Australian Designed & Engineered - FGS Solace 2019.pdf · The Solace Pool Gate Closer is FGS...
Transcript of Australian Designed & Engineered - FGS Solace 2019.pdf · The Solace Pool Gate Closer is FGS...
Australian Designed & Engineered
The Solace Pool Gate Closer is FGS Hardware’s unique solution for soft closing pool gates. Engineered and tested to withstand Australian conditions, the Solace provides a smooth and soft close that is fully adjustable.
The Solace has been successfully tested to 40,000 cycles in the NATA Accredited FGS Hardware Engineering Lab, and is fully compliant with AS1926-1 2012.
Available in a variety of mounting options, including base, wall and glass mount, the Solace is suitable for any pool gate application.
Our range of eight Solace Kits include all required patches, pivots and fixings to complete the installation of the Solace Closer
Technical Features:
• Aluminium body• 316 Stainless Steel Spindle Receiver Plate• 316 Stainless Steel Cover Plates• Suitable for 10 and 12mm glass• Maximum Gate Weight - 100kg• Maximum Gate Width - 1000mm• Double Valve Speed Adjustment• Unique Serial No. ensuring traceability• Available in Polished, Satin & Matte Black
Australian Designed & Engineered
FGS Pronto Solace Gates all include the cut out to comply with Clause 2.3.3 of AS 1926.1-2012
BASE MOUNT CONFIGURATIONS SOL KIT1Glass to Wall
SOL KIT2Glass to Glass 180 0
SOL KIT5 Glass to Glass 90 0 Left
SOL KIT6 Glass to Glass 90 0 deg Right
WALL & GLASS MOUNT CONFIGURATIONSSOL KIT3Glass to Wall
SOL KIT4Glass to Glass 180 0
SOL KIT7 Glass to Glass 90 0 Left
SOL KIT8 Glass to Glass 90 0 deg Right
Glass to Glass 180° Glass to Glass 90° Glass to Wall/Post
Available Configurations
Base Mount Wall Mount Glass Mount 180° Glass Mount 90°
FGS Pool Fencing
Online Ordering Now AvailableView all pricing and place orders online
Enquiries : 1300 379 793Australia Wide Distribution
Melbourne | Gold Coast | Adelaide | Sydneywww.fgs.com.au
Australian Designed & Engineered
• Grade A 12mm Toughened Safety Glass• Flat Polished Edges• Engineered and Toughened to Australian Standards• Available in 100 - 2000mm in 50mm increments• Gates and Hinging Panels available to suit Solace• Nation-wide Glass Transport Available
B18page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
FF200Top Patch Fitting316 Grade Stainless Steel Covers
Technical Details• PIvot point can be set between 55 - 65mm• 316 Grade Stainless Steel Cover Plates• Suitable for 10 or 12mm glass• Maximum door weight = 100kg• Pivot point set at 55mm or 65mm• Compatible with all FGS Pivots• Available with no insert to be used with Pool Hinge Panel & FPF2-180
Available Finishes• #316 Satin stainless steel• #316 Polished stainless steel
Specify at time of order• Finish required• FF200 B - No insert (to suit FPF2 - Glass to Glass Range)
148Ø20
R55
68
36
37
R80
GLASS DETAIL
51
Pivot point set at 55 or 65mm
163
51
ELEVATION END VIEW
31
51
B19page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
FPF1
1/1
11
22
33
44A
A
B
BCDEF
G
G
H
H
Index QuantityMassPart Number Material NameDescription
Drawn by:
Date:
Rev Folio
9/21/2015
ADMIN
Material: Mass:- General Tolerances:
General Surface Finish:
Project:
C
A3
0.2kg
ISO 2768-1 Medium
-
-Glass �xed bottom pivot
Part Number: Scale1 : 1
Coating:-
Pool gate top pivot assembly - WM
75-77 Ricketts RdMt Waverley VIC 3150
Ph: +61 3 8562 0888 Fax: +61 3 8562 0899
Mnf Drawing No.:
Description:Checked by:
10247.A
FPF1
MnfDrwNo
2 GMC-009 10251.A Crowned pivot pin (M8 internal thread) 316 0.022kg 11 GMC-008 10246.B Pool gate top pivot bracket - WM 316 0.168kg 1
3 HCM8C20-316 NA Hexagon Socket Countersunk Head Screw ISO 10642 - 316 - M8 × 20 316 0.010kg 1
98
2522
42
98
1/1
11
22
33
44
A
A
B
BCDEF
G
G
H
H
Index QuantityMassPart Number Material NameDescription
Drawn by:
Date:
Rev Folio
9/21/2015
ADMIN
Material: Mass:- General Tolerances:
General Surface Finish:
Project:
C
A3
0.2kg
ISO 2768-1 Medium
-
-Glass �xed bottom pivot
Part Number: Scale1 : 1
Coating:-
Pool gate top pivot assembly - WM
75-77 Ricketts RdMt Waverley VIC 3150
Ph: +61 3 8562 0888 Fax: +61 3 8562 0899
Mnf Drawing No.:
Description:Checked by:
10247.A
FPF1
MnfDrwNo
2 GMC-009 10251.A Crowned pivot pin (M8 internal thread) 316 0.022kg 11 GMC-008 10246.B Pool gate top pivot bracket - WM 316 0.168kg 1
3 HCM8C20-316 NA Hexagon Socket Countersunk Head Screw ISO 10642 - 316 - M8 × 20 316 0.010kg 1
98
2522
42
98
148Ø20
R55
68
36
37
R80
GLASS DETAIL - TOP OF GATE
1/1
1
1
2
2
3
3
4
4
AA
BB
C
D
E
F
GG
HH
Inde
xQ
uant
ityM
ass
Part
Num
ber
Mat
eria
l Nam
eD
escr
iptio
n
Dra
wn
by:
Dat
e: Rev
Folio
9/21
/201
5
AD
MIN
Mat
eria
l:M
ass:
-G
ener
al T
oler
ance
s:
Gen
eral
Sur
face
Fin
ish:
Proj
ect:
C
A3
0.2k
g
ISO
276
8-1
Med
ium
-
-Sola
ce
Part
Num
ber:
Scal
e1
: 1
Coat
ing:
-
Pool
gat
e to
p pi
vot a
ssem
bly
- WM
75-7
7 Ri
cket
ts R
dM
t Wav
erle
y VI
C 31
50Ph
: +61
3 8
562
0888
Fax:
+61
3 8
562
0899
Mnf
Dra
win
g N
o.:
Des
crip
tion:
Chec
ked
by:
1024
7.A
FPF1
Mnf
Drw
No
2G
MC-
009
1025
1.A
Crow
ned
pivo
t pin
(M8
inte
rnal
thre
ad)
316
0.02
2kg
11
GM
C-00
810
246.
BPo
ol g
ate
top
pivo
t bra
cket
- W
M31
60.
168k
g1
3H
CM8C
20-3
16N
AH
exag
on S
ocke
t Cou
nter
sunk
Hea
d Sc
rew
ISO
106
42 -
316
- M8
× 20
316
0.01
0kg
1
98
2522
42
98
59±2
25
42
Slimline Glass to Wall Pivot
Technical Details• Used on pool gates in conjunction with
a top patch fi tting to allow the gate to pivot from a wall or post.
• Can be attached to a wall or post - use M6 countersunk stainless steel or 14G Wood ScrewCompatible with:
• FF200 Top Patch Fittings or CAS 42400• Solace Wall Mount SOL WM
Available Finishes• 316 satin stainless steel• 316 polished stainless steel • Electroplated black
Specify at time of order• Required fi nish
Available to be purchased as part of a Solace Self Closing Pool Gate Kit SOL KIT1 - Base MountSOL KIT3 - Wall Mount
B20page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
FPF2-180180 degree SlimlineGlass to Glass Pivot
Technical Details• Used on pool gates with 2 top patch fi ttings
to allow the gate to pivot from another glass panel
• Fixing screws provided with Top Patch Fitting
Compatible with:• FF200 Top Patch Fittings or CAS 42400 PG• Solace Glass Mount SOL GM 180
Available Finishes• 316 satin stainless steel• 316 polished stainless steel• Electroplated black
Specify at time of order• Required fi nish
Available to be purchased as part of a Solace Self Closing Pool Gate Kit SOL KIT2 - Base MountSOL KIT4 - Glass Mount
Gate
FPF2-180 SlimlineGlass to Glass Pivot
FF200 or CAS42400Top Patch Fittings
Hinge Panel
148
161
R 8036 R 55
Ø 20
37
68
R 5537
Ø 2068
36
148
161
R 80
6 - 8
1/1
11
22
33
44
A
A
B
BCDEF
G
G
H
H
Index QuantityMassPart Number Material NameDescription
Drawn by:
Date:
Rev Folio
9/21/2015
ADMIN
Material: Mass:- General Tolerances:
General Surface Finish:
Project:
C
A3
0.4kg
ISO 2768-1 Medium
-
-Glass �xed bottom pivot
Part Number: Scale1 : 1
Coating:-
Pool gate top pivot assembly - GM 180
75-77 Ricketts RdMt Waverley VIC 3150
Ph: +61 3 8562 0888 Fax: +61 3 8562 0899
Mnf Drawing No.:
Description:Checked by:
10257.A
FPF2-180
MnfDrwNo1 GMC-009 10251.A Crowned pivot pin (M8 internal thread) 316 0.022kg 12 GMC-012 10254.A Pool gate top pivot bracket - GM 180 316 0.340kg 13 HCM8C20-316 NA Hexagon Socket Countersunk Head Screw ISO 10642 - 316 - M8 × 20 316 0.010kg 1
260
33
22
70
6
1/1
1122
33
44
A
A
B
BCDEF
G
G
H
H
Index QuantityMassPart Number Material NameDescription
Drawn by:
Date:
Rev Folio
9/21/2015
ADMIN
Material: Mass:- General Tolerances:
General Surface Finish:
Project:
C
A3
0.4kg
ISO 2768-1 Medium
-
-Glass �xed bottom pivot
Part Number: Scale1 : 1
Coating:-
Pool gate top pivot assembly - GM 180
75-77 Ricketts RdMt Waverley VIC 3150
Ph: +61 3 8562 0888 Fax: +61 3 8562 0899
Mnf Drawing No.:
Description:Checked by:
10257.A
FPF2-180
MnfDrwNo1 GMC-009 10251.A Crowned pivot pin (M8 internal thread) 316 0.022kg 12 GMC-012 10254.A Pool gate top pivot bracket - GM 180 316 0.340kg 13 HCM8C20-316 NA Hexagon Socket Countersunk Head Screw ISO 10642 - 316 - M8 × 20 316 0.010kg 1
260
33
22
70
6
148Ø20
R55
68
36
37
R80
HINGE PANEL GATE
148 Ø20
R55
6837
36
R80
B21page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
FPF2-90(Left or Right)
90 degree SlimlineGlass to Glass Pivot
Technical Details• Used on pool gates in conjunction with
2 top patch fi ttings to allow the gate to pivot from another glass panel at 90 degrees
• Left and Right confi gurations available Specify at time of order
Available Finishes• 316 satin stainless steel• 316 polished stainless steel• Electroplated black
Specify at time of order• Required fi nish• FPF2-90L - Left • FPF2-90R - Right
Available to be purchased as part of a Solace Self Closing Pool Gate Kit SOL KIT5 - Left Base MountSOL KIT6 - Right Base MountSOL KIT7 - Left Glass MountSOL KIT8 - Right Glass Mount
FPF2-90R
Allow 15-18mm Gap between gate & hinge panel
1/1
1
1
2
2
3
3
4
4
AA
BB
C
D
E
F
GG
HH
Inde
xQ
uant
ityM
ass
Part
Num
ber
Mat
eria
l Nam
eD
escr
iptio
n
Dra
wn
by:
Dat
e: Rev
Folio
9/21
/201
5
AD
MIN
Mas
s:G
ener
al T
oler
ance
s:
Gen
eral
Sur
face
Fin
ish:
Proj
ect:
C
A3
0.4k
g
ISO
276
8-1
Med
ium
-
-Gla
ss �
xed
bott
om p
ivot
Scal
e1
: 1
75-7
7 Ri
cket
ts R
dM
t Wav
erle
y VI
C 31
50Ph
: +61
3 8
562
0888
Fax:
+61
3 8
562
0899
Chec
ked
by:
FPF2
-90L
Mnf
Drw
No
1G
MC-
009
1025
1.A
Crow
ned
pivo
t pin
(M8
inte
rnal
thre
ad)
316
0.02
2kg
12
GM
C-01
310
255.
APo
ol g
ate
top
pivo
t bra
cket
- G
M 9
0L31
60.
349k
g1
3H
CM8C
20-3
16N
AH
exag
on S
ocke
t Cou
nter
sunk
Hea
d Sc
rew
ISO
106
42 -
316
- M8
× 20
316
0.01
0kg
1
A -
A
1
172
33
130
Return Panel
Gate
1/1
1
1
2
2
3
3
4
4
AA
BB
C
D
E
F
GG
HH
Inde
xQ
uant
ityM
ass
Part
Num
ber
Mat
eria
l Nam
eD
escr
iptio
n
Dra
wn
by:
Dat
e: Rev
Folio
9/21
/201
5
AD
MIN
Gen
eral
Tol
eran
ces:
Gen
eral
Sur
face
Fin
ish:
Proj
ect:
C
A3
ISO
276
8-1
Med
ium
-
-Gla
ss �
xed
bott
om p
ivot
Scal
e1
: 1
75-7
7 Ri
cket
ts R
dM
t Wav
erle
y VI
C 31
50Ph
: +61
3 8
562
0888
Fax:
+61
3 8
562
0899
Chec
ked
by:
Mnf
Drw
No
1G
MC-
009
1025
1.A
Crow
ned
pivo
t pin
(M8
inte
rnal
thre
ad)
316
0.02
2kg
12
GM
C-01
410
256.
APo
ol g
ate
top
pivo
t bra
cket
- G
M 9
0R31
60.
349k
g1
3H
CM8C
20-3
16N
AH
exag
on S
ocke
t Cou
nter
sunk
Hea
d Sc
rew
ISO
106
42 -
316
- M8
× 20
316
0.01
0kg
1
A -
A
1Not
es:
+ Su
rfac
e �n
ish
for G
MC-
012
indi
cate
d by
Pa
rt N
o. s
u�x
(PSS
/SSS
): +
PSS
= M
irror
pol
ishe
d #8
Ra
0.3µ
m +
SSS
= B
rush
ed s
atin
#4
Ra 0
.5µm
+ A
SME
Y14.
5 20
09
172
33
130
Return Panel
Gate
FPF2-90L Left confi guration FPF2-90R Right confi guration
148Ø20
R55
68
36
37
R80
HINGE PANEL GATE
148 Ø20
R55
6837
36
R80
Type A Type B
15 - 18Gate
Return Panel Return Panel
Gate Gate
B22page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
SOLACEby FGS
Solace Self Closing Gate Closer
Technical Details• Non Hold Open Pool Gate Closer suitable for outdoor use• Available in Base, Wall & Glass Mount options• Tested successfully to over 40,000 cycles and been subjected to temperatures ranging from -50 C to +550 C in FGS dedicated on site test lab• Tested by an independent NATA accredited lab and compliant with AS 1926-1 2012 • Supplied with Anti-Corrosion Seal• Suitable for 10 or 12mm glass thickness• Maximum Weight - 100kg• Maximum Panel Width - 1000mm• Dual Action - left or right handed• Two Valve Speed Adjustment Process
Available Finishes• 316 satin stainless steel• 316 polished stainless steel • Black
Specify at time of orderAvailable as part of a Solace Pool Gate Kit which includes all the hardware required for both top and bottom pivots and patches SOL KIT
• Required fi nish• Pool Fence confi guration• Base/Glass/Wall Mount• With Friction Fit Latch (PL4) or No Latch (NL)• With Pronto Gate in Clear or Crystal Clear 11
22
33
44
A
A
B
BCDEF
G
G
H
H
3°Ensure the gate is plumb and level and is in a closing position 2-3 degrees past the latching point as shown above. This is important to ensure proper functioning of the latch.
R12178
50 56168
1
22. Latching Speed
1. Initial Closing Speed
LATCHCLOSED
Valve 1
Valve 2
OPEN
Aerial View of Gate
B23page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
PL4
Glass to Glass Friction Fit Pool Gate Latch
Technical Details• Used on pool gates in 180 degree glass
to glass confi gurations • Suitable for 12mm glass.• Friction fi t, so no holes required for a strike/ latch panel and can be installed with any fi xed panel.
Available Finishes• 316 satin stainless steel• 316 polished stainless steel• Electroplated black • Special fi nishes upon request
Specify at time of order• Finish required• Order PL4 LOCK for lockable option
16mm Diamater Holes
B24page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
SOL WMSolace Wall Mount
Technical Details• Used when hinging a Pool Gate off a wall or
post• Fitted to the base of a pool gate to mount a
Solace Pool Gate Closer.• Supplied with Spindle Receiver Plate which is
adjusted from the underside of the fi tting using an M8 Ring Spanner. Torque to 14Nm
• Can be attached to a wall or post - use M6 countersunk Stainless Steel or 14G Wood Screws
Compatible with:• FPF1 Glass to Wall Top Pivot• Solace Pool Gate Closer
Available Finishes• 316 satin stainless steel• 316 polished stainless steel
• Black
Specify at time of order• Required fi nish
Available to be purchased as part of a Solace Self Closing Pool Gate Kit SOL KIT3 - Wall Mount
1/1
11
22
33
44
A
A
B
BCDEF
G
G
H
H
Index QuantityMassPart Number Material NameDescription
Drawn by:
Date:
Rev Folio
9/21/2015
ADMIN
Material: Mass:- General Tolerances:
General Surface Finish:
Project:
C
A3
0.3kg
ISO 2768-1 Medium
-
-Solace
Part Number: Scale1 : 1
Coating:-
Solace wall mount
75-77 Ricketts RdMt Waverley VIC 3150
Ph: +61 3 8562 0888 Fax: +61 3 8562 0899
Mnf Drawing No.:
Description:Checked by:
10245.A
SOL WM
MnfDrwNo1 GMC-003 10194.C Solace glass mount pivot - Spindle receiver 316 0.077kg 12 GMC-007 10244.B Solace wall mount - bottom 316 0.187kg 13 HFM5C10-316 NA Hexagon head �ange bolt DIN 6921 - M5 x 10 - 8.8 316 0.005kg 2
Notes:+ Surface �nish for GMC-003 indicated by Part No. su�x (PSS/SSS): + PSS = Mirror polished #8 Ra 0.3µm + SSS = Brushed satin #4 Ra 0.5µm+ ASME Y14.5 2009
98
42
42
13
46
988mm hex screws
63±2
25
28
1/1
11
22
33
44
A
A
B
BCDEF
G
G
H
H
Index QuantityMassPart Number Material NameDescription
Drawn by:
Date:
Rev Folio
9/21/2015
ADMIN
Material: Mass:- General Tolerances:
General Surface Finish:
Project:
C
A3
0.3kg
ISO 2768-1 Medium
-
-Glass �xed bottom pivot
Part Number: Scale1 : 1
Coating:-
Solace wall mount
75-77 Ricketts RdMt Waverley VIC 3150
Ph: +61 3 8562 0888 Fax: +61 3 8562 0899
Mnf Drawing No.:
Description:Checked by:
10245.A
SOL WM
MnfDrwNo1 GMC-003 10194.C Solace glass mount pivot - Spindle receiver 316 0.077kg 12 GMC-007 10244.B Solace wall mount - bottom 316 0.187kg 13 HFM5C10-316 NA Hexagon head �ange bolt DIN 6921 - M5 x 10 - 8.8 316 0.005kg 2
Notes:+ Surface �nish for GMC-003 indicated by Part No. su�x (PSS/SSS): + PSS = Mirror polished #8 Ra 0.3µm + SSS = Brushed satin #4 Ra 0.5µm+ ASME Y14.5 2009
98
42
42
13
46
988mm hex screws
63±2
1/1
11
22
33
44
A
A
B
BCDEF
G
G
H
H
Index QuantityMassPart Number Material NameDescription
Drawn by:
Date:
Rev Folio
9/21/2015
ADMIN
Material: Mass:- General Tolerances:
General Surface Finish:
Project:
C
A3
0.3kg
ISO 2768-1 Medium
-
-Glass �xed bottom pivot
Part Number: Scale1 : 1
Coating:-
Solace wall mount
75-77 Ricketts RdMt Waverley VIC 3150
Ph: +61 3 8562 0888 Fax: +61 3 8562 0899
Mnf Drawing No.:
Description:Checked by:
10245.A
SOL WM
MnfDrwNo1 GMC-003 10194.C Solace glass mount pivot - Spindle receiver 316 0.077kg 12 GMC-007 10244.B Solace wall mount - bottom 316 0.187kg 13 HFM5C10-316 NA Hexagon head �ange bolt DIN 6921 - M5 x 10 - 8.8 316 0.005kg 2
Notes:+ Surface �nish for GMC-003 indicated by Part No. su�x (PSS/SSS): + PSS = Mirror polished #8 Ra 0.3µm + SSS = Brushed satin #4 Ra 0.5µm+ ASME Y14.5 2009
98
42
42
13
46
98 11
22
33
44
A
A
B
BCDEF
G
G
H
H
3°
Ensure the gate is plumb and level and is in a closing position 2-3 degrees past the latching point as shown above. This is important to ensure proper functioning of the latch.
B25page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
SOL GM 180Solace Glass Mount 180 degree
Technical Details• Used when hinging a Pool Gate off another
Glass Panel• Fitted to the base of a pool gate and hinge
panel to mount a Solace Pool Gate Closer.• Supplied with Spindle Receiver Plate which is
adjusted from the underside of the fi tting using an M8 Ring Spanner. Torque to 14Nm
Compatible with:• FPF2-180 Glass to Glass Top Pivot• Solace Pool Gate Closer
Available Finishes• 316 satin stainless steel• 316 polished stainless steel • Electroplated black
Specify at time of order• Required fi nish
Available to be purchased as part of a Solace Self Closing Pool Gate Kit SOL KIT4 - Glass Mount
1/1
1122
33
44
A
A
B
BCDEF
G
G
H
H
Index Quantity
2 11 1
4 1
8 27 2
Mass
0.799kg0.077kg
0.595kg
0.005kg0.020kg
6 20.030kg
3 20.002kg
Part Number Material NameDescription
GMC-001 316Solace glass mount pivot 180 - Main bracketGMC-003 316Solace glass mount pivot - Spindle receiver
GMC-002 316Solace glass mount pivot 180 - Clamping plate
HFM5C10-316 316Hexagon head �ange bolt DIN 6921 - M5 x 10 - 8.8HCM10C25-316 316Hexagon Socket Countersunk Head Screw ISO 10642 - 316 - M10 × 25GMC-004 Teadit NA-1100Solace glass mount pivot - Gasket
GMC-005 Polyamide 6-6 (2.5% C)Plain bush, Nylon 6-6 2.5% C, 14 × 20 × 12
Drawn by:
Date:
Rev Folio
9/21/2015
ADMIN
Material: Mass:- General Tolerances:
General Surface Finish:
Project:
E
A3
1.6kg
ISO 2768-1 Medium
-
-Glass �xed bottom pivot
Part Number: Scale1 : 2
Coating:-
Solace glass mount pivot 180 - Assembly
75-77 Ricketts RdMt Waverley VIC 3150
Ph: +61 3 8562 0888 Fax: +61 3 8562 0899
Mnf Drawing No.:
Description:Checked by:
10196.A
SOL GM 180
MnfDrwNo
10195.C
10198.C
10194.C
10200.C
10197.C
NANA
Index Date Author Comment
Notes:+ GMC-004 �xed to GMC-002 via double sided tape Nitto VR-5311
C
C
33
280
84
181
98
A 9/21/2015 ADMIN
1/1
11
22
33
44
A
A
B
BCDEF
G
G
H
H
Index Quantity
2 11 1
4 1
8 27 2
Mass
0.799kg0.077kg
0.595kg
0.005kg0.020kg
6 20.030kg
3 20.002kg
Part Number Material NameDescription
GMC-001 316Solace glass mount pivot 180 - Main bracketGMC-003 316Solace glass mount pivot - Spindle receiver
GMC-002 316Solace glass mount pivot 180 - Clamping plate
HFM5C10-316 316Hexagon head �ange bolt DIN 6921 - M5 x 10 - 8.8HCM10C25-316 316Hexagon Socket Countersunk Head Screw ISO 10642 - 316 - M10 × 25GMC-004 Teadit NA-1100Solace glass mount pivot - Gasket
GMC-005 Polyamide 6-6 (2.5% C)Plain bush, Nylon 6-6 2.5% C, 14 × 20 × 12
Drawn by:
Date:
Rev Folio
9/21/2015
ADMIN
Material: Mass:- General Tolerances:
General Surface Finish:
Project:
E
A3
1.6kg
ISO 2768-1 Medium
-
-Glass �xed bottom pivot
Part Number: Scale1 : 2
Coating:-
Solace glass mount pivot 180 - Assembly
75-77 Ricketts RdMt Waverley VIC 3150
Ph: +61 3 8562 0888 Fax: +61 3 8562 0899
Mnf Drawing No.:
Description:Checked by:
10196.A
SOL GM 180
MnfDrwNo
10195.C
10198.C
10194.C
10200.C
10197.C
NANA
Index Date Author Comment
Notes:+ GMC-004 �xed to GMC-002 via double sided tape Nitto VR-5311
C
C
33
280
84
181
98
A 9/21/2015 ADMIN
11
22
33
44
A
A
B
BCDEFG
G
H
H
3°
Ensure the gate is plumb and level and is in a closing position 2-3 degrees past the latching point as shown above. This is important to ensure proper functioning of the latch.
75 - 77 Ricketts Rd, Mt Waverley VIC 3149 T. 03 8562 0888 F. 03 8562 0899 Toll Free. 1800 099 918 Email. [email protected] www.fgs.com.au
Glass OrderCompany Name:
Fethers Fax No. 03 8562 0899Fethers Order No.:
Panel Style:
Quantity:
Thickness & Type: mm Toughened
Edgework:
Glass Marked:
Comments:
Drawing No.:
Pool Hinge Panel to suit Glass Mount Solace Closer
12
34
CDEFGH
Material:Clear toughened glass
Part Number:
Coating:-
1200mm Hinge Panel Solace Glass Mount
Ph: +61 3 8562 0888
Mnf Drawing No.:
Description:
10178.A.2
HP-1200 SOL GM
36
Ø20
R55
R80
68
Ø212 x
* 12mm clear toughened glass
91 4637
148
GLASS DETAIL - HINGE PANEL
B26page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
SOL GM 90(Left or Right)
SOL GM 90L
SOL GM 90R
Solace Glass Mount 90 degree
Technical Details• Used when hinging a Pool Gate off another
Glass Panel at 90 degrees• Fitted to the base of a pool gate and hinge
panel to mount a Solace Pool Gate Closer.• Supplied with Spindle Receiver Plate which is
adjusted from the underside of the fi tting using an M8 Ring Spanner. Torque to 14Nm
• Left and Right confi gurations available
Compatible with:• FPF2-90 Glass to Glass Top Pivot• Solace Pool Gate Closer
Available Finishes• 316 satin stainless steel• 316 polished stainless steel • Electroplated black
Specify at time of order• Required fi nish• SOL GM 90L - Left• SOL GM 90R - Right
Available to be purchased as part of a Solace Self Closing Pool Gate Kit SOL KIT7 - Glass Mount LeftSOL KIT8 - Glass Mount Right
SOL GM 90L - Glass Mount Left SOL GM 90R - Glass Mount Right
1/1
1
1
2
2
3
3
4
4
A A
B B
C
D
E
F
G G
H H
IndexQ
uantity
41
Mass
0.857kg
Part Num
berM
aterial Nam
eD
escription
GM
C-015316
Solace glass mount pivot 90R - M
ain bracket
Draw
n by:
Date:Rev
Folio
9/21/2015
AD
MIN
Material:
Mass:
-G
eneral Tolerances:
General Surface Finish:
Project:
C
A3
1.6kg
ISO 2768-1 M
edium
-
- Glass �xed bottom
pivot
Part Num
ber:Scale1 : 2
Coating:-
Solace glass mount 90R - A
ssembly
75-77 Ricketts RdM
t Waverley VIC 3150
Ph: +61 3 8562 0888Fax: +61 3 8562 0899
Mnf D
rawing N
o.:
Description:
Checked by:
10263.ASOL G
M 90R
1G
MC-003
Solace glass mount pivot - Spindle receiver
3160.077kg
1
3G
MC-005
Plain bush, Nylon 6-6 2.5%
C, 14 × 20 × 12Polyam
ide 6-6 (2.5% C)
0.002kg2
5G
MC-016
Solace glass mount pivot 90R - Clam
ping plate316
0.534kg1
2G
MC-004
Solace glass mount pivot - G
asketTeadit N
A-1100
0.030kg2
6H
CM10C25-316
Hexagon Socket Countersunk H
ead Screw ISO
10642 - 316 - M10 × 25
3160.020kg
27
HFM
5C10-316H
exagon head �ange bolt DIN
6921 - M5 x 10 - 8.8
3160.005kg
2
MnfD
rwN
o10194.C
10252.B10197.C
10253.B
10200.C
NA
NA
Notes:
+ GM
C-004 �xed to GM
C-016 via double sided tape N
itto VR-5311
IndexD
ateA
uthorCom
ment
B
B
A9/21/2015
AD
MIN
130
192
36
33
1/1
1
1
2
2
3
3
4
4
AA
BB
C
D
E
F
GG
HH
Inde
xQ
uant
ity
41
Mas
s
0.85
7kg
Part
Num
ber
Mat
eria
l Nam
eD
escr
iptio
n
GM
C-01
031
6So
lace
gla
ss m
ount
piv
ot 9
0L -
Mai
n br
acke
t
Dra
wn
by:
Dat
e: Rev
Folio
9/21
/201
5
AD
MIN
Mat
eria
l:M
ass:
-G
ener
al T
oler
ance
s:
Gen
eral
Sur
face
Fin
ish:
Proj
ect:
C
A3
1.6k
g
ISO
276
8-1
Med
ium
-
-Gla
ss �
xed
bott
om p
ivot
Part
Num
ber:
Scal
e1
: 2
Coat
ing:
-
Sola
ce g
lass
mou
nt 9
0L -
Ass
embl
y
75-7
7 Ri
cket
ts R
dM
t Wav
erle
y VI
C 31
50Ph
: +61
3 8
562
0888
Fax:
+61
3 8
562
0899
Mnf
Dra
win
g N
o.:
Des
crip
tion:
Chec
ked
by:
1026
2.A SO
L G
M 9
0L
1G
MC-
003
Sola
ce g
lass
mou
nt p
ivot
- Sp
indl
e re
ceiv
er31
60.
077k
g1
3G
MC-
005
Plai
n bu
sh, N
ylon
6-6
2.5
% C
, 14
× 20
× 1
2Po
lyam
ide
6-6
(2.5
% C
)0.
002k
g2
5G
MC-
011
Sola
ce g
lass
mou
nt p
ivot
90L
- Cl
ampi
ng p
late
316
0.53
4kg
1
2G
MC-
004
Sola
ce g
lass
mou
nt p
ivot
- G
aske
tTe
adit
NA
-110
00.
030k
g2
6H
CM10
C25-
316
Hex
agon
Soc
ket C
ount
ersu
nk H
ead
Scre
w IS
O 1
0642
- 31
6 - M
10 ×
25
316
0.02
0kg
27
HFM
5C10
-316
Hex
agon
hea
d �a
nge
bolt
DIN
692
1 - M
5 x
10 -
8.8
316
0.00
5kg
2
Mnf
Drw
No
1019
4.C
1025
2.B
1019
7.C
1025
3.B
1020
0.C
NA
NA
Inde
xD
ate
Aut
hor
Com
men
t
Not
es:
+ G
MC-
004
�xed
to G
MC-
011
via
doub
le s
ided
tape
Nitt
o VR
-531
1
B
B
A9/
21/2
015
AD
MIN
192
33
36
130
Hinge Panel
Gate Gate
Hinge Panel
11
22
33
44
A
A
B
BCDEF
G
G
H
H
3°
Ensure the gate is plumb and level and is in a closing position 2-3 degrees past the latching point as shown above. This is important to ensure proper functioning of the latch.
75 - 77 Ricketts Rd, Mt Waverley VIC 3149 T. 03 8562 0888 F. 03 8562 0899 Toll Free. 1800 099 918 Email. [email protected] www.fgs.com.au
Glass OrderCompany Name:
Fethers Fax No. 03 8562 0899Fethers Order No.:
Panel Style:
Quantity:
Thickness & Type: mm Toughened
Edgework:
Glass Marked:
Comments:
Drawing No.:
Pool Hinge Panel to suit Glass Mount Solace Closer
12
34
CDEFGH
Material:Clear toughened glass
Part Number:
Coating:-
1200mm Hinge Panel Solace Glass Mount
Ph: +61 3 8562 0888
Mnf Drawing No.:
Description:
10178.A.2
HP-1200 SOL GM
36
Ø20
R55
R80
68
Ø212 x
* 12mm clear toughened glass
91 4637
148
GLASS DETAIL - HINGE PANEL
B27page
© Copyright 2018 This document & its contents including images, drawings & specifi cation are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
MelbourneT.(03) 8562 0881E. [email protected]
Gold GoastT.(07) 5514 5700E. [email protected]
AdelaideT.(08) 8371 3100E. [email protected]
SOL PACKERSSolace 316 Stainless Steel Packers
Technical Details• Used with Solace Pool Gate Closer Base
Mount confi gurations• Made from solid 316 Stainless Steel• Used beneath the Solace Base Mount plate to raise the height • Position according to markings representing
latch end - this is important to ensure Base Mount Cover plates fi t correctly.
• Available in a range of thicknesses which can be used in combination to achieve desired height.
Available Finishes• Polished Stainless Steel• Satin Stainless Steel
Available Thicknesses• SOL SP1 - 1mm• SOL SP3 - 3mm• SOL SP5 - 5mm• SOL SP10 - 10mm
Specify at time of order•Thickness•Required Finish
11
22
33
44
A
ABC
D
D
110
48 14 10
10
Latch endØ104 x