AUSTRALIA - Silverlock · written consent of ACI Operations Pty Ltd. Customer hereby indemnifies...
1
Copyright ACI Operations Pty Ltd 2011. Not to be copied in whole or part without the prior written permission of ACI Operations Pty Ltd. This design drawing contains information which is confidential to ACI Operations Pty Ltd and must be used only as directed by ACI Operations Pty Ltd. This design drawing must not be disclosed to anyone without the prior written consent of ACI Operations Pty Ltd. Customer hereby indemnifies and holds ACI operations Pty Ltd ("ACI") harmless for any loss, damage or liability which ACI may incur if the design, manufacture and supply of the bottles in accordance with the instructions or requirements of customer infringes the intellectual property rights of any third party. SPECIFICATION AGREEMENTS ARE BASED ON TOLERANCED DIMENSIONS ONLY. DO NOT SCALE DRAWING. ALL DIMENSIONS ARE IN MILLIMETRES. AP_A2_WS_02 Pure Performance Packaging S A F E R E C Y C L A B L E S U S T A I N A B L E 15.4 Recommended max. label 191.3 330.0 #2.0 78.5 #1.6 212.0 4.6 71.4 #1.6 27.75 Punt 35.0 29.6 28.3 Contact 4.4 Bearing surface 62.3 63.0 12.8 3.0 DESIGN/CHECK REVISIONS DATE No CR Was 191.8. 30840-WS added to Note. Redrawn to latest format. 30 Mar 10 8 SJW/NB 05388-WS reference removed, Recycle logo added 23 Nov 11 9 MOULD/SAP NUMBER 05369 DRAWING NUMBER 05369-WS DATE CHECKED 30 Mar 10 DATE CR DESIGNER Stock 750ml Reverse Taper Claret DESIGN REFERENCE RETURNABLE NO PROCESS B&B MAX GAS VOLUME 0.0 FINISH DESIGNATION C001A Cork Mouth [GCM-39197] 748g CONTAINER WEIGHT 753.0ml # 5.6ml CONTAINER RATED CAPACITY ( FILLPOINT ) 772.0ml Nominal CONTAINER OVERFLOW CAPACITY ( BRIMFUL ) BRIMFUL VERIFIED YES MINIMUM THROUGH BORE 17.5 mm TILT ANGLE PREDICTED: 13.25 $ VERIFIED: 15.0 $ SURFACE TREATMENT PERMANENT VACUITY 2.5% SCALE 1:1 N.P.D. PROJECT NUMBER NPD-000224 A03 A01 PLANT MOULD EQUIPMENT ORDERED BY: N/A NNPB EQUIVALENT ASIA PACIFIC AUSTRALIA 36 Burwood Road Hawthorn VIC 3122 +61 3 9236 2311 Concept and Container Design Note: Refer to Glass Finish Specification for details of bore control. The fill point of this container is designed for a cork up to 50mm long. This container is manufactured with other finishes, refer 30840-WS. 753.0ml #5.6ml This container has a 18.5mm nominal bore to suit a table wine cork. OM-5 machine stipple in punt area. Recycle logo
Transcript of AUSTRALIA - Silverlock · written consent of ACI Operations Pty Ltd. Customer hereby indemnifies...
Copyright ACI Operations Pty Ltd 2011. Notto be copied in whole or part without the priorwritten permission of ACI Operations Pty Ltd. This design drawing contains informationwhich is confidential to ACI Operations Pty Ltdand must be used only as directed by ACIOperations Pty Ltd. This design drawing mustnot be disclosed to anyone without the prior written consent of ACI Operations Pty Ltd. Customer hereby indemnifies and holds ACIoperations Pty Ltd ("ACI") harmless for anyloss, damage or liability which ACI may incurif the design, manufacture and supply of the bottles in accordance with the instructions orrequirements of customer infringes theintellectual property rights of any third party. SPECIFICATION AGREEMENTS ARE BASED ON TOLERANCEDDIMENSIONS ONLY. DO NOT SCALE DRAWING.ALL DIMENSIONS ARE IN MILLIMETRES.
AP_A2_WS_02
Pure Performance
PackagingS A F E R E C Y C L A B L E S U S T A I N A B L E
15.4
Recommended max. label
191.3
330.0�#2.0
78.5�#1.6
212.0
4.6
71.4�#1.6
27.75
Punt
35.0
29.6
28.3
Contact
4.4
Bearing surface
62.3
63.0
12.8
3.0
DESIGN/CHECKREVISIONSDATENo
CRWas 191.8. 30840-WS added to Note. Redrawn to latest format.30 Mar 10 8 SJW/NB05388-WS reference removed, Recycle logo added 23 Nov 11 9 MOULD/SAP NUMBER
05369
DRAWING NUMBER
05369-WS
DATECHECKED
30 Mar 10DATECRDESIGNER
Stock
750ml Reverse Taper Claret
DESIGN REFERENCE
RETURNABLENO
PROCESS B&B
MAX GAS VOLUME0.0
FINISH DESIGNATION C001A Cork Mouth
[GCM-39197]
748g
CONTAINER WEIGHT
753.0ml �# 5.6ml
CONTAINER RATED CAPACITY ( FILLPOINT )
772.0ml Nominal
CONTAINER OVERFLOW CAPACITY ( BRIMFUL )
BRIMFUL VERIFIEDYES
MINIMUM THROUGH BORE17.5 mm
TILT ANGLE
PREDICTED: 13.25�$
VERIFIED: 15.0 �$SURFACE TREATMENT
PERMANENT
VACUITY2.5%
SCALE1:1
N.P.D. PROJECT NUMBER NPD-000224
A03 A01 PLANT
MOULD EQUIPMENT ORDERED BY:
N/ANNPB EQUIVALENT
ASIA PACIFIC
AUSTRALIA
36 Burwood Road Hawthorn VIC 3122+61 3 9236 2311
Concept and Container Design
Note: Refer to Glass Finish Specification fordetails of bore control. The fill point of this container is designed for a cork up to 50mm long. This container is manufactured with other finishes, refer 30840-WS.
753.0ml �#5.6ml
This container has a 18.5mm nominal bore to suit a table wine cork.
OM-5 machine stipplein punt area.
Recycle logo
u105423
Marketing Approved
