 350
motor consumption A 2
motor speed rpm 1400
torque Nm 30
shaft diameter mm 25,4
turn rpm 32
temporary service % 30
thermoprotection °C 120°
working temperature °C -20° +40°
motor weight kg 12
* Suggested control unit.
CUBE
For industrial sectional doors up to 16 sqm.
With chain release.
Micro switches for slowdown detection.
SYSTEMS FOR INDUSTRIAL DOORS D O O R S
KEY AUTOMATION | CATALOGUE 2011
900SEZ16 10090
Ø 25,4
230
265350
69
ACCESSORIES
control unit box
gear motor
photocells
fl ashing light
release
900TSWarning board.
900CT-101BControl unit with boxand transformer.
70
K E Y H O M E
SYSTEMS FOR OVERHEAD AND SECTIONAL DOORS
BLINDOGEAR MOTOR FOR SPRINGOR COUNTERWEIGHT OVERHEAD DOORS UP TO 9 sqm
BLINDO KIT
VIPERGEAR MOTOR FOR OVERHEAD DOORS UP TO 10 sqmAND SECTIONAL DOORSUP TO 12 sqm
VIPER KIT
900BS-50
normal use
900BS-51CS
intensive use 900BS-50-24
900SEZ-700
intensive use
900SEZ-1200
D O O R S
KEY AUTOMATION | CATALOGUE 2011
DOORS
A U T O M A T I O N72
BLINDO
PLUS
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR SPRINGOR COUNTERWEIGHT OVERHEAD DOORS UP TO 9 sqm
CODE DESCRIPTION PSC PALLET
900BS-50 230 Vac motor, withoutcontrol unit, with openingand closing limit switch.With internal releasesystem and pre setfor unlocking from outside.
40
900BS-51CS 230 Vac motor, with controlunit and slowdown,with opening and closinglimit switch. With internalrelease system and pre setfor unlocking from outside.With connectors for receiver.
40
900BS-50-24 24 Vdc motor, with control unit,with encoder and slowdown.With release system and pre setfor unlocking from outside.With connectors for receiver.
40
900BS-50 900BS-51CS 900BS-50-24control unit - 900CT-101 900CT-24SU
power Vac (Vdc) 230 230 (24)
consumption power W 340 340 150
motor consumption A 1,5 1,5 6
capacitor μF 12,5 12,5 -
protection degree IP 43 43 43
speed m/s 0,76 0,76 0,80
torque Nm 350 350 350
max door size m2 9 9 9
insulation class 1 1 1
temporary service % 30 30 80
working temperature °C -20° +70° -20° +70° -20° +70°
weight kg 14 14 13,8
BLINDO
230 Vac motor, with pre-installed opening and closing limit switch.
24 Vdc motor with encoder provides big safety inthe obstacle detection.
External release for an easy manual unlockfrom outside.
With slowdown, soft start and soft stop granting doors integrity.
SYSTEMS FOR OVERHEAD AND SECTIONAL DOORS
TECHNICAL DATAUTILISATIONS LIMIT
Values here above are validif motor is used with standard accessories.
2,5
2,2
Projecting up-and-over
door
Non projecting up-and-over
door
Leaf
max
hei
ght (
m)
D O O R S
665 580
140
140
73
KEY AUTOMATION | CATALOGUE 2011
key selector
photocell
rubber safety bar
gear motor
fl ashing light
900BD (1 pcs)
Straight telescopic arm.
900ST-650 (1 pcs)
Motor support bracket L=650 mm.
900BCNS (2 pcs)
Curved telescopic armwith driller round barto avoid welding pipes.
900BCBOC (2 pcs)
Curved telescopic armwith welded bushing.
900BC (1 pcs)
Standard curvedtelescopic arm.
900BDNS (1 pcs)
Straight telescopic arm with driller round barto avoid welding pipes.
900SBCOExternal unlocking system(to be applied on handle lock) L=3000 mm.
900BOC (1 pcs)
Bushing.
900TZ-2000 (2 pcs)
2000 mm long drive shaft, complete with supports.
900TZ-1500 (2 pcs)
1500 mm long drive shaft, complete with supports.
900ST-1800 (1 pcs)
Motor support bracketL = 1800 mm.
900ST-1600 (1 pcs)
Motor support bracketL=1600 mm.
900CABAT-30Battery chargerfor 24 Vdc motors.
900SBLSTKit for unlocking withkey ratchet and metal cord.
300BAT-12Battery 12 V 1,2 A.
900TSWarning board.
ACCESSORIES
DOORS
A U T O M A T I O N74
VIPER
PLUS
ELECTROMECHANICAL IRREVERSIBLE GEAR MOTOR FOR OVERHEAD DOORS UP TO 10 sqm AND SECTIONAL DOORS UP TO 12 sqm
CODE DESCRIPTION PSC PALLET
900SEZ-700 For overhead doors up to 8 sqmand sectional doors up to 9 sqm. 24 Vdc motor with control unit,one channel receiver and encoder, 700 N. With possibility of selectingfi x or rolling code.
36
900SEZ-1200 For overhead doors up to 10 sqmand sectional doors up to 12 sqm.24 Vdc motor with control unit,one channel receiver and encoder, 1200 N. With possibility of selecting fi x or rolling code.
36
900GU3320 Pre assembled 3320 mm slide, complete with joint and chain.
-
900GU3 Pre assembled 3320 mm slide,in 3 pcs, complete with jointand chain.
-
900GU4000 Pre assembled 4000 mm slide, complete with joint and chain.
-
900SEZ-700 900SEZ-1200power Vdc 24 24
consumption power W 100 160
motor consumption A 4,16 6,66
protection degree IP 43 43
strenght N 700 1200
speed cm/s 11 11
stroke m 2,8 2,8
light V / W 25 (1x) E14 25 (1x) E14
max door size m2 9 12
temporary service % 60 60
working temperature °C -20° +70° -20° +70°
weight kg 10,5 11
TECHNICAL DATA VIPE
24 Vdc. motor with its low voltage offers full safety for residential use.
With encoder, control unit and 1 channel receiver included.
Possibility to select fi x or rolling code.
One or three pcs pre-assembled guide, comprehensive of joint with chain option.
Motor head adjustable.
SYSTEMS FOR OVERHEAD AND SECTIONAL DOORS
UTILISATIONS LIMIT
Projecting up-and-over
door
Non projecting
up-and-over door
Sectional
900SEZ-700
H = 2,4 m
L = 3 m
H = 2,7 m
L = 3 m
H = 2,5 m
L = 3,5 m
900SEZ-1200
H = 2,4 m
L = 4 m
H = 2,7 m
L = 4 m
H = 2,5 m
L = 5 m
KEY AUTOMATION | CATALOGUE 2011
D O O R S
35110
370
200
65
3120
75
900SBLSTKit for unlockingwith key ratchetand metal cord.
900BO-SEZSwinging armof counterweightoverhead doors.
900SBCOExternal unlocking system(to be applied on handle lock)L=3000 mm.
900TSWarning board.
rubber safety bar
photocell
fl ashing light
key switch
gear motor
ACCESSORIES
900KBPKBattery 12 V 1,2 A.and battery chargerfor 24 Vdc motor.
900STF-SEZKit for additional clamp.
DOORS
A U T O M A T I O N76
BLINDO KIT
PLUS
FOR OVERHEAD DOORS UP TO 9 smq
CODE DESCRIPTION PSC PALLET
900KIT-BL51* Kit for spring and counterweight overhead doors up to 9 sqm.230 Vac motor, control unitwith gradual departureand slowdown.
18+9
* Kit available also in the rolling code version: 900KIT-BL51R.
900FT-31
900ST-650
900TZ-1500 (2 PCS)
900BS-51CS 900LUMY-230
900BDNS (2 PCS)
900TXB-42
KIT COMPONENTS
230 Vac motor, with pre-installed opening and closing limit switch.
External release for an easy manual unlockfrom outside.
With slowdown, soft start and soft stop granting doors integrity.
SYSTEMS FOR OVERHEAD AND SECTIONAL DOORS
KEY AUTOMATION | CATALOGUE 2011
D O O R S
77
PLUS
VIPER KITFOR OVERHEAD DOORS UP TO 10 sqm AND SECTIONAL DOORSUP TO 12 sqm
900TXB-42900SEZ-700or
900SEZ-1200
with
900GU3
KIT COMPONENTS
CODE DESCRIPTION PSC PALLET
900KIT-433SEZ* Kit for overhead doors upto 8 sqm and sectional doors up to 9 sqm.24 Vdc motor, with chain movement and 3 pcs slide.
15
900KITSEZ1000* Kit for overhead doorsup to 10 sqm and sectional doors up to 12 sqm.24 Vdc motor, with chain movement and 3 pcs slide.
15
* Kit available also in the rooling code version: 900KIT433SEZR e 900KITSEZ100R.
24 Vdc. motor with its low voltage offers full safety for residential use.
With encoder, control unit and 1 channel receiver included.
Possibility to select fi x or rolling code.
One or three pcs pre-assembled guide, comprehensive of joint with chain option.
Motor head adjustable.
78
K E Y I N D U S T R Y
AUTOMATION FOR SLIDING DOORS
WINDAUTOMATION FOR ONE SLIDING DOOR 160 kg
WINDAUTOMATION FOR TWO SLIDING DOORS 130 + 130 kg
900PA151E900PA1901900PA2101900PA2501900PA2901900PA3301900PA3701900PA4201
900PA152E900PA1902900PA2102900PA2502900PA2902900PA3302900PA3702900PA4202
D O O R S
KEY AUTOMATION | CATALOGUE 2011
DOORS
A U T O M A T I O N80
WIND
PLUS
AUTOMATION FOR SLIDING DOORS
power supply 230 V 50/60 Hz
consumption max 120 W
accessories power 24 Vdc
electric lock voltage 12 Vdc V.mant.6 Vdc with Pid Control
battery charger charging voltage 27,5 Vdc I max=0,5° with control in current
electric motor 24 Vdc max power 100 W
opening / closing speed adjustable
emergency opening / closing speed adjustable
anti-crushing device standard
opening pause time adjustable from 0 to 90 sec.
operating temperature -10° + 80° C
traction typ toothed belt
The microprocessor control unit is equipped with connectors and terminalsfor the connection of:
mains power
motor power
cyclic counter
battery
electromechanical stop
function selector
auxiliary connections
serial connection RS485
operating status led
TECHNICAL DATA
CONTROL UNIT
WIND
Self-bearing cover for an easier inspection from outside.
External digital key pad to program, select, set-up functions withoutoperating on control unit.
Manual selector with knob for an easy standard functions selection.
AUTOMATION FOR SLIDING DOORS
KEY AUTOMATION | CATALOGUE 2011
14
11
81
13
9
8
7
4
12
61
2
10
5
3
D O O R S
PART IDENTIFICATION
1. 10 MICRON CHEMICAL SILVER OXIDIZED ALUMINIUM BAR AND 500 mm STEP CAPACITY
2. MECHANICAL STOP3. OXIDIZED ALUMINIUM BOX4. CARRIAGE5. ADAPTOR6. TRACTION BRACKETS7. GR63X55 24 Vdc MOTOR + SG8015 WL1 15.1 + ENCODER 12 IMP/REV DUNKER
8. EMERGENCY BATTERY UNIT9. CONTROL UNIT
10. ELECTROMECHANICAL STOP11. BELT12. TRANSMISSION PULLEY13. BOX SIDE PLUG14. DIGITAL SELECTOR WITH MICROPROCESSOR
WIND AUTOMATIONKey Doors are a new series of straight sliding hi-tech automatic systems for very intensive use, with high technical content and silent operation,characterized by a classy design. They offer many features mixed with quality and reliability and are easy to install and program.The traction unit and the electronic control panel in one unit reduce the assembly time. Moreover Key Doors offers solutions with appropriateanti-panic break-out devices allowing easy access to escape routes. The complete range offers solutions for all requirements of size, use and weight.
TECHNICAL FEATURESKey Doors are provided with a 24 Vdc motor, a microprocessor electronic control panel and an electronic impact-free device with encoder.Movement of the door and selection of functions are executed through the digital selector switch, without the need to have access to the control unit.The casing is made of aluminum extrusion and, thanks to a special locating hook system, there is the possibility to “hold open” the profi le coverwithout supporting it. Faults are displayed on the digital selector screen.
82
WIND
DOORS
900PA151E
AUTOMATION FOR ONE SLIDING DOOR UP TO 160 kg
CODE NOMINAL CLEARANCEROOM : mm
AUTOMATIONLENGTH : mm
900PA1901 900 1900
900PA2101 1000 2100
900PA2501 1200 2500
900PA2901 1400 2900
900PA3301 1600 3300
900PA3701 1800 3700
900PA4201 2000 4200
Assembled automation includes the following items for one mobile door:900PA151E, 900PA000, 900PA001, 900PA003, 900PA013, 900PA020, 900PA021, 900PA022, 900PA023, 900PA024.
PCS
motor with encoder 24 Vdc 1
kit door carriages 1 couple
electronic control unit 1
plug set 2
mechanic limit switch 2
kit accessories and screws for fi xing 1
Each component is packed separately and not assembled. If you need a custom-made and assembled door, please indicate the code of the ASSEMBLED AUTOMATION WITH DIGITAL EFUNCTION SELECTOR with the nearest size to the one you would like to receive and specify then the effective size of the automation to be ordered.N.B. Custom made automation doesn’t include digital selector(necessary for fi rst installation).
CUSTOM MADE AUTOMATION
ASSEMBLED AUTOMATION WITH DIGITAL FUNCTION SELECTOR
AUTOMATION FOR SLIDING DOORS
KEY AUTOMATION | CATALOGUE 2011
D O O R S
83
WIND
900PA152E
AUTOMATION FOR TWO SLIDING DOORS UP TO 130 + 130 kg
CODE NOMINAL CLEARANCEROOM : mm
AUTOMATIONLENGTH : mm
900PA1902 450 + 450 1900
900PA2102 500 + 500 2100
900PA2502 600 + 600 2500
900PA2902 700 + 700 2900
900PA3302 800 + 800 3300
900PA3702 900 + 900 3700
900PA4202 1000 + 1000 4200
Assembled automation includes the following items for two mobiles doors:900PA152E, 900PA000, 900PA001, 900PA003, 900PA013, 900PA020, 900PA021, 900PA022, 900PA023, 900PA024.
PCS
motor with encoder 24 Vdc 1
kit door carriages 2 couples
electronic control unit 1
plug set 2
mechanic limit switch 2
kit accessories and screws for fi xing 1
Each component is packed separately and not assembled.If you need a custom-made and assembled door, please indicate the codeof the ASSEMBLED AUTOMATION WITH DIGITAL FUNCTION SELECTOR withthe nearest size to the one you would like to receive and specify thenthe effective size of the automation to be ordered.N.B. Custom made automation doesn’t include digital selector(necessary for fi rst installation).
CUSTOM MADE AUTOMATION
ASSEMBLED AUTOMATION WITH DIGITAL FUNCTION SELECTOR
84
K E Y I N D U S T R Y
900PA151LE900PA1901L900PA2101L900PA2501L900PA2901L900PA3301L900PA3701L900PA4201L
900PA152LE900PA1902L900PA2102L900PA2502L900PA2902L900PA3302L900PA3702L900PA4202L
AUTOMATION FOR SLIDING DOORS
WIND LIGHTAUTOMATION FOR ONE SLIDING DOOR 120 kg
WIND LIGHTAUTOMATION FOR TWO SLIDING DOORS 80 + 80 kg
D O O R S
KEY AUTOMATION | CATALOGUE 2011
DOORS
A U T O M A T I O N86
WIND LIGHT
PLUS
AUTOMATION FOR SLIDING DOORS
power supply 230 V 50/60 Hz
consumption max 80 W
accessories power 24 Vdc
electric lock voltage 12 Vdc V.mant.6 Vdc with Pid Control
battery charger charging voltage 27,5 Vdc I max=0,5° with control in current
electric motor 24 Vdc max power 100 W
opening / closing speed adjustable
emergency opening / closing speed adjustable
anti-crushing device standard
opening pause time adjustable from 0 to 90 sec.
operating temperature -10° + 80° C
traction typ toothed belt
TECHNICAL DATA WIND LIGHT
Self-bearing cover for an easier inspection from outside.
External digital key pad to program, select, set-up functions withoutoperating on control unit.
Manual selector with knob for an easy standard functions selection.
AUTOMATION FOR SLIDING DOORS
The microprocessor control unit is equipped with connectors and terminalsfor the connection of:
mains power
motor power
cyclic counter
battery
electromechanical stop
function selector
auxiliary connections
serial connection RS485
operating status led
CONTROL UNIT
KEY AUTOMATION | CATALOGUE 2011
D O O R S
14
65
87
13
9
810
7
1
12
4
2
11
3
PART IDENTIFICATION
WIND LIGHT AUTOMATIONKey Doors are a new series of straight sliding hi-tech automatic systems for very intensive use, with high technical content and silent operation,characterized by a classy design. They offer many features mixed with quality and reliability and are easy to install and program.The traction unit and the electronic control panel in one unit reduce the assembly time. Moreover Key Doors offers solutions with appropriateanti-panic break-out devices allowing easy access to escape routes. The complete range offers solutions for all requirements of size, use and weight.
TECHNICAL FEATURESKey Doors are provided with a 24 Vdc motor, a microprocessor electronic control panel and an electronic impact-free device with encoder.Movement of the door and selection of functions are executed through the digital selector switch, without the need to have access to the control unit.The casing is made of aluminum extrusion and, thanks to a special locating hook system, there is the possibility to “hold open” the profi le coverwithout supporting it. Faults are displayed on the digital selector screen.
1. 10 MICRON CHEMICAL SILVER OXIDIZED ALUMINIUM BAR AND 500 mm STEP CAPACITY
2. MECHANICAL STOP3. OXIDIZED ALUMINIUM BOX4. CARRIAGE5. ADAPTOR6. TRACTION BRACKETS7. GR63X55 24 Vdc MOTOR + SG8015 WL1 15.1 + ENCODER 12 IMP/REV DUNKER
8. EMERGENCY BATTERY UNIT9. CONTROL UNIT
10. ELECTROMECHANICAL STOP11. BELT12. TRANSMISSION PULLEY13. BOX SIDE PLUG14. DIGITAL SELECTOR WITH MICROPROCESSOR
DOORS
88
WIND LIGHT
900PA151LE
AUTOMATION FOR ONE SLIDING DOOR UP TO 120 kg
CODE NOMINAL CLEARANCEROOM : mm
AUTOMATIONLENGTH : mm
900PA1901L 900 1900
900PA2101L 1000 2100
900PA2501L 1200 2500
900PA2901L 1400 2900
900PA3301L 1600 3300
900PA3701L 1800 3700
900PA4201L 2000 4200
Assembled automation includes the following items for one mobile door:900PA151LE, 900PA000L, 900PA001L, 900PA003, 900PA013, 900PA020, 900PA021, 900PA022L, 900PA023L, 900PA024.
PCS
motor with encoder 24 Vdc 1
kit door carriages 1 couple
electronic control unit 1
plug set 2
mechanic slowdown 2
kit accessories and screws for fi xing 1
Each component is packed separately and not assembled. If you need a custom-made and assembled door, please indicate the code of the ASSEMBLED AUTOMATION WITH DIGITAL FUNCTION SELECTOR with the nearest size to the one you would like to receive and specify then the effective size of the automation to be ordered.N.B. Custom made automation doesn’t include digital selector(necessary for fi rst installation).
CUSTOM MADE AUTOMATION
ASSEMBLED AUTOMATION WITH DIGITAL FUNCTION SELECTOR
AUTOMATION FOR SLIDING DOORS
KEY AUTOMATION | CATALOGUE 2011
D O O R S
89
WIND LIGHT
900PA152LE
AUTOMATION FOR TWO SLIDING DOORS UP TO 80 + 80 kg
CODE NOMINAL CLEARANCEROOM : mm
AUTOMATIONLENGTH : mm
900PA1902L 450 + 450 1900
900PA2102L 500 + 500 2100
900PA2502L 600 + 600 2500
900PA2902L 700 + 700 2900
900PA3302L 800 + 800 3300
900PA3702L 900 + 900 3700
900PA4202L 1000 + 1000 4200
Assembled automation includes the following items for two mobiles doors:900PA152LE, 900PA000L, 900PA001L, 900PA003, 900PA013, 900PA020, 900PA021, 900PA022L, 900PA023L, 900PA024.
PCS
motor with encoder 24 Vdc 1
kit door carriages 2 couples
electronic control unit 1
plug set 2
mechanic slowdown 2
kit accessories and screws for fi xing 1
Each component is packed separately and not assembled. If you needa custom-made and assembled door, please indicate the codeof the ASSEMBLED AUTOMATION WITH DIGITAL FUNCTION SELECTOR withthe nearest size to the one you would like to receive and specify thenthe effective size of the automation to be ordered.N.B. Custom made automation doesn’t include digital selector(necessary for fi rst installation).
CUSTOM MADE AUTOMATION
ASSEMBLED AUTOMATION WITH DIGITAL FUNCTION SELECTOR
A U T O M A T I O N90
WIND
DOORS
ELEMENTS
900PA022Emergency batterykit 12 V - 1,2A.
900PA023Electric lock kit set-upfor installation withcord release 900PA011.
900PA011Complete kit for manual release.
900PA000Anodized beanprofi le.
900PA001Anodized coverprofi le.
900PA020Upper adaptorprofi le.
900PA021Floor guidance nd track.
900PA024Plate with hingeand nylon block(1 pc).
900PA003Belt.
AUTOMATION FOR SLIDING DOORS D O O R S
KEY AUTOMATION | CATALOGUE 2011
91
WIND LIGHTELEMENTS
900PA000LAnodized beanprofi le.
900PA001LAnodized coverprofi le.
900PA020Upper adaptorprofi le.
900PA021Floor guidance nd track.
900PA022LEmergency batterykit 12 V - 1,2A.
900PA023LElectric lock kit set-upfor installation withcord release 900PA011L.
900PA011LComplete kit for manual release.
900PA003Belt.
900PA024Plate with hingeand nylon block(1 pc).
92
K E Y H O M E
900PBL
900PBM
900PBS
AUTOMATIONS FOR SWING DOORS
LEAFAUTOMATIONS FOR SWING DOORS 120 kg
LEAFAUTOMATIONS FOR SWING DOORS 250 kg
D O O R S
CATALOGUE 2011
DOORS
A U T O M A T I O N94
PLUS
LEAF
LEAF900PBL 900PBM 900PBS
power supply Vac 115/230 115/230 115/230
motor supply Vdc 24 with encoder 24 with encoder 24 with encoder
power W 120 120 120
intermittent work % intensive intensive intensivo
operating temperature °C -20° +50° -20° +50° -20° +50°
max weight wing kg 120 250 250
protection degree IP 32 32 32
TECHNICAL DATA
Available for light doors (120 kg) or heavy ones (250 kg).
With articulated arm in both “push” or “pull” movement option.
With push&go and disables access functions.
AUTOMATIONS FOR SWING DOORS
AUTOMATION FOR SWING DOORSFROM 120 TO 250 kg
KEY AUTOMATION | CATALOGUE 2011
D O O R S
95
6 21
5 4 3 7
PART IDENTIFICATION
1. LOGIC CARD2. CONTROL UNIT3. SPRING (MODELS 900PBL / PBS)4. SPRING PRELOAD REFERENCE5. GEAR MOTOR WITH ENCODER6. PROJECTING PIN7. SPRING LOCKING SCREW (MODELS 900PBL / PBS)
LEAF AUTOMATION Automations designed to be reliable and safe, the solution for every application: 24 Vdc technology to guarantee safer operations,a full range of accessories, suitable to automate different type of opening, ease in installation.All these features to simplify all kind of entrances either commercial or residential.
TECHNICAL FEATURESThis automation has a 24 Vdc motor with microprocessor electronic control panel and an electronic impact-free device with encoder.Opening & closing speed regulation, power and impact force adjustment (wind stop).Thanks to a wide range of accessories different kind of openings are possible.The cover profi le is made of 15 micron chemical silver anodized aluminum, with an elegant shape suited to every context.
DOORS
A U T O M A T I O N96
LEAFAUTOMATION FOR SWING DOORSFROM 120 TO 250 kg
900BDT2Sliding operation arm.
900BSS2Articulated operation arm.
AUTOMATION
900PBLAutomation for swing doorswith wings up to 120 kg,opening by motor and closingby spring.
900PBMAutomation for swing doorswith wings up to 250 kg,opening and closing by motor.
900PBSAutomation for swing doorswith wings up to 250 kg,opening by motor and closingby spring.
AUTOMATIONS FOR SWING DOORS D O O R S
KEY AUTOMATION | CATALOGUE 2011
97
LEAF
900SMNManual selector,for automatic swing gates.
900WR3MSMaster/slave cable for double swing operator.
900PEFEmergency push button.
900SS700Security sensor 700 mm2 modules TX / RX..
900COP1Central cover for double swing operator,mm 1000.
900SDN1Digital key pad.
ACCESSORIES
A U T O M A T I O N98
WIND / WIND LIGHT / LEAF
DOORS
900SEL-MAluminum key switch.
900SEL-DAluminum wireddigital key pad.
900SEL-EUAluminum key switch with European cylinder.
900DECODERDecoder for digital key pad 900SEL-D.
900DECSEL-TDecoder for proximity sensor for transponder cards 900SEL-T.
900CARDTransponder card(10 pcs).
900ADPA Adhesive automatic doors dx + sx (5 pcs).
900PA014Kit photocellswith managing board.
900SEL-TXFRadio controlled digital key pad in aluminum.
900RXM-42Universal radio2 channels fi x code.
900SEL-TProximity sensorfor transponder cards.
ACCESSORIES
900TAGProximity tagwith key ring.
AUTOMATION FOR SLIDING AND SWING DOORS D O O R S
KEY AUTOMATION | CATALOGUE 2011
99
WIND / WIND LIGHT
900SMNPAManual selectorfor automaticsliding gates.
900BMETExternal metal boxfor motor releaseincluding action button.
900SPA125 Brush h 25 mm for cover PA PAL 1000 mm.
900PA013 Digital selector.
900PA025Active infraredradar sensor.
900PA012Infra red volumetric radar.
900KPAFKOCarter supports.
900KOMSCAKit cable supportsPA-PAL (10 pcs).
900PA014Kit photocellswith managing board.
900PA011900PA011LComplete kit for manual release.
ACCESSORIES
A U T O M A T I O N100
DOORS
FASTENING KIT FOR GLASS DOOR
CODE DESCRIPTION PSC PALLET
900KITANSTSF1 Full crash anti-panic systemfor one door max length2000 mm
1
900KITASNTSF2 Full crash anti-panic systemfor one door, max length 2000 mm,with kit photocells 900PA014Includes:
1
Under anti-crash guidance profi le. 1
Upper adaptor profi le. 1Kit photocell. 1900KITANTSF1 1
CODE DESCRIPTION
900PA005 Fastening kit for glass door1500 mm.
AUTOMATION FOR SLIDING AND SWING DOORS
ANTI-PANIC SYSTEMS
102 103
ACCESSORIESCONTROL UNITS AND PROGRAMMABLE FUNCTIONS
ACCESSORIES
KEY AUTOMATION | CATALOGUE 2011
A U T O M A T I O N106
GO 24
ACCESSORIES
PLUS
TECHNICAL DATA
24 Vdc CONTROL UNITS
900CT-24SU 900CT-24SBA 900CT-824Spower Vac / Hz 230 / 50 230 / 50 230 / 50
output accessories power Vdc / mA 24 / 400 24 / 400 24 / 400
working time sec 120 120 120
pause time sec 120 120 120
protection degree IP 54 54 54
operating temperature ° C -20° +70° -20° +70° -20° +70°
CODE DESCRIPTION
900CT-24SU For one sliding gate or overhead door 24 Vdc motor with encoder and connectors for receiver.
900CT-24SBA For one barrier 24 Vdc motor, with encoder and connectors for receiver.
900CT-824S For two motors, 24 Vdc switching with encoder, battery charger and connectors for receiver.
CONTROL UNIT
GO 24
New generation control unit with LCD display (900CT-824S).
New generation control unit with soft start and soft stop function availability (900CT-824S).
Motor speed regulation and mechanic safety rubber bar function 900CT-824S.
KEY AUTOMATION | CATALOGUE 2011
107
GO 230
A C C E S S O R I E S
PLUS
TECHNICAL DATA
230 Vac CONTROL UNITS
900CT-101 900CT-2 900CT-201power Vac / Hz 230 / 50 230 / 50 230 / 50
output accessories power Vdc / mA 24 / 300 24 / 400 24 / 400
working time sec 120 60 120
pause time sec 120 2-180 120
protection degree IP 54 54 54
operating temperature ° C -20° +70° -20° +70° -20° +70°
CODE DESCRIPTION
900CT-101 For one sliding, overhead or barrier 230 Vac motor. With electric clutch and connectors for receiver,encoder and slowdown in opening and closing.
900CT-2 For two swing 230 Vac motors, with logical control card, with connectors for receiver. In box.
900CT-201 For two swing 230 Vac motors, with electric clutch option, connectors for receiverand slowdown.In box.
GO 230
Easy programming.
Suitable for residential and industrial openings till 2500 kgs (900CT-101).
Encoder for the obstacle detection (900CT-101).
New generation control unit with LCD display (900CT-101 and 900CT-201).
A U T O M A T I O N108
GO 380
GO 380
ACCESSORIES
PLUS
TECHNICAL DATA
400 Vac CONTROL UNITS
900CT-380 900CT-381 900CT-380E 900CT-381Epower Vac / Hz 400-230 / 50 400-230 / 50 400-230 / 50 400-230 / 50
max motor load W 2000 2000 2000 2000
output accessories power Vdc / W 24 / 15 24 / 15 24 / 15 24 / 15
working time sec 120 120 120 120
pause time sec 120 120 120 120
protection degree IP 56 56 56 56
operating temperature ° C -20° +70° -20° +70° -20° +70° -20° +70°
CODE DESCRIPTION
900CT-380 For one sliding or industrial sectional doors 400 Vac / 230 Vac motor, with slowdown, brake system,connection for receiver. In box.
900CT-381 For one sliding or industrial sectional doors 400 Vac / 230 Vac motor, with slowdown, brake system,connection for receiver. In box with control buttons.
900CT-380E For one sliding or industrial sectional doors 400 Vac / 230 Vac motor, with connection for receiver.In box.
900CT-381E For one sliding or industrial sectional doors 400 Vac / 230 Vac motor, with connection for receiver.In box with control buttons.
CONTROL UNIT
For industrial motor.
With connectors for receiver.
KEY AUTOMATION | CATALOGUE 2011
109
GO 24 / GO 230 / GO 380
A C C E S S O R I E S
460T230V101BTransformer for 900CT-101.
ACCESSORIES
ACCESSORIES GO 230
300BAT-12Battery 12 V 1,2 A.
900KITFIXBAT1Kit fi xing batteries 24 Vdcfor 900BOXKEYS.
300BAT-12-2ABattery 12 V 2 A.
900BOXKEYPlastic box for two motors control unit.
900BOXKEYSPlastic box for one motor control unit.
900KITFIXBATKit fi xing batteries 24 Vdcfor 900BOXKEY.
900BOXKEYSPlastic boxfor one motorcontrol unit.
900CABAT-30Battery chargerfor 24 Vdc motors.
900RXI-222 channels fi x code radioreceiver rolling code.
COMMON ACCESSORIES
ACCESSORIES GO 24
A U T O M A T I O N110
PROGRAMMABLE FUNCTIONS
900CT-201 900CT-380 900CT-381 900CT-380E 900CT-381E 900CT-24SU 900CT-24SBA 900CT-101 900CT-24M 900CT-824S 900CT-2
Man present function • • • • • •Semi-automatic operation • • • • • • • • • • •Automatic operation • • • • • • • • • • •Condominium operation • • • • • • • • • • •Pre-fl ashing • • • • • • • • •Photo during opening too • • • • • • • • • • •Gradual departure • • • • • • • •Gradual stop • • • • • • • •Courtesy light “on” fl ashing light • • • • • • • • • • •Gate open light (CA)with proportional fl ashing • • • • • • •Photocell safety wheneach movement starts • • •Slow down • • • • • • • •Hammering • • •Electric limit switch exclusion • • • • •Temporary pause (photocell) • • • • • • • • • • •Step by Step functionOpen-Stop-Close-Stop • • • • • • • • • • •Extension of working time • •Pause time with presence detector • • • • • • • • •1st motor delay during opening • • •Brake • • • • •Cycle counting card • • • • • •Display • • • • • • •Encoder • • • • •Close after passage • • • • • • •Pedestrian opening • • • • • • • • • •Electrobrake • • •
PROGRAMMABLE FUNCTIONS
ACCESSORIES
112
K E Y H O M E / I N D U S T R Y
SUBWATER RESISTANT4 CHANNELS TRANSMITTER
900SUB-44900SUB-44R900SUB-44N
MEMOSYSTEMS FOR USERSCODES CONTROL
ORION 4TRANSMITTER 433 MHz
LUMY FLASHING LIGHTS
ORIONTRANSMITTER 433 MHz
SEKUR CKEY SWITCHES
SEKUR D/TDIGITAL KEY PADAND TRANSPONDER
SEKUR CHPOSTS FOR PHOTOCELLS
SEKUR FTPHOTOCELLS
MEMOUNIVERSAL AND PLUG-IN RECEIVERS
SEKUR CO/CORSAFETY SYSTEMS
900CDUSB900RXM-440R
900TXB-44900TXB-44R
900LUMY-24900LUMY-230
900TXB-42900TXB-42R900TXB-42N
900SEL-M900SEL-EU900SEL-C
900SEL-D900SEL-TXF900SEL-T
900CH-51900CH-101900CH-50900CH-100
900FT-20K900FT-31900FT-40K900FT-41
900RXI-22900RXM-42900RXM-42R900RXM-44900RXM-44R900RXM-230-42900MEM
900COMS16900COMS20900COMS25900COMB12900COMB18900COMSR16900COMSR20900COMSR25900COMBR12900COMBR18
ACCESSORIES
KEY AUTOMATION | CATALOGUE 2011
NOA U114
ACCESSORIES
PLUS
SUBWATER RESISTANT 4 CHANNELSTRANSMITTER
CODE DESCRIPTION
900SUB-44 4 channels fi x code, 433.92 MHz.
900SUB-44R 4 channels rolling code, 433, 92 MHz.
900SUB-44N 4 channels copier, 433, 92 MHz.
ACCESSORIES
Water resistant.
Ergonomic, simple and modern design.
Valuable materials and precious fi nishes thanks to the new generationtri-injection molding.
Metal chromed insert.
Different interchangeable colors.
Colours are indicatives. The offi cial range will beColours are indicatives. The offi cial range will bepresented on web site www. Keyautomation.itKeya
KEY AUTOMATION | CATALOGUE 2011
ORION 4
A U T O M A T I O N 115
ORION
A C C E S S O R I E S
2 CHANNELS TRANSMITTER 433 MHz
CODE DESCRIPTION
900TXB-42 2 channels fi x code.433.92 MHz.
900TXB-42R 2 channels rolling code.433.92 MHz.
900TXB-42N 2 channels copier.433.92 MHz.
4 CHANNELS TRANSMITTER 433 MHz
CODE DESCRIPTION
900TXB-44 4 channels fi x code.433.92 MHz.
900TXB-44R 4 channels rolling code.433.92 MHz.
A U T O M A T I O N116
MEMO
900RXI-22900RXM-42900RXM-42R
ACCESSORIES
TECHNICAL DATA
UNIVERSAL AND PLUG-INRECEIVERS
900RXI-22 900RXM-42 900RXM-42R900RXM-44
900RXM-44R 900RXM-230-42
reception frequency MHz 433,920 433,920 433,920 433,920 433,920
power Vac / (Vdc) 12 / (24) 12 / (24) 12 / (24) 12 / (24) 230
idle consumption m A 12 12 12 12 16
sensitivity dBm -109 -109 -109 -109 -108
relay contacts max supply A 1 1 1 1 8
relay contacts max voltage Vdc 24 24 24 24 230
operating temperature °C -20° +70° -20° +70° -20° +70° -20° +70° -20° +70°
ACCESSORIES
CODE DESCRIPTION
900RXI-22 2 channels fi x code universal receiver, rolling code, 400 codes.
900RXM-42 2 channels fi x code universal receiver, plug-in connector, up to 400 codes.
900RXM-42R 2 channels rolling code universal receiver, plug-in connector, up to 220 codes.
900RXM-44 4 channels fi x code universal receiver in box, up to 400 codes.
900RXM-44R 4 channels rolling code universal receiver in box, up to 220 codes.
900RXM-230-42 2 channels fi x code, 230 Vac, universal receiver in box, up to 400 codes.
900MEM Memory for expanding codes up to 800 for 900RXI-22.
MEMO
KEY AUTOMATION | CATALOGUE 2011
900CD-USB
KE
YAUT
OMAT
IONS.P.A._V
IAAL
SS
_300
0NO
ENTA
DI PIAVE
(VE)_ITAL
IA
ANDRO
VOLTA, 3
0LE
0020
NOV
117
MEMO ACCESS
A C C E S S O R I E S
TECHNICAL DATA
CODE CONTROL
900RXM-440Rreception frequency MHz 433,920
power Vac 230
idle consumption m A 16
sensitivity dBm -108
relay contacts max supply A 8
relay contacts max voltage Vdc 230
operating temperature °C -20° +70°
CODE DESCRIPTION
900CDUSB CD-ROM for the installation of the program for users’ code managing, USB cable and antenna.
900RXM-440R Receiver 4 channels, rolling code, programmable, 700 codes.
MEMO ACCESS
A U T O M A T I O N118
SEKUR FT
ACCESSORIES
TECHNICAL DATA
PHOTOCELLS
900FT-20K 900FT-31 900FT-40K 900FT-41range m 20 25 20 20
power Vac / (Vdc) 12 / (24) 12 / (24) 12 / (24) 12 / (24) rx - 3 tx
consumption rx m A 30 30 30 30
consumption tx m A 20 20 20 0,04
relay contacts max supply A 1 1 1 1
relay contacts max voltage Vdc 24 24 24 24
working temperature °C -20° +70° -20° +70° -20° +70° -20° +70°
CODE DESCRIPTION
900FT-20K Pair of photocells for external use (90x30x28 mm).
900FT-31 Pair of photocells for external use and fl ush mounting.
900FT-40K Pair of photocells for external use adjustable through 180° (110x38x38 mm).
900FT-41 Pair of photocells for external use adjustable through 180° with batteries.
ACCESSORIES
SEKUR FT
KEY AUTOMATION | CATALOGUE 2011
119
SEKUR CH
A C C E S S O R I E S
ACCESSORIES
CODE DESCRIPTION
900CH-51 Couple of support posts H 50 cm with anodized aluminum.
900CH-101 Couple of support posts H 100 cm with anodized aluminum.
CODE DESCRIPTION
900CH-50 Couple of support posts H 50 cmwith aluminum.
900CH-100 Couple of support posts H 100 cmwith aluminum.
900BAT-3Kit battery for 900FT-41.
900MUR-PPlastic wall support.
900SUMCHSupport head for photocelland column digital key pad.
A U T O M A T I O N120
SEKUR C
ACCESSORIES
KEY SWITCHES
CODE DESCRIPTION
900SEL-M Aluminum key switch.
900SEL-EU Aluminum key switch with European cylinder.
900SEL-C Plastic key switch for surface or fl ush-mounting.
ACCESSORIES
KEY AUTOMATION | CATALOGUE 2011
121
SEKUR D/T
A C C E S S O R I E S
DIGITAL KEY PAD AND TRANSPONDER
370BATDIGBatteries kitfor 900SEL-TXF.
900CARDTransponder card(10 pcs).
900RXM-42Two channels, fi x code,universal receiver.
900DECODERDecoder for digital key pad900SEL-D.
900DECSEL-TDecoder for proximity sensorfor transponder cards 900SEL-T.
ACCESSORIES
CODE DESCRIPTION
900SEL-D Wired digital key pad in aluminum, to be ordered together with 900DECODER.
900SEL-TXF Radio controlled digital key pad in aluminum, to be ordered together with all radio receiver.
900SEL-T Proximity sensor for transponder cards, to be ordered together with 900DECSEL-T.
900TAGProximity tagwith key ring.
A U T O M A T I O N122
SEKUR CO/COR
ACCESSORIES
SAFETY SYSTEMS CODE DESCRIPTION
900COMS16 Mechanic safety rubber bar, 1,6 mlong for sliding gates. With micro-switches.
900COMS20 Mechanic safety rubber bar, 2,0 mlong for sliding gates. With micro-switches.
900COMS25 Mechanic safety rubber bar, 2,5 mlong for sliding gates. With micro-switches.
900COMB12 Mechanic safety rubber bar, 1,2 mlong for overhead doors. With micro-switches.
900COMB18 Mechanic safety rubber bar, 1,8 mlong for overhead doors. With micro-switches.
900COMSR16 Mechanic safety rubber bar, 1,6 mlong for sliding gates. With continousself diagnosis technology. (8.2 K ).
900COMSR20 Mechanic safety rubber bar, 2,0 mlong for sliding gates. With continousself diagnosis technology (8.2 K ).
900COMSR25 Mechanic safety rubber bar, 2,5 mlong for sliding gates. With continousself diagnosis technology (8.2 K ).
900COMBR12 Mechanic safety rubber bar, 1,2 mlong for overhead doors. With continousself diagnosis technology (8.2 K ).
900COMBR18 Mechanic safety rubber bar, 1,8 mlong for overhead doors. With continousself diagnosis technology (8.2 K ).
Safety devices o be fi tted on automatic closing systems. Control board and resistance.With line 900COMB obligad: 900ANGDX, 900ANGSX, 900TAPDX, 900TAPSX, 900GIUN.
ACCESSORIES
900ANGDX Right angle joint.
900TAPDXRight fi nishing cap.
900SKRElectronic system checkingthe correct operation of oneand more safety devices.
900ANGSX Left angle joint.
ACCESSORIES
900GIUNJoints.
900TAPSXLeft fi nishing cap.
KEY AUTOMATION | CATALOGUE 2011
123
LUMY
A C C E S S O R I E S
FLASHING LIGHTS
900RG-58Coaxial cable rg-58.
900ANTS-433433 MHz, aerial with steel bracketand 5 mrg-58 cable.
900SULUSupport for LUMY.
ACCESSORIES
CODE DESCRIPTION
900LUMY-24 24 Vdc fl ashing light,25 W, with antenna.
900LUMY-230 230 Vac fl ashing light,25 W, with antenna.
A U T O M A T I O N124
K AUTOMATION
GENERAL TERMS OF SALE
GENERAL TERMS OF SALE
1. EFFECTIVENESS OF THESE GENERAL CONDISTIONS OF SALE
These general conditions of Sale will replace all previous conditions and are applicable to all orders submitted to Key Automation S.p.a. (hereinafter referred to as Key Automation) for products carrying the Key Automation trade mark. All sales of goods by Key Automation to its Customers (hereinafter referred to as Customer) shall be governed by the following General Conditions of Sale, which shall constitute an integral part of any agreement for the sale of goods between Key Automation and Customer, and shal supersede and cancel any inconsistent covenant or provision contained in the order or other document issued by th Customer. Illustrations and descriptions contained in Key Automation catalogues and other printed materials are for the sole purpose of identifi cation, and may be modifi ed by Key Automation at any time without prior notice.
2. ORDERS
Any orders shall be deemed as issued “subject to availability of the goods and any alteration of the price lists”. Key Automation reserves the right to accept or reject, in whole or in part, any order submitted by the Customer, on account of their compliance with these General Conditions, and of the availability of the goods order. Key Automation reserves the right to change/modify the technical characteristics of its products at any time and without prior notice or liability. Orders placed by the customer cannot be cancelled by the Customer, either wholly or partially, after ten days of being submitted to Key Automation: if any orders are cancelled after such term, Key Automation shall be entitled to payment of the whole price.
3. PRICES
The goods shall be sold by Key Automation to Customer at the prices set out in the Key Automation price list effective at the time of delivery. The Customer shall inconditionally accept any variation of the price list made between the time of order and the time of delivery. Any new Key Automation price list cancels and substitutes the previous ones. All prices in the Key Automation catalogue are “ex factory” and before tax.
4. DELIVERY TERMS
All goods shall be delivered “ex factory” Key Automation S.p.a., via Volta 30 30020 Noventa di Piave (Venezia).Except for different written agreement delivery terms are 10 days for National shipment and 30 days for International shipment, a part for products signed on price list with red sign on right part of paper, which have a delivery time of 6 weeks. Delivery terms start from customer acceptation of Key Automation order confi rmation. In case of delay of delivery not exceed in customary allowances, the Customer shall not be entitled to claim for termination, in whole or in part, of the agreement, or to refuse to accept delivery of the goods, or to claim compensation for damages. The obbligation to deliver the goods shall be fullfi lled upon delivery of the goods to the carrier. Key Automation shall be released from the obligation to deliver the goods in any event of “Act of God” or “force majeure”, such as strikes, social and political disorders, unavailability of raw materials, electrical components or other products, and any other events preventing Key Automation from delivering the goods, for which Key Automation is not responsible.
5. SHIPMENTS
The goods shall be shipped on such carrier(s) as Key Automation may select, and Key Automation shall charge the relevant amount to the Customer including in the relevant invoice.The customer may agree with Key Automation at the time of order, to use a different carrier (always at the customer costs, or to collect the goods directly ex factory Key Automation S.p.A., Noventa di Piave, Venezia. All risks shall pass to the Customer at the time of delivery. Thefts, losses, damages, shortfalls shall not release the Customer from the obligation to pay the price, if the goods have been duly delivered to the carrier at Key Automation factory. The goods shall not be covered by insurance, unless expressily required by the Customer and at Customer’s cost and risk.
6. COLLECTION OF THE GOODS
The Customer shall properly collect the goods as soon as they are put at the Customer’s disposal, and communicated to him through telephone, fax or e-mail. In case of delay, Key Automation shall be entitled to full payment of the price and reimbursement for any cost of storage and custody of the goods, saving any compensation for damages. Key Automation shall not be liable in respect of any damage resulting directly or indirectly from the storage of any goods not collected when available at the Key Automation wharehouses of the carrier, forwarding agent or third parties.
7. WARRANTY
Our guarantee takes effect from the date of manufacturing, put on each Key’s product and it lasts for 30 months.This warranty period is fi x and imperative. It is limited exclusively to the repair or replacement free of charge of the parts recognised by Key Automationas faulty due to lack of essential qualities in the material or to errors in workmanship. Any complaints about apparents defects shall be claimedto Key Automation compulsory no later than 8 days after delivery and occult defects within 8 days from discovery. If these terms are not respectedthe warranty is not be valid. Complaints never allow the order reducing or cancellation from Customer, and moreover never allow Key Automation refundor compensation. All expenses related to delivery and dispatch of complained material are charged to the customer. Key Automation shall not be responsible for any direct or consequential damage or inquiry caused by installation and use of any equipment. In the event of totally or partially irreparable equipment, Key Automation shall arrange for its replacement in the state in which it is or, upon explicit request of the customer, shall repair the same by replacingthe irreparable parts, charging the customer with the whole cost of the new parts supplied. Key Automation shall not be held responsible for defects resulting from connection, combination, or interaction of its products with other products not supplied by Key Automation.
KEY AUTOMATION | CATALOGUE 2011
125
K E Y A U T O M A T I O N
Key Automation products can only be used in combination with other Key Automation’ s products, failing which this warranty will cease to be effective.Key Automation disclaims all liability for defects or damage resulting from failure to comply with its assembly and wiring instructions, or with any electrical codes or other regulations locally in force at the time of installation. Moreover the Manufacturer disclaimes all responsibility for defects or damage resulting from improper installation, use or connection of any accessories and/or electrical or mechanic components manufactured by Key Automation, including failure to comply with the diagrams and types of connections for which these products have specifi cally been designed, as well as for the use or application of these products for purposes other than those for which they are intended, in compliance with their specifi c capacity and range. For products longer covered by this warranty Key Automation shall provide repair services, charging the related costs to the Customer. In case of products that cannot be repaired, Key Automation shall, at its sole discretion, replace them, and charge related costs to the Customer.
8. COMPLAINTS AND RETURNED GOODS
No complaints are accepted after 8 days from the receipt of the goods. Any return of goods for credit must be authorised before and by Key Automation. Goods returns and shipment freight are of customer charge. Any communication has to be done to Key Automation headquarter.
9. CANCELLATION CLAUSE
If the customer fails to pay the total price of goods or even a part of it by the previously agreed expiration date specifi ed in the invoice,Key Automation will be entitled to cancel the right of goods receipt by the customer, cancel the sale and moreover charge the customerwith interests on arrears in equal measure to standard norms and not inferior to current bank interests. Key Automation is also entitled to cancel the sale at any moment by simply forwarding a written notice of cancellation to the customer without the involvement of any juridical court. Goods that have been delivered to customers but not paid completely should be given back to Key Automation on customer’s charge.In order to do so, Key Automation and any other entitled third party or carrier are authorized to demand and retire unpaid goods from customer’s facility. It is not am any kind of compensation possibility between possible credits claimed by customer and its debts with Key Automation, except if agreed by Key Automation with formal written agreement between the parts.
10. TRADEMARKS AND DISTINTIVE MARKS
The customer is aware of the fact that Key Automation products are subjected to both the know-how and design intellectual ownership right which is an exclusive industrial property of Key Automation.Customers shall not violate the rights of Key Automation by removing, covering or in any way changing trademarks, distinctive marks or labels and the like attached to products and shall not apply there on new trademarks, distinctive marks or labels and the like of any kind. Unless written authority is given by Key Automation to the contrary any form of reproduction use by the Customer of the Key Automation trademark, logos, emblems, symbols and the like attached to or applied on the products is forbidden.
11. RETENTION OF TITLE
Notwithstanding any other provision contained herein, it is acknowledged and agreed that ownership of the goods shall pass to the Customer only upon full payment of the total price; therefore until full payment (including interest) is received by Key Automation, the goods delivered - wherever they may be held and even if they have already been resold by the Customer - shall remain the sole and exclusive property of Key Automation.Any cheques, bills of Exchange and transfer of credit will count as payment only upon collection. In the event of non - payment, Key Automation shall be entitled to immediate repossess sold products wherever they may be located. The Customer shall disclose the names of any third purchasers of the products, from whom Key Automation shall be entitled to claim and collect them
12. ITALIAN LAW AND COMPETENT COURT
The place of jurisdiction for any dispute that may rise in relation to the performance of the contract is the Law Court of Treviso (Italy).
13. VARIOUS
At the time of signing the contract or order confi rmation, the Customer accepts these general terms. Any modifi cation to the general terms mustbe signed by Key Automation S.p.A. and stipulated in written form. For sales made in foreign countries, Italian law will be applied.All information have been listed and carefully checked by Key Automation S.p.A., but the company decline any kind of responsibility for possible mistakes or omissions.
A U T O M A T I O N126
K AUTOMATIONNOTE
KEY AUTOMATION | CATALOGUE 2011
127
2011KEY AUTOMATION S.P.A.Via Alessandro Volta, 30
30020 Noventa di Piave
VENEZIA - Italy
T. +39 0421 307456 - F. +39 0421 65698
[email protected] - www.keyautomation.it
KEY - POLSKA SP. Z.O.O.ul. Gierdziejewskiego 7
Wejscie IV, LOK 12
Warszawa 02-495 - Polska
T. +48 224 782266 - F. +48 224 782267
[email protected] - www.key-polska.pl
KEY AUTOMATION (HANGZHOU) CO., LTDNo. 385, Road No. 18,
Economic & Technology Development Zone,
Hangzhou, P.R.China - P.C. 310018
T. +86 571 86703900 - F. +86 571 86703901
[email protected] - www.keyautomation.cn
A U T O M A T I O N