Austrian Exhibitors at Medica 2015

ÖKZ EXTRA:Export & MEDICA

2015

P.b.b. GZ 02Z033434 M | Verlagspostamt: A-8041 Graz, Kasernstraße 80/8/25 | www.schaffler-verlag.com | ISSN 0472-5530

World Forum for Medicine

Medical devicesGesundheitswirtschaft

MEDICA Facts

Cluster

InternationalInnovation

Austria

Visitors

Hall Plan

B2B

ÖsterreichCompany Profiles

MEDICAExport &

AusstellerHallenplan

Verzeichnis

Exhibitors

Inhalt

Impressum nach § 24 MedienG: Medieninhaber: Schaff-ler Verlag GmbH, DVR 1031911, A-8041 Graz, Kasernstraße 80/8/25, T: +43(0) 316 820565-0, F: +43(0) 316 820565-20, E: [email protected], Web: www.schaffler-verlag.com. Druck: Dorrong, Graz. Herausgeber: Mag. Roland Schaffler, [email protected], am Standort Re-daktion Graz: A-8041 Graz, Kasernstraße 80/8/25. Auf die Hinzufügung der jeweiligen weiblichen Formulierungen wird bei geschlechtsspezifischen Hinweisen im Sinne der flüssigen Lesbarkeit und einer angemessenen Sprach-qualität zum Teil verzichtet. Alle personalen Begriffe sind sinngemäß geschlechtsneutral zu lesen. Die inhaltliche und rechtliche Verantwortung für Beiträge, beigestellte Fotos und Graphiken liegt ausschließlich bei den in dieser Ausgabe angeführten Firmen. Sie halten den Verlag dies-bezüglich schad- und klaglos. Weitere Informationen und Offenlegung nach § 25 MedienG: www.schaffler-verlag.com > „Impressum“

FortschrittlichDer Gang durch die Hallen der MEDICA wird, heuer vom 16. bis 19. November, wieder Fortschritt zeigen. Mit der Verlegung vom Wochenausklang auf die neuen Wochentage Montag bis Donnerstag erstmals in diesem Jahr beweist die MEDICA, dass sie es ernst nimmt mit dem Fortschritt: Fortschritt ist echte Arbeit und gehört also zur Gänze in die Arbeitswoche.

Das sollte auch für Politik gelten. Zu oft erlebten wir im letzten Sommer eilige Wochenendkonferenzen und nächtliche Marathonsitzungen, in denen Entscheidungen mit schwerwiegenden Wirkungen getroffen werden sollten. Zumindest klang das Communiqué auf das erste Ohr nach Entscheidung; zumindest nach kleinem Fortschritt.

Gesundheitswirtschaft lebt vom Ringen um echte Innovation und ihrem Gelingen. Die Invention, also die Erfindung oder eine gute Idee, und ein neues Design allein machen hier noch keinen Sommer. Daran ändert auch die Inflation des Etiketts „innovativ“ für Produkte, Dienstleistungen und Lösungen aller Art bekanntlich nichts.

Was hier zählt, ist der Vorteil, der sich für die Kunden ergibt. Wenn der nicht größer ist als der Preis, hüten auch „innovativste“ gute Ideen die Läden und Lagerhallen. Spätestens nach dem Sommer 2015 erwarte ich mir ganz persönlich die Innovationen nicht mehr aus der Politik und ihren angelagerten Lobbymächten. Um ehrlich zu sein, war das genau ab 1979 nach dem Fernsehen eines Meeresfilmes von Jaques Cousteau nicht mehr der Fall.

Heute erwarte ich, dass die Innovationen von hausverständlichen und praxiserfahrenen Profis erkannt und damit erschaffen werden. Extra dafür erlauben wir uns, Ihnen diese ÖKZ EXTRA: Export & MEDICA mit auf den Weg zu geben. Bitte bringen Sie die Innovationen mit von ihrem Gang durch die MEDICA-Hallen, und die Inventionen, die es noch werden könnten …

Ihr

Roland SchafflerHerausgeber

04 Wirtschaftsstandort Österreich

06 MEDICA 2015 – Was man wissen muss

08 Firmenverzeichnis/ Company Profiles

12 Hallenplan/Pocket Plan

Was Unternehmen leisten

7 AIT Austrian Institute of Technology GmbH: Optimierung von Implantatmaterialien

9 Biegler Medizinelektronik: Automatic Pressure Infusor

15 ADVANTAGE AUSTRIA – Commited Experts

17 LISA – Life Science Austria: Advancing Austrian life science at the heart of Europe

21 Cluster Life Sciences Tirol – Medizintechnik Made in Tirol

24 MEDICA 2015

56. Jg. (2015), ÖKZ EXTRA: Export & MEDICA | www.schaffler-verlag.com2 ÖKZ EXTRA: Export & MEDICA

Advancing Life Science at the Heart of Europe

Welcome to the LISA Pavilion 17D20 in cooperation with the Austria Trade Commission!

Over the past decade, Austria has established as a well-respected hub of the life science industry. Region by region, the life science industry has spread across Austria from the capital Vienna to the powerhouses of Styria, Tyrol and Upper and Lower Austria. Each region has its own special culture and particular strength. A total of 435 companies can be related to the field of medical devices. These companies employ in total almost 25,000 people and have a turnover of 7.4 billion euros.

Life Science Austria (LISA) promotes the life science sector in Austria on the international stage and is the first point of call for enquiries relating to it. Organised through regional life science clusters, LISA represents companies in the therapeutic, medical technology and diagnostic sectors as well as providers of enabling technologies.

The following pages will give you a brief overview about the Austrian companies and organisations participating at MEDICA 2015. Please don’t hesitate to come to our LISA desk if you need additional information. We will be more than happy to assist you.

Parisa BayatyManager International Marketing

Discover and experience the fascinating innovations and trends „Made in Austria“!

There are 62 Austrian exhibitors presenting at MEDICA & COMPAMED 2015, including 43 companies at the Austrian Group stands in halls 3 and 17 and at COMPAMED (hall 8b).

This exhibition guide aims to give you an insight into the diverse range Austria has to offer in the fields of medical technology, microbiology, laboratory medicine, diagnostics, producing and processing medical products as well as equipment and technology for manufacturing medical devices. It should also simplify your visit around the fair.

With our offices in Frankfurt, Berlin and Munich – www.advantageaustria.org/de – the Austrian trade delegations are your first port of call for establishing contacts to Austrian companies.

We are looking forward to meeting you at our group stand and wish you a successful MEDICA & COMPAMED 2015.

Michael LoveAustrian Trade Commissioner

MEDICA and COMPAMED: Unique for the market players of the medical technology industry

To get to the top is difficult; to stay at the top is even more difficult. Every athlete knows that and this also applies to the trade show business. In this way, defending the uncontested leading position of the world’s largest and internationally leading medical trade show, MEDICA in Düsseldorf, means downright physical exertion. Based on market analyses, trend research, suggestions made by industry experts and, last but not least, in open discussion with exhibitors, the MEDICA has been reformed successively at a conceptual level in recent years with new forums and accompanying conferences. The subject matter is being continuously adapted to the needs of specialist visitors and exhibitors in close cooperation with committees involving the most important industry associations.

A significant change also entails the results of intensive evaluation of exhibitor and visitor surveys, as well as coordination with industry associations. It concerns the running time of the MEDICA in addition to the supplier trade show, taking place at the same time, COMPAMED. From this year on, both events will run over the course of four days in parallel to each other, meaning on the new weekdays from Monday to Thursday this year from November 16th to 19th. Focusing on the “normal” working days of the week (instead of Wednesday to Saturday as has been the case up until now) will make it possible to provide better guest distribution for the professional audience across the entire running time in the future, enabling exhibitor presentations as well as their stand infrastructure to be utilized in a more consistent manner.

What applies to the MEDICA and COMPAMED also applies to the market players of the medical technology industry. The only ones that stay at the top are those with creativity and a continuous level of agility conform to market interests and developments.

Visit us online at: www.medica.de and www.compamed.de

Joachim SchäferManaging Director Messe Düsseldorf

© A

WS

©M

esse

Düs

seld

orf

56. Jg. (2015), ÖKZ EXTRA: Export & MEDICA | www.schaffler-verlag.com ÖKZ EXTRA: Export & MEDICA 3

Life Sciences und Medizintechnik gehören zu den bedeutendsten Technologie- und Wirtschaftsbereichen des 21. Jahrhunderts. In Österreich bieten Netzwerke etablierter Pharma-Unternehmen, innovativer Biotechnologiefirmen, führender Forschungseinrichtungen sowie wichtiger Kompetenzzentren die idealen Voraussetzungen für einen Life-Science-Standort von internationaler Bedeutung.

M it seinen beachtlichen Forschungs- und Entwick-lungsnetzwerken genießt Österreich in der Medizin-technik weltweit den besten Ruf: von Diagnosegerä-

ten und Dentalinstrumenten bis zum Bau und Management von Großkrankenhäusern.

Die enge Zusammenarbeit von Universitäten, Forschungszen-tren und der Wirtschaft sowie exzellent ausgebildete und erfah-rene Expertenteams garantieren höchste Qualität. Mit seiner anerkannten und gut integrierten Industrie ist Österreich in ei-ner starken Position auf dem weltweiten Markt der globalisier-ten Life Sciences.

Österreichs Medizintechnik

Gesundheit und Medizintechnik sind besonders dynamische Wirtschaftszweige. Europaweit sind beinahe zehn Prozent aller Beschäftigten in diesen Bereichen tätig. Österreich hat sich als Lieferant smarter Technik weltweit einen exzellenten Ruf erwor-ben. Erstklassige Spitäler, hervorragende Forschungseinrich-tungen und gut ausgebildete Mitarbeiter liegen dieser Entwick-lung zugrunde. Junge innovative Unternehmer profitieren von einem dichten Netzwerk exzellenter akademischer Institutionen und von der Präsenz weltweit führender Unternehmen in diesem Geschäftsbereich.

In einer Branche, die von Spezialisierung und Innovation ge-kennzeichnet ist, profitieren Kunden aus aller Welt von Know-how und Forschungsstrukturen ihrer österreichischen Partner. Auch die Nachfrage nach Gesundheitsdienstleistungen aus

Österreich steigt stetig, sei es für Operationen, Rehabilitation oder Vorsorgemedizin, aber auch im Wellnessbereich.

Dank der umfassenden Geschäfts-, Forschungs- und Entwick-lungsnetzwerke ist es Österreichs medizintechnischen Firmen gelungen, sich weltweit in einigen Bereichen einen hervorra-genden Ruf aufzubauen: z. B. bei Diagnoseausstattungen, bei Dentalwerkzeugen, bei Errichtung und Management von Groß-kliniken.

Die Vielfalt der österreichischen Geräteinnovatoren

Die medizintechnische Industrie in Österreich ist sehr breit gefächert und umfasst kleine und große Unternehmen. Einige multinationale Firmen haben hier ihren Hauptsitz oder Produk-tionsanlagen, um die ideale geographische Lage Österreichs im Herzen Europas zu nutzen. Ein weiterer beachtenswerter Faktor ist das hohe Maß an Kooperation zwischen Herstellern, Lieferantennetzwerken und Dienstleistungsanbietern, die sich in unmittelbarer Nähe voneinander befinden. Daher sind viele Erfolge tatsächlich „made in Austria“.

Business Location Austria

Österreich liegt im Herzen Europas. Dank gut ausgebildeter Arbeitskräfte, ausgezeichneter Produktivität und angemesse-ner Löhne gilt Österreich als erstklassiger Wirtschaftsstand-ort. Staatliche Förderungen für Startups und Unternehmens-expansionen sowie ein attraktives Finanzierungsumfeld sind weitere Gründe, sich für Österreich zu entscheiden. Im Laufe

Wirtschaftsstandort Österreich


MEDICA 2015

des letzten Jahrzehnts hat sich Österreich als hoch angesehene Drehscheibe der Life Science Industrie etabliert. Diese breitete sich allmählich über ganz Österreich aus, von der Hauptstadt Wien zu den Zentren in der Steiermark, Tirol, Ober- und Nie-derösterreich. Jede Region hat ihre eigene besondere Kultur und spezielle Stärken, die sich in den lokalen Unternehmen, die wiederum in regionalen Life Science Clustern organisiert sind, widerspiegeln.

Life Science Austria (www.lifescienceaustria.at, LISA) bewirbt den österreichischen Life-Science-Sektor (Medizintechnik, Bio-technologie, Pharma) auf der internationalen Bühne und ist erste Anlaufstelle für spezifische Anfragen. Über die regiona-len Life-Science-Cluster organisiert, vertritt LISA Unternehmen in therapeutischen, medizintechnischen und diagnostischen Sektoren sowie Anbieter von Schlüsseltechnologien und dazu gehörende Dienstleistungsunternehmen in den folgenden Re-gionen::: Niederösterreich | ecoplus (www.ecoplus.at):: Steiermark | Human.technology Styria (www.humantechnology.at) :: Tirol | Cluster Life Sciences Tirol (www.standort-tirol.at/ls):: Oberösterreich | Gesundheitstechnologiecluster (www.gesundheits-cluster.at):: Wien | LISAvienna (www.lisavienna.at)

LISA hat sich der Entwicklung, dem Wachstum und dem Erfolg der österreichischen Life Science-Industrie verschrieben, da diese einen herausragenden Bestandteil der österreichischen Wirtschaft darstellt.

Mit dem Branchenfokus „Gesundheit und Medizintechnik“ greift die AUSSENWIRTSCHAFT AUSTRIA österreichischen Unterneh-men speziell beim Markteintritt in Dänemark, Deutschland, Ru-mänien sowie in die Fernmärkte Japan, Südkorea, Taiwan, Türkei und USA unter die Arme. (www.wko.at > Außenwirtschaft). ::

Zahlen und Fakten1

Mit über 700 Unternehmen, die in den Bereichen Biotech-nologie, Pharma- und Medizintechnik tätig sind, stellen diese Branchen einen wichtigen Teil der österreichischen Wirtschaft dar.

Im Jahr 2012 haben diese Unternehmen zusammen einen Umsatz von mehr als EUR 17,5 Milliarden erwirtschaftet – ca. 5,4 % des Bruttoinlandprodukts.

Biotechnologie ist eine außergewöhnlich forschungsin-tensive Industrie. Dies wird durch die EUR 131,8 Millio-nen (70 % des Umsatzes) hervorgehoben, die diese Un-ternehmen im Jahr 2012 in F&E investiert haben.

Weitere und jeweils aktuelle Zahlen finden Sie im jähr-lich erscheinenden „Austrian Life Science Report“ auf www.lifescienceaustria.at.

1 Austrian Life Science Report 2013 (aws - Life Science Austria: www.lifescienceaustria.at)

Wirtschaftsstandort Österreich Foto

s: M

esse

Due

ssel

dorf

/ c

tillm

ann


MEDICA 2015

E ine zentrale Stärke der MEDICA ist, dass sie an einem Ort und zu einem Zeitpunkt nicht nur Lösungen für einzelne medizinische Fachdisziplinen thematisiert,

sondern für den kompletten „Workflow“ der Patientenbehand-lung. In diesem Jahr werden erneut ca. 4.800 Aussteller aus mehr als 60 Nationen die MEDICA nutzen, um die ganze Band-breite an neuen Produkten, Dienstleistungen und Verfahren für die ambulante und stationäre Patientenversorgung vorzustel-len. Keine andere Veranstaltung weltweit bietet auch nur annä-hernd diese Fülle an Innovationen. Nach Hallen übersichtlich gegliederte Schwerpunkte der MEDICA Fachmesse finden Sie am Hallenplan (Seiten 12/13).

Konferenzen eng verzahnt mit Fachmesse

Der hohe Internationalitätsgrad auf der Angebotsseite spiegelt sich auch auf der Besucherseite. Von den fast 130.000 Fachbe-suchern 2014 war mehr als jeder Zweite ein internationaler Be-sucher (aus insgesamt rund 120 Nationen). Um den Bedürfnis-sen des Fachpublikums auch künftig gerecht zu werden, wurde das Programm der begleitenden Konferenzen sowie der in die Fachmesse integrierten Foren mit vielen Highlights geplant.

MEDICA EDUCATION CONFERENCE: Dem Konferenzmotto „Wissenschaft trifft Medizintechnik“ folgend sind die vier Ta-gesthemen so gewählt, dass sich eine enge Verzahnung zu den Medizintechnik-Neuheiten der Fachmesse ergibt. Schwer-punkte sind: Chirurgie und neue operative Techniken (16.11.), Bildgebung, Endoskopie und Interventionen (17.11.), Geriatrie, Ernährungs- und Palliativmedizin (18.11.) sowie Infektiologie, Entzündung und Labormedizin (19.11.).

Konferenz für Katastrophen- und Wehrmedizin DiMiMED sowie die MEDICA MEDICINE + SPORTS CONFERENCE (17.+18.11., Con-gress Center Düsseldorf Süd) rund um Belange der Prävention und der sportmedizinischen Behandlungskonzepte.

MEDICA MEDICINE + SPORTS CONFERENCE zu den Neuheiten, die im Rahmen der Fachmesse präsentiert werden.

MEDICA PHYSIO CONFERENCE: richtet sich mit behandlungs-orientierten Vorträgen an die Fachszene der Physiotherapeu-

ten, Sportmediziner und Orthopäden (18.+19.11., Congress Center Düsseldorf Süd).

38. Deutscher Krankenhaustag: neben aktuellen politischen Themen auch „Praktisches“ wie z. B. Aspekte der Kranken-haus-IT und des Personalmanagements. In diesem Jahr wird der Deutsche Krankenhaustag wieder ergänzt durch die Euro-pean Hospital Conference.

Foren direkt im Messegeschehen

Maßgebliche Entwicklungen vermitteln neben dem MEDICA-Konferenzprogramm ebenfalls die zahlreichen direkt in die Fachmesse integrierten Foren. Dazu zählen jeweils in Halle 15 das MEDICA HEALTH IT FORUM (Telemedizin-Neuheiten) und das MEDICA CONNECTED HEALTHCARE FORUM (Lösungen für die digitale Vernetzung der Akteure im Gesundheitswesen + MEDICA App Competition) sowie das MEDICA TECH FORUM (Produktinnovationen der Medizintechnik-Industrie sowie poli-tische, wirtschaftliche und rechtliche Rahmenbedingungen für das Gebiet der Hightech-Medizin/ Halle 12). Große Bedeutung hat ferner das MEDICA ECON FORUM (Halle 15) zu Fragen der Nutzenbewertung und Finanzierung von Innovationen, primär aus der Sicht der Patienten und der Kostenträger.

COMPAMED – Zulieferer als Fortschrittstreiber

Moderne Diagnostik- und Therapieverfahren erfordern nicht nur ein hohes Maß an Produktentwicklungskompetenz seitens der Medizintechnik-Industrie, sondern auch ihrer Zulieferer, die sich im Rahmen der COMPAMED 2015 präsentieren. In den Hal-len 8a und 8b stellen erneut mehr als 700 Aussteller ihre Tech-nologielösungen und Serviceangebote vor. In ihrer weltweit einzigartigen Kombination bilden MEDICA und COMPAMED die gesamte Prozesskette und das vollständige Angebot me-dizinischer Produkte, Geräte und Instrumente ab. Sie belegen zusammen das komplette Düsseldorfer Messegelände (19 Hal-len). Der Besuch beider Veranstaltungen ist wie in den Vorjah-ren mit nur einem Ticket möglich. ::

Informationen online: www.medica.de und www.compamed.de

MEDICA 2015 – was man wissen mussFür die MEDICA 2015 und die parallele COMPAMED 2015 laufen die Vorbereitungen bereits auf vollen Touren – mit neuen Lauf-tagen, Montag bis Donnerstag, vom 16. bis 19. November 2015. M

esse

Due

ssel

dorf

/ c

tillm

ann


MEDICA Facts

Am AIT wird im Geschäftsfeld Biomedical Systems in Wr. Neustadt im Rahmen des

Research Studio Austria (RSA) „HighPerform-BioMat“ an der Optimierung von Metallen für medizinische Anwendungen geforscht. Solche Metalle sollten ausgezeichnete Biokompatibi-lität, überlegene Korrosionsbeständigkeit im Körper, eine hervorragende Kombination von hoher Festigkeit und Verformbarkeit, einen Elastizitätsmodul ähnlich dem von Knochen sowie hohe Dauer- und Verschleißfestigkeit aufweisen. Diese optimierten, konventio-nellen Materialien haben den großen Vorteil, dass sie rasch für die Anwendung zur Verfü-gung stehen, da umfangreiche Zulassungsver-fahren, wie sie bei neu entwickelten Materi-alien notwendig sind, aufgrund unveränderter chemischer Zusammensetzung entfallen. Am AIT werden Metalle wie Reintitan und Titan-Legierungen für Implantate mithilfe des Equal Channel Angular Pressing (ECAP)-Verfahrens

widerstandsfähiger gemacht. Anwendungen dafür ergeben sich in der Orthopädie, Chirur-gie, Kieferchirurgie und Kardiologie.

Verbesserung mechanischer Eigenschaften

Mit dem ECAP-Verfahren und optionalen Wärmebehandlungen wird eine Technologie eingesetzt, die eine reproduzierbare und deut-liche Verbesserung der mechanischen Eigen-schaften von metallischen Massivwerkstoffen ermöglicht, wie etwa Festigkeit und Dauer-festigkeit unter Beibehaltung einer hohen Verformbarkeit (Duktilität). In speziellen ECAP-Werkzeugen werden zylindrische Werkstücke unter extrem hohem hydrostatischen Druck mehrmals durch einen integrierten, abgewin-kelten Kanal gepresst. Die dabei auftretenden Umformungen führen zu einer ultra-feinkör-nigen Mikrostruktur, ohne die äußere Form des

Werkstückes zu verändern. Das ECAP-Material kann anschließend direkt weiterverarbeitet oder durch zusätzliche konventionelle Bearbei-tungsmethoden verbessert werden. Im Rah-men des RSA werden mit dieser innovativen Prozesstechnologie konventionelle Biomateri-alien für Implantate wie CP-Titan, Ti- und CoCr- Legierungen aber auch Al-Legierungen für Prothesen optimiert. Zusammenfassend lässt sich sagen, dass ECAP-prozessierte biokom-patible Metalle sehr vielversprechende Kan-didaten für Anwendungen in hochbelasteten Implantaten, für längere Haltbarkeit in der biologischen Umgebung und für die Miniatu-risierung von Implantaten bei gleichbleibender Festigkeit sind. Erste Aufträge aus der Indus-trie unterstreichen diesen Erfolg.

Rein-Titan statt Titan-Legierungen

Im Rahmen des 2014 gestarteten RSA-Pro-jektes „HighPerformBioMat“ konnte bereits gezeigt werden, dass durch den ECAP-Prozess bei CP-Titan (Reintitan) die Festigkeitswerte gegenüber dem Ausgangszustand deutlich ge-steigert und bei deutlich höherer Duktilität so-gar jene einer gebräuchlichen Titanlegierung, die Aluminium und Vanadium enthält, über-troffen werden können. Dies ist besonders für medizinische Anwendungen wichtig, wo man auf diese beiden problematischen Legie-rungselemente verzichten will, aber auf sehr gute mechanische Eigenschaften angewiesen ist. Im weiteren Verlauf des RSA möchten die Forscherinnen und Forscher zeigen, dass sich ECAP auch positiv auf die Dauerfestigkeit aus-wirkt und dass die Optimierung dieser markt-fähigen Biomaterialien am AIT reproduzierbar und qualitätsgesichert (ISO 13485 konform) erfolgen kann. ::

Kontakt: Dr. Bernhard MinglerAIT Austrian Institute of Technology GmbHHealth & Environment Department [email protected]

Die Nachfrage nach Hochleistungsmaterialien für Implantate nimmt aufgrund der demografischen Entwicklung mit einhergehendem erhöhten Erkrankungs- und Verletzungsrisiko älterer Menschen sowie der steigenden Zahl von Sportverletzungen stetig zu. Der Patientenanspruch auf Mobilität und Lebensqualität erfordert neue und optimierte biokompatible Materialien, die höchste mechanische und biologische Anforderungen erfüllen und den strengen Medizinprodukte-Richtlinien genügen müssen.

Ent

gelt

liche

Ein

scha

ltun

g

Optimierung von Implantatmaterialien


Was Unternehmen leisten

17/C20ABA – Invest in AustriaOpernring 3A-1010 WienT: +43(0)1/588 [email protected]

3/G60, 17/D20, 8b/F03 ADVANTAGE AUSTRIA Unterlindau 21-29D-60323 Frankfurt/MainT: +49(0)69/971 012 [email protected]/deContact: Mag. Michael Love

17/D20Allomed Medizintechnik GmbH Ludwig-Poihs-Straße 10 A-2320 Schwechat T: +43(0)1/878 40-0 www.pleurasafe.com Contact: Peter Schüller [email protected]

8b/F03AMACO Ing. Vonach GmbHDornbirner Straße 19A-6890 LustenauT: +43(0)5577/[email protected]

ABA - Invest in Austria is the agency of the Federal Ministry of Science, Research and Economy for setting up business in Austria. We offer free advice to companies interested in establishing themselves in Austria, answer all location-related queries and provide information about Austria‘s economy and business environment.• Location search and selection• Search for suitable headquarters and properties• Company establishment queries, advice and assistance for the establishment process• Information on financial assistance and financing opportunities• Labour and taxation law queries

ADVANTAGE AUSTRIA supports Austrian companies with a view to finding new contacts and strengthening existing business companies. We are the first point of contact for companies looking for suitable Austrian suppliers, technologies, and business partners in all industry sectors and in the medical sector in particular. Bringing business together is our business. The Austrian Pavilions are organized as a joint venture between Austria’s official trade promotion organization „ADVANTAGE AUSTRIA“ and the ADVANTAGE AUSTRIA office in Frankfurt.

allomed Medizintechnik GmbH sells and develops high-quality and effective medical devices. Development and innovation for new scientific findings are part of our corporate philosophy. The constantly expanding product range is developed in terms of usability, quality and technology security and increases user safety for doctor and patient.With more than 30 years of experience in medical device business, we are able to respond targeted to the needs of the market and especially to those of our customers. Our field of activity includes the distribution of medical technology products and the development of new products incl. it’s patenting.

AMACO is a system supplier for printing and coding solutions on packages all over the world. Business activities are stretched nowadays to more than 80 countries worldwide. AMACO printers print all required fix and variable product information in-line onto blister packs of medical disposables. The printers are installed on intermittent running packaging machines. Besides printing systems we offer a full range of printing accessories, services and 30 years of know how. AMACO offers the following product lines: • D-FLEX Digital printer • TT Thermal transfer printer • DV Flexographic printer • EC Coder

© S

tand

orta

gent

ur T

irol

8b/F03AT&S Austria Technology & Systemtechnik AGFabrikgasse 13A-8700 Leoben-HinterbergT: +43(0)3842/[email protected]

AT&S is European market leader and one of the world’s leading producers of high-end printed circuit boards. AT&S is especially well positioned worldwide in the highest tech market segment for HDI microvia printed circuit boards, which are chiefly used in mobile devices. The Group is also highly successful in the automotive printed circuit board market and in the industrial and medical technology sectors. In 2013 AT&S took the latest step in implementing its high-tech strategy by entering the IC substrate business as part of a joint venture with a leading global semiconductor manufacturer. As an international growth enterprise AT&S has a global presence, with production facilities in Austria (Leoben, Fehring), India (Nanjangud), China (Shanghai, Chongqing) and Korea (Ansan, near Seoul). It currently employs some 8,000 people.


Company Profiles

11/A22BIEGLER GmbH Allhangstrasse 18aA-3001 MauerbachT: +43(0)1/979 21 [email protected]: Ingeborg [email protected]

Biegler has been successfully involved in development and production of medical devices and disposables for more than 40 years. In a row of prime instruments are the blood and infusion warmer BW 685/S, Protherm II and the emergency warmer ESH04 for mobile use. The automatic pressure infusor AUTOPRESS can be used directly with the warmer or as stand-alone solution wherever fluids have to be dispensed under constant pressure. Biegler offers integrated development and production as OEM services. Certifications: EN ISO 13485:2012, CE 0123, FDA-registered for several products.

Biegler GmbHAllhangstrasse 18a3001 Mauerbach, AustriaTel.: +43 1 979 21 05Fax: +43 1 979 21 05 16email: [email protected] www.biegler.com

AUTOMATICPRESSURE INFUSOR

Administration of

fluids under constantpressure with

electronic control



Administration of


electronic control



Administration of


electronic control11/H42Carl Reiner GmbHMariannengasse 17A-1090 WienT: +43(0)1/402 62 [email protected]: Robert Kö[email protected]

Today the brand name CARL REINER is a synonym for innovative development and the production of new technologies in medicine. This traditional enterprise in Austria is known to be a competent partner, especially in the fields of anesthesia, pulmology, cardiology, urology and ENT. Our product TwinStream™ SHFJV Multi Mode Respirator provides tubeless Jet-Laryngoscopy, Jet-Bronchoscopy, Jet-Tracheoscopy and all forms of surgical and intensive care related Jet-Ventilation. Our product TwinStream™ -ICU provides pulsatile Bilevel Ventilation for the use in the ICU Unit with the possibility to change to Bilevel Ventilation for starting weaning process.

hall 11, stand A 22

Company Profiles

8b/F03CDE Communications Data Engineering GmbH Softwarepark 37/1 A-4232 Hagenberg T: +43(0)7236/3351-4350 www.cde.at Contact: Andreas Oyrer [email protected]

CDE GmbH develops individual Hardware and Software solutions for medical systems since 2001. The core competencies of CDE are Embedded Systems Design, NFC solutions, Smartphone Apps and Web portals. Since 2011, CDE GmbH is ISO 13485 certified and develops Medical Software according the standards IEC 63204 and ISO 14971. CDE GmbH provides all the required documentation for approval and delivers highest quality through the internal development processes. Our long-term customers are market leaders in various fields of medical technology.

17/D20CNSystems Medizintechnik AG Reininghausstraße 13A-8020 GrazT: +43(0)316/723 [email protected]: Mag. Alice [email protected]

CNSystems is market leader in developing non-invasive, continuous technologies for closing the cycle of prevention, (early) diagnosis and hemodynamic monitoring. The company succeeded in revolutionizing the cardiovascular and autonomic assessment by its Task Force® Monitor (e.g. for Syncope assessment, AV-optimization of CRT-pacemakers and research) and established the method of continuous non-invasive blood pressure and hemodynamic monitoring only by means of a reusable finger sensor also in the perioperative and anesthesia field with its latest product development, the CNAP® Monitor 500 HD. The focus is on decreasing the risk of complications making first class medical treatment much cheaper, and therefore applicable to all patients and easily affordable to hospitals.

17/D20Comprei. Reinraum-Handel- undSchulungs GmbHEuropastraße 10A-9524 VillachT: +43(0)4242/440 [email protected]

Comprei – The Cleanroom Expert. Since 1999 we have specialised in the professional cleaning of cleanrooms of all categories, according to ISO 14644 and GMP protocols. We offer cleaning services that include regular maintenance, and final detailed cleaning (e.g. following construction work, before qualification). In addition we offer sterile room disinfection as well as specialised machine cleaning within cleanrooms. We are also experts in teaching and training cleanroom personnel. We impart theoretical and practical knowledge in day human and weeklong training courses using a specially developed program. Our customers trust our many years of experience and broad expertise.Comprei stands for quality – professionalism – integrity!

3/F64eBioscience, an Affymetrix CompanyCampus Vienna Biocenter 2A-1030 WienT: +43(0)1/796 40 [email protected]: Michael [email protected]

eBioscience, an Affymetrix company, is a lead supplier in flow cytometry and offers a large selection of antibodies and fluorochromes for life science research. In addition, the company‘s portfolio comprises classical as well as bead-based immunoassays for the quantification of cytokines, growth factors, and many other soluble proteins. Besides assays for the quantification of proteins eBioscience also offers reagents for the detection of RNA.Frequently first to market the company develops more than 800 innovative products every year for research in immunology, oncology, cell biology, and stem cell biology.

www.hcl-consult.de

Mühelosbewegen

Mitarbeiterschonen

JetztKontakt

aufnehmen

Betten-movernutzen


Company Profiles

17/C20EMS HandelsgmbHJochingergasse 1A-2100 KorneuburgT: +43(0)2262/616 [email protected]: Alfred [email protected]

EMS manufactures advanced technology and high quality products for electromyography and evoked potentials (EMG/EP), electroencephalography (EEG), intra-operative monitoring (IOM), electric impedance segmentography (EIS), poly EMG, event related potentials (ERP) and supplies a complete range of electrodes and accessories.With more than 30 years experience in Neurophysiology EMS continues to provide innovative technologies for Neurophysiology diagnostic examinations as well as for Electrical Impedance Segmentography monitoring applications. Our products are designed and developed to satisfy the most demanding customer needs and guarantee reliability, quality and flexibility in performance.

17/C20g.tec Guger Technologies OGHerbersteinstraße 60A-8020 GrazT: +43(0)316/675 [email protected]

g.tec was founded in 1999 and is a growing enterprise with two branches in Austria, one in Spain and distribution partners all over the world. Our team of researchers, engineers and developers does all hardware and software development in-house. g.tec developed the first commercially available BCI system in 1999 and sells this now in more than 60 countries worldwide. Our products work with all major BCI approaches (motor imagery, P300, SSVEP and slow cortical potentials), so you can start BCI research within a few hours. The g.tec team tests different BCI technologies on more than 500 subjects internationally to guarantee a perfect working system.New systems focus on stroke rehabilitation, functional mapping as well as locked-in and coma-patients.

3/G60Greiner Bio-One GmbHBad Haller Straße 32A-4550 KremsmünsterT: +43(0)7583/[email protected]

Greiner Bio-One develops and distributes products for clinical diagnostics, the pharmaceutical and diagnostics industry as well as for biotechnology. The company has four business divisions:• Preanalytics manufacture specimen collection systems for hospitals, laboratories and blood banks• BioScience products are for the diagnostics industry, biotechnology and research• Diagnostics specializes in the development of molecular biological analysis methods (DNA-arrays)• As an Original Equipment Manufacturer (OEM) Greiner Bio-One is a long-term partner for the industry

13/A31H+H SYSTEM GmbH Weissenbach 325, A-5350 StroblT: +43(0)6137/217 [email protected]: Tobias [email protected]

The H+H divider system has proved its worth in practice for more than 40 years in all medical areas from the pharmacy to the hospital. Safety and quality obtain top priority in the health care market, shop fitters and all types of businesses prefer organization and presentation. H+H SYSTEM is distributed by our partners in more than 60 countries as well as the H+H SYSTEM Inc. in the USA. H+H SYSTEM, the partner when it comes to medication storage.

17/D20Health Technology ClusterBusiness Upper Austria – OÖ Wirtschafts -agentur GmbH, Hafenstraße 47-51, A-4020 LinzT: +43(0)732/798 10-5155gesundheitstechnologie-cluster@biz-up.atwww.gesundheitstechnologie-cluster.atContact: Nora Mack, BSc, [email protected]

The Health Technology Cluster is one of nine cluster and network initiatives of Business Upper Austria. The Cluster represents a special branch network, which is intended to enhance the levels of innovative strength and international competiveness of companies from the areas of medical and health technology, their suppliers, and related educational and technology transfer bodies. One of the key tasks of the Cluster is an intensification of the cooperation between partner companies, health and R&F facilities.With some 220 partners the Cluster constitutes Austria’s largest network in the medical and health technology area. The main focus of the Health Technology Cluster is on MedTech, especially on the key issues MED-IT and personalized medicine.

© S

erg

Nvn

s -

Foto

lia.c

om


Company Profiles

Hallen / Halls 1, 2, 3 Labortechnik, Diagnostica Laboratory equipment, diagnostics

Hallen / Halls 4, 5 Physiotherapie/ Orthopädietechnik Physiotherapy / orthopaedic equipment

Hallen / Halls 5, 6, 7.0, 7.1, 7a Bedarfs- und Verbrauchsartikel, Textilien Disposables, commodities and consumer goods, textiles

Hallen / Halls 9 – 14 Elektromedizin, Medizintechnik, OP-Technik und Einrichtung Electromedicine, medical technology, operating technology and equipment

Halle / Hall 14 Krankenhauseinrichtung, Kommunikationssysteme Hospital equipment, communication systems

Halle / Hall 15 Informations- und Kommunikationstechnik Information and communications technology

Hallen / Halls 15, 16, 17 Nationale und internationale Gemeinschaftsstände, Elektromedizin, Medizintechnik National and international joint participants, electromedicine, medical technology

Halle / Hall 8a COMPAMED HIGH-TECH FORUM by IVAM

Halle / Hall 8b COMPAMED SUPPLIERS FORUM by DeviceMed

SUPPLIERSFORUM

by

COMPAMED FOREN / FORUMSMEDICA FACHMESSE / TRADE FAIR

EDUCATIONCONFERENCE

CME

MEDICINE+ SPORTSCONFERENCE

KONFERENZEN / CONFERENCES

CCD Süd / South, CCD Pavillon MEDICA EDUCATION CONFERENCE

CCD Süd / SouthMEDICA MEDICINE + SPORTS CONFERENCE

CCD Süd / SouthDiMiMED – INTERNATIONAL CONFERENCE ON DISASTER AND MILITARY MEDICINE

CCD Ost / EastDEUTSCHER KRANKENHAUSTAG

PHYSIOCONFERENCE

CCD Süd / SouthMEDICA PHYSIO CONFERENCE

MEDICA FOREN / FORUMS

Halle / Hall 6 MEDICA WOUND CARE FORUM

TECHFORUM

Halle / Hall 12MEDICA TECH FORUM

HEALTH ITFORUM

Halle / Hall 15 MEDICA HEALTH IT FORUM

ECONFORUM

Halle / Hall 15 MEDICA ECON FORUM by TK

Halle / Hall 15 MEDICA CONNECTED HEALTHCARE FORUM

CCD Ost / EastEUROPEAN HOSPITAL CONFERENCE

WORLD FORUM FOR MEDICINE16 – 19 NOVEMBER 2015Montag – Donnerstag 10.00 –18.30 UhrMonday – Thursday 10.00 am – 6.30 pm

HIGH-TECH SOLUTIONSFOR MEDICAL TECHNOLOGY16 – 19 NOVEMBER 2015Montag – Donnerstag 10.00 –18.30 UhrMonday – Thursday 10.00 am – 6.30 pm

New show days

from Monday to

Thursday!

Online registration

is required!

med1501_01118.indd 1 01.06.15 15:33

3/F56Hycel Handelsgesellschaft m.b.H.Awarenfeldsiedlung 1A-2322 Zwö[email protected]

The Company was founded in Austria in 2012 in order to continue the activities of Biocode Hycel, whose history goes back almost 50 years. Beside the reagents and controls for the installed base of Celly, Diana, Xenia, etc. we provide flame photometers „PHF 108“ and a new range of hematology analyzers: „Hycount 3“ and „Hycount 5“. With „Hychem“ we have also a new biochemistry analyzer for human and veterinary use.

16/B57Ing. Sumetzberger GmbHLeberstraße 108A-1110 WienT: +43(0)1/740 [email protected]: Ing. Peter [email protected]

Sumetzberger is one of the world’s leading suppliers and manufacturers of high quality pneumatic tube systems for the healthcare sector. Yearslong know-how, high-end precision and reliability as well as custom-made pneumatic tube systems make Sumetzberger your ideal partner for your logistics projects. The Sumetzberger team provides you with solutions that meet your needs exactly. Whether it is about transporting lab samples or blood transfusions or about connecting pharmacy robots and laboratory automation systems: Sumetzberger offers well-engineered, comfortably to use solutions.

8b/J29IPL SCHLAUCHTECHNIK GmbHMax-Planck-Straße 1A-9100 VölkermarktT: +43(0)4232/512 93-20www.ipl.it

In 2013 IPL Schlauchtechnik GmbH was founded in Voelkermarkt-Austria and since 2014 it has been manufacturing TPE, Biovinyl, Silicone and Fluoropolymers hoses.IPL has always paid particular attention to product conformity and international certification. IPL hoses have all necessary certifications awarded by independent internationally-renowned laboratories, including certification to pharmaceutical and food industry standards, such as USP Class VI, FDA regulations and European Regulation 10/2011.

17/C20HS Informatik IT-Consulting e.U. Obere Hauptstraße 29A-3485 Grafenegg T: +43(0)2735/[email protected]

HS Informatik - interdisciplinary special experts in security of networked medical devices. Austria’s leading IEC 80001 experts and co-developers of the international standard IEC 80001, world-wide state of the art since 2010 for safe operation of (medical) IT networks with connected medical devices. Our individually tailored business services around IEC 80001: Comprehensive support for putting the new standard into practice: • for hospitals/healthcare facilities, etc. • for manufacturers/vendors of medical devices and/or medical software • for IT manufacturers & vendors and IT service providers

©Fo

tolia

17/D20Human.technology Styria GmbH Reininghausstraße 13, A-8020 GrazT: +43(0)316/587 [email protected]: DI (FH) Gernot [email protected]: +43(0)699/188 997 06

Human.technology Styria is a membership organization for the life science and related industries in Styria. Located in the south east of Austria, Styria is a powerhouse of innovation with world leading-reputations in the following fields: Biobanking and biomarker technologies, pharmaceutical engineering and production processes, advanced biomedical sensor technologies and biomechanics.This expertise is rooted in a strong academic tradition in sciences, reinforced by the presence of the Biobank Graz, the world’s largest certified public biobank, the Austrian Centre of Industrial Biotechnology and the Research Center Pharmaceutical Engineering.

02

01

03

Hotbed of Human Life Science Technology

human.technology.styria


Company Profiles

17/D20Kaleidoscope Communications Solutions GmbH Landstraßer Hauptstraße 99-101 A-1030 Wien T: +43(0)1/2535352 www.kaleidoscope.at Contact: Jakob Dirisamer [email protected]

17/C20Lang + Lang GmbH Technologiering 12 A-4060 Leonding T: +43(0)732/670677 www.langlang.at Contact: Werner Lang [email protected]

You are looking for high quality translations, customized translation management, terminology or review solutions? Kaleidoscope and its subsidiary, eurocom Translation Services, offer a perfect blend of innovative software as well as expert consulting for language technologies, authoring systems, terminology and documentation management. As specialist for clinical and regulatory documents, labelling, IFOs and marketing leading organizations within the MedTech and Pharma industry count on our software and services.

Lang+Lang is market leader of high-quality digital prints on glass, metal, wood, fabric, wallpaper,.. In particular the technology of direct print on glass as well as the broad competence in the field of decorative glass (offering four different technologies for both indoor and outdoor glass applications) make it worldwide unique. Lang+Lang also offers interior design services through its subsidiary 360° decoro and is therefore taking turnkey projects from initial concept phase until final production and installation onsite. Lang+Lang currently runs two manufacturing facilities and five sales offices and deals with customers mainly located in Europe and Middle East.

COMMITTEDEXPERTS

Besuchen Sie unseren Stand auf derVisit us at our stand at

MEDICA 2015 - Halle 3 und Halle 17COMPAMED 2015 - Halle 8B

ADVANTAGE AUSTRIA is the official Austrian trade promotion organisation. With more than 110 offices in over 70 countries we help over 50,000 Austrian

businesses develop their international markets and promote their products and services around the world.

We provide hands-on, practical support for international businesses wishing to build partnerships with and invest in Austria.

www.advantageaustria.org

Medica 2014 inserat.indd 1 14.04.15 15:12

Company Profiles

8b/F03Lenzing Plastics GmbHWerkstraße 2A-4860 LenzingT: +43(0)7672/[email protected]

Lenzing PROFILEN - The medical PTFE yarn specialist:Lenzing Plastics produces a broad range of PTFE yarns for permanent implants. In applications like heart valve manufacturing, surgical sutures as well as stents and meshes PTFE offers exceptional performance. The excellent biocompatibility combined with very soft touch, no limit to the lifespan and very low surface tension offer great opportunities for device manufacturers. PTFE is also an outstanding product for skin protection textiles, like Anti Decubitus bed sheets, garments for Psoriasis patients, or medical compression stockings. The extremely low friction, the cool touch as well as the hydrophobia are perfect characteristics for all kind of medical skin protection textiles.

HEART VALVES HEART VALVES ■

YARNS FOR GARMENTS YARNS FOR GARMENTS FELT FOR PLEDGES FELT FOR PLEDGES

WOUND DRESSINGS WOUND DRESSINGS DENTAL FLOSS DENTAL FLOSS ■ FELT

DENTAL FLOSS DENTAL FLOSS ■ FELT FOR SOCKS FOR RUNNING SOCKS FOR RUNNING

DENTAL FLOSS DENTAL FLOSS ■ FELT FOR BED SHEETS BED SHEETS ■ WOUND

SUTURE YARNS DEN-SUTURE YARNS DEN-HEART VALVES ■ STENTS

SUTURE YARNS SUTURE YARNS ■ FEL GAR-FELT FOR PLEDGES FELT FOR PLEDGES

WOUND DRESSINGS WOUND DRESSINGS FELT FOR PLEDGES FELT FOR PLEDGES

WOUND DRESSINGS WOUND DRESSINGS DENTAL FLOSS DENTAL FLOSS ■ FELT FOR

BED SHEETS BED SHEETS ■ WOUND SUTURE YARNS SUTURE YARNS SOCKS FOR RUNSOCKS FOR RUN

HEART VALVES HEART VALVES ■ STENTS SUTURE YARNS SUTURE YARNS

FELT FOR PLEDGES FELT FOR PLEDGES WOUND DRESSINGS WOUND DRESSINGS

DENTAL FLOSS DENTAL FLOSS ■ FELT FOR BED SHEETS BED SHEETS ■ SOCKS FOR

DENTAL FLOSS ■ FELT FOR PLEDGES ■ HEART VALVES BED SHEETS ■ WOUND DRESSINGS ■ YARNS FOR GARMENTS SUTURE YARNS ■ DENTAL FLOSS VALVES ■ STENTS ■ BED SHEETS FOR GARMENTS ■ SUTURE YARNS FOR PLEDGES ■ SUTURE YARNS PLEDGES ■ HEART VALVES ■ STENTS DENTAL FLOSS ■ SUTURE YARNS PLEDGES ■ HEART VALVES ■ STENTS DRESSINGS ■ YARNS FOR GARMENTS FLOSS ■ FELT FOR PLEDGES ■ HEART VALVES SHEETS ■ SOCKS FOR RUNNING MENTS ■ SUTURE YARNS ■ DENTAL FLOSS HEART VALVES ■ STENTS ■ BED SHEETS ■ WOUND DRESSINGS SUTURE YARNS ■ DENTAL FLOSS ■ FELT FOR PLEDGES VALVES ■ STENTS ■ BED SHEETS ■ WOUND DRESSINGS FOR GARMENTS ■ SUTURE YARNS ■ DENTAL FLOSS PLEDGES ■ HEART VALVES ■ STENTS ■ BED SHEETS DRESSINGS ■ YARNS FOR GARMENTS ■ SUTURE YARNS SUTURE YARNS ■

FELT FOR PLEDGES ■ SOCKS FOR RUNTAL FLOSS ■ FELT FOR PLEDGES ■ HEART VALVES SOCKS FOR RUNNING ■ DENTAL FLOSS ■ SUTURE YARNS SUTURE YARNS ■ DENTAL FLOSS ■ FELT FOR PLEDGES VALVES ■ STENTS ■ BED SHEETS ■ WOUND DRESSINGS FOR GARMENTS ■ SUTURE YARNS ■ DENTAL FLOSS PLEDGES ■ HEART VALVES ■ STENTS ■ BED SHEETS

PTFE yarns for Medical & Functional Textiles

Surgical Sutures

Decubitus Prophylaxis

Diabetic Foot

www.lenzing-plastics.com

DENTAL FLOSS

PLEDGES HEART VALVES STENTS

FELT FOR PLEDGES WOUND DRESSINGS

DENTAL FLOSS DENTAL FLOSS

DENTAL FLOSS ■ FELT FOR PLEDGES ■ WOUND DRESSINGS

SUTURE YARNS ■ DENTAL FLOSS SUTURE YARNS ■ DENTAL FLOSS

DENTAL FLOSS

DENTAL FLOSS SOCKS FOR RUNNING

DENTAL FLOSS BED SHEETS

SUTURE YARNS DEN-

SUTURE YARNS DENTAL FLOSS STENTS ■ SOCKS FOR RUNNING

SUTURE YARNS ■ DENTAL FLOSS STENTS ■ BED SHEETS

YARNS FOR GARMENTS ■ SUTURE YARNS DEN-

STENTS DENTAL FLOSS SUTURE YARNS ■ DENTAL FLOSS

SUTURE YARNS DEN-HEART VALVES

SUTURE YARNS ■

WOUND DRESSINGS

YARNS FOR GARMENTS ■ SUTURE YARNS DEN-HEART VALVES

■ SUTURE YARNS DENTAL FLOSS ■

BED SHEETS WOUND DRESSINGS

SUTURE YARNS DEN-YARNS FOR GARMENTS ■ SUTURE YARNS DEN-

9/C48Leonhard Lang GmbHArchenweg 56A-6020 InnsbruckT: +43(0)512/334 [email protected]: Bettina Sarlay

We design, manufacture and distribute products for ECG, electrosurgery, defibrillation and stimulation as well as gels and fixations. As part of our commitment to provide the highest quality service and products and our desire to meet your future requirements, we have formed strong partnerships with renowned companies around the world. Our quality management system is certified according to ISO 9001, ISO 13485 and ISO 13485 CMDCAS and for some product lines to Annex II of the European Medical Device Directive. We also operate an environmental management system certified to ISO 14001.

SKINTACT® EASIBEATMULTIFUNCTION DEFIBRILLATION ELECTRODES

17/D20LISA – Life Science AustriaWalcherstraße 11A A-1020 WienT: +43(0)1/501 [email protected]: Eva Maria [email protected]

17/D20LISAvienna – Life Science Austria Vienna Walcherstraße 11A A-1020 Wien T: +43(0)1/501 75 358 www.LISAvienna.at Contact: Martin Mayer [email protected]

Life Science Austria (LISA) promotes the life science sector in Austria on the international stage and is the first point of call for enquiries relating to it. Organised through the regional life science clusters - ecoplus, Health Technology Cluster, LISAvienna, Human Technology Styria and Cluster Life Sciences Tirol, LISA represents companies in the therapeutic, medical technology and diagnostic sectors as well as providers of enabling technologies. Austria Wirtschaftsservice GesmbH (aws) on behalf of the Federal Ministry of Science, Research and Economy runs LISA.

LISAvienna is the joint life science platform operated by austria wirtschaftsservice and the Vienna Business Agency. On behalf of the Austrian Federal Ministry of Science, Research and Economy and the city of Vienna, it contributes to the advancement of life sciences in Vienna. LISAvienna supports innovative biotech, pharmaceutical and medical technology companies in Vienna that develop and market new products, services and processes. The platform links these companies with development partners and key customers. As a central knowledge carrier, LISAvienna provides input for decisions to advance the life sciences in Vienna.

3/F64Lohmann & Rauscher GmbHJohann-Schorsch-Gasse 4A-1141 WienT: +43(0)1/576 [email protected]

Lohmann & Rauscher (L&R) is a leading international supplier of forward-looking medical devices and hygiene products of the highest quality. The range includes products and services for wound management, bandages and dressings, OR set systems, negative pressure wound therapy and consumer hygiene products.

In 2013, the globally active and networked business with Austrian and German roots achieved annual sales of 530 million euros. L&R has more than 4,000 employees and is represented by 39 affiliates and shareholdings in 21 countries. L&R is planning to continue to expand in the next years, especially internationally.


Company Profiles

17/D20Lugitsch-Strasser Medizintechnik GmbHSchildbach 119A-8230 HartbergT: +43(0)3332/[email protected]: Werner Kobenter

Lugitsch-Strasser GmbH is a specialist in the field of medical technology services. Our clients are clinics, hospitals, veterinary facilities, and academic and pharmaceutical research laboratories. Amongst others, our business concentrates on sales, installation and maintenance of steam-sterilizers, cleaning disinfectors, bedpan washers.Another focus of our company lies on development, design and production of wastewater sterilization systems. With these systems, biologically polluted wastewater from specialized laboratories is treated thermally and thus, can be disposed of in an environmentally-friendly way.

3/F72MED TRUST HandelsgesmbHGewerbepark 10A-7221 MarzT: +43(0)2626/641 [email protected]/enContact: Mag. Sylvia [email protected]

MED TRUST is an Austrian manufacturer and international diabetes specialist who offers new innovative products, marketing and distribution concepts for a modern supply channel in the health care sector. The Austrian company is internationally successful with its own high-quality brands Wellion and WellionVet. MED TRUST is an Austrian family business, and includes companies in Austria, Germany, Sweden, Greece, Czech Republic, Bulgaria, Ukraine, Slovakia, Slovenia, Netherlands, Portugal, and Croatia. Our goal is to make life easier for patients and partners with innovative ideas, advice and service.

LUGITSCH•STRASSERM E D I Z I N T E C H N I K G

MBH

Advancing Austrian life science //at the heart of Europe> Innovative Cancer, Vaccine and Infectious Disease Therapeutics> Medical Technologies Along the Whole Value Chain> Production and Platform Technologies> Advanced Analytics and Diagnostics www.lifescienceaustria.at

Learn more about our excellence in

LISA_ANZ_LEARNMORE_Stethoskop_180x121_RZ.indd 1 16.07.14 10:4656. Jg. (2015), ÖKZ EXTRA: Export & MEDICA | www.schaffler-verlag.com ÖKZ EXTRA: Export & MEDICA 17

Company Profiles

12/A23METEKA GmbH Viktor-Kaplan-Straße 7A-8750 JudenburgT: +43(0)3572/[email protected]: Mag. Andreas [email protected]

METEKA stands for excellent knowledge and reliable products for the treatment of infectious waste and waste water. The METEKA hygiene and infection prevention system reduces hospital acquired infections and offers a safe, economical and environmentally friendly solution. METEKA has succeeded in establishing a successful market presence in the field of hygiene and disposal, both in Austria and internationally.

3/F56MICROS Produktions- & HandelsgesmbHHunnenbrunn, Gewerbezone 5A-9300 St. Veit/GlanT: +43(0)4212/309 [email protected]

Company MICROS Austria was founded in 1994 with its main business the production and trade of microscopes and microtomes. Ergonomic designs and high quality optics for a variety of applications ensure the success of the product. The company originally was founded to sell high-quality microscopes at affordable prices in Austria, but now, years later, MICROS sells microscopes and microtomes in countries all over the world. In 2014 MICROS developed its new line SECTIONS - sample preparation, with which instruments for creating high quality samples for analyzing are offered.

10/B42MIDES Healthcare Technology GmbHWeinholdstraße 33A-8010 GrazT: +43(0)316/426 [email protected] www.mides.com

3/F56MÜLLER Medizinische Labormesstechnik Ges.m.b.H. Güpferlingstraße 11 A-1170 Wien T: +43(0)1/485 43 77 www.muellerwien.at Contact: DI Dr. Christian Müller [email protected]

MIDES is the leading service provider in certified Ultrasound Probe Repair for Standard-, 3D/4D- and TEE-probes in Europe.With more than 20 years’ experience, MIDES is certified according to ISO 9001 and ISO 13485 and is able to repair cost-effectively electronic, mechanical and all other defects. The company is offering this service in more than 52 different countries worldwide and is also specialized now in repair of Endo-sono (Ultrasound Endoscopes). A big range of Ultra Sound systems, new and refurbished, completes the portfolio of MIDES – many of them are available on stock.

CRS® – The metabolism screening systemThe CRS-analysis system is the first measuring device worldwide to offer a non-invasive Screening method for identifying the regulation of the cellular metabolism. The optical measuring takes place on the ball of the thumb within a few seconds. Using a Measurement probe, the autofluorescence of endogenous metabolic substances is registered non-invasively.

17/C20Mobilitas Health Group Forschungs- undVertriebs GmbHAm Thalbach 3, A-4600 ThalheimT: +43(0)7242 65162-13www.mobilitas-group.comContact: Silvia [email protected]

We want you as a business partner!We are a manufactory of special kinds of bandages – we call them “sleeves”, because you use our products mostly by NIGHT! We are selling these products since more than 20 years very successfully on the Austrian market as a brand named “Staudt Therapy Sleeves”.These sleeves have on the inside a special kind of net, which gives you while sleeping for 7-8 hours a micro massage, which has a positive effect to the blood circulation and to the lymphatic system. Our products and the whole “Staudt Therapy” are a perfect combination to all products on each market.Our product portfolio includes Staudt Therapy Sleeves, Staudt Gel, Staudt Drink, Staudt Capsules.

Medizinische Labormesstechnik Ges.m.b.H.


Company Profiles

1/C40Norma Diagnostika GmbHHauptstraße 7A-3011 UntertullnerbachT: +43(0)2233/528 87www.normadiagnostika.comContact: Christa [email protected]

8b/F03PAYER Medical GmbHReiteregg 6, A-8151 St. BartholomäT: +43(0)3123/2881-0www.payergroup.comContact: Eva [email protected]

Norma Diagnostika GmbH is a designer and supplier of innovative blood analysis systems serving the in-vitro diagnostic (IVD) market. Norma operates globally from its headquarters in Austria. Norma offers high quality, cutting edge products and excellent services, the product range of analyzers and reagents for clinical chemistry, hematology and ion selective analyzers for human medical and veterinary clinics. The company exclusively supplies trained authorized distributors who are responsible for providing the appropriate after sales service. Norma has operating facilities in Austria and Hungary.

PAYER Medical is your competent partner for the manufacture of innovative medical devices. The focus of its activity is the development and production of system components, devices and consumables for the fields of in-vitro diagnostics and homecare diagnostics. PAYER develops and realises new ideas and concepts based on our competence in development, industrialisation, mould and tool making, plastics engineering and assembly. Another important part is the production of electrochemical sensors – a high tech component for the determination of medical parameters.

17/D20Novotech Elektronik GmbHFreistädter Straße 38A-4210 GallneukirchenT: +43(0)7235/638 88-14www.rehatron-alpha.euContact: Ing. Helmut [email protected]: +43(0)664/413 18 37

Novotech Elektronik is developing, manufacturing and selling beside electronic solutions for industrial applications a non-invasive magnetic nanoimpuls device called REHATRON-Alpha.We are a medium sized company with 50 employees and located in the Linz area.

17/D20PHOTONIC Optische Geräte GmbH & Co. KGSeeböckgasse 59A-1160 WienT: +43(0)1/486 56 [email protected]: Mag. Annette [email protected]

PHOTONIC - a member of the WILD Group - develops, manufactures and distributes opto-mechatronic products such as universal lighting modules, complete light sources as well as security technology equipment.To satisfy its own standard of continuous innovation, PHOTONIC constantly develops concepts for use under challenging conditions as well as the necessary miniaturisation and system optimisation.PHOTONIC is established in segments such as medical technology (endoscopy / microscopy), life science and security technology and is continuously expanding its applications for industrial use.

8a/L01S.I.E System Industrie Electronic GmbHMillennium Park 12A-6890 LustenauT: +43(0)5577/899 [email protected] www.sie.atContact: M. Eng. Stephanie Hartl

S.I.E is a leading supplier of Embedded Computing Systems and modular HMI systems. The vast array of services S.I.E provides ranges from modular HMI-components to the full development responsibility of an entire embedded computing system - everything from a single source. Well-known companies in medical, analytical-, bio- & laboratory, industrial and security markets count on S.I.E in high-end-products. Embedded PCs, Industrial PCs (1HE, 2HE, 4HE), HMI - Solutions Hardware/Software, customized Embedded and HMI solutions, services in the area of Embedded Solutions - a part of our competence.


Company Profiles

8b/F03SEIDEL Elektronik GmbH Nfg. KG Frauentalerstraße 100 A-8530 Deutschlandsberg T: +43(0)3462/6800-0 www.seidel.at

3/F56Sony DADC Austria AGBioSciencesSonystraße 20A-5081 Anif, SalzburgT: +43(0)6246/880 [email protected]

8b/F03Stadler Sensorik, CNC-Technik GmbH Gewerbepark Süd 2 A-8121 Deutschfeistritz T: +43(0)3127/40930 0 Contact: Viktoria [email protected] www.stadlercnc.at

SEIDEL ELEKTRONIK is a manufacturer of custom-made solutions and an outsourcing partner for your electronic and mechatronic product requirements. The company offers a range of services from conception and R&D through Supply Chain Management to production. Comprehensive after sales services are also offered. Electronics in good hands! SEIDEL stands for dynamic growth, ecological and economic sustainability and makes high demands on quality for their products. Highly motivated and well trained staff with many years of expertise and standardized processes according to ISO 9001, ISO 14001, ISO 13485 and ISO/TS 16949 form the basis to become a leading service provider for EMS. With additional locations in Hungary, Slovakia, Slovenia and Austria - Seidel Group counts more than 660 employees.

In 2009 Sony DADC entered into the Life Sciences and IVD market and established its BioSciences business unit. Customized polymer products are manufactured from its base in Anif, Salzburg, and developed for medical and diagnostic applications to enable, for example, faster high-precision identification of bacteria. This ensures a more accurate diagnosis to assist in providing patients with proper treatment.Sony DADC BioSciences operates globally and is currently the world leader in micro-structured polymer parts. With more than 25 years of experience in manufacturing optical storage media, it guarantees high quality and reliable production of smart polymer parts to fully meet customer requirements and specifications.

Right from the start our company is focussed on the production of individual parts right through to medium-sized production series of a wide range of materials: stainless steel, aluminium alloys, non-ferrous metals, plastics as well as special materials like tantalum, molybdenum and titanium. We are focussed on the production of precision parts with medium right down to tinniest dimensions.Using the following technologies we work on implementing your ideas in practice and bringing shape to your designs: CNC-turning, CHN-milling, Pipe-wire banding, plastic injection moulding, laser welding, assembling.

17/D20Standortagentur Tirol/Cluster Life Sciences TirolIng. Etzel-Straße 17/2, A-6020 InnsbruckT: +43(0)512/576 262 [email protected]: DDr. Petra Stö[email protected]: +43(0)676/843 101 24

Tirol is one of the major Life Science regions in Austria with globally operating companies, renowned universities and research centers, highly skilled and motivated employees as well as above-average funds for scientific research. The Cluster Life Sciences Tirol coordinates a strong network of partners and the sector’s activities. The medical technology sector boasts a particularly diverse spectrum of expertise in the cluster. Furthermore, the investor services of Standortagentur Tirol offer an extensive service free of charge for those companies interested in Tirol as business location. The Cluster Life Sciences Tirol is financed by the Region of the Tirol and the European Regional Development Fund (ERDF).

8a/L04STARLIM Spritzguss GmbH Mühlstraße 21A-4614 MarchtrenkT: +43(0)7243/585 [email protected]

starlim//sterner manufactures silicone rubber parts for the medical industry, the pharmaceutical sector and the baby-article industry. The cleanroom manufacturing and state of the art production conditions guarantee the highest levels of processing quality.The company is the world’s largest processor of liquid silicone rubberand specializes in the mass production of silicone and multi-component products (silicone/thermoplast) and operates more than 200 liquid injection moulding machines. starlim//sterner takes over full responsibility from development to production orders - from idea to product design, in-house tool engineering up to automated high volume production.


Company Profiles

3/F56Technoclone GmbHBrunner Straße 67A-1230 WienT: +43(0)1/863 [email protected]: Mr. Marijn Tor

Technoclone is a world leading producer not only of ELISA systems but also of global and special coagulation tests, control and reference plasmas and protein and lipid diagnostics. With Ceveron® alpha, a fully automated coagulation analyzer, the portfolio has been completed. Another innovation is the Ceveron® MFU500, a micro particle filtration unit which can identify micro particles thrombogenicity in conjunction with the assay Technothrombin® MP.

17/D20THI Total Healthcare Innovation GmbHGewerbestraße 4A-9181 FeistritzT: +43(0)4228/301 [email protected]: Mag. Silke [email protected]

The THI Total Healthcare Innovation GmbH is an Austrian company, which is active in the field of medical technology and specialized in research, development and production of innovative medical devices in the field of orthopedics and traumatology. The company also deals with surgical infection prevention systems for hospitals.The R&D department of the company developes highly innovative and technologically high-quality products to protect patients from possible infections during surgery. The OXYGEN Aerolyte Helmet provides the best climate and avoids harmful CO2 emissions inside the helmet with the world wide unique and patented Two-Fan-Technology.

· Cluster Life Sciences Tirol Standortagentur Tirol· www.standort-tirol.at/lifesciences

Hier geht’s zum Download des aktuellen Branchenkatalogs der Tiroler Medizintechnik!

Medizintechnik Made in Tirol

Stark, vielfältig und innovativ!


Company Profiles

17/D20TissueGnostics GmbH Taborstraße 10/2/8 A-1020 Wien T: +43(0)1/216 11 90 www.tissuegnostics.com Contact: Dr. Rupert Ecker [email protected]

17/C20VASEMA GmbH Brunner Str. 67, Objekt 4, 1. Stock A-1230 Wien T: +43(0)1/890 48 33-0 www.vasema.com Contact: Peter Hagl [email protected]

TissueGnostics GmbH is an ISO 13485 certified medtech enterprise. Our analytical instruments and image analysis solutions are used in routine diagnostics, clinical studies, as well as research (oncology, immunology, stem cells). The company has been founded 2003 and has offices in Europe, USA, and China. We have been member of the AIDPATH network for future trends in Digital Pathology. Very more than 200 reference publications of our customers in 27 countries in scientific top journals testify the high quality of our products!

The company VASEMA GmbH is a turnkey supplier of Skin Analysis Measurement Systems that allow a diagnosis and therapy via the skin. The product dermaMeter® professional 100 is with 19 Indications in hospitals already in use and allows an immediately diagnosis and therapy monitoring. The product dermaMeter® professional 100 is a Skin Analysis Device that allows painless clinical parameter to diagnose within 16 seconds by noninvasive touch of the skin. The diagnosis contains the disease as well as the severity and enable the therapy with repeated measurement to document the changes and forecasts of healing. Due to use by infections, wounds, tropical disease as well as skin diseases, the mobile use of the device for physicians is like a Stethoscope.

3/F64 ViennaLab Diagnostics GmbHGaudenzdorfer Gürtel 43-45A-1120 ViennaT: +43(0)1/812 01 [email protected]: Mariella Vicente de Huebner

ViennaLab Diagnostics develops, manufactures and exports worldwide in vitro diagnostic tests for inherited diseases, genetic predispositions, pharmacogenetics and oncology. The company offers “StripAssays” and real-time PCR assays for Cardiovascular Disease, Thalassemia, Cystic Fibrosis, Familiar Mediterranean Fever, Alzheimer Disease, Sugar Intolerance, etc., as well as pharmacogenetic and oncology tests which help to predict a patient’s response to different drug and antibody therapies (melanoma, colorectal, lung and thyroid cancer, anti-coagulation therapy, etc.).

3/F72West Medica Produktions- und Handels GmbHFranz-Siegel-Gasse 1A-2380 PerchtoldsdorfT: +43(0)1/804 81 [email protected]: Mag. Marie [email protected]

West Medica, founded in 1993 and headquartered in Perchtoldsdorf, specializes in the manufacture and distribution of diagnostic equipment. WM Group produces a complete line of equipment for the digital Pathology, Vision Microscopy. Our market experience supported by close cooperation with our dealers enables us to produce and supply high quality medical products.

17/D20WILD GruppeWildstraße 4A-9100 VölkermarktT: +43(0)4232/2527-158www.wild.atContact: Adrian [email protected]

WILD is the “most trusted” partner for contract development and manufacturing in the field of opto-mechatronic systems for medical technology and technical optics. We offer complex systems and devices as well as comprehensive solutions.At request, we accompany our customers across the whole life cycle, from idea to end of life. Intelligent processes are individually and reliably adapted to the customer‘s needs.WILD can count on more than 40 years of expertise and is member of the WILD group.


Company Profiles

8b/F03Wittmann Battenfeld GmbH Wiener Neustädter Straße 81A-2542 KottingbrunnT: +43(0)2252/[email protected]: Werner Eibl

WITTMANN BATTENFELD, a company of the WITTMANN group is a leading manufacturer of injection molding machines and equipment for the plastics industry. With its own sales and service companies as well as representations in about 60 countries, WITTMANN BATTENFELD provides optimal support to its customers in all matters concerning injection molding technology. Our innovative strength, highest precision and strong focus on maximum customer benefit make us a valuable partner for our customers.

ERGÄNZUNGEN

8b/F03kdg OPTICOMP c/o kdg mediatech GmbHElbigenalp 91A-6652 ElbigenalpT: +43(0)5634/500 700www.kdg-opticomp.comContact: Mag. Christine [email protected]

6/J32Moltoplast GmbH Egger-Lienz-Straße 130A-6020 InnsbruckT: +43(0)512/585 [email protected]: Denise Unterwurzacher

3/F56P.G.F. Industry Solutions GmbHNeutorstraße 19A-5020 SalzburgT: +43(0)662/[email protected]: Petra Jägersberger

kdg OPTICOMP is a byword for high-precision optical moulding and the production-oriented development and manufacture of customized freeform optics. kdg OPTICOMP was set up in 2013 as a new technology unit of kdg enterprises based in Tyrol‘s Lech Valley. Nevertheless, still very young on the market, the company was able to already convince various well-known brands in the areas of medical technology, sensor technology and technical lighting. kdg OPTICOMP develops and manufactures high-precision optical components, primarily for technical LED applications. The specialty of the company is a tight and early integration of optical design and manufacturing.

Moltoplast was founded in 1955 as the first foam processing plant in Austria. The facilities in Austria were regularly expanded up to a total area of more than 10.000 m2, used for production and storage. The healthcare division manufactures and sells worldwide healthcare products as care-mattresses and positioning aids. In 2007 the wound care and decubitus prophylaxis product momosan® was authorized for the EU and worldwide distribution was successfully started. momosan® has a very advantageous price in combination with a simple application and the product safety standard of an European medical product of class IIb.

P.G.F. Industry Solutions GmbH was founded in 2005, based on over 25 years of experience in Research Development, Production and worldwide distribution of medical and engineering measurement products.

Since 2007 P.G.F. has been engaged exclusively in the development and production of medical product solutions like waterbased wound irregation solutions, wound gels, alcohol-free mouth rinse, herpes sprays/gels, and athlete’s foot solutions.


Company Profiles

WORLD FORUM FOR MEDICINE

BE PART OF IT!

16–19 NOVEMBER 2015DÜSSELDORF GERMANY

FOR FOR WORLD FOR FOR FOR

New show days

from Monday to

Thursday!

Online registration

is required!

2015

-07-

07 M

EDIC

A 20

15_Ö

ster

reic

h_21

0x29

7+3_

ÖKZ

Extr

a_4c

Gesell GmbH & Co. KG

Sieveringer Straße 153 _ A-1190 WIEN

Tel.: (01) 3205037 _ Fax: (01) 3206344

[email protected] _ www.gesell.com

www.medica.de

2015-07-07 MEDICA 2015_Osterreich_210x297+3_OKZ Extra_4c.indd 1 07.07.15 11:53

Austrian Exhibitors at Medica 2015

Documents

Transcript of Austrian Exhibitors at Medica 2015